linux-stable/arch/sparc/lib/M7memset.S
Babu Moger b3a04ed507 arch/sparc: Optimized memcpy, memset, copy_to_user, copy_from_user for M7/M8
New algorithm that takes advantage of the M7/M8 block init store
ASI, ie, overlapping pipelines and miss buffer filling.
Full details in code comments.

Signed-off-by: Babu Moger <babu.moger@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10 14:57:00 -07:00

352 lines
9.9 KiB
ArmAsm

/*
* M7memset.S: SPARC M7 optimized memset.
*
* Copyright (c) 2016, Oracle and/or its affiliates. All rights reserved.
*/
/*
* M7memset.S: M7 optimized memset.
*
* char *memset(sp, c, n)
*
* Set an array of n chars starting at sp to the character c.
* Return sp.
*
* Fast assembler language version of the following C-program for memset
* which represents the `standard' for the C-library.
*
* void *
* memset(void *sp1, int c, size_t n)
* {
* if (n != 0) {
* char *sp = sp1;
* do {
* *sp++ = (char)c;
* } while (--n != 0);
* }
* return (sp1);
* }
*
* The algorithm is as follows :
*
* For small 6 or fewer bytes stores, bytes will be stored.
*
* For less than 32 bytes stores, align the address on 4 byte boundary.
* Then store as many 4-byte chunks, followed by trailing bytes.
*
* For sizes greater than 32 bytes, align the address on 8 byte boundary.
* if (count >= 64) {
* store 8-bytes chunks to align the address on 64 byte boundary
* if (value to be set is zero && count >= MIN_ZERO) {
* Using BIS stores, set the first long word of each
* 64-byte cache line to zero which will also clear the
* other seven long words of the cache line.
* }
* else if (count >= MIN_LOOP) {
* Using BIS stores, set the first long word of each of
* ST_CHUNK cache lines (64 bytes each) before the main
* loop is entered.
* In the main loop, continue pre-setting the first long
* word of each cache line ST_CHUNK lines in advance while
* setting the other seven long words (56 bytes) of each
* cache line until fewer than ST_CHUNK*64 bytes remain.
* Then set the remaining seven long words of each cache
* line that has already had its first long word set.
* }
* store remaining data in 64-byte chunks until less than
* 64 bytes remain.
* }
* Store as many 8-byte chunks, followed by trailing bytes.
*
* BIS = Block Init Store
* Doing the advance store of the first element of the cache line
* initiates the displacement of a cache line while only using a single
* instruction in the pipeline. That avoids various pipeline delays,
* such as filling the miss buffer. The performance effect is
* similar to prefetching for normal stores.
* The special case for zero fills runs faster and uses fewer instruction
* cycles than the normal memset loop.
*
* We only use BIS for memset of greater than MIN_LOOP bytes because a sequence
* BIS stores must be followed by a membar #StoreStore. The benefit of
* the BIS store must be balanced against the cost of the membar operation.
*/
/*
* ASI_STBI_P marks the cache line as "least recently used"
* which means if many threads are active, it has a high chance
* of being pushed out of the cache between the first initializing
* store and the final stores.
* Thus, we use ASI_STBIMRU_P which marks the cache line as
* "most recently used" for all but the last store to the cache line.
*/
#include <asm/asi.h>
#include <asm/page.h>
#define ASI_STBI_P ASI_BLK_INIT_QUAD_LDD_P
#define ASI_STBIMRU_P ASI_ST_BLKINIT_MRU_P
#define ST_CHUNK 24 /* multiple of 4 due to loop unrolling */
#define MIN_LOOP 16320
#define MIN_ZERO 512
.section ".text"
.align 32
/*
* Define clear_page(dest) as memset(dest, 0, PAGE_SIZE)
* (can create a more optimized version later.)
*/
.globl M7clear_page
.globl M7clear_user_page
M7clear_page: /* clear_page(dest) */
M7clear_user_page:
set PAGE_SIZE, %o1
/* fall through into bzero code */
.size M7clear_page,.-M7clear_page
.size M7clear_user_page,.-M7clear_user_page
/*
* Define bzero(dest, n) as memset(dest, 0, n)
* (can create a more optimized version later.)
*/
.globl M7bzero
M7bzero: /* bzero(dest, size) */
mov %o1, %o2
mov 0, %o1
/* fall through into memset code */
.size M7bzero,.-M7bzero
.global M7memset
.type M7memset, #function
.register %g3, #scratch
M7memset:
mov %o0, %o5 ! copy sp1 before using it
cmp %o2, 7 ! if small counts, just write bytes
bleu,pn %xcc, .wrchar
and %o1, 0xff, %o1 ! o1 is (char)c
sll %o1, 8, %o3
or %o1, %o3, %o1 ! now o1 has 2 bytes of c
sll %o1, 16, %o3
cmp %o2, 32
blu,pn %xcc, .wdalign
or %o1, %o3, %o1 ! now o1 has 4 bytes of c
sllx %o1, 32, %o3
or %o1, %o3, %o1 ! now o1 has 8 bytes of c
.dbalign:
andcc %o5, 7, %o3 ! is sp1 aligned on a 8 byte bound?
bz,pt %xcc, .blkalign ! already long word aligned
sub %o3, 8, %o3 ! -(bytes till long word aligned)
add %o2, %o3, %o2 ! update o2 with new count
! Set -(%o3) bytes till sp1 long word aligned
1: stb %o1, [%o5] ! there is at least 1 byte to set
inccc %o3 ! byte clearing loop
bl,pt %xcc, 1b
inc %o5
! Now sp1 is long word aligned (sp1 is found in %o5)
.blkalign:
cmp %o2, 64 ! check if there are 64 bytes to set
blu,pn %xcc, .wrshort
mov %o2, %o3
andcc %o5, 63, %o3 ! is sp1 block aligned?
bz,pt %xcc, .blkwr ! now block aligned
sub %o3, 64, %o3 ! o3 is -(bytes till block aligned)
add %o2, %o3, %o2 ! o2 is the remainder
! Store -(%o3) bytes till dst is block (64 byte) aligned.
! Use long word stores.
! Recall that dst is already long word aligned
1:
addcc %o3, 8, %o3
stx %o1, [%o5]
bl,pt %xcc, 1b
add %o5, 8, %o5
! Now sp1 is block aligned
.blkwr:
andn %o2, 63, %o4 ! calculate size of blocks in bytes
brz,pn %o1, .wrzero ! special case if c == 0
and %o2, 63, %o3 ! %o3 = bytes left after blk stores.
set MIN_LOOP, %g1
cmp %o4, %g1 ! check there are enough bytes to set
blu,pn %xcc, .short_set ! to justify cost of membar
! must be > pre-cleared lines
nop
! initial cache-clearing stores
! get store pipeline moving
rd %asi, %g3 ! save %asi to be restored later
wr %g0, ASI_STBIMRU_P, %asi
! Primary memset loop for large memsets
.wr_loop:
sub %o5, 8, %o5 ! adjust %o5 for ASI store alignment
mov ST_CHUNK, %g1
.wr_loop_start:
stxa %o1, [%o5+8]%asi
subcc %g1, 4, %g1
stxa %o1, [%o5+8+64]%asi
add %o5, 256, %o5
stxa %o1, [%o5+8-128]%asi
bgu %xcc, .wr_loop_start
stxa %o1, [%o5+8-64]%asi
sub %o5, ST_CHUNK*64, %o5 ! reset %o5
mov ST_CHUNK, %g1
.wr_loop_rest:
stxa %o1, [%o5+8+8]%asi
sub %o4, 64, %o4
stxa %o1, [%o5+16+8]%asi
subcc %g1, 1, %g1
stxa %o1, [%o5+24+8]%asi
stxa %o1, [%o5+32+8]%asi
stxa %o1, [%o5+40+8]%asi
add %o5, 64, %o5
stxa %o1, [%o5-8]%asi
bgu %xcc, .wr_loop_rest
stxa %o1, [%o5]ASI_STBI_P
! If more than ST_CHUNK*64 bytes remain to set, continue
! setting the first long word of each cache line in advance
! to keep the store pipeline moving.
cmp %o4, ST_CHUNK*64
bge,pt %xcc, .wr_loop_start
mov ST_CHUNK, %g1
brz,a,pn %o4, .asi_done
add %o5, 8, %o5 ! restore %o5 offset
.wr_loop_small:
stxa %o1, [%o5+8]%asi
stxa %o1, [%o5+8+8]%asi
stxa %o1, [%o5+16+8]%asi
stxa %o1, [%o5+24+8]%asi
stxa %o1, [%o5+32+8]%asi
subcc %o4, 64, %o4
stxa %o1, [%o5+40+8]%asi
add %o5, 64, %o5
stxa %o1, [%o5-8]%asi
bgu,pt %xcc, .wr_loop_small
stxa %o1, [%o5]ASI_STBI_P
ba .asi_done
add %o5, 8, %o5 ! restore %o5 offset
! Special case loop for zero fill memsets
! For each 64 byte cache line, single STBI to first element
! clears line
.wrzero:
cmp %o4, MIN_ZERO ! check if enough bytes to set
! to pay %asi + membar cost
blu %xcc, .short_set
nop
sub %o4, 256, %o4
.wrzero_loop:
mov 64, %g3
stxa %o1, [%o5]ASI_STBI_P
subcc %o4, 256, %o4
stxa %o1, [%o5+%g3]ASI_STBI_P
add %o5, 256, %o5
sub %g3, 192, %g3
stxa %o1, [%o5+%g3]ASI_STBI_P
add %g3, 64, %g3
bge,pt %xcc, .wrzero_loop
stxa %o1, [%o5+%g3]ASI_STBI_P
add %o4, 256, %o4
brz,pn %o4, .bsi_done
nop
.wrzero_small:
stxa %o1, [%o5]ASI_STBI_P
subcc %o4, 64, %o4
bgu,pt %xcc, .wrzero_small
add %o5, 64, %o5
ba,a .bsi_done
.asi_done:
wr %g3, 0x0, %asi ! restored saved %asi
.bsi_done:
membar #StoreStore ! required by use of Block Store Init
.short_set:
cmp %o4, 64 ! check if 64 bytes to set
blu %xcc, 5f
nop
4: ! set final blocks of 64 bytes
stx %o1, [%o5]
stx %o1, [%o5+8]
stx %o1, [%o5+16]
stx %o1, [%o5+24]
subcc %o4, 64, %o4
stx %o1, [%o5+32]
stx %o1, [%o5+40]
add %o5, 64, %o5
stx %o1, [%o5-16]
bgu,pt %xcc, 4b
stx %o1, [%o5-8]
5:
! Set the remaining long words
.wrshort:
subcc %o3, 8, %o3 ! Can we store any long words?
blu,pn %xcc, .wrchars
and %o2, 7, %o2 ! calc bytes left after long words
6:
subcc %o3, 8, %o3
stx %o1, [%o5] ! store the long words
bgeu,pt %xcc, 6b
add %o5, 8, %o5
.wrchars: ! check for extra chars
brnz %o2, .wrfin
nop
retl
nop
.wdalign:
andcc %o5, 3, %o3 ! is sp1 aligned on a word boundary
bz,pn %xcc, .wrword
andn %o2, 3, %o3 ! create word sized count in %o3
dec %o2 ! decrement count
stb %o1, [%o5] ! clear a byte
b .wdalign
inc %o5 ! next byte
.wrword:
subcc %o3, 4, %o3
st %o1, [%o5] ! 4-byte writing loop
bnz,pt %xcc, .wrword
add %o5, 4, %o5
and %o2, 3, %o2 ! leftover count, if any
.wrchar:
! Set the remaining bytes, if any
brz %o2, .exit
nop
.wrfin:
deccc %o2
stb %o1, [%o5]
bgu,pt %xcc, .wrfin
inc %o5
.exit:
retl ! %o0 was preserved
nop
.size M7memset,.-M7memset