mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-04 16:15:11 +00:00
Code Issues Releases Wiki Activity
linux-stable/arch/arm/mach-sa1100/collie.c
Russell King 65f2e753f1 Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus." 
This reverts commit 5dd7bf59e0.

Conflicts:

	scripts/mod/file2alias.c

This change is wrong on many levels.  First and foremost, it causes a
regression.  On boot on Assabet, which this patch gives a codec id of
'ucb1x00', it gives:

	ucb1x00 ID not found: 1005

0x1005 is a valid ID for the UCB1300 device.

Secondly, this patch is way over the top in terms of complexity.  The
only device which has been seen to be connected with this MCP code is
the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same
driver.  Adding a match table, requiring the codec string to match the
hardware ID read out of the ID register, etc is completely over the top
when we can just read the hardware ID register.
2012-01-20 17:38:58 +00:00

391 lines
8.7 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-sa1100/collie.c
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* This file contains all Collie-specific tweaks.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* ChangeLog:
* 2006 Pavel Machek <pavel@ucw.cz>
* 03-06-2004 John Lenz <lenz@cs.wisc.edu>
* 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
* 04-16-2001 Lineo Japan,Inc. ...
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
#include <linux/gpio.h>
#include <linux/pda_power.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <mach/collie.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/locomo.h>
#include <mach/mcp.h>
#include "generic.h"
static struct resource collie_scoop_resources[] = {
[0] = {
.start = 0x40800000,
.end = 0x40800fff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config collie_scoop_setup = {
.io_dir = COLLIE_SCOOP_IO_DIR,
.io_out = COLLIE_SCOOP_IO_OUT,
.gpio_base = COLLIE_SCOOP_GPIO_BASE,
};
struct platform_device colliescoop_device = {
.name = "sharp-scoop",
.id = -1,
.dev = {
.platform_data = &collie_scoop_setup,
},
.num_resources = ARRAY_SIZE(collie_scoop_resources),
.resource = collie_scoop_resources,
};
static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
{
.dev = &colliescoop_device.dev,
.irq = COLLIE_IRQ_GPIO_CF_IRQ,
.cd_irq = COLLIE_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},
};
static struct scoop_pcmcia_config collie_pcmcia_config = {
.devs = &collie_pcmcia_scoop[0],
.num_devs = 1,
};
static struct mcp_plat_data collie_mcp_data = {
.mccr0 = MCCR0_ADM | MCCR0_ExtClk,
.sclk_rate = 9216000,
.gpio_base = COLLIE_TC35143_GPIO_BASE,
};
/*
* Collie AC IN
*/
static int collie_power_init(struct device *dev)
{
int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
if (ret)
goto err_gpio_req;
ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
if (ret)
goto err_gpio_in;
return 0;
err_gpio_in:
gpio_free(COLLIE_GPIO_AC_IN);
err_gpio_req:
return ret;
}
static void collie_power_exit(struct device *dev)
{
gpio_free(COLLIE_GPIO_AC_IN);
}
static int collie_power_ac_online(void)
{
return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
}
static char *collie_ac_supplied_to[] = {
"main-battery",
"backup-battery",
};
static struct pda_power_pdata collie_power_data = {
.init = collie_power_init,
.is_ac_online = collie_power_ac_online,
.exit = collie_power_exit,
.supplied_to = collie_ac_supplied_to,
.num_supplicants = ARRAY_SIZE(collie_ac_supplied_to),
};
static struct resource collie_power_resource[] = {
{
.name = "ac",
.start = gpio_to_irq(COLLIE_GPIO_AC_IN),
.end = gpio_to_irq(COLLIE_GPIO_AC_IN),
.flags = IORESOURCE_IRQ |
IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
};
static struct platform_device collie_power_device = {
.name = "pda-power",
.id = -1,
.dev.platform_data = &collie_power_data,
.resource = collie_power_resource,
.num_resources = ARRAY_SIZE(collie_power_resource),
};
#ifdef CONFIG_SHARP_LOCOMO
/*
* low-level UART features.
*/
struct platform_device collie_locomo_device;
static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
{
if (mctrl & TIOCM_RTS)
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
else
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
if (mctrl & TIOCM_DTR)
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
else
locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
}
static u_int collie_uart_get_mctrl(struct uart_port *port)
{
int ret = TIOCM_CD;
unsigned int r;
r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
if (r == -ENODEV)
return ret;
if (r & LOCOMO_GPIO_CTS)
ret |= TIOCM_CTS;
if (r & LOCOMO_GPIO_DSR)
ret |= TIOCM_DSR;
return ret;
}
static struct sa1100_port_fns collie_port_fns __initdata = {
.set_mctrl = collie_uart_set_mctrl,
.get_mctrl = collie_uart_get_mctrl,
};
static int collie_uart_probe(struct locomo_dev *dev)
{
return 0;
}
static int collie_uart_remove(struct locomo_dev *dev)
{
return 0;
}
static struct locomo_driver collie_uart_driver = {
.drv = {
.name = "collie_uart",
},
.devid = LOCOMO_DEVID_UART,
.probe = collie_uart_probe,
.remove = collie_uart_remove,
};
static int __init collie_uart_init(void)
{
return locomo_driver_register(&collie_uart_driver);
}
device_initcall(collie_uart_init);
#endif
static struct resource locomo_resources[] = {
[0] = {
.start = 0x40000000,
.end = 0x40001fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_GPIO25,
.end = IRQ_GPIO25,
.flags = IORESOURCE_IRQ,
},
};
static struct locomo_platform_data locomo_info = {
.irq_base = IRQ_BOARD_START,
};
struct platform_device collie_locomo_device = {
.name = "locomo",
.id = 0,
.dev = {
.platform_data = &locomo_info,
},
.num_resources = ARRAY_SIZE(locomo_resources),
.resource = locomo_resources,
};
static struct platform_device *devices[] __initdata = {
&collie_locomo_device,
&colliescoop_device,
&collie_power_device,
};
static struct mtd_partition collie_partitions[] = {
{
.name = "bootloader",
.offset = 0,
.size = 0x000C0000,
.mask_flags = MTD_WRITEABLE
}, {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = 0x00100000,
}, {
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = 0x00e20000,
}
};
static int collie_flash_init(void)
{
int rc = gpio_request(COLLIE_GPIO_VPEN, "flash Vpp enable");
if (rc)
return rc;
rc = gpio_direction_output(COLLIE_GPIO_VPEN, 1);
if (rc)
gpio_free(COLLIE_GPIO_VPEN);
return rc;
}
static void collie_set_vpp(int vpp)
{
gpio_set_value(COLLIE_GPIO_VPEN, vpp);
}
static void collie_flash_exit(void)
{
gpio_free(COLLIE_GPIO_VPEN);
}
static struct flash_platform_data collie_flash_data = {
.map_name = "cfi_probe",
.init = collie_flash_init,
.set_vpp = collie_set_vpp,
.exit = collie_flash_exit,
.parts = collie_partitions,
.nr_parts = ARRAY_SIZE(collie_partitions),
};
static struct resource collie_flash_resources[] = {
{
.start = SA1100_CS0_PHYS,
.end = SA1100_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}
};
static void __init collie_init(void)
{
int ret = 0;
/* cpu initialize */
GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
GPIO_MCP_CLK | GPIO_32_768kHz;
GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
_COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
_COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
_COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
PGSR = _COLLIE_GPIO_nREMOCON_ON;
PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
PCFR = PCFR_OPDE;
GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
platform_scoop_config = &collie_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
}
sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
ARRAY_SIZE(collie_flash_resources));
sa11x0_register_mcp(&collie_mcp_data);
sharpsl_save_param();
}
static struct map_desc collie_io_desc[] __initdata = {
{ /* 32M main flash (cs0) */
.virtual = 0xe8000000,
.pfn = __phys_to_pfn(0x00000000),
.length = 0x02000000,
.type = MT_DEVICE
}, { /* 32M boot flash (cs1) */
.virtual = 0xea000000,
.pfn = __phys_to_pfn(0x08000000),
.length = 0x02000000,
.type = MT_DEVICE
}
};
static void __init collie_map_io(void)
{
sa1100_map_io();
iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
#ifdef CONFIG_SHARP_LOCOMO
sa1100_register_uart_fns(&collie_port_fns);
#endif
sa1100_register_uart(0, 3);
sa1100_register_uart(1, 1);
}
MACHINE_START(COLLIE, "Sharp-Collie")
.map_io = collie_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = collie_init,
.restart = sa11x0_restart,
MACHINE_END
Reference in a new issue View git blame Copy permalink