mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Hans de Goede](/assets/img/avatar_default.png)
This patch fixes a number of cases where things were not properly cleaned up when acpi_check_resource_conflict() returned an error, causing oopses such as the one reported here: https://bugzilla.redhat.com/show_bug.cgi?id=483208 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
1381 lines
39 KiB
C
1381 lines
39 KiB
C
/*
|
|
* vt1211.c - driver for the VIA VT1211 Super-I/O chip integrated hardware
|
|
* monitoring features
|
|
* Copyright (C) 2006 Juerg Haefliger <juergh@gmail.com>
|
|
*
|
|
* This driver is based on the driver for kernel 2.4 by Mark D. Studebaker
|
|
* and its port to kernel 2.6 by Lars Ekman.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/hwmon-vid.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/acpi.h>
|
|
#include <asm/io.h>
|
|
|
|
static int uch_config = -1;
|
|
module_param(uch_config, int, 0);
|
|
MODULE_PARM_DESC(uch_config, "Initialize the universal channel configuration");
|
|
|
|
static int int_mode = -1;
|
|
module_param(int_mode, int, 0);
|
|
MODULE_PARM_DESC(int_mode, "Force the temperature interrupt mode");
|
|
|
|
static unsigned short force_id;
|
|
module_param(force_id, ushort, 0);
|
|
MODULE_PARM_DESC(force_id, "Override the detected device ID");
|
|
|
|
static struct platform_device *pdev;
|
|
|
|
#define DRVNAME "vt1211"
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Registers
|
|
*
|
|
* The sensors are defined as follows.
|
|
*
|
|
* Sensor Voltage Mode Temp Mode Notes (from the datasheet)
|
|
* -------- ------------ --------- --------------------------
|
|
* Reading 1 temp1 Intel thermal diode
|
|
* Reading 3 temp2 Internal thermal diode
|
|
* UCH1/Reading2 in0 temp3 NTC type thermistor
|
|
* UCH2 in1 temp4 +2.5V
|
|
* UCH3 in2 temp5 VccP
|
|
* UCH4 in3 temp6 +5V
|
|
* UCH5 in4 temp7 +12V
|
|
* 3.3V in5 Internal VDD (+3.3V)
|
|
*
|
|
* --------------------------------------------------------------------- */
|
|
|
|
/* Voltages (in) numbered 0-5 (ix) */
|
|
#define VT1211_REG_IN(ix) (0x21 + (ix))
|
|
#define VT1211_REG_IN_MIN(ix) ((ix) == 0 ? 0x3e : 0x2a + 2 * (ix))
|
|
#define VT1211_REG_IN_MAX(ix) ((ix) == 0 ? 0x3d : 0x29 + 2 * (ix))
|
|
|
|
/* Temperatures (temp) numbered 0-6 (ix) */
|
|
static u8 regtemp[] = {0x1f, 0x20, 0x21, 0x22, 0x23, 0x24, 0x25};
|
|
static u8 regtempmax[] = {0x39, 0x1d, 0x3d, 0x2b, 0x2d, 0x2f, 0x31};
|
|
static u8 regtemphyst[] = {0x3a, 0x1e, 0x3e, 0x2c, 0x2e, 0x30, 0x32};
|
|
|
|
/* Fans numbered 0-1 (ix) */
|
|
#define VT1211_REG_FAN(ix) (0x29 + (ix))
|
|
#define VT1211_REG_FAN_MIN(ix) (0x3b + (ix))
|
|
#define VT1211_REG_FAN_DIV 0x47
|
|
|
|
/* PWMs numbered 0-1 (ix) */
|
|
/* Auto points numbered 0-3 (ap) */
|
|
#define VT1211_REG_PWM(ix) (0x60 + (ix))
|
|
#define VT1211_REG_PWM_CLK 0x50
|
|
#define VT1211_REG_PWM_CTL 0x51
|
|
#define VT1211_REG_PWM_AUTO_TEMP(ap) (0x55 - (ap))
|
|
#define VT1211_REG_PWM_AUTO_PWM(ix, ap) (0x58 + 2 * (ix) - (ap))
|
|
|
|
/* Miscellaneous registers */
|
|
#define VT1211_REG_CONFIG 0x40
|
|
#define VT1211_REG_ALARM1 0x41
|
|
#define VT1211_REG_ALARM2 0x42
|
|
#define VT1211_REG_VID 0x45
|
|
#define VT1211_REG_UCH_CONFIG 0x4a
|
|
#define VT1211_REG_TEMP1_CONFIG 0x4b
|
|
#define VT1211_REG_TEMP2_CONFIG 0x4c
|
|
|
|
/* In, temp & fan alarm bits */
|
|
static const u8 bitalarmin[] = {11, 0, 1, 3, 8, 2, 9};
|
|
static const u8 bitalarmtemp[] = {4, 15, 11, 0, 1, 3, 8};
|
|
static const u8 bitalarmfan[] = {6, 7};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Data structures and manipulation thereof
|
|
* --------------------------------------------------------------------- */
|
|
|
|
struct vt1211_data {
|
|
unsigned short addr;
|
|
const char *name;
|
|
struct device *hwmon_dev;
|
|
|
|
struct mutex update_lock;
|
|
char valid; /* !=0 if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
/* Register values */
|
|
u8 in[6];
|
|
u8 in_max[6];
|
|
u8 in_min[6];
|
|
u8 temp[7];
|
|
u8 temp_max[7];
|
|
u8 temp_hyst[7];
|
|
u8 fan[2];
|
|
u8 fan_min[2];
|
|
u8 fan_div[2];
|
|
u8 fan_ctl;
|
|
u8 pwm[2];
|
|
u8 pwm_ctl[2];
|
|
u8 pwm_clk;
|
|
u8 pwm_auto_temp[4];
|
|
u8 pwm_auto_pwm[2][4];
|
|
u8 vid; /* Read once at init time */
|
|
u8 vrm;
|
|
u8 uch_config; /* Read once at init time */
|
|
u16 alarms;
|
|
};
|
|
|
|
/* ix = [0-5] */
|
|
#define ISVOLT(ix, uch_config) ((ix) > 4 ? 1 : \
|
|
!(((uch_config) >> ((ix) + 2)) & 1))
|
|
|
|
/* ix = [0-6] */
|
|
#define ISTEMP(ix, uch_config) ((ix) < 2 ? 1 : \
|
|
((uch_config) >> (ix)) & 1)
|
|
|
|
/* in5 (ix = 5) is special. It's the internal 3.3V so it's scaled in the
|
|
driver according to the VT1211 BIOS porting guide */
|
|
#define IN_FROM_REG(ix, reg) ((reg) < 3 ? 0 : (ix) == 5 ? \
|
|
(((reg) - 3) * 15882 + 479) / 958 : \
|
|
(((reg) - 3) * 10000 + 479) / 958)
|
|
#define IN_TO_REG(ix, val) (SENSORS_LIMIT((ix) == 5 ? \
|
|
((val) * 958 + 7941) / 15882 + 3 : \
|
|
((val) * 958 + 5000) / 10000 + 3, 0, 255))
|
|
|
|
/* temp1 (ix = 0) is an intel thermal diode which is scaled in user space.
|
|
temp2 (ix = 1) is the internal temp diode so it's scaled in the driver
|
|
according to some measurements that I took on an EPIA M10000.
|
|
temp3-7 are thermistor based so the driver returns the voltage measured at
|
|
the pin (range 0V - 2.2V). */
|
|
#define TEMP_FROM_REG(ix, reg) ((ix) == 0 ? (reg) * 1000 : \
|
|
(ix) == 1 ? (reg) < 51 ? 0 : \
|
|
((reg) - 51) * 1000 : \
|
|
((253 - (reg)) * 2200 + 105) / 210)
|
|
#define TEMP_TO_REG(ix, val) SENSORS_LIMIT( \
|
|
((ix) == 0 ? ((val) + 500) / 1000 : \
|
|
(ix) == 1 ? ((val) + 500) / 1000 + 51 : \
|
|
253 - ((val) * 210 + 1100) / 2200), 0, 255)
|
|
|
|
#define DIV_FROM_REG(reg) (1 << (reg))
|
|
|
|
#define RPM_FROM_REG(reg, div) (((reg) == 0) || ((reg) == 255) ? 0 : \
|
|
1310720 / (reg) / DIV_FROM_REG(div))
|
|
#define RPM_TO_REG(val, div) ((val) == 0 ? 255 : \
|
|
SENSORS_LIMIT((1310720 / (val) / \
|
|
DIV_FROM_REG(div)), 1, 254))
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Super-I/O constants and functions
|
|
* --------------------------------------------------------------------- */
|
|
|
|
/* Configuration index port registers
|
|
* The vt1211 can live at 2 different addresses so we need to probe both */
|
|
#define SIO_REG_CIP1 0x2e
|
|
#define SIO_REG_CIP2 0x4e
|
|
|
|
/* Configuration registers */
|
|
#define SIO_VT1211_LDN 0x07 /* logical device number */
|
|
#define SIO_VT1211_DEVID 0x20 /* device ID */
|
|
#define SIO_VT1211_DEVREV 0x21 /* device revision */
|
|
#define SIO_VT1211_ACTIVE 0x30 /* HW monitor active */
|
|
#define SIO_VT1211_BADDR 0x60 /* base I/O address */
|
|
#define SIO_VT1211_ID 0x3c /* VT1211 device ID */
|
|
|
|
/* VT1211 logical device numbers */
|
|
#define SIO_VT1211_LDN_HWMON 0x0b /* HW monitor */
|
|
|
|
static inline void superio_outb(int sio_cip, int reg, int val)
|
|
{
|
|
outb(reg, sio_cip);
|
|
outb(val, sio_cip + 1);
|
|
}
|
|
|
|
static inline int superio_inb(int sio_cip, int reg)
|
|
{
|
|
outb(reg, sio_cip);
|
|
return inb(sio_cip + 1);
|
|
}
|
|
|
|
static inline void superio_select(int sio_cip, int ldn)
|
|
{
|
|
outb(SIO_VT1211_LDN, sio_cip);
|
|
outb(ldn, sio_cip + 1);
|
|
}
|
|
|
|
static inline void superio_enter(int sio_cip)
|
|
{
|
|
outb(0x87, sio_cip);
|
|
outb(0x87, sio_cip);
|
|
}
|
|
|
|
static inline void superio_exit(int sio_cip)
|
|
{
|
|
outb(0xaa, sio_cip);
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Device I/O access
|
|
* --------------------------------------------------------------------- */
|
|
|
|
static inline u8 vt1211_read8(struct vt1211_data *data, u8 reg)
|
|
{
|
|
return inb(data->addr + reg);
|
|
}
|
|
|
|
static inline void vt1211_write8(struct vt1211_data *data, u8 reg, u8 val)
|
|
{
|
|
outb(val, data->addr + reg);
|
|
}
|
|
|
|
static struct vt1211_data *vt1211_update_device(struct device *dev)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
int ix, val;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
/* registers cache is refreshed after 1 second */
|
|
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
|
|
/* read VID */
|
|
data->vid = vt1211_read8(data, VT1211_REG_VID) & 0x1f;
|
|
|
|
/* voltage (in) registers */
|
|
for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
|
|
if (ISVOLT(ix, data->uch_config)) {
|
|
data->in[ix] = vt1211_read8(data,
|
|
VT1211_REG_IN(ix));
|
|
data->in_min[ix] = vt1211_read8(data,
|
|
VT1211_REG_IN_MIN(ix));
|
|
data->in_max[ix] = vt1211_read8(data,
|
|
VT1211_REG_IN_MAX(ix));
|
|
}
|
|
}
|
|
|
|
/* temp registers */
|
|
for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
|
|
if (ISTEMP(ix, data->uch_config)) {
|
|
data->temp[ix] = vt1211_read8(data,
|
|
regtemp[ix]);
|
|
data->temp_max[ix] = vt1211_read8(data,
|
|
regtempmax[ix]);
|
|
data->temp_hyst[ix] = vt1211_read8(data,
|
|
regtemphyst[ix]);
|
|
}
|
|
}
|
|
|
|
/* fan & pwm registers */
|
|
for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) {
|
|
data->fan[ix] = vt1211_read8(data,
|
|
VT1211_REG_FAN(ix));
|
|
data->fan_min[ix] = vt1211_read8(data,
|
|
VT1211_REG_FAN_MIN(ix));
|
|
data->pwm[ix] = vt1211_read8(data,
|
|
VT1211_REG_PWM(ix));
|
|
}
|
|
val = vt1211_read8(data, VT1211_REG_FAN_DIV);
|
|
data->fan_div[0] = (val >> 4) & 3;
|
|
data->fan_div[1] = (val >> 6) & 3;
|
|
data->fan_ctl = val & 0xf;
|
|
|
|
val = vt1211_read8(data, VT1211_REG_PWM_CTL);
|
|
data->pwm_ctl[0] = val & 0xf;
|
|
data->pwm_ctl[1] = (val >> 4) & 0xf;
|
|
|
|
data->pwm_clk = vt1211_read8(data, VT1211_REG_PWM_CLK);
|
|
|
|
/* pwm & temp auto point registers */
|
|
data->pwm_auto_pwm[0][1] = vt1211_read8(data,
|
|
VT1211_REG_PWM_AUTO_PWM(0, 1));
|
|
data->pwm_auto_pwm[0][2] = vt1211_read8(data,
|
|
VT1211_REG_PWM_AUTO_PWM(0, 2));
|
|
data->pwm_auto_pwm[1][1] = vt1211_read8(data,
|
|
VT1211_REG_PWM_AUTO_PWM(1, 1));
|
|
data->pwm_auto_pwm[1][2] = vt1211_read8(data,
|
|
VT1211_REG_PWM_AUTO_PWM(1, 2));
|
|
for (ix = 0; ix < ARRAY_SIZE(data->pwm_auto_temp); ix++) {
|
|
data->pwm_auto_temp[ix] = vt1211_read8(data,
|
|
VT1211_REG_PWM_AUTO_TEMP(ix));
|
|
}
|
|
|
|
/* alarm registers */
|
|
data->alarms = (vt1211_read8(data, VT1211_REG_ALARM2) << 8) |
|
|
vt1211_read8(data, VT1211_REG_ALARM1);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Voltage sysfs interfaces
|
|
* ix = [0-5]
|
|
* --------------------------------------------------------------------- */
|
|
|
|
#define SHOW_IN_INPUT 0
|
|
#define SHOW_SET_IN_MIN 1
|
|
#define SHOW_SET_IN_MAX 2
|
|
#define SHOW_IN_ALARM 3
|
|
|
|
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt1211_data *data = vt1211_update_device(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
int res;
|
|
|
|
switch (fn) {
|
|
case SHOW_IN_INPUT:
|
|
res = IN_FROM_REG(ix, data->in[ix]);
|
|
break;
|
|
case SHOW_SET_IN_MIN:
|
|
res = IN_FROM_REG(ix, data->in_min[ix]);
|
|
break;
|
|
case SHOW_SET_IN_MAX:
|
|
res = IN_FROM_REG(ix, data->in_max[ix]);
|
|
break;
|
|
case SHOW_IN_ALARM:
|
|
res = (data->alarms >> bitalarmin[ix]) & 1;
|
|
break;
|
|
default:
|
|
res = 0;
|
|
dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", res);
|
|
}
|
|
|
|
static ssize_t set_in(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (fn) {
|
|
case SHOW_SET_IN_MIN:
|
|
data->in_min[ix] = IN_TO_REG(ix, val);
|
|
vt1211_write8(data, VT1211_REG_IN_MIN(ix), data->in_min[ix]);
|
|
break;
|
|
case SHOW_SET_IN_MAX:
|
|
data->in_max[ix] = IN_TO_REG(ix, val);
|
|
vt1211_write8(data, VT1211_REG_IN_MAX(ix), data->in_max[ix]);
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
|
|
}
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Temperature sysfs interfaces
|
|
* ix = [0-6]
|
|
* --------------------------------------------------------------------- */
|
|
|
|
#define SHOW_TEMP_INPUT 0
|
|
#define SHOW_SET_TEMP_MAX 1
|
|
#define SHOW_SET_TEMP_MAX_HYST 2
|
|
#define SHOW_TEMP_ALARM 3
|
|
|
|
static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt1211_data *data = vt1211_update_device(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
int res;
|
|
|
|
switch (fn) {
|
|
case SHOW_TEMP_INPUT:
|
|
res = TEMP_FROM_REG(ix, data->temp[ix]);
|
|
break;
|
|
case SHOW_SET_TEMP_MAX:
|
|
res = TEMP_FROM_REG(ix, data->temp_max[ix]);
|
|
break;
|
|
case SHOW_SET_TEMP_MAX_HYST:
|
|
res = TEMP_FROM_REG(ix, data->temp_hyst[ix]);
|
|
break;
|
|
case SHOW_TEMP_ALARM:
|
|
res = (data->alarms >> bitalarmtemp[ix]) & 1;
|
|
break;
|
|
default:
|
|
res = 0;
|
|
dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", res);
|
|
}
|
|
|
|
static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (fn) {
|
|
case SHOW_SET_TEMP_MAX:
|
|
data->temp_max[ix] = TEMP_TO_REG(ix, val);
|
|
vt1211_write8(data, regtempmax[ix],
|
|
data->temp_max[ix]);
|
|
break;
|
|
case SHOW_SET_TEMP_MAX_HYST:
|
|
data->temp_hyst[ix] = TEMP_TO_REG(ix, val);
|
|
vt1211_write8(data, regtemphyst[ix],
|
|
data->temp_hyst[ix]);
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
|
|
}
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Fan sysfs interfaces
|
|
* ix = [0-1]
|
|
* --------------------------------------------------------------------- */
|
|
|
|
#define SHOW_FAN_INPUT 0
|
|
#define SHOW_SET_FAN_MIN 1
|
|
#define SHOW_SET_FAN_DIV 2
|
|
#define SHOW_FAN_ALARM 3
|
|
|
|
static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt1211_data *data = vt1211_update_device(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
int res;
|
|
|
|
switch (fn) {
|
|
case SHOW_FAN_INPUT:
|
|
res = RPM_FROM_REG(data->fan[ix], data->fan_div[ix]);
|
|
break;
|
|
case SHOW_SET_FAN_MIN:
|
|
res = RPM_FROM_REG(data->fan_min[ix], data->fan_div[ix]);
|
|
break;
|
|
case SHOW_SET_FAN_DIV:
|
|
res = DIV_FROM_REG(data->fan_div[ix]);
|
|
break;
|
|
case SHOW_FAN_ALARM:
|
|
res = (data->alarms >> bitalarmfan[ix]) & 1;
|
|
break;
|
|
default:
|
|
res = 0;
|
|
dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", res);
|
|
}
|
|
|
|
static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
int reg;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
/* sync the data cache */
|
|
reg = vt1211_read8(data, VT1211_REG_FAN_DIV);
|
|
data->fan_div[0] = (reg >> 4) & 3;
|
|
data->fan_div[1] = (reg >> 6) & 3;
|
|
data->fan_ctl = reg & 0xf;
|
|
|
|
switch (fn) {
|
|
case SHOW_SET_FAN_MIN:
|
|
data->fan_min[ix] = RPM_TO_REG(val, data->fan_div[ix]);
|
|
vt1211_write8(data, VT1211_REG_FAN_MIN(ix),
|
|
data->fan_min[ix]);
|
|
break;
|
|
case SHOW_SET_FAN_DIV:
|
|
switch (val) {
|
|
case 1: data->fan_div[ix] = 0; break;
|
|
case 2: data->fan_div[ix] = 1; break;
|
|
case 4: data->fan_div[ix] = 2; break;
|
|
case 8: data->fan_div[ix] = 3; break;
|
|
default:
|
|
count = -EINVAL;
|
|
dev_warn(dev, "fan div value %ld not "
|
|
"supported. Choose one of 1, 2, "
|
|
"4, or 8.\n", val);
|
|
goto EXIT;
|
|
}
|
|
vt1211_write8(data, VT1211_REG_FAN_DIV,
|
|
((data->fan_div[1] << 6) |
|
|
(data->fan_div[0] << 4) |
|
|
data->fan_ctl));
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
|
|
}
|
|
|
|
EXIT:
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* PWM sysfs interfaces
|
|
* ix = [0-1]
|
|
* --------------------------------------------------------------------- */
|
|
|
|
#define SHOW_PWM 0
|
|
#define SHOW_SET_PWM_ENABLE 1
|
|
#define SHOW_SET_PWM_FREQ 2
|
|
#define SHOW_SET_PWM_AUTO_CHANNELS_TEMP 3
|
|
|
|
static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt1211_data *data = vt1211_update_device(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
int res;
|
|
|
|
switch (fn) {
|
|
case SHOW_PWM:
|
|
res = data->pwm[ix];
|
|
break;
|
|
case SHOW_SET_PWM_ENABLE:
|
|
res = ((data->pwm_ctl[ix] >> 3) & 1) ? 2 : 0;
|
|
break;
|
|
case SHOW_SET_PWM_FREQ:
|
|
res = 90000 >> (data->pwm_clk & 7);
|
|
break;
|
|
case SHOW_SET_PWM_AUTO_CHANNELS_TEMP:
|
|
res = (data->pwm_ctl[ix] & 7) + 1;
|
|
break;
|
|
default:
|
|
res = 0;
|
|
dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", res);
|
|
}
|
|
|
|
static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int fn = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
int tmp, reg;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
switch (fn) {
|
|
case SHOW_SET_PWM_ENABLE:
|
|
/* sync the data cache */
|
|
reg = vt1211_read8(data, VT1211_REG_FAN_DIV);
|
|
data->fan_div[0] = (reg >> 4) & 3;
|
|
data->fan_div[1] = (reg >> 6) & 3;
|
|
data->fan_ctl = reg & 0xf;
|
|
reg = vt1211_read8(data, VT1211_REG_PWM_CTL);
|
|
data->pwm_ctl[0] = reg & 0xf;
|
|
data->pwm_ctl[1] = (reg >> 4) & 0xf;
|
|
switch (val) {
|
|
case 0:
|
|
data->pwm_ctl[ix] &= 7;
|
|
/* disable SmartGuardian if both PWM outputs are
|
|
* disabled */
|
|
if ((data->pwm_ctl[ix ^ 1] & 1) == 0) {
|
|
data->fan_ctl &= 0xe;
|
|
}
|
|
break;
|
|
case 2:
|
|
data->pwm_ctl[ix] |= 8;
|
|
data->fan_ctl |= 1;
|
|
break;
|
|
default:
|
|
count = -EINVAL;
|
|
dev_warn(dev, "pwm mode %ld not supported. "
|
|
"Choose one of 0 or 2.\n", val);
|
|
goto EXIT;
|
|
}
|
|
vt1211_write8(data, VT1211_REG_PWM_CTL,
|
|
((data->pwm_ctl[1] << 4) |
|
|
data->pwm_ctl[0]));
|
|
vt1211_write8(data, VT1211_REG_FAN_DIV,
|
|
((data->fan_div[1] << 6) |
|
|
(data->fan_div[0] << 4) |
|
|
data->fan_ctl));
|
|
break;
|
|
case SHOW_SET_PWM_FREQ:
|
|
val = 135000 / SENSORS_LIMIT(val, 135000 >> 7, 135000);
|
|
/* calculate tmp = log2(val) */
|
|
tmp = 0;
|
|
for (val >>= 1; val > 0; val >>= 1) {
|
|
tmp++;
|
|
}
|
|
/* sync the data cache */
|
|
reg = vt1211_read8(data, VT1211_REG_PWM_CLK);
|
|
data->pwm_clk = (reg & 0xf8) | tmp;
|
|
vt1211_write8(data, VT1211_REG_PWM_CLK, data->pwm_clk);
|
|
break;
|
|
case SHOW_SET_PWM_AUTO_CHANNELS_TEMP:
|
|
if ((val < 1) || (val > 7)) {
|
|
count = -EINVAL;
|
|
dev_warn(dev, "temp channel %ld not supported. "
|
|
"Choose a value between 1 and 7.\n", val);
|
|
goto EXIT;
|
|
}
|
|
if (!ISTEMP(val - 1, data->uch_config)) {
|
|
count = -EINVAL;
|
|
dev_warn(dev, "temp channel %ld is not available.\n",
|
|
val);
|
|
goto EXIT;
|
|
}
|
|
/* sync the data cache */
|
|
reg = vt1211_read8(data, VT1211_REG_PWM_CTL);
|
|
data->pwm_ctl[0] = reg & 0xf;
|
|
data->pwm_ctl[1] = (reg >> 4) & 0xf;
|
|
data->pwm_ctl[ix] = (data->pwm_ctl[ix] & 8) | (val - 1);
|
|
vt1211_write8(data, VT1211_REG_PWM_CTL,
|
|
((data->pwm_ctl[1] << 4) | data->pwm_ctl[0]));
|
|
break;
|
|
default:
|
|
dev_dbg(dev, "Unknown attr fetch (%d)\n", fn);
|
|
}
|
|
|
|
EXIT:
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* PWM auto point definitions
|
|
* ix = [0-1]
|
|
* ap = [0-3]
|
|
* --------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* pwm[ix+1]_auto_point[ap+1]_temp mapping table:
|
|
* Note that there is only a single set of temp auto points that controls both
|
|
* PWM controllers. We still create 2 sets of sysfs files to make it look
|
|
* more consistent even though they map to the same registers.
|
|
*
|
|
* ix ap : description
|
|
* -------------------
|
|
* 0 0 : pwm1/2 off temperature (pwm_auto_temp[0])
|
|
* 0 1 : pwm1/2 low speed temperature (pwm_auto_temp[1])
|
|
* 0 2 : pwm1/2 high speed temperature (pwm_auto_temp[2])
|
|
* 0 3 : pwm1/2 full speed temperature (pwm_auto_temp[3])
|
|
* 1 0 : pwm1/2 off temperature (pwm_auto_temp[0])
|
|
* 1 1 : pwm1/2 low speed temperature (pwm_auto_temp[1])
|
|
* 1 2 : pwm1/2 high speed temperature (pwm_auto_temp[2])
|
|
* 1 3 : pwm1/2 full speed temperature (pwm_auto_temp[3])
|
|
*/
|
|
|
|
static ssize_t show_pwm_auto_point_temp(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt1211_data *data = vt1211_update_device(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int ap = sensor_attr_2->nr;
|
|
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->pwm_ctl[ix] & 7,
|
|
data->pwm_auto_temp[ap]));
|
|
}
|
|
|
|
static ssize_t set_pwm_auto_point_temp(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int ap = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
int reg;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
/* sync the data cache */
|
|
reg = vt1211_read8(data, VT1211_REG_PWM_CTL);
|
|
data->pwm_ctl[0] = reg & 0xf;
|
|
data->pwm_ctl[1] = (reg >> 4) & 0xf;
|
|
|
|
data->pwm_auto_temp[ap] = TEMP_TO_REG(data->pwm_ctl[ix] & 7, val);
|
|
vt1211_write8(data, VT1211_REG_PWM_AUTO_TEMP(ap),
|
|
data->pwm_auto_temp[ap]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* pwm[ix+1]_auto_point[ap+1]_pwm mapping table:
|
|
* Note that the PWM auto points 0 & 3 are hard-wired in the VT1211 and can't
|
|
* be changed.
|
|
*
|
|
* ix ap : description
|
|
* -------------------
|
|
* 0 0 : pwm1 off (pwm_auto_pwm[0][0], hard-wired to 0)
|
|
* 0 1 : pwm1 low speed duty cycle (pwm_auto_pwm[0][1])
|
|
* 0 2 : pwm1 high speed duty cycle (pwm_auto_pwm[0][2])
|
|
* 0 3 : pwm1 full speed (pwm_auto_pwm[0][3], hard-wired to 255)
|
|
* 1 0 : pwm2 off (pwm_auto_pwm[1][0], hard-wired to 0)
|
|
* 1 1 : pwm2 low speed duty cycle (pwm_auto_pwm[1][1])
|
|
* 1 2 : pwm2 high speed duty cycle (pwm_auto_pwm[1][2])
|
|
* 1 3 : pwm2 full speed (pwm_auto_pwm[1][3], hard-wired to 255)
|
|
*/
|
|
|
|
static ssize_t show_pwm_auto_point_pwm(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt1211_data *data = vt1211_update_device(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int ap = sensor_attr_2->nr;
|
|
|
|
return sprintf(buf, "%d\n", data->pwm_auto_pwm[ix][ap]);
|
|
}
|
|
|
|
static ssize_t set_pwm_auto_point_pwm(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2 *sensor_attr_2 =
|
|
to_sensor_dev_attr_2(attr);
|
|
int ix = sensor_attr_2->index;
|
|
int ap = sensor_attr_2->nr;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
if ((val < 0) || (val > 255)) {
|
|
dev_err(dev, "pwm value %ld is out of range. "
|
|
"Choose a value between 0 and 255.\n" , val);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->pwm_auto_pwm[ix][ap] = val;
|
|
vt1211_write8(data, VT1211_REG_PWM_AUTO_PWM(ix, ap),
|
|
data->pwm_auto_pwm[ix][ap]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Miscellaneous sysfs interfaces (VRM, VID, name, and (legacy) alarms)
|
|
* --------------------------------------------------------------------- */
|
|
|
|
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", data->vrm);
|
|
}
|
|
|
|
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
data->vrm = val;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_vid(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
|
|
}
|
|
|
|
static ssize_t show_name(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct vt1211_data *data = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%s\n", data->name);
|
|
}
|
|
|
|
static ssize_t show_alarms(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct vt1211_data *data = vt1211_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", data->alarms);
|
|
}
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Device attribute structs
|
|
* --------------------------------------------------------------------- */
|
|
|
|
#define SENSOR_ATTR_IN_INPUT(ix) \
|
|
SENSOR_ATTR_2(in##ix##_input, S_IRUGO, \
|
|
show_in, NULL, SHOW_IN_INPUT, ix)
|
|
|
|
static struct sensor_device_attribute_2 vt1211_sysfs_in_input[] = {
|
|
SENSOR_ATTR_IN_INPUT(0),
|
|
SENSOR_ATTR_IN_INPUT(1),
|
|
SENSOR_ATTR_IN_INPUT(2),
|
|
SENSOR_ATTR_IN_INPUT(3),
|
|
SENSOR_ATTR_IN_INPUT(4),
|
|
SENSOR_ATTR_IN_INPUT(5),
|
|
};
|
|
|
|
#define SENSOR_ATTR_IN_MIN(ix) \
|
|
SENSOR_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \
|
|
show_in, set_in, SHOW_SET_IN_MIN, ix)
|
|
|
|
static struct sensor_device_attribute_2 vt1211_sysfs_in_min[] = {
|
|
SENSOR_ATTR_IN_MIN(0),
|
|
SENSOR_ATTR_IN_MIN(1),
|
|
SENSOR_ATTR_IN_MIN(2),
|
|
SENSOR_ATTR_IN_MIN(3),
|
|
SENSOR_ATTR_IN_MIN(4),
|
|
SENSOR_ATTR_IN_MIN(5),
|
|
};
|
|
|
|
#define SENSOR_ATTR_IN_MAX(ix) \
|
|
SENSOR_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \
|
|
show_in, set_in, SHOW_SET_IN_MAX, ix)
|
|
|
|
static struct sensor_device_attribute_2 vt1211_sysfs_in_max[] = {
|
|
SENSOR_ATTR_IN_MAX(0),
|
|
SENSOR_ATTR_IN_MAX(1),
|
|
SENSOR_ATTR_IN_MAX(2),
|
|
SENSOR_ATTR_IN_MAX(3),
|
|
SENSOR_ATTR_IN_MAX(4),
|
|
SENSOR_ATTR_IN_MAX(5),
|
|
};
|
|
|
|
#define SENSOR_ATTR_IN_ALARM(ix) \
|
|
SENSOR_ATTR_2(in##ix##_alarm, S_IRUGO, \
|
|
show_in, NULL, SHOW_IN_ALARM, ix)
|
|
|
|
static struct sensor_device_attribute_2 vt1211_sysfs_in_alarm[] = {
|
|
SENSOR_ATTR_IN_ALARM(0),
|
|
SENSOR_ATTR_IN_ALARM(1),
|
|
SENSOR_ATTR_IN_ALARM(2),
|
|
SENSOR_ATTR_IN_ALARM(3),
|
|
SENSOR_ATTR_IN_ALARM(4),
|
|
SENSOR_ATTR_IN_ALARM(5),
|
|
};
|
|
|
|
#define SENSOR_ATTR_TEMP_INPUT(ix) \
|
|
SENSOR_ATTR_2(temp##ix##_input, S_IRUGO, \
|
|
show_temp, NULL, SHOW_TEMP_INPUT, ix-1)
|
|
|
|
static struct sensor_device_attribute_2 vt1211_sysfs_temp_input[] = {
|
|
SENSOR_ATTR_TEMP_INPUT(1),
|
|
SENSOR_ATTR_TEMP_INPUT(2),
|
|
SENSOR_ATTR_TEMP_INPUT(3),
|
|
SENSOR_ATTR_TEMP_INPUT(4),
|
|
SENSOR_ATTR_TEMP_INPUT(5),
|
|
SENSOR_ATTR_TEMP_INPUT(6),
|
|
SENSOR_ATTR_TEMP_INPUT(7),
|
|
};
|
|
|
|
#define SENSOR_ATTR_TEMP_MAX(ix) \
|
|
SENSOR_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \
|
|
show_temp, set_temp, SHOW_SET_TEMP_MAX, ix-1)
|
|
|
|
static struct sensor_device_attribute_2 vt1211_sysfs_temp_max[] = {
|
|
SENSOR_ATTR_TEMP_MAX(1),
|
|
SENSOR_ATTR_TEMP_MAX(2),
|
|
SENSOR_ATTR_TEMP_MAX(3),
|
|
SENSOR_ATTR_TEMP_MAX(4),
|
|
SENSOR_ATTR_TEMP_MAX(5),
|
|
SENSOR_ATTR_TEMP_MAX(6),
|
|
SENSOR_ATTR_TEMP_MAX(7),
|
|
};
|
|
|
|
#define SENSOR_ATTR_TEMP_MAX_HYST(ix) \
|
|
SENSOR_ATTR_2(temp##ix##_max_hyst, S_IRUGO | S_IWUSR, \
|
|
show_temp, set_temp, SHOW_SET_TEMP_MAX_HYST, ix-1)
|
|
|
|
static struct sensor_device_attribute_2 vt1211_sysfs_temp_max_hyst[] = {
|
|
SENSOR_ATTR_TEMP_MAX_HYST(1),
|
|
SENSOR_ATTR_TEMP_MAX_HYST(2),
|
|
SENSOR_ATTR_TEMP_MAX_HYST(3),
|
|
SENSOR_ATTR_TEMP_MAX_HYST(4),
|
|
SENSOR_ATTR_TEMP_MAX_HYST(5),
|
|
SENSOR_ATTR_TEMP_MAX_HYST(6),
|
|
SENSOR_ATTR_TEMP_MAX_HYST(7),
|
|
};
|
|
|
|
#define SENSOR_ATTR_TEMP_ALARM(ix) \
|
|
SENSOR_ATTR_2(temp##ix##_alarm, S_IRUGO, \
|
|
show_temp, NULL, SHOW_TEMP_ALARM, ix-1)
|
|
|
|
static struct sensor_device_attribute_2 vt1211_sysfs_temp_alarm[] = {
|
|
SENSOR_ATTR_TEMP_ALARM(1),
|
|
SENSOR_ATTR_TEMP_ALARM(2),
|
|
SENSOR_ATTR_TEMP_ALARM(3),
|
|
SENSOR_ATTR_TEMP_ALARM(4),
|
|
SENSOR_ATTR_TEMP_ALARM(5),
|
|
SENSOR_ATTR_TEMP_ALARM(6),
|
|
SENSOR_ATTR_TEMP_ALARM(7),
|
|
};
|
|
|
|
#define SENSOR_ATTR_FAN(ix) \
|
|
SENSOR_ATTR_2(fan##ix##_input, S_IRUGO, \
|
|
show_fan, NULL, SHOW_FAN_INPUT, ix-1), \
|
|
SENSOR_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
|
|
show_fan, set_fan, SHOW_SET_FAN_MIN, ix-1), \
|
|
SENSOR_ATTR_2(fan##ix##_div, S_IRUGO | S_IWUSR, \
|
|
show_fan, set_fan, SHOW_SET_FAN_DIV, ix-1), \
|
|
SENSOR_ATTR_2(fan##ix##_alarm, S_IRUGO, \
|
|
show_fan, NULL, SHOW_FAN_ALARM, ix-1)
|
|
|
|
#define SENSOR_ATTR_PWM(ix) \
|
|
SENSOR_ATTR_2(pwm##ix, S_IRUGO, \
|
|
show_pwm, NULL, SHOW_PWM, ix-1), \
|
|
SENSOR_ATTR_2(pwm##ix##_enable, S_IRUGO | S_IWUSR, \
|
|
show_pwm, set_pwm, SHOW_SET_PWM_ENABLE, ix-1), \
|
|
SENSOR_ATTR_2(pwm##ix##_auto_channels_temp, S_IRUGO | S_IWUSR, \
|
|
show_pwm, set_pwm, SHOW_SET_PWM_AUTO_CHANNELS_TEMP, ix-1)
|
|
|
|
#define SENSOR_ATTR_PWM_FREQ(ix) \
|
|
SENSOR_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \
|
|
show_pwm, set_pwm, SHOW_SET_PWM_FREQ, ix-1)
|
|
|
|
#define SENSOR_ATTR_PWM_FREQ_RO(ix) \
|
|
SENSOR_ATTR_2(pwm##ix##_freq, S_IRUGO, \
|
|
show_pwm, NULL, SHOW_SET_PWM_FREQ, ix-1)
|
|
|
|
#define SENSOR_ATTR_PWM_AUTO_POINT_TEMP(ix, ap) \
|
|
SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_temp, S_IRUGO | S_IWUSR, \
|
|
show_pwm_auto_point_temp, set_pwm_auto_point_temp, \
|
|
ap-1, ix-1)
|
|
|
|
#define SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(ix, ap) \
|
|
SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_temp, S_IRUGO, \
|
|
show_pwm_auto_point_temp, NULL, \
|
|
ap-1, ix-1)
|
|
|
|
#define SENSOR_ATTR_PWM_AUTO_POINT_PWM(ix, ap) \
|
|
SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_pwm, S_IRUGO | S_IWUSR, \
|
|
show_pwm_auto_point_pwm, set_pwm_auto_point_pwm, \
|
|
ap-1, ix-1)
|
|
|
|
#define SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(ix, ap) \
|
|
SENSOR_ATTR_2(pwm##ix##_auto_point##ap##_pwm, S_IRUGO, \
|
|
show_pwm_auto_point_pwm, NULL, \
|
|
ap-1, ix-1)
|
|
|
|
static struct sensor_device_attribute_2 vt1211_sysfs_fan_pwm[] = {
|
|
SENSOR_ATTR_FAN(1),
|
|
SENSOR_ATTR_FAN(2),
|
|
SENSOR_ATTR_PWM(1),
|
|
SENSOR_ATTR_PWM(2),
|
|
SENSOR_ATTR_PWM_FREQ(1),
|
|
SENSOR_ATTR_PWM_FREQ_RO(2),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 1),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 2),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 3),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_TEMP(1, 4),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 1),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 2),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 3),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_TEMP_RO(2, 4),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(1, 1),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_PWM(1, 2),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_PWM(1, 3),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(1, 4),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(2, 1),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_PWM(2, 2),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_PWM(2, 3),
|
|
SENSOR_ATTR_PWM_AUTO_POINT_PWM_RO(2, 4),
|
|
};
|
|
|
|
static struct device_attribute vt1211_sysfs_misc[] = {
|
|
__ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm),
|
|
__ATTR(cpu0_vid, S_IRUGO, show_vid, NULL),
|
|
__ATTR(name, S_IRUGO, show_name, NULL),
|
|
__ATTR(alarms, S_IRUGO, show_alarms, NULL),
|
|
};
|
|
|
|
/* ---------------------------------------------------------------------
|
|
* Device registration and initialization
|
|
* --------------------------------------------------------------------- */
|
|
|
|
static void __devinit vt1211_init_device(struct vt1211_data *data)
|
|
{
|
|
/* set VRM */
|
|
data->vrm = vid_which_vrm();
|
|
|
|
/* Read (and initialize) UCH config */
|
|
data->uch_config = vt1211_read8(data, VT1211_REG_UCH_CONFIG);
|
|
if (uch_config > -1) {
|
|
data->uch_config = (data->uch_config & 0x83) |
|
|
(uch_config << 2);
|
|
vt1211_write8(data, VT1211_REG_UCH_CONFIG, data->uch_config);
|
|
}
|
|
|
|
/* Initialize the interrupt mode (if request at module load time).
|
|
* The VT1211 implements 3 different modes for clearing interrupts:
|
|
* 0: Clear INT when status register is read. Regenerate INT as long
|
|
* as temp stays above hysteresis limit.
|
|
* 1: Clear INT when status register is read. DON'T regenerate INT
|
|
* until temp falls below hysteresis limit and exceeds hot limit
|
|
* again.
|
|
* 2: Clear INT when temp falls below max limit.
|
|
*
|
|
* The driver only allows to force mode 0 since that's the only one
|
|
* that makes sense for 'sensors' */
|
|
if (int_mode == 0) {
|
|
vt1211_write8(data, VT1211_REG_TEMP1_CONFIG, 0);
|
|
vt1211_write8(data, VT1211_REG_TEMP2_CONFIG, 0);
|
|
}
|
|
|
|
/* Fill in some hard wired values into our data struct */
|
|
data->pwm_auto_pwm[0][3] = 255;
|
|
data->pwm_auto_pwm[1][3] = 255;
|
|
}
|
|
|
|
static void vt1211_remove_sysfs(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_in_input); i++) {
|
|
device_remove_file(dev,
|
|
&vt1211_sysfs_in_input[i].dev_attr);
|
|
device_remove_file(dev,
|
|
&vt1211_sysfs_in_min[i].dev_attr);
|
|
device_remove_file(dev,
|
|
&vt1211_sysfs_in_max[i].dev_attr);
|
|
device_remove_file(dev,
|
|
&vt1211_sysfs_in_alarm[i].dev_attr);
|
|
}
|
|
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_temp_input); i++) {
|
|
device_remove_file(dev,
|
|
&vt1211_sysfs_temp_input[i].dev_attr);
|
|
device_remove_file(dev,
|
|
&vt1211_sysfs_temp_max[i].dev_attr);
|
|
device_remove_file(dev,
|
|
&vt1211_sysfs_temp_max_hyst[i].dev_attr);
|
|
device_remove_file(dev,
|
|
&vt1211_sysfs_temp_alarm[i].dev_attr);
|
|
}
|
|
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_fan_pwm); i++) {
|
|
device_remove_file(dev,
|
|
&vt1211_sysfs_fan_pwm[i].dev_attr);
|
|
}
|
|
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_misc); i++) {
|
|
device_remove_file(dev, &vt1211_sysfs_misc[i]);
|
|
}
|
|
}
|
|
|
|
static int __devinit vt1211_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct vt1211_data *data;
|
|
struct resource *res;
|
|
int i, err;
|
|
|
|
if (!(data = kzalloc(sizeof(struct vt1211_data), GFP_KERNEL))) {
|
|
err = -ENOMEM;
|
|
dev_err(dev, "Out of memory\n");
|
|
goto EXIT;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) {
|
|
err = -EBUSY;
|
|
dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
|
|
(unsigned long)res->start, (unsigned long)res->end);
|
|
goto EXIT_KFREE;
|
|
}
|
|
data->addr = res->start;
|
|
data->name = DRVNAME;
|
|
mutex_init(&data->update_lock);
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
/* Initialize the VT1211 chip */
|
|
vt1211_init_device(data);
|
|
|
|
/* Create sysfs interface files */
|
|
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_in_input); i++) {
|
|
if (ISVOLT(i, data->uch_config)) {
|
|
if ((err = device_create_file(dev,
|
|
&vt1211_sysfs_in_input[i].dev_attr)) ||
|
|
(err = device_create_file(dev,
|
|
&vt1211_sysfs_in_min[i].dev_attr)) ||
|
|
(err = device_create_file(dev,
|
|
&vt1211_sysfs_in_max[i].dev_attr)) ||
|
|
(err = device_create_file(dev,
|
|
&vt1211_sysfs_in_alarm[i].dev_attr))) {
|
|
goto EXIT_DEV_REMOVE;
|
|
}
|
|
}
|
|
}
|
|
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_temp_input); i++) {
|
|
if (ISTEMP(i, data->uch_config)) {
|
|
if ((err = device_create_file(dev,
|
|
&vt1211_sysfs_temp_input[i].dev_attr)) ||
|
|
(err = device_create_file(dev,
|
|
&vt1211_sysfs_temp_max[i].dev_attr)) ||
|
|
(err = device_create_file(dev,
|
|
&vt1211_sysfs_temp_max_hyst[i].dev_attr)) ||
|
|
(err = device_create_file(dev,
|
|
&vt1211_sysfs_temp_alarm[i].dev_attr))) {
|
|
goto EXIT_DEV_REMOVE;
|
|
}
|
|
}
|
|
}
|
|
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_fan_pwm); i++) {
|
|
err = device_create_file(dev,
|
|
&vt1211_sysfs_fan_pwm[i].dev_attr);
|
|
if (err) {
|
|
goto EXIT_DEV_REMOVE;
|
|
}
|
|
}
|
|
for (i = 0; i < ARRAY_SIZE(vt1211_sysfs_misc); i++) {
|
|
err = device_create_file(dev,
|
|
&vt1211_sysfs_misc[i]);
|
|
if (err) {
|
|
goto EXIT_DEV_REMOVE;
|
|
}
|
|
}
|
|
|
|
/* Register device */
|
|
data->hwmon_dev = hwmon_device_register(dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
dev_err(dev, "Class registration failed (%d)\n", err);
|
|
goto EXIT_DEV_REMOVE_SILENT;
|
|
}
|
|
|
|
return 0;
|
|
|
|
EXIT_DEV_REMOVE:
|
|
dev_err(dev, "Sysfs interface creation failed (%d)\n", err);
|
|
EXIT_DEV_REMOVE_SILENT:
|
|
vt1211_remove_sysfs(pdev);
|
|
release_region(res->start, res->end - res->start + 1);
|
|
EXIT_KFREE:
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(data);
|
|
EXIT:
|
|
return err;
|
|
}
|
|
|
|
static int __devexit vt1211_remove(struct platform_device *pdev)
|
|
{
|
|
struct vt1211_data *data = platform_get_drvdata(pdev);
|
|
struct resource *res;
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
vt1211_remove_sysfs(pdev);
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(data);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
release_region(res->start, res->end - res->start + 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver vt1211_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = DRVNAME,
|
|
},
|
|
.probe = vt1211_probe,
|
|
.remove = __devexit_p(vt1211_remove),
|
|
};
|
|
|
|
static int __init vt1211_device_add(unsigned short address)
|
|
{
|
|
struct resource res = {
|
|
.start = address,
|
|
.end = address + 0x7f,
|
|
.flags = IORESOURCE_IO,
|
|
};
|
|
int err;
|
|
|
|
pdev = platform_device_alloc(DRVNAME, address);
|
|
if (!pdev) {
|
|
err = -ENOMEM;
|
|
printk(KERN_ERR DRVNAME ": Device allocation failed (%d)\n",
|
|
err);
|
|
goto EXIT;
|
|
}
|
|
|
|
res.name = pdev->name;
|
|
err = acpi_check_resource_conflict(&res);
|
|
if (err)
|
|
goto EXIT_DEV_PUT;
|
|
|
|
err = platform_device_add_resources(pdev, &res, 1);
|
|
if (err) {
|
|
printk(KERN_ERR DRVNAME ": Device resource addition failed "
|
|
"(%d)\n", err);
|
|
goto EXIT_DEV_PUT;
|
|
}
|
|
|
|
err = platform_device_add(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
|
|
err);
|
|
goto EXIT_DEV_PUT;
|
|
}
|
|
|
|
return 0;
|
|
|
|
EXIT_DEV_PUT:
|
|
platform_device_put(pdev);
|
|
EXIT:
|
|
return err;
|
|
}
|
|
|
|
static int __init vt1211_find(int sio_cip, unsigned short *address)
|
|
{
|
|
int err = -ENODEV;
|
|
int devid;
|
|
|
|
superio_enter(sio_cip);
|
|
|
|
devid = force_id ? force_id : superio_inb(sio_cip, SIO_VT1211_DEVID);
|
|
if (devid != SIO_VT1211_ID) {
|
|
goto EXIT;
|
|
}
|
|
|
|
superio_select(sio_cip, SIO_VT1211_LDN_HWMON);
|
|
|
|
if ((superio_inb(sio_cip, SIO_VT1211_ACTIVE) & 1) == 0) {
|
|
printk(KERN_WARNING DRVNAME ": HW monitor is disabled, "
|
|
"skipping\n");
|
|
goto EXIT;
|
|
}
|
|
|
|
*address = ((superio_inb(sio_cip, SIO_VT1211_BADDR) << 8) |
|
|
(superio_inb(sio_cip, SIO_VT1211_BADDR + 1))) & 0xff00;
|
|
if (*address == 0) {
|
|
printk(KERN_WARNING DRVNAME ": Base address is not set, "
|
|
"skipping\n");
|
|
goto EXIT;
|
|
}
|
|
|
|
err = 0;
|
|
printk(KERN_INFO DRVNAME ": Found VT1211 chip at 0x%04x, "
|
|
"revision %u\n", *address,
|
|
superio_inb(sio_cip, SIO_VT1211_DEVREV));
|
|
|
|
EXIT:
|
|
superio_exit(sio_cip);
|
|
return err;
|
|
}
|
|
|
|
static int __init vt1211_init(void)
|
|
{
|
|
int err;
|
|
unsigned short address = 0;
|
|
|
|
if ((err = vt1211_find(SIO_REG_CIP1, &address)) &&
|
|
(err = vt1211_find(SIO_REG_CIP2, &address))) {
|
|
goto EXIT;
|
|
}
|
|
|
|
if ((uch_config < -1) || (uch_config > 31)) {
|
|
err = -EINVAL;
|
|
printk(KERN_WARNING DRVNAME ": Invalid UCH configuration %d. "
|
|
"Choose a value between 0 and 31.\n", uch_config);
|
|
goto EXIT;
|
|
}
|
|
|
|
if ((int_mode < -1) || (int_mode > 0)) {
|
|
err = -EINVAL;
|
|
printk(KERN_WARNING DRVNAME ": Invalid interrupt mode %d. "
|
|
"Only mode 0 is supported.\n", int_mode);
|
|
goto EXIT;
|
|
}
|
|
|
|
err = platform_driver_register(&vt1211_driver);
|
|
if (err) {
|
|
goto EXIT;
|
|
}
|
|
|
|
/* Sets global pdev as a side effect */
|
|
err = vt1211_device_add(address);
|
|
if (err) {
|
|
goto EXIT_DRV_UNREGISTER;
|
|
}
|
|
|
|
return 0;
|
|
|
|
EXIT_DRV_UNREGISTER:
|
|
platform_driver_unregister(&vt1211_driver);
|
|
EXIT:
|
|
return err;
|
|
}
|
|
|
|
static void __exit vt1211_exit(void)
|
|
{
|
|
platform_device_unregister(pdev);
|
|
platform_driver_unregister(&vt1211_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>");
|
|
MODULE_DESCRIPTION("VT1211 sensors");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(vt1211_init);
|
|
module_exit(vt1211_exit);
|