mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-04 01:49:36 +00:00
No description
![]() Support for Samsung Galaxy E5, E7 and Grand Max is added, with support for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value Edition gains magnetometer support. MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs. On SA8295P ADP problems arising from regulators being switched into low-power mode is worked around by removing this ability, for now. The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC related updates are introduced. On SC7280 support for the CPU and LLC bwmon instances are introduced. Soundwire, audio codecs and sound introduced for a variety of boards. Using required-opps the USB controllers votes for a minimum corner on VDD_CX. The onboard USB Hub Herobrine is described. A new board, the Google Evoker is added, as is another revision of Herobrine Villager. On SC8280XP the USB controllers are marked as wakeup-sources, to keep them powered during suspend. The CRD has HID devices marked as wakeup-sources to enable resuming the system. In addition to these changes the alternative touchpad is introduced on the Lenovo ThinkPad X13s. SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350 interconnect providers and GPI DMA is introduced. A description of the PM7280b PMIC is added to Fairphone FP4 on SM7225. With the multi-MSI support added in the PCIe controller, SM8250 gets all its MSI interrupts added. UFS ICE and the second SDHCI controller is introduced on SM8450. Support for the Sony Xperia 1 IV is introduced. Throughout a variety of platforms the TCSR mutex syscon is replaced with the MMIO-based binding. TCSR nodes gained proper compatibles and halt syscon nodes are split out from the mutex ranges. A range of fixes to align with DT bindings are introduced. Among these are the changes to the follow the TLMM binding and suffix pinctrl states with -state and subnodes thereof with -pins, another is a number of changes transitioning to use -gpios and introduction of proper parent clock references in various clock providers. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmMrosIVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FCkkP/iuTNOUwcpz03IijhJJILfUF1aSS o7UAadfYj4dKqvc9BGdq+A9OSDqaMmceXwbPWYZQONpHrSNVMIUxUevtrUAxOxYj fEf4VLRk2AJ2GqtRasqQL7WOESPS1bD7rRyNg5nFD3urTTqXjkgC9XoYQk9uufPx hLdFeEB672pi0HWiQIgk5iL36O6OEEeK6rl0/PF1y8N8GkYVln1XD7SKNs2tsDcM 0unclymdckPbhxq1tuuRWXhCUZlOWRUP8+89L14M+HT3RrtudnJ8v2jtgygtziPS TZ+wJa2CMcIZCgQ7kBcORSiMquIHV4bGcq5UNAX0juU2CFIFIQu+VzStT80+6SsU ATkJSl4GKw/HuJS4W0JLk73mLIhtEhqIfR7qFfiDjhGphbgRkTEdMtqG5WIKzf7D 3ourD0qs3IC+XmtkjnTykJZam9BYNFt99QBHdsjZq37rMvll7BKtEPdrKIKmzzzY hqOv27Bt4cp2xgZ6Hoot/oSfCOSQffcHPuDzkrfsinM0ZEeDLpMW7ynIQDvw08Fs 2OMbhbP3c/onhoaEuLp9eLt+ghV58PkNvKPcWBma5oNCDvi84CRDU8HOGLbnmeDv 4haXe/Ib3OoT4+raCLYrY5fI3lf2CG9cLQVHs02apilKUQ7HiMLeH3L6vNpH9v0g BXpu2rG+gbAgJzgH =XT9N -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMtxHsACgkQmmx57+YA GNnDbw/7BIQIOXFkx6xb5dJbfxAs9EGlPngcgUGWHMUZ166Q+e+nGCUMiDtekLrC E07g05dPO2oaS2XtcHYVQmaR+Sq9SQYb1nFE6P1kvHmz0SxueR8fDpUheFn4IunP OCcyPoKGar72HcFh/v2r9SdJgVAEQ6bYvNzwJN2qqMQRW5fMHUBlJtcMumGNyg/0 MNzoSvmx/s2sL6yf6xVt7kqerl/7szFF13PnbWlUEnDhbZUHoOh5VYt2Xxpp9rjX M09iM/mOkyms7ngcU9m+izYAg+aVeDBSynoyhqQUlrDwbFu83TQ+jFSp0MkJrSiQ RHJSBNnXx9wmJuox/A2ZBUmMcjqaizz4ciXXVu5t7xP8wFKQZRfblCX1+B2G0qSu 1rqxBqGrVEzRanoZjpMCSrObSjD/t1wIpTN5hqvpEoR3nXWRFzLOIQjXyIkKVZ4p ePc8Et1yYlQqv7S3GS12jLy8s/sKxOk0sTAzWuTavT+QrgJVDZScaSU9t9hhk4tC HRlwHBag0nallJcz+gnmbG56f0zcVsvOHnMV+OBFA4wHInlVS+A+Rt0TouqjEiAo IlVCXlO24jgsZi/x6ZwVboIBYzPLsaOmsr5Tg9Dua494/U+Im23qCFBvRGHiEoBe tAyCAsYSLNsOhgjxC/tFVOQJOmlw+moerBpZNcu2XMG/aXLHwMA= =ZHbe -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM64 DTS updates for 6.1 Support for Samsung Galaxy E5, E7 and Grand Max is added, with support for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value Edition gains magnetometer support. MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs. On SA8295P ADP problems arising from regulators being switched into low-power mode is worked around by removing this ability, for now. The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC related updates are introduced. On SC7280 support for the CPU and LLC bwmon instances are introduced. Soundwire, audio codecs and sound introduced for a variety of boards. Using required-opps the USB controllers votes for a minimum corner on VDD_CX. The onboard USB Hub Herobrine is described. A new board, the Google Evoker is added, as is another revision of Herobrine Villager. On SC8280XP the USB controllers are marked as wakeup-sources, to keep them powered during suspend. The CRD has HID devices marked as wakeup-sources to enable resuming the system. In addition to these changes the alternative touchpad is introduced on the Lenovo ThinkPad X13s. SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350 interconnect providers and GPI DMA is introduced. A description of the PM7280b PMIC is added to Fairphone FP4 on SM7225. With the multi-MSI support added in the PCIe controller, SM8250 gets all its MSI interrupts added. UFS ICE and the second SDHCI controller is introduced on SM8450. Support for the Sony Xperia 1 IV is introduced. Throughout a variety of platforms the TCSR mutex syscon is replaced with the MMIO-based binding. TCSR nodes gained proper compatibles and halt syscon nodes are split out from the mutex ranges. A range of fixes to align with DT bindings are introduced. Among these are the changes to the follow the TLMM binding and suffix pinctrl states with -state and subnodes thereof with -pins, another is a number of changes transitioning to use -gpios and introduction of proper parent clock references in various clock providers. * tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits) arm64: dts: qcom: sc7280: Add required-opps for USB arm64: dts: qcom: sm8450: fix UFS PHY serdes size arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings arm64: dts: qcom: pmi8994: add missing MPP compatible fallback dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub arm64: dts: qcom: align SDHCI reg-names with DT schema arm64: dts: qcom: sm8250: provide additional MSI interrupts arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node arm64: dts: qcom: Use WCD9335 DT bindings arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO ... Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
---|---|---|
arch | ||
block | ||
certs | ||
crypto | ||
Documentation | ||
drivers | ||
fs | ||
include | ||
init | ||
io_uring | ||
ipc | ||
kernel | ||
lib | ||
LICENSES | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.clang-format | ||
.cocciconfig | ||
.get_maintainer.ignore | ||
.gitattributes | ||
.gitignore | ||
.mailmap | ||
COPYING | ||
CREDITS | ||
Kbuild | ||
Kconfig | ||
MAINTAINERS | ||
Makefile | ||
README |
Linux kernel ============ There are several guides for kernel developers and users. These guides can be rendered in a number of formats, like HTML and PDF. Please read Documentation/admin-guide/README.rst first. In order to build the documentation, use ``make htmldocs`` or ``make pdfdocs``. The formatted documentation can also be read online at: https://www.kernel.org/doc/html/latest/ There are various text files in the Documentation/ subdirectory, several of them using the Restructured Text markup notation. Please read the Documentation/process/changes.rst file, as it contains the requirements for building and running the kernel, and information about the problems which may result by upgrading your kernel.