linux-stable/drivers/bluetooth
Manoj Iyer 61c964ba17 Bluetooth: btusb: Add vendor specific ID (0a5c:21f4) BCM20702A0
Patch adds support for BCM20702A0 device id (0a5c:21f4).

usb-devices after patch was applied:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21f4 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=E4D53DF154D6
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

usb-devices before patch was applied:
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0a5c ProdID=21f4 Rev=01.12
S: Manufacturer=Broadcom Corp
S: Product=BCM20702A0
S: SerialNumber=E4D53DF154D6
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com>
Tested-by: Chris Gagnon <chris.gagnon@canonical.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06 15:19:35 -03:00
..
ath3k.c Bluetooth: add support for atheros 0930:0219 2012-06-11 23:54:33 -03:00
bcm203x.c USB: Disable hub-initiated LPM for comms devices. 2012-05-18 15:42:55 -07:00
bfusb.c USB: Disable hub-initiated LPM for comms devices. 2012-05-18 15:42:55 -07:00
bluecard_cs.c Bluetooth: bluecard_cs: Shorten scope for iobase 2012-06-30 12:33:06 -03:00
bpa10x.c Bluetooth: Rename HCI_QUIRK_NO_RESET to HCI_QUIRK_RESET_ON_CLOSE 2012-06-05 06:34:06 +03:00
bt3c_cs.c Bluetooth: Fix warning: using int as NULL pointer 2012-06-30 12:07:14 -03:00
btmrvl_debugfs.c simple_open: automatically convert to simple_open() 2012-04-05 15:25:50 -07:00
btmrvl_drv.h Bluetooth: btmrvl: Do not send vendor events to bluetooth stack 2012-06-19 00:19:11 -03:00
btmrvl_main.c Bluetooth: btmrvl: trivial style fixes 2012-07-09 09:45:10 -03:00
btmrvl_sdio.c Bluetooth: btmrvl: trivial style fixes 2012-07-09 09:45:10 -03:00
btmrvl_sdio.h Bluetooth: btmrvl: support Marvell Bluetooth device SD8787 2011-04-13 12:20:05 -03:00
btsdio.c Bluetooth: Remove hci_dev->driver_data 2012-02-13 17:01:37 +02:00
btuart_cs.c Bluetooth: Fix warning: using int as NULL pointer 2012-06-30 12:07:14 -03:00
btusb.c Bluetooth: btusb: Add vendor specific ID (0a5c:21f4) BCM20702A0 2012-08-06 15:19:35 -03:00
btwilink.c Bluetooth: Remove hci_dev->driver_data 2012-02-13 17:01:37 +02:00
dtl1_cs.c Bluetooth: cleanup dtl1_config 2012-06-30 11:44:36 -03:00
hci_ath.c Bluetooth: hci-uart-ath: Use GFP_ATOMIC in open() 2012-02-13 17:01:22 +02:00
hci_bcsp.c Bluetooth: Remove 'register' usage from the subsystem 2012-06-05 06:34:07 +03:00
hci_h4.c Bluetooth: Remove 'register' usage from the subsystem 2012-06-05 06:34:07 +03:00
hci_h5.c Bluetooth: Introduce a flags variable to Three-wire UART state 2012-07-17 14:49:24 -03:00
hci_ldisc.c Bluetooth: Add delayed init sequence support for UART controllers 2012-07-17 14:48:29 -03:00
hci_ll.c Bluetooth: Remove 'register' usage from the subsystem 2012-06-05 06:34:07 +03:00
hci_uart.h Bluetooth: Add delayed init sequence support for UART controllers 2012-07-17 14:48:29 -03:00
hci_vhci.c Bluetooth: vhci: Ignore return code of nonseekable_open() 2012-05-09 00:41:36 -03:00
Kconfig Bluetooth: Initial skeleton for Three-wire UART (H5) support 2012-07-17 14:33:20 -03:00
Makefile Bluetooth: Initial skeleton for Three-wire UART (H5) support 2012-07-17 14:33:20 -03:00