..
8250.h
tty/serial/8250: use mctrl_gpio helpers
2019-06-21 10:18:43 +02:00
8250_accent.c
8250_acorn.c
8250_aspeed_vuart.c
serial: 8250: Process sysrq at port unlock time
2018-11-09 09:07:18 -08:00
8250_bcm2835aux.c
8250_boca.c
8250_core.c
serial: 8250: 8250_core: Fix missing unlock on error in serial8250_register_8250_port()
2019-07-03 19:28:40 +02:00
8250_dma.c
serial: 8250: factor out serial8250_{set,clear}_THRI() helpers
2019-06-18 09:36:55 +02:00
8250_dw.c
dmaengine: idma64: Use actual device for DMA transfers
2019-03-21 19:48:26 +05:30
8250_early.c
serial: 8250_early: Setup divider when uartclk is passed
2018-04-25 14:56:12 +02:00
8250_em.c
headers: separate linux/mod_devicetable.h from linux/platform_device.h
2018-07-07 17:52:26 +02:00
8250_exar.c
serial: 8250_exar: Adjust IOT2000 matching
2019-04-25 11:37:41 +02:00
8250_exar_st16c554.c
8250_fintek.c
serial: 8250_fintek: Make fintek_8250_set_termios static
2019-03-28 00:29:03 +09:00
8250_fourport.c
8250_fsl.c
serial: 8250: Rate limit serial port rx interrupts during input overruns
2018-12-17 16:02:57 +01:00
8250_gsc.c
8250_hp300.c
8250_hub6.c
8250_ingenic.c
Serial: Ingenic: Add support for the X1000.
2019-01-30 09:31:30 +01:00
8250_lpc18xx.c
8250_lpss.c
dmaengine: dw: Remove misleading is_private property
2019-01-07 17:57:13 +05:30
8250_men_mcb.c
tty: fix up a few remaining files without SPDX identifiers
2019-04-04 18:48:43 +02:00
8250_mid.c
8250_moxa.c
8250_mtk.c
uart: mediatek: support Rx in-band wakeup
2019-06-10 19:10:27 +02:00
8250_of.c
tty: serial: 8250-of: Do not warn on deferred probe
2019-06-10 19:12:09 +02:00
8250_omap.c
tty/serial/8250: use mctrl_gpio helpers
2019-06-21 10:18:43 +02:00
8250_pci.c
serial: 8250: pericom_do_set_divisor can be static
2019-06-18 13:37:57 +02:00
8250_pnp.c
tty: serial: 8250: Fix type field in format string
2019-05-21 12:12:03 +02:00
8250_port.c
Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled"
2019-06-21 11:07:34 +02:00
8250_pxa.c
serial: 8250_pxa: honor the port number from devicetree
2019-02-26 12:30:44 +01:00
8250_uniphier.c
serial: 8250_uniphier: add auto-flow-control support
2018-10-02 13:38:58 -07:00
Kconfig
tty/serial/8250: use mctrl_gpio helpers
2019-06-21 10:18:43 +02:00
Makefile
serial_cs.c
drivers/tty: add error handling for pcmcia_loop_config
2018-06-28 21:23:44 +09:00