mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Heiner Kallweit](/assets/img/avatar_default.png)
Make fb_sh1106 the first user of new macro FBTFT_REGISTER_SPI_DRIVER. In addition the MODULE_ALIASes can be removed. Module auto-loading was successfully tested with a SH1106-based OLED module connected to an Odroid C2. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/65516be1-9588-af00-cf4f-053e20af9b45@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
180 lines
4 KiB
C
180 lines
4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* FB driver for the SH1106 OLED Controller
|
|
* Based on the SSD1306 driver by Noralf Tronnes
|
|
*
|
|
* Copyright (C) 2017 Heiner Kallweit
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "fbtft.h"
|
|
|
|
#define DRVNAME "fb_sh1106"
|
|
#define WIDTH 128
|
|
#define HEIGHT 64
|
|
|
|
/* Init sequence based on the Adafruit SSD1306 Arduino library */
|
|
static int init_display(struct fbtft_par *par)
|
|
{
|
|
if (!par->info->var.xres || par->info->var.xres > WIDTH ||
|
|
!par->info->var.yres || par->info->var.yres > HEIGHT ||
|
|
par->info->var.yres % 8) {
|
|
dev_err(par->info->device, "Invalid screen size\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (par->info->var.rotate) {
|
|
dev_err(par->info->device, "Display rotation not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
par->fbtftops.reset(par);
|
|
|
|
/* Set Display OFF */
|
|
write_reg(par, 0xAE);
|
|
|
|
/* Set Display Clock Divide Ratio/ Oscillator Frequency */
|
|
write_reg(par, 0xD5, 0x80);
|
|
|
|
/* Set Multiplex Ratio */
|
|
write_reg(par, 0xA8, par->info->var.yres - 1);
|
|
|
|
/* Set Display Offset */
|
|
write_reg(par, 0xD3, 0x00);
|
|
|
|
/* Set Display Start Line */
|
|
write_reg(par, 0x40 | 0x0);
|
|
|
|
/* Set Segment Re-map */
|
|
/* column address 127 is mapped to SEG0 */
|
|
write_reg(par, 0xA0 | 0x1);
|
|
|
|
/* Set COM Output Scan Direction */
|
|
/* remapped mode. Scan from COM[N-1] to COM0 */
|
|
write_reg(par, 0xC8);
|
|
|
|
/* Set COM Pins Hardware Configuration */
|
|
if (par->info->var.yres == 64)
|
|
/* A[4]=1b, Alternative COM pin configuration */
|
|
write_reg(par, 0xDA, 0x12);
|
|
else if (par->info->var.yres == 48)
|
|
/* A[4]=1b, Alternative COM pin configuration */
|
|
write_reg(par, 0xDA, 0x12);
|
|
else
|
|
/* A[4]=0b, Sequential COM pin configuration */
|
|
write_reg(par, 0xDA, 0x02);
|
|
|
|
/* Set Pre-charge Period */
|
|
write_reg(par, 0xD9, 0xF1);
|
|
|
|
/* Set VCOMH Deselect Level */
|
|
write_reg(par, 0xDB, 0x40);
|
|
|
|
/* Set Display ON */
|
|
write_reg(par, 0xAF);
|
|
|
|
msleep(150);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
|
|
{
|
|
}
|
|
|
|
static int blank(struct fbtft_par *par, bool on)
|
|
{
|
|
fbtft_par_dbg(DEBUG_BLANK, par, "(%s=%s)\n",
|
|
__func__, on ? "true" : "false");
|
|
|
|
write_reg(par, on ? 0xAE : 0xAF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Gamma is used to control Contrast */
|
|
static int set_gamma(struct fbtft_par *par, u32 *curves)
|
|
{
|
|
/* apply mask */
|
|
curves[0] &= 0xFF;
|
|
|
|
/* Set Contrast Control for BANK0 */
|
|
write_reg(par, 0x81, curves[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
|
|
{
|
|
u16 *vmem16 = (u16 *)par->info->screen_buffer;
|
|
u32 xres = par->info->var.xres;
|
|
int page, page_start, page_end, x, i, ret;
|
|
u8 *buf = par->txbuf.buf;
|
|
|
|
/* offset refers to vmem with 2 bytes element size */
|
|
page_start = offset / (8 * 2 * xres);
|
|
page_end = DIV_ROUND_UP(offset + len, 8 * 2 * xres);
|
|
|
|
for (page = page_start; page < page_end; page++) {
|
|
/* set page and set column to 2 because of vidmem width 132 */
|
|
write_reg(par, 0xb0 | page, 0x00 | 2, 0x10 | 0);
|
|
|
|
memset(buf, 0, xres);
|
|
for (x = 0; x < xres; x++)
|
|
for (i = 0; i < 8; i++)
|
|
if (vmem16[(page * 8 + i) * xres + x])
|
|
buf[x] |= BIT(i);
|
|
|
|
/* Write data */
|
|
ret = fbtft_write_buf_dc(par, buf, xres, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void write_register(struct fbtft_par *par, int len, ...)
|
|
{
|
|
va_list args;
|
|
int i;
|
|
|
|
va_start(args, len);
|
|
|
|
for (i = 0; i < len; i++)
|
|
par->buf[i] = va_arg(args, unsigned int);
|
|
|
|
/* keep DC low for all command bytes to transfer */
|
|
fbtft_write_buf_dc(par, par->buf, len, 0);
|
|
|
|
va_end(args);
|
|
}
|
|
|
|
static struct fbtft_display display = {
|
|
.regwidth = 8,
|
|
.width = WIDTH,
|
|
.height = HEIGHT,
|
|
.txbuflen = WIDTH,
|
|
.gamma_num = 1,
|
|
.gamma_len = 1,
|
|
/* set default contrast to 0xcd = 80% */
|
|
.gamma = "cd",
|
|
.fbtftops = {
|
|
.write_vmem = write_vmem,
|
|
.write_register = write_register,
|
|
.init_display = init_display,
|
|
.set_addr_win = set_addr_win,
|
|
.blank = blank,
|
|
.set_gamma = set_gamma,
|
|
},
|
|
};
|
|
|
|
FBTFT_REGISTER_SPI_DRIVER(DRVNAME, "sinowealth", "sh1106", &display);
|
|
|
|
MODULE_DESCRIPTION("SH1106 OLED Driver");
|
|
MODULE_AUTHOR("Heiner Kallweit");
|
|
MODULE_LICENSE("GPL");
|