Ido Schimmel 602b74eda8 mlxsw: spectrum_switchdev: Do not leak RIFs when removing bridge ... When a bridge device is removed, the VLANs are flushed from each configured port. This causes the ports to decrement the reference count on the associated FIDs (filtering identifier). If the reference count of a FID is 1 and it has a RIF (router interface), then this RIF is destroyed. However, if no port is member in the VLAN for which a RIF exists, then the RIF will continue to exist after the removal of the bridge. To reproduce: # ip link add name br0 type bridge vlan_filtering 1 # ip link set dev swp1 master br0 # ip link add link br0 name br0.10 type vlan id 10 # ip address add 192.0.2.0/24 dev br0.10 # ip link del dev br0 The RIF associated with br0.10 continues to exist. Fix this by iterating over all the bridge device uppers when it is destroyed and take care of destroying their RIFs. Fixes: 99f44bb352 ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2018-08-25 16:28:20 -07:00
..
mlx4	net/mlx4/en_rx: Mark expected switch fall-throughs	2018-08-07 17:54:20 -07:00
mlx5/core	net_sched: remove list_head from tc_action	2018-08-21 12:45:44 -07:00
mlxfw	net/mlxfw: Properly handle dependancy with non-loadable mlx5	2017-07-03 02:32:25 -07:00
mlxsw	mlxsw: spectrum_switchdev: Do not leak RIFs when removing bridge	2018-08-25 16:28:20 -07:00
Kconfig	Change Kconfig description	2017-08-14 11:18:16 -07:00
Makefile	Add the mlxfw module for Mellanox firmware flash process	2017-05-25 17:46:17 -04:00