mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 17:08:10 +00:00
c83c199199
This adds support for probing the COH 901 327 watchdog from the device tree and also adds associated bindings. Acked-by: Wim Van Sebroeck <wim@iguana.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
469 lines
13 KiB
C
469 lines
13 KiB
C
/*
|
|
* coh901327_wdt.c
|
|
*
|
|
* Copyright (C) 2008-2009 ST-Ericsson AB
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
* Watchdog driver for the ST-Ericsson AB COH 901 327 IP core
|
|
* Author: Linus Walleij <linus.walleij@stericsson.com>
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/watchdog.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
|
|
#define DRV_NAME "WDOG COH 901 327"
|
|
|
|
/*
|
|
* COH 901 327 register definitions
|
|
*/
|
|
|
|
/* WDOG_FEED Register 32bit (-/W) */
|
|
#define U300_WDOG_FR 0x00
|
|
#define U300_WDOG_FR_FEED_RESTART_TIMER 0xFEEDU
|
|
/* WDOG_TIMEOUT Register 32bit (R/W) */
|
|
#define U300_WDOG_TR 0x04
|
|
#define U300_WDOG_TR_TIMEOUT_MASK 0x7FFFU
|
|
/* WDOG_DISABLE1 Register 32bit (-/W) */
|
|
#define U300_WDOG_D1R 0x08
|
|
#define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER 0x2BADU
|
|
/* WDOG_DISABLE2 Register 32bit (R/W) */
|
|
#define U300_WDOG_D2R 0x0C
|
|
#define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER 0xCAFEU
|
|
#define U300_WDOG_D2R_DISABLE_STATUS_DISABLED 0xDABEU
|
|
#define U300_WDOG_D2R_DISABLE_STATUS_ENABLED 0x0000U
|
|
/* WDOG_STATUS Register 32bit (R/W) */
|
|
#define U300_WDOG_SR 0x10
|
|
#define U300_WDOG_SR_STATUS_TIMED_OUT 0xCFE8U
|
|
#define U300_WDOG_SR_STATUS_NORMAL 0x0000U
|
|
#define U300_WDOG_SR_RESET_STATUS_RESET 0xE8B4U
|
|
/* WDOG_COUNT Register 32bit (R/-) */
|
|
#define U300_WDOG_CR 0x14
|
|
#define U300_WDOG_CR_VALID_IND 0x8000U
|
|
#define U300_WDOG_CR_VALID_STABLE 0x0000U
|
|
#define U300_WDOG_CR_COUNT_VALUE_MASK 0x7FFFU
|
|
/* WDOG_JTAGOVR Register 32bit (R/W) */
|
|
#define U300_WDOG_JOR 0x18
|
|
#define U300_WDOG_JOR_JTAG_MODE_IND 0x0002U
|
|
#define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE 0x0001U
|
|
/* WDOG_RESTART Register 32bit (-/W) */
|
|
#define U300_WDOG_RR 0x1C
|
|
#define U300_WDOG_RR_RESTART_VALUE_RESUME 0xACEDU
|
|
/* WDOG_IRQ_EVENT Register 32bit (R/W) */
|
|
#define U300_WDOG_IER 0x20
|
|
#define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND 0x0001U
|
|
#define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE 0x0001U
|
|
/* WDOG_IRQ_MASK Register 32bit (R/W) */
|
|
#define U300_WDOG_IMR 0x24
|
|
#define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE 0x0001U
|
|
/* WDOG_IRQ_FORCE Register 32bit (R/W) */
|
|
#define U300_WDOG_IFR 0x28
|
|
#define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U
|
|
|
|
/* Default timeout in seconds = 1 minute */
|
|
static unsigned int margin = 60;
|
|
static resource_size_t phybase;
|
|
static resource_size_t physize;
|
|
static int irq;
|
|
static void __iomem *virtbase;
|
|
static struct device *parent;
|
|
|
|
/*
|
|
* The watchdog block is of course always clocked, the
|
|
* clk_enable()/clk_disable() calls are mainly for performing reference
|
|
* counting higher up in the clock hierarchy.
|
|
*/
|
|
static struct clk *clk;
|
|
|
|
/*
|
|
* Enabling and disabling functions.
|
|
*/
|
|
static void coh901327_enable(u16 timeout)
|
|
{
|
|
u16 val;
|
|
unsigned long freq;
|
|
unsigned long delay_ns;
|
|
|
|
clk_enable(clk);
|
|
/* Restart timer if it is disabled */
|
|
val = readw(virtbase + U300_WDOG_D2R);
|
|
if (val == U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
|
|
writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
|
|
virtbase + U300_WDOG_RR);
|
|
/* Acknowledge any pending interrupt so it doesn't just fire off */
|
|
writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
|
|
virtbase + U300_WDOG_IER);
|
|
/*
|
|
* The interrupt is cleared in the 32 kHz clock domain.
|
|
* Wait 3 32 kHz cycles for it to take effect
|
|
*/
|
|
freq = clk_get_rate(clk);
|
|
delay_ns = DIV_ROUND_UP(1000000000, freq); /* Freq to ns and round up */
|
|
delay_ns = 3 * delay_ns; /* Wait 3 cycles */
|
|
ndelay(delay_ns);
|
|
/* Enable the watchdog interrupt */
|
|
writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
|
|
/* Activate the watchdog timer */
|
|
writew(timeout, virtbase + U300_WDOG_TR);
|
|
/* Start the watchdog timer */
|
|
writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR);
|
|
/*
|
|
* Extra read so that this change propagate in the watchdog.
|
|
*/
|
|
(void) readw(virtbase + U300_WDOG_CR);
|
|
val = readw(virtbase + U300_WDOG_D2R);
|
|
clk_disable(clk);
|
|
if (val != U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
|
|
dev_err(parent,
|
|
"%s(): watchdog not enabled! D2R value %04x\n",
|
|
__func__, val);
|
|
}
|
|
|
|
static void coh901327_disable(void)
|
|
{
|
|
u16 val;
|
|
|
|
clk_enable(clk);
|
|
/* Disable the watchdog interrupt if it is active */
|
|
writew(0x0000U, virtbase + U300_WDOG_IMR);
|
|
/* If the watchdog is currently enabled, attempt to disable it */
|
|
val = readw(virtbase + U300_WDOG_D2R);
|
|
if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) {
|
|
writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER,
|
|
virtbase + U300_WDOG_D1R);
|
|
writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
|
|
virtbase + U300_WDOG_D2R);
|
|
/* Write this twice (else problems occur) */
|
|
writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
|
|
virtbase + U300_WDOG_D2R);
|
|
}
|
|
val = readw(virtbase + U300_WDOG_D2R);
|
|
clk_disable(clk);
|
|
if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
|
|
dev_err(parent,
|
|
"%s(): watchdog not disabled! D2R value %04x\n",
|
|
__func__, val);
|
|
}
|
|
|
|
static int coh901327_start(struct watchdog_device *wdt_dev)
|
|
{
|
|
coh901327_enable(wdt_dev->timeout * 100);
|
|
return 0;
|
|
}
|
|
|
|
static int coh901327_stop(struct watchdog_device *wdt_dev)
|
|
{
|
|
coh901327_disable();
|
|
return 0;
|
|
}
|
|
|
|
static int coh901327_ping(struct watchdog_device *wdd)
|
|
{
|
|
clk_enable(clk);
|
|
/* Feed the watchdog */
|
|
writew(U300_WDOG_FR_FEED_RESTART_TIMER,
|
|
virtbase + U300_WDOG_FR);
|
|
clk_disable(clk);
|
|
return 0;
|
|
}
|
|
|
|
static int coh901327_settimeout(struct watchdog_device *wdt_dev,
|
|
unsigned int time)
|
|
{
|
|
wdt_dev->timeout = time;
|
|
clk_enable(clk);
|
|
/* Set new timeout value */
|
|
writew(time * 100, virtbase + U300_WDOG_TR);
|
|
/* Feed the dog */
|
|
writew(U300_WDOG_FR_FEED_RESTART_TIMER,
|
|
virtbase + U300_WDOG_FR);
|
|
clk_disable(clk);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int coh901327_gettimeleft(struct watchdog_device *wdt_dev)
|
|
{
|
|
u16 val;
|
|
|
|
clk_enable(clk);
|
|
/* Read repeatedly until the value is stable! */
|
|
val = readw(virtbase + U300_WDOG_CR);
|
|
while (val & U300_WDOG_CR_VALID_IND)
|
|
val = readw(virtbase + U300_WDOG_CR);
|
|
val &= U300_WDOG_CR_COUNT_VALUE_MASK;
|
|
clk_disable(clk);
|
|
if (val != 0)
|
|
val /= 100;
|
|
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* This interrupt occurs 10 ms before the watchdog WILL bark.
|
|
*/
|
|
static irqreturn_t coh901327_interrupt(int irq, void *data)
|
|
{
|
|
u16 val;
|
|
|
|
/*
|
|
* Ack IRQ? If this occurs we're FUBAR anyway, so
|
|
* just acknowledge, disable the interrupt and await the imminent end.
|
|
* If you at some point need a host of callbacks to be called
|
|
* when the system is about to watchdog-reset, add them here!
|
|
*
|
|
* NOTE: on future versions of this IP-block, it will be possible
|
|
* to prevent a watchdog reset by feeding the watchdog at this
|
|
* point.
|
|
*/
|
|
clk_enable(clk);
|
|
val = readw(virtbase + U300_WDOG_IER);
|
|
if (val == U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND)
|
|
writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
|
|
virtbase + U300_WDOG_IER);
|
|
writew(0x0000U, virtbase + U300_WDOG_IMR);
|
|
clk_disable(clk);
|
|
dev_crit(parent, "watchdog is barking!\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct watchdog_info coh901327_ident = {
|
|
.options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
|
|
.identity = DRV_NAME,
|
|
};
|
|
|
|
static struct watchdog_ops coh901327_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = coh901327_start,
|
|
.stop = coh901327_stop,
|
|
.ping = coh901327_ping,
|
|
.set_timeout = coh901327_settimeout,
|
|
.get_timeleft = coh901327_gettimeleft,
|
|
};
|
|
|
|
static struct watchdog_device coh901327_wdt = {
|
|
.info = &coh901327_ident,
|
|
.ops = &coh901327_ops,
|
|
/*
|
|
* Max timeout is 327 since the 10ms
|
|
* timeout register is max
|
|
* 0x7FFF = 327670ms ~= 327s.
|
|
*/
|
|
.min_timeout = 0,
|
|
.max_timeout = 327,
|
|
};
|
|
|
|
static int __exit coh901327_remove(struct platform_device *pdev)
|
|
{
|
|
watchdog_unregister_device(&coh901327_wdt);
|
|
coh901327_disable();
|
|
free_irq(irq, pdev);
|
|
clk_unprepare(clk);
|
|
clk_put(clk);
|
|
iounmap(virtbase);
|
|
release_mem_region(phybase, physize);
|
|
return 0;
|
|
}
|
|
|
|
static int __init coh901327_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
u16 val;
|
|
struct resource *res;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENOENT;
|
|
|
|
parent = &pdev->dev;
|
|
physize = resource_size(res);
|
|
phybase = res->start;
|
|
|
|
if (request_mem_region(phybase, physize, DRV_NAME) == NULL) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
virtbase = ioremap(phybase, physize);
|
|
if (!virtbase) {
|
|
ret = -ENOMEM;
|
|
goto out_no_remap;
|
|
}
|
|
|
|
clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(clk)) {
|
|
ret = PTR_ERR(clk);
|
|
dev_err(&pdev->dev, "could not get clock\n");
|
|
goto out_no_clk;
|
|
}
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "could not prepare and enable clock\n");
|
|
goto out_no_clk_enable;
|
|
}
|
|
|
|
val = readw(virtbase + U300_WDOG_SR);
|
|
switch (val) {
|
|
case U300_WDOG_SR_STATUS_TIMED_OUT:
|
|
dev_info(&pdev->dev,
|
|
"watchdog timed out since last chip reset!\n");
|
|
coh901327_wdt.bootstatus |= WDIOF_CARDRESET;
|
|
/* Status will be cleared below */
|
|
break;
|
|
case U300_WDOG_SR_STATUS_NORMAL:
|
|
dev_info(&pdev->dev,
|
|
"in normal status, no timeouts have occurred.\n");
|
|
break;
|
|
default:
|
|
dev_info(&pdev->dev,
|
|
"contains an illegal status code (%08x)\n", val);
|
|
break;
|
|
}
|
|
|
|
val = readw(virtbase + U300_WDOG_D2R);
|
|
switch (val) {
|
|
case U300_WDOG_D2R_DISABLE_STATUS_DISABLED:
|
|
dev_info(&pdev->dev, "currently disabled.\n");
|
|
break;
|
|
case U300_WDOG_D2R_DISABLE_STATUS_ENABLED:
|
|
dev_info(&pdev->dev,
|
|
"currently enabled! (disabling it now)\n");
|
|
coh901327_disable();
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev,
|
|
"contains an illegal enable/disable code (%08x)\n",
|
|
val);
|
|
break;
|
|
}
|
|
|
|
/* Reset the watchdog */
|
|
writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (request_irq(irq, coh901327_interrupt, 0,
|
|
DRV_NAME " Bark", pdev)) {
|
|
ret = -EIO;
|
|
goto out_no_irq;
|
|
}
|
|
|
|
clk_disable(clk);
|
|
|
|
ret = watchdog_init_timeout(&coh901327_wdt, margin, &pdev->dev);
|
|
if (ret < 0)
|
|
coh901327_wdt.timeout = 60;
|
|
|
|
ret = watchdog_register_device(&coh901327_wdt);
|
|
if (ret == 0)
|
|
dev_info(&pdev->dev,
|
|
"initialized. timer margin=%d sec\n", margin);
|
|
else
|
|
goto out_no_wdog;
|
|
|
|
return 0;
|
|
|
|
out_no_wdog:
|
|
free_irq(irq, pdev);
|
|
out_no_irq:
|
|
clk_disable_unprepare(clk);
|
|
out_no_clk_enable:
|
|
clk_put(clk);
|
|
out_no_clk:
|
|
iounmap(virtbase);
|
|
out_no_remap:
|
|
release_mem_region(phybase, SZ_4K);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static u16 wdogenablestore;
|
|
static u16 irqmaskstore;
|
|
|
|
static int coh901327_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U;
|
|
wdogenablestore = readw(virtbase + U300_WDOG_D2R);
|
|
/* If watchdog is on, disable it here and now */
|
|
if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
|
|
coh901327_disable();
|
|
return 0;
|
|
}
|
|
|
|
static int coh901327_resume(struct platform_device *pdev)
|
|
{
|
|
/* Restore the watchdog interrupt */
|
|
writew(irqmaskstore, virtbase + U300_WDOG_IMR);
|
|
if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) {
|
|
/* Restart the watchdog timer */
|
|
writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
|
|
virtbase + U300_WDOG_RR);
|
|
writew(U300_WDOG_FR_FEED_RESTART_TIMER,
|
|
virtbase + U300_WDOG_FR);
|
|
}
|
|
return 0;
|
|
}
|
|
#else
|
|
#define coh901327_suspend NULL
|
|
#define coh901327_resume NULL
|
|
#endif
|
|
|
|
/*
|
|
* Mistreating the watchdog is the only way to perform a software reset of the
|
|
* system on EMP platforms. So we implement this and export a symbol for it.
|
|
*/
|
|
void coh901327_watchdog_reset(void)
|
|
{
|
|
/* Enable even if on JTAG too */
|
|
writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE,
|
|
virtbase + U300_WDOG_JOR);
|
|
/*
|
|
* Timeout = 5s, we have to wait for the watchdog reset to
|
|
* actually take place: the watchdog will be reloaded with the
|
|
* default value immediately, so we HAVE to reboot and get back
|
|
* into the kernel in 30s, or the device will reboot again!
|
|
* The boot loader will typically deactivate the watchdog, so we
|
|
* need time enough for the boot loader to get to the point of
|
|
* deactivating the watchdog before it is shut down by it.
|
|
*
|
|
* NOTE: on future versions of the watchdog, this restriction is
|
|
* gone: the watchdog will be reloaded with a default value (1 min)
|
|
* instead of last value, and you can conveniently set the watchdog
|
|
* timeout to 10ms (value = 1) without any problems.
|
|
*/
|
|
coh901327_enable(500);
|
|
/* Return and await doom */
|
|
}
|
|
|
|
static const struct of_device_id coh901327_dt_match[] = {
|
|
{ .compatible = "stericsson,coh901327" },
|
|
{},
|
|
};
|
|
|
|
static struct platform_driver coh901327_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "coh901327_wdog",
|
|
.of_match_table = coh901327_dt_match,
|
|
},
|
|
.remove = __exit_p(coh901327_remove),
|
|
.suspend = coh901327_suspend,
|
|
.resume = coh901327_resume,
|
|
};
|
|
|
|
module_platform_driver_probe(coh901327_driver, coh901327_probe);
|
|
|
|
MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
|
|
MODULE_DESCRIPTION("COH 901 327 Watchdog");
|
|
|
|
module_param(margin, uint, 0);
|
|
MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:coh901327-watchdog");
|