mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-31 00:17:44 +00:00
61e115a56d
SSB is an SoC bus used in a number of embedded devices. The most well-known of these devices is probably the Linksys WRT54G, but there are others as well. The bus is also used internally on the BCM43xx and BCM44xx devices from Broadcom. This patch also includes support for SSB ID tables in modules, so that SSB drivers can be loaded automatically. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
396 lines
17 KiB
C
396 lines
17 KiB
C
#ifndef LINUX_SSB_CHIPCO_H_
|
|
#define LINUX_SSB_CHIPCO_H_
|
|
|
|
/* SonicsSiliconBackplane CHIPCOMMON core hardware definitions
|
|
*
|
|
* The chipcommon core provides chip identification, SB control,
|
|
* jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
|
|
* gpio interface, extbus, and support for serial and parallel flashes.
|
|
*
|
|
* Copyright 2005, Broadcom Corporation
|
|
* Copyright 2006, Michael Buesch <mb@bu3sch.de>
|
|
*
|
|
* Licensed under the GPL version 2. See COPYING for details.
|
|
*/
|
|
|
|
/** ChipCommon core registers. **/
|
|
|
|
#define SSB_CHIPCO_CHIPID 0x0000
|
|
#define SSB_CHIPCO_IDMASK 0x0000FFFF
|
|
#define SSB_CHIPCO_REVMASK 0x000F0000
|
|
#define SSB_CHIPCO_REVSHIFT 16
|
|
#define SSB_CHIPCO_PACKMASK 0x00F00000
|
|
#define SSB_CHIPCO_PACKSHIFT 20
|
|
#define SSB_CHIPCO_NRCORESMASK 0x0F000000
|
|
#define SSB_CHIPCO_NRCORESSHIFT 24
|
|
#define SSB_CHIPCO_CAP 0x0004 /* Capabilities */
|
|
#define SSB_CHIPCO_CAP_NRUART 0x00000003 /* # of UARTs */
|
|
#define SSB_CHIPCO_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */
|
|
#define SSB_CHIPCO_CAP_UARTCLK 0x00000018 /* UART clock select */
|
|
#define SSB_CHIPCO_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */
|
|
#define SSB_CHIPCO_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */
|
|
#define SSB_CHIPCO_CAP_EXTBUS 0x000000C0 /* External buses present */
|
|
#define SSB_CHIPCO_CAP_FLASHT 0x00000700 /* Flash Type */
|
|
#define SSB_CHIPCO_FLASHT_NONE 0x00000000 /* No flash */
|
|
#define SSB_CHIPCO_FLASHT_STSER 0x00000100 /* ST serial flash */
|
|
#define SSB_CHIPCO_FLASHT_ATSER 0x00000200 /* Atmel serial flash */
|
|
#define SSB_CHIPCO_FLASHT_PARA 0x00000700 /* Parallel flash */
|
|
#define SSB_CHIPCO_CAP_PLLT 0x00038000 /* PLL Type */
|
|
#define SSB_PLLTYPE_NONE 0x00000000
|
|
#define SSB_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */
|
|
#define SSB_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */
|
|
#define SSB_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */
|
|
#define SSB_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */
|
|
#define SSB_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */
|
|
#define SSB_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */
|
|
#define SSB_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */
|
|
#define SSB_CHIPCO_CAP_PCTL 0x00040000 /* Power Control */
|
|
#define SSB_CHIPCO_CAP_OTPS 0x00380000 /* OTP size */
|
|
#define SSB_CHIPCO_CAP_OTPS_SHIFT 19
|
|
#define SSB_CHIPCO_CAP_OTPS_BASE 5
|
|
#define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */
|
|
#define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */
|
|
#define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */
|
|
#define SSB_CHIPCO_CORECTL 0x0008
|
|
#define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */
|
|
#define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */
|
|
#define SSB_CHIPCO_BIST 0x000C
|
|
#define SSB_CHIPCO_OTPS 0x0010 /* OTP status */
|
|
#define SSB_CHIPCO_OTPS_PROGFAIL 0x80000000
|
|
#define SSB_CHIPCO_OTPS_PROTECT 0x00000007
|
|
#define SSB_CHIPCO_OTPS_HW_PROTECT 0x00000001
|
|
#define SSB_CHIPCO_OTPS_SW_PROTECT 0x00000002
|
|
#define SSB_CHIPCO_OTPS_CID_PROTECT 0x00000004
|
|
#define SSB_CHIPCO_OTPC 0x0014 /* OTP control */
|
|
#define SSB_CHIPCO_OTPC_RECWAIT 0xFF000000
|
|
#define SSB_CHIPCO_OTPC_PROGWAIT 0x00FFFF00
|
|
#define SSB_CHIPCO_OTPC_PRW_SHIFT 8
|
|
#define SSB_CHIPCO_OTPC_MAXFAIL 0x00000038
|
|
#define SSB_CHIPCO_OTPC_VSEL 0x00000006
|
|
#define SSB_CHIPCO_OTPC_SELVL 0x00000001
|
|
#define SSB_CHIPCO_OTPP 0x0018 /* OTP prog */
|
|
#define SSB_CHIPCO_OTPP_COL 0x000000FF
|
|
#define SSB_CHIPCO_OTPP_ROW 0x0000FF00
|
|
#define SSB_CHIPCO_OTPP_ROW_SHIFT 8
|
|
#define SSB_CHIPCO_OTPP_READERR 0x10000000
|
|
#define SSB_CHIPCO_OTPP_VALUE 0x20000000
|
|
#define SSB_CHIPCO_OTPP_READ 0x40000000
|
|
#define SSB_CHIPCO_OTPP_START 0x80000000
|
|
#define SSB_CHIPCO_OTPP_BUSY 0x80000000
|
|
#define SSB_CHIPCO_IRQSTAT 0x0020
|
|
#define SSB_CHIPCO_IRQMASK 0x0024
|
|
#define SSB_CHIPCO_IRQ_GPIO 0x00000001 /* gpio intr */
|
|
#define SSB_CHIPCO_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */
|
|
#define SSB_CHIPCO_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */
|
|
#define SSB_CHIPCO_CHIPCTL 0x0028 /* Rev >= 11 only */
|
|
#define SSB_CHIPCO_CHIPSTAT 0x002C /* Rev >= 11 only */
|
|
#define SSB_CHIPCO_JCMD 0x0030 /* Rev >= 10 only */
|
|
#define SSB_CHIPCO_JCMD_START 0x80000000
|
|
#define SSB_CHIPCO_JCMD_BUSY 0x80000000
|
|
#define SSB_CHIPCO_JCMD_PAUSE 0x40000000
|
|
#define SSB_CHIPCO_JCMD0_ACC_MASK 0x0000F000
|
|
#define SSB_CHIPCO_JCMD0_ACC_IRDR 0x00000000
|
|
#define SSB_CHIPCO_JCMD0_ACC_DR 0x00001000
|
|
#define SSB_CHIPCO_JCMD0_ACC_IR 0x00002000
|
|
#define SSB_CHIPCO_JCMD0_ACC_RESET 0x00003000
|
|
#define SSB_CHIPCO_JCMD0_ACC_IRPDR 0x00004000
|
|
#define SSB_CHIPCO_JCMD0_ACC_PDR 0x00005000
|
|
#define SSB_CHIPCO_JCMD0_IRW_MASK 0x00000F00
|
|
#define SSB_CHIPCO_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */
|
|
#define SSB_CHIPCO_JCMD_ACC_IRDR 0x00000000
|
|
#define SSB_CHIPCO_JCMD_ACC_DR 0x00010000
|
|
#define SSB_CHIPCO_JCMD_ACC_IR 0x00020000
|
|
#define SSB_CHIPCO_JCMD_ACC_RESET 0x00030000
|
|
#define SSB_CHIPCO_JCMD_ACC_IRPDR 0x00040000
|
|
#define SSB_CHIPCO_JCMD_ACC_PDR 0x00050000
|
|
#define SSB_CHIPCO_JCMD_IRW_MASK 0x00001F00
|
|
#define SSB_CHIPCO_JCMD_IRW_SHIFT 8
|
|
#define SSB_CHIPCO_JCMD_DRW_MASK 0x0000003F
|
|
#define SSB_CHIPCO_JIR 0x0034 /* Rev >= 10 only */
|
|
#define SSB_CHIPCO_JDR 0x0038 /* Rev >= 10 only */
|
|
#define SSB_CHIPCO_JCTL 0x003C /* Rev >= 10 only */
|
|
#define SSB_CHIPCO_JCTL_FORCE_CLK 4 /* Force clock */
|
|
#define SSB_CHIPCO_JCTL_EXT_EN 2 /* Enable external targets */
|
|
#define SSB_CHIPCO_JCTL_EN 1 /* Enable Jtag master */
|
|
#define SSB_CHIPCO_FLASHCTL 0x0040
|
|
#define SSB_CHIPCO_FLASHCTL_START 0x80000000
|
|
#define SSB_CHIPCO_FLASHCTL_BUSY SSB_CHIPCO_FLASHCTL_START
|
|
#define SSB_CHIPCO_FLASHADDR 0x0044
|
|
#define SSB_CHIPCO_FLASHDATA 0x0048
|
|
#define SSB_CHIPCO_BCAST_ADDR 0x0050
|
|
#define SSB_CHIPCO_BCAST_DATA 0x0054
|
|
#define SSB_CHIPCO_GPIOIN 0x0060
|
|
#define SSB_CHIPCO_GPIOOUT 0x0064
|
|
#define SSB_CHIPCO_GPIOOUTEN 0x0068
|
|
#define SSB_CHIPCO_GPIOCTL 0x006C
|
|
#define SSB_CHIPCO_GPIOPOL 0x0070
|
|
#define SSB_CHIPCO_GPIOIRQ 0x0074
|
|
#define SSB_CHIPCO_WATCHDOG 0x0080
|
|
#define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */
|
|
#define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16
|
|
#define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */
|
|
#define SSB_CHIPCO_CLOCK_N 0x0090
|
|
#define SSB_CHIPCO_CLOCK_SB 0x0094
|
|
#define SSB_CHIPCO_CLOCK_PCI 0x0098
|
|
#define SSB_CHIPCO_CLOCK_M2 0x009C
|
|
#define SSB_CHIPCO_CLOCK_MIPS 0x00A0
|
|
#define SSB_CHIPCO_CLKDIV 0x00A4 /* Rev >= 3 only */
|
|
#define SSB_CHIPCO_CLKDIV_SFLASH 0x0F000000
|
|
#define SSB_CHIPCO_CLKDIV_SFLASH_SHIFT 24
|
|
#define SSB_CHIPCO_CLKDIV_OTP 0x000F0000
|
|
#define SSB_CHIPCO_CLKDIV_OTP_SHIFT 16
|
|
#define SSB_CHIPCO_CLKDIV_JTAG 0x00000F00
|
|
#define SSB_CHIPCO_CLKDIV_JTAG_SHIFT 8
|
|
#define SSB_CHIPCO_CLKDIV_UART 0x000000FF
|
|
#define SSB_CHIPCO_PLLONDELAY 0x00B0 /* Rev >= 4 only */
|
|
#define SSB_CHIPCO_FREFSELDELAY 0x00B4 /* Rev >= 4 only */
|
|
#define SSB_CHIPCO_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */
|
|
#define SSB_CHIPCO_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */
|
|
#define SSB_CHIPCO_SLOWCLKCTL_CLKDIV_SHIFT 16
|
|
#define SSB_CHIPCO_SYSCLKCTL 0x00C0 /* Rev >= 3 only */
|
|
#define SSB_CHIPCO_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */
|
|
#define SSB_CHIPCO_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */
|
|
#define SSB_CHIPCO_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */
|
|
#define SSB_CHIPCO_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */
|
|
#define SSB_CHIPCO_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */
|
|
#define SSB_CHIPCO_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */
|
|
#define SSB_CHIPCO_SYSCLKCTL_CLKDIV_SHIFT 16
|
|
#define SSB_CHIPCO_CLKSTSTR 0x00C4 /* Rev >= 3 only */
|
|
#define SSB_CHIPCO_PCMCIA_CFG 0x0100
|
|
#define SSB_CHIPCO_PCMCIA_MEMWAIT 0x0104
|
|
#define SSB_CHIPCO_PCMCIA_ATTRWAIT 0x0108
|
|
#define SSB_CHIPCO_PCMCIA_IOWAIT 0x010C
|
|
#define SSB_CHIPCO_IDE_CFG 0x0110
|
|
#define SSB_CHIPCO_IDE_MEMWAIT 0x0114
|
|
#define SSB_CHIPCO_IDE_ATTRWAIT 0x0118
|
|
#define SSB_CHIPCO_IDE_IOWAIT 0x011C
|
|
#define SSB_CHIPCO_PROG_CFG 0x0120
|
|
#define SSB_CHIPCO_PROG_WAITCNT 0x0124
|
|
#define SSB_CHIPCO_FLASH_CFG 0x0128
|
|
#define SSB_CHIPCO_FLASH_WAITCNT 0x012C
|
|
#define SSB_CHIPCO_UART0_DATA 0x0300
|
|
#define SSB_CHIPCO_UART0_IMR 0x0304
|
|
#define SSB_CHIPCO_UART0_FCR 0x0308
|
|
#define SSB_CHIPCO_UART0_LCR 0x030C
|
|
#define SSB_CHIPCO_UART0_MCR 0x0310
|
|
#define SSB_CHIPCO_UART0_LSR 0x0314
|
|
#define SSB_CHIPCO_UART0_MSR 0x0318
|
|
#define SSB_CHIPCO_UART0_SCRATCH 0x031C
|
|
#define SSB_CHIPCO_UART1_DATA 0x0400
|
|
#define SSB_CHIPCO_UART1_IMR 0x0404
|
|
#define SSB_CHIPCO_UART1_FCR 0x0408
|
|
#define SSB_CHIPCO_UART1_LCR 0x040C
|
|
#define SSB_CHIPCO_UART1_MCR 0x0410
|
|
#define SSB_CHIPCO_UART1_LSR 0x0414
|
|
#define SSB_CHIPCO_UART1_MSR 0x0418
|
|
#define SSB_CHIPCO_UART1_SCRATCH 0x041C
|
|
|
|
|
|
|
|
/** Clockcontrol masks and values **/
|
|
|
|
/* SSB_CHIPCO_CLOCK_N */
|
|
#define SSB_CHIPCO_CLK_N1 0x0000003F /* n1 control */
|
|
#define SSB_CHIPCO_CLK_N2 0x00003F00 /* n2 control */
|
|
#define SSB_CHIPCO_CLK_N2_SHIFT 8
|
|
#define SSB_CHIPCO_CLK_PLLC 0x000F0000 /* pll control */
|
|
#define SSB_CHIPCO_CLK_PLLC_SHIFT 16
|
|
|
|
/* SSB_CHIPCO_CLOCK_SB/PCI/UART */
|
|
#define SSB_CHIPCO_CLK_M1 0x0000003F /* m1 control */
|
|
#define SSB_CHIPCO_CLK_M2 0x00003F00 /* m2 control */
|
|
#define SSB_CHIPCO_CLK_M2_SHIFT 8
|
|
#define SSB_CHIPCO_CLK_M3 0x003F0000 /* m3 control */
|
|
#define SSB_CHIPCO_CLK_M3_SHIFT 16
|
|
#define SSB_CHIPCO_CLK_MC 0x1F000000 /* mux control */
|
|
#define SSB_CHIPCO_CLK_MC_SHIFT 24
|
|
|
|
/* N3M Clock control magic field values */
|
|
#define SSB_CHIPCO_CLK_F6_2 0x02 /* A factor of 2 in */
|
|
#define SSB_CHIPCO_CLK_F6_3 0x03 /* 6-bit fields like */
|
|
#define SSB_CHIPCO_CLK_F6_4 0x05 /* N1, M1 or M3 */
|
|
#define SSB_CHIPCO_CLK_F6_5 0x09
|
|
#define SSB_CHIPCO_CLK_F6_6 0x11
|
|
#define SSB_CHIPCO_CLK_F6_7 0x21
|
|
|
|
#define SSB_CHIPCO_CLK_F5_BIAS 5 /* 5-bit fields get this added */
|
|
|
|
#define SSB_CHIPCO_CLK_MC_BYPASS 0x08
|
|
#define SSB_CHIPCO_CLK_MC_M1 0x04
|
|
#define SSB_CHIPCO_CLK_MC_M1M2 0x02
|
|
#define SSB_CHIPCO_CLK_MC_M1M2M3 0x01
|
|
#define SSB_CHIPCO_CLK_MC_M1M3 0x11
|
|
|
|
/* Type 2 Clock control magic field values */
|
|
#define SSB_CHIPCO_CLK_T2_BIAS 2 /* n1, n2, m1 & m3 bias */
|
|
#define SSB_CHIPCO_CLK_T2M2_BIAS 3 /* m2 bias */
|
|
|
|
#define SSB_CHIPCO_CLK_T2MC_M1BYP 1
|
|
#define SSB_CHIPCO_CLK_T2MC_M2BYP 2
|
|
#define SSB_CHIPCO_CLK_T2MC_M3BYP 4
|
|
|
|
/* Type 6 Clock control magic field values */
|
|
#define SSB_CHIPCO_CLK_T6_MMASK 1 /* bits of interest in m */
|
|
#define SSB_CHIPCO_CLK_T6_M0 120000000 /* sb clock for m = 0 */
|
|
#define SSB_CHIPCO_CLK_T6_M1 100000000 /* sb clock for m = 1 */
|
|
#define SSB_CHIPCO_CLK_SB2MIPS_T6(sb) (2 * (sb))
|
|
|
|
/* Common clock base */
|
|
#define SSB_CHIPCO_CLK_BASE1 24000000 /* Half the clock freq */
|
|
#define SSB_CHIPCO_CLK_BASE2 12500000 /* Alternate crystal on some PLL's */
|
|
|
|
/* Clock control values for 200Mhz in 5350 */
|
|
#define SSB_CHIPCO_CLK_5350_N 0x0311
|
|
#define SSB_CHIPCO_CLK_5350_M 0x04020009
|
|
|
|
|
|
/** Bits in the config registers **/
|
|
|
|
#define SSB_CHIPCO_CFG_EN 0x0001 /* Enable */
|
|
#define SSB_CHIPCO_CFG_EXTM 0x000E /* Extif Mode */
|
|
#define SSB_CHIPCO_CFG_EXTM_ASYNC 0x0002 /* Async/Parallel flash */
|
|
#define SSB_CHIPCO_CFG_EXTM_SYNC 0x0004 /* Synchronous */
|
|
#define SSB_CHIPCO_CFG_EXTM_PCMCIA 0x0008 /* PCMCIA */
|
|
#define SSB_CHIPCO_CFG_EXTM_IDE 0x000A /* IDE */
|
|
#define SSB_CHIPCO_CFG_DS16 0x0010 /* Data size, 0=8bit, 1=16bit */
|
|
#define SSB_CHIPCO_CFG_CLKDIV 0x0060 /* Sync: Clock divisor */
|
|
#define SSB_CHIPCO_CFG_CLKEN 0x0080 /* Sync: Clock enable */
|
|
#define SSB_CHIPCO_CFG_BSTRO 0x0100 /* Sync: Size/Bytestrobe */
|
|
|
|
|
|
/** Flash-specific control/status values */
|
|
|
|
/* flashcontrol opcodes for ST flashes */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_WREN 0x0006 /* Write Enable */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */
|
|
#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */
|
|
|
|
/* Status register bits for ST flashes */
|
|
#define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */
|
|
#define SSB_CHIPCO_FLASHSTA_ST_WEL 0x02 /* Write Enable Latch */
|
|
#define SSB_CHIPCO_FLASHSTA_ST_BP 0x1C /* Block Protect */
|
|
#define SSB_CHIPCO_FLASHSTA_ST_BP_SHIFT 2
|
|
#define SSB_CHIPCO_FLASHSTA_ST_SRWD 0x80 /* Status Register Write Disable */
|
|
|
|
/* flashcontrol opcodes for Atmel flashes */
|
|
#define SSB_CHIPCO_FLASHCTL_AT_READ 0x07E8
|
|
#define SSB_CHIPCO_FLASHCTL_AT_PAGE_READ 0x07D2
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF1_READ /* FIXME */
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF2_READ /* FIXME */
|
|
#define SSB_CHIPCO_FLASHCTL_AT_STATUS 0x01D7
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE 0x0384
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRITE 0x0387
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF1_ERASE_PRGM 0x0283 /* Erase program */
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF2_ERASE_PRGM 0x0286 /* Erase program */
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM 0x0288
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF2_PROGRAM 0x0289
|
|
#define SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE 0x0281
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BLOCK_ERASE 0x0250
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRER_PRGM 0x0382 /* Write erase program */
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRER_PRGM 0x0385 /* Write erase program */
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD 0x0253
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF2_LOAD 0x0255
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF1_COMPARE 0x0260
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF2_COMPARE 0x0261
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF1_REPROGRAM 0x0258
|
|
#define SSB_CHIPCO_FLASHCTL_AT_BUF2_REPROGRAM 0x0259
|
|
|
|
/* Status register bits for Atmel flashes */
|
|
#define SSB_CHIPCO_FLASHSTA_AT_READY 0x80
|
|
#define SSB_CHIPCO_FLASHSTA_AT_MISMATCH 0x40
|
|
#define SSB_CHIPCO_FLASHSTA_AT_ID 0x38
|
|
#define SSB_CHIPCO_FLASHSTA_AT_ID_SHIFT 3
|
|
|
|
|
|
/** OTP **/
|
|
|
|
/* OTP regions */
|
|
#define SSB_CHIPCO_OTP_HW_REGION SSB_CHIPCO_OTPS_HW_PROTECT
|
|
#define SSB_CHIPCO_OTP_SW_REGION SSB_CHIPCO_OTPS_SW_PROTECT
|
|
#define SSB_CHIPCO_OTP_CID_REGION SSB_CHIPCO_OTPS_CID_PROTECT
|
|
|
|
/* OTP regions (Byte offsets from otp size) */
|
|
#define SSB_CHIPCO_OTP_SWLIM_OFF (-8)
|
|
#define SSB_CHIPCO_OTP_CIDBASE_OFF 0
|
|
#define SSB_CHIPCO_OTP_CIDLIM_OFF 8
|
|
|
|
/* Predefined OTP words (Word offset from otp size) */
|
|
#define SSB_CHIPCO_OTP_BOUNDARY_OFF (-4)
|
|
#define SSB_CHIPCO_OTP_HWSIGN_OFF (-3)
|
|
#define SSB_CHIPCO_OTP_SWSIGN_OFF (-2)
|
|
#define SSB_CHIPCO_OTP_CIDSIGN_OFF (-1)
|
|
|
|
#define SSB_CHIPCO_OTP_CID_OFF 0
|
|
#define SSB_CHIPCO_OTP_PKG_OFF 1
|
|
#define SSB_CHIPCO_OTP_FID_OFF 2
|
|
#define SSB_CHIPCO_OTP_RSV_OFF 3
|
|
#define SSB_CHIPCO_OTP_LIM_OFF 4
|
|
|
|
#define SSB_CHIPCO_OTP_SIGNATURE 0x578A
|
|
#define SSB_CHIPCO_OTP_MAGIC 0x4E56
|
|
|
|
|
|
struct ssb_device;
|
|
struct ssb_serial_port;
|
|
|
|
struct ssb_chipcommon {
|
|
struct ssb_device *dev;
|
|
u32 capabilities;
|
|
/* Fast Powerup Delay constant */
|
|
u16 fast_pwrup_delay;
|
|
};
|
|
|
|
extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
|
|
|
|
#include <linux/pm.h>
|
|
extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state);
|
|
extern void ssb_chipco_resume(struct ssb_chipcommon *cc);
|
|
|
|
extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
|
|
u32 *plltype, u32 *n, u32 *m);
|
|
extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
|
|
u32 *plltype, u32 *n, u32 *m);
|
|
extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
|
|
unsigned long ns_per_cycle);
|
|
|
|
enum ssb_clkmode {
|
|
SSB_CLKMODE_SLOW,
|
|
SSB_CLKMODE_FAST,
|
|
SSB_CLKMODE_DYNAMIC,
|
|
};
|
|
|
|
extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
|
|
enum ssb_clkmode mode);
|
|
|
|
extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
|
|
u32 ticks);
|
|
|
|
u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask);
|
|
|
|
void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value);
|
|
|
|
void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value);
|
|
|
|
#ifdef CONFIG_SSB_SERIAL
|
|
extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
|
|
struct ssb_serial_port *ports);
|
|
#endif /* CONFIG_SSB_SERIAL */
|
|
|
|
#endif /* LINUX_SSB_CHIPCO_H_ */
|