linux-stable/drivers/net/can/c_can/c_can_pci.c
Dario Binacchi 132f2d45fb can: c_can: add support to 64 message objects
D_CAN controller supports 16, 32, 64 or 128 message objects, comparing
to 32 on C_CAN. AM335x/AM437x Sitara processors and DRA7 SOC all
instantiate a D_CAN controller with 64 message objects, as described
in the "DCAN features" subsection of the CAN chapter of their
technical reference manuals.

The driver policy has been kept unchanged, and as in the previous
version, the first half of the message objects is used for reception
and the second for transmission.

The I/O load is increased only in the case of 64 message objects,
keeping it unchanged in the case of 32. Two 32-bit read accesses are
in fact required, which however remained at 16-bit for configurations
with 32 message objects.

Link: https://lore.kernel.org/r/20210302215435.18286-7-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-30 11:14:53 +02:00

297 lines
7 KiB
C

/*
* PCI bus driver for Bosch C_CAN/D_CAN controller
*
* Copyright (C) 2012 Federico Vaga <federico.vaga@gmail.com>
*
* Borrowed from c_can_platform.c
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/can/dev.h>
#include "c_can.h"
#define PCI_DEVICE_ID_PCH_CAN 0x8818
#define PCH_PCI_SOFT_RESET 0x01fc
enum c_can_pci_reg_align {
C_CAN_REG_ALIGN_16,
C_CAN_REG_ALIGN_32,
C_CAN_REG_32,
};
struct c_can_pci_data {
/* Specify if is C_CAN or D_CAN */
enum c_can_dev_id type;
/* Number of message objects */
unsigned int msg_obj_num;
/* Set the register alignment in the memory */
enum c_can_pci_reg_align reg_align;
/* Set the frequency */
unsigned int freq;
/* PCI bar number */
int bar;
/* Callback for reset */
void (*init)(const struct c_can_priv *priv, bool enable);
};
/* 16-bit c_can registers can be arranged differently in the memory
* architecture of different implementations. For example: 16-bit
* registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
* Handle the same by providing a common read/write interface.
*/
static u16 c_can_pci_read_reg_aligned_to_16bit(const struct c_can_priv *priv,
enum reg index)
{
return readw(priv->base + priv->regs[index]);
}
static void c_can_pci_write_reg_aligned_to_16bit(const struct c_can_priv *priv,
enum reg index, u16 val)
{
writew(val, priv->base + priv->regs[index]);
}
static u16 c_can_pci_read_reg_aligned_to_32bit(const struct c_can_priv *priv,
enum reg index)
{
return readw(priv->base + 2 * priv->regs[index]);
}
static void c_can_pci_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
enum reg index, u16 val)
{
writew(val, priv->base + 2 * priv->regs[index]);
}
static u16 c_can_pci_read_reg_32bit(const struct c_can_priv *priv,
enum reg index)
{
return (u16)ioread32(priv->base + 2 * priv->regs[index]);
}
static void c_can_pci_write_reg_32bit(const struct c_can_priv *priv,
enum reg index, u16 val)
{
iowrite32((u32)val, priv->base + 2 * priv->regs[index]);
}
static u32 c_can_pci_read_reg32(const struct c_can_priv *priv, enum reg index)
{
u32 val;
val = priv->read_reg(priv, index);
val |= ((u32)priv->read_reg(priv, index + 1)) << 16;
return val;
}
static void c_can_pci_write_reg32(const struct c_can_priv *priv, enum reg index,
u32 val)
{
priv->write_reg(priv, index + 1, val >> 16);
priv->write_reg(priv, index, val);
}
static void c_can_pci_reset_pch(const struct c_can_priv *priv, bool enable)
{
if (enable) {
u32 __iomem *addr = priv->base + PCH_PCI_SOFT_RESET;
/* write to sw reset register */
iowrite32(1, addr);
iowrite32(0, addr);
}
}
static int c_can_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct c_can_pci_data *c_can_pci_data = (void *)ent->driver_data;
struct c_can_priv *priv;
struct net_device *dev;
void __iomem *addr;
int ret;
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "pci_enable_device FAILED\n");
goto out;
}
ret = pci_request_regions(pdev, KBUILD_MODNAME);
if (ret) {
dev_err(&pdev->dev, "pci_request_regions FAILED\n");
goto out_disable_device;
}
ret = pci_enable_msi(pdev);
if (!ret) {
dev_info(&pdev->dev, "MSI enabled\n");
pci_set_master(pdev);
}
addr = pci_iomap(pdev, c_can_pci_data->bar,
pci_resource_len(pdev, c_can_pci_data->bar));
if (!addr) {
dev_err(&pdev->dev,
"device has no PCI memory resources, failing adapter\n");
ret = -ENOMEM;
goto out_release_regions;
}
/* allocate the c_can device */
dev = alloc_c_can_dev(c_can_pci_data->msg_obj_num);
if (!dev) {
ret = -ENOMEM;
goto out_iounmap;
}
priv = netdev_priv(dev);
pci_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
dev->irq = pdev->irq;
priv->base = addr;
priv->device = &pdev->dev;
if (!c_can_pci_data->freq) {
dev_err(&pdev->dev, "no clock frequency defined\n");
ret = -ENODEV;
goto out_free_c_can;
} else {
priv->can.clock.freq = c_can_pci_data->freq;
}
/* Configure CAN type */
switch (c_can_pci_data->type) {
case BOSCH_C_CAN:
priv->regs = reg_map_c_can;
break;
case BOSCH_D_CAN:
priv->regs = reg_map_d_can;
break;
default:
ret = -EINVAL;
goto out_free_c_can;
}
priv->type = c_can_pci_data->type;
/* Configure access to registers */
switch (c_can_pci_data->reg_align) {
case C_CAN_REG_ALIGN_32:
priv->read_reg = c_can_pci_read_reg_aligned_to_32bit;
priv->write_reg = c_can_pci_write_reg_aligned_to_32bit;
break;
case C_CAN_REG_ALIGN_16:
priv->read_reg = c_can_pci_read_reg_aligned_to_16bit;
priv->write_reg = c_can_pci_write_reg_aligned_to_16bit;
break;
case C_CAN_REG_32:
priv->read_reg = c_can_pci_read_reg_32bit;
priv->write_reg = c_can_pci_write_reg_32bit;
break;
default:
ret = -EINVAL;
goto out_free_c_can;
}
priv->read_reg32 = c_can_pci_read_reg32;
priv->write_reg32 = c_can_pci_write_reg32;
priv->raminit = c_can_pci_data->init;
ret = register_c_can_dev(dev);
if (ret) {
dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
KBUILD_MODNAME, ret);
goto out_free_c_can;
}
dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
KBUILD_MODNAME, priv->regs, dev->irq);
return 0;
out_free_c_can:
free_c_can_dev(dev);
out_iounmap:
pci_iounmap(pdev, addr);
out_release_regions:
pci_disable_msi(pdev);
pci_clear_master(pdev);
pci_release_regions(pdev);
out_disable_device:
pci_disable_device(pdev);
out:
return ret;
}
static void c_can_pci_remove(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct c_can_priv *priv = netdev_priv(dev);
void __iomem *addr = priv->base;
unregister_c_can_dev(dev);
free_c_can_dev(dev);
pci_iounmap(pdev, addr);
pci_disable_msi(pdev);
pci_clear_master(pdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
}
static const struct c_can_pci_data c_can_sta2x11 = {
.type = BOSCH_C_CAN,
.msg_obj_num = 32,
.reg_align = C_CAN_REG_ALIGN_32,
.freq = 52000000, /* 52 Mhz */
.bar = 0,
};
static const struct c_can_pci_data c_can_pch = {
.type = BOSCH_C_CAN,
.msg_obj_num = 32,
.reg_align = C_CAN_REG_32,
.freq = 50000000, /* 50 MHz */
.init = c_can_pci_reset_pch,
.bar = 1,
};
#define C_CAN_ID(_vend, _dev, _driverdata) { \
PCI_DEVICE(_vend, _dev), \
.driver_data = (unsigned long)&(_driverdata), \
}
static const struct pci_device_id c_can_pci_tbl[] = {
C_CAN_ID(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_CAN,
c_can_sta2x11),
C_CAN_ID(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PCH_CAN,
c_can_pch),
{},
};
static struct pci_driver c_can_pci_driver = {
.name = KBUILD_MODNAME,
.id_table = c_can_pci_tbl,
.probe = c_can_pci_probe,
.remove = c_can_pci_remove,
};
module_pci_driver(c_can_pci_driver);
MODULE_AUTHOR("Federico Vaga <federico.vaga@gmail.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("PCI CAN bus driver for Bosch C_CAN/D_CAN controller");
MODULE_DEVICE_TABLE(pci, c_can_pci_tbl);