mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 03:10:12 +00:00
![Paulo Miguel Almeida](/assets/img/avatar_default.png)
Checkpatch reports: CHECK: struct mutex definition without comment. Fix this by documenting what rx_mutex struct is used for in pi433 driver. Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com> Link: https://lore.kernel.org/r/20220103232616.GA11161@mail.google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1367 lines
34 KiB
C
1367 lines
34 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* userspace interface for pi433 radio module
|
|
*
|
|
* Pi433 is a 433MHz radio module for the Raspberry Pi.
|
|
* It is based on the HopeRf Module RFM69CW. Therefore inside of this
|
|
* driver, you'll find an abstraction of the rf69 chip.
|
|
*
|
|
* If needed, this driver could be extended, to also support other
|
|
* devices, basing on HopeRfs rf69.
|
|
*
|
|
* The driver can also be extended, to support other modules of
|
|
* HopeRf with a similar interace - e. g. RFM69HCW, RFM12, RFM95, ...
|
|
*
|
|
* Copyright (C) 2016 Wolf-Entwicklungen
|
|
* Marcus Wolf <linux@wolf-entwicklungen.de>
|
|
*/
|
|
|
|
#undef DEBUG
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/ioctl.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/device.h>
|
|
#include <linux/cdev.h>
|
|
#include <linux/err.h>
|
|
#include <linux/kfifo.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/spi/spi.h>
|
|
#ifdef CONFIG_COMPAT
|
|
#include <linux/compat.h>
|
|
#endif
|
|
|
|
#include "pi433_if.h"
|
|
#include "rf69.h"
|
|
|
|
#define N_PI433_MINORS BIT(MINORBITS) /*32*/ /* ... up to 256 */
|
|
#define MAX_MSG_SIZE 900 /* min: FIFO_SIZE! */
|
|
#define MSG_FIFO_SIZE 65536 /* 65536 = 2^16 */
|
|
#define NUM_DIO 2
|
|
|
|
static dev_t pi433_dev;
|
|
static DEFINE_IDR(pi433_idr);
|
|
static DEFINE_MUTEX(minor_lock); /* Protect idr accesses */
|
|
|
|
static struct class *pi433_class; /* mainly for udev to create /dev/pi433 */
|
|
|
|
/*
|
|
* tx config is instance specific
|
|
* so with each open a new tx config struct is needed
|
|
*/
|
|
/*
|
|
* rx config is device specific
|
|
* so we have just one rx config, ebedded in device struct
|
|
*/
|
|
struct pi433_device {
|
|
/* device handling related values */
|
|
dev_t devt;
|
|
int minor;
|
|
struct device *dev;
|
|
struct cdev *cdev;
|
|
struct spi_device *spi;
|
|
|
|
/* irq related values */
|
|
struct gpio_desc *gpiod[NUM_DIO];
|
|
int irq_num[NUM_DIO];
|
|
u8 irq_state[NUM_DIO];
|
|
|
|
/* tx related values */
|
|
STRUCT_KFIFO_REC_1(MSG_FIFO_SIZE) tx_fifo;
|
|
struct mutex tx_fifo_lock; /* serialize userspace writers */
|
|
struct task_struct *tx_task_struct;
|
|
wait_queue_head_t tx_wait_queue;
|
|
u8 free_in_fifo;
|
|
char buffer[MAX_MSG_SIZE];
|
|
|
|
/* rx related values */
|
|
struct pi433_rx_cfg rx_cfg;
|
|
u8 *rx_buffer;
|
|
unsigned int rx_buffer_size;
|
|
u32 rx_bytes_to_drop;
|
|
u32 rx_bytes_dropped;
|
|
unsigned int rx_position;
|
|
struct mutex rx_lock; /* protects rx_* variable accesses */
|
|
wait_queue_head_t rx_wait_queue;
|
|
|
|
/* fifo wait queue */
|
|
struct task_struct *fifo_task_struct;
|
|
wait_queue_head_t fifo_wait_queue;
|
|
|
|
/* flags */
|
|
bool rx_active;
|
|
bool tx_active;
|
|
bool interrupt_rx_allowed;
|
|
};
|
|
|
|
struct pi433_instance {
|
|
struct pi433_device *device;
|
|
struct pi433_tx_cfg tx_cfg;
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* GPIO interrupt handlers */
|
|
static irqreturn_t DIO0_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct pi433_device *device = dev_id;
|
|
|
|
if (device->irq_state[DIO0] == DIO_PACKET_SENT) {
|
|
device->free_in_fifo = FIFO_SIZE;
|
|
dev_dbg(device->dev, "DIO0 irq: Packet sent\n");
|
|
wake_up_interruptible(&device->fifo_wait_queue);
|
|
} else if (device->irq_state[DIO0] == DIO_RSSI_DIO0) {
|
|
dev_dbg(device->dev, "DIO0 irq: RSSI level over threshold\n");
|
|
wake_up_interruptible(&device->rx_wait_queue);
|
|
} else if (device->irq_state[DIO0] == DIO_PAYLOAD_READY) {
|
|
dev_dbg(device->dev, "DIO0 irq: Payload ready\n");
|
|
device->free_in_fifo = 0;
|
|
wake_up_interruptible(&device->fifo_wait_queue);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t DIO1_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct pi433_device *device = dev_id;
|
|
|
|
if (device->irq_state[DIO1] == DIO_FIFO_NOT_EMPTY_DIO1) {
|
|
device->free_in_fifo = FIFO_SIZE;
|
|
} else if (device->irq_state[DIO1] == DIO_FIFO_LEVEL) {
|
|
if (device->rx_active)
|
|
device->free_in_fifo = FIFO_THRESHOLD - 1;
|
|
else
|
|
device->free_in_fifo = FIFO_SIZE - FIFO_THRESHOLD - 1;
|
|
}
|
|
dev_dbg(device->dev,
|
|
"DIO1 irq: %d bytes free in fifo\n", device->free_in_fifo);
|
|
wake_up_interruptible(&device->fifo_wait_queue);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int
|
|
rf69_set_rx_cfg(struct pi433_device *dev, struct pi433_rx_cfg *rx_cfg)
|
|
{
|
|
int ret;
|
|
int payload_length;
|
|
|
|
/* receiver config */
|
|
ret = rf69_set_frequency(dev->spi, rx_cfg->frequency);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_bit_rate(dev->spi, rx_cfg->bit_rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_modulation(dev->spi, rx_cfg->modulation);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_antenna_impedance(dev->spi, rx_cfg->antenna_impedance);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_rssi_threshold(dev->spi, rx_cfg->rssi_threshold);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_ook_threshold_dec(dev->spi, rx_cfg->threshold_decrement);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_bandwidth(dev->spi, rx_cfg->bw_mantisse,
|
|
rx_cfg->bw_exponent);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_bandwidth_during_afc(dev->spi, rx_cfg->bw_mantisse,
|
|
rx_cfg->bw_exponent);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_dagc(dev->spi, rx_cfg->dagc);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev->rx_bytes_to_drop = rx_cfg->bytes_to_drop;
|
|
|
|
/* packet config */
|
|
/* enable */
|
|
if (rx_cfg->enable_sync == OPTION_ON) {
|
|
ret = rf69_enable_sync(dev->spi);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = rf69_set_fifo_fill_condition(dev->spi,
|
|
after_sync_interrupt);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = rf69_disable_sync(dev->spi);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = rf69_set_fifo_fill_condition(dev->spi, always);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
if (rx_cfg->enable_length_byte == OPTION_ON) {
|
|
ret = rf69_set_packet_format(dev->spi, packet_length_var);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = rf69_set_packet_format(dev->spi, packet_length_fix);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
ret = rf69_set_address_filtering(dev->spi,
|
|
rx_cfg->enable_address_filtering);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (rx_cfg->enable_crc == OPTION_ON) {
|
|
ret = rf69_enable_crc(dev->spi);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = rf69_disable_crc(dev->spi);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* lengths */
|
|
ret = rf69_set_sync_size(dev->spi, rx_cfg->sync_length);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (rx_cfg->enable_length_byte == OPTION_ON) {
|
|
ret = rf69_set_payload_length(dev->spi, 0xff);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else if (rx_cfg->fixed_message_length != 0) {
|
|
payload_length = rx_cfg->fixed_message_length;
|
|
if (rx_cfg->enable_length_byte == OPTION_ON)
|
|
payload_length++;
|
|
if (rx_cfg->enable_address_filtering != filtering_off)
|
|
payload_length++;
|
|
ret = rf69_set_payload_length(dev->spi, payload_length);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = rf69_set_payload_length(dev->spi, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* values */
|
|
if (rx_cfg->enable_sync == OPTION_ON) {
|
|
ret = rf69_set_sync_values(dev->spi, rx_cfg->sync_pattern);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
if (rx_cfg->enable_address_filtering != filtering_off) {
|
|
ret = rf69_set_node_address(dev->spi, rx_cfg->node_address);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_broadcast_address(dev->spi,
|
|
rx_cfg->broadcast_address);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rf69_set_tx_cfg(struct pi433_device *dev, struct pi433_tx_cfg *tx_cfg)
|
|
{
|
|
int ret;
|
|
|
|
ret = rf69_set_frequency(dev->spi, tx_cfg->frequency);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_bit_rate(dev->spi, tx_cfg->bit_rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_modulation(dev->spi, tx_cfg->modulation);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_deviation(dev->spi, tx_cfg->dev_frequency);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_pa_ramp(dev->spi, tx_cfg->pa_ramp);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_modulation_shaping(dev->spi, tx_cfg->mod_shaping);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_tx_start_condition(dev->spi, tx_cfg->tx_start_condition);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* packet format enable */
|
|
if (tx_cfg->enable_preamble == OPTION_ON) {
|
|
ret = rf69_set_preamble_length(dev->spi,
|
|
tx_cfg->preamble_length);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = rf69_set_preamble_length(dev->spi, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (tx_cfg->enable_sync == OPTION_ON) {
|
|
ret = rf69_set_sync_size(dev->spi, tx_cfg->sync_length);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_set_sync_values(dev->spi, tx_cfg->sync_pattern);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = rf69_enable_sync(dev->spi);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = rf69_disable_sync(dev->spi);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (tx_cfg->enable_length_byte == OPTION_ON) {
|
|
ret = rf69_set_packet_format(dev->spi, packet_length_var);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = rf69_set_packet_format(dev->spi, packet_length_fix);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (tx_cfg->enable_crc == OPTION_ON) {
|
|
ret = rf69_enable_crc(dev->spi);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
ret = rf69_disable_crc(dev->spi);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int
|
|
pi433_start_rx(struct pi433_device *dev)
|
|
{
|
|
int retval;
|
|
|
|
/* return without action, if no pending read request */
|
|
if (!dev->rx_active)
|
|
return 0;
|
|
|
|
/* setup for receiving */
|
|
retval = rf69_set_rx_cfg(dev, &dev->rx_cfg);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/* setup rssi irq */
|
|
retval = rf69_set_dio_mapping(dev->spi, DIO0, DIO_RSSI_DIO0);
|
|
if (retval < 0)
|
|
return retval;
|
|
dev->irq_state[DIO0] = DIO_RSSI_DIO0;
|
|
irq_set_irq_type(dev->irq_num[DIO0], IRQ_TYPE_EDGE_RISING);
|
|
|
|
/* setup fifo level interrupt */
|
|
retval = rf69_set_fifo_threshold(dev->spi, FIFO_SIZE - FIFO_THRESHOLD);
|
|
if (retval < 0)
|
|
return retval;
|
|
retval = rf69_set_dio_mapping(dev->spi, DIO1, DIO_FIFO_LEVEL);
|
|
if (retval < 0)
|
|
return retval;
|
|
dev->irq_state[DIO1] = DIO_FIFO_LEVEL;
|
|
irq_set_irq_type(dev->irq_num[DIO1], IRQ_TYPE_EDGE_RISING);
|
|
|
|
/* set module to receiving mode */
|
|
retval = rf69_set_mode(dev->spi, receive);
|
|
if (retval < 0)
|
|
return retval;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int
|
|
pi433_receive(void *data)
|
|
{
|
|
struct pi433_device *dev = data;
|
|
struct spi_device *spi = dev->spi;
|
|
int bytes_to_read, bytes_total;
|
|
int retval;
|
|
|
|
dev->interrupt_rx_allowed = false;
|
|
|
|
/* wait for any tx to finish */
|
|
dev_dbg(dev->dev, "rx: going to wait for any tx to finish");
|
|
retval = wait_event_interruptible(dev->rx_wait_queue, !dev->tx_active);
|
|
if (retval) {
|
|
/* wait was interrupted */
|
|
dev->interrupt_rx_allowed = true;
|
|
wake_up_interruptible(&dev->tx_wait_queue);
|
|
return retval;
|
|
}
|
|
|
|
/* prepare status vars */
|
|
dev->free_in_fifo = FIFO_SIZE;
|
|
dev->rx_position = 0;
|
|
dev->rx_bytes_dropped = 0;
|
|
|
|
/* setup radio module to listen for something "in the air" */
|
|
retval = pi433_start_rx(dev);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/* now check RSSI, if low wait for getting high (RSSI interrupt) */
|
|
while (!rf69_get_flag(dev->spi, rssi_exceeded_threshold)) {
|
|
/* allow tx to interrupt us while waiting for high RSSI */
|
|
dev->interrupt_rx_allowed = true;
|
|
wake_up_interruptible(&dev->tx_wait_queue);
|
|
|
|
/* wait for RSSI level to become high */
|
|
dev_dbg(dev->dev, "rx: going to wait for high RSSI level");
|
|
retval = wait_event_interruptible(dev->rx_wait_queue,
|
|
rf69_get_flag(dev->spi,
|
|
rssi_exceeded_threshold));
|
|
if (retval) /* wait was interrupted */
|
|
goto abort;
|
|
dev->interrupt_rx_allowed = false;
|
|
|
|
/* cross check for ongoing tx */
|
|
if (!dev->tx_active)
|
|
break;
|
|
}
|
|
|
|
/* configure payload ready irq */
|
|
retval = rf69_set_dio_mapping(spi, DIO0, DIO_PAYLOAD_READY);
|
|
if (retval < 0)
|
|
goto abort;
|
|
dev->irq_state[DIO0] = DIO_PAYLOAD_READY;
|
|
irq_set_irq_type(dev->irq_num[DIO0], IRQ_TYPE_EDGE_RISING);
|
|
|
|
/* fixed or unlimited length? */
|
|
if (dev->rx_cfg.fixed_message_length != 0) {
|
|
if (dev->rx_cfg.fixed_message_length > dev->rx_buffer_size) {
|
|
retval = -1;
|
|
goto abort;
|
|
}
|
|
bytes_total = dev->rx_cfg.fixed_message_length;
|
|
dev_dbg(dev->dev, "rx: msg len set to %d by fixed length",
|
|
bytes_total);
|
|
} else {
|
|
bytes_total = dev->rx_buffer_size;
|
|
dev_dbg(dev->dev, "rx: msg len set to %d as requested by read",
|
|
bytes_total);
|
|
}
|
|
|
|
/* length byte enabled? */
|
|
if (dev->rx_cfg.enable_length_byte == OPTION_ON) {
|
|
retval = wait_event_interruptible(dev->fifo_wait_queue,
|
|
dev->free_in_fifo < FIFO_SIZE);
|
|
if (retval) /* wait was interrupted */
|
|
goto abort;
|
|
|
|
rf69_read_fifo(spi, (u8 *)&bytes_total, 1);
|
|
if (bytes_total > dev->rx_buffer_size) {
|
|
retval = -1;
|
|
goto abort;
|
|
}
|
|
dev->free_in_fifo++;
|
|
dev_dbg(dev->dev, "rx: msg len reset to %d due to length byte",
|
|
bytes_total);
|
|
}
|
|
|
|
/* address byte enabled? */
|
|
if (dev->rx_cfg.enable_address_filtering != filtering_off) {
|
|
u8 dummy;
|
|
|
|
bytes_total--;
|
|
|
|
retval = wait_event_interruptible(dev->fifo_wait_queue,
|
|
dev->free_in_fifo < FIFO_SIZE);
|
|
if (retval) /* wait was interrupted */
|
|
goto abort;
|
|
|
|
rf69_read_fifo(spi, &dummy, 1);
|
|
dev->free_in_fifo++;
|
|
dev_dbg(dev->dev, "rx: address byte stripped off");
|
|
}
|
|
|
|
/* get payload */
|
|
while (dev->rx_position < bytes_total) {
|
|
if (!rf69_get_flag(dev->spi, payload_ready)) {
|
|
retval = wait_event_interruptible(dev->fifo_wait_queue,
|
|
dev->free_in_fifo < FIFO_SIZE);
|
|
if (retval) /* wait was interrupted */
|
|
goto abort;
|
|
}
|
|
|
|
/* need to drop bytes or acquire? */
|
|
if (dev->rx_bytes_to_drop > dev->rx_bytes_dropped)
|
|
bytes_to_read = dev->rx_bytes_to_drop -
|
|
dev->rx_bytes_dropped;
|
|
else
|
|
bytes_to_read = bytes_total - dev->rx_position;
|
|
|
|
/* access the fifo */
|
|
if (bytes_to_read > FIFO_SIZE - dev->free_in_fifo)
|
|
bytes_to_read = FIFO_SIZE - dev->free_in_fifo;
|
|
retval = rf69_read_fifo(spi,
|
|
&dev->rx_buffer[dev->rx_position],
|
|
bytes_to_read);
|
|
if (retval) /* read failed */
|
|
goto abort;
|
|
|
|
dev->free_in_fifo += bytes_to_read;
|
|
|
|
/* adjust status vars */
|
|
if (dev->rx_bytes_to_drop > dev->rx_bytes_dropped)
|
|
dev->rx_bytes_dropped += bytes_to_read;
|
|
else
|
|
dev->rx_position += bytes_to_read;
|
|
}
|
|
|
|
/* rx done, wait was interrupted or error occurred */
|
|
abort:
|
|
dev->interrupt_rx_allowed = true;
|
|
if (rf69_set_mode(dev->spi, standby))
|
|
pr_err("rf69_set_mode(): radio module failed to go standby\n");
|
|
wake_up_interruptible(&dev->tx_wait_queue);
|
|
|
|
if (retval)
|
|
return retval;
|
|
else
|
|
return bytes_total;
|
|
}
|
|
|
|
static int
|
|
pi433_tx_thread(void *data)
|
|
{
|
|
struct pi433_device *device = data;
|
|
struct spi_device *spi = device->spi;
|
|
struct pi433_tx_cfg tx_cfg;
|
|
size_t size;
|
|
bool rx_interrupted = false;
|
|
int position, repetitions;
|
|
int retval;
|
|
|
|
while (1) {
|
|
/* wait for fifo to be populated or for request to terminate*/
|
|
dev_dbg(device->dev, "thread: going to wait for new messages");
|
|
wait_event_interruptible(device->tx_wait_queue,
|
|
(!kfifo_is_empty(&device->tx_fifo) ||
|
|
kthread_should_stop()));
|
|
if (kthread_should_stop())
|
|
return 0;
|
|
|
|
/*
|
|
* get data from fifo in the following order:
|
|
* - tx_cfg
|
|
* - size of message
|
|
* - message
|
|
*/
|
|
retval = kfifo_out(&device->tx_fifo, &tx_cfg, sizeof(tx_cfg));
|
|
if (retval != sizeof(tx_cfg)) {
|
|
dev_dbg(device->dev,
|
|
"reading tx_cfg from fifo failed: got %d byte(s), expected %d",
|
|
retval, (unsigned int)sizeof(tx_cfg));
|
|
continue;
|
|
}
|
|
|
|
retval = kfifo_out(&device->tx_fifo, &size, sizeof(size_t));
|
|
if (retval != sizeof(size_t)) {
|
|
dev_dbg(device->dev,
|
|
"reading msg size from fifo failed: got %d, expected %d",
|
|
retval, (unsigned int)sizeof(size_t));
|
|
continue;
|
|
}
|
|
|
|
/* use fixed message length, if requested */
|
|
if (tx_cfg.fixed_message_length != 0)
|
|
size = tx_cfg.fixed_message_length;
|
|
|
|
/* increase size, if len byte is requested */
|
|
if (tx_cfg.enable_length_byte == OPTION_ON)
|
|
size++;
|
|
|
|
/* increase size, if adr byte is requested */
|
|
if (tx_cfg.enable_address_byte == OPTION_ON)
|
|
size++;
|
|
|
|
/* prime buffer */
|
|
memset(device->buffer, 0, size);
|
|
position = 0;
|
|
|
|
/* add length byte, if requested */
|
|
if (tx_cfg.enable_length_byte == OPTION_ON)
|
|
/*
|
|
* according to spec, length byte itself must be
|
|
* excluded from the length calculation
|
|
*/
|
|
device->buffer[position++] = size - 1;
|
|
|
|
/* add adr byte, if requested */
|
|
if (tx_cfg.enable_address_byte == OPTION_ON)
|
|
device->buffer[position++] = tx_cfg.address_byte;
|
|
|
|
/* finally get message data from fifo */
|
|
retval = kfifo_out(&device->tx_fifo, &device->buffer[position],
|
|
sizeof(device->buffer) - position);
|
|
dev_dbg(device->dev,
|
|
"read %d message byte(s) from fifo queue.", retval);
|
|
|
|
/*
|
|
* if rx is active, we need to interrupt the waiting for
|
|
* incoming telegrams, to be able to send something.
|
|
* We are only allowed, if currently no reception takes
|
|
* place otherwise we need to wait for the incoming telegram
|
|
* to finish
|
|
*/
|
|
wait_event_interruptible(device->tx_wait_queue,
|
|
!device->rx_active ||
|
|
device->interrupt_rx_allowed);
|
|
|
|
/*
|
|
* prevent race conditions
|
|
* irq will be reenabled after tx config is set
|
|
*/
|
|
disable_irq(device->irq_num[DIO0]);
|
|
device->tx_active = true;
|
|
|
|
/* clear fifo, set fifo threshold, set payload length */
|
|
retval = rf69_set_mode(spi, standby); /* this clears the fifo */
|
|
if (retval < 0)
|
|
goto abort;
|
|
|
|
if (device->rx_active && !rx_interrupted) {
|
|
/*
|
|
* rx is currently waiting for a telegram;
|
|
* we need to set the radio module to standby
|
|
*/
|
|
rx_interrupted = true;
|
|
}
|
|
|
|
retval = rf69_set_fifo_threshold(spi, FIFO_THRESHOLD);
|
|
if (retval < 0)
|
|
goto abort;
|
|
if (tx_cfg.enable_length_byte == OPTION_ON) {
|
|
retval = rf69_set_payload_length(spi, size * tx_cfg.repetitions);
|
|
if (retval < 0)
|
|
goto abort;
|
|
} else {
|
|
retval = rf69_set_payload_length(spi, 0);
|
|
if (retval < 0)
|
|
goto abort;
|
|
}
|
|
|
|
/* configure the rf chip */
|
|
retval = rf69_set_tx_cfg(device, &tx_cfg);
|
|
if (retval < 0)
|
|
goto abort;
|
|
|
|
/* enable fifo level interrupt */
|
|
retval = rf69_set_dio_mapping(spi, DIO1, DIO_FIFO_LEVEL);
|
|
if (retval < 0)
|
|
goto abort;
|
|
device->irq_state[DIO1] = DIO_FIFO_LEVEL;
|
|
irq_set_irq_type(device->irq_num[DIO1], IRQ_TYPE_EDGE_FALLING);
|
|
|
|
/* enable packet sent interrupt */
|
|
retval = rf69_set_dio_mapping(spi, DIO0, DIO_PACKET_SENT);
|
|
if (retval < 0)
|
|
goto abort;
|
|
device->irq_state[DIO0] = DIO_PACKET_SENT;
|
|
irq_set_irq_type(device->irq_num[DIO0], IRQ_TYPE_EDGE_RISING);
|
|
enable_irq(device->irq_num[DIO0]); /* was disabled by rx active check */
|
|
|
|
/* enable transmission */
|
|
retval = rf69_set_mode(spi, transmit);
|
|
if (retval < 0)
|
|
goto abort;
|
|
|
|
/* transfer this msg (and repetitions) to chip fifo */
|
|
device->free_in_fifo = FIFO_SIZE;
|
|
position = 0;
|
|
repetitions = tx_cfg.repetitions;
|
|
while ((repetitions > 0) && (size > position)) {
|
|
if ((size - position) > device->free_in_fifo) {
|
|
/* msg to big for fifo - take a part */
|
|
int write_size = device->free_in_fifo;
|
|
|
|
device->free_in_fifo = 0;
|
|
rf69_write_fifo(spi,
|
|
&device->buffer[position],
|
|
write_size);
|
|
position += write_size;
|
|
} else {
|
|
/* msg fits into fifo - take all */
|
|
device->free_in_fifo -= size;
|
|
repetitions--;
|
|
rf69_write_fifo(spi,
|
|
&device->buffer[position],
|
|
(size - position));
|
|
position = 0; /* reset for next repetition */
|
|
}
|
|
|
|
retval = wait_event_interruptible(device->fifo_wait_queue,
|
|
device->free_in_fifo > 0);
|
|
if (retval) {
|
|
dev_dbg(device->dev, "ABORT\n");
|
|
goto abort;
|
|
}
|
|
}
|
|
|
|
/* we are done. Wait for packet to get sent */
|
|
dev_dbg(device->dev,
|
|
"thread: wait for packet to get sent/fifo to be empty");
|
|
wait_event_interruptible(device->fifo_wait_queue,
|
|
device->free_in_fifo == FIFO_SIZE ||
|
|
kthread_should_stop());
|
|
if (kthread_should_stop())
|
|
return 0;
|
|
|
|
/* STOP_TRANSMISSION */
|
|
dev_dbg(device->dev, "thread: Packet sent. Set mode to stby.");
|
|
retval = rf69_set_mode(spi, standby);
|
|
if (retval < 0)
|
|
goto abort;
|
|
|
|
/* everything sent? */
|
|
if (kfifo_is_empty(&device->tx_fifo)) {
|
|
abort:
|
|
if (rx_interrupted) {
|
|
rx_interrupted = false;
|
|
pi433_start_rx(device);
|
|
}
|
|
device->tx_active = false;
|
|
wake_up_interruptible(&device->rx_wait_queue);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static ssize_t
|
|
pi433_read(struct file *filp, char __user *buf, size_t size, loff_t *f_pos)
|
|
{
|
|
struct pi433_instance *instance;
|
|
struct pi433_device *device;
|
|
int bytes_received;
|
|
ssize_t retval;
|
|
|
|
/* check, whether internal buffer is big enough for requested size */
|
|
if (size > MAX_MSG_SIZE)
|
|
return -EMSGSIZE;
|
|
|
|
instance = filp->private_data;
|
|
device = instance->device;
|
|
|
|
/* just one read request at a time */
|
|
mutex_lock(&device->rx_lock);
|
|
if (device->rx_active) {
|
|
mutex_unlock(&device->rx_lock);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
device->rx_active = true;
|
|
mutex_unlock(&device->rx_lock);
|
|
|
|
/* start receiving */
|
|
/* will block until something was received*/
|
|
device->rx_buffer_size = size;
|
|
bytes_received = pi433_receive(device);
|
|
|
|
/* release rx */
|
|
mutex_lock(&device->rx_lock);
|
|
device->rx_active = false;
|
|
mutex_unlock(&device->rx_lock);
|
|
|
|
/* if read was successful copy to user space*/
|
|
if (bytes_received > 0) {
|
|
retval = copy_to_user(buf, device->rx_buffer, bytes_received);
|
|
if (retval)
|
|
return -EFAULT;
|
|
}
|
|
|
|
return bytes_received;
|
|
}
|
|
|
|
static ssize_t
|
|
pi433_write(struct file *filp, const char __user *buf,
|
|
size_t count, loff_t *f_pos)
|
|
{
|
|
struct pi433_instance *instance;
|
|
struct pi433_device *device;
|
|
int retval;
|
|
unsigned int required, available, copied;
|
|
|
|
instance = filp->private_data;
|
|
device = instance->device;
|
|
|
|
/*
|
|
* check, whether internal buffer (tx thread) is big enough
|
|
* for requested size
|
|
*/
|
|
if (count > MAX_MSG_SIZE)
|
|
return -EMSGSIZE;
|
|
|
|
/*
|
|
* write the following sequence into fifo:
|
|
* - tx_cfg
|
|
* - size of message
|
|
* - message
|
|
*/
|
|
mutex_lock(&device->tx_fifo_lock);
|
|
|
|
required = sizeof(instance->tx_cfg) + sizeof(size_t) + count;
|
|
available = kfifo_avail(&device->tx_fifo);
|
|
if (required > available) {
|
|
dev_dbg(device->dev, "write to fifo failed: %d bytes required but %d available",
|
|
required, available);
|
|
mutex_unlock(&device->tx_fifo_lock);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
retval = kfifo_in(&device->tx_fifo, &instance->tx_cfg,
|
|
sizeof(instance->tx_cfg));
|
|
if (retval != sizeof(instance->tx_cfg))
|
|
goto abort;
|
|
|
|
retval = kfifo_in(&device->tx_fifo, &count, sizeof(size_t));
|
|
if (retval != sizeof(size_t))
|
|
goto abort;
|
|
|
|
retval = kfifo_from_user(&device->tx_fifo, buf, count, &copied);
|
|
if (retval || copied != count)
|
|
goto abort;
|
|
|
|
mutex_unlock(&device->tx_fifo_lock);
|
|
|
|
/* start transfer */
|
|
wake_up_interruptible(&device->tx_wait_queue);
|
|
dev_dbg(device->dev, "write: generated new msg with %d bytes.", copied);
|
|
|
|
return copied;
|
|
|
|
abort:
|
|
dev_warn(device->dev,
|
|
"write to fifo failed, non recoverable: 0x%x", retval);
|
|
mutex_unlock(&device->tx_fifo_lock);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static long
|
|
pi433_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct pi433_instance *instance;
|
|
struct pi433_device *device;
|
|
struct pi433_tx_cfg tx_cfg;
|
|
void __user *argp = (void __user *)arg;
|
|
|
|
/* Check type and command number */
|
|
if (_IOC_TYPE(cmd) != PI433_IOC_MAGIC)
|
|
return -ENOTTY;
|
|
|
|
instance = filp->private_data;
|
|
device = instance->device;
|
|
|
|
if (!device)
|
|
return -ESHUTDOWN;
|
|
|
|
switch (cmd) {
|
|
case PI433_IOC_RD_TX_CFG:
|
|
if (copy_to_user(argp, &instance->tx_cfg,
|
|
sizeof(struct pi433_tx_cfg)))
|
|
return -EFAULT;
|
|
break;
|
|
case PI433_IOC_WR_TX_CFG:
|
|
if (copy_from_user(&tx_cfg, argp, sizeof(struct pi433_tx_cfg)))
|
|
return -EFAULT;
|
|
mutex_lock(&device->tx_fifo_lock);
|
|
memcpy(&instance->tx_cfg, &tx_cfg, sizeof(struct pi433_tx_cfg));
|
|
mutex_unlock(&device->tx_fifo_lock);
|
|
break;
|
|
case PI433_IOC_RD_RX_CFG:
|
|
if (copy_to_user(argp, &device->rx_cfg,
|
|
sizeof(struct pi433_rx_cfg)))
|
|
return -EFAULT;
|
|
break;
|
|
case PI433_IOC_WR_RX_CFG:
|
|
mutex_lock(&device->rx_lock);
|
|
|
|
/* during pendig read request, change of config not allowed */
|
|
if (device->rx_active) {
|
|
mutex_unlock(&device->rx_lock);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (copy_from_user(&device->rx_cfg, argp,
|
|
sizeof(struct pi433_rx_cfg))) {
|
|
mutex_unlock(&device->rx_lock);
|
|
return -EFAULT;
|
|
}
|
|
|
|
mutex_unlock(&device->rx_lock);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int pi433_open(struct inode *inode, struct file *filp)
|
|
{
|
|
struct pi433_device *device;
|
|
struct pi433_instance *instance;
|
|
|
|
mutex_lock(&minor_lock);
|
|
device = idr_find(&pi433_idr, iminor(inode));
|
|
mutex_unlock(&minor_lock);
|
|
if (!device) {
|
|
pr_debug("device: minor %d unknown.\n", iminor(inode));
|
|
return -ENODEV;
|
|
}
|
|
|
|
instance = kzalloc(sizeof(*instance), GFP_KERNEL);
|
|
if (!instance)
|
|
return -ENOMEM;
|
|
|
|
/* setup instance data*/
|
|
instance->device = device;
|
|
instance->tx_cfg.bit_rate = 4711;
|
|
// TODO: fill instance->tx_cfg;
|
|
|
|
/* instance data as context */
|
|
filp->private_data = instance;
|
|
stream_open(inode, filp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pi433_release(struct inode *inode, struct file *filp)
|
|
{
|
|
struct pi433_instance *instance;
|
|
|
|
instance = filp->private_data;
|
|
kfree(instance);
|
|
filp->private_data = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int setup_gpio(struct pi433_device *device)
|
|
{
|
|
char name[5];
|
|
int retval;
|
|
int i;
|
|
const irq_handler_t DIO_irq_handler[NUM_DIO] = {
|
|
DIO0_irq_handler,
|
|
DIO1_irq_handler
|
|
};
|
|
|
|
for (i = 0; i < NUM_DIO; i++) {
|
|
/* "construct" name and get the gpio descriptor */
|
|
snprintf(name, sizeof(name), "DIO%d", i);
|
|
device->gpiod[i] = gpiod_get(&device->spi->dev, name,
|
|
0 /*GPIOD_IN*/);
|
|
|
|
if (device->gpiod[i] == ERR_PTR(-ENOENT)) {
|
|
dev_dbg(&device->spi->dev,
|
|
"Could not find entry for %s. Ignoring.", name);
|
|
continue;
|
|
}
|
|
|
|
if (device->gpiod[i] == ERR_PTR(-EBUSY))
|
|
dev_dbg(&device->spi->dev, "%s is busy.", name);
|
|
|
|
if (IS_ERR(device->gpiod[i])) {
|
|
retval = PTR_ERR(device->gpiod[i]);
|
|
/* release already allocated gpios */
|
|
for (i--; i >= 0; i--) {
|
|
free_irq(device->irq_num[i], device);
|
|
gpiod_put(device->gpiod[i]);
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/* configure the pin */
|
|
gpiod_unexport(device->gpiod[i]);
|
|
retval = gpiod_direction_input(device->gpiod[i]);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/* configure irq */
|
|
device->irq_num[i] = gpiod_to_irq(device->gpiod[i]);
|
|
if (device->irq_num[i] < 0) {
|
|
device->gpiod[i] = ERR_PTR(-EINVAL);
|
|
return device->irq_num[i];
|
|
}
|
|
retval = request_irq(device->irq_num[i],
|
|
DIO_irq_handler[i],
|
|
0, /* flags */
|
|
name,
|
|
device);
|
|
|
|
if (retval)
|
|
return retval;
|
|
|
|
dev_dbg(&device->spi->dev, "%s successfully configured", name);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void free_gpio(struct pi433_device *device)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < NUM_DIO; i++) {
|
|
/* check if gpiod is valid */
|
|
if (IS_ERR(device->gpiod[i]))
|
|
continue;
|
|
|
|
free_irq(device->irq_num[i], device);
|
|
gpiod_put(device->gpiod[i]);
|
|
}
|
|
}
|
|
|
|
static int pi433_get_minor(struct pi433_device *device)
|
|
{
|
|
int retval = -ENOMEM;
|
|
|
|
mutex_lock(&minor_lock);
|
|
retval = idr_alloc(&pi433_idr, device, 0, N_PI433_MINORS, GFP_KERNEL);
|
|
if (retval >= 0) {
|
|
device->minor = retval;
|
|
retval = 0;
|
|
} else if (retval == -ENOSPC) {
|
|
dev_err(&device->spi->dev, "too many pi433 devices\n");
|
|
retval = -EINVAL;
|
|
}
|
|
mutex_unlock(&minor_lock);
|
|
return retval;
|
|
}
|
|
|
|
static void pi433_free_minor(struct pi433_device *dev)
|
|
{
|
|
mutex_lock(&minor_lock);
|
|
idr_remove(&pi433_idr, dev->minor);
|
|
mutex_unlock(&minor_lock);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static const struct file_operations pi433_fops = {
|
|
.owner = THIS_MODULE,
|
|
/*
|
|
* REVISIT switch to aio primitives, so that userspace
|
|
* gets more complete API coverage. It'll simplify things
|
|
* too, except for the locking.
|
|
*/
|
|
.write = pi433_write,
|
|
.read = pi433_read,
|
|
.unlocked_ioctl = pi433_ioctl,
|
|
.compat_ioctl = compat_ptr_ioctl,
|
|
.open = pi433_open,
|
|
.release = pi433_release,
|
|
.llseek = no_llseek,
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int pi433_probe(struct spi_device *spi)
|
|
{
|
|
struct pi433_device *device;
|
|
int retval;
|
|
|
|
/* setup spi parameters */
|
|
spi->mode = 0x00;
|
|
spi->bits_per_word = 8;
|
|
/*
|
|
* spi->max_speed_hz = 10000000;
|
|
* 1MHz already set by device tree overlay
|
|
*/
|
|
|
|
retval = spi_setup(spi);
|
|
if (retval) {
|
|
dev_dbg(&spi->dev, "configuration of SPI interface failed!\n");
|
|
return retval;
|
|
}
|
|
|
|
dev_dbg(&spi->dev,
|
|
"spi interface setup: mode 0x%2x, %d bits per word, %dhz max speed",
|
|
spi->mode, spi->bits_per_word, spi->max_speed_hz);
|
|
|
|
/* Ping the chip by reading the version register */
|
|
retval = spi_w8r8(spi, 0x10);
|
|
if (retval < 0)
|
|
return retval;
|
|
|
|
switch (retval) {
|
|
case 0x24:
|
|
dev_dbg(&spi->dev, "found pi433 (ver. 0x%x)", retval);
|
|
break;
|
|
default:
|
|
dev_dbg(&spi->dev, "unknown chip version: 0x%x", retval);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Allocate driver data */
|
|
device = kzalloc(sizeof(*device), GFP_KERNEL);
|
|
if (!device)
|
|
return -ENOMEM;
|
|
|
|
/* Initialize the driver data */
|
|
device->spi = spi;
|
|
device->rx_active = false;
|
|
device->tx_active = false;
|
|
device->interrupt_rx_allowed = false;
|
|
|
|
/* init rx buffer */
|
|
device->rx_buffer = kmalloc(MAX_MSG_SIZE, GFP_KERNEL);
|
|
if (!device->rx_buffer) {
|
|
retval = -ENOMEM;
|
|
goto RX_failed;
|
|
}
|
|
|
|
/* init wait queues */
|
|
init_waitqueue_head(&device->tx_wait_queue);
|
|
init_waitqueue_head(&device->rx_wait_queue);
|
|
init_waitqueue_head(&device->fifo_wait_queue);
|
|
|
|
/* init fifo */
|
|
INIT_KFIFO(device->tx_fifo);
|
|
|
|
/* init mutexes and locks */
|
|
mutex_init(&device->tx_fifo_lock);
|
|
mutex_init(&device->rx_lock);
|
|
|
|
/* setup GPIO (including irq_handler) for the different DIOs */
|
|
retval = setup_gpio(device);
|
|
if (retval) {
|
|
dev_dbg(&spi->dev, "setup of GPIOs failed");
|
|
goto GPIO_failed;
|
|
}
|
|
|
|
/* setup the radio module */
|
|
retval = rf69_set_mode(spi, standby);
|
|
if (retval < 0)
|
|
goto minor_failed;
|
|
retval = rf69_set_data_mode(spi, DATAMODUL_MODE_PACKET);
|
|
if (retval < 0)
|
|
goto minor_failed;
|
|
retval = rf69_enable_amplifier(spi, MASK_PALEVEL_PA0);
|
|
if (retval < 0)
|
|
goto minor_failed;
|
|
retval = rf69_disable_amplifier(spi, MASK_PALEVEL_PA1);
|
|
if (retval < 0)
|
|
goto minor_failed;
|
|
retval = rf69_disable_amplifier(spi, MASK_PALEVEL_PA2);
|
|
if (retval < 0)
|
|
goto minor_failed;
|
|
retval = rf69_set_output_power_level(spi, 13);
|
|
if (retval < 0)
|
|
goto minor_failed;
|
|
retval = rf69_set_antenna_impedance(spi, fifty_ohm);
|
|
if (retval < 0)
|
|
goto minor_failed;
|
|
|
|
/* determ minor number */
|
|
retval = pi433_get_minor(device);
|
|
if (retval) {
|
|
dev_dbg(&spi->dev, "get of minor number failed");
|
|
goto minor_failed;
|
|
}
|
|
|
|
/* create device */
|
|
device->devt = MKDEV(MAJOR(pi433_dev), device->minor);
|
|
device->dev = device_create(pi433_class,
|
|
&spi->dev,
|
|
device->devt,
|
|
device,
|
|
"pi433.%d",
|
|
device->minor);
|
|
if (IS_ERR(device->dev)) {
|
|
pr_err("pi433: device register failed\n");
|
|
retval = PTR_ERR(device->dev);
|
|
goto device_create_failed;
|
|
} else {
|
|
dev_dbg(device->dev,
|
|
"created device for major %d, minor %d\n",
|
|
MAJOR(pi433_dev),
|
|
device->minor);
|
|
}
|
|
|
|
/* start tx thread */
|
|
device->tx_task_struct = kthread_run(pi433_tx_thread,
|
|
device,
|
|
"pi433.%d_tx_task",
|
|
device->minor);
|
|
if (IS_ERR(device->tx_task_struct)) {
|
|
dev_dbg(device->dev, "start of send thread failed");
|
|
retval = PTR_ERR(device->tx_task_struct);
|
|
goto send_thread_failed;
|
|
}
|
|
|
|
/* create cdev */
|
|
device->cdev = cdev_alloc();
|
|
if (!device->cdev) {
|
|
dev_dbg(device->dev, "allocation of cdev failed");
|
|
retval = -ENOMEM;
|
|
goto cdev_failed;
|
|
}
|
|
device->cdev->owner = THIS_MODULE;
|
|
cdev_init(device->cdev, &pi433_fops);
|
|
retval = cdev_add(device->cdev, device->devt, 1);
|
|
if (retval) {
|
|
dev_dbg(device->dev, "register of cdev failed");
|
|
goto del_cdev;
|
|
}
|
|
|
|
/* spi setup */
|
|
spi_set_drvdata(spi, device);
|
|
|
|
return 0;
|
|
|
|
del_cdev:
|
|
cdev_del(device->cdev);
|
|
cdev_failed:
|
|
kthread_stop(device->tx_task_struct);
|
|
send_thread_failed:
|
|
device_destroy(pi433_class, device->devt);
|
|
device_create_failed:
|
|
pi433_free_minor(device);
|
|
minor_failed:
|
|
free_gpio(device);
|
|
GPIO_failed:
|
|
kfree(device->rx_buffer);
|
|
RX_failed:
|
|
kfree(device);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int pi433_remove(struct spi_device *spi)
|
|
{
|
|
struct pi433_device *device = spi_get_drvdata(spi);
|
|
|
|
/* free GPIOs */
|
|
free_gpio(device);
|
|
|
|
/* make sure ops on existing fds can abort cleanly */
|
|
device->spi = NULL;
|
|
|
|
kthread_stop(device->tx_task_struct);
|
|
|
|
device_destroy(pi433_class, device->devt);
|
|
|
|
cdev_del(device->cdev);
|
|
|
|
pi433_free_minor(device);
|
|
|
|
kfree(device->rx_buffer);
|
|
kfree(device);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id pi433_dt_ids[] = {
|
|
{ .compatible = "Smarthome-Wolf,pi433" },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, pi433_dt_ids);
|
|
|
|
static struct spi_driver pi433_spi_driver = {
|
|
.driver = {
|
|
.name = "pi433",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(pi433_dt_ids),
|
|
},
|
|
.probe = pi433_probe,
|
|
.remove = pi433_remove,
|
|
|
|
/*
|
|
* NOTE: suspend/resume methods are not necessary here.
|
|
* We don't do anything except pass the requests to/from
|
|
* the underlying controller. The refrigerator handles
|
|
* most issues; the controller driver handles the rest.
|
|
*/
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int __init pi433_init(void)
|
|
{
|
|
int status;
|
|
|
|
/*
|
|
* If MAX_MSG_SIZE is smaller then FIFO_SIZE, the driver won't
|
|
* work stable - risk of buffer overflow
|
|
*/
|
|
if (MAX_MSG_SIZE < FIFO_SIZE)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Claim device numbers. Then register a class
|
|
* that will key udev/mdev to add/remove /dev nodes. Last, register
|
|
* Last, register the driver which manages those device numbers.
|
|
*/
|
|
status = alloc_chrdev_region(&pi433_dev, 0, N_PI433_MINORS, "pi433");
|
|
if (status < 0)
|
|
return status;
|
|
|
|
pi433_class = class_create(THIS_MODULE, "pi433");
|
|
if (IS_ERR(pi433_class)) {
|
|
unregister_chrdev(MAJOR(pi433_dev),
|
|
pi433_spi_driver.driver.name);
|
|
return PTR_ERR(pi433_class);
|
|
}
|
|
|
|
status = spi_register_driver(&pi433_spi_driver);
|
|
if (status < 0) {
|
|
class_destroy(pi433_class);
|
|
unregister_chrdev(MAJOR(pi433_dev),
|
|
pi433_spi_driver.driver.name);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
module_init(pi433_init);
|
|
|
|
static void __exit pi433_exit(void)
|
|
{
|
|
spi_unregister_driver(&pi433_spi_driver);
|
|
class_destroy(pi433_class);
|
|
unregister_chrdev(MAJOR(pi433_dev), pi433_spi_driver.driver.name);
|
|
}
|
|
module_exit(pi433_exit);
|
|
|
|
MODULE_AUTHOR("Marcus Wolf, <linux@wolf-entwicklungen.de>");
|
|
MODULE_DESCRIPTION("Driver for Pi433");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("spi:pi433");
|