linux-stable/fs/xfs/libxfs/xfs_defer.c
Darrick J. Wong 710d707d2f xfs: always rejoin held resources during defer roll
During testing of xfs/141 on a V4 filesystem, I observed some
inconsistent behavior with regards to resources that are held (i.e.
remain locked) across a defer roll.  The transaction roll always gives
the defer roll function a new transaction, even if committing the old
transaction fails.  However, the defer roll function only rejoins the
held resources if the transaction commit succeedied.  This means that
callers of defer roll have to figure out whether the held resources are
attached to the transaction being passed back.

Worse yet, if the defer roll was part of a defer finish call, we have a
third possibility: the defer finish could pass back a dirty transaction
with dirty held resources and an error code.

The only sane way to handle all of these scenarios is to require that
the code that held the resource either cancel the transaction before
unlocking and releasing the resources, or use functions that detach
resources from a transaction properly (e.g.  xfs_trans_brelse) if they
need to drop the reference before committing or cancelling the
transaction.

In order to make this so, change the defer roll code to join held
resources to the new transaction unconditionally and fix all the bhold
callers to release the held buffers correctly.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-30 08:19:13 -07:00

556 lines
18 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Oracle. All Rights Reserved.
* Author: Darrick J. Wong <darrick.wong@oracle.com>
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_bit.h"
#include "xfs_sb.h"
#include "xfs_mount.h"
#include "xfs_defer.h"
#include "xfs_trans.h"
#include "xfs_buf_item.h"
#include "xfs_inode.h"
#include "xfs_inode_item.h"
#include "xfs_trace.h"
/*
* Deferred Operations in XFS
*
* Due to the way locking rules work in XFS, certain transactions (block
* mapping and unmapping, typically) have permanent reservations so that
* we can roll the transaction to adhere to AG locking order rules and
* to unlock buffers between metadata updates. Prior to rmap/reflink,
* the mapping code had a mechanism to perform these deferrals for
* extents that were going to be freed; this code makes that facility
* more generic.
*
* When adding the reverse mapping and reflink features, it became
* necessary to perform complex remapping multi-transactions to comply
* with AG locking order rules, and to be able to spread a single
* refcount update operation (an operation on an n-block extent can
* update as many as n records!) among multiple transactions. XFS can
* roll a transaction to facilitate this, but using this facility
* requires us to log "intent" items in case log recovery needs to
* redo the operation, and to log "done" items to indicate that redo
* is not necessary.
*
* Deferred work is tracked in xfs_defer_pending items. Each pending
* item tracks one type of deferred work. Incoming work items (which
* have not yet had an intent logged) are attached to a pending item
* on the dop_intake list, where they wait for the caller to finish
* the deferred operations.
*
* Finishing a set of deferred operations is an involved process. To
* start, we define "rolling a deferred-op transaction" as follows:
*
* > For each xfs_defer_pending item on the dop_intake list,
* - Sort the work items in AG order. XFS locking
* order rules require us to lock buffers in AG order.
* - Create a log intent item for that type.
* - Attach it to the pending item.
* - Move the pending item from the dop_intake list to the
* dop_pending list.
* > Roll the transaction.
*
* NOTE: To avoid exceeding the transaction reservation, we limit the
* number of items that we attach to a given xfs_defer_pending.
*
* The actual finishing process looks like this:
*
* > For each xfs_defer_pending in the dop_pending list,
* - Roll the deferred-op transaction as above.
* - Create a log done item for that type, and attach it to the
* log intent item.
* - For each work item attached to the log intent item,
* * Perform the described action.
* * Attach the work item to the log done item.
* * If the result of doing the work was -EAGAIN, ->finish work
* wants a new transaction. See the "Requesting a Fresh
* Transaction while Finishing Deferred Work" section below for
* details.
*
* The key here is that we must log an intent item for all pending
* work items every time we roll the transaction, and that we must log
* a done item as soon as the work is completed. With this mechanism
* we can perform complex remapping operations, chaining intent items
* as needed.
*
* Requesting a Fresh Transaction while Finishing Deferred Work
*
* If ->finish_item decides that it needs a fresh transaction to
* finish the work, it must ask its caller (xfs_defer_finish) for a
* continuation. The most likely cause of this circumstance are the
* refcount adjust functions deciding that they've logged enough items
* to be at risk of exceeding the transaction reservation.
*
* To get a fresh transaction, we want to log the existing log done
* item to prevent the log intent item from replaying, immediately log
* a new log intent item with the unfinished work items, roll the
* transaction, and re-call ->finish_item wherever it left off. The
* log done item and the new log intent item must be in the same
* transaction or atomicity cannot be guaranteed; defer_finish ensures
* that this happens.
*
* This requires some coordination between ->finish_item and
* defer_finish. Upon deciding to request a new transaction,
* ->finish_item should update the current work item to reflect the
* unfinished work. Next, it should reset the log done item's list
* count to the number of items finished, and return -EAGAIN.
* defer_finish sees the -EAGAIN, logs the new log intent item
* with the remaining work items, and leaves the xfs_defer_pending
* item at the head of the dop_work queue. Then it rolls the
* transaction and picks up processing where it left off. It is
* required that ->finish_item must be careful to leave enough
* transaction reservation to fit the new log intent item.
*
* This is an example of remapping the extent (E, E+B) into file X at
* offset A and dealing with the extent (C, C+B) already being mapped
* there:
* +-------------------------------------------------+
* | Unmap file X startblock C offset A length B | t0
* | Intent to reduce refcount for extent (C, B) |
* | Intent to remove rmap (X, C, A, B) |
* | Intent to free extent (D, 1) (bmbt block) |
* | Intent to map (X, A, B) at startblock E |
* +-------------------------------------------------+
* | Map file X startblock E offset A length B | t1
* | Done mapping (X, E, A, B) |
* | Intent to increase refcount for extent (E, B) |
* | Intent to add rmap (X, E, A, B) |
* +-------------------------------------------------+
* | Reduce refcount for extent (C, B) | t2
* | Done reducing refcount for extent (C, 9) |
* | Intent to reduce refcount for extent (C+9, B-9) |
* | (ran out of space after 9 refcount updates) |
* +-------------------------------------------------+
* | Reduce refcount for extent (C+9, B+9) | t3
* | Done reducing refcount for extent (C+9, B-9) |
* | Increase refcount for extent (E, B) |
* | Done increasing refcount for extent (E, B) |
* | Intent to free extent (C, B) |
* | Intent to free extent (F, 1) (refcountbt block) |
* | Intent to remove rmap (F, 1, REFC) |
* +-------------------------------------------------+
* | Remove rmap (X, C, A, B) | t4
* | Done removing rmap (X, C, A, B) |
* | Add rmap (X, E, A, B) |
* | Done adding rmap (X, E, A, B) |
* | Remove rmap (F, 1, REFC) |
* | Done removing rmap (F, 1, REFC) |
* +-------------------------------------------------+
* | Free extent (C, B) | t5
* | Done freeing extent (C, B) |
* | Free extent (D, 1) |
* | Done freeing extent (D, 1) |
* | Free extent (F, 1) |
* | Done freeing extent (F, 1) |
* +-------------------------------------------------+
*
* If we should crash before t2 commits, log recovery replays
* the following intent items:
*
* - Intent to reduce refcount for extent (C, B)
* - Intent to remove rmap (X, C, A, B)
* - Intent to free extent (D, 1) (bmbt block)
* - Intent to increase refcount for extent (E, B)
* - Intent to add rmap (X, E, A, B)
*
* In the process of recovering, it should also generate and take care
* of these intent items:
*
* - Intent to free extent (C, B)
* - Intent to free extent (F, 1) (refcountbt block)
* - Intent to remove rmap (F, 1, REFC)
*
* Note that the continuation requested between t2 and t3 is likely to
* reoccur.
*/
static const struct xfs_defer_op_type *defer_op_types[] = {
[XFS_DEFER_OPS_TYPE_BMAP] = &xfs_bmap_update_defer_type,
[XFS_DEFER_OPS_TYPE_REFCOUNT] = &xfs_refcount_update_defer_type,
[XFS_DEFER_OPS_TYPE_RMAP] = &xfs_rmap_update_defer_type,
[XFS_DEFER_OPS_TYPE_FREE] = &xfs_extent_free_defer_type,
[XFS_DEFER_OPS_TYPE_AGFL_FREE] = &xfs_agfl_free_defer_type,
};
/*
* For each pending item in the intake list, log its intent item and the
* associated extents, then add the entire intake list to the end of
* the pending list.
*/
STATIC void
xfs_defer_create_intents(
struct xfs_trans *tp)
{
struct list_head *li;
struct xfs_defer_pending *dfp;
const struct xfs_defer_op_type *ops;
list_for_each_entry(dfp, &tp->t_dfops, dfp_list) {
ops = defer_op_types[dfp->dfp_type];
dfp->dfp_intent = ops->create_intent(tp, dfp->dfp_count);
trace_xfs_defer_create_intent(tp->t_mountp, dfp);
list_sort(tp->t_mountp, &dfp->dfp_work, ops->diff_items);
list_for_each(li, &dfp->dfp_work)
ops->log_item(tp, dfp->dfp_intent, li);
}
}
/* Abort all the intents that were committed. */
STATIC void
xfs_defer_trans_abort(
struct xfs_trans *tp,
struct list_head *dop_pending)
{
struct xfs_defer_pending *dfp;
const struct xfs_defer_op_type *ops;
trace_xfs_defer_trans_abort(tp, _RET_IP_);
/* Abort intent items that don't have a done item. */
list_for_each_entry(dfp, dop_pending, dfp_list) {
ops = defer_op_types[dfp->dfp_type];
trace_xfs_defer_pending_abort(tp->t_mountp, dfp);
if (dfp->dfp_intent && !dfp->dfp_done) {
ops->abort_intent(dfp->dfp_intent);
dfp->dfp_intent = NULL;
}
}
}
/* Roll a transaction so we can do some deferred op processing. */
STATIC int
xfs_defer_trans_roll(
struct xfs_trans **tpp)
{
struct xfs_trans *tp = *tpp;
struct xfs_buf_log_item *bli;
struct xfs_inode_log_item *ili;
struct xfs_log_item *lip;
struct xfs_buf *bplist[XFS_DEFER_OPS_NR_BUFS];
struct xfs_inode *iplist[XFS_DEFER_OPS_NR_INODES];
int bpcount = 0, ipcount = 0;
int i;
int error;
list_for_each_entry(lip, &tp->t_items, li_trans) {
switch (lip->li_type) {
case XFS_LI_BUF:
bli = container_of(lip, struct xfs_buf_log_item,
bli_item);
if (bli->bli_flags & XFS_BLI_HOLD) {
if (bpcount >= XFS_DEFER_OPS_NR_BUFS) {
ASSERT(0);
return -EFSCORRUPTED;
}
xfs_trans_dirty_buf(tp, bli->bli_buf);
bplist[bpcount++] = bli->bli_buf;
}
break;
case XFS_LI_INODE:
ili = container_of(lip, struct xfs_inode_log_item,
ili_item);
if (ili->ili_lock_flags == 0) {
if (ipcount >= XFS_DEFER_OPS_NR_INODES) {
ASSERT(0);
return -EFSCORRUPTED;
}
xfs_trans_log_inode(tp, ili->ili_inode,
XFS_ILOG_CORE);
iplist[ipcount++] = ili->ili_inode;
}
break;
default:
break;
}
}
trace_xfs_defer_trans_roll(tp, _RET_IP_);
/*
* Roll the transaction. Rolling always given a new transaction (even
* if committing the old one fails!) to hand back to the caller, so we
* join the held resources to the new transaction so that we always
* return with the held resources joined to @tpp, no matter what
* happened.
*/
error = xfs_trans_roll(tpp);
tp = *tpp;
/* Rejoin the joined inodes. */
for (i = 0; i < ipcount; i++)
xfs_trans_ijoin(tp, iplist[i], 0);
/* Rejoin the buffers and dirty them so the log moves forward. */
for (i = 0; i < bpcount; i++) {
xfs_trans_bjoin(tp, bplist[i]);
xfs_trans_bhold(tp, bplist[i]);
}
if (error)
trace_xfs_defer_trans_roll_error(tp, error);
return error;
}
/*
* Reset an already used dfops after finish.
*/
static void
xfs_defer_reset(
struct xfs_trans *tp)
{
ASSERT(list_empty(&tp->t_dfops));
/*
* Low mode state transfers across transaction rolls to mirror dfops
* lifetime. Clear it now that dfops is reset.
*/
tp->t_flags &= ~XFS_TRANS_LOWMODE;
}
/*
* Free up any items left in the list.
*/
static void
xfs_defer_cancel_list(
struct xfs_mount *mp,
struct list_head *dop_list)
{
struct xfs_defer_pending *dfp;
struct xfs_defer_pending *pli;
struct list_head *pwi;
struct list_head *n;
const struct xfs_defer_op_type *ops;
/*
* Free the pending items. Caller should already have arranged
* for the intent items to be released.
*/
list_for_each_entry_safe(dfp, pli, dop_list, dfp_list) {
ops = defer_op_types[dfp->dfp_type];
trace_xfs_defer_cancel_list(mp, dfp);
list_del(&dfp->dfp_list);
list_for_each_safe(pwi, n, &dfp->dfp_work) {
list_del(pwi);
dfp->dfp_count--;
ops->cancel_item(pwi);
}
ASSERT(dfp->dfp_count == 0);
kmem_free(dfp);
}
}
/*
* Finish all the pending work. This involves logging intent items for
* any work items that wandered in since the last transaction roll (if
* one has even happened), rolling the transaction, and finishing the
* work items in the first item on the logged-and-pending list.
*
* If an inode is provided, relog it to the new transaction.
*/
int
xfs_defer_finish_noroll(
struct xfs_trans **tp)
{
struct xfs_defer_pending *dfp;
struct list_head *li;
struct list_head *n;
void *state;
int error = 0;
const struct xfs_defer_op_type *ops;
LIST_HEAD(dop_pending);
ASSERT((*tp)->t_flags & XFS_TRANS_PERM_LOG_RES);
trace_xfs_defer_finish(*tp, _RET_IP_);
/* Until we run out of pending work to finish... */
while (!list_empty(&dop_pending) || !list_empty(&(*tp)->t_dfops)) {
/* log intents and pull in intake items */
xfs_defer_create_intents(*tp);
list_splice_tail_init(&(*tp)->t_dfops, &dop_pending);
/*
* Roll the transaction.
*/
error = xfs_defer_trans_roll(tp);
if (error)
goto out;
/* Log an intent-done item for the first pending item. */
dfp = list_first_entry(&dop_pending, struct xfs_defer_pending,
dfp_list);
ops = defer_op_types[dfp->dfp_type];
trace_xfs_defer_pending_finish((*tp)->t_mountp, dfp);
dfp->dfp_done = ops->create_done(*tp, dfp->dfp_intent,
dfp->dfp_count);
/* Finish the work items. */
state = NULL;
list_for_each_safe(li, n, &dfp->dfp_work) {
list_del(li);
dfp->dfp_count--;
error = ops->finish_item(*tp, li, dfp->dfp_done,
&state);
if (error == -EAGAIN) {
/*
* Caller wants a fresh transaction;
* put the work item back on the list
* and jump out.
*/
list_add(li, &dfp->dfp_work);
dfp->dfp_count++;
break;
} else if (error) {
/*
* Clean up after ourselves and jump out.
* xfs_defer_cancel will take care of freeing
* all these lists and stuff.
*/
if (ops->finish_cleanup)
ops->finish_cleanup(*tp, state, error);
goto out;
}
}
if (error == -EAGAIN) {
/*
* Caller wants a fresh transaction, so log a
* new log intent item to replace the old one
* and roll the transaction. See "Requesting
* a Fresh Transaction while Finishing
* Deferred Work" above.
*/
dfp->dfp_intent = ops->create_intent(*tp,
dfp->dfp_count);
dfp->dfp_done = NULL;
list_for_each(li, &dfp->dfp_work)
ops->log_item(*tp, dfp->dfp_intent, li);
} else {
/* Done with the dfp, free it. */
list_del(&dfp->dfp_list);
kmem_free(dfp);
}
if (ops->finish_cleanup)
ops->finish_cleanup(*tp, state, error);
}
out:
if (error) {
xfs_defer_trans_abort(*tp, &dop_pending);
xfs_force_shutdown((*tp)->t_mountp, SHUTDOWN_CORRUPT_INCORE);
trace_xfs_defer_finish_error(*tp, error);
xfs_defer_cancel_list((*tp)->t_mountp, &dop_pending);
xfs_defer_cancel(*tp);
return error;
}
trace_xfs_defer_finish_done(*tp, _RET_IP_);
return 0;
}
int
xfs_defer_finish(
struct xfs_trans **tp)
{
int error;
/*
* Finish and roll the transaction once more to avoid returning to the
* caller with a dirty transaction.
*/
error = xfs_defer_finish_noroll(tp);
if (error)
return error;
if ((*tp)->t_flags & XFS_TRANS_DIRTY) {
error = xfs_defer_trans_roll(tp);
if (error) {
xfs_force_shutdown((*tp)->t_mountp,
SHUTDOWN_CORRUPT_INCORE);
return error;
}
}
xfs_defer_reset(*tp);
return 0;
}
void
xfs_defer_cancel(
struct xfs_trans *tp)
{
struct xfs_mount *mp = tp->t_mountp;
trace_xfs_defer_cancel(tp, _RET_IP_);
xfs_defer_cancel_list(mp, &tp->t_dfops);
}
/* Add an item for later deferred processing. */
void
xfs_defer_add(
struct xfs_trans *tp,
enum xfs_defer_ops_type type,
struct list_head *li)
{
struct xfs_defer_pending *dfp = NULL;
const struct xfs_defer_op_type *ops;
ASSERT(tp->t_flags & XFS_TRANS_PERM_LOG_RES);
BUILD_BUG_ON(ARRAY_SIZE(defer_op_types) != XFS_DEFER_OPS_TYPE_MAX);
/*
* Add the item to a pending item at the end of the intake list.
* If the last pending item has the same type, reuse it. Else,
* create a new pending item at the end of the intake list.
*/
if (!list_empty(&tp->t_dfops)) {
dfp = list_last_entry(&tp->t_dfops,
struct xfs_defer_pending, dfp_list);
ops = defer_op_types[dfp->dfp_type];
if (dfp->dfp_type != type ||
(ops->max_items && dfp->dfp_count >= ops->max_items))
dfp = NULL;
}
if (!dfp) {
dfp = kmem_alloc(sizeof(struct xfs_defer_pending),
KM_SLEEP | KM_NOFS);
dfp->dfp_type = type;
dfp->dfp_intent = NULL;
dfp->dfp_done = NULL;
dfp->dfp_count = 0;
INIT_LIST_HEAD(&dfp->dfp_work);
list_add_tail(&dfp->dfp_list, &tp->t_dfops);
}
list_add_tail(li, &dfp->dfp_work);
dfp->dfp_count++;
}
/*
* Move deferred ops from one transaction to another and reset the source to
* initial state. This is primarily used to carry state forward across
* transaction rolls with pending dfops.
*/
void
xfs_defer_move(
struct xfs_trans *dtp,
struct xfs_trans *stp)
{
list_splice_init(&stp->t_dfops, &dtp->t_dfops);
/*
* Low free space mode was historically controlled by a dfops field.
* This meant that low mode state potentially carried across multiple
* transaction rolls. Transfer low mode on a dfops move to preserve
* that behavior.
*/
dtp->t_flags |= (stp->t_flags & XFS_TRANS_LOWMODE);
xfs_defer_reset(stp);
}