mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-25 02:09:42 +00:00
667 lines
19 KiB
C
667 lines
19 KiB
C
/* ne-h8300.c: A NE2000 clone on H8/300 driver for linux. */
|
||
/*
|
||
original ne.c
|
||
Written 1992-94 by Donald Becker.
|
||
|
||
Copyright 1993 United States Government as represented by the
|
||
Director, National Security Agency.
|
||
|
||
This software may be used and distributed according to the terms
|
||
of the GNU General Public License, incorporated herein by reference.
|
||
|
||
The author may be reached as becker@scyld.com, or C/O
|
||
Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
|
||
|
||
H8/300 modified
|
||
Yoshinori Sato <ysato@users.sourceforge.jp>
|
||
*/
|
||
|
||
static const char version1[] =
|
||
"ne-h8300.c:v1.00 2004/04/11 ysato\n";
|
||
|
||
#include <linux/module.h>
|
||
#include <linux/kernel.h>
|
||
#include <linux/errno.h>
|
||
#include <linux/init.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/netdevice.h>
|
||
#include <linux/etherdevice.h>
|
||
|
||
#include <asm/system.h>
|
||
#include <asm/io.h>
|
||
#include <asm/irq.h>
|
||
|
||
#include "8390.h"
|
||
|
||
#define DRV_NAME "ne-h8300"
|
||
|
||
/* Some defines that people can play with if so inclined. */
|
||
|
||
/* Do we perform extra sanity checks on stuff ? */
|
||
/* #define NE_SANITY_CHECK */
|
||
|
||
/* Do we implement the read before write bugfix ? */
|
||
/* #define NE_RW_BUGFIX */
|
||
|
||
/* Do we have a non std. amount of memory? (in units of 256 byte pages) */
|
||
/* #define PACKETBUF_MEMSIZE 0x40 */
|
||
|
||
/* A zero-terminated list of I/O addresses to be probed at boot. */
|
||
|
||
/* ---- No user-serviceable parts below ---- */
|
||
|
||
#define NE_BASE (dev->base_addr)
|
||
#define NE_CMD 0x00
|
||
#define NE_DATAPORT (ei_status.word16?0x20:0x10) /* NatSemi-defined port window offset. */
|
||
#define NE_RESET (ei_status.word16?0x3f:0x1f) /* Issue a read to reset, a write to clear. */
|
||
#define NE_IO_EXTENT (ei_status.word16?0x40:0x20)
|
||
|
||
#define NESM_START_PG 0x40 /* First page of TX buffer */
|
||
#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
|
||
|
||
static int ne_probe1(struct net_device *dev, int ioaddr);
|
||
|
||
static int ne_open(struct net_device *dev);
|
||
static int ne_close(struct net_device *dev);
|
||
|
||
static void ne_reset_8390(struct net_device *dev);
|
||
static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
|
||
int ring_page);
|
||
static void ne_block_input(struct net_device *dev, int count,
|
||
struct sk_buff *skb, int ring_offset);
|
||
static void ne_block_output(struct net_device *dev, const int count,
|
||
const unsigned char *buf, const int start_page);
|
||
|
||
|
||
static u32 reg_offset[16];
|
||
|
||
static int __init init_reg_offset(struct net_device *dev,unsigned long base_addr)
|
||
{
|
||
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
|
||
int i;
|
||
unsigned char bus_width;
|
||
|
||
bus_width = *(volatile unsigned char *)ABWCR;
|
||
bus_width &= 1 << ((base_addr >> 21) & 7);
|
||
|
||
for (i = 0; i < sizeof(reg_offset) / sizeof(u32); i++)
|
||
if (bus_width == 0)
|
||
reg_offset[i] = i * 2 + 1;
|
||
else
|
||
reg_offset[i] = i;
|
||
|
||
ei_local->reg_offset = reg_offset;
|
||
return 0;
|
||
}
|
||
|
||
static int __initdata h8300_ne_count = 0;
|
||
#ifdef CONFIG_H8300H_H8MAX
|
||
static unsigned long __initdata h8300_ne_base[] = { 0x800600 };
|
||
static int h8300_ne_irq[] = {EXT_IRQ4};
|
||
#endif
|
||
#ifdef CONFIG_H8300H_AKI3068NET
|
||
static unsigned long __initdata h8300_ne_base[] = { 0x200000 };
|
||
static int h8300_ne_irq[] = {EXT_IRQ5};
|
||
#endif
|
||
|
||
static inline int init_dev(struct net_device *dev)
|
||
{
|
||
if (h8300_ne_count < (sizeof(h8300_ne_base) / sizeof(unsigned long))) {
|
||
dev->base_addr = h8300_ne_base[h8300_ne_count];
|
||
dev->irq = h8300_ne_irq[h8300_ne_count];
|
||
h8300_ne_count++;
|
||
return 0;
|
||
} else
|
||
return -ENODEV;
|
||
}
|
||
|
||
/* Probe for various non-shared-memory ethercards.
|
||
|
||
NEx000-clone boards have a Station Address PROM (SAPROM) in the packet
|
||
buffer memory space. NE2000 clones have 0x57,0x57 in bytes 0x0e,0x0f of
|
||
the SAPROM, while other supposed NE2000 clones must be detected by their
|
||
SA prefix.
|
||
|
||
Reading the SAPROM from a word-wide card with the 8390 set in byte-wide
|
||
mode results in doubled values, which can be detected and compensated for.
|
||
|
||
The probe is also responsible for initializing the card and filling
|
||
in the 'dev' and 'ei_status' structures.
|
||
|
||
We use the minimum memory size for some ethercard product lines, iff we can't
|
||
distinguish models. You can increase the packet buffer size by setting
|
||
PACKETBUF_MEMSIZE. Reported Cabletron packet buffer locations are:
|
||
E1010 starts at 0x100 and ends at 0x2000.
|
||
E1010-x starts at 0x100 and ends at 0x8000. ("-x" means "more memory")
|
||
E2010 starts at 0x100 and ends at 0x4000.
|
||
E2010-x starts at 0x100 and ends at 0xffff. */
|
||
|
||
static int __init do_ne_probe(struct net_device *dev)
|
||
{
|
||
unsigned int base_addr = dev->base_addr;
|
||
|
||
SET_MODULE_OWNER(dev);
|
||
|
||
/* First check any supplied i/o locations. User knows best. <cough> */
|
||
if (base_addr > 0x1ff) /* Check a single specified location. */
|
||
return ne_probe1(dev, base_addr);
|
||
else if (base_addr != 0) /* Don't probe at all. */
|
||
return -ENXIO;
|
||
|
||
return -ENODEV;
|
||
}
|
||
|
||
static void cleanup_card(struct net_device *dev)
|
||
{
|
||
free_irq(dev->irq, dev);
|
||
release_region(dev->base_addr, NE_IO_EXTENT);
|
||
}
|
||
|
||
#ifndef MODULE
|
||
struct net_device * __init ne_probe(int unit)
|
||
{
|
||
struct net_device *dev = alloc_ei_netdev();
|
||
int err;
|
||
|
||
if (!dev)
|
||
return ERR_PTR(-ENOMEM);
|
||
|
||
if (init_dev(dev))
|
||
return ERR_PTR(-ENODEV);
|
||
|
||
sprintf(dev->name, "eth%d", unit);
|
||
netdev_boot_setup_check(dev);
|
||
|
||
err = init_reg_offset(dev, dev->base_addr);
|
||
if (err)
|
||
goto out;
|
||
|
||
err = do_ne_probe(dev);
|
||
if (err)
|
||
goto out;
|
||
return dev;
|
||
out:
|
||
free_netdev(dev);
|
||
return ERR_PTR(err);
|
||
}
|
||
#endif
|
||
|
||
static int __init ne_probe1(struct net_device *dev, int ioaddr)
|
||
{
|
||
int i;
|
||
unsigned char SA_prom[16];
|
||
int wordlength = 2;
|
||
const char *name = NULL;
|
||
int start_page, stop_page;
|
||
int reg0, ret;
|
||
static unsigned version_printed;
|
||
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
|
||
unsigned char bus_width;
|
||
|
||
if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME))
|
||
return -EBUSY;
|
||
|
||
reg0 = inb_p(ioaddr);
|
||
if (reg0 == 0xFF) {
|
||
ret = -ENODEV;
|
||
goto err_out;
|
||
}
|
||
|
||
/* Do a preliminary verification that we have a 8390. */
|
||
{
|
||
int regd;
|
||
outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
|
||
regd = inb_p(ioaddr + EI_SHIFT(0x0d));
|
||
outb_p(0xff, ioaddr + EI_SHIFT(0x0d));
|
||
outb_p(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
|
||
inb_p(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
|
||
if (inb_p(ioaddr + EN0_COUNTER0) != 0) {
|
||
outb_p(reg0, ioaddr + EI_SHIFT(0));
|
||
outb_p(regd, ioaddr + EI_SHIFT(0x0d)); /* Restore the old values. */
|
||
ret = -ENODEV;
|
||
goto err_out;
|
||
}
|
||
}
|
||
|
||
if (ei_debug && version_printed++ == 0)
|
||
printk(KERN_INFO "%s", version1);
|
||
|
||
printk(KERN_INFO "NE*000 ethercard probe at %08x:", ioaddr);
|
||
|
||
/* Read the 16 bytes of station address PROM.
|
||
We must first initialize registers, similar to NS8390_init(eifdev, 0).
|
||
We can't reliably read the SAPROM address without this.
|
||
(I learned the hard way!). */
|
||
{
|
||
struct {unsigned char value, offset; } program_seq[] =
|
||
{
|
||
{E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/
|
||
{0x48, EN0_DCFG}, /* Set byte-wide (0x48) access. */
|
||
{0x00, EN0_RCNTLO}, /* Clear the count regs. */
|
||
{0x00, EN0_RCNTHI},
|
||
{0x00, EN0_IMR}, /* Mask completion irq. */
|
||
{0xFF, EN0_ISR},
|
||
{E8390_RXOFF, EN0_RXCR}, /* 0x20 Set to monitor */
|
||
{E8390_TXOFF, EN0_TXCR}, /* 0x02 and loopback mode. */
|
||
{32, EN0_RCNTLO},
|
||
{0x00, EN0_RCNTHI},
|
||
{0x00, EN0_RSARLO}, /* DMA starting at 0x0000. */
|
||
{0x00, EN0_RSARHI},
|
||
{E8390_RREAD+E8390_START, E8390_CMD},
|
||
};
|
||
|
||
for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)
|
||
outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);
|
||
|
||
}
|
||
bus_width = *(volatile unsigned char *)ABWCR;
|
||
bus_width &= 1 << ((ioaddr >> 21) & 7);
|
||
ei_status.word16 = (bus_width == 0); /* temporary setting */
|
||
for(i = 0; i < 16 /*sizeof(SA_prom)*/; i++) {
|
||
SA_prom[i] = inb_p(ioaddr + NE_DATAPORT);
|
||
inb_p(ioaddr + NE_DATAPORT); /* dummy read */
|
||
}
|
||
|
||
start_page = NESM_START_PG;
|
||
stop_page = NESM_STOP_PG;
|
||
|
||
if (bus_width)
|
||
wordlength = 1;
|
||
else
|
||
outb_p(0x49, ioaddr + EN0_DCFG);
|
||
|
||
/* Set up the rest of the parameters. */
|
||
name = (wordlength == 2) ? "NE2000" : "NE1000";
|
||
|
||
if (! dev->irq) {
|
||
printk(" failed to detect IRQ line.\n");
|
||
ret = -EAGAIN;
|
||
goto err_out;
|
||
}
|
||
|
||
/* Snarf the interrupt now. There's no point in waiting since we cannot
|
||
share and the board will usually be enabled. */
|
||
ret = request_irq(dev->irq, ei_interrupt, 0, name, dev);
|
||
if (ret) {
|
||
printk (" unable to get IRQ %d (errno=%d).\n", dev->irq, ret);
|
||
goto err_out;
|
||
}
|
||
|
||
dev->base_addr = ioaddr;
|
||
|
||
for(i = 0; i < ETHER_ADDR_LEN; i++) {
|
||
printk(" %2.2x", SA_prom[i]);
|
||
dev->dev_addr[i] = SA_prom[i];
|
||
}
|
||
|
||
printk("\n%s: %s found at %#x, using IRQ %d.\n",
|
||
dev->name, name, ioaddr, dev->irq);
|
||
|
||
ei_status.name = name;
|
||
ei_status.tx_start_page = start_page;
|
||
ei_status.stop_page = stop_page;
|
||
ei_status.word16 = (wordlength == 2);
|
||
|
||
ei_status.rx_start_page = start_page + TX_PAGES;
|
||
#ifdef PACKETBUF_MEMSIZE
|
||
/* Allow the packet buffer size to be overridden by know-it-alls. */
|
||
ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
|
||
#endif
|
||
|
||
ei_status.reset_8390 = &ne_reset_8390;
|
||
ei_status.block_input = &ne_block_input;
|
||
ei_status.block_output = &ne_block_output;
|
||
ei_status.get_8390_hdr = &ne_get_8390_hdr;
|
||
ei_status.priv = 0;
|
||
dev->open = &ne_open;
|
||
dev->stop = &ne_close;
|
||
#ifdef CONFIG_NET_POLL_CONTROLLER
|
||
dev->poll_controller = ei_poll;
|
||
#endif
|
||
NS8390_init(dev, 0);
|
||
|
||
ret = register_netdev(dev);
|
||
if (ret)
|
||
goto out_irq;
|
||
return 0;
|
||
out_irq:
|
||
free_irq(dev->irq, dev);
|
||
err_out:
|
||
release_region(ioaddr, NE_IO_EXTENT);
|
||
return ret;
|
||
}
|
||
|
||
static int ne_open(struct net_device *dev)
|
||
{
|
||
ei_open(dev);
|
||
return 0;
|
||
}
|
||
|
||
static int ne_close(struct net_device *dev)
|
||
{
|
||
if (ei_debug > 1)
|
||
printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name);
|
||
ei_close(dev);
|
||
return 0;
|
||
}
|
||
|
||
/* Hard reset the card. This used to pause for the same period that a
|
||
8390 reset command required, but that shouldn't be necessary. */
|
||
|
||
static void ne_reset_8390(struct net_device *dev)
|
||
{
|
||
unsigned long reset_start_time = jiffies;
|
||
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
|
||
|
||
if (ei_debug > 1)
|
||
printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies);
|
||
|
||
/* DON'T change these to inb_p/outb_p or reset will fail on clones. */
|
||
outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
|
||
|
||
ei_status.txing = 0;
|
||
ei_status.dmaing = 0;
|
||
|
||
/* This check _should_not_ be necessary, omit eventually. */
|
||
while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)
|
||
if (jiffies - reset_start_time > 2*HZ/100) {
|
||
printk(KERN_WARNING "%s: ne_reset_8390() did not complete.\n", dev->name);
|
||
break;
|
||
}
|
||
outb_p(ENISR_RESET, NE_BASE + EN0_ISR); /* Ack intr. */
|
||
}
|
||
|
||
/* Grab the 8390 specific header. Similar to the block_input routine, but
|
||
we don't need to be concerned with ring wrap as the header will be at
|
||
the start of a page, so we optimize accordingly. */
|
||
|
||
static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
|
||
{
|
||
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
|
||
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
|
||
|
||
if (ei_status.dmaing)
|
||
{
|
||
printk(KERN_EMERG "%s: DMAing conflict in ne_get_8390_hdr "
|
||
"[DMAstat:%d][irqlock:%d].\n",
|
||
dev->name, ei_status.dmaing, ei_status.irqlock);
|
||
return;
|
||
}
|
||
|
||
ei_status.dmaing |= 0x01;
|
||
outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, NE_BASE + NE_CMD);
|
||
outb_p(sizeof(struct e8390_pkt_hdr), NE_BASE + EN0_RCNTLO);
|
||
outb_p(0, NE_BASE + EN0_RCNTHI);
|
||
outb_p(0, NE_BASE + EN0_RSARLO); /* On page boundary */
|
||
outb_p(ring_page, NE_BASE + EN0_RSARHI);
|
||
outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD);
|
||
|
||
if (ei_status.word16) {
|
||
int len;
|
||
unsigned short *p = (unsigned short *)hdr;
|
||
for (len = sizeof(struct e8390_pkt_hdr)>>1; len > 0; len--)
|
||
*p++ = inw(NE_BASE + NE_DATAPORT);
|
||
} else
|
||
insb(NE_BASE + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
|
||
|
||
outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */
|
||
ei_status.dmaing &= ~0x01;
|
||
|
||
le16_to_cpus(&hdr->count);
|
||
}
|
||
|
||
/* Block input and output, similar to the Crynwr packet driver. If you
|
||
are porting to a new ethercard, look at the packet driver source for hints.
|
||
The NEx000 doesn't share the on-board packet memory -- you have to put
|
||
the packet out through the "remote DMA" dataport using outb. */
|
||
|
||
static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
|
||
{
|
||
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
|
||
#ifdef NE_SANITY_CHECK
|
||
int xfer_count = count;
|
||
#endif
|
||
char *buf = skb->data;
|
||
|
||
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
|
||
if (ei_status.dmaing)
|
||
{
|
||
printk(KERN_EMERG "%s: DMAing conflict in ne_block_input "
|
||
"[DMAstat:%d][irqlock:%d].\n",
|
||
dev->name, ei_status.dmaing, ei_status.irqlock);
|
||
return;
|
||
}
|
||
ei_status.dmaing |= 0x01;
|
||
outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, NE_BASE + NE_CMD);
|
||
outb_p(count & 0xff, NE_BASE + EN0_RCNTLO);
|
||
outb_p(count >> 8, NE_BASE + EN0_RCNTHI);
|
||
outb_p(ring_offset & 0xff, NE_BASE + EN0_RSARLO);
|
||
outb_p(ring_offset >> 8, NE_BASE + EN0_RSARHI);
|
||
outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD);
|
||
if (ei_status.word16)
|
||
{
|
||
int len;
|
||
unsigned short *p = (unsigned short *)buf;
|
||
for (len = count>>1; len > 0; len--)
|
||
*p++ = inw(NE_BASE + NE_DATAPORT);
|
||
if (count & 0x01)
|
||
{
|
||
buf[count-1] = inb(NE_BASE + NE_DATAPORT);
|
||
#ifdef NE_SANITY_CHECK
|
||
xfer_count++;
|
||
#endif
|
||
}
|
||
} else {
|
||
insb(NE_BASE + NE_DATAPORT, buf, count);
|
||
}
|
||
|
||
#ifdef NE_SANITY_CHECK
|
||
/* This was for the ALPHA version only, but enough people have
|
||
been encountering problems so it is still here. If you see
|
||
this message you either 1) have a slightly incompatible clone
|
||
or 2) have noise/speed problems with your bus. */
|
||
|
||
if (ei_debug > 1)
|
||
{
|
||
/* DMA termination address check... */
|
||
int addr, tries = 20;
|
||
do {
|
||
/* DON'T check for 'inb_p(EN0_ISR) & ENISR_RDC' here
|
||
-- it's broken for Rx on some cards! */
|
||
int high = inb_p(NE_BASE + EN0_RSARHI);
|
||
int low = inb_p(NE_BASE + EN0_RSARLO);
|
||
addr = (high << 8) + low;
|
||
if (((ring_offset + xfer_count) & 0xff) == low)
|
||
break;
|
||
} while (--tries > 0);
|
||
if (tries <= 0)
|
||
printk(KERN_WARNING "%s: RX transfer address mismatch,"
|
||
"%#4.4x (expected) vs. %#4.4x (actual).\n",
|
||
dev->name, ring_offset + xfer_count, addr);
|
||
}
|
||
#endif
|
||
outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */
|
||
ei_status.dmaing &= ~0x01;
|
||
}
|
||
|
||
static void ne_block_output(struct net_device *dev, int count,
|
||
const unsigned char *buf, const int start_page)
|
||
{
|
||
struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
|
||
unsigned long dma_start;
|
||
#ifdef NE_SANITY_CHECK
|
||
int retries = 0;
|
||
#endif
|
||
|
||
/* Round the count up for word writes. Do we need to do this?
|
||
What effect will an odd byte count have on the 8390?
|
||
I should check someday. */
|
||
|
||
if (ei_status.word16 && (count & 0x01))
|
||
count++;
|
||
|
||
/* This *shouldn't* happen. If it does, it's the last thing you'll see */
|
||
if (ei_status.dmaing)
|
||
{
|
||
printk(KERN_EMERG "%s: DMAing conflict in ne_block_output."
|
||
"[DMAstat:%d][irqlock:%d]\n",
|
||
dev->name, ei_status.dmaing, ei_status.irqlock);
|
||
return;
|
||
}
|
||
ei_status.dmaing |= 0x01;
|
||
/* We should already be in page 0, but to be safe... */
|
||
outb_p(E8390_PAGE0+E8390_START+E8390_NODMA, NE_BASE + NE_CMD);
|
||
|
||
#ifdef NE_SANITY_CHECK
|
||
retry:
|
||
#endif
|
||
|
||
#ifdef NE8390_RW_BUGFIX
|
||
/* Handle the read-before-write bug the same way as the
|
||
Crynwr packet driver -- the NatSemi method doesn't work.
|
||
Actually this doesn't always work either, but if you have
|
||
problems with your NEx000 this is better than nothing! */
|
||
|
||
outb_p(0x42, NE_BASE + EN0_RCNTLO);
|
||
outb_p(0x00, NE_BASE + EN0_RCNTHI);
|
||
outb_p(0x42, NE_BASE + EN0_RSARLO);
|
||
outb_p(0x00, NE_BASE + EN0_RSARHI);
|
||
outb_p(E8390_RREAD+E8390_START, NE_BASE + NE_CMD);
|
||
/* Make certain that the dummy read has occurred. */
|
||
udelay(6);
|
||
#endif
|
||
|
||
outb_p(ENISR_RDC, NE_BASE + EN0_ISR);
|
||
|
||
/* Now the normal output. */
|
||
outb_p(count & 0xff, NE_BASE + EN0_RCNTLO);
|
||
outb_p(count >> 8, NE_BASE + EN0_RCNTHI);
|
||
outb_p(0x00, NE_BASE + EN0_RSARLO);
|
||
outb_p(start_page, NE_BASE + EN0_RSARHI);
|
||
|
||
outb_p(E8390_RWRITE+E8390_START, NE_BASE + NE_CMD);
|
||
if (ei_status.word16) {
|
||
int len;
|
||
unsigned short *p = (unsigned short *)buf;
|
||
for (len = count>>1; len > 0; len--)
|
||
outw(*p++, NE_BASE + NE_DATAPORT);
|
||
} else {
|
||
outsb(NE_BASE + NE_DATAPORT, buf, count);
|
||
}
|
||
|
||
dma_start = jiffies;
|
||
|
||
#ifdef NE_SANITY_CHECK
|
||
/* This was for the ALPHA version only, but enough people have
|
||
been encountering problems so it is still here. */
|
||
|
||
if (ei_debug > 1)
|
||
{
|
||
/* DMA termination address check... */
|
||
int addr, tries = 20;
|
||
do {
|
||
int high = inb_p(NE_BASE + EN0_RSARHI);
|
||
int low = inb_p(NE_BASE + EN0_RSARLO);
|
||
addr = (high << 8) + low;
|
||
if ((start_page << 8) + count == addr)
|
||
break;
|
||
} while (--tries > 0);
|
||
|
||
if (tries <= 0)
|
||
{
|
||
printk(KERN_WARNING "%s: Tx packet transfer address mismatch,"
|
||
"%#4.4x (expected) vs. %#4.4x (actual).\n",
|
||
dev->name, (start_page << 8) + count, addr);
|
||
if (retries++ == 0)
|
||
goto retry;
|
||
}
|
||
}
|
||
#endif
|
||
|
||
while ((inb_p(NE_BASE + EN0_ISR) & ENISR_RDC) == 0)
|
||
if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
|
||
printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
|
||
ne_reset_8390(dev);
|
||
NS8390_init(dev,1);
|
||
break;
|
||
}
|
||
|
||
outb_p(ENISR_RDC, NE_BASE + EN0_ISR); /* Ack intr. */
|
||
ei_status.dmaing &= ~0x01;
|
||
return;
|
||
}
|
||
|
||
|
||
#ifdef MODULE
|
||
#define MAX_NE_CARDS 1 /* Max number of NE cards per module */
|
||
static struct net_device *dev_ne[MAX_NE_CARDS];
|
||
static int io[MAX_NE_CARDS];
|
||
static int irq[MAX_NE_CARDS];
|
||
static int bad[MAX_NE_CARDS]; /* 0xbad = bad sig or no reset ack */
|
||
|
||
MODULE_PARM(io, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
|
||
MODULE_PARM(irq, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
|
||
MODULE_PARM(bad, "1-" __MODULE_STRING(MAX_NE_CARDS) "i");
|
||
MODULE_PARM_DESC(io, "I/O base address(es)");
|
||
MODULE_PARM_DESC(irq, "IRQ number(s)");
|
||
MODULE_DESCRIPTION("H8/300 NE2000 Ethernet driver");
|
||
MODULE_LICENSE("GPL");
|
||
|
||
/* This is set up so that no ISA autoprobe takes place. We can't guarantee
|
||
that the ne2k probe is the last 8390 based probe to take place (as it
|
||
is at boot) and so the probe will get confused by any other 8390 cards.
|
||
ISA device autoprobes on a running machine are not recommended anyway. */
|
||
|
||
int init_module(void)
|
||
{
|
||
int this_dev, found = 0;
|
||
int err;
|
||
|
||
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
|
||
struct net_device *dev = alloc_ei_netdev();
|
||
if (!dev)
|
||
break;
|
||
if (io[this_dev]) {
|
||
dev->irq = irq[this_dev];
|
||
dev->mem_end = bad[this_dev];
|
||
dev->base_addr = io[this_dev];
|
||
} else {
|
||
dev->base_addr = h8300_ne_base[this_dev];
|
||
dev->irq = h8300_ne_irq[this_dev];
|
||
}
|
||
err = init_reg_offset(dev, dev->base_addr);
|
||
if (!err) {
|
||
if (do_ne_probe(dev) == 0) {
|
||
dev_ne[found++] = dev;
|
||
continue;
|
||
}
|
||
}
|
||
free_netdev(dev);
|
||
if (found)
|
||
break;
|
||
if (io[this_dev] != 0)
|
||
printk(KERN_WARNING "ne.c: No NE*000 card found at i/o = %#x\n", dev->base_addr);
|
||
else
|
||
printk(KERN_NOTICE "ne.c: You must supply \"io=0xNNN\" value(s) for ISA cards.\n");
|
||
return -ENXIO;
|
||
}
|
||
if (found)
|
||
return 0;
|
||
return -ENODEV;
|
||
}
|
||
|
||
void cleanup_module(void)
|
||
{
|
||
int this_dev;
|
||
|
||
for (this_dev = 0; this_dev < MAX_NE_CARDS; this_dev++) {
|
||
struct net_device *dev = dev_ne[this_dev];
|
||
if (dev) {
|
||
unregister_netdev(dev);
|
||
cleanup_card(dev);
|
||
free_netdev(dev);
|
||
}
|
||
}
|
||
}
|
||
#endif /* MODULE */
|