mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Thomas Gleixner](/assets/img/avatar_default.png)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
975 lines
23 KiB
C
975 lines
23 KiB
C
/*
|
|
* linux/drivers/mmc/at91_mci.c - ATMEL AT91RM9200 MCI Driver
|
|
*
|
|
* Copyright (C) 2005 Cougar Creek Computing Devices Ltd, All Rights Reserved
|
|
*
|
|
* Copyright (C) 2006 Malcolm Noyes
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/*
|
|
This is the AT91RM9200 MCI driver that has been tested with both MMC cards
|
|
and SD-cards. Boards that support write protect are now supported.
|
|
The CCAT91SBC001 board does not support SD cards.
|
|
|
|
The three entry points are at91_mci_request, at91_mci_set_ios
|
|
and at91_mci_get_ro.
|
|
|
|
SET IOS
|
|
This configures the device to put it into the correct mode and clock speed
|
|
required.
|
|
|
|
MCI REQUEST
|
|
MCI request processes the commands sent in the mmc_request structure. This
|
|
can consist of a processing command and a stop command in the case of
|
|
multiple block transfers.
|
|
|
|
There are three main types of request, commands, reads and writes.
|
|
|
|
Commands are straight forward. The command is submitted to the controller and
|
|
the request function returns. When the controller generates an interrupt to indicate
|
|
the command is finished, the response to the command are read and the mmc_request_done
|
|
function called to end the request.
|
|
|
|
Reads and writes work in a similar manner to normal commands but involve the PDC (DMA)
|
|
controller to manage the transfers.
|
|
|
|
A read is done from the controller directly to the scatterlist passed in from the request.
|
|
Due to a bug in the controller, when a read is completed, all the words are byte
|
|
swapped in the scatterlist buffers.
|
|
|
|
The sequence of read interrupts is: ENDRX, RXBUFF, CMDRDY
|
|
|
|
A write is slightly different in that the bytes to write are read from the scatterlist
|
|
into a dma memory buffer (this is in case the source buffer should be read only). The
|
|
entire write buffer is then done from this single dma memory buffer.
|
|
|
|
The sequence of write interrupts is: ENDTX, TXBUFE, NOTBUSY, CMDRDY
|
|
|
|
GET RO
|
|
Gets the status of the write protect pin, if available.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/protocol.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach/mmc.h>
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/at91rm9200_mci.h>
|
|
#include <asm/arch/at91rm9200_pdc.h>
|
|
|
|
#define DRIVER_NAME "at91_mci"
|
|
|
|
#undef SUPPORT_4WIRE
|
|
|
|
static struct clk *mci_clk;
|
|
|
|
#define FL_SENT_COMMAND (1 << 0)
|
|
#define FL_SENT_STOP (1 << 1)
|
|
|
|
|
|
|
|
/*
|
|
* Read from a MCI register.
|
|
*/
|
|
static inline unsigned long at91_mci_read(unsigned int reg)
|
|
{
|
|
void __iomem *mci_base = (void __iomem *)AT91_VA_BASE_MCI;
|
|
|
|
return __raw_readl(mci_base + reg);
|
|
}
|
|
|
|
/*
|
|
* Write to a MCI register.
|
|
*/
|
|
static inline void at91_mci_write(unsigned int reg, unsigned long value)
|
|
{
|
|
void __iomem *mci_base = (void __iomem *)AT91_VA_BASE_MCI;
|
|
|
|
__raw_writel(value, mci_base + reg);
|
|
}
|
|
|
|
/*
|
|
* Low level type for this driver
|
|
*/
|
|
struct at91mci_host
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct mmc_command *cmd;
|
|
struct mmc_request *request;
|
|
|
|
struct at91_mmc_data *board;
|
|
int present;
|
|
|
|
/*
|
|
* Flag indicating when the command has been sent. This is used to
|
|
* work out whether or not to send the stop
|
|
*/
|
|
unsigned int flags;
|
|
/* flag for current bus settings */
|
|
u32 bus_mode;
|
|
|
|
/* DMA buffer used for transmitting */
|
|
unsigned int* buffer;
|
|
dma_addr_t physical_address;
|
|
unsigned int total_length;
|
|
|
|
/* Latest in the scatterlist that has been enabled for transfer, but not freed */
|
|
int in_use_index;
|
|
|
|
/* Latest in the scatterlist that has been enabled for transfer */
|
|
int transfer_index;
|
|
};
|
|
|
|
/*
|
|
* Copy from sg to a dma block - used for transfers
|
|
*/
|
|
static inline void at91mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
|
|
{
|
|
unsigned int len, i, size;
|
|
unsigned *dmabuf = host->buffer;
|
|
|
|
size = host->total_length;
|
|
len = data->sg_len;
|
|
|
|
/*
|
|
* Just loop through all entries. Size might not
|
|
* be the entire list though so make sure that
|
|
* we do not transfer too much.
|
|
*/
|
|
for (i = 0; i < len; i++) {
|
|
struct scatterlist *sg;
|
|
int amount;
|
|
int index;
|
|
unsigned int *sgbuffer;
|
|
|
|
sg = &data->sg[i];
|
|
|
|
sgbuffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
|
|
amount = min(size, sg->length);
|
|
size -= amount;
|
|
amount /= 4;
|
|
|
|
for (index = 0; index < amount; index++)
|
|
*dmabuf++ = swab32(sgbuffer[index]);
|
|
|
|
kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ);
|
|
|
|
if (size == 0)
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Check that we didn't get a request to transfer
|
|
* more data than can fit into the SG list.
|
|
*/
|
|
BUG_ON(size != 0);
|
|
}
|
|
|
|
/*
|
|
* Prepare a dma read
|
|
*/
|
|
static void at91mci_pre_dma_read(struct at91mci_host *host)
|
|
{
|
|
int i;
|
|
struct scatterlist *sg;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
|
|
pr_debug("pre dma read\n");
|
|
|
|
cmd = host->cmd;
|
|
if (!cmd) {
|
|
pr_debug("no command\n");
|
|
return;
|
|
}
|
|
|
|
data = cmd->data;
|
|
if (!data) {
|
|
pr_debug("no data\n");
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
/* nothing left to transfer */
|
|
if (host->transfer_index >= data->sg_len) {
|
|
pr_debug("Nothing left to transfer (index = %d)\n", host->transfer_index);
|
|
break;
|
|
}
|
|
|
|
/* Check to see if this needs filling */
|
|
if (i == 0) {
|
|
if (at91_mci_read(AT91_PDC_RCR) != 0) {
|
|
pr_debug("Transfer active in current\n");
|
|
continue;
|
|
}
|
|
}
|
|
else {
|
|
if (at91_mci_read(AT91_PDC_RNCR) != 0) {
|
|
pr_debug("Transfer active in next\n");
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* Setup the next transfer */
|
|
pr_debug("Using transfer index %d\n", host->transfer_index);
|
|
|
|
sg = &data->sg[host->transfer_index++];
|
|
pr_debug("sg = %p\n", sg);
|
|
|
|
sg->dma_address = dma_map_page(NULL, sg->page, sg->offset, sg->length, DMA_FROM_DEVICE);
|
|
|
|
pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
|
|
|
|
if (i == 0) {
|
|
at91_mci_write(AT91_PDC_RPR, sg->dma_address);
|
|
at91_mci_write(AT91_PDC_RCR, sg->length / 4);
|
|
}
|
|
else {
|
|
at91_mci_write(AT91_PDC_RNPR, sg->dma_address);
|
|
at91_mci_write(AT91_PDC_RNCR, sg->length / 4);
|
|
}
|
|
}
|
|
|
|
pr_debug("pre dma read done\n");
|
|
}
|
|
|
|
/*
|
|
* Handle after a dma read
|
|
*/
|
|
static void at91mci_post_dma_read(struct at91mci_host *host)
|
|
{
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
|
|
pr_debug("post dma read\n");
|
|
|
|
cmd = host->cmd;
|
|
if (!cmd) {
|
|
pr_debug("no command\n");
|
|
return;
|
|
}
|
|
|
|
data = cmd->data;
|
|
if (!data) {
|
|
pr_debug("no data\n");
|
|
return;
|
|
}
|
|
|
|
while (host->in_use_index < host->transfer_index) {
|
|
unsigned int *buffer;
|
|
int index;
|
|
int len;
|
|
|
|
struct scatterlist *sg;
|
|
|
|
pr_debug("finishing index %d\n", host->in_use_index);
|
|
|
|
sg = &data->sg[host->in_use_index++];
|
|
|
|
pr_debug("Unmapping page %08X\n", sg->dma_address);
|
|
|
|
dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE);
|
|
|
|
/* Swap the contents of the buffer */
|
|
buffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
|
|
pr_debug("buffer = %p, length = %d\n", buffer, sg->length);
|
|
|
|
data->bytes_xfered += sg->length;
|
|
|
|
len = sg->length / 4;
|
|
|
|
for (index = 0; index < len; index++) {
|
|
buffer[index] = swab32(buffer[index]);
|
|
}
|
|
kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
|
|
flush_dcache_page(sg->page);
|
|
}
|
|
|
|
/* Is there another transfer to trigger? */
|
|
if (host->transfer_index < data->sg_len)
|
|
at91mci_pre_dma_read(host);
|
|
else {
|
|
at91_mci_write(AT91_MCI_IER, AT91_MCI_RXBUFF);
|
|
at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
|
|
}
|
|
|
|
pr_debug("post dma read done\n");
|
|
}
|
|
|
|
/*
|
|
* Handle transmitted data
|
|
*/
|
|
static void at91_mci_handle_transmitted(struct at91mci_host *host)
|
|
{
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
|
|
pr_debug("Handling the transmit\n");
|
|
|
|
/* Disable the transfer */
|
|
at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
|
|
|
|
/* Now wait for cmd ready */
|
|
at91_mci_write(AT91_MCI_IDR, AT91_MCI_TXBUFE);
|
|
at91_mci_write(AT91_MCI_IER, AT91_MCI_NOTBUSY);
|
|
|
|
cmd = host->cmd;
|
|
if (!cmd) return;
|
|
|
|
data = cmd->data;
|
|
if (!data) return;
|
|
|
|
data->bytes_xfered = host->total_length;
|
|
}
|
|
|
|
/*
|
|
* Enable the controller
|
|
*/
|
|
static void at91_mci_enable(void)
|
|
{
|
|
at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIEN);
|
|
at91_mci_write(AT91_MCI_IDR, 0xFFFFFFFF);
|
|
at91_mci_write(AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
|
|
at91_mci_write(AT91_MCI_MR, 0x834A);
|
|
at91_mci_write(AT91_MCI_SDCR, 0x0);
|
|
}
|
|
|
|
/*
|
|
* Disable the controller
|
|
*/
|
|
static void at91_mci_disable(void)
|
|
{
|
|
at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST);
|
|
}
|
|
|
|
/*
|
|
* Send a command
|
|
* return the interrupts to enable
|
|
*/
|
|
static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd)
|
|
{
|
|
unsigned int cmdr, mr;
|
|
unsigned int block_length;
|
|
struct mmc_data *data = cmd->data;
|
|
|
|
unsigned int blocks;
|
|
unsigned int ier = 0;
|
|
|
|
host->cmd = cmd;
|
|
|
|
/* Not sure if this is needed */
|
|
#if 0
|
|
if ((at91_mci_read(AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
|
|
pr_debug("Clearing timeout\n");
|
|
at91_mci_write(AT91_MCI_ARGR, 0);
|
|
at91_mci_write(AT91_MCI_CMDR, AT91_MCI_OPDCMD);
|
|
while (!(at91_mci_read(AT91_MCI_SR) & AT91_MCI_CMDRDY)) {
|
|
/* spin */
|
|
pr_debug("Clearing: SR = %08X\n", at91_mci_read(AT91_MCI_SR));
|
|
}
|
|
}
|
|
#endif
|
|
cmdr = cmd->opcode;
|
|
|
|
if (mmc_resp_type(cmd) == MMC_RSP_NONE)
|
|
cmdr |= AT91_MCI_RSPTYP_NONE;
|
|
else {
|
|
/* if a response is expected then allow maximum response latancy */
|
|
cmdr |= AT91_MCI_MAXLAT;
|
|
/* set 136 bit response for R2, 48 bit response otherwise */
|
|
if (mmc_resp_type(cmd) == MMC_RSP_R2)
|
|
cmdr |= AT91_MCI_RSPTYP_136;
|
|
else
|
|
cmdr |= AT91_MCI_RSPTYP_48;
|
|
}
|
|
|
|
if (data) {
|
|
block_length = data->blksz;
|
|
blocks = data->blocks;
|
|
|
|
/* always set data start - also set direction flag for read */
|
|
if (data->flags & MMC_DATA_READ)
|
|
cmdr |= (AT91_MCI_TRDIR | AT91_MCI_TRCMD_START);
|
|
else if (data->flags & MMC_DATA_WRITE)
|
|
cmdr |= AT91_MCI_TRCMD_START;
|
|
|
|
if (data->flags & MMC_DATA_STREAM)
|
|
cmdr |= AT91_MCI_TRTYP_STREAM;
|
|
if (data->flags & MMC_DATA_MULTI)
|
|
cmdr |= AT91_MCI_TRTYP_MULTIPLE;
|
|
}
|
|
else {
|
|
block_length = 0;
|
|
blocks = 0;
|
|
}
|
|
|
|
if (cmd->opcode == MMC_STOP_TRANSMISSION)
|
|
cmdr |= AT91_MCI_TRCMD_STOP;
|
|
|
|
if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
cmdr |= AT91_MCI_OPDCMD;
|
|
|
|
/*
|
|
* Set the arguments and send the command
|
|
*/
|
|
pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08lX)\n",
|
|
cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(AT91_MCI_MR));
|
|
|
|
if (!data) {
|
|
at91_mci_write(AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
|
|
at91_mci_write(AT91_PDC_RPR, 0);
|
|
at91_mci_write(AT91_PDC_RCR, 0);
|
|
at91_mci_write(AT91_PDC_RNPR, 0);
|
|
at91_mci_write(AT91_PDC_RNCR, 0);
|
|
at91_mci_write(AT91_PDC_TPR, 0);
|
|
at91_mci_write(AT91_PDC_TCR, 0);
|
|
at91_mci_write(AT91_PDC_TNPR, 0);
|
|
at91_mci_write(AT91_PDC_TNCR, 0);
|
|
|
|
at91_mci_write(AT91_MCI_ARGR, cmd->arg);
|
|
at91_mci_write(AT91_MCI_CMDR, cmdr);
|
|
return AT91_MCI_CMDRDY;
|
|
}
|
|
|
|
mr = at91_mci_read(AT91_MCI_MR) & 0x7fff; /* zero block length and PDC mode */
|
|
at91_mci_write(AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
|
|
|
|
/*
|
|
* Disable the PDC controller
|
|
*/
|
|
at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
|
|
|
|
if (cmdr & AT91_MCI_TRCMD_START) {
|
|
data->bytes_xfered = 0;
|
|
host->transfer_index = 0;
|
|
host->in_use_index = 0;
|
|
if (cmdr & AT91_MCI_TRDIR) {
|
|
/*
|
|
* Handle a read
|
|
*/
|
|
host->buffer = NULL;
|
|
host->total_length = 0;
|
|
|
|
at91mci_pre_dma_read(host);
|
|
ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
|
|
}
|
|
else {
|
|
/*
|
|
* Handle a write
|
|
*/
|
|
host->total_length = block_length * blocks;
|
|
host->buffer = dma_alloc_coherent(NULL,
|
|
host->total_length,
|
|
&host->physical_address, GFP_KERNEL);
|
|
|
|
at91mci_sg_to_dma(host, data);
|
|
|
|
pr_debug("Transmitting %d bytes\n", host->total_length);
|
|
|
|
at91_mci_write(AT91_PDC_TPR, host->physical_address);
|
|
at91_mci_write(AT91_PDC_TCR, host->total_length / 4);
|
|
ier = AT91_MCI_TXBUFE;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Send the command and then enable the PDC - not the other way round as
|
|
* the data sheet says
|
|
*/
|
|
|
|
at91_mci_write(AT91_MCI_ARGR, cmd->arg);
|
|
at91_mci_write(AT91_MCI_CMDR, cmdr);
|
|
|
|
if (cmdr & AT91_MCI_TRCMD_START) {
|
|
if (cmdr & AT91_MCI_TRDIR)
|
|
at91_mci_write(AT91_PDC_PTCR, AT91_PDC_RXTEN);
|
|
else
|
|
at91_mci_write(AT91_PDC_PTCR, AT91_PDC_TXTEN);
|
|
}
|
|
return ier;
|
|
}
|
|
|
|
/*
|
|
* Wait for a command to complete
|
|
*/
|
|
static void at91mci_process_command(struct at91mci_host *host, struct mmc_command *cmd)
|
|
{
|
|
unsigned int ier;
|
|
|
|
ier = at91_mci_send_command(host, cmd);
|
|
|
|
pr_debug("setting ier to %08X\n", ier);
|
|
|
|
/* Stop on errors or the required value */
|
|
at91_mci_write(AT91_MCI_IER, 0xffff0000 | ier);
|
|
}
|
|
|
|
/*
|
|
* Process the next step in the request
|
|
*/
|
|
static void at91mci_process_next(struct at91mci_host *host)
|
|
{
|
|
if (!(host->flags & FL_SENT_COMMAND)) {
|
|
host->flags |= FL_SENT_COMMAND;
|
|
at91mci_process_command(host, host->request->cmd);
|
|
}
|
|
else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
|
|
host->flags |= FL_SENT_STOP;
|
|
at91mci_process_command(host, host->request->stop);
|
|
}
|
|
else
|
|
mmc_request_done(host->mmc, host->request);
|
|
}
|
|
|
|
/*
|
|
* Handle a command that has been completed
|
|
*/
|
|
static void at91mci_completed_command(struct at91mci_host *host)
|
|
{
|
|
struct mmc_command *cmd = host->cmd;
|
|
unsigned int status;
|
|
|
|
at91_mci_write(AT91_MCI_IDR, 0xffffffff);
|
|
|
|
cmd->resp[0] = at91_mci_read(AT91_MCI_RSPR(0));
|
|
cmd->resp[1] = at91_mci_read(AT91_MCI_RSPR(1));
|
|
cmd->resp[2] = at91_mci_read(AT91_MCI_RSPR(2));
|
|
cmd->resp[3] = at91_mci_read(AT91_MCI_RSPR(3));
|
|
|
|
if (host->buffer) {
|
|
dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address);
|
|
host->buffer = NULL;
|
|
}
|
|
|
|
status = at91_mci_read(AT91_MCI_SR);
|
|
|
|
pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
|
|
status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
|
|
|
|
if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
|
|
AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
|
|
AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
|
|
if ((status & AT91_MCI_RCRCE) &&
|
|
((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
|
|
cmd->error = MMC_ERR_NONE;
|
|
}
|
|
else {
|
|
if (status & (AT91_MCI_RTOE | AT91_MCI_DTOE))
|
|
cmd->error = MMC_ERR_TIMEOUT;
|
|
else if (status & (AT91_MCI_RCRCE | AT91_MCI_DCRCE))
|
|
cmd->error = MMC_ERR_BADCRC;
|
|
else if (status & (AT91_MCI_OVRE | AT91_MCI_UNRE))
|
|
cmd->error = MMC_ERR_FIFO;
|
|
else
|
|
cmd->error = MMC_ERR_FAILED;
|
|
|
|
pr_debug("Error detected and set to %d (cmd = %d, retries = %d)\n",
|
|
cmd->error, cmd->opcode, cmd->retries);
|
|
}
|
|
}
|
|
else
|
|
cmd->error = MMC_ERR_NONE;
|
|
|
|
at91mci_process_next(host);
|
|
}
|
|
|
|
/*
|
|
* Handle an MMC request
|
|
*/
|
|
static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct at91mci_host *host = mmc_priv(mmc);
|
|
host->request = mrq;
|
|
host->flags = 0;
|
|
|
|
at91mci_process_next(host);
|
|
}
|
|
|
|
/*
|
|
* Set the IOS
|
|
*/
|
|
static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
int clkdiv;
|
|
struct at91mci_host *host = mmc_priv(mmc);
|
|
unsigned long at91_master_clock = clk_get_rate(mci_clk);
|
|
|
|
host->bus_mode = ios->bus_mode;
|
|
|
|
if (ios->clock == 0) {
|
|
/* Disable the MCI controller */
|
|
at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIDIS);
|
|
clkdiv = 0;
|
|
}
|
|
else {
|
|
/* Enable the MCI controller */
|
|
at91_mci_write(AT91_MCI_CR, AT91_MCI_MCIEN);
|
|
|
|
if ((at91_master_clock % (ios->clock * 2)) == 0)
|
|
clkdiv = ((at91_master_clock / ios->clock) / 2) - 1;
|
|
else
|
|
clkdiv = (at91_master_clock / ios->clock) / 2;
|
|
|
|
pr_debug("clkdiv = %d. mcck = %ld\n", clkdiv,
|
|
at91_master_clock / (2 * (clkdiv + 1)));
|
|
}
|
|
if (ios->bus_width == MMC_BUS_WIDTH_4 && host->board->wire4) {
|
|
pr_debug("MMC: Setting controller bus width to 4\n");
|
|
at91_mci_write(AT91_MCI_SDCR, at91_mci_read(AT91_MCI_SDCR) | AT91_MCI_SDCBUS);
|
|
}
|
|
else {
|
|
pr_debug("MMC: Setting controller bus width to 1\n");
|
|
at91_mci_write(AT91_MCI_SDCR, at91_mci_read(AT91_MCI_SDCR) & ~AT91_MCI_SDCBUS);
|
|
}
|
|
|
|
/* Set the clock divider */
|
|
at91_mci_write(AT91_MCI_MR, (at91_mci_read(AT91_MCI_MR) & ~AT91_MCI_CLKDIV) | clkdiv);
|
|
|
|
/* maybe switch power to the card */
|
|
if (host->board->vcc_pin) {
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_OFF:
|
|
at91_set_gpio_output(host->board->vcc_pin, 0);
|
|
break;
|
|
case MMC_POWER_UP:
|
|
case MMC_POWER_ON:
|
|
at91_set_gpio_output(host->board->vcc_pin, 1);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle an interrupt
|
|
*/
|
|
static irqreturn_t at91_mci_irq(int irq, void *devid, struct pt_regs *regs)
|
|
{
|
|
struct at91mci_host *host = devid;
|
|
int completed = 0;
|
|
|
|
unsigned int int_status;
|
|
|
|
int_status = at91_mci_read(AT91_MCI_SR);
|
|
pr_debug("MCI irq: status = %08X, %08lX, %08lX\n", int_status, at91_mci_read(AT91_MCI_IMR),
|
|
int_status & at91_mci_read(AT91_MCI_IMR));
|
|
|
|
if ((int_status & at91_mci_read(AT91_MCI_IMR)) & 0xffff0000)
|
|
completed = 1;
|
|
|
|
int_status &= at91_mci_read(AT91_MCI_IMR);
|
|
|
|
if (int_status & AT91_MCI_UNRE)
|
|
pr_debug("MMC: Underrun error\n");
|
|
if (int_status & AT91_MCI_OVRE)
|
|
pr_debug("MMC: Overrun error\n");
|
|
if (int_status & AT91_MCI_DTOE)
|
|
pr_debug("MMC: Data timeout\n");
|
|
if (int_status & AT91_MCI_DCRCE)
|
|
pr_debug("MMC: CRC error in data\n");
|
|
if (int_status & AT91_MCI_RTOE)
|
|
pr_debug("MMC: Response timeout\n");
|
|
if (int_status & AT91_MCI_RENDE)
|
|
pr_debug("MMC: Response end bit error\n");
|
|
if (int_status & AT91_MCI_RCRCE)
|
|
pr_debug("MMC: Response CRC error\n");
|
|
if (int_status & AT91_MCI_RDIRE)
|
|
pr_debug("MMC: Response direction error\n");
|
|
if (int_status & AT91_MCI_RINDE)
|
|
pr_debug("MMC: Response index error\n");
|
|
|
|
/* Only continue processing if no errors */
|
|
if (!completed) {
|
|
if (int_status & AT91_MCI_TXBUFE) {
|
|
pr_debug("TX buffer empty\n");
|
|
at91_mci_handle_transmitted(host);
|
|
}
|
|
|
|
if (int_status & AT91_MCI_RXBUFF) {
|
|
pr_debug("RX buffer full\n");
|
|
at91_mci_write(AT91_MCI_IER, AT91_MCI_CMDRDY);
|
|
}
|
|
|
|
if (int_status & AT91_MCI_ENDTX) {
|
|
pr_debug("Transmit has ended\n");
|
|
}
|
|
|
|
if (int_status & AT91_MCI_ENDRX) {
|
|
pr_debug("Receive has ended\n");
|
|
at91mci_post_dma_read(host);
|
|
}
|
|
|
|
if (int_status & AT91_MCI_NOTBUSY) {
|
|
pr_debug("Card is ready\n");
|
|
at91_mci_write(AT91_MCI_IER, AT91_MCI_CMDRDY);
|
|
}
|
|
|
|
if (int_status & AT91_MCI_DTIP) {
|
|
pr_debug("Data transfer in progress\n");
|
|
}
|
|
|
|
if (int_status & AT91_MCI_BLKE) {
|
|
pr_debug("Block transfer has ended\n");
|
|
}
|
|
|
|
if (int_status & AT91_MCI_TXRDY) {
|
|
pr_debug("Ready to transmit\n");
|
|
}
|
|
|
|
if (int_status & AT91_MCI_RXRDY) {
|
|
pr_debug("Ready to receive\n");
|
|
}
|
|
|
|
if (int_status & AT91_MCI_CMDRDY) {
|
|
pr_debug("Command ready\n");
|
|
completed = 1;
|
|
}
|
|
}
|
|
at91_mci_write(AT91_MCI_IDR, int_status);
|
|
|
|
if (completed) {
|
|
pr_debug("Completed command\n");
|
|
at91_mci_write(AT91_MCI_IDR, 0xffffffff);
|
|
at91mci_completed_command(host);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t at91_mmc_det_irq(int irq, void *_host, struct pt_regs *regs)
|
|
{
|
|
struct at91mci_host *host = _host;
|
|
int present = !at91_get_gpio_value(irq);
|
|
|
|
/*
|
|
* we expect this irq on both insert and remove,
|
|
* and use a short delay to debounce.
|
|
*/
|
|
if (present != host->present) {
|
|
host->present = present;
|
|
pr_debug("%s: card %s\n", mmc_hostname(host->mmc),
|
|
present ? "insert" : "remove");
|
|
if (!present) {
|
|
pr_debug("****** Resetting SD-card bus width ******\n");
|
|
at91_mci_write(AT91_MCI_SDCR, 0);
|
|
}
|
|
mmc_detect_change(host->mmc, msecs_to_jiffies(100));
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
int at91_mci_get_ro(struct mmc_host *mmc)
|
|
{
|
|
int read_only = 0;
|
|
struct at91mci_host *host = mmc_priv(mmc);
|
|
|
|
if (host->board->wp_pin) {
|
|
read_only = at91_get_gpio_value(host->board->wp_pin);
|
|
printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc),
|
|
(read_only ? "read-only" : "read-write") );
|
|
}
|
|
else {
|
|
printk(KERN_WARNING "%s: host does not support reading read-only "
|
|
"switch. Assuming write-enable.\n", mmc_hostname(mmc));
|
|
}
|
|
return read_only;
|
|
}
|
|
|
|
static struct mmc_host_ops at91_mci_ops = {
|
|
.request = at91_mci_request,
|
|
.set_ios = at91_mci_set_ios,
|
|
.get_ro = at91_mci_get_ro,
|
|
};
|
|
|
|
/*
|
|
* Probe for the device
|
|
*/
|
|
static int at91_mci_probe(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct at91mci_host *host;
|
|
int ret;
|
|
|
|
pr_debug("Probe MCI devices\n");
|
|
at91_mci_disable();
|
|
at91_mci_enable();
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct at91mci_host), &pdev->dev);
|
|
if (!mmc) {
|
|
pr_debug("Failed to allocate mmc host\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
mmc->ops = &at91_mci_ops;
|
|
mmc->f_min = 375000;
|
|
mmc->f_max = 25000000;
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
host = mmc_priv(mmc);
|
|
host->mmc = mmc;
|
|
host->buffer = NULL;
|
|
host->bus_mode = 0;
|
|
host->board = pdev->dev.platform_data;
|
|
if (host->board->wire4) {
|
|
#ifdef SUPPORT_4WIRE
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
#else
|
|
printk("MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Get Clock
|
|
*/
|
|
mci_clk = clk_get(&pdev->dev, "mci_clk");
|
|
if (IS_ERR(mci_clk)) {
|
|
printk(KERN_ERR "AT91 MMC: no clock defined.\n");
|
|
mmc_free_host(mmc);
|
|
return -ENODEV;
|
|
}
|
|
clk_enable(mci_clk); /* Enable the peripheral clock */
|
|
|
|
/*
|
|
* Allocate the MCI interrupt
|
|
*/
|
|
ret = request_irq(AT91_ID_MCI, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
|
|
if (ret) {
|
|
printk(KERN_ERR "Failed to request MCI interrupt\n");
|
|
clk_disable(mci_clk);
|
|
clk_put(mci_clk);
|
|
mmc_free_host(mmc);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, mmc);
|
|
|
|
/*
|
|
* Add host to MMC layer
|
|
*/
|
|
if (host->board->det_pin)
|
|
host->present = !at91_get_gpio_value(host->board->det_pin);
|
|
else
|
|
host->present = -1;
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
/*
|
|
* monitor card insertion/removal if we can
|
|
*/
|
|
if (host->board->det_pin) {
|
|
ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
|
|
0, DRIVER_NAME, host);
|
|
if (ret)
|
|
printk(KERN_ERR "couldn't allocate MMC detect irq\n");
|
|
}
|
|
|
|
pr_debug(KERN_INFO "Added MCI driver\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Remove a device
|
|
*/
|
|
static int at91_mci_remove(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
struct at91mci_host *host;
|
|
|
|
if (!mmc)
|
|
return -1;
|
|
|
|
host = mmc_priv(mmc);
|
|
|
|
if (host->present != -1) {
|
|
free_irq(host->board->det_pin, host);
|
|
cancel_delayed_work(&host->mmc->detect);
|
|
}
|
|
|
|
mmc_remove_host(mmc);
|
|
at91_mci_disable();
|
|
free_irq(AT91_ID_MCI, host);
|
|
mmc_free_host(mmc);
|
|
|
|
clk_disable(mci_clk); /* Disable the peripheral clock */
|
|
clk_put(mci_clk);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
pr_debug("MCI Removed\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
int ret = 0;
|
|
|
|
if (mmc)
|
|
ret = mmc_suspend_host(mmc, state);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int at91_mci_resume(struct platform_device *pdev)
|
|
{
|
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
|
int ret = 0;
|
|
|
|
if (mmc)
|
|
ret = mmc_resume_host(mmc);
|
|
|
|
return ret;
|
|
}
|
|
#else
|
|
#define at91_mci_suspend NULL
|
|
#define at91_mci_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver at91_mci_driver = {
|
|
.probe = at91_mci_probe,
|
|
.remove = at91_mci_remove,
|
|
.suspend = at91_mci_suspend,
|
|
.resume = at91_mci_resume,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init at91_mci_init(void)
|
|
{
|
|
return platform_driver_register(&at91_mci_driver);
|
|
}
|
|
|
|
static void __exit at91_mci_exit(void)
|
|
{
|
|
platform_driver_unregister(&at91_mci_driver);
|
|
}
|
|
|
|
module_init(at91_mci_init);
|
|
module_exit(at91_mci_exit);
|
|
|
|
MODULE_DESCRIPTION("AT91 Multimedia Card Interface driver");
|
|
MODULE_AUTHOR("Nick Randell");
|
|
MODULE_LICENSE("GPL");
|