mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 17:08:10 +00:00
6286bbb405
This driver implements CPU frequency scaling for Apple Silicon SoCs, including M1 (t8103), M1 Max/Pro/Ultra (t600x), and M2 (t8112). Each CPU cluster has its own register set, and frequency management is fully automated by the hardware; the driver only has to write one register. There is boost frequency support, but the hardware will only allow their use if only a subset of cores in a cluster are in non-deep-idle. Since we don't support deep idle yet, these frequencies are not achievable, but the driver supports them. They will remain disabled in the device tree until deep idle is implemented, to avoid confusing users. This driver does not yet implement the memory controller performance state tuning that usually accompanies higher CPU p-states. This will be done in a future patch. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
117 lines
5.5 KiB
Makefile
117 lines
5.5 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
# CPUfreq core
|
|
obj-$(CONFIG_CPU_FREQ) += cpufreq.o freq_table.o
|
|
|
|
# CPUfreq stats
|
|
obj-$(CONFIG_CPU_FREQ_STAT) += cpufreq_stats.o
|
|
|
|
# CPUfreq governors
|
|
obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE) += cpufreq_performance.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
|
|
obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET) += cpufreq_governor_attr_set.o
|
|
|
|
obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o
|
|
obj-$(CONFIG_CPUFREQ_DT_PLATDEV) += cpufreq-dt-platdev.o
|
|
|
|
# Traces
|
|
CFLAGS_amd-pstate-trace.o := -I$(src)
|
|
amd_pstate-y := amd-pstate.o amd-pstate-trace.o
|
|
|
|
##################################################################################
|
|
# x86 drivers.
|
|
# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
|
|
# K8 systems. This is still the case but acpi-cpufreq errors out so that
|
|
# powernow-k8 can load then. ACPI is preferred to all other hardware-specific drivers.
|
|
# speedstep-* is preferred over p4-clockmod.
|
|
|
|
obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o
|
|
obj-$(CONFIG_X86_AMD_PSTATE) += amd_pstate.o
|
|
obj-$(CONFIG_X86_AMD_PSTATE_UT) += amd-pstate-ut.o
|
|
obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o
|
|
obj-$(CONFIG_X86_PCC_CPUFREQ) += pcc-cpufreq.o
|
|
obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o
|
|
obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o
|
|
obj-$(CONFIG_X86_LONGHAUL) += longhaul.o
|
|
obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o
|
|
obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o
|
|
obj-$(CONFIG_SC520_CPUFREQ) += sc520_freq.o
|
|
obj-$(CONFIG_X86_LONGRUN) += longrun.o
|
|
obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o
|
|
obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o
|
|
obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o
|
|
obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o
|
|
obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o
|
|
obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY) += amd_freq_sensitivity.o
|
|
|
|
##################################################################################
|
|
# ARM SoC drivers
|
|
obj-$(CONFIG_ARM_APPLE_SOC_CPUFREQ) += apple-soc-cpufreq.o
|
|
obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o
|
|
obj-$(CONFIG_ARM_ARMADA_8K_CPUFREQ) += armada-8k-cpufreq.o
|
|
obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
|
|
obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
|
|
obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
|
|
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
|
|
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
|
|
obj-$(CONFIG_ARM_IMX_CPUFREQ_DT) += imx-cpufreq-dt.o
|
|
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
|
|
obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += mediatek-cpufreq.o
|
|
obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ_HW) += mediatek-cpufreq-hw.o
|
|
obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
|
|
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
|
|
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
|
|
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
|
|
obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o
|
|
obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o
|
|
obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
|
|
obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
|
|
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
|
|
obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
|
|
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
|
|
obj-$(CONFIG_ARM_SCMI_CPUFREQ) += scmi-cpufreq.o
|
|
obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o
|
|
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
|
|
obj-$(CONFIG_ARM_STI_CPUFREQ) += sti-cpufreq.o
|
|
obj-$(CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM) += sun50i-cpufreq-nvmem.o
|
|
obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o
|
|
obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
|
|
obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o
|
|
obj-$(CONFIG_ARM_TEGRA194_CPUFREQ) += tegra194-cpufreq.o
|
|
obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o
|
|
obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
|
|
|
|
|
|
##################################################################################
|
|
# PowerPC platform drivers
|
|
obj-$(CONFIG_CPU_FREQ_CBE) += ppc-cbe-cpufreq.o
|
|
ppc-cbe-cpufreq-y += ppc_cbe_cpufreq_pervasive.o ppc_cbe_cpufreq.o
|
|
obj-$(CONFIG_CPU_FREQ_CBE_PMI) += ppc_cbe_cpufreq_pmi.o
|
|
obj-$(CONFIG_CPU_FREQ_MAPLE) += maple-cpufreq.o
|
|
obj-$(CONFIG_QORIQ_CPUFREQ) += qoriq-cpufreq.o
|
|
obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o
|
|
obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o
|
|
obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o
|
|
obj-$(CONFIG_POWERNV_CPUFREQ) += powernv-cpufreq.o
|
|
|
|
##################################################################################
|
|
# Other platform drivers
|
|
obj-$(CONFIG_BMIPS_CPUFREQ) += bmips-cpufreq.o
|
|
obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o
|
|
obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o
|
|
obj-$(CONFIG_LOONGSON1_CPUFREQ) += loongson1-cpufreq.o
|
|
obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o
|
|
obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o
|
|
obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o
|