linux-stable/drivers/hwmon/f75375s.c
Thomas Gleixner 74ba9207e1 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  675 mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 441 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:36:45 +02:00

911 lines
25 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* f75375s.c - driver for the Fintek F75375/SP, F75373 and
* F75387SG/RG hardware monitoring features
* Copyright (C) 2006-2007 Riku Voipio
*
* Datasheets available at:
*
* f75375:
* http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf
*
* f75373:
* http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf
*
* f75387:
* http://www.fintek.com.tw/files/productfiles/F75387_V027P.pdf
*/
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/f75375s.h>
#include <linux/slab.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
enum chips { f75373, f75375, f75387 };
/* Fintek F75375 registers */
#define F75375_REG_CONFIG0 0x0
#define F75375_REG_CONFIG1 0x1
#define F75375_REG_CONFIG2 0x2
#define F75375_REG_CONFIG3 0x3
#define F75375_REG_ADDR 0x4
#define F75375_REG_INTR 0x31
#define F75375_CHIP_ID 0x5A
#define F75375_REG_VERSION 0x5C
#define F75375_REG_VENDOR 0x5D
#define F75375_REG_FAN_TIMER 0x60
#define F75375_REG_VOLT(nr) (0x10 + (nr))
#define F75375_REG_VOLT_HIGH(nr) (0x20 + (nr) * 2)
#define F75375_REG_VOLT_LOW(nr) (0x21 + (nr) * 2)
#define F75375_REG_TEMP(nr) (0x14 + (nr))
#define F75387_REG_TEMP11_LSB(nr) (0x1a + (nr))
#define F75375_REG_TEMP_HIGH(nr) (0x28 + (nr) * 2)
#define F75375_REG_TEMP_HYST(nr) (0x29 + (nr) * 2)
#define F75375_REG_FAN(nr) (0x16 + (nr) * 2)
#define F75375_REG_FAN_MIN(nr) (0x2C + (nr) * 2)
#define F75375_REG_FAN_FULL(nr) (0x70 + (nr) * 0x10)
#define F75375_REG_FAN_PWM_DUTY(nr) (0x76 + (nr) * 0x10)
#define F75375_REG_FAN_PWM_CLOCK(nr) (0x7D + (nr) * 0x10)
#define F75375_REG_FAN_EXP(nr) (0x74 + (nr) * 0x10)
#define F75375_REG_FAN_B_TEMP(nr, step) ((0xA0 + (nr) * 0x10) + (step))
#define F75375_REG_FAN_B_SPEED(nr, step) \
((0xA5 + (nr) * 0x10) + (step) * 2)
#define F75375_REG_PWM1_RAISE_DUTY 0x69
#define F75375_REG_PWM2_RAISE_DUTY 0x6A
#define F75375_REG_PWM1_DROP_DUTY 0x6B
#define F75375_REG_PWM2_DROP_DUTY 0x6C
#define F75375_FAN_CTRL_LINEAR(nr) (4 + nr)
#define F75387_FAN_CTRL_LINEAR(nr) (1 + ((nr) * 4))
#define FAN_CTRL_MODE(nr) (4 + ((nr) * 2))
#define F75387_FAN_DUTY_MODE(nr) (2 + ((nr) * 4))
#define F75387_FAN_MANU_MODE(nr) ((nr) * 4)
/*
* Data structures and manipulation thereof
*/
struct f75375_data {
unsigned short addr;
struct device *hwmon_dev;
const char *name;
int kind;
struct mutex update_lock; /* protect register access */
char valid;
unsigned long last_updated; /* In jiffies */
unsigned long last_limits; /* In jiffies */
/* Register values */
u8 in[4];
u8 in_max[4];
u8 in_min[4];
u16 fan[2];
u16 fan_min[2];
u16 fan_max[2];
u16 fan_target[2];
u8 fan_timer;
u8 pwm[2];
u8 pwm_mode[2];
u8 pwm_enable[2];
/*
* f75387: For remote temperature reading, it uses signed 11-bit
* values with LSB = 0.125 degree Celsius, left-justified in 16-bit
* registers. For original 8-bit temp readings, the LSB just is 0.
*/
s16 temp11[2];
s8 temp_high[2];
s8 temp_max_hyst[2];
};
static int f75375_detect(struct i2c_client *client,
struct i2c_board_info *info);
static int f75375_probe(struct i2c_client *client,
const struct i2c_device_id *id);
static int f75375_remove(struct i2c_client *client);
static const struct i2c_device_id f75375_id[] = {
{ "f75373", f75373 },
{ "f75375", f75375 },
{ "f75387", f75387 },
{ }
};
MODULE_DEVICE_TABLE(i2c, f75375_id);
static struct i2c_driver f75375_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "f75375",
},
.probe = f75375_probe,
.remove = f75375_remove,
.id_table = f75375_id,
.detect = f75375_detect,
.address_list = normal_i2c,
};
static inline int f75375_read8(struct i2c_client *client, u8 reg)
{
return i2c_smbus_read_byte_data(client, reg);
}
/* in most cases, should be called while holding update_lock */
static inline u16 f75375_read16(struct i2c_client *client, u8 reg)
{
return (i2c_smbus_read_byte_data(client, reg) << 8)
| i2c_smbus_read_byte_data(client, reg + 1);
}
static inline void f75375_write8(struct i2c_client *client, u8 reg,
u8 value)
{
i2c_smbus_write_byte_data(client, reg, value);
}
static inline void f75375_write16(struct i2c_client *client, u8 reg,
u16 value)
{
int err = i2c_smbus_write_byte_data(client, reg, (value >> 8));
if (err)
return;
i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));
}
static void f75375_write_pwm(struct i2c_client *client, int nr)
{
struct f75375_data *data = i2c_get_clientdata(client);
if (data->kind == f75387)
f75375_write16(client, F75375_REG_FAN_EXP(nr), data->pwm[nr]);
else
f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
data->pwm[nr]);
}
static struct f75375_data *f75375_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int nr;
mutex_lock(&data->update_lock);
/* Limit registers cache is refreshed after 60 seconds */
if (time_after(jiffies, data->last_limits + 60 * HZ)
|| !data->valid) {
for (nr = 0; nr < 2; nr++) {
data->temp_high[nr] =
f75375_read8(client, F75375_REG_TEMP_HIGH(nr));
data->temp_max_hyst[nr] =
f75375_read8(client, F75375_REG_TEMP_HYST(nr));
data->fan_max[nr] =
f75375_read16(client, F75375_REG_FAN_FULL(nr));
data->fan_min[nr] =
f75375_read16(client, F75375_REG_FAN_MIN(nr));
data->fan_target[nr] =
f75375_read16(client, F75375_REG_FAN_EXP(nr));
}
for (nr = 0; nr < 4; nr++) {
data->in_max[nr] =
f75375_read8(client, F75375_REG_VOLT_HIGH(nr));
data->in_min[nr] =
f75375_read8(client, F75375_REG_VOLT_LOW(nr));
}
data->fan_timer = f75375_read8(client, F75375_REG_FAN_TIMER);
data->last_limits = jiffies;
}
/* Measurement registers cache is refreshed after 2 second */
if (time_after(jiffies, data->last_updated + 2 * HZ)
|| !data->valid) {
for (nr = 0; nr < 2; nr++) {
data->pwm[nr] = f75375_read8(client,
F75375_REG_FAN_PWM_DUTY(nr));
/* assign MSB, therefore shift it by 8 bits */
data->temp11[nr] =
f75375_read8(client, F75375_REG_TEMP(nr)) << 8;
if (data->kind == f75387)
/* merge F75387's temperature LSB (11-bit) */
data->temp11[nr] |=
f75375_read8(client,
F75387_REG_TEMP11_LSB(nr));
data->fan[nr] =
f75375_read16(client, F75375_REG_FAN(nr));
}
for (nr = 0; nr < 4; nr++)
data->in[nr] =
f75375_read8(client, F75375_REG_VOLT(nr));
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return data;
}
static inline u16 rpm_from_reg(u16 reg)
{
if (reg == 0 || reg == 0xffff)
return 0;
return 1500000 / reg;
}
static inline u16 rpm_to_reg(int rpm)
{
if (rpm < 367 || rpm > 0xffff)
return 0xffff;
return 1500000 / rpm;
}
static bool duty_mode_enabled(u8 pwm_enable)
{
switch (pwm_enable) {
case 0: /* Manual, duty mode (full speed) */
case 1: /* Manual, duty mode */
case 4: /* Auto, duty mode */
return true;
case 2: /* Auto, speed mode */
case 3: /* Manual, speed mode */
return false;
default:
WARN(1, "Unexpected pwm_enable value %d\n", pwm_enable);
return true;
}
}
static bool auto_mode_enabled(u8 pwm_enable)
{
switch (pwm_enable) {
case 0: /* Manual, duty mode (full speed) */
case 1: /* Manual, duty mode */
case 3: /* Manual, speed mode */
return false;
case 2: /* Auto, speed mode */
case 4: /* Auto, duty mode */
return true;
default:
WARN(1, "Unexpected pwm_enable value %d\n", pwm_enable);
return false;
}
}
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
mutex_lock(&data->update_lock);
data->fan_min[nr] = rpm_to_reg(val);
f75375_write16(client, F75375_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_fan_target(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
if (auto_mode_enabled(data->pwm_enable[nr]))
return -EINVAL;
if (data->kind == f75387 && duty_mode_enabled(data->pwm_enable[nr]))
return -EINVAL;
mutex_lock(&data->update_lock);
data->fan_target[nr] = rpm_to_reg(val);
f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_target[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
if (auto_mode_enabled(data->pwm_enable[nr]) ||
!duty_mode_enabled(data->pwm_enable[nr]))
return -EINVAL;
mutex_lock(&data->update_lock);
data->pwm[nr] = clamp_val(val, 0, 255);
f75375_write_pwm(client, nr);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
*attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", data->pwm_enable[nr]);
}
static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
{
struct f75375_data *data = i2c_get_clientdata(client);
u8 fanmode;
if (val < 0 || val > 4)
return -EINVAL;
fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
if (data->kind == f75387) {
/* For now, deny dangerous toggling of duty mode */
if (duty_mode_enabled(data->pwm_enable[nr]) !=
duty_mode_enabled(val))
return -EOPNOTSUPP;
/* clear each fanX_mode bit before setting them properly */
fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr));
fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr));
switch (val) {
case 0: /* full speed */
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
data->pwm[nr] = 255;
break;
case 1: /* PWM */
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
break;
case 2: /* Automatic, speed mode */
break;
case 3: /* fan speed */
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
break;
case 4: /* Automatic, pwm */
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
break;
}
} else {
/* clear each fanX_mode bit before setting them properly */
fanmode &= ~(3 << FAN_CTRL_MODE(nr));
switch (val) {
case 0: /* full speed */
fanmode |= (3 << FAN_CTRL_MODE(nr));
data->pwm[nr] = 255;
break;
case 1: /* PWM */
fanmode |= (3 << FAN_CTRL_MODE(nr));
break;
case 2: /* AUTOMATIC*/
fanmode |= (1 << FAN_CTRL_MODE(nr));
break;
case 3: /* fan speed */
break;
case 4: /* Automatic pwm */
return -EINVAL;
}
}
f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
data->pwm_enable[nr] = val;
if (val == 0)
f75375_write_pwm(client, nr);
return 0;
}
static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
mutex_lock(&data->update_lock);
err = set_pwm_enable_direct(client, nr, val);
mutex_unlock(&data->update_lock);
return err ? err : count;
}
static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
unsigned long val;
int err;
u8 conf;
char reg, ctrl;
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
if (!(val == 0 || val == 1))
return -EINVAL;
/* F75373 does not support DC (linear voltage) fan control mode */
if (data->kind == f75373 && val == 0)
return -EINVAL;
/* take care for different registers */
if (data->kind == f75387) {
reg = F75375_REG_FAN_TIMER;
ctrl = F75387_FAN_CTRL_LINEAR(nr);
} else {
reg = F75375_REG_CONFIG1;
ctrl = F75375_FAN_CTRL_LINEAR(nr);
}
mutex_lock(&data->update_lock);
conf = f75375_read8(client, reg);
conf &= ~(1 << ctrl);
if (val == 0)
conf |= (1 << ctrl);
f75375_write8(client, reg, conf);
data->pwm_mode[nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm(struct device *dev, struct device_attribute
*attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", data->pwm[nr]);
}
static ssize_t show_pwm_mode(struct device *dev, struct device_attribute
*attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", data->pwm_mode[nr]);
}
#define VOLT_FROM_REG(val) ((val) * 8)
#define VOLT_TO_REG(val) ((val) / 8)
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in[nr]));
}
static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_max[nr]));
}
static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_min[nr]));
}
static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
val = clamp_val(VOLT_TO_REG(val), 0, 0xff);
mutex_lock(&data->update_lock);
data->in_max[nr] = val;
f75375_write8(client, F75375_REG_VOLT_HIGH(nr), data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
val = clamp_val(VOLT_TO_REG(val), 0, 0xff);
mutex_lock(&data->update_lock);
data->in_min[nr] = val;
f75375_write8(client, F75375_REG_VOLT_LOW(nr), data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
#define TEMP_FROM_REG(val) ((val) * 1000)
#define TEMP_TO_REG(val) ((val) / 1000)
#define TEMP11_FROM_REG(reg) ((reg) / 32 * 125)
static ssize_t show_temp11(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[nr]));
}
static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
}
static ssize_t show_temp_max_hyst(struct device *dev,
struct device_attribute *attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[nr]));
}
static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
val = clamp_val(TEMP_TO_REG(val), 0, 127);
mutex_lock(&data->update_lock);
data->temp_high[nr] = val;
f75375_write8(client, F75375_REG_TEMP_HIGH(nr), data->temp_high[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_temp_max_hyst(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
val = clamp_val(TEMP_TO_REG(val), 0, 127);
mutex_lock(&data->update_lock);
data->temp_max_hyst[nr] = val;
f75375_write8(client, F75375_REG_TEMP_HYST(nr),
data->temp_max_hyst[nr]);
mutex_unlock(&data->update_lock);
return count;
}
#define show_fan(thing) \
static ssize_t show_##thing(struct device *dev, struct device_attribute *attr, \
char *buf)\
{\
int nr = to_sensor_dev_attr(attr)->index;\
struct f75375_data *data = f75375_update_device(dev); \
return sprintf(buf, "%d\n", rpm_from_reg(data->thing[nr])); \
}
show_fan(fan);
show_fan(fan_min);
show_fan(fan_max);
show_fan(fan_target);
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO|S_IWUSR,
show_in_max, set_in_max, 0);
static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO|S_IWUSR,
show_in_min, set_in_min, 0);
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO|S_IWUSR,
show_in_max, set_in_max, 1);
static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO|S_IWUSR,
show_in_min, set_in_min, 1);
static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO|S_IWUSR,
show_in_max, set_in_max, 2);
static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO|S_IWUSR,
show_in_min, set_in_min, 2);
static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR,
show_in_max, set_in_max, 3);
static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR,
show_in_min, set_in_min, 3);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp11, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR,
show_temp_max_hyst, set_temp_max_hyst, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR,
show_temp_max, set_temp_max, 0);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 1);
static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR,
show_temp_max_hyst, set_temp_max_hyst, 1);
static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR,
show_temp_max, set_temp_max, 1);
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO, show_fan_max, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO|S_IWUSR,
show_fan_min, set_fan_min, 0);
static SENSOR_DEVICE_ATTR(fan1_target, S_IRUGO|S_IWUSR,
show_fan_target, set_fan_target, 0);
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
static SENSOR_DEVICE_ATTR(fan2_max, S_IRUGO, show_fan_max, NULL, 1);
static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO|S_IWUSR,
show_fan_min, set_fan_min, 1);
static SENSOR_DEVICE_ATTR(fan2_target, S_IRUGO|S_IWUSR,
show_fan_target, set_fan_target, 1);
static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR,
show_pwm, set_pwm, 0);
static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR,
show_pwm_enable, set_pwm_enable, 0);
static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO,
show_pwm_mode, set_pwm_mode, 0);
static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR,
show_pwm, set_pwm, 1);
static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR,
show_pwm_enable, set_pwm_enable, 1);
static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO,
show_pwm_mode, set_pwm_mode, 1);
static struct attribute *f75375_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_max.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_target.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan2_max.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan2_target.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
&sensor_dev_attr_pwm2_mode.dev_attr.attr,
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in0_max.dev_attr.attr,
&sensor_dev_attr_in0_min.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
&sensor_dev_attr_in1_min.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in2_max.dev_attr.attr,
&sensor_dev_attr_in2_min.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in3_max.dev_attr.attr,
&sensor_dev_attr_in3_min.dev_attr.attr,
NULL
};
static const struct attribute_group f75375_group = {
.attrs = f75375_attributes,
};
static void f75375_init(struct i2c_client *client, struct f75375_data *data,
struct f75375s_platform_data *f75375s_pdata)
{
int nr;
if (!f75375s_pdata) {
u8 conf, mode;
int nr;
conf = f75375_read8(client, F75375_REG_CONFIG1);
mode = f75375_read8(client, F75375_REG_FAN_TIMER);
for (nr = 0; nr < 2; nr++) {
if (data->kind == f75387) {
bool manu, duty;
if (!(mode & (1 << F75387_FAN_CTRL_LINEAR(nr))))
data->pwm_mode[nr] = 1;
manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1);
duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1);
if (!manu && duty)
/* auto, pwm */
data->pwm_enable[nr] = 4;
else if (manu && !duty)
/* manual, speed */
data->pwm_enable[nr] = 3;
else if (!manu && !duty)
/* automatic, speed */
data->pwm_enable[nr] = 2;
else
/* manual, pwm */
data->pwm_enable[nr] = 1;
} else {
if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr))))
data->pwm_mode[nr] = 1;
switch ((mode >> FAN_CTRL_MODE(nr)) & 3) {
case 0: /* speed */
data->pwm_enable[nr] = 3;
break;
case 1: /* automatic */
data->pwm_enable[nr] = 2;
break;
default: /* manual */
data->pwm_enable[nr] = 1;
break;
}
}
}
return;
}
set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]);
set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]);
for (nr = 0; nr < 2; nr++) {
if (auto_mode_enabled(f75375s_pdata->pwm_enable[nr]) ||
!duty_mode_enabled(f75375s_pdata->pwm_enable[nr]))
continue;
data->pwm[nr] = clamp_val(f75375s_pdata->pwm[nr], 0, 255);
f75375_write_pwm(client, nr);
}
}
static int f75375_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct f75375_data *data;
struct f75375s_platform_data *f75375s_pdata =
dev_get_platdata(&client->dev);
int err;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
data = devm_kzalloc(&client->dev, sizeof(struct f75375_data),
GFP_KERNEL);
if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
data->kind = id->driver_data;
err = sysfs_create_group(&client->dev.kobj, &f75375_group);
if (err)
return err;
if (data->kind != f75373) {
err = sysfs_chmod_file(&client->dev.kobj,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
S_IRUGO | S_IWUSR);
if (err)
goto exit_remove;
err = sysfs_chmod_file(&client->dev.kobj,
&sensor_dev_attr_pwm2_mode.dev_attr.attr,
S_IRUGO | S_IWUSR);
if (err)
goto exit_remove;
}
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
f75375_init(client, data, f75375s_pdata);
return 0;
exit_remove:
sysfs_remove_group(&client->dev.kobj, &f75375_group);
return err;
}
static int f75375_remove(struct i2c_client *client)
{
struct f75375_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &f75375_group);
return 0;
}
/* Return 0 if detection is successful, -ENODEV otherwise */
static int f75375_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
u16 vendid, chipid;
u8 version;
const char *name;
vendid = f75375_read16(client, F75375_REG_VENDOR);
chipid = f75375_read16(client, F75375_CHIP_ID);
if (vendid != 0x1934)
return -ENODEV;
if (chipid == 0x0306)
name = "f75375";
else if (chipid == 0x0204)
name = "f75373";
else if (chipid == 0x0410)
name = "f75387";
else
return -ENODEV;
version = f75375_read8(client, F75375_REG_VERSION);
dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
module_i2c_driver(f75375_driver);
MODULE_AUTHOR("Riku Voipio");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("F75373/F75375/F75387 hardware monitoring driver");