linux-stable/drivers/input/keyboard/omap4-keypad.c
Uwe Kleine-König ec4c61a69d Input: omap4-keypad - convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230920125829.1478827-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-09-23 19:16:41 -07:00

489 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* OMAP4 Keypad Driver
*
* Copyright (C) 2010 Texas Instruments
*
* Author: Abraham Arce <x0066660@ti.com>
* Initial Code: Syed Rafiuddin <rafiuddin.syed@ti.com>
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/pm_wakeirq.h>
/* OMAP4 registers */
#define OMAP4_KBD_REVISION 0x00
#define OMAP4_KBD_SYSCONFIG 0x10
#define OMAP4_KBD_SYSSTATUS 0x14
#define OMAP4_KBD_IRQSTATUS 0x18
#define OMAP4_KBD_IRQENABLE 0x1C
#define OMAP4_KBD_WAKEUPENABLE 0x20
#define OMAP4_KBD_PENDING 0x24
#define OMAP4_KBD_CTRL 0x28
#define OMAP4_KBD_DEBOUNCINGTIME 0x2C
#define OMAP4_KBD_LONGKEYTIME 0x30
#define OMAP4_KBD_TIMEOUT 0x34
#define OMAP4_KBD_STATEMACHINE 0x38
#define OMAP4_KBD_ROWINPUTS 0x3C
#define OMAP4_KBD_COLUMNOUTPUTS 0x40
#define OMAP4_KBD_FULLCODE31_0 0x44
#define OMAP4_KBD_FULLCODE63_32 0x48
/* OMAP4 bit definitions */
#define OMAP4_DEF_IRQENABLE_EVENTEN BIT(0)
#define OMAP4_DEF_IRQENABLE_LONGKEY BIT(1)
#define OMAP4_DEF_WUP_EVENT_ENA BIT(0)
#define OMAP4_DEF_WUP_LONG_KEY_ENA BIT(1)
#define OMAP4_DEF_CTRL_NOSOFTMODE BIT(1)
#define OMAP4_DEF_CTRL_PTV_SHIFT 2
/* OMAP4 values */
#define OMAP4_VAL_IRQDISABLE 0x0
/*
* Errata i689: If a key is released for a time shorter than debounce time,
* the keyboard will idle and never detect the key release. The workaround
* is to use at least a 12ms debounce time. See omap5432 TRM chapter
* "26.4.6.2 Keyboard Controller Timer" for more information.
*/
#define OMAP4_KEYPAD_PTV_DIV_128 0x6
#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv) \
((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1)
#define OMAP4_VAL_DEBOUNCINGTIME_16MS \
OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128)
#define OMAP4_KEYPAD_AUTOIDLE_MS 50 /* Approximate measured time */
#define OMAP4_KEYPAD_IDLE_CHECK_MS (OMAP4_KEYPAD_AUTOIDLE_MS / 2)
enum {
KBD_REVISION_OMAP4 = 0,
KBD_REVISION_OMAP5,
};
struct omap4_keypad {
struct input_dev *input;
void __iomem *base;
unsigned int irq;
struct mutex lock; /* for key scan */
unsigned int rows;
unsigned int cols;
u32 reg_offset;
u32 irqreg_offset;
unsigned int row_shift;
bool no_autorepeat;
u64 keys;
unsigned short *keymap;
};
static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
{
return __raw_readl(keypad_data->base +
keypad_data->reg_offset + offset);
}
static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
{
__raw_writel(value,
keypad_data->base + keypad_data->reg_offset + offset);
}
static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
{
return __raw_readl(keypad_data->base +
keypad_data->irqreg_offset + offset);
}
static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
u32 offset, u32 value)
{
__raw_writel(value,
keypad_data->base + keypad_data->irqreg_offset + offset);
}
static int omap4_keypad_report_keys(struct omap4_keypad *keypad_data,
u64 keys, bool down)
{
struct input_dev *input_dev = keypad_data->input;
unsigned int col, row, code;
DECLARE_BITMAP(mask, 64);
unsigned long bit;
int events = 0;
bitmap_from_u64(mask, keys);
for_each_set_bit(bit, mask, keypad_data->rows * BITS_PER_BYTE) {
row = bit / BITS_PER_BYTE;
col = bit % BITS_PER_BYTE;
code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift);
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev, keypad_data->keymap[code], down);
events++;
}
if (events)
input_sync(input_dev);
return events;
}
static void omap4_keypad_scan_keys(struct omap4_keypad *keypad_data, u64 keys)
{
u64 changed;
mutex_lock(&keypad_data->lock);
changed = keys ^ keypad_data->keys;
/*
* Report key up events separately and first. This matters in case we
* lost key-up interrupt and just now catching up.
*/
omap4_keypad_report_keys(keypad_data, changed & ~keys, false);
/* Report key down events */
omap4_keypad_report_keys(keypad_data, changed & keys, true);
keypad_data->keys = keys;
mutex_unlock(&keypad_data->lock);
}
/* Interrupt handlers */
static irqreturn_t omap4_keypad_irq_handler(int irq, void *dev_id)
{
struct omap4_keypad *keypad_data = dev_id;
if (kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS))
return IRQ_WAKE_THREAD;
return IRQ_NONE;
}
static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id)
{
struct omap4_keypad *keypad_data = dev_id;
struct device *dev = keypad_data->input->dev.parent;
u32 low, high;
int error;
u64 keys;
error = pm_runtime_resume_and_get(dev);
if (error)
return IRQ_NONE;
low = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
high = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
keys = low | (u64)high << 32;
omap4_keypad_scan_keys(keypad_data, keys);
/* clear pending interrupts */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return IRQ_HANDLED;
}
static int omap4_keypad_open(struct input_dev *input)
{
struct omap4_keypad *keypad_data = input_get_drvdata(input);
struct device *dev = input->dev.parent;
int error;
error = pm_runtime_resume_and_get(dev);
if (error)
return error;
disable_irq(keypad_data->irq);
kbd_writel(keypad_data, OMAP4_KBD_CTRL,
OMAP4_DEF_CTRL_NOSOFTMODE |
(OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT));
kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
OMAP4_VAL_DEBOUNCINGTIME_16MS);
/* clear pending interrupts */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
OMAP4_DEF_IRQENABLE_EVENTEN);
kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
OMAP4_DEF_WUP_EVENT_ENA);
enable_irq(keypad_data->irq);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return 0;
}
static void omap4_keypad_stop(struct omap4_keypad *keypad_data)
{
/* Disable interrupts and wake-up events */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
OMAP4_VAL_IRQDISABLE);
kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, 0);
/* clear pending interrupts */
kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
}
static void omap4_keypad_close(struct input_dev *input)
{
struct omap4_keypad *keypad_data = input_get_drvdata(input);
struct device *dev = input->dev.parent;
int error;
error = pm_runtime_resume_and_get(dev);
if (error)
dev_err(dev, "%s: pm_runtime_resume_and_get() failed: %d\n",
__func__, error);
disable_irq(keypad_data->irq);
omap4_keypad_stop(keypad_data);
enable_irq(keypad_data->irq);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
}
static int omap4_keypad_parse_dt(struct device *dev,
struct omap4_keypad *keypad_data)
{
struct device_node *np = dev->of_node;
int err;
err = matrix_keypad_parse_properties(dev, &keypad_data->rows,
&keypad_data->cols);
if (err)
return err;
keypad_data->no_autorepeat = of_property_read_bool(np, "linux,input-no-autorepeat");
return 0;
}
static int omap4_keypad_check_revision(struct device *dev,
struct omap4_keypad *keypad_data)
{
unsigned int rev;
rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
rev &= 0x03 << 30;
rev >>= 30;
switch (rev) {
case KBD_REVISION_OMAP4:
keypad_data->reg_offset = 0x00;
keypad_data->irqreg_offset = 0x00;
break;
case KBD_REVISION_OMAP5:
keypad_data->reg_offset = 0x10;
keypad_data->irqreg_offset = 0x0c;
break;
default:
dev_err(dev, "Keypad reports unsupported revision %d", rev);
return -EINVAL;
}
return 0;
}
/*
* Errata ID i689 "1.32 Keyboard Key Up Event Can Be Missed".
* Interrupt may not happen for key-up events. We must clear stuck
* key-up events after the keyboard hardware has auto-idled.
*/
static int omap4_keypad_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap4_keypad *keypad_data = platform_get_drvdata(pdev);
u32 active;
active = kbd_readl(keypad_data, OMAP4_KBD_STATEMACHINE);
if (active) {
pm_runtime_mark_last_busy(dev);
return -EBUSY;
}
omap4_keypad_scan_keys(keypad_data, 0);
return 0;
}
static const struct dev_pm_ops omap4_keypad_pm_ops = {
RUNTIME_PM_OPS(omap4_keypad_runtime_suspend, NULL, NULL)
};
static void omap4_disable_pm(void *d)
{
pm_runtime_dont_use_autosuspend(d);
pm_runtime_disable(d);
}
static int omap4_keypad_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct omap4_keypad *keypad_data;
struct input_dev *input_dev;
unsigned int max_keys;
int irq;
int error;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
keypad_data = devm_kzalloc(dev, sizeof(*keypad_data), GFP_KERNEL);
if (!keypad_data) {
dev_err(dev, "keypad_data memory allocation failed\n");
return -ENOMEM;
}
keypad_data->irq = irq;
mutex_init(&keypad_data->lock);
platform_set_drvdata(pdev, keypad_data);
error = omap4_keypad_parse_dt(dev, keypad_data);
if (error)
return error;
keypad_data->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(keypad_data->base))
return PTR_ERR(keypad_data->base);
pm_runtime_use_autosuspend(dev);
pm_runtime_set_autosuspend_delay(dev, OMAP4_KEYPAD_IDLE_CHECK_MS);
pm_runtime_enable(dev);
error = devm_add_action_or_reset(dev, omap4_disable_pm, dev);
if (error) {
dev_err(dev, "unable to register cleanup action\n");
return error;
}
/*
* Enable clocks for the keypad module so that we can read
* revision register.
*/
error = pm_runtime_resume_and_get(dev);
if (error) {
dev_err(dev, "pm_runtime_resume_and_get() failed\n");
return error;
}
error = omap4_keypad_check_revision(dev, keypad_data);
if (!error) {
/* Ensure device does not raise interrupts */
omap4_keypad_stop(keypad_data);
}
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
if (error)
return error;
/* input device allocation */
keypad_data->input = input_dev = devm_input_allocate_device(dev);
if (!input_dev)
return -ENOMEM;
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
input_dev->id.vendor = 0x0001;
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0001;
input_dev->open = omap4_keypad_open;
input_dev->close = omap4_keypad_close;
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
if (!keypad_data->no_autorepeat)
__set_bit(EV_REP, input_dev->evbit);
input_set_drvdata(input_dev, keypad_data);
keypad_data->row_shift = get_count_order(keypad_data->cols);
max_keys = keypad_data->rows << keypad_data->row_shift;
keypad_data->keymap = devm_kcalloc(dev,
max_keys,
sizeof(keypad_data->keymap[0]),
GFP_KERNEL);
if (!keypad_data->keymap) {
dev_err(dev, "Not enough memory for keymap\n");
return -ENOMEM;
}
error = matrix_keypad_build_keymap(NULL, NULL,
keypad_data->rows, keypad_data->cols,
keypad_data->keymap, input_dev);
if (error) {
dev_err(dev, "failed to build keymap\n");
return error;
}
error = devm_request_threaded_irq(dev, keypad_data->irq,
omap4_keypad_irq_handler,
omap4_keypad_irq_thread_fn,
IRQF_ONESHOT,
"omap4-keypad", keypad_data);
if (error) {
dev_err(dev, "failed to register interrupt\n");
return error;
}
error = input_register_device(keypad_data->input);
if (error) {
dev_err(dev, "failed to register input device\n");
return error;
}
device_init_wakeup(dev, true);
error = dev_pm_set_wake_irq(dev, keypad_data->irq);
if (error)
dev_warn(dev, "failed to set up wakeup irq: %d\n", error);
return 0;
}
static void omap4_keypad_remove(struct platform_device *pdev)
{
dev_pm_clear_wake_irq(&pdev->dev);
}
static const struct of_device_id omap_keypad_dt_match[] = {
{ .compatible = "ti,omap4-keypad" },
{},
};
MODULE_DEVICE_TABLE(of, omap_keypad_dt_match);
static struct platform_driver omap4_keypad_driver = {
.probe = omap4_keypad_probe,
.remove_new = omap4_keypad_remove,
.driver = {
.name = "omap4-keypad",
.of_match_table = omap_keypad_dt_match,
.pm = pm_ptr(&omap4_keypad_pm_ops),
},
};
module_platform_driver(omap4_keypad_driver);
MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("OMAP4 Keypad Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:omap4-keypad");