mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-24 17:59:32 +00:00
![Al Viro](/assets/img/avatar_default.png)
result of comma operator is not an lvalue Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
1206 lines
34 KiB
C
1206 lines
34 KiB
C
/* atarilance.c: Ethernet driver for VME Lance cards on the Atari */
|
||
/*
|
||
Written 1995/96 by Roman Hodek (Roman.Hodek@informatik.uni-erlangen.de)
|
||
|
||
This software may be used and distributed according to the terms
|
||
of the GNU General Public License, incorporated herein by reference.
|
||
|
||
This drivers was written with the following sources of reference:
|
||
- The driver for the Riebl Lance card by the TU Vienna.
|
||
- The modified TUW driver for PAM's VME cards
|
||
- The PC-Linux driver for Lance cards (but this is for bus master
|
||
cards, not the shared memory ones)
|
||
- The Amiga Ariadne driver
|
||
|
||
v1.0: (in 1.2.13pl4/0.9.13)
|
||
Initial version
|
||
v1.1: (in 1.2.13pl5)
|
||
more comments
|
||
deleted some debugging stuff
|
||
optimized register access (keep AREG pointing to CSR0)
|
||
following AMD, CSR0_STRT should be set only after IDON is detected
|
||
use memcpy() for data transfers, that also employs long word moves
|
||
better probe procedure for 24-bit systems
|
||
non-VME-RieblCards need extra delays in memcpy
|
||
must also do write test, since 0xfxe00000 may hit ROM
|
||
use 8/32 tx/rx buffers, which should give better NFS performance;
|
||
this is made possible by shifting the last packet buffer after the
|
||
RieblCard reserved area
|
||
v1.2: (in 1.2.13pl8)
|
||
again fixed probing for the Falcon; 0xfe01000 hits phys. 0x00010000
|
||
and thus RAM, in case of no Lance found all memory contents have to
|
||
be restored!
|
||
Now possible to compile as module.
|
||
v1.3: 03/30/96 Jes Sorensen, Roman (in 1.3)
|
||
Several little 1.3 adaptions
|
||
When the lance is stopped it jumps back into little-endian
|
||
mode. It is therefore necessary to put it back where it
|
||
belongs, in big endian mode, in order to make things work.
|
||
This might be the reason why multicast-mode didn't work
|
||
before, but I'm not able to test it as I only got an Amiga
|
||
(we had similar problems with the A2065 driver).
|
||
|
||
*/
|
||
|
||
static char version[] = "atarilance.c: v1.3 04/04/96 "
|
||
"Roman.Hodek@informatik.uni-erlangen.de\n";
|
||
|
||
#include <linux/netdevice.h>
|
||
#include <linux/etherdevice.h>
|
||
#include <linux/module.h>
|
||
#include <linux/stddef.h>
|
||
#include <linux/kernel.h>
|
||
#include <linux/string.h>
|
||
#include <linux/errno.h>
|
||
#include <linux/skbuff.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/init.h>
|
||
#include <linux/bitops.h>
|
||
|
||
#include <asm/setup.h>
|
||
#include <asm/irq.h>
|
||
#include <asm/atarihw.h>
|
||
#include <asm/atariints.h>
|
||
#include <asm/io.h>
|
||
|
||
/* Debug level:
|
||
* 0 = silent, print only serious errors
|
||
* 1 = normal, print error messages
|
||
* 2 = debug, print debug infos
|
||
* 3 = debug, print even more debug infos (packet data)
|
||
*/
|
||
|
||
#define LANCE_DEBUG 1
|
||
|
||
#ifdef LANCE_DEBUG
|
||
static int lance_debug = LANCE_DEBUG;
|
||
#else
|
||
static int lance_debug = 1;
|
||
#endif
|
||
MODULE_PARM(lance_debug, "i");
|
||
MODULE_PARM_DESC(lance_debug, "atarilance debug level (0-3)");
|
||
MODULE_LICENSE("GPL");
|
||
|
||
/* Print debug messages on probing? */
|
||
#undef LANCE_DEBUG_PROBE
|
||
|
||
#define DPRINTK(n,a) \
|
||
do { \
|
||
if (lance_debug >= n) \
|
||
printk a; \
|
||
} while( 0 )
|
||
|
||
#ifdef LANCE_DEBUG_PROBE
|
||
# define PROBE_PRINT(a) printk a
|
||
#else
|
||
# define PROBE_PRINT(a)
|
||
#endif
|
||
|
||
/* These define the number of Rx and Tx buffers as log2. (Only powers
|
||
* of two are valid)
|
||
* Much more rx buffers (32) are reserved than tx buffers (8), since receiving
|
||
* is more time critical then sending and packets may have to remain in the
|
||
* board's memory when main memory is low.
|
||
*/
|
||
|
||
#define TX_LOG_RING_SIZE 3
|
||
#define RX_LOG_RING_SIZE 5
|
||
|
||
/* These are the derived values */
|
||
|
||
#define TX_RING_SIZE (1 << TX_LOG_RING_SIZE)
|
||
#define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5)
|
||
#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
|
||
|
||
#define RX_RING_SIZE (1 << RX_LOG_RING_SIZE)
|
||
#define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5)
|
||
#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
|
||
|
||
#define TX_TIMEOUT 20
|
||
|
||
/* The LANCE Rx and Tx ring descriptors. */
|
||
struct lance_rx_head {
|
||
unsigned short base; /* Low word of base addr */
|
||
volatile unsigned char flag;
|
||
unsigned char base_hi; /* High word of base addr (unused) */
|
||
short buf_length; /* This length is 2s complement! */
|
||
volatile short msg_length; /* This length is "normal". */
|
||
};
|
||
|
||
struct lance_tx_head {
|
||
unsigned short base; /* Low word of base addr */
|
||
volatile unsigned char flag;
|
||
unsigned char base_hi; /* High word of base addr (unused) */
|
||
short length; /* Length is 2s complement! */
|
||
volatile short misc;
|
||
};
|
||
|
||
struct ringdesc {
|
||
unsigned short adr_lo; /* Low 16 bits of address */
|
||
unsigned char len; /* Length bits */
|
||
unsigned char adr_hi; /* High 8 bits of address (unused) */
|
||
};
|
||
|
||
/* The LANCE initialization block, described in databook. */
|
||
struct lance_init_block {
|
||
unsigned short mode; /* Pre-set mode */
|
||
unsigned char hwaddr[6]; /* Physical ethernet address */
|
||
unsigned filter[2]; /* Multicast filter (unused). */
|
||
/* Receive and transmit ring base, along with length bits. */
|
||
struct ringdesc rx_ring;
|
||
struct ringdesc tx_ring;
|
||
};
|
||
|
||
/* The whole layout of the Lance shared memory */
|
||
struct lance_memory {
|
||
struct lance_init_block init;
|
||
struct lance_tx_head tx_head[TX_RING_SIZE];
|
||
struct lance_rx_head rx_head[RX_RING_SIZE];
|
||
char packet_area[0]; /* packet data follow after the
|
||
* init block and the ring
|
||
* descriptors and are located
|
||
* at runtime */
|
||
};
|
||
|
||
/* RieblCard specifics:
|
||
* The original TOS driver for these cards reserves the area from offset
|
||
* 0xee70 to 0xeebb for storing configuration data. Of interest to us is the
|
||
* Ethernet address there, and the magic for verifying the data's validity.
|
||
* The reserved area isn't touch by packet buffers. Furthermore, offset 0xfffe
|
||
* is reserved for the interrupt vector number.
|
||
*/
|
||
#define RIEBL_RSVD_START 0xee70
|
||
#define RIEBL_RSVD_END 0xeec0
|
||
#define RIEBL_MAGIC 0x09051990
|
||
#define RIEBL_MAGIC_ADDR ((unsigned long *)(((char *)MEM) + 0xee8a))
|
||
#define RIEBL_HWADDR_ADDR ((unsigned char *)(((char *)MEM) + 0xee8e))
|
||
#define RIEBL_IVEC_ADDR ((unsigned short *)(((char *)MEM) + 0xfffe))
|
||
|
||
/* This is a default address for the old RieblCards without a battery
|
||
* that have no ethernet address at boot time. 00:00:36:04 is the
|
||
* prefix for Riebl cards, the 00:00 at the end is arbitrary.
|
||
*/
|
||
|
||
static unsigned char OldRieblDefHwaddr[6] = {
|
||
0x00, 0x00, 0x36, 0x04, 0x00, 0x00
|
||
};
|
||
|
||
|
||
/* I/O registers of the Lance chip */
|
||
|
||
struct lance_ioreg {
|
||
/* base+0x0 */ volatile unsigned short data;
|
||
/* base+0x2 */ volatile unsigned short addr;
|
||
unsigned char _dummy1[3];
|
||
/* base+0x7 */ volatile unsigned char ivec;
|
||
unsigned char _dummy2[5];
|
||
/* base+0xd */ volatile unsigned char eeprom;
|
||
unsigned char _dummy3;
|
||
/* base+0xf */ volatile unsigned char mem;
|
||
};
|
||
|
||
/* Types of boards this driver supports */
|
||
|
||
enum lance_type {
|
||
OLD_RIEBL, /* old Riebl card without battery */
|
||
NEW_RIEBL, /* new Riebl card with battery */
|
||
PAM_CARD /* PAM card with EEPROM */
|
||
};
|
||
|
||
static char *lance_names[] = {
|
||
"Riebl-Card (without battery)",
|
||
"Riebl-Card (with battery)",
|
||
"PAM intern card"
|
||
};
|
||
|
||
/* The driver's private device structure */
|
||
|
||
struct lance_private {
|
||
enum lance_type cardtype;
|
||
struct lance_ioreg *iobase;
|
||
struct lance_memory *mem;
|
||
int cur_rx, cur_tx; /* The next free ring entry */
|
||
int dirty_tx; /* Ring entries to be freed. */
|
||
/* copy function */
|
||
void *(*memcpy_f)( void *, const void *, size_t );
|
||
struct net_device_stats stats;
|
||
/* This must be long for set_bit() */
|
||
long tx_full;
|
||
spinlock_t devlock;
|
||
};
|
||
|
||
/* I/O register access macros */
|
||
|
||
#define MEM lp->mem
|
||
#define DREG IO->data
|
||
#define AREG IO->addr
|
||
#define REGA(a) (*( AREG = (a), &DREG ))
|
||
|
||
/* Definitions for packet buffer access: */
|
||
#define PKT_BUF_SZ 1544
|
||
/* Get the address of a packet buffer corresponding to a given buffer head */
|
||
#define PKTBUF_ADDR(head) (((unsigned char *)(MEM)) + (head)->base)
|
||
|
||
/* Possible memory/IO addresses for probing */
|
||
|
||
struct lance_addr {
|
||
unsigned long memaddr;
|
||
unsigned long ioaddr;
|
||
int slow_flag;
|
||
} lance_addr_list[] = {
|
||
{ 0xfe010000, 0xfe00fff0, 0 }, /* RieblCard VME in TT */
|
||
{ 0xffc10000, 0xffc0fff0, 0 }, /* RieblCard VME in MegaSTE
|
||
(highest byte stripped) */
|
||
{ 0xffe00000, 0xffff7000, 1 }, /* RieblCard in ST
|
||
(highest byte stripped) */
|
||
{ 0xffd00000, 0xffff7000, 1 }, /* RieblCard in ST with hw modif. to
|
||
avoid conflict with ROM
|
||
(highest byte stripped) */
|
||
{ 0xffcf0000, 0xffcffff0, 0 }, /* PAMCard VME in TT and MSTE
|
||
(highest byte stripped) */
|
||
{ 0xfecf0000, 0xfecffff0, 0 }, /* Rhotron's PAMCard VME in TT and MSTE
|
||
(highest byte stripped) */
|
||
};
|
||
|
||
#define N_LANCE_ADDR (sizeof(lance_addr_list)/sizeof(*lance_addr_list))
|
||
|
||
|
||
/* Definitions for the Lance */
|
||
|
||
/* tx_head flags */
|
||
#define TMD1_ENP 0x01 /* end of packet */
|
||
#define TMD1_STP 0x02 /* start of packet */
|
||
#define TMD1_DEF 0x04 /* deferred */
|
||
#define TMD1_ONE 0x08 /* one retry needed */
|
||
#define TMD1_MORE 0x10 /* more than one retry needed */
|
||
#define TMD1_ERR 0x40 /* error summary */
|
||
#define TMD1_OWN 0x80 /* ownership (set: chip owns) */
|
||
|
||
#define TMD1_OWN_CHIP TMD1_OWN
|
||
#define TMD1_OWN_HOST 0
|
||
|
||
/* tx_head misc field */
|
||
#define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */
|
||
#define TMD3_RTRY 0x0400 /* failed after 16 retries */
|
||
#define TMD3_LCAR 0x0800 /* carrier lost */
|
||
#define TMD3_LCOL 0x1000 /* late collision */
|
||
#define TMD3_UFLO 0x4000 /* underflow (late memory) */
|
||
#define TMD3_BUFF 0x8000 /* buffering error (no ENP) */
|
||
|
||
/* rx_head flags */
|
||
#define RMD1_ENP 0x01 /* end of packet */
|
||
#define RMD1_STP 0x02 /* start of packet */
|
||
#define RMD1_BUFF 0x04 /* buffer error */
|
||
#define RMD1_CRC 0x08 /* CRC error */
|
||
#define RMD1_OFLO 0x10 /* overflow */
|
||
#define RMD1_FRAM 0x20 /* framing error */
|
||
#define RMD1_ERR 0x40 /* error summary */
|
||
#define RMD1_OWN 0x80 /* ownership (set: ship owns) */
|
||
|
||
#define RMD1_OWN_CHIP RMD1_OWN
|
||
#define RMD1_OWN_HOST 0
|
||
|
||
/* register names */
|
||
#define CSR0 0 /* mode/status */
|
||
#define CSR1 1 /* init block addr (low) */
|
||
#define CSR2 2 /* init block addr (high) */
|
||
#define CSR3 3 /* misc */
|
||
#define CSR8 8 /* address filter */
|
||
#define CSR15 15 /* promiscuous mode */
|
||
|
||
/* CSR0 */
|
||
/* (R=readable, W=writeable, S=set on write, C=clear on write) */
|
||
#define CSR0_INIT 0x0001 /* initialize (RS) */
|
||
#define CSR0_STRT 0x0002 /* start (RS) */
|
||
#define CSR0_STOP 0x0004 /* stop (RS) */
|
||
#define CSR0_TDMD 0x0008 /* transmit demand (RS) */
|
||
#define CSR0_TXON 0x0010 /* transmitter on (R) */
|
||
#define CSR0_RXON 0x0020 /* receiver on (R) */
|
||
#define CSR0_INEA 0x0040 /* interrupt enable (RW) */
|
||
#define CSR0_INTR 0x0080 /* interrupt active (R) */
|
||
#define CSR0_IDON 0x0100 /* initialization done (RC) */
|
||
#define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */
|
||
#define CSR0_RINT 0x0400 /* receiver interrupt (RC) */
|
||
#define CSR0_MERR 0x0800 /* memory error (RC) */
|
||
#define CSR0_MISS 0x1000 /* missed frame (RC) */
|
||
#define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */
|
||
#define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */
|
||
#define CSR0_ERR 0x8000 /* error (RC) */
|
||
|
||
/* CSR3 */
|
||
#define CSR3_BCON 0x0001 /* byte control */
|
||
#define CSR3_ACON 0x0002 /* ALE control */
|
||
#define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */
|
||
|
||
|
||
|
||
/***************************** Prototypes *****************************/
|
||
|
||
static int addr_accessible( volatile void *regp, int wordflag, int
|
||
writeflag );
|
||
static unsigned long lance_probe1( struct net_device *dev, struct lance_addr
|
||
*init_rec );
|
||
static int lance_open( struct net_device *dev );
|
||
static void lance_init_ring( struct net_device *dev );
|
||
static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
|
||
static irqreturn_t lance_interrupt( int irq, void *dev_id, struct pt_regs *fp );
|
||
static int lance_rx( struct net_device *dev );
|
||
static int lance_close( struct net_device *dev );
|
||
static struct net_device_stats *lance_get_stats( struct net_device *dev );
|
||
static void set_multicast_list( struct net_device *dev );
|
||
static int lance_set_mac_address( struct net_device *dev, void *addr );
|
||
static void lance_tx_timeout (struct net_device *dev);
|
||
|
||
/************************* End of Prototypes **************************/
|
||
|
||
|
||
|
||
|
||
|
||
static void *slow_memcpy( void *dst, const void *src, size_t len )
|
||
|
||
{ char *cto = dst;
|
||
const char *cfrom = src;
|
||
|
||
while( len-- ) {
|
||
*cto++ = *cfrom++;
|
||
MFPDELAY();
|
||
}
|
||
return( dst );
|
||
}
|
||
|
||
|
||
struct net_device * __init atarilance_probe(int unit)
|
||
{
|
||
int i;
|
||
static int found;
|
||
struct net_device *dev;
|
||
int err = -ENODEV;
|
||
|
||
if (!MACH_IS_ATARI || found)
|
||
/* Assume there's only one board possible... That seems true, since
|
||
* the Riebl/PAM board's address cannot be changed. */
|
||
return ERR_PTR(-ENODEV);
|
||
|
||
dev = alloc_etherdev(sizeof(struct lance_private));
|
||
if (!dev)
|
||
return ERR_PTR(-ENOMEM);
|
||
if (unit >= 0) {
|
||
sprintf(dev->name, "eth%d", unit);
|
||
netdev_boot_setup_check(dev);
|
||
}
|
||
SET_MODULE_OWNER(dev);
|
||
|
||
for( i = 0; i < N_LANCE_ADDR; ++i ) {
|
||
if (lance_probe1( dev, &lance_addr_list[i] )) {
|
||
found = 1;
|
||
err = register_netdev(dev);
|
||
if (!err)
|
||
return dev;
|
||
free_irq(dev->irq, dev);
|
||
break;
|
||
}
|
||
}
|
||
free_netdev(dev);
|
||
return ERR_PTR(err);
|
||
}
|
||
|
||
|
||
/* Derived from hwreg_present() in atari/config.c: */
|
||
|
||
static int __init addr_accessible( volatile void *regp, int wordflag, int writeflag )
|
||
{
|
||
int ret;
|
||
long flags;
|
||
long *vbr, save_berr;
|
||
|
||
local_irq_save(flags);
|
||
|
||
__asm__ __volatile__ ( "movec %/vbr,%0" : "=r" (vbr) : );
|
||
save_berr = vbr[2];
|
||
|
||
__asm__ __volatile__
|
||
( "movel %/sp,%/d1\n\t"
|
||
"movel #Lberr,%2@\n\t"
|
||
"moveq #0,%0\n\t"
|
||
"tstl %3\n\t"
|
||
"bne 1f\n\t"
|
||
"moveb %1@,%/d0\n\t"
|
||
"nop \n\t"
|
||
"bra 2f\n"
|
||
"1: movew %1@,%/d0\n\t"
|
||
"nop \n"
|
||
"2: tstl %4\n\t"
|
||
"beq 2f\n\t"
|
||
"tstl %3\n\t"
|
||
"bne 1f\n\t"
|
||
"clrb %1@\n\t"
|
||
"nop \n\t"
|
||
"moveb %/d0,%1@\n\t"
|
||
"nop \n\t"
|
||
"bra 2f\n"
|
||
"1: clrw %1@\n\t"
|
||
"nop \n\t"
|
||
"movew %/d0,%1@\n\t"
|
||
"nop \n"
|
||
"2: moveq #1,%0\n"
|
||
"Lberr: movel %/d1,%/sp"
|
||
: "=&d" (ret)
|
||
: "a" (regp), "a" (&vbr[2]), "rm" (wordflag), "rm" (writeflag)
|
||
: "d0", "d1", "memory"
|
||
);
|
||
|
||
vbr[2] = save_berr;
|
||
local_irq_restore(flags);
|
||
|
||
return( ret );
|
||
}
|
||
|
||
|
||
static unsigned long __init lance_probe1( struct net_device *dev,
|
||
struct lance_addr *init_rec )
|
||
{
|
||
volatile unsigned short *memaddr =
|
||
(volatile unsigned short *)init_rec->memaddr;
|
||
volatile unsigned short *ioaddr =
|
||
(volatile unsigned short *)init_rec->ioaddr;
|
||
struct lance_private *lp;
|
||
struct lance_ioreg *IO;
|
||
int i;
|
||
static int did_version;
|
||
unsigned short save1, save2;
|
||
|
||
PROBE_PRINT(( "Probing for Lance card at mem %#lx io %#lx\n",
|
||
(long)memaddr, (long)ioaddr ));
|
||
|
||
/* Test whether memory readable and writable */
|
||
PROBE_PRINT(( "lance_probe1: testing memory to be accessible\n" ));
|
||
if (!addr_accessible( memaddr, 1, 1 )) goto probe_fail;
|
||
|
||
/* Written values should come back... */
|
||
PROBE_PRINT(( "lance_probe1: testing memory to be writable (1)\n" ));
|
||
save1 = *memaddr;
|
||
*memaddr = 0x0001;
|
||
if (*memaddr != 0x0001) goto probe_fail;
|
||
PROBE_PRINT(( "lance_probe1: testing memory to be writable (2)\n" ));
|
||
*memaddr = 0x0000;
|
||
if (*memaddr != 0x0000) goto probe_fail;
|
||
*memaddr = save1;
|
||
|
||
/* First port should be readable and writable */
|
||
PROBE_PRINT(( "lance_probe1: testing ioport to be accessible\n" ));
|
||
if (!addr_accessible( ioaddr, 1, 1 )) goto probe_fail;
|
||
|
||
/* and written values should be readable */
|
||
PROBE_PRINT(( "lance_probe1: testing ioport to be writeable\n" ));
|
||
save2 = ioaddr[1];
|
||
ioaddr[1] = 0x0001;
|
||
if (ioaddr[1] != 0x0001) goto probe_fail;
|
||
|
||
/* The CSR0_INIT bit should not be readable */
|
||
PROBE_PRINT(( "lance_probe1: testing CSR0 register function (1)\n" ));
|
||
save1 = ioaddr[0];
|
||
ioaddr[1] = CSR0;
|
||
ioaddr[0] = CSR0_INIT | CSR0_STOP;
|
||
if (ioaddr[0] != CSR0_STOP) {
|
||
ioaddr[0] = save1;
|
||
ioaddr[1] = save2;
|
||
goto probe_fail;
|
||
}
|
||
PROBE_PRINT(( "lance_probe1: testing CSR0 register function (2)\n" ));
|
||
ioaddr[0] = CSR0_STOP;
|
||
if (ioaddr[0] != CSR0_STOP) {
|
||
ioaddr[0] = save1;
|
||
ioaddr[1] = save2;
|
||
goto probe_fail;
|
||
}
|
||
|
||
/* Now ok... */
|
||
PROBE_PRINT(( "lance_probe1: Lance card detected\n" ));
|
||
goto probe_ok;
|
||
|
||
probe_fail:
|
||
return( 0 );
|
||
|
||
probe_ok:
|
||
lp = (struct lance_private *)dev->priv;
|
||
MEM = (struct lance_memory *)memaddr;
|
||
IO = lp->iobase = (struct lance_ioreg *)ioaddr;
|
||
dev->base_addr = (unsigned long)ioaddr; /* informational only */
|
||
lp->memcpy_f = init_rec->slow_flag ? slow_memcpy : memcpy;
|
||
|
||
REGA( CSR0 ) = CSR0_STOP;
|
||
|
||
/* Now test for type: If the eeprom I/O port is readable, it is a
|
||
* PAM card */
|
||
if (addr_accessible( &(IO->eeprom), 0, 0 )) {
|
||
/* Switch back to Ram */
|
||
i = IO->mem;
|
||
lp->cardtype = PAM_CARD;
|
||
}
|
||
else if (*RIEBL_MAGIC_ADDR == RIEBL_MAGIC) {
|
||
lp->cardtype = NEW_RIEBL;
|
||
}
|
||
else
|
||
lp->cardtype = OLD_RIEBL;
|
||
|
||
if (lp->cardtype == PAM_CARD ||
|
||
memaddr == (unsigned short *)0xffe00000) {
|
||
/* PAMs card and Riebl on ST use level 5 autovector */
|
||
if (request_irq(IRQ_AUTO_5, lance_interrupt, IRQ_TYPE_PRIO,
|
||
"PAM/Riebl-ST Ethernet", dev)) {
|
||
printk( "Lance: request for irq %d failed\n", IRQ_AUTO_5 );
|
||
return( 0 );
|
||
}
|
||
dev->irq = (unsigned short)IRQ_AUTO_5;
|
||
}
|
||
else {
|
||
/* For VME-RieblCards, request a free VME int;
|
||
* (This must be unsigned long, since dev->irq is short and the
|
||
* IRQ_MACHSPEC bit would be cut off...)
|
||
*/
|
||
unsigned long irq = atari_register_vme_int();
|
||
if (!irq) {
|
||
printk( "Lance: request for VME interrupt failed\n" );
|
||
return( 0 );
|
||
}
|
||
if (request_irq(irq, lance_interrupt, IRQ_TYPE_PRIO,
|
||
"Riebl-VME Ethernet", dev)) {
|
||
printk( "Lance: request for irq %ld failed\n", irq );
|
||
return( 0 );
|
||
}
|
||
dev->irq = irq;
|
||
}
|
||
|
||
printk("%s: %s at io %#lx, mem %#lx, irq %d%s, hwaddr ",
|
||
dev->name, lance_names[lp->cardtype],
|
||
(unsigned long)ioaddr,
|
||
(unsigned long)memaddr,
|
||
dev->irq,
|
||
init_rec->slow_flag ? " (slow memcpy)" : "" );
|
||
|
||
/* Get the ethernet address */
|
||
switch( lp->cardtype ) {
|
||
case OLD_RIEBL:
|
||
/* No ethernet address! (Set some default address) */
|
||
memcpy( dev->dev_addr, OldRieblDefHwaddr, 6 );
|
||
break;
|
||
case NEW_RIEBL:
|
||
lp->memcpy_f( dev->dev_addr, RIEBL_HWADDR_ADDR, 6 );
|
||
break;
|
||
case PAM_CARD:
|
||
i = IO->eeprom;
|
||
for( i = 0; i < 6; ++i )
|
||
dev->dev_addr[i] =
|
||
((((unsigned short *)MEM)[i*2] & 0x0f) << 4) |
|
||
((((unsigned short *)MEM)[i*2+1] & 0x0f));
|
||
i = IO->mem;
|
||
break;
|
||
}
|
||
for( i = 0; i < 6; ++i )
|
||
printk( "%02x%s", dev->dev_addr[i], (i < 5) ? ":" : "\n" );
|
||
if (lp->cardtype == OLD_RIEBL) {
|
||
printk( "%s: Warning: This is a default ethernet address!\n",
|
||
dev->name );
|
||
printk( " Use \"ifconfig hw ether ...\" to set the address.\n" );
|
||
}
|
||
|
||
spin_lock_init(&lp->devlock);
|
||
|
||
MEM->init.mode = 0x0000; /* Disable Rx and Tx. */
|
||
for( i = 0; i < 6; i++ )
|
||
MEM->init.hwaddr[i] = dev->dev_addr[i^1]; /* <- 16 bit swap! */
|
||
MEM->init.filter[0] = 0x00000000;
|
||
MEM->init.filter[1] = 0x00000000;
|
||
MEM->init.rx_ring.adr_lo = offsetof( struct lance_memory, rx_head );
|
||
MEM->init.rx_ring.adr_hi = 0;
|
||
MEM->init.rx_ring.len = RX_RING_LEN_BITS;
|
||
MEM->init.tx_ring.adr_lo = offsetof( struct lance_memory, tx_head );
|
||
MEM->init.tx_ring.adr_hi = 0;
|
||
MEM->init.tx_ring.len = TX_RING_LEN_BITS;
|
||
|
||
if (lp->cardtype == PAM_CARD)
|
||
IO->ivec = IRQ_SOURCE_TO_VECTOR(dev->irq);
|
||
else
|
||
*RIEBL_IVEC_ADDR = IRQ_SOURCE_TO_VECTOR(dev->irq);
|
||
|
||
if (did_version++ == 0)
|
||
DPRINTK( 1, ( version ));
|
||
|
||
/* The LANCE-specific entries in the device structure. */
|
||
dev->open = &lance_open;
|
||
dev->hard_start_xmit = &lance_start_xmit;
|
||
dev->stop = &lance_close;
|
||
dev->get_stats = &lance_get_stats;
|
||
dev->set_multicast_list = &set_multicast_list;
|
||
dev->set_mac_address = &lance_set_mac_address;
|
||
|
||
/* XXX MSch */
|
||
dev->tx_timeout = lance_tx_timeout;
|
||
dev->watchdog_timeo = TX_TIMEOUT;
|
||
|
||
|
||
#if 0
|
||
dev->start = 0;
|
||
#endif
|
||
|
||
memset( &lp->stats, 0, sizeof(lp->stats) );
|
||
|
||
return( 1 );
|
||
}
|
||
|
||
|
||
static int lance_open( struct net_device *dev )
|
||
|
||
{ struct lance_private *lp = (struct lance_private *)dev->priv;
|
||
struct lance_ioreg *IO = lp->iobase;
|
||
int i;
|
||
|
||
DPRINTK( 2, ( "%s: lance_open()\n", dev->name ));
|
||
|
||
lance_init_ring(dev);
|
||
/* Re-initialize the LANCE, and start it when done. */
|
||
|
||
REGA( CSR3 ) = CSR3_BSWP | (lp->cardtype == PAM_CARD ? CSR3_ACON : 0);
|
||
REGA( CSR2 ) = 0;
|
||
REGA( CSR1 ) = 0;
|
||
REGA( CSR0 ) = CSR0_INIT;
|
||
/* From now on, AREG is kept to point to CSR0 */
|
||
|
||
i = 1000000;
|
||
while (--i > 0)
|
||
if (DREG & CSR0_IDON)
|
||
break;
|
||
if (i < 0 || (DREG & CSR0_ERR)) {
|
||
DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
|
||
dev->name, i, DREG ));
|
||
DREG = CSR0_STOP;
|
||
return( -EIO );
|
||
}
|
||
DREG = CSR0_IDON;
|
||
DREG = CSR0_STRT;
|
||
DREG = CSR0_INEA;
|
||
|
||
netif_start_queue (dev);
|
||
|
||
DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG ));
|
||
|
||
return( 0 );
|
||
}
|
||
|
||
|
||
/* Initialize the LANCE Rx and Tx rings. */
|
||
|
||
static void lance_init_ring( struct net_device *dev )
|
||
|
||
{ struct lance_private *lp = (struct lance_private *)dev->priv;
|
||
int i;
|
||
unsigned offset;
|
||
|
||
lp->tx_full = 0;
|
||
lp->cur_rx = lp->cur_tx = 0;
|
||
lp->dirty_tx = 0;
|
||
|
||
offset = offsetof( struct lance_memory, packet_area );
|
||
|
||
/* If the packet buffer at offset 'o' would conflict with the reserved area
|
||
* of RieblCards, advance it */
|
||
#define CHECK_OFFSET(o) \
|
||
do { \
|
||
if (lp->cardtype == OLD_RIEBL || lp->cardtype == NEW_RIEBL) { \
|
||
if (((o) < RIEBL_RSVD_START) ? (o)+PKT_BUF_SZ > RIEBL_RSVD_START \
|
||
: (o) < RIEBL_RSVD_END) \
|
||
(o) = RIEBL_RSVD_END; \
|
||
} \
|
||
} while(0)
|
||
|
||
for( i = 0; i < TX_RING_SIZE; i++ ) {
|
||
CHECK_OFFSET(offset);
|
||
MEM->tx_head[i].base = offset;
|
||
MEM->tx_head[i].flag = TMD1_OWN_HOST;
|
||
MEM->tx_head[i].base_hi = 0;
|
||
MEM->tx_head[i].length = 0;
|
||
MEM->tx_head[i].misc = 0;
|
||
offset += PKT_BUF_SZ;
|
||
}
|
||
|
||
for( i = 0; i < RX_RING_SIZE; i++ ) {
|
||
CHECK_OFFSET(offset);
|
||
MEM->rx_head[i].base = offset;
|
||
MEM->rx_head[i].flag = TMD1_OWN_CHIP;
|
||
MEM->rx_head[i].base_hi = 0;
|
||
MEM->rx_head[i].buf_length = -PKT_BUF_SZ;
|
||
MEM->rx_head[i].msg_length = 0;
|
||
offset += PKT_BUF_SZ;
|
||
}
|
||
}
|
||
|
||
|
||
/* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
|
||
|
||
|
||
static void lance_tx_timeout (struct net_device *dev)
|
||
{
|
||
struct lance_private *lp = (struct lance_private *) dev->priv;
|
||
struct lance_ioreg *IO = lp->iobase;
|
||
|
||
AREG = CSR0;
|
||
DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
|
||
dev->name, DREG ));
|
||
DREG = CSR0_STOP;
|
||
/*
|
||
* Always set BSWP after a STOP as STOP puts it back into
|
||
* little endian mode.
|
||
*/
|
||
REGA( CSR3 ) = CSR3_BSWP | (lp->cardtype == PAM_CARD ? CSR3_ACON : 0);
|
||
lp->stats.tx_errors++;
|
||
#ifndef final_version
|
||
{ int i;
|
||
DPRINTK( 2, ( "Ring data: dirty_tx %d cur_tx %d%s cur_rx %d\n",
|
||
lp->dirty_tx, lp->cur_tx,
|
||
lp->tx_full ? " (full)" : "",
|
||
lp->cur_rx ));
|
||
for( i = 0 ; i < RX_RING_SIZE; i++ )
|
||
DPRINTK( 2, ( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
|
||
i, MEM->rx_head[i].base,
|
||
-MEM->rx_head[i].buf_length,
|
||
MEM->rx_head[i].msg_length ));
|
||
for( i = 0 ; i < TX_RING_SIZE; i++ )
|
||
DPRINTK( 2, ( "tx #%d: base=%04x len=%04x misc=%04x\n",
|
||
i, MEM->tx_head[i].base,
|
||
-MEM->tx_head[i].length,
|
||
MEM->tx_head[i].misc ));
|
||
}
|
||
#endif
|
||
/* XXX MSch: maybe purge/reinit ring here */
|
||
/* lance_restart, essentially */
|
||
lance_init_ring(dev);
|
||
REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT;
|
||
dev->trans_start = jiffies;
|
||
netif_wake_queue (dev);
|
||
}
|
||
|
||
/* XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
|
||
|
||
static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
|
||
|
||
{ struct lance_private *lp = (struct lance_private *)dev->priv;
|
||
struct lance_ioreg *IO = lp->iobase;
|
||
int entry, len;
|
||
struct lance_tx_head *head;
|
||
unsigned long flags;
|
||
|
||
DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
|
||
dev->name, DREG ));
|
||
|
||
|
||
/* The old LANCE chips doesn't automatically pad buffers to min. size. */
|
||
len = skb->len;
|
||
if (len < ETH_ZLEN)
|
||
len = ETH_ZLEN;
|
||
/* PAM-Card has a bug: Can only send packets with even number of bytes! */
|
||
else if (lp->cardtype == PAM_CARD && (len & 1))
|
||
++len;
|
||
|
||
if (len > skb->len) {
|
||
skb = skb_padto(skb, len);
|
||
if (skb == NULL)
|
||
return 0;
|
||
}
|
||
|
||
netif_stop_queue (dev);
|
||
|
||
/* Fill in a Tx ring entry */
|
||
if (lance_debug >= 3) {
|
||
u_char *p;
|
||
int i;
|
||
printk( "%s: TX pkt type 0x%04x from ", dev->name,
|
||
((u_short *)skb->data)[6]);
|
||
for( p = &((u_char *)skb->data)[6], i = 0; i < 6; i++ )
|
||
printk("%02x%s", *p++, i != 5 ? ":" : "" );
|
||
printk(" to ");
|
||
for( p = (u_char *)skb->data, i = 0; i < 6; i++ )
|
||
printk("%02x%s", *p++, i != 5 ? ":" : "" );
|
||
printk(" data at 0x%08x len %d\n", (int)skb->data,
|
||
(int)skb->len );
|
||
}
|
||
|
||
/* We're not prepared for the int until the last flags are set/reset. And
|
||
* the int may happen already after setting the OWN_CHIP... */
|
||
spin_lock_irqsave (&lp->devlock, flags);
|
||
|
||
/* Mask to ring buffer boundary. */
|
||
entry = lp->cur_tx & TX_RING_MOD_MASK;
|
||
head = &(MEM->tx_head[entry]);
|
||
|
||
/* Caution: the write order is important here, set the "ownership" bits
|
||
* last.
|
||
*/
|
||
|
||
|
||
head->length = -len;
|
||
head->misc = 0;
|
||
lp->memcpy_f( PKTBUF_ADDR(head), (void *)skb->data, skb->len );
|
||
head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
|
||
lp->stats.tx_bytes += skb->len;
|
||
dev_kfree_skb( skb );
|
||
lp->cur_tx++;
|
||
while( lp->cur_tx >= TX_RING_SIZE && lp->dirty_tx >= TX_RING_SIZE ) {
|
||
lp->cur_tx -= TX_RING_SIZE;
|
||
lp->dirty_tx -= TX_RING_SIZE;
|
||
}
|
||
|
||
/* Trigger an immediate send poll. */
|
||
DREG = CSR0_INEA | CSR0_TDMD;
|
||
dev->trans_start = jiffies;
|
||
|
||
if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) ==
|
||
TMD1_OWN_HOST)
|
||
netif_start_queue (dev);
|
||
else
|
||
lp->tx_full = 1;
|
||
spin_unlock_irqrestore (&lp->devlock, flags);
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* The LANCE interrupt handler. */
|
||
|
||
static irqreturn_t lance_interrupt( int irq, void *dev_id, struct pt_regs *fp)
|
||
{
|
||
struct net_device *dev = dev_id;
|
||
struct lance_private *lp;
|
||
struct lance_ioreg *IO;
|
||
int csr0, boguscnt = 10;
|
||
int handled = 0;
|
||
|
||
if (dev == NULL) {
|
||
DPRINTK( 1, ( "lance_interrupt(): interrupt for unknown device.\n" ));
|
||
return IRQ_NONE;
|
||
}
|
||
|
||
lp = (struct lance_private *)dev->priv;
|
||
IO = lp->iobase;
|
||
spin_lock (&lp->devlock);
|
||
|
||
AREG = CSR0;
|
||
|
||
while( ((csr0 = DREG) & (CSR0_ERR | CSR0_TINT | CSR0_RINT)) &&
|
||
--boguscnt >= 0) {
|
||
handled = 1;
|
||
/* Acknowledge all of the current interrupt sources ASAP. */
|
||
DREG = csr0 & ~(CSR0_INIT | CSR0_STRT | CSR0_STOP |
|
||
CSR0_TDMD | CSR0_INEA);
|
||
|
||
DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n",
|
||
dev->name, csr0, DREG ));
|
||
|
||
if (csr0 & CSR0_RINT) /* Rx interrupt */
|
||
lance_rx( dev );
|
||
|
||
if (csr0 & CSR0_TINT) { /* Tx-done interrupt */
|
||
int dirty_tx = lp->dirty_tx;
|
||
|
||
while( dirty_tx < lp->cur_tx) {
|
||
int entry = dirty_tx & TX_RING_MOD_MASK;
|
||
int status = MEM->tx_head[entry].flag;
|
||
|
||
if (status & TMD1_OWN_CHIP)
|
||
break; /* It still hasn't been Txed */
|
||
|
||
MEM->tx_head[entry].flag = 0;
|
||
|
||
if (status & TMD1_ERR) {
|
||
/* There was an major error, log it. */
|
||
int err_status = MEM->tx_head[entry].misc;
|
||
lp->stats.tx_errors++;
|
||
if (err_status & TMD3_RTRY) lp->stats.tx_aborted_errors++;
|
||
if (err_status & TMD3_LCAR) lp->stats.tx_carrier_errors++;
|
||
if (err_status & TMD3_LCOL) lp->stats.tx_window_errors++;
|
||
if (err_status & TMD3_UFLO) {
|
||
/* Ackk! On FIFO errors the Tx unit is turned off! */
|
||
lp->stats.tx_fifo_errors++;
|
||
/* Remove this verbosity later! */
|
||
DPRINTK( 1, ( "%s: Tx FIFO error! Status %04x\n",
|
||
dev->name, csr0 ));
|
||
/* Restart the chip. */
|
||
DREG = CSR0_STRT;
|
||
}
|
||
} else {
|
||
if (status & (TMD1_MORE | TMD1_ONE | TMD1_DEF))
|
||
lp->stats.collisions++;
|
||
lp->stats.tx_packets++;
|
||
}
|
||
|
||
/* XXX MSch: free skb?? */
|
||
dirty_tx++;
|
||
}
|
||
|
||
#ifndef final_version
|
||
if (lp->cur_tx - dirty_tx >= TX_RING_SIZE) {
|
||
DPRINTK( 0, ( "out-of-sync dirty pointer,"
|
||
" %d vs. %d, full=%ld.\n",
|
||
dirty_tx, lp->cur_tx, lp->tx_full ));
|
||
dirty_tx += TX_RING_SIZE;
|
||
}
|
||
#endif
|
||
|
||
if (lp->tx_full && (netif_queue_stopped(dev))
|
||
&& dirty_tx > lp->cur_tx - TX_RING_SIZE + 2) {
|
||
/* The ring is no longer full, clear tbusy. */
|
||
lp->tx_full = 0;
|
||
netif_wake_queue (dev);
|
||
}
|
||
|
||
lp->dirty_tx = dirty_tx;
|
||
}
|
||
|
||
/* Log misc errors. */
|
||
if (csr0 & CSR0_BABL) lp->stats.tx_errors++; /* Tx babble. */
|
||
if (csr0 & CSR0_MISS) lp->stats.rx_errors++; /* Missed a Rx frame. */
|
||
if (csr0 & CSR0_MERR) {
|
||
DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
|
||
"status %04x.\n", dev->name, csr0 ));
|
||
/* Restart the chip. */
|
||
DREG = CSR0_STRT;
|
||
}
|
||
}
|
||
|
||
/* Clear any other interrupt, and set interrupt enable. */
|
||
DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
|
||
CSR0_IDON | CSR0_INEA;
|
||
|
||
DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
|
||
dev->name, DREG ));
|
||
|
||
spin_unlock (&lp->devlock);
|
||
return IRQ_RETVAL(handled);
|
||
}
|
||
|
||
|
||
static int lance_rx( struct net_device *dev )
|
||
|
||
{ struct lance_private *lp = (struct lance_private *)dev->priv;
|
||
int entry = lp->cur_rx & RX_RING_MOD_MASK;
|
||
int i;
|
||
|
||
DPRINTK( 2, ( "%s: rx int, flag=%04x\n", dev->name,
|
||
MEM->rx_head[entry].flag ));
|
||
|
||
/* If we own the next entry, it's a new packet. Send it up. */
|
||
while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) {
|
||
struct lance_rx_head *head = &(MEM->rx_head[entry]);
|
||
int status = head->flag;
|
||
|
||
if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */
|
||
/* There is a tricky error noted by John Murphy,
|
||
<murf@perftech.com> to Russ Nelson: Even with full-sized
|
||
buffers it's possible for a jabber packet to use two
|
||
buffers, with only the last correctly noting the error. */
|
||
if (status & RMD1_ENP) /* Only count a general error at the */
|
||
lp->stats.rx_errors++; /* end of a packet.*/
|
||
if (status & RMD1_FRAM) lp->stats.rx_frame_errors++;
|
||
if (status & RMD1_OFLO) lp->stats.rx_over_errors++;
|
||
if (status & RMD1_CRC) lp->stats.rx_crc_errors++;
|
||
if (status & RMD1_BUFF) lp->stats.rx_fifo_errors++;
|
||
head->flag &= (RMD1_ENP|RMD1_STP);
|
||
} else {
|
||
/* Malloc up new buffer, compatible with net-3. */
|
||
short pkt_len = head->msg_length & 0xfff;
|
||
struct sk_buff *skb;
|
||
|
||
if (pkt_len < 60) {
|
||
printk( "%s: Runt packet!\n", dev->name );
|
||
lp->stats.rx_errors++;
|
||
}
|
||
else {
|
||
skb = dev_alloc_skb( pkt_len+2 );
|
||
if (skb == NULL) {
|
||
DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n",
|
||
dev->name ));
|
||
for( i = 0; i < RX_RING_SIZE; i++ )
|
||
if (MEM->rx_head[(entry+i) & RX_RING_MOD_MASK].flag &
|
||
RMD1_OWN_CHIP)
|
||
break;
|
||
|
||
if (i > RX_RING_SIZE - 2) {
|
||
lp->stats.rx_dropped++;
|
||
head->flag |= RMD1_OWN_CHIP;
|
||
lp->cur_rx++;
|
||
}
|
||
break;
|
||
}
|
||
|
||
if (lance_debug >= 3) {
|
||
u_char *data = PKTBUF_ADDR(head), *p;
|
||
printk( "%s: RX pkt type 0x%04x from ", dev->name,
|
||
((u_short *)data)[6]);
|
||
for( p = &data[6], i = 0; i < 6; i++ )
|
||
printk("%02x%s", *p++, i != 5 ? ":" : "" );
|
||
printk(" to ");
|
||
for( p = data, i = 0; i < 6; i++ )
|
||
printk("%02x%s", *p++, i != 5 ? ":" : "" );
|
||
printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
|
||
"len %d\n",
|
||
data[15], data[16], data[17], data[18],
|
||
data[19], data[20], data[21], data[22],
|
||
pkt_len );
|
||
}
|
||
|
||
skb->dev = dev;
|
||
skb_reserve( skb, 2 ); /* 16 byte align */
|
||
skb_put( skb, pkt_len ); /* Make room */
|
||
lp->memcpy_f( skb->data, PKTBUF_ADDR(head), pkt_len );
|
||
skb->protocol = eth_type_trans( skb, dev );
|
||
netif_rx( skb );
|
||
dev->last_rx = jiffies;
|
||
lp->stats.rx_packets++;
|
||
lp->stats.rx_bytes += pkt_len;
|
||
}
|
||
}
|
||
|
||
head->flag |= RMD1_OWN_CHIP;
|
||
entry = (++lp->cur_rx) & RX_RING_MOD_MASK;
|
||
}
|
||
lp->cur_rx &= RX_RING_MOD_MASK;
|
||
|
||
/* From lance.c (Donald Becker): */
|
||
/* We should check that at least two ring entries are free. If not,
|
||
we should free one and mark stats->rx_dropped++. */
|
||
|
||
return 0;
|
||
}
|
||
|
||
|
||
static int lance_close( struct net_device *dev )
|
||
|
||
{ struct lance_private *lp = (struct lance_private *)dev->priv;
|
||
struct lance_ioreg *IO = lp->iobase;
|
||
|
||
netif_stop_queue (dev);
|
||
|
||
AREG = CSR0;
|
||
|
||
DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
|
||
dev->name, DREG ));
|
||
|
||
/* We stop the LANCE here -- it occasionally polls
|
||
memory if we don't. */
|
||
DREG = CSR0_STOP;
|
||
|
||
return 0;
|
||
}
|
||
|
||
|
||
static struct net_device_stats *lance_get_stats( struct net_device *dev )
|
||
|
||
{ struct lance_private *lp = (struct lance_private *)dev->priv;
|
||
|
||
return &lp->stats;
|
||
}
|
||
|
||
|
||
/* Set or clear the multicast filter for this adaptor.
|
||
num_addrs == -1 Promiscuous mode, receive all packets
|
||
num_addrs == 0 Normal mode, clear multicast list
|
||
num_addrs > 0 Multicast mode, receive normal and MC packets, and do
|
||
best-effort filtering.
|
||
*/
|
||
|
||
static void set_multicast_list( struct net_device *dev )
|
||
|
||
{ struct lance_private *lp = (struct lance_private *)dev->priv;
|
||
struct lance_ioreg *IO = lp->iobase;
|
||
|
||
if (netif_running(dev))
|
||
/* Only possible if board is already started */
|
||
return;
|
||
|
||
/* We take the simple way out and always enable promiscuous mode. */
|
||
DREG = CSR0_STOP; /* Temporarily stop the lance. */
|
||
|
||
if (dev->flags & IFF_PROMISC) {
|
||
/* Log any net taps. */
|
||
DPRINTK( 1, ( "%s: Promiscuous mode enabled.\n", dev->name ));
|
||
REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
|
||
} else {
|
||
short multicast_table[4];
|
||
int num_addrs = dev->mc_count;
|
||
int i;
|
||
/* We don't use the multicast table, but rely on upper-layer
|
||
* filtering. */
|
||
memset( multicast_table, (num_addrs == 0) ? 0 : -1,
|
||
sizeof(multicast_table) );
|
||
for( i = 0; i < 4; i++ )
|
||
REGA( CSR8+i ) = multicast_table[i];
|
||
REGA( CSR15 ) = 0; /* Unset promiscuous mode */
|
||
}
|
||
|
||
/*
|
||
* Always set BSWP after a STOP as STOP puts it back into
|
||
* little endian mode.
|
||
*/
|
||
REGA( CSR3 ) = CSR3_BSWP | (lp->cardtype == PAM_CARD ? CSR3_ACON : 0);
|
||
|
||
/* Resume normal operation and reset AREG to CSR0 */
|
||
REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT;
|
||
}
|
||
|
||
|
||
/* This is needed for old RieblCards and possible for new RieblCards */
|
||
|
||
static int lance_set_mac_address( struct net_device *dev, void *addr )
|
||
|
||
{ struct lance_private *lp = (struct lance_private *)dev->priv;
|
||
struct sockaddr *saddr = addr;
|
||
int i;
|
||
|
||
if (lp->cardtype != OLD_RIEBL && lp->cardtype != NEW_RIEBL)
|
||
return( -EOPNOTSUPP );
|
||
|
||
if (netif_running(dev)) {
|
||
/* Only possible while card isn't started */
|
||
DPRINTK( 1, ( "%s: hwaddr can be set only while card isn't open.\n",
|
||
dev->name ));
|
||
return( -EIO );
|
||
}
|
||
|
||
memcpy( dev->dev_addr, saddr->sa_data, dev->addr_len );
|
||
for( i = 0; i < 6; i++ )
|
||
MEM->init.hwaddr[i] = dev->dev_addr[i^1]; /* <- 16 bit swap! */
|
||
lp->memcpy_f( RIEBL_HWADDR_ADDR, dev->dev_addr, 6 );
|
||
/* set also the magic for future sessions */
|
||
*RIEBL_MAGIC_ADDR = RIEBL_MAGIC;
|
||
|
||
return( 0 );
|
||
}
|
||
|
||
|
||
#ifdef MODULE
|
||
static struct net_device *atarilance_dev;
|
||
|
||
int init_module(void)
|
||
{
|
||
atarilance_dev = atarilance_probe(-1);
|
||
if (IS_ERR(atarilance_dev))
|
||
return PTR_ERR(atarilance_dev);
|
||
return 0;
|
||
}
|
||
|
||
void cleanup_module(void)
|
||
{
|
||
unregister_netdev(atarilance_dev);
|
||
free_irq(atarilance_dev->irq, atarilance_dev);
|
||
free_netdev(atarilance_dev);
|
||
}
|
||
|
||
#endif /* MODULE */
|
||
|
||
|
||
/*
|
||
* Local variables:
|
||
* c-indent-level: 4
|
||
* tab-width: 4
|
||
* End:
|
||
*/
|