linux-stable/drivers/iio/Makefile
William Breathitt Gray 28e5d3bb03 iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8
The ACCES 104-QUAD-8 is a general purpose quadrature encoder
counter/interface board. The 104-QUAD-8 is capable of monitoring the
outputs of eight encoders via four on-board LSI/CSI LS7266R1 24-bit
dual-axis quadrature counter chips. Core functions handled by the
LS7266R1, such as direction and total count, are available.

Performing a write to a counter's IIO_CHAN_INFO_RAW sets the counter and
also clears the counter's respective error flag. Although the counters
have a 25-bit range, only the lower 24 bits may be set, either directly
or via a counter's preset attribute. Interrupts are not supported by
this driver.

This driver adds IIO support for the ACCES 104-QUAD-8 and ACCES
104-QUAD-4. The base port addresses for the devices may be configured
via the base array module parameter.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-01 17:06:21 +01:00

37 lines
931 B
Makefile

#
# Makefile for the industrial I/O core.
#
obj-$(CONFIG_IIO) += industrialio.o
industrialio-y := industrialio-core.o industrialio-event.o inkern.o
industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
obj-$(CONFIG_IIO_CONFIGFS) += industrialio-configfs.o
obj-$(CONFIG_IIO_SW_DEVICE) += industrialio-sw-device.o
obj-$(CONFIG_IIO_SW_TRIGGER) += industrialio-sw-trigger.o
obj-$(CONFIG_IIO_TRIGGERED_EVENT) += industrialio-triggered-event.o
obj-y += accel/
obj-y += adc/
obj-y += amplifiers/
obj-y += buffer/
obj-y += chemical/
obj-y += common/
obj-y += counter/
obj-y += dac/
obj-y += dummy/
obj-y += gyro/
obj-y += frequency/
obj-y += health/
obj-y += humidity/
obj-y += imu/
obj-y += light/
obj-y += magnetometer/
obj-y += orientation/
obj-y += potentiometer/
obj-y += potentiostat/
obj-y += pressure/
obj-y += proximity/
obj-y += temperature/
obj-y += trigger/