mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-24 17:59:32 +00:00
![Deepak Saxena](/assets/img/avatar_default.png)
Use kzalloc instead of kmalloc+memset in all hardware monitoring drivers. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
585 lines
18 KiB
C
585 lines
18 KiB
C
/*
|
|
* adm1025.c
|
|
*
|
|
* Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com>
|
|
* Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
|
|
*
|
|
* The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
|
|
* voltages (including its own power source) and up to two temperatures
|
|
* (its own plus up to one external one). Voltages are scaled internally
|
|
* (which is not the common way) with ratios such that the nominal value
|
|
* of each voltage correspond to a register value of 192 (which means a
|
|
* resolution of about 0.5% of the nominal value). Temperature values are
|
|
* reported with a 1 deg resolution and a 3 deg accuracy. Complete
|
|
* datasheet can be obtained from Analog's website at:
|
|
* http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html
|
|
*
|
|
* This driver also supports the ADM1025A, which differs from the ADM1025
|
|
* only in that it has "open-drain VID inputs while the ADM1025 has
|
|
* on-chip 100k pull-ups on the VID inputs". It doesn't make any
|
|
* difference for us.
|
|
*
|
|
* This driver also supports the NE1619, a sensor chip made by Philips.
|
|
* That chip is similar to the ADM1025A, with a few differences. The only
|
|
* difference that matters to us is that the NE1619 has only two possible
|
|
* addresses while the ADM1025A has a third one. Complete datasheet can be
|
|
* obtained from Philips's website at:
|
|
* http://www.semiconductors.philips.com/pip/NE1619DS.html
|
|
*
|
|
* Since the ADM1025 was the first chipset supported by this driver, most
|
|
* comments will refer to this chipset, but are actually general and
|
|
* concern all supported chipsets, unless mentioned otherwise.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-vid.h>
|
|
#include <linux/err.h>
|
|
|
|
/*
|
|
* Addresses to scan
|
|
* ADM1025 and ADM1025A have three possible addresses: 0x2c, 0x2d and 0x2e.
|
|
* NE1619 has two possible addresses: 0x2c and 0x2d.
|
|
*/
|
|
|
|
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
|
|
|
|
/*
|
|
* Insmod parameters
|
|
*/
|
|
|
|
I2C_CLIENT_INSMOD_2(adm1025, ne1619);
|
|
|
|
/*
|
|
* The ADM1025 registers
|
|
*/
|
|
|
|
#define ADM1025_REG_MAN_ID 0x3E
|
|
#define ADM1025_REG_CHIP_ID 0x3F
|
|
#define ADM1025_REG_CONFIG 0x40
|
|
#define ADM1025_REG_STATUS1 0x41
|
|
#define ADM1025_REG_STATUS2 0x42
|
|
#define ADM1025_REG_IN(nr) (0x20 + (nr))
|
|
#define ADM1025_REG_IN_MAX(nr) (0x2B + (nr) * 2)
|
|
#define ADM1025_REG_IN_MIN(nr) (0x2C + (nr) * 2)
|
|
#define ADM1025_REG_TEMP(nr) (0x26 + (nr))
|
|
#define ADM1025_REG_TEMP_HIGH(nr) (0x37 + (nr) * 2)
|
|
#define ADM1025_REG_TEMP_LOW(nr) (0x38 + (nr) * 2)
|
|
#define ADM1025_REG_VID 0x47
|
|
#define ADM1025_REG_VID4 0x49
|
|
|
|
/*
|
|
* Conversions and various macros
|
|
* The ADM1025 uses signed 8-bit values for temperatures.
|
|
*/
|
|
|
|
static int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
|
|
|
|
#define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192)
|
|
#define IN_TO_REG(val,scale) ((val) <= 0 ? 0 : \
|
|
(val) * 192 >= (scale) * 255 ? 255 : \
|
|
((val) * 192 + (scale)/2) / (scale))
|
|
|
|
#define TEMP_FROM_REG(reg) ((reg) * 1000)
|
|
#define TEMP_TO_REG(val) ((val) <= -127500 ? -128 : \
|
|
(val) >= 126500 ? 127 : \
|
|
(((val) < 0 ? (val)-500 : (val)+500) / 1000))
|
|
|
|
/*
|
|
* Functions declaration
|
|
*/
|
|
|
|
static int adm1025_attach_adapter(struct i2c_adapter *adapter);
|
|
static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind);
|
|
static void adm1025_init_client(struct i2c_client *client);
|
|
static int adm1025_detach_client(struct i2c_client *client);
|
|
static struct adm1025_data *adm1025_update_device(struct device *dev);
|
|
|
|
/*
|
|
* Driver data (common to all clients)
|
|
*/
|
|
|
|
static struct i2c_driver adm1025_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "adm1025",
|
|
.id = I2C_DRIVERID_ADM1025,
|
|
.flags = I2C_DF_NOTIFY,
|
|
.attach_adapter = adm1025_attach_adapter,
|
|
.detach_client = adm1025_detach_client,
|
|
};
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
|
|
struct adm1025_data {
|
|
struct i2c_client client;
|
|
struct class_device *class_dev;
|
|
struct semaphore update_lock;
|
|
char valid; /* zero until following fields are valid */
|
|
unsigned long last_updated; /* in jiffies */
|
|
|
|
u8 in[6]; /* register value */
|
|
u8 in_max[6]; /* register value */
|
|
u8 in_min[6]; /* register value */
|
|
s8 temp[2]; /* register value */
|
|
s8 temp_min[2]; /* register value */
|
|
s8 temp_max[2]; /* register value */
|
|
u16 alarms; /* register values, combined */
|
|
u8 vid; /* register values, combined */
|
|
u8 vrm;
|
|
};
|
|
|
|
/*
|
|
* Sysfs stuff
|
|
*/
|
|
|
|
#define show_in(offset) \
|
|
static ssize_t show_in##offset(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct adm1025_data *data = adm1025_update_device(dev); \
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \
|
|
in_scale[offset])); \
|
|
} \
|
|
static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct adm1025_data *data = adm1025_update_device(dev); \
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \
|
|
in_scale[offset])); \
|
|
} \
|
|
static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct adm1025_data *data = adm1025_update_device(dev); \
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \
|
|
in_scale[offset])); \
|
|
} \
|
|
static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);
|
|
show_in(0);
|
|
show_in(1);
|
|
show_in(2);
|
|
show_in(3);
|
|
show_in(4);
|
|
show_in(5);
|
|
|
|
#define show_temp(offset) \
|
|
static ssize_t show_temp##offset(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct adm1025_data *data = adm1025_update_device(dev); \
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \
|
|
} \
|
|
static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct adm1025_data *data = adm1025_update_device(dev); \
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \
|
|
} \
|
|
static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct adm1025_data *data = adm1025_update_device(dev); \
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \
|
|
}\
|
|
static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp##offset, NULL);
|
|
show_temp(1);
|
|
show_temp(2);
|
|
|
|
#define set_in(offset) \
|
|
static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
|
|
size_t count) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct adm1025_data *data = i2c_get_clientdata(client); \
|
|
long val = simple_strtol(buf, NULL, 10); \
|
|
\
|
|
down(&data->update_lock); \
|
|
data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \
|
|
i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \
|
|
data->in_min[offset]); \
|
|
up(&data->update_lock); \
|
|
return count; \
|
|
} \
|
|
static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
|
|
size_t count) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct adm1025_data *data = i2c_get_clientdata(client); \
|
|
long val = simple_strtol(buf, NULL, 10); \
|
|
\
|
|
down(&data->update_lock); \
|
|
data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \
|
|
i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \
|
|
data->in_max[offset]); \
|
|
up(&data->update_lock); \
|
|
return count; \
|
|
} \
|
|
static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
|
|
show_in##offset##_min, set_in##offset##_min); \
|
|
static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
|
|
show_in##offset##_max, set_in##offset##_max);
|
|
set_in(0);
|
|
set_in(1);
|
|
set_in(2);
|
|
set_in(3);
|
|
set_in(4);
|
|
set_in(5);
|
|
|
|
#define set_temp(offset) \
|
|
static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
|
|
size_t count) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct adm1025_data *data = i2c_get_clientdata(client); \
|
|
long val = simple_strtol(buf, NULL, 10); \
|
|
\
|
|
down(&data->update_lock); \
|
|
data->temp_min[offset-1] = TEMP_TO_REG(val); \
|
|
i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \
|
|
data->temp_min[offset-1]); \
|
|
up(&data->update_lock); \
|
|
return count; \
|
|
} \
|
|
static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \
|
|
size_t count) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct adm1025_data *data = i2c_get_clientdata(client); \
|
|
long val = simple_strtol(buf, NULL, 10); \
|
|
\
|
|
down(&data->update_lock); \
|
|
data->temp_max[offset-1] = TEMP_TO_REG(val); \
|
|
i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \
|
|
data->temp_max[offset-1]); \
|
|
up(&data->update_lock); \
|
|
return count; \
|
|
} \
|
|
static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
|
|
show_temp##offset##_min, set_temp##offset##_min); \
|
|
static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
|
|
show_temp##offset##_max, set_temp##offset##_max);
|
|
set_temp(1);
|
|
set_temp(2);
|
|
|
|
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%u\n", data->alarms);
|
|
}
|
|
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
|
|
|
|
static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
|
|
}
|
|
/* in1_ref is deprecated in favour of cpu0_vid, remove after 2005-11-11 */
|
|
static DEVICE_ATTR(in1_ref, S_IRUGO, show_vid, NULL);
|
|
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
|
|
|
|
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%u\n", data->vrm);
|
|
}
|
|
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct adm1025_data *data = i2c_get_clientdata(client);
|
|
data->vrm = simple_strtoul(buf, NULL, 10);
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
|
|
|
|
/*
|
|
* Real code
|
|
*/
|
|
|
|
static int adm1025_attach_adapter(struct i2c_adapter *adapter)
|
|
{
|
|
if (!(adapter->class & I2C_CLASS_HWMON))
|
|
return 0;
|
|
return i2c_probe(adapter, &addr_data, adm1025_detect);
|
|
}
|
|
|
|
/*
|
|
* The following function does more than just detection. If detection
|
|
* succeeds, it also registers the new chip.
|
|
*/
|
|
static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
|
|
{
|
|
struct i2c_client *new_client;
|
|
struct adm1025_data *data;
|
|
int err = 0;
|
|
const char *name = "";
|
|
u8 config;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
goto exit;
|
|
|
|
if (!(data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL))) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
/* The common I2C client data is placed right before the
|
|
ADM1025-specific data. */
|
|
new_client = &data->client;
|
|
i2c_set_clientdata(new_client, data);
|
|
new_client->addr = address;
|
|
new_client->adapter = adapter;
|
|
new_client->driver = &adm1025_driver;
|
|
new_client->flags = 0;
|
|
|
|
/*
|
|
* Now we do the remaining detection. A negative kind means that
|
|
* the driver was loaded with no force parameter (default), so we
|
|
* must both detect and identify the chip. A zero kind means that
|
|
* the driver was loaded with the force parameter, the detection
|
|
* step shall be skipped. A positive kind means that the driver
|
|
* was loaded with the force parameter and a given kind of chip is
|
|
* requested, so both the detection and the identification steps
|
|
* are skipped.
|
|
*/
|
|
config = i2c_smbus_read_byte_data(new_client, ADM1025_REG_CONFIG);
|
|
if (kind < 0) { /* detection */
|
|
if ((config & 0x80) != 0x00
|
|
|| (i2c_smbus_read_byte_data(new_client,
|
|
ADM1025_REG_STATUS1) & 0xC0) != 0x00
|
|
|| (i2c_smbus_read_byte_data(new_client,
|
|
ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
|
|
dev_dbg(&adapter->dev,
|
|
"ADM1025 detection failed at 0x%02x.\n",
|
|
address);
|
|
goto exit_free;
|
|
}
|
|
}
|
|
|
|
if (kind <= 0) { /* identification */
|
|
u8 man_id, chip_id;
|
|
|
|
man_id = i2c_smbus_read_byte_data(new_client,
|
|
ADM1025_REG_MAN_ID);
|
|
chip_id = i2c_smbus_read_byte_data(new_client,
|
|
ADM1025_REG_CHIP_ID);
|
|
|
|
if (man_id == 0x41) { /* Analog Devices */
|
|
if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */
|
|
kind = adm1025;
|
|
}
|
|
} else
|
|
if (man_id == 0xA1) { /* Philips */
|
|
if (address != 0x2E
|
|
&& (chip_id & 0xF0) == 0x20) { /* NE1619 */
|
|
kind = ne1619;
|
|
}
|
|
}
|
|
|
|
if (kind <= 0) { /* identification failed */
|
|
dev_info(&adapter->dev,
|
|
"Unsupported chip (man_id=0x%02X, "
|
|
"chip_id=0x%02X).\n", man_id, chip_id);
|
|
goto exit_free;
|
|
}
|
|
}
|
|
|
|
if (kind == adm1025) {
|
|
name = "adm1025";
|
|
} else if (kind == ne1619) {
|
|
name = "ne1619";
|
|
}
|
|
|
|
/* We can fill in the remaining client fields */
|
|
strlcpy(new_client->name, name, I2C_NAME_SIZE);
|
|
data->valid = 0;
|
|
init_MUTEX(&data->update_lock);
|
|
|
|
/* Tell the I2C layer a new client has arrived */
|
|
if ((err = i2c_attach_client(new_client)))
|
|
goto exit_free;
|
|
|
|
/* Initialize the ADM1025 chip */
|
|
adm1025_init_client(new_client);
|
|
|
|
/* Register sysfs hooks */
|
|
data->class_dev = hwmon_device_register(&new_client->dev);
|
|
if (IS_ERR(data->class_dev)) {
|
|
err = PTR_ERR(data->class_dev);
|
|
goto exit_detach;
|
|
}
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in0_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in1_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in2_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in3_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in5_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in0_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in1_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in2_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in3_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in5_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in0_max);
|
|
device_create_file(&new_client->dev, &dev_attr_in1_max);
|
|
device_create_file(&new_client->dev, &dev_attr_in2_max);
|
|
device_create_file(&new_client->dev, &dev_attr_in3_max);
|
|
device_create_file(&new_client->dev, &dev_attr_in5_max);
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_input);
|
|
device_create_file(&new_client->dev, &dev_attr_temp2_input);
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_min);
|
|
device_create_file(&new_client->dev, &dev_attr_temp2_min);
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_max);
|
|
device_create_file(&new_client->dev, &dev_attr_temp2_max);
|
|
device_create_file(&new_client->dev, &dev_attr_alarms);
|
|
/* in1_ref is deprecated, remove after 2005-11-11 */
|
|
device_create_file(&new_client->dev, &dev_attr_in1_ref);
|
|
device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
|
|
device_create_file(&new_client->dev, &dev_attr_vrm);
|
|
|
|
/* Pin 11 is either in4 (+12V) or VID4 */
|
|
if (!(config & 0x20)) {
|
|
device_create_file(&new_client->dev, &dev_attr_in4_input);
|
|
device_create_file(&new_client->dev, &dev_attr_in4_min);
|
|
device_create_file(&new_client->dev, &dev_attr_in4_max);
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_detach:
|
|
i2c_detach_client(new_client);
|
|
exit_free:
|
|
kfree(data);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static void adm1025_init_client(struct i2c_client *client)
|
|
{
|
|
u8 reg;
|
|
struct adm1025_data *data = i2c_get_clientdata(client);
|
|
int i;
|
|
|
|
data->vrm = vid_which_vrm();
|
|
|
|
/*
|
|
* Set high limits
|
|
* Usually we avoid setting limits on driver init, but it happens
|
|
* that the ADM1025 comes with stupid default limits (all registers
|
|
* set to 0). In case the chip has not gone through any limit
|
|
* setting yet, we better set the high limits to the max so that
|
|
* no alarm triggers.
|
|
*/
|
|
for (i=0; i<6; i++) {
|
|
reg = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_IN_MAX(i));
|
|
if (reg == 0)
|
|
i2c_smbus_write_byte_data(client,
|
|
ADM1025_REG_IN_MAX(i),
|
|
0xFF);
|
|
}
|
|
for (i=0; i<2; i++) {
|
|
reg = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_TEMP_HIGH(i));
|
|
if (reg == 0)
|
|
i2c_smbus_write_byte_data(client,
|
|
ADM1025_REG_TEMP_HIGH(i),
|
|
0x7F);
|
|
}
|
|
|
|
/*
|
|
* Start the conversions
|
|
*/
|
|
reg = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
|
|
if (!(reg & 0x01))
|
|
i2c_smbus_write_byte_data(client, ADM1025_REG_CONFIG,
|
|
(reg&0x7E)|0x01);
|
|
}
|
|
|
|
static int adm1025_detach_client(struct i2c_client *client)
|
|
{
|
|
struct adm1025_data *data = i2c_get_clientdata(client);
|
|
int err;
|
|
|
|
hwmon_device_unregister(data->class_dev);
|
|
|
|
if ((err = i2c_detach_client(client)))
|
|
return err;
|
|
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
static struct adm1025_data *adm1025_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct adm1025_data *data = i2c_get_clientdata(client);
|
|
|
|
down(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
|
|
int i;
|
|
|
|
dev_dbg(&client->dev, "Updating data.\n");
|
|
for (i=0; i<6; i++) {
|
|
data->in[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_IN(i));
|
|
data->in_min[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_IN_MIN(i));
|
|
data->in_max[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_IN_MAX(i));
|
|
}
|
|
for (i=0; i<2; i++) {
|
|
data->temp[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_TEMP(i));
|
|
data->temp_min[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_TEMP_LOW(i));
|
|
data->temp_max[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_TEMP_HIGH(i));
|
|
}
|
|
data->alarms = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_STATUS1)
|
|
| (i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_STATUS2) << 8);
|
|
data->vid = (i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_VID) & 0x0f)
|
|
| ((i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_VID4) & 0x01) << 4);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
up(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
static int __init sensors_adm1025_init(void)
|
|
{
|
|
return i2c_add_driver(&adm1025_driver);
|
|
}
|
|
|
|
static void __exit sensors_adm1025_exit(void)
|
|
{
|
|
i2c_del_driver(&adm1025_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
|
|
MODULE_DESCRIPTION("ADM1025 driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sensors_adm1025_init);
|
|
module_exit(sensors_adm1025_exit);
|