mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 08:58:07 +00:00
5ae233fba8
Add support for compatible sama7g5-wdt. The sama7g5 wdt is the same hardware block as on sam9x60. Adapt the driver to use the sam9x60/sama7g5 variant if either of the two compatibles are selected (sam9x60-wdt/sama7g5-wdt). Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210527100120.266796-2-eugen.hristev@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
388 lines
9.1 KiB
C
388 lines
9.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for Atmel SAMA5D4 Watchdog Timer
|
|
*
|
|
* Copyright (C) 2015-2019 Microchip Technology Inc. and its subsidiaries
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#include "at91sam9_wdt.h"
|
|
|
|
/* minimum and maximum watchdog timeout, in seconds */
|
|
#define MIN_WDT_TIMEOUT 1
|
|
#define MAX_WDT_TIMEOUT 16
|
|
#define WDT_DEFAULT_TIMEOUT MAX_WDT_TIMEOUT
|
|
|
|
#define WDT_SEC2TICKS(s) ((s) ? (((s) << 8) - 1) : 0)
|
|
|
|
struct sama5d4_wdt {
|
|
struct watchdog_device wdd;
|
|
void __iomem *reg_base;
|
|
u32 mr;
|
|
u32 ir;
|
|
unsigned long last_ping;
|
|
bool need_irq;
|
|
bool sam9x60_support;
|
|
};
|
|
|
|
static int wdt_timeout;
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
|
|
module_param(wdt_timeout, int, 0);
|
|
MODULE_PARM_DESC(wdt_timeout,
|
|
"Watchdog timeout in seconds. (default = "
|
|
__MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")");
|
|
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout,
|
|
"Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
#define wdt_enabled (!(wdt->mr & AT91_WDT_WDDIS))
|
|
|
|
#define wdt_read(wdt, field) \
|
|
readl_relaxed((wdt)->reg_base + (field))
|
|
|
|
/* 4 slow clock periods is 4/32768 = 122.07µs*/
|
|
#define WDT_DELAY usecs_to_jiffies(123)
|
|
|
|
static void wdt_write(struct sama5d4_wdt *wdt, u32 field, u32 val)
|
|
{
|
|
/*
|
|
* WDT_CR and WDT_MR must not be modified within three slow clock
|
|
* periods following a restart of the watchdog performed by a write
|
|
* access in WDT_CR.
|
|
*/
|
|
while (time_before(jiffies, wdt->last_ping + WDT_DELAY))
|
|
usleep_range(30, 125);
|
|
writel_relaxed(val, wdt->reg_base + field);
|
|
wdt->last_ping = jiffies;
|
|
}
|
|
|
|
static void wdt_write_nosleep(struct sama5d4_wdt *wdt, u32 field, u32 val)
|
|
{
|
|
if (time_before(jiffies, wdt->last_ping + WDT_DELAY))
|
|
udelay(123);
|
|
writel_relaxed(val, wdt->reg_base + field);
|
|
wdt->last_ping = jiffies;
|
|
}
|
|
|
|
static int sama5d4_wdt_start(struct watchdog_device *wdd)
|
|
{
|
|
struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
|
|
if (wdt->sam9x60_support) {
|
|
writel_relaxed(wdt->ir, wdt->reg_base + AT91_SAM9X60_IER);
|
|
wdt->mr &= ~AT91_SAM9X60_WDDIS;
|
|
} else {
|
|
wdt->mr &= ~AT91_WDT_WDDIS;
|
|
}
|
|
wdt_write(wdt, AT91_WDT_MR, wdt->mr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sama5d4_wdt_stop(struct watchdog_device *wdd)
|
|
{
|
|
struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
|
|
if (wdt->sam9x60_support) {
|
|
writel_relaxed(wdt->ir, wdt->reg_base + AT91_SAM9X60_IDR);
|
|
wdt->mr |= AT91_SAM9X60_WDDIS;
|
|
} else {
|
|
wdt->mr |= AT91_WDT_WDDIS;
|
|
}
|
|
wdt_write(wdt, AT91_WDT_MR, wdt->mr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sama5d4_wdt_ping(struct watchdog_device *wdd)
|
|
{
|
|
struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
|
|
wdt_write(wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd,
|
|
unsigned int timeout)
|
|
{
|
|
struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
u32 value = WDT_SEC2TICKS(timeout);
|
|
|
|
if (wdt->sam9x60_support) {
|
|
wdt_write(wdt, AT91_SAM9X60_WLR,
|
|
AT91_SAM9X60_SET_COUNTER(value));
|
|
|
|
wdd->timeout = timeout;
|
|
return 0;
|
|
}
|
|
|
|
wdt->mr &= ~AT91_WDT_WDV;
|
|
wdt->mr |= AT91_WDT_SET_WDV(value);
|
|
|
|
/*
|
|
* WDDIS has to be 0 when updating WDD/WDV. The datasheet states: When
|
|
* setting the WDDIS bit, and while it is set, the fields WDV and WDD
|
|
* must not be modified.
|
|
* If the watchdog is enabled, then the timeout can be updated. Else,
|
|
* wait that the user enables it.
|
|
*/
|
|
if (wdt_enabled)
|
|
wdt_write(wdt, AT91_WDT_MR, wdt->mr & ~AT91_WDT_WDDIS);
|
|
|
|
wdd->timeout = timeout;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct watchdog_info sama5d4_wdt_info = {
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
|
|
.identity = "Atmel SAMA5D4 Watchdog",
|
|
};
|
|
|
|
static const struct watchdog_ops sama5d4_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = sama5d4_wdt_start,
|
|
.stop = sama5d4_wdt_stop,
|
|
.ping = sama5d4_wdt_ping,
|
|
.set_timeout = sama5d4_wdt_set_timeout,
|
|
};
|
|
|
|
static irqreturn_t sama5d4_wdt_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct sama5d4_wdt *wdt = platform_get_drvdata(dev_id);
|
|
u32 reg;
|
|
|
|
if (wdt->sam9x60_support)
|
|
reg = wdt_read(wdt, AT91_SAM9X60_ISR);
|
|
else
|
|
reg = wdt_read(wdt, AT91_WDT_SR);
|
|
|
|
if (reg) {
|
|
pr_crit("Atmel Watchdog Software Reset\n");
|
|
emergency_restart();
|
|
pr_crit("Reboot didn't succeed\n");
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt)
|
|
{
|
|
const char *tmp;
|
|
|
|
if (wdt->sam9x60_support)
|
|
wdt->mr = AT91_SAM9X60_WDDIS;
|
|
else
|
|
wdt->mr = AT91_WDT_WDDIS;
|
|
|
|
if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) &&
|
|
!strcmp(tmp, "software"))
|
|
wdt->need_irq = true;
|
|
|
|
if (of_property_read_bool(np, "atmel,idle-halt"))
|
|
wdt->mr |= AT91_WDT_WDIDLEHLT;
|
|
|
|
if (of_property_read_bool(np, "atmel,dbg-halt"))
|
|
wdt->mr |= AT91_WDT_WDDBGHLT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sama5d4_wdt_init(struct sama5d4_wdt *wdt)
|
|
{
|
|
u32 reg, val;
|
|
|
|
val = WDT_SEC2TICKS(WDT_DEFAULT_TIMEOUT);
|
|
/*
|
|
* When booting and resuming, the bootloader may have changed the
|
|
* watchdog configuration.
|
|
* If the watchdog is already running, we can safely update it.
|
|
* Else, we have to disable it properly.
|
|
*/
|
|
if (!wdt_enabled) {
|
|
reg = wdt_read(wdt, AT91_WDT_MR);
|
|
if (wdt->sam9x60_support && (!(reg & AT91_SAM9X60_WDDIS)))
|
|
wdt_write_nosleep(wdt, AT91_WDT_MR,
|
|
reg | AT91_SAM9X60_WDDIS);
|
|
else if (!wdt->sam9x60_support &&
|
|
(!(reg & AT91_WDT_WDDIS)))
|
|
wdt_write_nosleep(wdt, AT91_WDT_MR,
|
|
reg | AT91_WDT_WDDIS);
|
|
}
|
|
|
|
if (wdt->sam9x60_support) {
|
|
if (wdt->need_irq)
|
|
wdt->ir = AT91_SAM9X60_PERINT;
|
|
else
|
|
wdt->mr |= AT91_SAM9X60_PERIODRST;
|
|
|
|
wdt_write(wdt, AT91_SAM9X60_IER, wdt->ir);
|
|
wdt_write(wdt, AT91_SAM9X60_WLR, AT91_SAM9X60_SET_COUNTER(val));
|
|
} else {
|
|
wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT));
|
|
wdt->mr |= AT91_WDT_SET_WDV(val);
|
|
|
|
if (wdt->need_irq)
|
|
wdt->mr |= AT91_WDT_WDFIEN;
|
|
else
|
|
wdt->mr |= AT91_WDT_WDRSTEN;
|
|
}
|
|
|
|
wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sama5d4_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct watchdog_device *wdd;
|
|
struct sama5d4_wdt *wdt;
|
|
void __iomem *regs;
|
|
u32 irq = 0;
|
|
int ret;
|
|
|
|
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
|
|
if (!wdt)
|
|
return -ENOMEM;
|
|
|
|
wdd = &wdt->wdd;
|
|
wdd->timeout = WDT_DEFAULT_TIMEOUT;
|
|
wdd->info = &sama5d4_wdt_info;
|
|
wdd->ops = &sama5d4_wdt_ops;
|
|
wdd->min_timeout = MIN_WDT_TIMEOUT;
|
|
wdd->max_timeout = MAX_WDT_TIMEOUT;
|
|
wdt->last_ping = jiffies;
|
|
|
|
if (of_device_is_compatible(dev->of_node, "microchip,sam9x60-wdt") ||
|
|
of_device_is_compatible(dev->of_node, "microchip,sama7g5-wdt"))
|
|
wdt->sam9x60_support = true;
|
|
|
|
watchdog_set_drvdata(wdd, wdt);
|
|
|
|
regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(regs))
|
|
return PTR_ERR(regs);
|
|
|
|
wdt->reg_base = regs;
|
|
|
|
ret = of_sama5d4_wdt_init(dev->of_node, wdt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (wdt->need_irq) {
|
|
irq = irq_of_parse_and_map(dev->of_node, 0);
|
|
if (!irq) {
|
|
dev_warn(dev, "failed to get IRQ from DT\n");
|
|
wdt->need_irq = false;
|
|
}
|
|
}
|
|
|
|
if (wdt->need_irq) {
|
|
ret = devm_request_irq(dev, irq, sama5d4_wdt_irq_handler,
|
|
IRQF_SHARED | IRQF_IRQPOLL |
|
|
IRQF_NO_SUSPEND, pdev->name, pdev);
|
|
if (ret) {
|
|
dev_err(dev, "cannot register interrupt handler\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
watchdog_init_timeout(wdd, wdt_timeout, dev);
|
|
|
|
ret = sama5d4_wdt_init(wdt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
watchdog_set_nowayout(wdd, nowayout);
|
|
|
|
watchdog_stop_on_unregister(wdd);
|
|
ret = devm_watchdog_register_device(dev, wdd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, wdt);
|
|
|
|
dev_info(dev, "initialized (timeout = %d sec, nowayout = %d)\n",
|
|
wdd->timeout, nowayout);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sama5d4_wdt_of_match[] = {
|
|
{
|
|
.compatible = "atmel,sama5d4-wdt",
|
|
},
|
|
{
|
|
.compatible = "microchip,sam9x60-wdt",
|
|
},
|
|
{
|
|
.compatible = "microchip,sama7g5-wdt",
|
|
},
|
|
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match);
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sama5d4_wdt_suspend_late(struct device *dev)
|
|
{
|
|
struct sama5d4_wdt *wdt = dev_get_drvdata(dev);
|
|
|
|
if (watchdog_active(&wdt->wdd))
|
|
sama5d4_wdt_stop(&wdt->wdd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sama5d4_wdt_resume_early(struct device *dev)
|
|
{
|
|
struct sama5d4_wdt *wdt = dev_get_drvdata(dev);
|
|
|
|
/*
|
|
* FIXME: writing MR also pings the watchdog which may not be desired.
|
|
* This should only be done when the registers are lost on suspend but
|
|
* there is no way to get this information right now.
|
|
*/
|
|
sama5d4_wdt_init(wdt);
|
|
|
|
if (watchdog_active(&wdt->wdd))
|
|
sama5d4_wdt_start(&wdt->wdd);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops sama5d4_wdt_pm_ops = {
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(sama5d4_wdt_suspend_late,
|
|
sama5d4_wdt_resume_early)
|
|
};
|
|
|
|
static struct platform_driver sama5d4_wdt_driver = {
|
|
.probe = sama5d4_wdt_probe,
|
|
.driver = {
|
|
.name = "sama5d4_wdt",
|
|
.pm = &sama5d4_wdt_pm_ops,
|
|
.of_match_table = sama5d4_wdt_of_match,
|
|
}
|
|
};
|
|
module_platform_driver(sama5d4_wdt_driver);
|
|
|
|
MODULE_AUTHOR("Atmel Corporation");
|
|
MODULE_DESCRIPTION("Atmel SAMA5D4 Watchdog Timer driver");
|
|
MODULE_LICENSE("GPL v2");
|