mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-28 11:49:32 +00:00
![Khalid Aziz](/assets/img/avatar_default.png)
[jejb: fix up pointer to int cast warning] Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
1302 lines
34 KiB
C
1302 lines
34 KiB
C
/*
|
|
|
|
Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
|
|
|
|
Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
|
|
|
|
This program is free software; you may redistribute and/or modify it under
|
|
the terms of the GNU General Public License Version 2 as published by the
|
|
Free Software Foundation.
|
|
|
|
This program is distributed in the hope that it will be useful, but
|
|
WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
|
|
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
for complete details.
|
|
|
|
The author respectfully requests that any modifications to this software be
|
|
sent directly to him for evaluation and testing.
|
|
|
|
Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
|
|
advice has been invaluable, to David Gentzel, for writing the original Linux
|
|
BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
|
|
|
|
Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
|
|
Manager available as freely redistributable source code.
|
|
|
|
*/
|
|
|
|
#ifndef _BUSLOGIC_H
|
|
#define _BUSLOGIC_H
|
|
|
|
|
|
#ifndef PACKED
|
|
#define PACKED __attribute__((packed))
|
|
#endif
|
|
|
|
/*
|
|
Define the maximum number of BusLogic Host Adapters supported by this driver.
|
|
*/
|
|
|
|
#define BLOGIC_MAX_ADAPTERS 16
|
|
|
|
|
|
/*
|
|
Define the maximum number of Target Devices supported by this driver.
|
|
*/
|
|
|
|
#define BLOGIC_MAXDEV 16
|
|
|
|
|
|
/*
|
|
Define the maximum number of Scatter/Gather Segments used by this driver.
|
|
For optimal performance, it is important that this limit be at least as
|
|
large as the largest single request generated by the I/O Subsystem.
|
|
*/
|
|
|
|
#define BLOGIC_SG_LIMIT 128
|
|
|
|
|
|
/*
|
|
Define the maximum, maximum automatic, minimum automatic, and default Queue
|
|
Depth to allow for Target Devices depending on whether or not they support
|
|
Tagged Queuing and whether or not ISA Bounce Buffers are required.
|
|
*/
|
|
|
|
#define BLOGIC_MAX_TAG_DEPTH 64
|
|
#define BLOGIC_MAX_AUTO_TAG_DEPTH 28
|
|
#define BLOGIC_MIN_AUTO_TAG_DEPTH 7
|
|
#define BLOGIC_TAG_DEPTH_BB 3
|
|
#define BLOGIC_UNTAG_DEPTH 3
|
|
#define BLOGIC_UNTAG_DEPTH_BB 2
|
|
|
|
|
|
/*
|
|
Define the default amount of time in seconds to wait between a Host Adapter
|
|
Hard Reset which initiates a SCSI Bus Reset and issuing any SCSI commands.
|
|
Some SCSI devices get confused if they receive SCSI commands too soon after
|
|
a SCSI Bus Reset.
|
|
*/
|
|
|
|
#define BLOGIC_BUS_SETTLE_TIME 2
|
|
|
|
|
|
/*
|
|
Define the maximum number of Mailboxes that should be used for MultiMaster
|
|
Host Adapters. This number is chosen to be larger than the maximum Host
|
|
Adapter Queue Depth and small enough so that the Host Adapter structure
|
|
does not cross an allocation block size boundary.
|
|
*/
|
|
|
|
#define BLOGIC_MAX_MAILBOX 211
|
|
|
|
|
|
/*
|
|
Define the number of CCBs that should be allocated as a group to optimize
|
|
Kernel memory allocation.
|
|
*/
|
|
|
|
#define BLOGIC_CCB_GRP_ALLOCSIZE 7
|
|
|
|
|
|
/*
|
|
Define the Host Adapter Line and Message Buffer Sizes.
|
|
*/
|
|
|
|
#define BLOGIC_LINEBUF_SIZE 100
|
|
#define BLOGIC_MSGBUF_SIZE 9700
|
|
|
|
|
|
/*
|
|
Define the Driver Message Levels.
|
|
*/
|
|
|
|
enum blogic_msglevel {
|
|
BLOGIC_ANNOUNCE_LEVEL = 0,
|
|
BLOGIC_INFO_LEVEL = 1,
|
|
BLOGIC_NOTICE_LEVEL = 2,
|
|
BLOGIC_WARN_LEVEL = 3,
|
|
BLOGIC_ERR_LEVEL = 4
|
|
};
|
|
|
|
static char *blogic_msglevelmap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, KERN_ERR };
|
|
|
|
|
|
/*
|
|
Define Driver Message macros.
|
|
*/
|
|
|
|
#define blogic_announce(format, args...) \
|
|
blogic_msg(BLOGIC_ANNOUNCE_LEVEL, format, ##args)
|
|
|
|
#define blogic_info(format, args...) \
|
|
blogic_msg(BLOGIC_INFO_LEVEL, format, ##args)
|
|
|
|
#define blogic_notice(format, args...) \
|
|
blogic_msg(BLOGIC_NOTICE_LEVEL, format, ##args)
|
|
|
|
#define blogic_warn(format, args...) \
|
|
blogic_msg(BLOGIC_WARN_LEVEL, format, ##args)
|
|
|
|
#define blogic_err(format, args...) \
|
|
blogic_msg(BLOGIC_ERR_LEVEL, format, ##args)
|
|
|
|
|
|
/*
|
|
Define the types of BusLogic Host Adapters that are supported and the number
|
|
of I/O Addresses required by each type.
|
|
*/
|
|
|
|
enum blogic_adapter_type {
|
|
BLOGIC_MULTIMASTER = 1,
|
|
BLOGIC_FLASHPOINT = 2
|
|
} PACKED;
|
|
|
|
#define BLOGIC_MULTIMASTER_ADDR_COUNT 4
|
|
#define BLOGIC_FLASHPOINT_ADDR_COUNT 256
|
|
|
|
static int blogic_adapter_addr_count[3] = { 0, BLOGIC_MULTIMASTER_ADDR_COUNT, BLOGIC_FLASHPOINT_ADDR_COUNT };
|
|
|
|
|
|
/*
|
|
Define macros for testing the Host Adapter Type.
|
|
*/
|
|
|
|
#ifdef CONFIG_SCSI_FLASHPOINT
|
|
|
|
#define blogic_multimaster_type(adapter) \
|
|
(adapter->adapter_type == BLOGIC_MULTIMASTER)
|
|
|
|
#define blogic_flashpoint_type(adapter) \
|
|
(adapter->adapter_type == BLOGIC_FLASHPOINT)
|
|
|
|
#else
|
|
|
|
#define blogic_multimaster_type(adapter) (true)
|
|
#define blogic_flashpoint_type(adapter) (false)
|
|
|
|
#endif
|
|
|
|
|
|
/*
|
|
Define the possible Host Adapter Bus Types.
|
|
*/
|
|
|
|
enum blogic_adapter_bus_type {
|
|
BLOGIC_UNKNOWN_BUS = 0,
|
|
BLOGIC_ISA_BUS = 1,
|
|
BLOGIC_EISA_BUS = 2,
|
|
BLOGIC_PCI_BUS = 3,
|
|
BLOGIC_VESA_BUS = 4,
|
|
BLOGIC_MCA_BUS = 5
|
|
} PACKED;
|
|
|
|
static char *blogic_adapter_busnames[] = { "Unknown", "ISA", "EISA", "PCI", "VESA", "MCA" };
|
|
|
|
static enum blogic_adapter_bus_type blogic_adater_bus_types[] = {
|
|
BLOGIC_VESA_BUS, /* BT-4xx */
|
|
BLOGIC_ISA_BUS, /* BT-5xx */
|
|
BLOGIC_MCA_BUS, /* BT-6xx */
|
|
BLOGIC_EISA_BUS, /* BT-7xx */
|
|
BLOGIC_UNKNOWN_BUS, /* BT-8xx */
|
|
BLOGIC_PCI_BUS /* BT-9xx */
|
|
};
|
|
|
|
/*
|
|
Define the possible Host Adapter BIOS Disk Geometry Translations.
|
|
*/
|
|
|
|
enum blogic_bios_diskgeometry {
|
|
BLOGIC_BIOS_NODISK = 0,
|
|
BLOGIC_BIOS_DISK64x32 = 1,
|
|
BLOGIC_BIOS_DISK128x32 = 2,
|
|
BLOGIC_BIOS_DISK255x63 = 3
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define a 10^18 Statistics Byte Counter data type.
|
|
*/
|
|
|
|
struct blogic_byte_count {
|
|
unsigned int units;
|
|
unsigned int billions;
|
|
};
|
|
|
|
|
|
/*
|
|
Define the structure for I/O Address and Bus Probing Information.
|
|
*/
|
|
|
|
struct blogic_probeinfo {
|
|
enum blogic_adapter_type adapter_type;
|
|
enum blogic_adapter_bus_type adapter_bus_type;
|
|
unsigned long io_addr;
|
|
unsigned long pci_addr;
|
|
struct pci_dev *pci_device;
|
|
unsigned char bus;
|
|
unsigned char dev;
|
|
unsigned char irq_ch;
|
|
};
|
|
|
|
/*
|
|
Define the Probe Options.
|
|
*/
|
|
|
|
struct blogic_probe_options {
|
|
bool noprobe:1; /* Bit 0 */
|
|
bool noprobe_isa:1; /* Bit 1 */
|
|
bool noprobe_pci:1; /* Bit 2 */
|
|
bool nosort_pci:1; /* Bit 3 */
|
|
bool multimaster_first:1; /* Bit 4 */
|
|
bool flashpoint_first:1; /* Bit 5 */
|
|
bool limited_isa:1; /* Bit 6 */
|
|
bool probe330:1; /* Bit 7 */
|
|
bool probe334:1; /* Bit 8 */
|
|
bool probe230:1; /* Bit 9 */
|
|
bool probe234:1; /* Bit 10 */
|
|
bool probe130:1; /* Bit 11 */
|
|
bool probe134:1; /* Bit 12 */
|
|
};
|
|
|
|
/*
|
|
Define the Global Options.
|
|
*/
|
|
|
|
struct blogic_global_options {
|
|
bool trace_probe:1; /* Bit 0 */
|
|
bool trace_hw_reset:1; /* Bit 1 */
|
|
bool trace_config:1; /* Bit 2 */
|
|
bool trace_err:1; /* Bit 3 */
|
|
};
|
|
|
|
/*
|
|
Define the BusLogic SCSI Host Adapter I/O Register Offsets.
|
|
*/
|
|
|
|
#define BLOGIC_CNTRL_REG 0 /* WO register */
|
|
#define BLOGIC_STATUS_REG 0 /* RO register */
|
|
#define BLOGIC_CMD_PARM_REG 1 /* WO register */
|
|
#define BLOGIC_DATAIN_REG 1 /* RO register */
|
|
#define BLOGIC_INT_REG 2 /* RO register */
|
|
#define BLOGIC_GEOMETRY_REG 3 /* RO register */
|
|
|
|
/*
|
|
Define the structure of the write-only Control Register.
|
|
*/
|
|
|
|
union blogic_cntrl_reg {
|
|
unsigned char all;
|
|
struct {
|
|
unsigned char:4; /* Bits 0-3 */
|
|
bool bus_reset:1; /* Bit 4 */
|
|
bool int_reset:1; /* Bit 5 */
|
|
bool soft_reset:1; /* Bit 6 */
|
|
bool hard_reset:1; /* Bit 7 */
|
|
} cr;
|
|
};
|
|
|
|
/*
|
|
Define the structure of the read-only Status Register.
|
|
*/
|
|
|
|
union blogic_stat_reg {
|
|
unsigned char all;
|
|
struct {
|
|
bool cmd_invalid:1; /* Bit 0 */
|
|
bool rsvd:1; /* Bit 1 */
|
|
bool datain_ready:1; /* Bit 2 */
|
|
bool cmd_param_busy:1; /* Bit 3 */
|
|
bool adapter_ready:1; /* Bit 4 */
|
|
bool init_reqd:1; /* Bit 5 */
|
|
bool diag_failed:1; /* Bit 6 */
|
|
bool diag_active:1; /* Bit 7 */
|
|
} sr;
|
|
};
|
|
|
|
/*
|
|
Define the structure of the read-only Interrupt Register.
|
|
*/
|
|
|
|
union blogic_int_reg {
|
|
unsigned char all;
|
|
struct {
|
|
bool mailin_loaded:1; /* Bit 0 */
|
|
bool mailout_avail:1; /* Bit 1 */
|
|
bool cmd_complete:1; /* Bit 2 */
|
|
bool ext_busreset:1; /* Bit 3 */
|
|
unsigned char rsvd:3; /* Bits 4-6 */
|
|
bool int_valid:1; /* Bit 7 */
|
|
} ir;
|
|
};
|
|
|
|
/*
|
|
Define the structure of the read-only Geometry Register.
|
|
*/
|
|
|
|
union blogic_geo_reg {
|
|
unsigned char all;
|
|
struct {
|
|
enum blogic_bios_diskgeometry d0_geo:2; /* Bits 0-1 */
|
|
enum blogic_bios_diskgeometry d1_geo:2; /* Bits 2-3 */
|
|
unsigned char:3; /* Bits 4-6 */
|
|
bool ext_trans_enable:1; /* Bit 7 */
|
|
} gr;
|
|
};
|
|
|
|
/*
|
|
Define the BusLogic SCSI Host Adapter Command Register Operation Codes.
|
|
*/
|
|
|
|
enum blogic_opcode {
|
|
BLOGIC_TEST_CMP_COMPLETE = 0x00,
|
|
BLOGIC_INIT_MBOX = 0x01,
|
|
BLOGIC_EXEC_MBOX_CMD = 0x02,
|
|
BLOGIC_EXEC_BIOS_CMD = 0x03,
|
|
BLOGIC_GET_BOARD_ID = 0x04,
|
|
BLOGIC_ENABLE_OUTBOX_AVAIL_INT = 0x05,
|
|
BLOGIC_SET_SELECT_TIMEOUT = 0x06,
|
|
BLOGIC_SET_PREEMPT_TIME = 0x07,
|
|
BLOGIC_SET_TIMEOFF_BUS = 0x08,
|
|
BLOGIC_SET_TXRATE = 0x09,
|
|
BLOGIC_INQ_DEV0TO7 = 0x0A,
|
|
BLOGIC_INQ_CONFIG = 0x0B,
|
|
BLOGIC_TGT_MODE = 0x0C,
|
|
BLOGIC_INQ_SETUPINFO = 0x0D,
|
|
BLOGIC_WRITE_LOCALRAM = 0x1A,
|
|
BLOGIC_READ_LOCALRAM = 0x1B,
|
|
BLOGIC_WRITE_BUSMASTER_FIFO = 0x1C,
|
|
BLOGIC_READ_BUSMASTER_FIFO = 0x1D,
|
|
BLOGIC_ECHO_CMDDATA = 0x1F,
|
|
BLOGIC_ADAPTER_DIAG = 0x20,
|
|
BLOGIC_SET_OPTIONS = 0x21,
|
|
BLOGIC_INQ_DEV8TO15 = 0x23,
|
|
BLOGIC_INQ_DEV = 0x24,
|
|
BLOGIC_DISABLE_INT = 0x25,
|
|
BLOGIC_INIT_EXT_MBOX = 0x81,
|
|
BLOGIC_EXEC_SCS_CMD = 0x83,
|
|
BLOGIC_INQ_FWVER_D3 = 0x84,
|
|
BLOGIC_INQ_FWVER_LETTER = 0x85,
|
|
BLOGIC_INQ_PCI_INFO = 0x86,
|
|
BLOGIC_INQ_MODELNO = 0x8B,
|
|
BLOGIC_INQ_SYNC_PERIOD = 0x8C,
|
|
BLOGIC_INQ_EXTSETUP = 0x8D,
|
|
BLOGIC_STRICT_RR = 0x8F,
|
|
BLOGIC_STORE_LOCALRAM = 0x90,
|
|
BLOGIC_FETCH_LOCALRAM = 0x91,
|
|
BLOGIC_STORE_TO_EEPROM = 0x92,
|
|
BLOGIC_LOAD_AUTOSCSICODE = 0x94,
|
|
BLOGIC_MOD_IOADDR = 0x95,
|
|
BLOGIC_SETCCB_FMT = 0x96,
|
|
BLOGIC_WRITE_INQBUF = 0x9A,
|
|
BLOGIC_READ_INQBUF = 0x9B,
|
|
BLOGIC_FLASH_LOAD = 0xA7,
|
|
BLOGIC_READ_SCAMDATA = 0xA8,
|
|
BLOGIC_WRITE_SCAMDATA = 0xA9
|
|
};
|
|
|
|
/*
|
|
Define the Inquire Board ID reply structure.
|
|
*/
|
|
|
|
struct blogic_board_id {
|
|
unsigned char type; /* Byte 0 */
|
|
unsigned char custom_features; /* Byte 1 */
|
|
unsigned char fw_ver_digit1; /* Byte 2 */
|
|
unsigned char fw_ver_digit2; /* Byte 3 */
|
|
};
|
|
|
|
/*
|
|
Define the Inquire Configuration reply structure.
|
|
*/
|
|
|
|
struct blogic_config {
|
|
unsigned char:5; /* Byte 0 Bits 0-4 */
|
|
bool dma_ch5:1; /* Byte 0 Bit 5 */
|
|
bool dma_ch6:1; /* Byte 0 Bit 6 */
|
|
bool dma_ch7:1; /* Byte 0 Bit 7 */
|
|
bool irq_ch9:1; /* Byte 1 Bit 0 */
|
|
bool irq_ch10:1; /* Byte 1 Bit 1 */
|
|
bool irq_ch11:1; /* Byte 1 Bit 2 */
|
|
bool irq_ch12:1; /* Byte 1 Bit 3 */
|
|
unsigned char:1; /* Byte 1 Bit 4 */
|
|
bool irq_ch14:1; /* Byte 1 Bit 5 */
|
|
bool irq_ch15:1; /* Byte 1 Bit 6 */
|
|
unsigned char:1; /* Byte 1 Bit 7 */
|
|
unsigned char id:4; /* Byte 2 Bits 0-3 */
|
|
unsigned char:4; /* Byte 2 Bits 4-7 */
|
|
};
|
|
|
|
/*
|
|
Define the Inquire Setup Information reply structure.
|
|
*/
|
|
|
|
struct blogic_syncval {
|
|
unsigned char offset:4; /* Bits 0-3 */
|
|
unsigned char tx_period:3; /* Bits 4-6 */
|
|
bool sync:1; /* Bit 7 */
|
|
};
|
|
|
|
struct blogic_setup_info {
|
|
bool sync:1; /* Byte 0 Bit 0 */
|
|
bool parity:1; /* Byte 0 Bit 1 */
|
|
unsigned char:6; /* Byte 0 Bits 2-7 */
|
|
unsigned char tx_rate; /* Byte 1 */
|
|
unsigned char preempt_time; /* Byte 2 */
|
|
unsigned char timeoff_bus; /* Byte 3 */
|
|
unsigned char mbox_count; /* Byte 4 */
|
|
unsigned char mbox_addr[3]; /* Bytes 5-7 */
|
|
struct blogic_syncval sync0to7[8]; /* Bytes 8-15 */
|
|
unsigned char disconnect_ok0to7; /* Byte 16 */
|
|
unsigned char sig; /* Byte 17 */
|
|
unsigned char char_d; /* Byte 18 */
|
|
unsigned char bus_type; /* Byte 19 */
|
|
unsigned char wide_tx_ok0to7; /* Byte 20 */
|
|
unsigned char wide_tx_active0to7; /* Byte 21 */
|
|
struct blogic_syncval sync8to15[8]; /* Bytes 22-29 */
|
|
unsigned char disconnect_ok8to15; /* Byte 30 */
|
|
unsigned char:8; /* Byte 31 */
|
|
unsigned char wide_tx_ok8to15; /* Byte 32 */
|
|
unsigned char wide_tx_active8to15; /* Byte 33 */
|
|
};
|
|
|
|
/*
|
|
Define the Initialize Extended Mailbox request structure.
|
|
*/
|
|
|
|
struct blogic_extmbox_req {
|
|
unsigned char mbox_count; /* Byte 0 */
|
|
u32 base_mbox_addr; /* Bytes 1-4 */
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the Inquire PCI Host Adapter Information reply type. The ISA
|
|
Compatible I/O Port values are defined here and are also used with
|
|
the Modify I/O Address command.
|
|
*/
|
|
|
|
enum blogic_isa_ioport {
|
|
BLOGIC_IO_330 = 0,
|
|
BLOGIC_IO_334 = 1,
|
|
BLOGIC_IO_230 = 2,
|
|
BLOGIC_IO_234 = 3,
|
|
BLOGIC_IO_130 = 4,
|
|
BLOGIC_IO_134 = 5,
|
|
BLOGIC_IO_DISABLE = 6,
|
|
BLOGIC_IO_DISABLE2 = 7
|
|
} PACKED;
|
|
|
|
struct blogic_adapter_info {
|
|
enum blogic_isa_ioport isa_port; /* Byte 0 */
|
|
unsigned char irq_ch; /* Byte 1 */
|
|
bool low_term:1; /* Byte 2 Bit 0 */
|
|
bool high_term:1; /* Byte 2 Bit 1 */
|
|
unsigned char:2; /* Byte 2 Bits 2-3 */
|
|
bool JP1:1; /* Byte 2 Bit 4 */
|
|
bool JP2:1; /* Byte 2 Bit 5 */
|
|
bool JP3:1; /* Byte 2 Bit 6 */
|
|
bool genericinfo_valid:1; /* Byte 2 Bit 7 */
|
|
unsigned char:8; /* Byte 3 */
|
|
};
|
|
|
|
/*
|
|
Define the Inquire Extended Setup Information reply structure.
|
|
*/
|
|
|
|
struct blogic_ext_setup {
|
|
unsigned char bus_type; /* Byte 0 */
|
|
unsigned char bios_addr; /* Byte 1 */
|
|
unsigned short sg_limit; /* Bytes 2-3 */
|
|
unsigned char mbox_count; /* Byte 4 */
|
|
u32 base_mbox_addr; /* Bytes 5-8 */
|
|
struct {
|
|
unsigned char:2; /* Byte 9 Bits 0-1 */
|
|
bool fast_on_eisa:1; /* Byte 9 Bit 2 */
|
|
unsigned char:3; /* Byte 9 Bits 3-5 */
|
|
bool level_int:1; /* Byte 9 Bit 6 */
|
|
unsigned char:1; /* Byte 9 Bit 7 */
|
|
} misc;
|
|
unsigned char fw_rev[3]; /* Bytes 10-12 */
|
|
bool wide:1; /* Byte 13 Bit 0 */
|
|
bool differential:1; /* Byte 13 Bit 1 */
|
|
bool scam:1; /* Byte 13 Bit 2 */
|
|
bool ultra:1; /* Byte 13 Bit 3 */
|
|
bool smart_term:1; /* Byte 13 Bit 4 */
|
|
unsigned char:3; /* Byte 13 Bits 5-7 */
|
|
} PACKED;
|
|
|
|
/*
|
|
Define the Enable Strict Round Robin Mode request type.
|
|
*/
|
|
|
|
enum blogic_rr_req {
|
|
BLOGIC_AGGRESSIVE_RR = 0,
|
|
BLOGIC_STRICT_RR_MODE = 1
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the Fetch Host Adapter Local RAM request type.
|
|
*/
|
|
|
|
#define BLOGIC_BIOS_BASE 0
|
|
#define BLOGIC_AUTOSCSI_BASE 64
|
|
|
|
struct blogic_fetch_localram {
|
|
unsigned char offset; /* Byte 0 */
|
|
unsigned char count; /* Byte 1 */
|
|
};
|
|
|
|
/*
|
|
Define the Host Adapter Local RAM AutoSCSI structure.
|
|
*/
|
|
|
|
struct blogic_autoscsi {
|
|
unsigned char factory_sig[2]; /* Bytes 0-1 */
|
|
unsigned char info_bytes; /* Byte 2 */
|
|
unsigned char adapter_type[6]; /* Bytes 3-8 */
|
|
unsigned char:8; /* Byte 9 */
|
|
bool floppy:1; /* Byte 10 Bit 0 */
|
|
bool floppy_sec:1; /* Byte 10 Bit 1 */
|
|
bool level_int:1; /* Byte 10 Bit 2 */
|
|
unsigned char:2; /* Byte 10 Bits 3-4 */
|
|
unsigned char systemram_bios:3; /* Byte 10 Bits 5-7 */
|
|
unsigned char dma_ch:7; /* Byte 11 Bits 0-6 */
|
|
bool dma_autoconf:1; /* Byte 11 Bit 7 */
|
|
unsigned char irq_ch:7; /* Byte 12 Bits 0-6 */
|
|
bool irq_autoconf:1; /* Byte 12 Bit 7 */
|
|
unsigned char dma_tx_rate; /* Byte 13 */
|
|
unsigned char scsi_id; /* Byte 14 */
|
|
bool low_term:1; /* Byte 15 Bit 0 */
|
|
bool parity:1; /* Byte 15 Bit 1 */
|
|
bool high_term:1; /* Byte 15 Bit 2 */
|
|
bool noisy_cable:1; /* Byte 15 Bit 3 */
|
|
bool fast_sync_neg:1; /* Byte 15 Bit 4 */
|
|
bool reset_enabled:1; /* Byte 15 Bit 5 */
|
|
bool:1; /* Byte 15 Bit 6 */
|
|
bool active_negation:1; /* Byte 15 Bit 7 */
|
|
unsigned char bus_on_delay; /* Byte 16 */
|
|
unsigned char bus_off_delay; /* Byte 17 */
|
|
bool bios_enabled:1; /* Byte 18 Bit 0 */
|
|
bool int19_redir_enabled:1; /* Byte 18 Bit 1 */
|
|
bool ext_trans_enable:1; /* Byte 18 Bit 2 */
|
|
bool removable_as_fixed:1; /* Byte 18 Bit 3 */
|
|
bool:1; /* Byte 18 Bit 4 */
|
|
bool morethan2_drives:1; /* Byte 18 Bit 5 */
|
|
bool bios_int:1; /* Byte 18 Bit 6 */
|
|
bool floptical:1; /* Byte 19 Bit 7 */
|
|
unsigned short dev_enabled; /* Bytes 19-20 */
|
|
unsigned short wide_ok; /* Bytes 21-22 */
|
|
unsigned short fast_ok; /* Bytes 23-24 */
|
|
unsigned short sync_ok; /* Bytes 25-26 */
|
|
unsigned short discon_ok; /* Bytes 27-28 */
|
|
unsigned short send_start_unit; /* Bytes 29-30 */
|
|
unsigned short ignore_bios_scan; /* Bytes 31-32 */
|
|
unsigned char pci_int_pin:2; /* Byte 33 Bits 0-1 */
|
|
unsigned char adapter_ioport:2; /* Byte 33 Bits 2-3 */
|
|
bool strict_rr_enabled:1; /* Byte 33 Bit 4 */
|
|
bool vesabus_33mhzplus:1; /* Byte 33 Bit 5 */
|
|
bool vesa_burst_write:1; /* Byte 33 Bit 6 */
|
|
bool vesa_burst_read:1; /* Byte 33 Bit 7 */
|
|
unsigned short ultra_ok; /* Bytes 34-35 */
|
|
unsigned int:32; /* Bytes 36-39 */
|
|
unsigned char:8; /* Byte 40 */
|
|
unsigned char autoscsi_maxlun; /* Byte 41 */
|
|
bool:1; /* Byte 42 Bit 0 */
|
|
bool scam_dominant:1; /* Byte 42 Bit 1 */
|
|
bool scam_enabled:1; /* Byte 42 Bit 2 */
|
|
bool scam_lev2:1; /* Byte 42 Bit 3 */
|
|
unsigned char:4; /* Byte 42 Bits 4-7 */
|
|
bool int13_exten:1; /* Byte 43 Bit 0 */
|
|
bool:1; /* Byte 43 Bit 1 */
|
|
bool cd_boot:1; /* Byte 43 Bit 2 */
|
|
unsigned char:5; /* Byte 43 Bits 3-7 */
|
|
unsigned char boot_id:4; /* Byte 44 Bits 0-3 */
|
|
unsigned char boot_ch:4; /* Byte 44 Bits 4-7 */
|
|
unsigned char force_scan_order:1; /* Byte 45 Bit 0 */
|
|
unsigned char:7; /* Byte 45 Bits 1-7 */
|
|
unsigned short nontagged_to_alt_ok; /* Bytes 46-47 */
|
|
unsigned short reneg_sync_on_check; /* Bytes 48-49 */
|
|
unsigned char rsvd[10]; /* Bytes 50-59 */
|
|
unsigned char manuf_diag[2]; /* Bytes 60-61 */
|
|
unsigned short cksum; /* Bytes 62-63 */
|
|
} PACKED;
|
|
|
|
/*
|
|
Define the Host Adapter Local RAM Auto SCSI Byte 45 structure.
|
|
*/
|
|
|
|
struct blogic_autoscsi_byte45 {
|
|
unsigned char force_scan_order:1; /* Bit 0 */
|
|
unsigned char:7; /* Bits 1-7 */
|
|
};
|
|
|
|
/*
|
|
Define the Host Adapter Local RAM BIOS Drive Map Byte structure.
|
|
*/
|
|
|
|
#define BLOGIC_BIOS_DRVMAP 17
|
|
|
|
struct blogic_bios_drvmap {
|
|
unsigned char tgt_idbit3:1; /* Bit 0 */
|
|
unsigned char:2; /* Bits 1-2 */
|
|
enum blogic_bios_diskgeometry diskgeom:2; /* Bits 3-4 */
|
|
unsigned char tgt_id:3; /* Bits 5-7 */
|
|
};
|
|
|
|
/*
|
|
Define the Set CCB Format request type. Extended LUN Format CCBs are
|
|
necessary to support more than 8 Logical Units per Target Device.
|
|
*/
|
|
|
|
enum blogic_setccb_fmt {
|
|
BLOGIC_LEGACY_LUN_CCB = 0,
|
|
BLOGIC_EXT_LUN_CCB = 1
|
|
} PACKED;
|
|
|
|
/*
|
|
Define the Outgoing Mailbox Action Codes.
|
|
*/
|
|
|
|
enum blogic_action {
|
|
BLOGIC_OUTBOX_FREE = 0x00,
|
|
BLOGIC_MBOX_START = 0x01,
|
|
BLOGIC_MBOX_ABORT = 0x02
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the Incoming Mailbox Completion Codes. The MultiMaster Firmware
|
|
only uses codes 0 - 4. The FlashPoint SCCB Manager has no mailboxes, so
|
|
completion codes are stored in the CCB; it only uses codes 1, 2, 4, and 5.
|
|
*/
|
|
|
|
enum blogic_cmplt_code {
|
|
BLOGIC_INBOX_FREE = 0x00,
|
|
BLOGIC_CMD_COMPLETE_GOOD = 0x01,
|
|
BLOGIC_CMD_ABORT_BY_HOST = 0x02,
|
|
BLOGIC_CMD_NOTFOUND = 0x03,
|
|
BLOGIC_CMD_COMPLETE_ERROR = 0x04,
|
|
BLOGIC_INVALID_CCB = 0x05
|
|
} PACKED;
|
|
|
|
/*
|
|
Define the Command Control Block (CCB) Opcodes.
|
|
*/
|
|
|
|
enum blogic_ccb_opcode {
|
|
BLOGIC_INITIATOR_CCB = 0x00,
|
|
BLOGIC_TGT_CCB = 0x01,
|
|
BLOGIC_INITIATOR_CCB_SG = 0x02,
|
|
BLOGIC_INITIATOR_CCBB_RESIDUAL = 0x03,
|
|
BLOGIC_INITIATOR_CCB_SG_RESIDUAL = 0x04,
|
|
BLOGIC_BDR = 0x81
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the CCB Data Direction Codes.
|
|
*/
|
|
|
|
enum blogic_datadir {
|
|
BLOGIC_UNCHECKED_TX = 0,
|
|
BLOGIC_DATAIN_CHECKED = 1,
|
|
BLOGIC_DATAOUT_CHECKED = 2,
|
|
BLOGIC_NOTX = 3
|
|
};
|
|
|
|
|
|
/*
|
|
Define the Host Adapter Status Codes. The MultiMaster Firmware does not
|
|
return status code 0x0C; it uses 0x12 for both overruns and underruns.
|
|
*/
|
|
|
|
enum blogic_adapter_status {
|
|
BLOGIC_CMD_CMPLT_NORMAL = 0x00,
|
|
BLOGIC_LINK_CMD_CMPLT = 0x0A,
|
|
BLOGIC_LINK_CMD_CMPLT_FLAG = 0x0B,
|
|
BLOGIC_DATA_UNDERRUN = 0x0C,
|
|
BLOGIC_SELECT_TIMEOUT = 0x11,
|
|
BLOGIC_DATA_OVERRUN = 0x12,
|
|
BLOGIC_NOEXPECT_BUSFREE = 0x13,
|
|
BLOGIC_INVALID_BUSPHASE = 0x14,
|
|
BLOGIC_INVALID_OUTBOX_CODE = 0x15,
|
|
BLOGIC_INVALID_CMD_CODE = 0x16,
|
|
BLOGIC_LINKCCB_BADLUN = 0x17,
|
|
BLOGIC_BAD_CMD_PARAM = 0x1A,
|
|
BLOGIC_AUTOREQSENSE_FAIL = 0x1B,
|
|
BLOGIC_TAGQUEUE_REJECT = 0x1C,
|
|
BLOGIC_BAD_MSG_RCVD = 0x1D,
|
|
BLOGIC_HW_FAIL = 0x20,
|
|
BLOGIC_NORESPONSE_TO_ATN = 0x21,
|
|
BLOGIC_HW_RESET = 0x22,
|
|
BLOGIC_RST_FROM_OTHERDEV = 0x23,
|
|
BLOGIC_BAD_RECONNECT = 0x24,
|
|
BLOGIC_HW_BDR = 0x25,
|
|
BLOGIC_ABRT_QUEUE = 0x26,
|
|
BLOGIC_ADAPTER_SW_ERROR = 0x27,
|
|
BLOGIC_HW_TIMEOUT = 0x30,
|
|
BLOGIC_PARITY_ERR = 0x34
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the SCSI Target Device Status Codes.
|
|
*/
|
|
|
|
enum blogic_tgt_status {
|
|
BLOGIC_OP_GOOD = 0x00,
|
|
BLOGIC_CHECKCONDITION = 0x02,
|
|
BLOGIC_DEVBUSY = 0x08
|
|
} PACKED;
|
|
|
|
/*
|
|
Define the Queue Tag Codes.
|
|
*/
|
|
|
|
enum blogic_queuetag {
|
|
BLOGIC_SIMPLETAG = 0,
|
|
BLOGIC_HEADTAG = 1,
|
|
BLOGIC_ORDEREDTAG = 2,
|
|
BLOGIC_RSVDTAG = 3
|
|
};
|
|
|
|
/*
|
|
Define the SCSI Command Descriptor Block (CDB).
|
|
*/
|
|
|
|
#define BLOGIC_CDB_MAXLEN 12
|
|
|
|
|
|
/*
|
|
Define the Scatter/Gather Segment structure required by the MultiMaster
|
|
Firmware Interface and the FlashPoint SCCB Manager.
|
|
*/
|
|
|
|
struct blogic_sg_seg {
|
|
u32 segbytes; /* Bytes 0-3 */
|
|
u32 segdata; /* Bytes 4-7 */
|
|
};
|
|
|
|
/*
|
|
Define the Driver CCB Status Codes.
|
|
*/
|
|
|
|
enum blogic_ccb_status {
|
|
BLOGIC_CCB_FREE = 0,
|
|
BLOGIC_CCB_ACTIVE = 1,
|
|
BLOGIC_CCB_COMPLETE = 2,
|
|
BLOGIC_CCB_RESET = 3
|
|
} PACKED;
|
|
|
|
|
|
/*
|
|
Define the 32 Bit Mode Command Control Block (CCB) structure. The first 40
|
|
bytes are defined by and common to both the MultiMaster Firmware and the
|
|
FlashPoint SCCB Manager. The next 60 bytes are defined by the FlashPoint
|
|
SCCB Manager. The remaining components are defined by the Linux BusLogic
|
|
Driver. Extended LUN Format CCBs differ from Legacy LUN Format 32 Bit Mode
|
|
CCBs only in having the TagEnable and QueueTag fields moved from byte 17 to
|
|
byte 1, and the Logical Unit field in byte 17 expanded to 6 bits. In theory,
|
|
Extended LUN Format CCBs can support up to 64 Logical Units, but in practice
|
|
many devices will respond improperly to Logical Units between 32 and 63, and
|
|
the SCSI-2 specification defines Bit 5 as LUNTAR. Extended LUN Format CCBs
|
|
are used by recent versions of the MultiMaster Firmware, as well as by the
|
|
FlashPoint SCCB Manager; the FlashPoint SCCB Manager only supports 32 Logical
|
|
Units. Since 64 Logical Units are unlikely to be needed in practice, and
|
|
since they are problematic for the above reasons, and since limiting them to
|
|
5 bits simplifies the CCB structure definition, this driver only supports
|
|
32 Logical Units per Target Device.
|
|
*/
|
|
|
|
struct blogic_ccb {
|
|
/*
|
|
MultiMaster Firmware and FlashPoint SCCB Manager Common Portion.
|
|
*/
|
|
enum blogic_ccb_opcode opcode; /* Byte 0 */
|
|
unsigned char:3; /* Byte 1 Bits 0-2 */
|
|
enum blogic_datadir datadir:2; /* Byte 1 Bits 3-4 */
|
|
bool tag_enable:1; /* Byte 1 Bit 5 */
|
|
enum blogic_queuetag queuetag:2; /* Byte 1 Bits 6-7 */
|
|
unsigned char cdblen; /* Byte 2 */
|
|
unsigned char sense_datalen; /* Byte 3 */
|
|
u32 datalen; /* Bytes 4-7 */
|
|
void *data; /* Bytes 8-11 */
|
|
unsigned char:8; /* Byte 12 */
|
|
unsigned char:8; /* Byte 13 */
|
|
enum blogic_adapter_status adapter_status; /* Byte 14 */
|
|
enum blogic_tgt_status tgt_status; /* Byte 15 */
|
|
unsigned char tgt_id; /* Byte 16 */
|
|
unsigned char lun:5; /* Byte 17 Bits 0-4 */
|
|
bool legacytag_enable:1; /* Byte 17 Bit 5 */
|
|
enum blogic_queuetag legacy_tag:2; /* Byte 17 Bits 6-7 */
|
|
unsigned char cdb[BLOGIC_CDB_MAXLEN]; /* Bytes 18-29 */
|
|
unsigned char:8; /* Byte 30 */
|
|
unsigned char:8; /* Byte 31 */
|
|
u32 rsvd_int; /* Bytes 32-35 */
|
|
u32 sensedata; /* Bytes 36-39 */
|
|
/*
|
|
FlashPoint SCCB Manager Defined Portion.
|
|
*/
|
|
void (*callback) (struct blogic_ccb *); /* Bytes 40-43 */
|
|
u32 base_addr; /* Bytes 44-47 */
|
|
enum blogic_cmplt_code comp_code; /* Byte 48 */
|
|
#ifdef CONFIG_SCSI_FLASHPOINT
|
|
unsigned char:8; /* Byte 49 */
|
|
u16 os_flags; /* Bytes 50-51 */
|
|
unsigned char private[24]; /* Bytes 52-99 */
|
|
void *rsvd1;
|
|
void *rsvd2;
|
|
unsigned char private2[16];
|
|
#endif
|
|
/*
|
|
BusLogic Linux Driver Defined Portion.
|
|
*/
|
|
dma_addr_t allocgrp_head;
|
|
unsigned int allocgrp_size;
|
|
u32 dma_handle;
|
|
enum blogic_ccb_status status;
|
|
unsigned long serial;
|
|
struct scsi_cmnd *command;
|
|
struct blogic_adapter *adapter;
|
|
struct blogic_ccb *next;
|
|
struct blogic_ccb *next_all;
|
|
struct blogic_sg_seg sglist[BLOGIC_SG_LIMIT];
|
|
};
|
|
|
|
/*
|
|
Define the 32 Bit Mode Outgoing Mailbox structure.
|
|
*/
|
|
|
|
struct blogic_outbox {
|
|
u32 ccb; /* Bytes 0-3 */
|
|
u32:24; /* Bytes 4-6 */
|
|
enum blogic_action action; /* Byte 7 */
|
|
};
|
|
|
|
/*
|
|
Define the 32 Bit Mode Incoming Mailbox structure.
|
|
*/
|
|
|
|
struct blogic_inbox {
|
|
u32 ccb; /* Bytes 0-3 */
|
|
enum blogic_adapter_status adapter_status; /* Byte 4 */
|
|
enum blogic_tgt_status tgt_status; /* Byte 5 */
|
|
unsigned char:8; /* Byte 6 */
|
|
enum blogic_cmplt_code comp_code; /* Byte 7 */
|
|
};
|
|
|
|
|
|
/*
|
|
Define the BusLogic Driver Options structure.
|
|
*/
|
|
|
|
struct blogic_drvr_options {
|
|
unsigned short tagq_ok;
|
|
unsigned short tagq_ok_mask;
|
|
unsigned short bus_settle_time;
|
|
unsigned short stop_tgt_inquiry;
|
|
unsigned char common_qdepth;
|
|
unsigned char qdepth[BLOGIC_MAXDEV];
|
|
};
|
|
|
|
/*
|
|
Define the Host Adapter Target Flags structure.
|
|
*/
|
|
|
|
struct blogic_tgt_flags {
|
|
bool tgt_exists:1;
|
|
bool tagq_ok:1;
|
|
bool wide_ok:1;
|
|
bool tagq_active:1;
|
|
bool wide_active:1;
|
|
bool cmd_good:1;
|
|
bool tgt_info_in:1;
|
|
};
|
|
|
|
/*
|
|
Define the Host Adapter Target Statistics structure.
|
|
*/
|
|
|
|
#define BLOGIC_SZ_BUCKETS 10
|
|
|
|
struct blogic_tgt_stats {
|
|
unsigned int cmds_tried;
|
|
unsigned int cmds_complete;
|
|
unsigned int read_cmds;
|
|
unsigned int write_cmds;
|
|
struct blogic_byte_count bytesread;
|
|
struct blogic_byte_count byteswritten;
|
|
unsigned int read_sz_buckets[BLOGIC_SZ_BUCKETS];
|
|
unsigned int write_sz_buckets[BLOGIC_SZ_BUCKETS];
|
|
unsigned short aborts_request;
|
|
unsigned short aborts_tried;
|
|
unsigned short aborts_done;
|
|
unsigned short bdr_request;
|
|
unsigned short bdr_tried;
|
|
unsigned short bdr_done;
|
|
unsigned short adatper_reset_req;
|
|
unsigned short adapter_reset_attempt;
|
|
unsigned short adapter_reset_done;
|
|
};
|
|
|
|
/*
|
|
Define the FlashPoint Card Handle data type.
|
|
*/
|
|
|
|
#define FPOINT_BADCARD_HANDLE 0xFFFFFFFFL
|
|
|
|
|
|
/*
|
|
Define the FlashPoint Information structure. This structure is defined
|
|
by the FlashPoint SCCB Manager.
|
|
*/
|
|
|
|
struct fpoint_info {
|
|
u32 base_addr; /* Bytes 0-3 */
|
|
bool present; /* Byte 4 */
|
|
unsigned char irq_ch; /* Byte 5 */
|
|
unsigned char scsi_id; /* Byte 6 */
|
|
unsigned char scsi_lun; /* Byte 7 */
|
|
u16 fw_rev; /* Bytes 8-9 */
|
|
u16 sync_ok; /* Bytes 10-11 */
|
|
u16 fast_ok; /* Bytes 12-13 */
|
|
u16 ultra_ok; /* Bytes 14-15 */
|
|
u16 discon_ok; /* Bytes 16-17 */
|
|
u16 wide_ok; /* Bytes 18-19 */
|
|
bool parity:1; /* Byte 20 Bit 0 */
|
|
bool wide:1; /* Byte 20 Bit 1 */
|
|
bool softreset:1; /* Byte 20 Bit 2 */
|
|
bool ext_trans_enable:1; /* Byte 20 Bit 3 */
|
|
bool low_term:1; /* Byte 20 Bit 4 */
|
|
bool high_term:1; /* Byte 20 Bit 5 */
|
|
bool report_underrun:1; /* Byte 20 Bit 6 */
|
|
bool scam_enabled:1; /* Byte 20 Bit 7 */
|
|
bool scam_lev2:1; /* Byte 21 Bit 0 */
|
|
unsigned char:7; /* Byte 21 Bits 1-7 */
|
|
unsigned char family; /* Byte 22 */
|
|
unsigned char bus_type; /* Byte 23 */
|
|
unsigned char model[3]; /* Bytes 24-26 */
|
|
unsigned char relative_cardnum; /* Byte 27 */
|
|
unsigned char rsvd[4]; /* Bytes 28-31 */
|
|
u32 os_rsvd; /* Bytes 32-35 */
|
|
unsigned char translation_info[4]; /* Bytes 36-39 */
|
|
u32 rsvd2[5]; /* Bytes 40-59 */
|
|
u32 sec_range; /* Bytes 60-63 */
|
|
};
|
|
|
|
/*
|
|
Define the BusLogic Driver Host Adapter structure.
|
|
*/
|
|
|
|
struct blogic_adapter {
|
|
struct Scsi_Host *scsi_host;
|
|
struct pci_dev *pci_device;
|
|
enum blogic_adapter_type adapter_type;
|
|
enum blogic_adapter_bus_type adapter_bus_type;
|
|
unsigned long io_addr;
|
|
unsigned long pci_addr;
|
|
unsigned short addr_count;
|
|
unsigned char host_no;
|
|
unsigned char model[9];
|
|
unsigned char fw_ver[6];
|
|
unsigned char full_model[18];
|
|
unsigned char bus;
|
|
unsigned char dev;
|
|
unsigned char irq_ch;
|
|
unsigned char dma_ch;
|
|
unsigned char scsi_id;
|
|
bool irq_acquired:1;
|
|
bool dma_chan_acquired:1;
|
|
bool ext_trans_enable:1;
|
|
bool parity:1;
|
|
bool reset_enabled:1;
|
|
bool level_int:1;
|
|
bool wide:1;
|
|
bool differential:1;
|
|
bool scam:1;
|
|
bool ultra:1;
|
|
bool ext_lun:1;
|
|
bool terminfo_valid:1;
|
|
bool low_term:1;
|
|
bool high_term:1;
|
|
bool need_bouncebuf:1;
|
|
bool strict_rr:1;
|
|
bool scam_enabled:1;
|
|
bool scam_lev2:1;
|
|
bool adapter_initd:1;
|
|
bool adapter_extreset:1;
|
|
bool adapter_intern_err:1;
|
|
bool processing_ccbs;
|
|
volatile bool adapter_cmd_complete;
|
|
unsigned short adapter_sglimit;
|
|
unsigned short drvr_sglimit;
|
|
unsigned short maxdev;
|
|
unsigned short maxlun;
|
|
unsigned short mbox_count;
|
|
unsigned short initccbs;
|
|
unsigned short inc_ccbs;
|
|
unsigned short alloc_ccbs;
|
|
unsigned short drvr_qdepth;
|
|
unsigned short adapter_qdepth;
|
|
unsigned short untag_qdepth;
|
|
unsigned short common_qdepth;
|
|
unsigned short bus_settle_time;
|
|
unsigned short sync_ok;
|
|
unsigned short fast_ok;
|
|
unsigned short ultra_ok;
|
|
unsigned short wide_ok;
|
|
unsigned short discon_ok;
|
|
unsigned short tagq_ok;
|
|
unsigned short ext_resets;
|
|
unsigned short adapter_intern_errors;
|
|
unsigned short tgt_count;
|
|
unsigned short msgbuflen;
|
|
u32 bios_addr;
|
|
struct blogic_drvr_options *drvr_opts;
|
|
struct fpoint_info fpinfo;
|
|
void *cardhandle;
|
|
struct list_head host_list;
|
|
struct blogic_ccb *all_ccbs;
|
|
struct blogic_ccb *free_ccbs;
|
|
struct blogic_ccb *firstccb;
|
|
struct blogic_ccb *lastccb;
|
|
struct blogic_ccb *bdr_pend[BLOGIC_MAXDEV];
|
|
struct blogic_tgt_flags tgt_flags[BLOGIC_MAXDEV];
|
|
unsigned char qdepth[BLOGIC_MAXDEV];
|
|
unsigned char sync_period[BLOGIC_MAXDEV];
|
|
unsigned char sync_offset[BLOGIC_MAXDEV];
|
|
unsigned char active_cmds[BLOGIC_MAXDEV];
|
|
unsigned int cmds_since_rst[BLOGIC_MAXDEV];
|
|
unsigned long last_seqpoint[BLOGIC_MAXDEV];
|
|
unsigned long last_resettried[BLOGIC_MAXDEV];
|
|
unsigned long last_resetdone[BLOGIC_MAXDEV];
|
|
struct blogic_outbox *first_outbox;
|
|
struct blogic_outbox *last_outbox;
|
|
struct blogic_outbox *next_outbox;
|
|
struct blogic_inbox *first_inbox;
|
|
struct blogic_inbox *last_inbox;
|
|
struct blogic_inbox *next_inbox;
|
|
struct blogic_tgt_stats tgt_stats[BLOGIC_MAXDEV];
|
|
unsigned char *mbox_space;
|
|
dma_addr_t mbox_space_handle;
|
|
unsigned int mbox_sz;
|
|
unsigned long ccb_offset;
|
|
char msgbuf[BLOGIC_MSGBUF_SIZE];
|
|
};
|
|
|
|
/*
|
|
Define a structure for the BIOS Disk Parameters.
|
|
*/
|
|
|
|
struct bios_diskparam {
|
|
int heads;
|
|
int sectors;
|
|
int cylinders;
|
|
};
|
|
|
|
/*
|
|
Define a structure for the SCSI Inquiry command results.
|
|
*/
|
|
|
|
struct scsi_inquiry {
|
|
unsigned char devtype:5; /* Byte 0 Bits 0-4 */
|
|
unsigned char dev_qual:3; /* Byte 0 Bits 5-7 */
|
|
unsigned char dev_modifier:7; /* Byte 1 Bits 0-6 */
|
|
bool rmb:1; /* Byte 1 Bit 7 */
|
|
unsigned char ansi_ver:3; /* Byte 2 Bits 0-2 */
|
|
unsigned char ecma_ver:3; /* Byte 2 Bits 3-5 */
|
|
unsigned char iso_ver:2; /* Byte 2 Bits 6-7 */
|
|
unsigned char resp_fmt:4; /* Byte 3 Bits 0-3 */
|
|
unsigned char:2; /* Byte 3 Bits 4-5 */
|
|
bool TrmIOP:1; /* Byte 3 Bit 6 */
|
|
bool AENC:1; /* Byte 3 Bit 7 */
|
|
unsigned char addl_len; /* Byte 4 */
|
|
unsigned char:8; /* Byte 5 */
|
|
unsigned char:8; /* Byte 6 */
|
|
bool SftRe:1; /* Byte 7 Bit 0 */
|
|
bool CmdQue:1; /* Byte 7 Bit 1 */
|
|
bool:1; /* Byte 7 Bit 2 */
|
|
bool linked:1; /* Byte 7 Bit 3 */
|
|
bool sync:1; /* Byte 7 Bit 4 */
|
|
bool WBus16:1; /* Byte 7 Bit 5 */
|
|
bool WBus32:1; /* Byte 7 Bit 6 */
|
|
bool RelAdr:1; /* Byte 7 Bit 7 */
|
|
unsigned char vendor[8]; /* Bytes 8-15 */
|
|
unsigned char product[16]; /* Bytes 16-31 */
|
|
unsigned char product_rev[4]; /* Bytes 32-35 */
|
|
};
|
|
|
|
|
|
/*
|
|
Define functions to provide an abstraction for reading and writing the
|
|
Host Adapter I/O Registers.
|
|
*/
|
|
|
|
static inline void blogic_busreset(struct blogic_adapter *adapter)
|
|
{
|
|
union blogic_cntrl_reg cr;
|
|
cr.all = 0;
|
|
cr.cr.bus_reset = true;
|
|
outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
|
|
}
|
|
|
|
static inline void blogic_intreset(struct blogic_adapter *adapter)
|
|
{
|
|
union blogic_cntrl_reg cr;
|
|
cr.all = 0;
|
|
cr.cr.int_reset = true;
|
|
outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
|
|
}
|
|
|
|
static inline void blogic_softreset(struct blogic_adapter *adapter)
|
|
{
|
|
union blogic_cntrl_reg cr;
|
|
cr.all = 0;
|
|
cr.cr.soft_reset = true;
|
|
outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
|
|
}
|
|
|
|
static inline void blogic_hardreset(struct blogic_adapter *adapter)
|
|
{
|
|
union blogic_cntrl_reg cr;
|
|
cr.all = 0;
|
|
cr.cr.hard_reset = true;
|
|
outb(cr.all, adapter->io_addr + BLOGIC_CNTRL_REG);
|
|
}
|
|
|
|
static inline unsigned char blogic_rdstatus(struct blogic_adapter *adapter)
|
|
{
|
|
return inb(adapter->io_addr + BLOGIC_STATUS_REG);
|
|
}
|
|
|
|
static inline void blogic_setcmdparam(struct blogic_adapter *adapter,
|
|
unsigned char value)
|
|
{
|
|
outb(value, adapter->io_addr + BLOGIC_CMD_PARM_REG);
|
|
}
|
|
|
|
static inline unsigned char blogic_rddatain(struct blogic_adapter *adapter)
|
|
{
|
|
return inb(adapter->io_addr + BLOGIC_DATAIN_REG);
|
|
}
|
|
|
|
static inline unsigned char blogic_rdint(struct blogic_adapter *adapter)
|
|
{
|
|
return inb(adapter->io_addr + BLOGIC_INT_REG);
|
|
}
|
|
|
|
static inline unsigned char blogic_rdgeom(struct blogic_adapter *adapter)
|
|
{
|
|
return inb(adapter->io_addr + BLOGIC_GEOMETRY_REG);
|
|
}
|
|
|
|
/*
|
|
blogic_execmbox issues an Execute Mailbox Command, which
|
|
notifies the Host Adapter that an entry has been made in an Outgoing
|
|
Mailbox.
|
|
*/
|
|
|
|
static inline void blogic_execmbox(struct blogic_adapter *adapter)
|
|
{
|
|
blogic_setcmdparam(adapter, BLOGIC_EXEC_MBOX_CMD);
|
|
}
|
|
|
|
/*
|
|
blogic_delay waits for Seconds to elapse.
|
|
*/
|
|
|
|
static inline void blogic_delay(int seconds)
|
|
{
|
|
mdelay(1000 * seconds);
|
|
}
|
|
|
|
/*
|
|
virt_to_32bit_virt maps between Kernel Virtual Addresses and
|
|
32 bit Kernel Virtual Addresses. This avoids compilation warnings
|
|
on 64 bit architectures.
|
|
*/
|
|
|
|
static inline u32 virt_to_32bit_virt(void *virt_addr)
|
|
{
|
|
return (u32) (unsigned long) virt_addr;
|
|
}
|
|
|
|
/*
|
|
blogic_inc_count increments counter by 1, stopping at
|
|
65535 rather than wrapping around to 0.
|
|
*/
|
|
|
|
static inline void blogic_inc_count(unsigned short *count)
|
|
{
|
|
if (*count < 65535)
|
|
(*count)++;
|
|
}
|
|
|
|
/*
|
|
blogic_addcount increments Byte Counter by Amount.
|
|
*/
|
|
|
|
static inline void blogic_addcount(struct blogic_byte_count *bytecount,
|
|
unsigned int amount)
|
|
{
|
|
bytecount->units += amount;
|
|
if (bytecount->units > 999999999) {
|
|
bytecount->units -= 1000000000;
|
|
bytecount->billions++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
blogic_incszbucket increments the Bucket for Amount.
|
|
*/
|
|
|
|
static inline void blogic_incszbucket(unsigned int *cmdsz_buckets,
|
|
unsigned int amount)
|
|
{
|
|
int index = 0;
|
|
if (amount < 8 * 1024) {
|
|
if (amount < 2 * 1024)
|
|
index = (amount < 1 * 1024 ? 0 : 1);
|
|
else
|
|
index = (amount < 4 * 1024 ? 2 : 3);
|
|
} else if (amount < 128 * 1024) {
|
|
if (amount < 32 * 1024)
|
|
index = (amount < 16 * 1024 ? 4 : 5);
|
|
else
|
|
index = (amount < 64 * 1024 ? 6 : 7);
|
|
} else
|
|
index = (amount < 256 * 1024 ? 8 : 9);
|
|
cmdsz_buckets[index]++;
|
|
}
|
|
|
|
/*
|
|
Define the version number of the FlashPoint Firmware (SCCB Manager).
|
|
*/
|
|
|
|
#define FLASHPOINT_FW_VER "5.02"
|
|
|
|
/*
|
|
Define the possible return values from FlashPoint_HandleInterrupt.
|
|
*/
|
|
|
|
#define FPOINT_NORMAL_INT 0x00
|
|
#define FPOINT_INTERN_ERR 0xFE
|
|
#define FPOINT_EXT_RESET 0xFF
|
|
|
|
/*
|
|
Define prototypes for the forward referenced BusLogic Driver
|
|
Internal Functions.
|
|
*/
|
|
|
|
static const char *blogic_drvr_info(struct Scsi_Host *);
|
|
static int blogic_qcmd(struct Scsi_Host *h, struct scsi_cmnd *);
|
|
static int blogic_diskparam(struct scsi_device *, struct block_device *, sector_t, int *);
|
|
static int blogic_slaveconfig(struct scsi_device *);
|
|
static void blogic_qcompleted_ccb(struct blogic_ccb *);
|
|
static irqreturn_t blogic_inthandler(int, void *);
|
|
static int blogic_resetadapter(struct blogic_adapter *, bool hard_reset);
|
|
static void blogic_msg(enum blogic_msglevel, char *, struct blogic_adapter *, ...);
|
|
static int __init blogic_setup(char *);
|
|
|
|
#endif /* _BUSLOGIC_H */
|