mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
![Ben Dooks](/assets/img/avatar_default.png)
Split the optional memory check code out of the pm.c file as it is quite a big #ifdef block and as-such can be moved out and simply compiled when the configuration is set. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
556 lines
13 KiB
C
556 lines
13 KiB
C
/* linux/arch/arm/plat-s3c24xx/pm.c
|
|
*
|
|
* Copyright (c) 2004,2006 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* S3C24XX Power Manager (Suspend-To-RAM) support
|
|
*
|
|
* See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* Parts based on arch/arm/mach-pxa/pm.c
|
|
*
|
|
* Thanks to Dimitry Andric for debugging
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/time.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/cacheflush.h>
|
|
#include <mach/hardware.h>
|
|
|
|
#include <plat/regs-serial.h>
|
|
#include <mach/regs-clock.h>
|
|
#include <mach/regs-gpio.h>
|
|
#include <mach/regs-mem.h>
|
|
#include <mach/regs-irq.h>
|
|
|
|
#include <asm/mach/time.h>
|
|
|
|
#include <plat/pm.h>
|
|
|
|
|
|
#define PFX "s3c24xx-pm: "
|
|
|
|
static struct sleep_save core_save[] = {
|
|
SAVE_ITEM(S3C2410_LOCKTIME),
|
|
SAVE_ITEM(S3C2410_CLKCON),
|
|
|
|
/* we restore the timings here, with the proviso that the board
|
|
* brings the system up in an slower, or equal frequency setting
|
|
* to the original system.
|
|
*
|
|
* if we cannot guarantee this, then things are going to go very
|
|
* wrong here, as we modify the refresh and both pll settings.
|
|
*/
|
|
|
|
SAVE_ITEM(S3C2410_BWSCON),
|
|
SAVE_ITEM(S3C2410_BANKCON0),
|
|
SAVE_ITEM(S3C2410_BANKCON1),
|
|
SAVE_ITEM(S3C2410_BANKCON2),
|
|
SAVE_ITEM(S3C2410_BANKCON3),
|
|
SAVE_ITEM(S3C2410_BANKCON4),
|
|
SAVE_ITEM(S3C2410_BANKCON5),
|
|
|
|
#ifndef CONFIG_CPU_FREQ
|
|
SAVE_ITEM(S3C2410_CLKDIVN),
|
|
SAVE_ITEM(S3C2410_MPLLCON),
|
|
SAVE_ITEM(S3C2410_REFRESH),
|
|
#endif
|
|
SAVE_ITEM(S3C2410_UPLLCON),
|
|
SAVE_ITEM(S3C2410_CLKSLOW),
|
|
};
|
|
|
|
static struct gpio_sleep {
|
|
void __iomem *base;
|
|
unsigned int gpcon;
|
|
unsigned int gpdat;
|
|
unsigned int gpup;
|
|
} gpio_save[] = {
|
|
[0] = {
|
|
.base = S3C2410_GPACON,
|
|
},
|
|
[1] = {
|
|
.base = S3C2410_GPBCON,
|
|
},
|
|
[2] = {
|
|
.base = S3C2410_GPCCON,
|
|
},
|
|
[3] = {
|
|
.base = S3C2410_GPDCON,
|
|
},
|
|
[4] = {
|
|
.base = S3C2410_GPECON,
|
|
},
|
|
[5] = {
|
|
.base = S3C2410_GPFCON,
|
|
},
|
|
[6] = {
|
|
.base = S3C2410_GPGCON,
|
|
},
|
|
[7] = {
|
|
.base = S3C2410_GPHCON,
|
|
},
|
|
};
|
|
|
|
static struct sleep_save misc_save[] = {
|
|
SAVE_ITEM(S3C2410_DCLKCON),
|
|
};
|
|
|
|
#ifdef CONFIG_S3C2410_PM_DEBUG
|
|
|
|
#define SAVE_UART(va) \
|
|
SAVE_ITEM((va) + S3C2410_ULCON), \
|
|
SAVE_ITEM((va) + S3C2410_UCON), \
|
|
SAVE_ITEM((va) + S3C2410_UFCON), \
|
|
SAVE_ITEM((va) + S3C2410_UMCON), \
|
|
SAVE_ITEM((va) + S3C2410_UBRDIV)
|
|
|
|
static struct sleep_save uart_save[] = {
|
|
SAVE_UART(S3C24XX_VA_UART0),
|
|
SAVE_UART(S3C24XX_VA_UART1),
|
|
#ifndef CONFIG_CPU_S3C2400
|
|
SAVE_UART(S3C24XX_VA_UART2),
|
|
#endif
|
|
};
|
|
|
|
/* debug
|
|
*
|
|
* we send the debug to printascii() to allow it to be seen if the
|
|
* system never wakes up from the sleep
|
|
*/
|
|
|
|
static void s3c2410_pm_debug_init(void)
|
|
{
|
|
unsigned long tmp = __raw_readl(S3C2410_CLKCON);
|
|
|
|
/* re-start uart clocks */
|
|
tmp |= S3C2410_CLKCON_UART0;
|
|
tmp |= S3C2410_CLKCON_UART1;
|
|
tmp |= S3C2410_CLKCON_UART2;
|
|
|
|
__raw_writel(tmp, S3C2410_CLKCON);
|
|
udelay(10);
|
|
}
|
|
|
|
#else
|
|
#define s3c2410_pm_debug_init() do { } while(0)
|
|
|
|
static struct sleep_save uart_save[] = {};
|
|
#endif
|
|
|
|
/* s3c2410_pm_show_resume_irqs
|
|
*
|
|
* print any IRQs asserted at resume time (ie, we woke from)
|
|
*/
|
|
|
|
static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
|
|
unsigned long mask)
|
|
{
|
|
int i;
|
|
|
|
which &= ~mask;
|
|
|
|
for (i = 0; i <= 31; i++) {
|
|
if ((which) & (1L<<i)) {
|
|
S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* s3c_pm_check_resume_pin
|
|
*
|
|
* check to see if the pin is configured correctly for sleep mode, and
|
|
* make any necessary adjustments if it is not
|
|
*/
|
|
|
|
static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
|
|
{
|
|
unsigned long irqstate;
|
|
unsigned long pinstate;
|
|
int irq = s3c2410_gpio_getirq(pin);
|
|
|
|
if (irqoffs < 4)
|
|
irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
|
|
else
|
|
irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
|
|
|
|
pinstate = s3c2410_gpio_getcfg(pin);
|
|
|
|
if (!irqstate) {
|
|
if (pinstate == S3C2410_GPIO_IRQ)
|
|
S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
|
|
} else {
|
|
if (pinstate == S3C2410_GPIO_IRQ) {
|
|
S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
|
|
s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* s3c2410_pm_configure_extint
|
|
*
|
|
* configure all external interrupt pins
|
|
*/
|
|
|
|
static void s3c2410_pm_configure_extint(void)
|
|
{
|
|
int pin;
|
|
|
|
/* for each of the external interrupts (EINT0..EINT15) we
|
|
* need to check wether it is an external interrupt source,
|
|
* and then configure it as an input if it is not
|
|
*/
|
|
|
|
for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
|
|
s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
|
|
}
|
|
|
|
for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
|
|
s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
|
|
}
|
|
}
|
|
|
|
/* offsets for CON/DAT/UP registers */
|
|
|
|
#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON)
|
|
#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
|
|
#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
|
|
|
|
/* s3c2410_pm_save_gpios()
|
|
*
|
|
* Save the state of the GPIOs
|
|
*/
|
|
|
|
static void s3c2410_pm_save_gpios(void)
|
|
{
|
|
struct gpio_sleep *gps = gpio_save;
|
|
unsigned int gpio;
|
|
|
|
for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
|
|
void __iomem *base = gps->base;
|
|
|
|
gps->gpcon = __raw_readl(base + OFFS_CON);
|
|
gps->gpdat = __raw_readl(base + OFFS_DAT);
|
|
|
|
if (gpio > 0)
|
|
gps->gpup = __raw_readl(base + OFFS_UP);
|
|
|
|
}
|
|
}
|
|
|
|
/* Test whether the given masked+shifted bits of an GPIO configuration
|
|
* are one of the SFN (special function) modes. */
|
|
|
|
static inline int is_sfn(unsigned long con)
|
|
{
|
|
return (con == 2 || con == 3);
|
|
}
|
|
|
|
/* Test if the given masked+shifted GPIO configuration is an input */
|
|
|
|
static inline int is_in(unsigned long con)
|
|
{
|
|
return con == 0;
|
|
}
|
|
|
|
/* Test if the given masked+shifted GPIO configuration is an output */
|
|
|
|
static inline int is_out(unsigned long con)
|
|
{
|
|
return con == 1;
|
|
}
|
|
|
|
/* s3c2410_pm_restore_gpio()
|
|
*
|
|
* Restore one of the GPIO banks that was saved during suspend. This is
|
|
* not as simple as once thought, due to the possibility of glitches
|
|
* from the order that the CON and DAT registers are set in.
|
|
*
|
|
* The three states the pin can be are {IN,OUT,SFN} which gives us 9
|
|
* combinations of changes to check. Three of these, if the pin stays
|
|
* in the same configuration can be discounted. This leaves us with
|
|
* the following:
|
|
*
|
|
* { IN => OUT } Change DAT first
|
|
* { IN => SFN } Change CON first
|
|
* { OUT => SFN } Change CON first, so new data will not glitch
|
|
* { OUT => IN } Change CON first, so new data will not glitch
|
|
* { SFN => IN } Change CON first
|
|
* { SFN => OUT } Change DAT first, so new data will not glitch [1]
|
|
*
|
|
* We do not currently deal with the UP registers as these control
|
|
* weak resistors, so a small delay in change should not need to bring
|
|
* these into the calculations.
|
|
*
|
|
* [1] this assumes that writing to a pin DAT whilst in SFN will set the
|
|
* state for when it is next output.
|
|
*/
|
|
|
|
static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
|
|
{
|
|
void __iomem *base = gps->base;
|
|
unsigned long gps_gpcon = gps->gpcon;
|
|
unsigned long gps_gpdat = gps->gpdat;
|
|
unsigned long old_gpcon;
|
|
unsigned long old_gpdat;
|
|
unsigned long old_gpup = 0x0;
|
|
unsigned long gpcon;
|
|
int nr;
|
|
|
|
old_gpcon = __raw_readl(base + OFFS_CON);
|
|
old_gpdat = __raw_readl(base + OFFS_DAT);
|
|
|
|
if (base == S3C2410_GPACON) {
|
|
/* GPACON only has one bit per control / data and no PULLUPs.
|
|
* GPACON[x] = 0 => Output, 1 => SFN */
|
|
|
|
/* first set all SFN bits to SFN */
|
|
|
|
gpcon = old_gpcon | gps->gpcon;
|
|
__raw_writel(gpcon, base + OFFS_CON);
|
|
|
|
/* now set all the other bits */
|
|
|
|
__raw_writel(gps_gpdat, base + OFFS_DAT);
|
|
__raw_writel(gps_gpcon, base + OFFS_CON);
|
|
} else {
|
|
unsigned long old, new, mask;
|
|
unsigned long change_mask = 0x0;
|
|
|
|
old_gpup = __raw_readl(base + OFFS_UP);
|
|
|
|
/* Create a change_mask of all the items that need to have
|
|
* their CON value changed before their DAT value, so that
|
|
* we minimise the work between the two settings.
|
|
*/
|
|
|
|
for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
|
|
old = (old_gpcon & mask) >> nr;
|
|
new = (gps_gpcon & mask) >> nr;
|
|
|
|
/* If there is no change, then skip */
|
|
|
|
if (old == new)
|
|
continue;
|
|
|
|
/* If both are special function, then skip */
|
|
|
|
if (is_sfn(old) && is_sfn(new))
|
|
continue;
|
|
|
|
/* Change is IN => OUT, do not change now */
|
|
|
|
if (is_in(old) && is_out(new))
|
|
continue;
|
|
|
|
/* Change is SFN => OUT, do not change now */
|
|
|
|
if (is_sfn(old) && is_out(new))
|
|
continue;
|
|
|
|
/* We should now be at the case of IN=>SFN,
|
|
* OUT=>SFN, OUT=>IN, SFN=>IN. */
|
|
|
|
change_mask |= mask;
|
|
}
|
|
|
|
/* Write the new CON settings */
|
|
|
|
gpcon = old_gpcon & ~change_mask;
|
|
gpcon |= gps_gpcon & change_mask;
|
|
|
|
__raw_writel(gpcon, base + OFFS_CON);
|
|
|
|
/* Now change any items that require DAT,CON */
|
|
|
|
__raw_writel(gps_gpdat, base + OFFS_DAT);
|
|
__raw_writel(gps_gpcon, base + OFFS_CON);
|
|
__raw_writel(gps->gpup, base + OFFS_UP);
|
|
}
|
|
|
|
S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
|
|
index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
|
|
}
|
|
|
|
|
|
/** s3c2410_pm_restore_gpios()
|
|
*
|
|
* Restore the state of the GPIOs
|
|
*/
|
|
|
|
static void s3c2410_pm_restore_gpios(void)
|
|
{
|
|
struct gpio_sleep *gps = gpio_save;
|
|
int gpio;
|
|
|
|
for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
|
|
s3c2410_pm_restore_gpio(gpio, gps);
|
|
}
|
|
}
|
|
|
|
void (*pm_cpu_prep)(void);
|
|
void (*pm_cpu_sleep)(void);
|
|
|
|
#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
|
|
|
|
/* s3c2410_pm_enter
|
|
*
|
|
* central control for sleep/resume process
|
|
*/
|
|
|
|
static int s3c2410_pm_enter(suspend_state_t state)
|
|
{
|
|
unsigned long regs_save[16];
|
|
|
|
/* ensure the debug is initialised (if enabled) */
|
|
|
|
s3c2410_pm_debug_init();
|
|
|
|
S3C_PMDBG("s3c2410_pm_enter(%d)\n", state);
|
|
|
|
if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
|
|
printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* check if we have anything to wake-up with... bad things seem
|
|
* to happen if you suspend with no wakeup (system will often
|
|
* require a full power-cycle)
|
|
*/
|
|
|
|
if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
|
|
!any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
|
|
printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
|
|
printk(KERN_ERR PFX "Aborting sleep\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* prepare check area if configured */
|
|
|
|
s3c_pm_check_prepare();
|
|
|
|
/* store the physical address of the register recovery block */
|
|
|
|
s3c_sleep_save_phys = virt_to_phys(regs_save);
|
|
|
|
S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
|
|
|
|
/* save all necessary core registers not covered by the drivers */
|
|
|
|
s3c2410_pm_save_gpios();
|
|
s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
|
|
s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
|
|
s3c_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
|
|
|
|
/* set the irq configuration for wake */
|
|
|
|
s3c2410_pm_configure_extint();
|
|
|
|
S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n",
|
|
s3c_irqwake_intmask, s3c_irqwake_eintmask);
|
|
|
|
__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
|
|
__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
|
|
|
|
/* ack any outstanding external interrupts before we go to sleep */
|
|
|
|
__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
|
|
__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
|
|
__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
|
|
|
|
/* call cpu specific preparation */
|
|
|
|
pm_cpu_prep();
|
|
|
|
/* flush cache back to ram */
|
|
|
|
flush_cache_all();
|
|
|
|
s3c_pm_check_store();
|
|
|
|
/* send the cpu to sleep... */
|
|
|
|
__raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
|
|
|
|
/* s3c2410_cpu_save will also act as our return point from when
|
|
* we resume as it saves its own register state, so use the return
|
|
* code to differentiate return from save and return from sleep */
|
|
|
|
if (s3c2410_cpu_save(regs_save) == 0) {
|
|
flush_cache_all();
|
|
pm_cpu_sleep();
|
|
}
|
|
|
|
/* restore the cpu state */
|
|
|
|
cpu_init();
|
|
|
|
/* restore the system state */
|
|
|
|
s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
|
|
s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
|
|
s3c_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
|
|
s3c2410_pm_restore_gpios();
|
|
|
|
s3c2410_pm_debug_init();
|
|
|
|
/* check what irq (if any) restored the system */
|
|
|
|
S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
|
|
__raw_readl(S3C2410_SRCPND),
|
|
__raw_readl(S3C2410_EINTPEND));
|
|
|
|
s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
|
|
s3c_irqwake_intmask);
|
|
|
|
s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
|
|
s3c_irqwake_eintmask);
|
|
|
|
S3C_PMDBG("post sleep, preparing to return\n");
|
|
|
|
s3c_pm_check_restore();
|
|
|
|
/* ok, let's return from sleep */
|
|
|
|
S3C_PMDBG("S3C2410 PM Resume (post-restore)\n");
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_suspend_ops s3c2410_pm_ops = {
|
|
.enter = s3c2410_pm_enter,
|
|
.valid = suspend_valid_only_mem,
|
|
};
|
|
|
|
/* s3c2410_pm_init
|
|
*
|
|
* Attach the power management functions. This should be called
|
|
* from the board specific initialisation if the board supports
|
|
* it.
|
|
*/
|
|
|
|
int __init s3c2410_pm_init(void)
|
|
{
|
|
printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
|
|
|
|
suspend_set_ops(&s3c2410_pm_ops);
|
|
return 0;
|
|
}
|