linux-stable/include/linux/usb/isp1301.h
Christophe JAILLET e3fa404a26 USB: Follow-up to SPDX identifiers addition - remove now useless comments
All these files have been updated in the commit given in the Fixes: tag
below.

When the SPDX-License-Identifier: has been added, the corresponding text at
the beginning of the files has not been deleted.
All these texts are about GPL-2.0, with different variation in the wording.

Remove these now useless lines to save some LoC.

Fixes: 5fd54ace47 ("USB: add SPDX identifiers to all remaining files in drivers/usb/")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 11:24:36 +02:00

71 lines
1.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* NXP ISP1301 USB transceiver driver
*
* Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
*/
#ifndef __LINUX_USB_ISP1301_H
#define __LINUX_USB_ISP1301_H
#include <linux/of.h>
/* I2C Register definitions: */
#define ISP1301_I2C_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
#define MC1_SPEED_REG (1 << 0)
#define MC1_SUSPEND_REG (1 << 1)
#define MC1_DAT_SE0 (1 << 2)
#define MC1_TRANSPARENT (1 << 3)
#define MC1_BDIS_ACON_EN (1 << 4)
#define MC1_OE_INT_EN (1 << 5)
#define MC1_UART_EN (1 << 6)
#define MC1_MASK 0x7f
#define ISP1301_I2C_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
#define MC2_GLOBAL_PWR_DN (1 << 0)
#define MC2_SPD_SUSP_CTRL (1 << 1)
#define MC2_BI_DI (1 << 2)
#define MC2_TRANSP_BDIR0 (1 << 3)
#define MC2_TRANSP_BDIR1 (1 << 4)
#define MC2_AUDIO_EN (1 << 5)
#define MC2_PSW_EN (1 << 6)
#define MC2_EN2V7 (1 << 7)
#define ISP1301_I2C_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
#define OTG1_DP_PULLUP (1 << 0)
#define OTG1_DM_PULLUP (1 << 1)
#define OTG1_DP_PULLDOWN (1 << 2)
#define OTG1_DM_PULLDOWN (1 << 3)
#define OTG1_ID_PULLDOWN (1 << 4)
#define OTG1_VBUS_DRV (1 << 5)
#define OTG1_VBUS_DISCHRG (1 << 6)
#define OTG1_VBUS_CHRG (1 << 7)
#define ISP1301_I2C_OTG_CONTROL_2 0x10 /* u8 readonly */
#define OTG_B_SESS_END (1 << 6)
#define OTG_B_SESS_VLD (1 << 7)
#define ISP1301_I2C_INTERRUPT_SOURCE 0x8
#define ISP1301_I2C_INTERRUPT_LATCH 0xA
#define ISP1301_I2C_INTERRUPT_FALLING 0xC
#define ISP1301_I2C_INTERRUPT_RISING 0xE
#define INT_VBUS_VLD (1 << 0)
#define INT_SESS_VLD (1 << 1)
#define INT_DP_HI (1 << 2)
#define INT_ID_GND (1 << 3)
#define INT_DM_HI (1 << 4)
#define INT_ID_FLOAT (1 << 5)
#define INT_BDIS_ACON (1 << 6)
#define INT_CR_INT (1 << 7)
#define ISP1301_I2C_REG_CLEAR_ADDR 1 /* Register Address Modifier */
struct i2c_client *isp1301_get_client(struct device_node *node);
#endif /* __LINUX_USB_ISP1301_H */