172 lines
4.5 KiB
C
172 lines
4.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Meson G12A MIPI DSI Analog PHY
|
|
*
|
|
* Copyright (C) 2018 Amlogic, Inc. All rights reserved
|
|
* Copyright (C) 2022 BayLibre, SAS
|
|
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
*/
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/platform_device.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
#define HHI_MIPI_CNTL0 0x00
|
|
#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(31, 16)
|
|
#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0)
|
|
|
|
#define HHI_MIPI_CNTL1 0x04
|
|
#define HHI_MIPI_CNTL1_BANDGAP BIT(16)
|
|
#define HHI_MIPI_CNTL2_DIF_REF_CTL2 GENMASK(15, 0)
|
|
|
|
#define HHI_MIPI_CNTL2 0x08
|
|
#define HHI_MIPI_CNTL2_DIF_TX_CTL1 GENMASK(31, 16)
|
|
#define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11)
|
|
#define HHI_MIPI_CNTL2_DIF_TX_CTL0 GENMASK(10, 0)
|
|
|
|
#define DSI_LANE_0 BIT(4)
|
|
#define DSI_LANE_1 BIT(3)
|
|
#define DSI_LANE_CLK BIT(2)
|
|
#define DSI_LANE_2 BIT(1)
|
|
#define DSI_LANE_3 BIT(0)
|
|
|
|
struct phy_g12a_mipi_dphy_analog_priv {
|
|
struct phy *phy;
|
|
struct regmap *regmap;
|
|
struct phy_configure_opts_mipi_dphy config;
|
|
};
|
|
|
|
static int phy_g12a_mipi_dphy_analog_configure(struct phy *phy,
|
|
union phy_configure_opts *opts)
|
|
{
|
|
struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy);
|
|
int ret;
|
|
|
|
ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
|
|
if (ret)
|
|
return ret;
|
|
|
|
memcpy(&priv->config, opts, sizeof(priv->config));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_g12a_mipi_dphy_analog_power_on(struct phy *phy)
|
|
{
|
|
struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy);
|
|
unsigned int reg;
|
|
|
|
regmap_write(priv->regmap, HHI_MIPI_CNTL0,
|
|
FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL0, 0x8) |
|
|
FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0xa487));
|
|
|
|
regmap_write(priv->regmap, HHI_MIPI_CNTL1,
|
|
FIELD_PREP(HHI_MIPI_CNTL2_DIF_REF_CTL2, 0x2e) |
|
|
HHI_MIPI_CNTL1_BANDGAP);
|
|
|
|
regmap_write(priv->regmap, HHI_MIPI_CNTL2,
|
|
FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL0, 0x45a) |
|
|
FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL1, 0x2680));
|
|
|
|
reg = DSI_LANE_CLK;
|
|
switch (priv->config.lanes) {
|
|
case 4:
|
|
reg |= DSI_LANE_3;
|
|
fallthrough;
|
|
case 3:
|
|
reg |= DSI_LANE_2;
|
|
fallthrough;
|
|
case 2:
|
|
reg |= DSI_LANE_1;
|
|
fallthrough;
|
|
case 1:
|
|
reg |= DSI_LANE_0;
|
|
break;
|
|
default:
|
|
reg = 0;
|
|
}
|
|
|
|
regmap_update_bits(priv->regmap, HHI_MIPI_CNTL2,
|
|
HHI_MIPI_CNTL2_CH_EN,
|
|
FIELD_PREP(HHI_MIPI_CNTL2_CH_EN, reg));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_g12a_mipi_dphy_analog_power_off(struct phy *phy)
|
|
{
|
|
struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy);
|
|
|
|
regmap_write(priv->regmap, HHI_MIPI_CNTL0, 0);
|
|
regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0);
|
|
regmap_write(priv->regmap, HHI_MIPI_CNTL2, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops phy_g12a_mipi_dphy_analog_ops = {
|
|
.configure = phy_g12a_mipi_dphy_analog_configure,
|
|
.power_on = phy_g12a_mipi_dphy_analog_power_on,
|
|
.power_off = phy_g12a_mipi_dphy_analog_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int phy_g12a_mipi_dphy_analog_probe(struct platform_device *pdev)
|
|
{
|
|
struct phy_provider *phy;
|
|
struct device *dev = &pdev->dev;
|
|
struct phy_g12a_mipi_dphy_analog_priv *priv;
|
|
struct device_node *np = dev->of_node, *parent_np;
|
|
struct regmap *map;
|
|
|
|
priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
/* Get the hhi system controller node */
|
|
parent_np = of_get_parent(np);
|
|
map = syscon_node_to_regmap(parent_np);
|
|
of_node_put(parent_np);
|
|
if (IS_ERR(map))
|
|
return dev_err_probe(dev, PTR_ERR(map), "failed to get HHI regmap\n");
|
|
|
|
priv->regmap = map;
|
|
|
|
priv->phy = devm_phy_create(dev, np, &phy_g12a_mipi_dphy_analog_ops);
|
|
if (IS_ERR(priv->phy))
|
|
return dev_err_probe(dev, PTR_ERR(priv->phy), "failed to create PHY\n");
|
|
|
|
phy_set_drvdata(priv->phy, priv);
|
|
dev_set_drvdata(dev, priv);
|
|
|
|
phy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy);
|
|
}
|
|
|
|
static const struct of_device_id phy_g12a_mipi_dphy_analog_of_match[] = {
|
|
{
|
|
.compatible = "amlogic,g12a-mipi-dphy-analog",
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, phy_g12a_mipi_dphy_analog_of_match);
|
|
|
|
static struct platform_driver phy_g12a_mipi_dphy_analog_driver = {
|
|
.probe = phy_g12a_mipi_dphy_analog_probe,
|
|
.driver = {
|
|
.name = "phy-meson-g12a-mipi-dphy-analog",
|
|
.of_match_table = phy_g12a_mipi_dphy_analog_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(phy_g12a_mipi_dphy_analog_driver);
|
|
|
|
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
|
|
MODULE_DESCRIPTION("Meson G12A MIPI Analog D-PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|