linux-stable/drivers/md/raid0.c
Jason Baron e836007089 md/raid0: add discard support for the 'original' layout
We've found that using raid0 with the 'original' layout and discard
enabled with different disk sizes (such that at least two zones are
created) can result in data corruption. This is due to the fact that
the discard handling in 'raid0_handle_discard()' assumes the 'alternate'
layout. We've seen this corruption using ext4 but other filesystems are
likely susceptible as well.

More specifically, while multiple zones are necessary to create the
corruption, the corruption may not occur with multiple zones if they
layout in such a way the layout matches what the 'alternate' layout
would have produced. Thus, not all raid0 devices with the 'original'
layout, different size disks and discard enabled will encounter this
corruption.

The 3.14 kernel inadvertently changed the raid0 disk layout for different
size disks. Thus, running a pre-3.14 kernel and post-3.14 kernel on the
same raid0 array could corrupt data. This lead to the creation of the
'original' layout (to match the pre-3.14 layout) and the 'alternate' layout
(to match the post 3.14 layout) in the 5.4 kernel time frame and an option
to tell the kernel which layout to use (since it couldn't be autodetected).
However, when the 'original' layout was added back to 5.4 discard support
for the 'original' layout was not added leading this issue.

I've been able to reliably reproduce the corruption with the following
test case:

1. create raid0 array with different size disks using original layout
2. mkfs
3. mount -o discard
4. create lots of files
5. remove 1/2 the files
6. fstrim -a (or just the mount point for the raid0 array)
7. umount
8. fsck -fn /dev/md0 (spews all sorts of corruptions)

Let's fix this by adding proper discard support to the 'original' layout.
The fix 'maps' the 'original' layout disks to the order in which they are
read/written such that we can compare the disks in the same way that the
current 'alternate' layout does. A 'disk_shift' field is added to
'struct strip_zone'. This could be computed on the fly in
raid0_handle_discard() but by adding this field, we save some computation
in the discard path.

Note we could also potentially fix this by re-ordering the disks in the
zones that follow the first one, and then always read/writing them using
the 'alternate' layout. However, that is seen as a more substantial change,
and we are attempting the least invasive fix at this time to remedy the
corruption.

I've verified the change using the reproducer mentioned above. Typically,
the corruption is seen after less than 3 iterations, while the patch has
run 500+ iterations.

Cc: NeilBrown <neilb@suse.de>
Cc: Song Liu <song@kernel.org>
Fixes: c84a1372df ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230623180523.1901230-1-jbaron@akamai.com
2023-06-30 15:43:50 -07:00

846 lines
22 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
raid0.c : Multiple Devices driver for Linux
Copyright (C) 1994-96 Marc ZYNGIER
<zyngier@ufr-info-p7.ibp.fr> or
<maz@gloups.fdn.fr>
Copyright (C) 1999, 2000 Ingo Molnar, Red Hat
RAID-0 management functions.
*/
#include <linux/blkdev.h>
#include <linux/seq_file.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <trace/events/block.h>
#include "md.h"
#include "raid0.h"
#include "raid5.h"
static int default_layout = 0;
module_param(default_layout, int, 0644);
#define UNSUPPORTED_MDDEV_FLAGS \
((1L << MD_HAS_JOURNAL) | \
(1L << MD_JOURNAL_CLEAN) | \
(1L << MD_FAILFAST_SUPPORTED) |\
(1L << MD_HAS_PPL) | \
(1L << MD_HAS_MULTIPLE_PPLS))
/*
* inform the user of the raid configuration
*/
static void dump_zones(struct mddev *mddev)
{
int j, k;
sector_t zone_size = 0;
sector_t zone_start = 0;
struct r0conf *conf = mddev->private;
int raid_disks = conf->strip_zone[0].nb_dev;
pr_debug("md: RAID0 configuration for %s - %d zone%s\n",
mdname(mddev),
conf->nr_strip_zones, conf->nr_strip_zones==1?"":"s");
for (j = 0; j < conf->nr_strip_zones; j++) {
char line[200];
int len = 0;
for (k = 0; k < conf->strip_zone[j].nb_dev; k++)
len += scnprintf(line+len, 200-len, "%s%pg", k?"/":"",
conf->devlist[j * raid_disks + k]->bdev);
pr_debug("md: zone%d=[%s]\n", j, line);
zone_size = conf->strip_zone[j].zone_end - zone_start;
pr_debug(" zone-offset=%10lluKB, device-offset=%10lluKB, size=%10lluKB\n",
(unsigned long long)zone_start>>1,
(unsigned long long)conf->strip_zone[j].dev_start>>1,
(unsigned long long)zone_size>>1);
zone_start = conf->strip_zone[j].zone_end;
}
}
static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)
{
int i, c, err;
sector_t curr_zone_end, sectors;
struct md_rdev *smallest, *rdev1, *rdev2, *rdev, **dev;
struct strip_zone *zone;
int cnt;
struct r0conf *conf = kzalloc(sizeof(*conf), GFP_KERNEL);
unsigned blksize = 512;
*private_conf = ERR_PTR(-ENOMEM);
if (!conf)
return -ENOMEM;
rdev_for_each(rdev1, mddev) {
pr_debug("md/raid0:%s: looking at %pg\n",
mdname(mddev),
rdev1->bdev);
c = 0;
/* round size to chunk_size */
sectors = rdev1->sectors;
sector_div(sectors, mddev->chunk_sectors);
rdev1->sectors = sectors * mddev->chunk_sectors;
blksize = max(blksize, queue_logical_block_size(
rdev1->bdev->bd_disk->queue));
rdev_for_each(rdev2, mddev) {
pr_debug("md/raid0:%s: comparing %pg(%llu)"
" with %pg(%llu)\n",
mdname(mddev),
rdev1->bdev,
(unsigned long long)rdev1->sectors,
rdev2->bdev,
(unsigned long long)rdev2->sectors);
if (rdev2 == rdev1) {
pr_debug("md/raid0:%s: END\n",
mdname(mddev));
break;
}
if (rdev2->sectors == rdev1->sectors) {
/*
* Not unique, don't count it as a new
* group
*/
pr_debug("md/raid0:%s: EQUAL\n",
mdname(mddev));
c = 1;
break;
}
pr_debug("md/raid0:%s: NOT EQUAL\n",
mdname(mddev));
}
if (!c) {
pr_debug("md/raid0:%s: ==> UNIQUE\n",
mdname(mddev));
conf->nr_strip_zones++;
pr_debug("md/raid0:%s: %d zones\n",
mdname(mddev), conf->nr_strip_zones);
}
}
pr_debug("md/raid0:%s: FINAL %d zones\n",
mdname(mddev), conf->nr_strip_zones);
/*
* now since we have the hard sector sizes, we can make sure
* chunk size is a multiple of that sector size
*/
if ((mddev->chunk_sectors << 9) % blksize) {
pr_warn("md/raid0:%s: chunk_size of %d not multiple of block size %d\n",
mdname(mddev),
mddev->chunk_sectors << 9, blksize);
err = -EINVAL;
goto abort;
}
err = -ENOMEM;
conf->strip_zone = kcalloc(conf->nr_strip_zones,
sizeof(struct strip_zone),
GFP_KERNEL);
if (!conf->strip_zone)
goto abort;
conf->devlist = kzalloc(array3_size(sizeof(struct md_rdev *),
conf->nr_strip_zones,
mddev->raid_disks),
GFP_KERNEL);
if (!conf->devlist)
goto abort;
/* The first zone must contain all devices, so here we check that
* there is a proper alignment of slots to devices and find them all
*/
zone = &conf->strip_zone[0];
cnt = 0;
smallest = NULL;
dev = conf->devlist;
err = -EINVAL;
rdev_for_each(rdev1, mddev) {
int j = rdev1->raid_disk;
if (mddev->level == 10) {
/* taking over a raid10-n2 array */
j /= 2;
rdev1->new_raid_disk = j;
}
if (mddev->level == 1) {
/* taiking over a raid1 array-
* we have only one active disk
*/
j = 0;
rdev1->new_raid_disk = j;
}
if (j < 0) {
pr_warn("md/raid0:%s: remove inactive devices before converting to RAID0\n",
mdname(mddev));
goto abort;
}
if (j >= mddev->raid_disks) {
pr_warn("md/raid0:%s: bad disk number %d - aborting!\n",
mdname(mddev), j);
goto abort;
}
if (dev[j]) {
pr_warn("md/raid0:%s: multiple devices for %d - aborting!\n",
mdname(mddev), j);
goto abort;
}
dev[j] = rdev1;
if (!smallest || (rdev1->sectors < smallest->sectors))
smallest = rdev1;
cnt++;
}
if (cnt != mddev->raid_disks) {
pr_warn("md/raid0:%s: too few disks (%d of %d) - aborting!\n",
mdname(mddev), cnt, mddev->raid_disks);
goto abort;
}
zone->nb_dev = cnt;
zone->zone_end = smallest->sectors * cnt;
curr_zone_end = zone->zone_end;
/* now do the other zones */
for (i = 1; i < conf->nr_strip_zones; i++)
{
int j;
zone = conf->strip_zone + i;
dev = conf->devlist + i * mddev->raid_disks;
pr_debug("md/raid0:%s: zone %d\n", mdname(mddev), i);
zone->dev_start = smallest->sectors;
smallest = NULL;
c = 0;
for (j=0; j<cnt; j++) {
rdev = conf->devlist[j];
if (rdev->sectors <= zone->dev_start) {
pr_debug("md/raid0:%s: checking %pg ... nope\n",
mdname(mddev),
rdev->bdev);
continue;
}
pr_debug("md/raid0:%s: checking %pg ..."
" contained as device %d\n",
mdname(mddev),
rdev->bdev, c);
dev[c] = rdev;
c++;
if (!smallest || rdev->sectors < smallest->sectors) {
smallest = rdev;
pr_debug("md/raid0:%s: (%llu) is smallest!.\n",
mdname(mddev),
(unsigned long long)rdev->sectors);
}
}
zone->nb_dev = c;
sectors = (smallest->sectors - zone->dev_start) * c;
pr_debug("md/raid0:%s: zone->nb_dev: %d, sectors: %llu\n",
mdname(mddev),
zone->nb_dev, (unsigned long long)sectors);
curr_zone_end += sectors;
zone->zone_end = curr_zone_end;
pr_debug("md/raid0:%s: current zone start: %llu\n",
mdname(mddev),
(unsigned long long)smallest->sectors);
}
if (conf->nr_strip_zones == 1 || conf->strip_zone[1].nb_dev == 1) {
conf->layout = RAID0_ORIG_LAYOUT;
} else if (mddev->layout == RAID0_ORIG_LAYOUT ||
mddev->layout == RAID0_ALT_MULTIZONE_LAYOUT) {
conf->layout = mddev->layout;
} else if (default_layout == RAID0_ORIG_LAYOUT ||
default_layout == RAID0_ALT_MULTIZONE_LAYOUT) {
conf->layout = default_layout;
} else {
pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n",
mdname(mddev));
pr_err("md/raid0: please set raid0.default_layout to 1 or 2\n");
err = -EOPNOTSUPP;
goto abort;
}
if (conf->layout == RAID0_ORIG_LAYOUT) {
for (i = 1; i < conf->nr_strip_zones; i++) {
sector_t first_sector = conf->strip_zone[i-1].zone_end;
sector_div(first_sector, mddev->chunk_sectors);
zone = conf->strip_zone + i;
/* disk_shift is first disk index used in the zone */
zone->disk_shift = sector_div(first_sector,
zone->nb_dev);
}
}
pr_debug("md/raid0:%s: done.\n", mdname(mddev));
*private_conf = conf;
return 0;
abort:
kfree(conf->strip_zone);
kfree(conf->devlist);
kfree(conf);
*private_conf = ERR_PTR(err);
return err;
}
/* Find the zone which holds a particular offset
* Update *sectorp to be an offset in that zone
*/
static struct strip_zone *find_zone(struct r0conf *conf,
sector_t *sectorp)
{
int i;
struct strip_zone *z = conf->strip_zone;
sector_t sector = *sectorp;
for (i = 0; i < conf->nr_strip_zones; i++)
if (sector < z[i].zone_end) {
if (i)
*sectorp = sector - z[i-1].zone_end;
return z + i;
}
BUG();
}
/*
* remaps the bio to the target device. we separate two flows.
* power 2 flow and a general flow for the sake of performance
*/
static struct md_rdev *map_sector(struct mddev *mddev, struct strip_zone *zone,
sector_t sector, sector_t *sector_offset)
{
unsigned int sect_in_chunk;
sector_t chunk;
struct r0conf *conf = mddev->private;
int raid_disks = conf->strip_zone[0].nb_dev;
unsigned int chunk_sects = mddev->chunk_sectors;
if (is_power_of_2(chunk_sects)) {
int chunksect_bits = ffz(~chunk_sects);
/* find the sector offset inside the chunk */
sect_in_chunk = sector & (chunk_sects - 1);
sector >>= chunksect_bits;
/* chunk in zone */
chunk = *sector_offset;
/* quotient is the chunk in real device*/
sector_div(chunk, zone->nb_dev << chunksect_bits);
} else{
sect_in_chunk = sector_div(sector, chunk_sects);
chunk = *sector_offset;
sector_div(chunk, chunk_sects * zone->nb_dev);
}
/*
* position the bio over the real device
* real sector = chunk in device + starting of zone
* + the position in the chunk
*/
*sector_offset = (chunk * chunk_sects) + sect_in_chunk;
return conf->devlist[(zone - conf->strip_zone)*raid_disks
+ sector_div(sector, zone->nb_dev)];
}
static sector_t raid0_size(struct mddev *mddev, sector_t sectors, int raid_disks)
{
sector_t array_sectors = 0;
struct md_rdev *rdev;
WARN_ONCE(sectors || raid_disks,
"%s does not support generic reshape\n", __func__);
rdev_for_each(rdev, mddev)
array_sectors += (rdev->sectors &
~(sector_t)(mddev->chunk_sectors-1));
return array_sectors;
}
static void free_conf(struct mddev *mddev, struct r0conf *conf)
{
kfree(conf->strip_zone);
kfree(conf->devlist);
kfree(conf);
}
static void raid0_free(struct mddev *mddev, void *priv)
{
struct r0conf *conf = priv;
free_conf(mddev, conf);
acct_bioset_exit(mddev);
}
static int raid0_run(struct mddev *mddev)
{
struct r0conf *conf;
int ret;
if (mddev->chunk_sectors == 0) {
pr_warn("md/raid0:%s: chunk size must be set.\n", mdname(mddev));
return -EINVAL;
}
if (md_check_no_bitmap(mddev))
return -EINVAL;
if (acct_bioset_init(mddev)) {
pr_err("md/raid0:%s: alloc acct bioset failed.\n", mdname(mddev));
return -ENOMEM;
}
/* if private is not null, we are here after takeover */
if (mddev->private == NULL) {
ret = create_strip_zones(mddev, &conf);
if (ret < 0)
goto exit_acct_set;
mddev->private = conf;
}
conf = mddev->private;
if (mddev->queue) {
struct md_rdev *rdev;
blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors);
blk_queue_max_write_zeroes_sectors(mddev->queue, mddev->chunk_sectors);
blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9);
blk_queue_io_opt(mddev->queue,
(mddev->chunk_sectors << 9) * mddev->raid_disks);
rdev_for_each(rdev, mddev) {
disk_stack_limits(mddev->gendisk, rdev->bdev,
rdev->data_offset << 9);
}
}
/* calculate array device size */
md_set_array_sectors(mddev, raid0_size(mddev, 0, 0));
pr_debug("md/raid0:%s: md_size is %llu sectors.\n",
mdname(mddev),
(unsigned long long)mddev->array_sectors);
dump_zones(mddev);
ret = md_integrity_register(mddev);
if (ret)
goto free;
return ret;
free:
free_conf(mddev, conf);
exit_acct_set:
acct_bioset_exit(mddev);
return ret;
}
/*
* Convert disk_index to the disk order in which it is read/written.
* For example, if we have 4 disks, they are numbered 0,1,2,3. If we
* write the disks starting at disk 3, then the read/write order would
* be disk 3, then 0, then 1, and then disk 2 and we want map_disk_shift()
* to map the disks as follows 0,1,2,3 => 1,2,3,0. So disk 0 would map
* to 1, 1 to 2, 2 to 3, and 3 to 0. That way we can compare disks in
* that 'output' space to understand the read/write disk ordering.
*/
static int map_disk_shift(int disk_index, int num_disks, int disk_shift)
{
return ((disk_index + num_disks - disk_shift) % num_disks);
}
static void raid0_handle_discard(struct mddev *mddev, struct bio *bio)
{
struct r0conf *conf = mddev->private;
struct strip_zone *zone;
sector_t start = bio->bi_iter.bi_sector;
sector_t end;
unsigned int stripe_size;
sector_t first_stripe_index, last_stripe_index;
sector_t start_disk_offset;
unsigned int start_disk_index;
sector_t end_disk_offset;
unsigned int end_disk_index;
unsigned int disk;
sector_t orig_start, orig_end;
orig_start = start;
zone = find_zone(conf, &start);
if (bio_end_sector(bio) > zone->zone_end) {
struct bio *split = bio_split(bio,
zone->zone_end - bio->bi_iter.bi_sector, GFP_NOIO,
&mddev->bio_set);
bio_chain(split, bio);
submit_bio_noacct(bio);
bio = split;
end = zone->zone_end;
} else
end = bio_end_sector(bio);
orig_end = end;
if (zone != conf->strip_zone)
end = end - zone[-1].zone_end;
/* Now start and end is the offset in zone */
stripe_size = zone->nb_dev * mddev->chunk_sectors;
first_stripe_index = start;
sector_div(first_stripe_index, stripe_size);
last_stripe_index = end;
sector_div(last_stripe_index, stripe_size);
/* In the first zone the original and alternate layouts are the same */
if ((conf->layout == RAID0_ORIG_LAYOUT) && (zone != conf->strip_zone)) {
sector_div(orig_start, mddev->chunk_sectors);
start_disk_index = sector_div(orig_start, zone->nb_dev);
start_disk_index = map_disk_shift(start_disk_index,
zone->nb_dev,
zone->disk_shift);
sector_div(orig_end, mddev->chunk_sectors);
end_disk_index = sector_div(orig_end, zone->nb_dev);
end_disk_index = map_disk_shift(end_disk_index,
zone->nb_dev, zone->disk_shift);
} else {
start_disk_index = (int)(start - first_stripe_index * stripe_size) /
mddev->chunk_sectors;
end_disk_index = (int)(end - last_stripe_index * stripe_size) /
mddev->chunk_sectors;
}
start_disk_offset = ((int)(start - first_stripe_index * stripe_size) %
mddev->chunk_sectors) +
first_stripe_index * mddev->chunk_sectors;
end_disk_offset = ((int)(end - last_stripe_index * stripe_size) %
mddev->chunk_sectors) +
last_stripe_index * mddev->chunk_sectors;
for (disk = 0; disk < zone->nb_dev; disk++) {
sector_t dev_start, dev_end;
struct md_rdev *rdev;
int compare_disk;
compare_disk = map_disk_shift(disk, zone->nb_dev,
zone->disk_shift);
if (compare_disk < start_disk_index)
dev_start = (first_stripe_index + 1) *
mddev->chunk_sectors;
else if (compare_disk > start_disk_index)
dev_start = first_stripe_index * mddev->chunk_sectors;
else
dev_start = start_disk_offset;
if (compare_disk < end_disk_index)
dev_end = (last_stripe_index + 1) * mddev->chunk_sectors;
else if (compare_disk > end_disk_index)
dev_end = last_stripe_index * mddev->chunk_sectors;
else
dev_end = end_disk_offset;
if (dev_end <= dev_start)
continue;
rdev = conf->devlist[(zone - conf->strip_zone) *
conf->strip_zone[0].nb_dev + disk];
md_submit_discard_bio(mddev, rdev, bio,
dev_start + zone->dev_start + rdev->data_offset,
dev_end - dev_start);
}
bio_endio(bio);
}
static bool raid0_make_request(struct mddev *mddev, struct bio *bio)
{
struct r0conf *conf = mddev->private;
struct strip_zone *zone;
struct md_rdev *tmp_dev;
sector_t bio_sector;
sector_t sector;
sector_t orig_sector;
unsigned chunk_sects;
unsigned sectors;
if (unlikely(bio->bi_opf & REQ_PREFLUSH)
&& md_flush_request(mddev, bio))
return true;
if (unlikely((bio_op(bio) == REQ_OP_DISCARD))) {
raid0_handle_discard(mddev, bio);
return true;
}
bio_sector = bio->bi_iter.bi_sector;
sector = bio_sector;
chunk_sects = mddev->chunk_sectors;
sectors = chunk_sects -
(likely(is_power_of_2(chunk_sects))
? (sector & (chunk_sects-1))
: sector_div(sector, chunk_sects));
/* Restore due to sector_div */
sector = bio_sector;
if (sectors < bio_sectors(bio)) {
struct bio *split = bio_split(bio, sectors, GFP_NOIO,
&mddev->bio_set);
bio_chain(split, bio);
submit_bio_noacct(bio);
bio = split;
}
if (bio->bi_pool != &mddev->bio_set)
md_account_bio(mddev, &bio);
orig_sector = sector;
zone = find_zone(mddev->private, &sector);
switch (conf->layout) {
case RAID0_ORIG_LAYOUT:
tmp_dev = map_sector(mddev, zone, orig_sector, &sector);
break;
case RAID0_ALT_MULTIZONE_LAYOUT:
tmp_dev = map_sector(mddev, zone, sector, &sector);
break;
default:
WARN(1, "md/raid0:%s: Invalid layout\n", mdname(mddev));
bio_io_error(bio);
return true;
}
if (unlikely(is_rdev_broken(tmp_dev))) {
bio_io_error(bio);
md_error(mddev, tmp_dev);
return true;
}
bio_set_dev(bio, tmp_dev->bdev);
bio->bi_iter.bi_sector = sector + zone->dev_start +
tmp_dev->data_offset;
if (mddev->gendisk)
trace_block_bio_remap(bio, disk_devt(mddev->gendisk),
bio_sector);
mddev_check_write_zeroes(mddev, bio);
submit_bio_noacct(bio);
return true;
}
static void raid0_status(struct seq_file *seq, struct mddev *mddev)
{
seq_printf(seq, " %dk chunks", mddev->chunk_sectors / 2);
return;
}
static void raid0_error(struct mddev *mddev, struct md_rdev *rdev)
{
if (!test_and_set_bit(MD_BROKEN, &mddev->flags)) {
char *md_name = mdname(mddev);
pr_crit("md/raid0%s: Disk failure on %pg detected, failing array.\n",
md_name, rdev->bdev);
}
}
static void *raid0_takeover_raid45(struct mddev *mddev)
{
struct md_rdev *rdev;
struct r0conf *priv_conf;
if (mddev->degraded != 1) {
pr_warn("md/raid0:%s: raid5 must be degraded! Degraded disks: %d\n",
mdname(mddev),
mddev->degraded);
return ERR_PTR(-EINVAL);
}
rdev_for_each(rdev, mddev) {
/* check slot number for a disk */
if (rdev->raid_disk == mddev->raid_disks-1) {
pr_warn("md/raid0:%s: raid5 must have missing parity disk!\n",
mdname(mddev));
return ERR_PTR(-EINVAL);
}
rdev->sectors = mddev->dev_sectors;
}
/* Set new parameters */
mddev->new_level = 0;
mddev->new_layout = 0;
mddev->new_chunk_sectors = mddev->chunk_sectors;
mddev->raid_disks--;
mddev->delta_disks = -1;
/* make sure it will be not marked as dirty */
mddev->recovery_cp = MaxSector;
mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS);
create_strip_zones(mddev, &priv_conf);
return priv_conf;
}
static void *raid0_takeover_raid10(struct mddev *mddev)
{
struct r0conf *priv_conf;
/* Check layout:
* - far_copies must be 1
* - near_copies must be 2
* - disks number must be even
* - all mirrors must be already degraded
*/
if (mddev->layout != ((1 << 8) + 2)) {
pr_warn("md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",
mdname(mddev),
mddev->layout);
return ERR_PTR(-EINVAL);
}
if (mddev->raid_disks & 1) {
pr_warn("md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",
mdname(mddev));
return ERR_PTR(-EINVAL);
}
if (mddev->degraded != (mddev->raid_disks>>1)) {
pr_warn("md/raid0:%s: All mirrors must be already degraded!\n",
mdname(mddev));
return ERR_PTR(-EINVAL);
}
/* Set new parameters */
mddev->new_level = 0;
mddev->new_layout = 0;
mddev->new_chunk_sectors = mddev->chunk_sectors;
mddev->delta_disks = - mddev->raid_disks / 2;
mddev->raid_disks += mddev->delta_disks;
mddev->degraded = 0;
/* make sure it will be not marked as dirty */
mddev->recovery_cp = MaxSector;
mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS);
create_strip_zones(mddev, &priv_conf);
return priv_conf;
}
static void *raid0_takeover_raid1(struct mddev *mddev)
{
struct r0conf *priv_conf;
int chunksect;
/* Check layout:
* - (N - 1) mirror drives must be already faulty
*/
if ((mddev->raid_disks - 1) != mddev->degraded) {
pr_err("md/raid0:%s: (N - 1) mirrors drives must be already faulty!\n",
mdname(mddev));
return ERR_PTR(-EINVAL);
}
/*
* a raid1 doesn't have the notion of chunk size, so
* figure out the largest suitable size we can use.
*/
chunksect = 64 * 2; /* 64K by default */
/* The array must be an exact multiple of chunksize */
while (chunksect && (mddev->array_sectors & (chunksect - 1)))
chunksect >>= 1;
if ((chunksect << 9) < PAGE_SIZE)
/* array size does not allow a suitable chunk size */
return ERR_PTR(-EINVAL);
/* Set new parameters */
mddev->new_level = 0;
mddev->new_layout = 0;
mddev->new_chunk_sectors = chunksect;
mddev->chunk_sectors = chunksect;
mddev->delta_disks = 1 - mddev->raid_disks;
mddev->raid_disks = 1;
/* make sure it will be not marked as dirty */
mddev->recovery_cp = MaxSector;
mddev_clear_unsupported_flags(mddev, UNSUPPORTED_MDDEV_FLAGS);
create_strip_zones(mddev, &priv_conf);
return priv_conf;
}
static void *raid0_takeover(struct mddev *mddev)
{
/* raid0 can take over:
* raid4 - if all data disks are active.
* raid5 - providing it is Raid4 layout and one disk is faulty
* raid10 - assuming we have all necessary active disks
* raid1 - with (N -1) mirror drives faulty
*/
if (mddev->bitmap) {
pr_warn("md/raid0: %s: cannot takeover array with bitmap\n",
mdname(mddev));
return ERR_PTR(-EBUSY);
}
if (mddev->level == 4)
return raid0_takeover_raid45(mddev);
if (mddev->level == 5) {
if (mddev->layout == ALGORITHM_PARITY_N)
return raid0_takeover_raid45(mddev);
pr_warn("md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n",
mdname(mddev), ALGORITHM_PARITY_N);
}
if (mddev->level == 10)
return raid0_takeover_raid10(mddev);
if (mddev->level == 1)
return raid0_takeover_raid1(mddev);
pr_warn("Takeover from raid%i to raid0 not supported\n",
mddev->level);
return ERR_PTR(-EINVAL);
}
static void raid0_quiesce(struct mddev *mddev, int quiesce)
{
}
static struct md_personality raid0_personality=
{
.name = "raid0",
.level = 0,
.owner = THIS_MODULE,
.make_request = raid0_make_request,
.run = raid0_run,
.free = raid0_free,
.status = raid0_status,
.size = raid0_size,
.takeover = raid0_takeover,
.quiesce = raid0_quiesce,
.error_handler = raid0_error,
};
static int __init raid0_init (void)
{
return register_md_personality (&raid0_personality);
}
static void raid0_exit (void)
{
unregister_md_personality (&raid0_personality);
}
module_init(raid0_init);
module_exit(raid0_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("RAID0 (striping) personality for MD");
MODULE_ALIAS("md-personality-2"); /* RAID0 */
MODULE_ALIAS("md-raid0");
MODULE_ALIAS("md-level-0");