mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-24 01:41:39 +00:00
![Linus Torvalds](/assets/img/avatar_default.png)
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
576 lines
16 KiB
C
576 lines
16 KiB
C
/*****************************************************************************/
|
|
|
|
/*
|
|
* baycom_par.c -- baycom par96 and picpar radio modem driver.
|
|
*
|
|
* Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Please note that the GPL allows you to use the driver, NOT the radio.
|
|
* In order to use the radio, you need a license from the communications
|
|
* authority of your country.
|
|
*
|
|
*
|
|
* Supported modems
|
|
*
|
|
* par96: This is a modem for 9600 baud FSK compatible to the G3RUH standard.
|
|
* The modem does all the filtering and regenerates the receiver clock.
|
|
* Data is transferred from and to the PC via a shift register.
|
|
* The shift register is filled with 16 bits and an interrupt is
|
|
* signalled. The PC then empties the shift register in a burst. This
|
|
* modem connects to the parallel port, hence the name. The modem
|
|
* leaves the implementation of the HDLC protocol and the scrambler
|
|
* polynomial to the PC. This modem is no longer available (at least
|
|
* from Baycom) and has been replaced by the PICPAR modem (see below).
|
|
* You may however still build one from the schematics published in
|
|
* cq-DL :-).
|
|
*
|
|
* picpar: This is a redesign of the par96 modem by Henning Rech, DF9IC. The
|
|
* modem is protocol compatible to par96, but uses only three low
|
|
* power ICs and can therefore be fed from the parallel port and
|
|
* does not require an additional power supply. It features
|
|
* built in DCD circuitry. The driver should therefore be configured
|
|
* for hardware DCD.
|
|
*
|
|
*
|
|
* Command line options (insmod command line)
|
|
*
|
|
* mode driver mode string. Valid choices are par96 and picpar.
|
|
* iobase base address of the port; common values are 0x378, 0x278, 0x3bc
|
|
*
|
|
*
|
|
* History:
|
|
* 0.1 26.06.1996 Adapted from baycom.c and made network driver interface
|
|
* 18.10.1996 Changed to new user space access routines (copy_{to,from}_user)
|
|
* 0.3 26.04.1997 init code/data tagged
|
|
* 0.4 08.07.1997 alternative ser12 decoding algorithm (uses delta CTS ints)
|
|
* 0.5 11.11.1997 split into separate files for ser12/par96
|
|
* 0.6 03.08.1999 adapt to Linus' new __setup/__initcall
|
|
* removed some pre-2.2 kernel compatibility cruft
|
|
* 0.7 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts
|
|
* 0.8 12.02.2000 adapted to softnet driver interface
|
|
* removed direct parport access, uses parport driver methods
|
|
* 0.9 03.07.2000 fix interface name handling
|
|
*/
|
|
|
|
/*****************************************************************************/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/hdlcdrv.h>
|
|
#include <linux/baycom.h>
|
|
#include <linux/parport.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/bug.h>
|
|
#include <asm/system.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
#define BAYCOM_DEBUG
|
|
|
|
/*
|
|
* modem options; bit mask
|
|
*/
|
|
#define BAYCOM_OPTIONS_SOFTDCD 1
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static const char bc_drvname[] = "baycom_par";
|
|
static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
|
|
KERN_INFO "baycom_par: version 0.9 compiled " __TIME__ " " __DATE__ "\n";
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
#define NR_PORTS 4
|
|
|
|
static struct net_device *baycom_device[NR_PORTS];
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
#define PAR96_BURSTBITS 16
|
|
#define PAR96_BURST 4
|
|
#define PAR96_PTT 2
|
|
#define PAR96_TXBIT 1
|
|
#define PAR96_ACK 0x40
|
|
#define PAR96_RXBIT 0x20
|
|
#define PAR96_DCD 0x10
|
|
#define PAR97_POWER 0xf8
|
|
|
|
/* ---------------------------------------------------------------------- */
|
|
/*
|
|
* Information that need to be kept for each board.
|
|
*/
|
|
|
|
struct baycom_state {
|
|
struct hdlcdrv_state hdrv;
|
|
|
|
struct pardevice *pdev;
|
|
unsigned int options;
|
|
|
|
struct modem_state {
|
|
short arb_divider;
|
|
unsigned char flags;
|
|
unsigned int shreg;
|
|
struct modem_state_par96 {
|
|
int dcd_count;
|
|
unsigned int dcd_shreg;
|
|
unsigned long descram;
|
|
unsigned long scram;
|
|
} par96;
|
|
} modem;
|
|
|
|
#ifdef BAYCOM_DEBUG
|
|
struct debug_vals {
|
|
unsigned long last_jiffies;
|
|
unsigned cur_intcnt;
|
|
unsigned last_intcnt;
|
|
int cur_pllcorr;
|
|
int last_pllcorr;
|
|
} debug_vals;
|
|
#endif /* BAYCOM_DEBUG */
|
|
};
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static void __inline__ baycom_int_freq(struct baycom_state *bc)
|
|
{
|
|
#ifdef BAYCOM_DEBUG
|
|
unsigned long cur_jiffies = jiffies;
|
|
/*
|
|
* measure the interrupt frequency
|
|
*/
|
|
bc->debug_vals.cur_intcnt++;
|
|
if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
|
|
bc->debug_vals.last_jiffies = cur_jiffies;
|
|
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
|
|
bc->debug_vals.cur_intcnt = 0;
|
|
bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
|
|
bc->debug_vals.cur_pllcorr = 0;
|
|
}
|
|
#endif /* BAYCOM_DEBUG */
|
|
}
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
/*
|
|
* ===================== PAR96 specific routines =========================
|
|
*/
|
|
|
|
#define PAR96_DESCRAM_TAP1 0x20000
|
|
#define PAR96_DESCRAM_TAP2 0x01000
|
|
#define PAR96_DESCRAM_TAP3 0x00001
|
|
|
|
#define PAR96_DESCRAM_TAPSH1 17
|
|
#define PAR96_DESCRAM_TAPSH2 12
|
|
#define PAR96_DESCRAM_TAPSH3 0
|
|
|
|
#define PAR96_SCRAM_TAP1 0x20000 /* X^17 */
|
|
#define PAR96_SCRAM_TAPN 0x00021 /* X^0+X^5 */
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static __inline__ void par96_tx(struct net_device *dev, struct baycom_state *bc)
|
|
{
|
|
int i;
|
|
unsigned int data = hdlcdrv_getbits(&bc->hdrv);
|
|
struct parport *pp = bc->pdev->port;
|
|
|
|
for(i = 0; i < PAR96_BURSTBITS; i++, data >>= 1) {
|
|
unsigned char val = PAR97_POWER;
|
|
bc->modem.par96.scram = ((bc->modem.par96.scram << 1) |
|
|
(bc->modem.par96.scram & 1));
|
|
if (!(data & 1))
|
|
bc->modem.par96.scram ^= 1;
|
|
if (bc->modem.par96.scram & (PAR96_SCRAM_TAP1 << 1))
|
|
bc->modem.par96.scram ^=
|
|
(PAR96_SCRAM_TAPN << 1);
|
|
if (bc->modem.par96.scram & (PAR96_SCRAM_TAP1 << 2))
|
|
val |= PAR96_TXBIT;
|
|
pp->ops->write_data(pp, val);
|
|
pp->ops->write_data(pp, val | PAR96_BURST);
|
|
}
|
|
}
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static __inline__ void par96_rx(struct net_device *dev, struct baycom_state *bc)
|
|
{
|
|
int i;
|
|
unsigned int data, mask, mask2, descx;
|
|
struct parport *pp = bc->pdev->port;
|
|
|
|
/*
|
|
* do receiver; differential decode and descramble on the fly
|
|
*/
|
|
for(data = i = 0; i < PAR96_BURSTBITS; i++) {
|
|
bc->modem.par96.descram = (bc->modem.par96.descram << 1);
|
|
if (pp->ops->read_status(pp) & PAR96_RXBIT)
|
|
bc->modem.par96.descram |= 1;
|
|
descx = bc->modem.par96.descram ^
|
|
(bc->modem.par96.descram >> 1);
|
|
/* now the diff decoded data is inverted in descram */
|
|
pp->ops->write_data(pp, PAR97_POWER | PAR96_PTT);
|
|
descx ^= ((descx >> PAR96_DESCRAM_TAPSH1) ^
|
|
(descx >> PAR96_DESCRAM_TAPSH2));
|
|
data >>= 1;
|
|
if (!(descx & 1))
|
|
data |= 0x8000;
|
|
pp->ops->write_data(pp, PAR97_POWER | PAR96_PTT | PAR96_BURST);
|
|
}
|
|
hdlcdrv_putbits(&bc->hdrv, data);
|
|
/*
|
|
* do DCD algorithm
|
|
*/
|
|
if (bc->options & BAYCOM_OPTIONS_SOFTDCD) {
|
|
bc->modem.par96.dcd_shreg = (bc->modem.par96.dcd_shreg >> 16)
|
|
| (data << 16);
|
|
/* search for flags and set the dcd counter appropriately */
|
|
for(mask = 0x1fe00, mask2 = 0xfc00, i = 0;
|
|
i < PAR96_BURSTBITS; i++, mask <<= 1, mask2 <<= 1)
|
|
if ((bc->modem.par96.dcd_shreg & mask) == mask2)
|
|
bc->modem.par96.dcd_count = HDLCDRV_MAXFLEN+4;
|
|
/* check for abort/noise sequences */
|
|
for(mask = 0x1fe00, mask2 = 0x1fe00, i = 0;
|
|
i < PAR96_BURSTBITS; i++, mask <<= 1, mask2 <<= 1)
|
|
if (((bc->modem.par96.dcd_shreg & mask) == mask2) &&
|
|
(bc->modem.par96.dcd_count >= 0))
|
|
bc->modem.par96.dcd_count -= HDLCDRV_MAXFLEN-10;
|
|
/* decrement and set the dcd variable */
|
|
if (bc->modem.par96.dcd_count >= 0)
|
|
bc->modem.par96.dcd_count -= 2;
|
|
hdlcdrv_setdcd(&bc->hdrv, bc->modem.par96.dcd_count > 0);
|
|
} else {
|
|
hdlcdrv_setdcd(&bc->hdrv, !!(pp->ops->read_status(pp) & PAR96_DCD));
|
|
}
|
|
}
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static void par96_interrupt(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct net_device *dev = (struct net_device *)dev_id;
|
|
struct baycom_state *bc = netdev_priv(dev);
|
|
|
|
baycom_int_freq(bc);
|
|
/*
|
|
* check if transmitter active
|
|
*/
|
|
if (hdlcdrv_ptt(&bc->hdrv))
|
|
par96_tx(dev, bc);
|
|
else {
|
|
par96_rx(dev, bc);
|
|
if (--bc->modem.arb_divider <= 0) {
|
|
bc->modem.arb_divider = 6;
|
|
local_irq_enable();
|
|
hdlcdrv_arbitrate(dev, &bc->hdrv);
|
|
}
|
|
}
|
|
local_irq_enable();
|
|
hdlcdrv_transmitter(dev, &bc->hdrv);
|
|
hdlcdrv_receiver(dev, &bc->hdrv);
|
|
local_irq_disable();
|
|
}
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static void par96_wakeup(void *handle)
|
|
{
|
|
struct net_device *dev = (struct net_device *)handle;
|
|
struct baycom_state *bc = netdev_priv(dev);
|
|
|
|
printk(KERN_DEBUG "baycom_par: %s: why am I being woken up?\n", dev->name);
|
|
if (!parport_claim(bc->pdev))
|
|
printk(KERN_DEBUG "baycom_par: %s: I'm broken.\n", dev->name);
|
|
}
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static int par96_open(struct net_device *dev)
|
|
{
|
|
struct baycom_state *bc = netdev_priv(dev);
|
|
struct parport *pp;
|
|
|
|
if (!dev || !bc)
|
|
return -ENXIO;
|
|
pp = parport_find_base(dev->base_addr);
|
|
if (!pp) {
|
|
printk(KERN_ERR "baycom_par: parport at 0x%lx unknown\n", dev->base_addr);
|
|
return -ENXIO;
|
|
}
|
|
if (pp->irq < 0) {
|
|
printk(KERN_ERR "baycom_par: parport at 0x%lx has no irq\n", pp->base);
|
|
parport_put_port(pp);
|
|
return -ENXIO;
|
|
}
|
|
if ((~pp->modes) & (PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
|
|
printk(KERN_ERR "baycom_par: parport at 0x%lx cannot be used\n", pp->base);
|
|
parport_put_port(pp);
|
|
return -ENXIO;
|
|
}
|
|
memset(&bc->modem, 0, sizeof(bc->modem));
|
|
bc->hdrv.par.bitrate = 9600;
|
|
bc->pdev = parport_register_device(pp, dev->name, NULL, par96_wakeup,
|
|
par96_interrupt, PARPORT_DEV_EXCL, dev);
|
|
parport_put_port(pp);
|
|
if (!bc->pdev) {
|
|
printk(KERN_ERR "baycom_par: cannot register parport at 0x%lx\n", dev->base_addr);
|
|
return -ENXIO;
|
|
}
|
|
if (parport_claim(bc->pdev)) {
|
|
printk(KERN_ERR "baycom_par: parport at 0x%lx busy\n", pp->base);
|
|
parport_unregister_device(bc->pdev);
|
|
return -EBUSY;
|
|
}
|
|
pp = bc->pdev->port;
|
|
dev->irq = pp->irq;
|
|
pp->ops->data_forward(pp);
|
|
bc->hdrv.par.bitrate = 9600;
|
|
pp->ops->write_data(pp, PAR96_PTT | PAR97_POWER); /* switch off PTT */
|
|
pp->ops->enable_irq(pp);
|
|
printk(KERN_INFO "%s: par96 at iobase 0x%lx irq %u options 0x%x\n",
|
|
bc_drvname, dev->base_addr, dev->irq, bc->options);
|
|
return 0;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static int par96_close(struct net_device *dev)
|
|
{
|
|
struct baycom_state *bc = netdev_priv(dev);
|
|
struct parport *pp;
|
|
|
|
if (!dev || !bc)
|
|
return -EINVAL;
|
|
pp = bc->pdev->port;
|
|
/* disable interrupt */
|
|
pp->ops->disable_irq(pp);
|
|
/* switch off PTT */
|
|
pp->ops->write_data(pp, PAR96_PTT | PAR97_POWER);
|
|
parport_release(bc->pdev);
|
|
parport_unregister_device(bc->pdev);
|
|
printk(KERN_INFO "%s: close par96 at iobase 0x%lx irq %u\n",
|
|
bc_drvname, dev->base_addr, dev->irq);
|
|
return 0;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
/*
|
|
* ===================== hdlcdrv driver interface =========================
|
|
*/
|
|
|
|
static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr,
|
|
struct hdlcdrv_ioctl *hi, int cmd);
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static struct hdlcdrv_ops par96_ops = {
|
|
.drvname = bc_drvname,
|
|
.drvinfo = bc_drvinfo,
|
|
.open = par96_open,
|
|
.close = par96_close,
|
|
.ioctl = baycom_ioctl
|
|
};
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static int baycom_setmode(struct baycom_state *bc, const char *modestr)
|
|
{
|
|
if (!strncmp(modestr, "picpar", 6))
|
|
bc->options = 0;
|
|
else if (!strncmp(modestr, "par96", 5))
|
|
bc->options = BAYCOM_OPTIONS_SOFTDCD;
|
|
else
|
|
bc->options = !!strchr(modestr, '*');
|
|
return 0;
|
|
}
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr,
|
|
struct hdlcdrv_ioctl *hi, int cmd)
|
|
{
|
|
struct baycom_state *bc;
|
|
struct baycom_ioctl bi;
|
|
|
|
if (!dev)
|
|
return -EINVAL;
|
|
|
|
bc = netdev_priv(dev);
|
|
BUG_ON(bc->hdrv.magic != HDLCDRV_MAGIC);
|
|
|
|
if (cmd != SIOCDEVPRIVATE)
|
|
return -ENOIOCTLCMD;
|
|
switch (hi->cmd) {
|
|
default:
|
|
break;
|
|
|
|
case HDLCDRVCTL_GETMODE:
|
|
strcpy(hi->data.modename, bc->options ? "par96" : "picpar");
|
|
if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl)))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case HDLCDRVCTL_SETMODE:
|
|
if (netif_running(dev) || !capable(CAP_NET_ADMIN))
|
|
return -EACCES;
|
|
hi->data.modename[sizeof(hi->data.modename)-1] = '\0';
|
|
return baycom_setmode(bc, hi->data.modename);
|
|
|
|
case HDLCDRVCTL_MODELIST:
|
|
strcpy(hi->data.modename, "par96,picpar");
|
|
if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl)))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case HDLCDRVCTL_MODEMPARMASK:
|
|
return HDLCDRV_PARMASK_IOBASE;
|
|
|
|
}
|
|
|
|
if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
|
|
return -EFAULT;
|
|
switch (bi.cmd) {
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
|
|
#ifdef BAYCOM_DEBUG
|
|
case BAYCOMCTL_GETDEBUG:
|
|
bi.data.dbg.debug1 = bc->hdrv.ptt_keyed;
|
|
bi.data.dbg.debug2 = bc->debug_vals.last_intcnt;
|
|
bi.data.dbg.debug3 = bc->debug_vals.last_pllcorr;
|
|
break;
|
|
#endif /* BAYCOM_DEBUG */
|
|
|
|
}
|
|
if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* command line settable parameters
|
|
*/
|
|
static const char *mode[NR_PORTS] = { "picpar", };
|
|
static int iobase[NR_PORTS] = { 0x378, };
|
|
|
|
module_param_array(mode, charp, NULL, 0);
|
|
MODULE_PARM_DESC(mode, "baycom operating mode; eg. par96 or picpar");
|
|
module_param_array(iobase, int, NULL, 0);
|
|
MODULE_PARM_DESC(iobase, "baycom io base address");
|
|
|
|
MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
|
|
MODULE_DESCRIPTION("Baycom par96 and picpar amateur radio modem driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
static int __init init_baycompar(void)
|
|
{
|
|
int i, found = 0;
|
|
char set_hw = 1;
|
|
|
|
printk(bc_drvinfo);
|
|
/*
|
|
* register net devices
|
|
*/
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
struct net_device *dev;
|
|
struct baycom_state *bc;
|
|
char ifname[IFNAMSIZ];
|
|
|
|
sprintf(ifname, "bcp%d", i);
|
|
|
|
if (!mode[i])
|
|
set_hw = 0;
|
|
if (!set_hw)
|
|
iobase[i] = 0;
|
|
|
|
dev = hdlcdrv_register(&par96_ops,
|
|
sizeof(struct baycom_state),
|
|
ifname, iobase[i], 0, 0);
|
|
if (IS_ERR(dev))
|
|
break;
|
|
|
|
bc = netdev_priv(dev);
|
|
if (set_hw && baycom_setmode(bc, mode[i]))
|
|
set_hw = 0;
|
|
found++;
|
|
baycom_device[i] = dev;
|
|
}
|
|
|
|
if (!found)
|
|
return -ENXIO;
|
|
return 0;
|
|
}
|
|
|
|
static void __exit cleanup_baycompar(void)
|
|
{
|
|
int i;
|
|
|
|
for(i = 0; i < NR_PORTS; i++) {
|
|
struct net_device *dev = baycom_device[i];
|
|
|
|
if (dev)
|
|
hdlcdrv_unregister(dev);
|
|
}
|
|
}
|
|
|
|
module_init(init_baycompar);
|
|
module_exit(cleanup_baycompar);
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
#ifndef MODULE
|
|
|
|
/*
|
|
* format: baycom_par=io,mode
|
|
* mode: par96,picpar
|
|
*/
|
|
|
|
static int __init baycom_par_setup(char *str)
|
|
{
|
|
static unsigned nr_dev;
|
|
int ints[2];
|
|
|
|
if (nr_dev >= NR_PORTS)
|
|
return 0;
|
|
str = get_options(str, 2, ints);
|
|
if (ints[0] < 1)
|
|
return 0;
|
|
mode[nr_dev] = str;
|
|
iobase[nr_dev] = ints[1];
|
|
nr_dev++;
|
|
return 1;
|
|
}
|
|
|
|
__setup("baycom_par=", baycom_par_setup);
|
|
|
|
#endif /* MODULE */
|
|
/* --------------------------------------------------------------------- */
|