mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-11-01 08:58:07 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/scsi/libsas/sas_internal.h
John Garry 15ba7806c3 scsi: libsas: Drop SAS_DPRINTK() and revise logs levels 
Like sas_printk() did previously, SAS_DPRINTK() offers little value now
that libsas logs already have the "sas" prefix through pr_fmt(fmt). So it
can be dropped.

However, after reviewing some logs in libsas, it is noticed that debug
level is too low in many instances.

So this change drops SAS_DPRINTK() and revises some logs to a more
appropriate level. However many stay at debug level, although some
are significantly promoted.

We add -DDEBUG for compilation so that we keep the debug messages by
default, as before.

All the pre-existing checkpatch errors for spanning messages across
multiple lines are also fixed.

Finally, all other references to printk() [apart from special formatting
in sas_ata.c] are removed and replaced with appropriate pr_xxx().

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-15 14:37:06 -05:00

209 lines
6.6 KiB
C
Raw Blame History

/*
* Serial Attached SCSI (SAS) class internal header file
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* This file is licensed under GPLv2.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
* USA
*
*/
#ifndef _SAS_INTERNAL_H_
#define _SAS_INTERNAL_H_
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_sas.h>
#include <scsi/libsas.h>
#include <scsi/sas_ata.h>
#ifdef pr_fmt
#undef pr_fmt
#endif
#define SAS_FMT "sas: "
#define pr_fmt(fmt) SAS_FMT fmt
#define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble)
#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
struct sas_phy_data {
/* let reset be performed in sas_queue_work() context */
struct sas_phy *phy;
struct mutex event_lock;
int hard_reset;
int reset_result;
struct sas_work reset_work;
int enable;
int enable_result;
struct sas_work enable_work;
};
void sas_scsi_recover_host(struct Scsi_Host *shost);
int sas_show_class(enum sas_class class, char *buf);
int sas_show_proto(enum sas_protocol proto, char *buf);
int sas_show_linkrate(enum sas_linkrate linkrate, char *buf);
int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
int sas_register_phys(struct sas_ha_struct *sas_ha);
void sas_unregister_phys(struct sas_ha_struct *sas_ha);
struct asd_sas_event *sas_alloc_event(struct asd_sas_phy *phy);
void sas_free_event(struct asd_sas_event *event);
int sas_register_ports(struct sas_ha_struct *sas_ha);
void sas_unregister_ports(struct sas_ha_struct *sas_ha);
int sas_init_events(struct sas_ha_struct *sas_ha);
void sas_disable_revalidation(struct sas_ha_struct *ha);
void sas_enable_revalidation(struct sas_ha_struct *ha);
void __sas_drain_work(struct sas_ha_struct *ha);
void sas_deform_port(struct asd_sas_phy *phy, int gone);
void sas_porte_bytes_dmaed(struct work_struct *work);
void sas_porte_broadcast_rcvd(struct work_struct *work);
void sas_porte_link_reset_err(struct work_struct *work);
void sas_porte_timer_event(struct work_struct *work);
void sas_porte_hard_reset(struct work_struct *work);
int sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw);
int sas_notify_lldd_dev_found(struct domain_device *);
void sas_notify_lldd_dev_gone(struct domain_device *);
void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
struct sas_rphy *rphy);
int sas_smp_phy_control(struct domain_device *dev, int phy_id,
enum phy_func phy_func, struct sas_phy_linkrates *);
int sas_smp_get_phy_events(struct sas_phy *phy);
int sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event);
void sas_device_set_phy(struct domain_device *dev, struct sas_port *port);
struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id);
int sas_ex_phy_discover(struct domain_device *dev, int single);
int sas_get_report_phy_sata(struct domain_device *dev, int phy_id,
struct smp_resp *rps_resp);
int sas_try_ata_reset(struct asd_sas_phy *phy);
void sas_hae_reset(struct work_struct *work);
void sas_free_device(struct kref *kref);
void sas_destruct_devices(struct asd_sas_port *port);
extern const work_func_t sas_phy_event_fns[PHY_NUM_EVENTS];
extern const work_func_t sas_port_event_fns[PORT_NUM_EVENTS];
#ifdef CONFIG_SCSI_SAS_HOST_SMP
extern void sas_smp_host_handler(struct bsg_job *job, struct Scsi_Host *shost);
#else
static inline void sas_smp_host_handler(struct bsg_job *job,
struct Scsi_Host *shost)
{
shost_printk(KERN_ERR, shost,
"Cannot send SMP to a sas host (not enabled in CONFIG)\n");
bsg_job_done(job, -EINVAL, 0);
}
#endif
static inline void sas_fail_probe(struct domain_device *dev, const char *func, int err)
{
pr_warn("%s: for %s device %16llx returned %d\n",
func, dev->parent ? "exp-attached" :
"direct-attached",
SAS_ADDR(dev->sas_addr), err);
sas_unregister_dev(dev->port, dev);
}
static inline void sas_fill_in_rphy(struct domain_device *dev,
struct sas_rphy *rphy)
{
rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
rphy->identify.initiator_port_protocols = dev->iproto;
rphy->identify.target_port_protocols = dev->tproto;
switch (dev->dev_type) {
case SAS_SATA_DEV:
/* FIXME: need sata device type */
case SAS_END_DEVICE:
case SAS_SATA_PENDING:
rphy->identify.device_type = SAS_END_DEVICE;
break;
case SAS_EDGE_EXPANDER_DEVICE:
rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
break;
case SAS_FANOUT_EXPANDER_DEVICE:
rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
break;
default:
rphy->identify.device_type = SAS_PHY_UNUSED;
break;
}
}
static inline void sas_phy_set_target(struct asd_sas_phy *p, struct domain_device *dev)
{
struct sas_phy *phy = p->phy;
if (dev) {
if (dev_is_sata(dev))
phy->identify.device_type = SAS_END_DEVICE;
else
phy->identify.device_type = dev->dev_type;
phy->identify.target_port_protocols = dev->tproto;
} else {
phy->identify.device_type = SAS_PHY_UNUSED;
phy->identify.target_port_protocols = 0;
}
}
static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
{
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
if (!ex->parent_port) {
ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
/* FIXME: error handling */
BUG_ON(!ex->parent_port);
BUG_ON(sas_port_add(ex->parent_port));
sas_port_mark_backlink(ex->parent_port);
}
sas_port_add_phy(ex->parent_port, ex_phy->phy);
}
static inline struct domain_device *sas_alloc_device(void)
{
struct domain_device *dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev) {
INIT_LIST_HEAD(&dev->siblings);
INIT_LIST_HEAD(&dev->dev_list_node);
INIT_LIST_HEAD(&dev->disco_list_node);
kref_init(&dev->kref);
spin_lock_init(&dev->done_lock);
}
return dev;
}
static inline void sas_put_device(struct domain_device *dev)
{
kref_put(&dev->kref, sas_free_device);
}
#endif /* _SAS_INTERNAL_H_ */
Reference in a new issue View git blame Copy permalink