mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
![Benjamin Herrenschmidt](/assets/img/avatar_default.png)
Grant patches added an of mach table to struct device_driver. However, while he changed the macio device code to use that, he left the match table pointer in struct macio_driver and didn't update drivers to use the "new" one, thus breaking the probing. This completes the change by moving all drivers to setup the "new" one, removing all traces of the old one, and while at it (since it changes the exact same locations), I also remove two other duplicates from struct driver which are the name and owner fields. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
1429 lines
40 KiB
C
1429 lines
40 KiB
C
/*
|
|
* Libata based driver for Apple "macio" family of PATA controllers
|
|
*
|
|
* Copyright 2008/2009 Benjamin Herrenschmidt, IBM Corp
|
|
* <benh@kernel.crashing.org>
|
|
*
|
|
* Some bits and pieces from drivers/ide/ppc/pmac.c
|
|
*
|
|
*/
|
|
|
|
#undef DEBUG
|
|
#undef DEBUG_DMA
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/ata.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/adb.h>
|
|
#include <linux/pmu.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/of.h>
|
|
#include <linux/gfp.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_device.h>
|
|
|
|
#include <asm/macio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dbdma.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/pmac_feature.h>
|
|
#include <asm/mediabay.h>
|
|
|
|
#ifdef DEBUG_DMA
|
|
#define dev_dbgdma(dev, format, arg...) \
|
|
dev_printk(KERN_DEBUG , dev , format , ## arg)
|
|
#else
|
|
#define dev_dbgdma(dev, format, arg...) \
|
|
({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; })
|
|
#endif
|
|
|
|
#define DRV_NAME "pata_macio"
|
|
#define DRV_VERSION "0.9"
|
|
|
|
/* Models of macio ATA controller */
|
|
enum {
|
|
controller_ohare, /* OHare based */
|
|
controller_heathrow, /* Heathrow/Paddington */
|
|
controller_kl_ata3, /* KeyLargo ATA-3 */
|
|
controller_kl_ata4, /* KeyLargo ATA-4 */
|
|
controller_un_ata6, /* UniNorth2 ATA-6 */
|
|
controller_k2_ata6, /* K2 ATA-6 */
|
|
controller_sh_ata6, /* Shasta ATA-6 */
|
|
};
|
|
|
|
static const char* macio_ata_names[] = {
|
|
"OHare ATA", /* OHare based */
|
|
"Heathrow ATA", /* Heathrow/Paddington */
|
|
"KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */
|
|
"KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */
|
|
"UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */
|
|
"K2 ATA-6", /* K2 ATA-6 (UDMA/100) */
|
|
"Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */
|
|
};
|
|
|
|
/*
|
|
* Extra registers, both 32-bit little-endian
|
|
*/
|
|
#define IDE_TIMING_CONFIG 0x200
|
|
#define IDE_INTERRUPT 0x300
|
|
|
|
/* Kauai (U2) ATA has different register setup */
|
|
#define IDE_KAUAI_PIO_CONFIG 0x200
|
|
#define IDE_KAUAI_ULTRA_CONFIG 0x210
|
|
#define IDE_KAUAI_POLL_CONFIG 0x220
|
|
|
|
/*
|
|
* Timing configuration register definitions
|
|
*/
|
|
|
|
/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
|
|
#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
|
|
#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS)
|
|
#define IDE_SYSCLK_NS 30 /* 33Mhz cell */
|
|
#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */
|
|
|
|
/* 133Mhz cell, found in shasta.
|
|
* See comments about 100 Mhz Uninorth 2...
|
|
* Note that PIO_MASK and MDMA_MASK seem to overlap, that's just
|
|
* weird and I don't now why .. at this stage
|
|
*/
|
|
#define TR_133_PIOREG_PIO_MASK 0xff000fff
|
|
#define TR_133_PIOREG_MDMA_MASK 0x00fff800
|
|
#define TR_133_UDMAREG_UDMA_MASK 0x0003ffff
|
|
#define TR_133_UDMAREG_UDMA_EN 0x00000001
|
|
|
|
/* 100Mhz cell, found in Uninorth 2 and K2. It appears as a pci device
|
|
* (106b/0033) on uninorth or K2 internal PCI bus and it's clock is
|
|
* controlled like gem or fw. It appears to be an evolution of keylargo
|
|
* ATA4 with a timing register extended to 2x32bits registers (one
|
|
* for PIO & MWDMA and one for UDMA, and a similar DBDMA channel.
|
|
* It has it's own local feature control register as well.
|
|
*
|
|
* After scratching my mind over the timing values, at least for PIO
|
|
* and MDMA, I think I've figured the format of the timing register,
|
|
* though I use pre-calculated tables for UDMA as usual...
|
|
*/
|
|
#define TR_100_PIO_ADDRSETUP_MASK 0xff000000 /* Size of field unknown */
|
|
#define TR_100_PIO_ADDRSETUP_SHIFT 24
|
|
#define TR_100_MDMA_MASK 0x00fff000
|
|
#define TR_100_MDMA_RECOVERY_MASK 0x00fc0000
|
|
#define TR_100_MDMA_RECOVERY_SHIFT 18
|
|
#define TR_100_MDMA_ACCESS_MASK 0x0003f000
|
|
#define TR_100_MDMA_ACCESS_SHIFT 12
|
|
#define TR_100_PIO_MASK 0xff000fff
|
|
#define TR_100_PIO_RECOVERY_MASK 0x00000fc0
|
|
#define TR_100_PIO_RECOVERY_SHIFT 6
|
|
#define TR_100_PIO_ACCESS_MASK 0x0000003f
|
|
#define TR_100_PIO_ACCESS_SHIFT 0
|
|
|
|
#define TR_100_UDMAREG_UDMA_MASK 0x0000ffff
|
|
#define TR_100_UDMAREG_UDMA_EN 0x00000001
|
|
|
|
|
|
/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on
|
|
* 40 connector cable and to 4 on 80 connector one.
|
|
* Clock unit is 15ns (66Mhz)
|
|
*
|
|
* 3 Values can be programmed:
|
|
* - Write data setup, which appears to match the cycle time. They
|
|
* also call it DIOW setup.
|
|
* - Ready to pause time (from spec)
|
|
* - Address setup. That one is weird. I don't see where exactly
|
|
* it fits in UDMA cycles, I got it's name from an obscure piece
|
|
* of commented out code in Darwin. They leave it to 0, we do as
|
|
* well, despite a comment that would lead to think it has a
|
|
* min value of 45ns.
|
|
* Apple also add 60ns to the write data setup (or cycle time ?) on
|
|
* reads.
|
|
*/
|
|
#define TR_66_UDMA_MASK 0xfff00000
|
|
#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */
|
|
#define TR_66_PIO_ADDRSETUP_MASK 0xe0000000 /* Address setup */
|
|
#define TR_66_PIO_ADDRSETUP_SHIFT 29
|
|
#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */
|
|
#define TR_66_UDMA_RDY2PAUS_SHIFT 25
|
|
#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */
|
|
#define TR_66_UDMA_WRDATASETUP_SHIFT 21
|
|
#define TR_66_MDMA_MASK 0x000ffc00
|
|
#define TR_66_MDMA_RECOVERY_MASK 0x000f8000
|
|
#define TR_66_MDMA_RECOVERY_SHIFT 15
|
|
#define TR_66_MDMA_ACCESS_MASK 0x00007c00
|
|
#define TR_66_MDMA_ACCESS_SHIFT 10
|
|
#define TR_66_PIO_MASK 0xe00003ff
|
|
#define TR_66_PIO_RECOVERY_MASK 0x000003e0
|
|
#define TR_66_PIO_RECOVERY_SHIFT 5
|
|
#define TR_66_PIO_ACCESS_MASK 0x0000001f
|
|
#define TR_66_PIO_ACCESS_SHIFT 0
|
|
|
|
/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo
|
|
* Can do pio & mdma modes, clock unit is 30ns (33Mhz)
|
|
*
|
|
* The access time and recovery time can be programmed. Some older
|
|
* Darwin code base limit OHare to 150ns cycle time. I decided to do
|
|
* the same here fore safety against broken old hardware ;)
|
|
* The HalfTick bit, when set, adds half a clock (15ns) to the access
|
|
* time and removes one from recovery. It's not supported on KeyLargo
|
|
* implementation afaik. The E bit appears to be set for PIO mode 0 and
|
|
* is used to reach long timings used in this mode.
|
|
*/
|
|
#define TR_33_MDMA_MASK 0x003ff800
|
|
#define TR_33_MDMA_RECOVERY_MASK 0x001f0000
|
|
#define TR_33_MDMA_RECOVERY_SHIFT 16
|
|
#define TR_33_MDMA_ACCESS_MASK 0x0000f800
|
|
#define TR_33_MDMA_ACCESS_SHIFT 11
|
|
#define TR_33_MDMA_HALFTICK 0x00200000
|
|
#define TR_33_PIO_MASK 0x000007ff
|
|
#define TR_33_PIO_E 0x00000400
|
|
#define TR_33_PIO_RECOVERY_MASK 0x000003e0
|
|
#define TR_33_PIO_RECOVERY_SHIFT 5
|
|
#define TR_33_PIO_ACCESS_MASK 0x0000001f
|
|
#define TR_33_PIO_ACCESS_SHIFT 0
|
|
|
|
/*
|
|
* Interrupt register definitions. Only present on newer cells
|
|
* (Keylargo and later afaik) so we don't use it.
|
|
*/
|
|
#define IDE_INTR_DMA 0x80000000
|
|
#define IDE_INTR_DEVICE 0x40000000
|
|
|
|
/*
|
|
* FCR Register on Kauai. Not sure what bit 0x4 is ...
|
|
*/
|
|
#define KAUAI_FCR_UATA_MAGIC 0x00000004
|
|
#define KAUAI_FCR_UATA_RESET_N 0x00000002
|
|
#define KAUAI_FCR_UATA_ENABLE 0x00000001
|
|
|
|
|
|
/* Allow up to 256 DBDMA commands per xfer */
|
|
#define MAX_DCMDS 256
|
|
|
|
/* Don't let a DMA segment go all the way to 64K */
|
|
#define MAX_DBDMA_SEG 0xff00
|
|
|
|
|
|
/*
|
|
* Wait 1s for disk to answer on IDE bus after a hard reset
|
|
* of the device (via GPIO/FCR).
|
|
*
|
|
* Some devices seem to "pollute" the bus even after dropping
|
|
* the BSY bit (typically some combo drives slave on the UDMA
|
|
* bus) after a hard reset. Since we hard reset all drives on
|
|
* KeyLargo ATA66, we have to keep that delay around. I may end
|
|
* up not hard resetting anymore on these and keep the delay only
|
|
* for older interfaces instead (we have to reset when coming
|
|
* from MacOS...) --BenH.
|
|
*/
|
|
#define IDE_WAKEUP_DELAY_MS 1000
|
|
|
|
struct pata_macio_timing;
|
|
|
|
struct pata_macio_priv {
|
|
int kind;
|
|
int aapl_bus_id;
|
|
int mediabay : 1;
|
|
struct device_node *node;
|
|
struct macio_dev *mdev;
|
|
struct pci_dev *pdev;
|
|
struct device *dev;
|
|
int irq;
|
|
u32 treg[2][2];
|
|
void __iomem *tfregs;
|
|
void __iomem *kauai_fcr;
|
|
struct dbdma_cmd * dma_table_cpu;
|
|
dma_addr_t dma_table_dma;
|
|
struct ata_host *host;
|
|
const struct pata_macio_timing *timings;
|
|
};
|
|
|
|
/* Previous variants of this driver used to calculate timings
|
|
* for various variants of the chip and use tables for others.
|
|
*
|
|
* Not only was this confusing, but in addition, it isn't clear
|
|
* whether our calculation code was correct. It didn't entirely
|
|
* match the darwin code and whatever documentation I could find
|
|
* on these cells
|
|
*
|
|
* I decided to entirely rely on a table instead for this version
|
|
* of the driver. Also, because I don't really care about derated
|
|
* modes and really old HW other than making it work, I'm not going
|
|
* to calculate / snoop timing values for something else than the
|
|
* standard modes.
|
|
*/
|
|
struct pata_macio_timing {
|
|
int mode;
|
|
u32 reg1; /* Bits to set in first timing reg */
|
|
u32 reg2; /* Bits to set in second timing reg */
|
|
};
|
|
|
|
static const struct pata_macio_timing pata_macio_ohare_timings[] = {
|
|
{ XFER_PIO_0, 0x00000526, 0, },
|
|
{ XFER_PIO_1, 0x00000085, 0, },
|
|
{ XFER_PIO_2, 0x00000025, 0, },
|
|
{ XFER_PIO_3, 0x00000025, 0, },
|
|
{ XFER_PIO_4, 0x00000025, 0, },
|
|
{ XFER_MW_DMA_0, 0x00074000, 0, },
|
|
{ XFER_MW_DMA_1, 0x00221000, 0, },
|
|
{ XFER_MW_DMA_2, 0x00211000, 0, },
|
|
{ -1, 0, 0 }
|
|
};
|
|
|
|
static const struct pata_macio_timing pata_macio_heathrow_timings[] = {
|
|
{ XFER_PIO_0, 0x00000526, 0, },
|
|
{ XFER_PIO_1, 0x00000085, 0, },
|
|
{ XFER_PIO_2, 0x00000025, 0, },
|
|
{ XFER_PIO_3, 0x00000025, 0, },
|
|
{ XFER_PIO_4, 0x00000025, 0, },
|
|
{ XFER_MW_DMA_0, 0x00074000, 0, },
|
|
{ XFER_MW_DMA_1, 0x00221000, 0, },
|
|
{ XFER_MW_DMA_2, 0x00211000, 0, },
|
|
{ -1, 0, 0 }
|
|
};
|
|
|
|
static const struct pata_macio_timing pata_macio_kl33_timings[] = {
|
|
{ XFER_PIO_0, 0x00000526, 0, },
|
|
{ XFER_PIO_1, 0x00000085, 0, },
|
|
{ XFER_PIO_2, 0x00000025, 0, },
|
|
{ XFER_PIO_3, 0x00000025, 0, },
|
|
{ XFER_PIO_4, 0x00000025, 0, },
|
|
{ XFER_MW_DMA_0, 0x00084000, 0, },
|
|
{ XFER_MW_DMA_1, 0x00021800, 0, },
|
|
{ XFER_MW_DMA_2, 0x00011800, 0, },
|
|
{ -1, 0, 0 }
|
|
};
|
|
|
|
static const struct pata_macio_timing pata_macio_kl66_timings[] = {
|
|
{ XFER_PIO_0, 0x0000038c, 0, },
|
|
{ XFER_PIO_1, 0x0000020a, 0, },
|
|
{ XFER_PIO_2, 0x00000127, 0, },
|
|
{ XFER_PIO_3, 0x000000c6, 0, },
|
|
{ XFER_PIO_4, 0x00000065, 0, },
|
|
{ XFER_MW_DMA_0, 0x00084000, 0, },
|
|
{ XFER_MW_DMA_1, 0x00029800, 0, },
|
|
{ XFER_MW_DMA_2, 0x00019400, 0, },
|
|
{ XFER_UDMA_0, 0x19100000, 0, },
|
|
{ XFER_UDMA_1, 0x14d00000, 0, },
|
|
{ XFER_UDMA_2, 0x10900000, 0, },
|
|
{ XFER_UDMA_3, 0x0c700000, 0, },
|
|
{ XFER_UDMA_4, 0x0c500000, 0, },
|
|
{ -1, 0, 0 }
|
|
};
|
|
|
|
static const struct pata_macio_timing pata_macio_kauai_timings[] = {
|
|
{ XFER_PIO_0, 0x08000a92, 0, },
|
|
{ XFER_PIO_1, 0x0800060f, 0, },
|
|
{ XFER_PIO_2, 0x0800038b, 0, },
|
|
{ XFER_PIO_3, 0x05000249, 0, },
|
|
{ XFER_PIO_4, 0x04000148, 0, },
|
|
{ XFER_MW_DMA_0, 0x00618000, 0, },
|
|
{ XFER_MW_DMA_1, 0x00209000, 0, },
|
|
{ XFER_MW_DMA_2, 0x00148000, 0, },
|
|
{ XFER_UDMA_0, 0, 0x000070c1, },
|
|
{ XFER_UDMA_1, 0, 0x00005d81, },
|
|
{ XFER_UDMA_2, 0, 0x00004a61, },
|
|
{ XFER_UDMA_3, 0, 0x00003a51, },
|
|
{ XFER_UDMA_4, 0, 0x00002a31, },
|
|
{ XFER_UDMA_5, 0, 0x00002921, },
|
|
{ -1, 0, 0 }
|
|
};
|
|
|
|
static const struct pata_macio_timing pata_macio_shasta_timings[] = {
|
|
{ XFER_PIO_0, 0x0a000c97, 0, },
|
|
{ XFER_PIO_1, 0x07000712, 0, },
|
|
{ XFER_PIO_2, 0x040003cd, 0, },
|
|
{ XFER_PIO_3, 0x0500028b, 0, },
|
|
{ XFER_PIO_4, 0x0400010a, 0, },
|
|
{ XFER_MW_DMA_0, 0x00820800, 0, },
|
|
{ XFER_MW_DMA_1, 0x0028b000, 0, },
|
|
{ XFER_MW_DMA_2, 0x001ca000, 0, },
|
|
{ XFER_UDMA_0, 0, 0x00035901, },
|
|
{ XFER_UDMA_1, 0, 0x000348b1, },
|
|
{ XFER_UDMA_2, 0, 0x00033881, },
|
|
{ XFER_UDMA_3, 0, 0x00033861, },
|
|
{ XFER_UDMA_4, 0, 0x00033841, },
|
|
{ XFER_UDMA_5, 0, 0x00033031, },
|
|
{ XFER_UDMA_6, 0, 0x00033021, },
|
|
{ -1, 0, 0 }
|
|
};
|
|
|
|
static const struct pata_macio_timing *pata_macio_find_timing(
|
|
struct pata_macio_priv *priv,
|
|
int mode)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; priv->timings[i].mode > 0; i++) {
|
|
if (priv->timings[i].mode == mode)
|
|
return &priv->timings[i];
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
|
|
static void pata_macio_apply_timings(struct ata_port *ap, unsigned int device)
|
|
{
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
void __iomem *rbase = ap->ioaddr.cmd_addr;
|
|
|
|
if (priv->kind == controller_sh_ata6 ||
|
|
priv->kind == controller_un_ata6 ||
|
|
priv->kind == controller_k2_ata6) {
|
|
writel(priv->treg[device][0], rbase + IDE_KAUAI_PIO_CONFIG);
|
|
writel(priv->treg[device][1], rbase + IDE_KAUAI_ULTRA_CONFIG);
|
|
} else
|
|
writel(priv->treg[device][0], rbase + IDE_TIMING_CONFIG);
|
|
}
|
|
|
|
static void pata_macio_dev_select(struct ata_port *ap, unsigned int device)
|
|
{
|
|
ata_sff_dev_select(ap, device);
|
|
|
|
/* Apply timings */
|
|
pata_macio_apply_timings(ap, device);
|
|
}
|
|
|
|
static void pata_macio_set_timings(struct ata_port *ap,
|
|
struct ata_device *adev)
|
|
{
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
const struct pata_macio_timing *t;
|
|
|
|
dev_dbg(priv->dev, "Set timings: DEV=%d,PIO=0x%x (%s),DMA=0x%x (%s)\n",
|
|
adev->devno,
|
|
adev->pio_mode,
|
|
ata_mode_string(ata_xfer_mode2mask(adev->pio_mode)),
|
|
adev->dma_mode,
|
|
ata_mode_string(ata_xfer_mode2mask(adev->dma_mode)));
|
|
|
|
/* First clear timings */
|
|
priv->treg[adev->devno][0] = priv->treg[adev->devno][1] = 0;
|
|
|
|
/* Now get the PIO timings */
|
|
t = pata_macio_find_timing(priv, adev->pio_mode);
|
|
if (t == NULL) {
|
|
dev_warn(priv->dev, "Invalid PIO timing requested: 0x%x\n",
|
|
adev->pio_mode);
|
|
t = pata_macio_find_timing(priv, XFER_PIO_0);
|
|
}
|
|
BUG_ON(t == NULL);
|
|
|
|
/* PIO timings only ever use the first treg */
|
|
priv->treg[adev->devno][0] |= t->reg1;
|
|
|
|
/* Now get DMA timings */
|
|
t = pata_macio_find_timing(priv, adev->dma_mode);
|
|
if (t == NULL || (t->reg1 == 0 && t->reg2 == 0)) {
|
|
dev_dbg(priv->dev, "DMA timing not set yet, using MW_DMA_0\n");
|
|
t = pata_macio_find_timing(priv, XFER_MW_DMA_0);
|
|
}
|
|
BUG_ON(t == NULL);
|
|
|
|
/* DMA timings can use both tregs */
|
|
priv->treg[adev->devno][0] |= t->reg1;
|
|
priv->treg[adev->devno][1] |= t->reg2;
|
|
|
|
dev_dbg(priv->dev, " -> %08x %08x\n",
|
|
priv->treg[adev->devno][0],
|
|
priv->treg[adev->devno][1]);
|
|
|
|
/* Apply to hardware */
|
|
pata_macio_apply_timings(ap, adev->devno);
|
|
}
|
|
|
|
/*
|
|
* Blast some well known "safe" values to the timing registers at init or
|
|
* wakeup from sleep time, before we do real calculation
|
|
*/
|
|
static void pata_macio_default_timings(struct pata_macio_priv *priv)
|
|
{
|
|
unsigned int value, value2 = 0;
|
|
|
|
switch(priv->kind) {
|
|
case controller_sh_ata6:
|
|
value = 0x0a820c97;
|
|
value2 = 0x00033031;
|
|
break;
|
|
case controller_un_ata6:
|
|
case controller_k2_ata6:
|
|
value = 0x08618a92;
|
|
value2 = 0x00002921;
|
|
break;
|
|
case controller_kl_ata4:
|
|
value = 0x0008438c;
|
|
break;
|
|
case controller_kl_ata3:
|
|
value = 0x00084526;
|
|
break;
|
|
case controller_heathrow:
|
|
case controller_ohare:
|
|
default:
|
|
value = 0x00074526;
|
|
break;
|
|
}
|
|
priv->treg[0][0] = priv->treg[1][0] = value;
|
|
priv->treg[0][1] = priv->treg[1][1] = value2;
|
|
}
|
|
|
|
static int pata_macio_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
/* Get cable type from device-tree */
|
|
if (priv->kind == controller_kl_ata4 ||
|
|
priv->kind == controller_un_ata6 ||
|
|
priv->kind == controller_k2_ata6 ||
|
|
priv->kind == controller_sh_ata6) {
|
|
const char* cable = of_get_property(priv->node, "cable-type",
|
|
NULL);
|
|
struct device_node *root = of_find_node_by_path("/");
|
|
const char *model = of_get_property(root, "model", NULL);
|
|
|
|
if (cable && !strncmp(cable, "80-", 3)) {
|
|
/* Some drives fail to detect 80c cable in PowerBook
|
|
* These machine use proprietary short IDE cable
|
|
* anyway
|
|
*/
|
|
if (!strncmp(model, "PowerBook", 9))
|
|
return ATA_CBL_PATA40_SHORT;
|
|
else
|
|
return ATA_CBL_PATA80;
|
|
}
|
|
}
|
|
|
|
/* G5's seem to have incorrect cable type in device-tree.
|
|
* Let's assume they always have a 80 conductor cable, this seem to
|
|
* be always the case unless the user mucked around
|
|
*/
|
|
if (of_device_is_compatible(priv->node, "K2-UATA") ||
|
|
of_device_is_compatible(priv->node, "shasta-ata"))
|
|
return ATA_CBL_PATA80;
|
|
|
|
/* Anything else is 40 connectors */
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
|
|
static void pata_macio_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
unsigned int write = (qc->tf.flags & ATA_TFLAG_WRITE);
|
|
struct ata_port *ap = qc->ap;
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
struct scatterlist *sg;
|
|
struct dbdma_cmd *table;
|
|
unsigned int si, pi;
|
|
|
|
dev_dbgdma(priv->dev, "%s: qc %p flags %lx, write %d dev %d\n",
|
|
__func__, qc, qc->flags, write, qc->dev->devno);
|
|
|
|
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
|
|
return;
|
|
|
|
table = (struct dbdma_cmd *) priv->dma_table_cpu;
|
|
|
|
pi = 0;
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
u32 addr, sg_len, len;
|
|
|
|
/* determine if physical DMA addr spans 64K boundary.
|
|
* Note h/w doesn't support 64-bit, so we unconditionally
|
|
* truncate dma_addr_t to u32.
|
|
*/
|
|
addr = (u32) sg_dma_address(sg);
|
|
sg_len = sg_dma_len(sg);
|
|
|
|
while (sg_len) {
|
|
/* table overflow should never happen */
|
|
BUG_ON (pi++ >= MAX_DCMDS);
|
|
|
|
len = (sg_len < MAX_DBDMA_SEG) ? sg_len : MAX_DBDMA_SEG;
|
|
st_le16(&table->command, write ? OUTPUT_MORE: INPUT_MORE);
|
|
st_le16(&table->req_count, len);
|
|
st_le32(&table->phy_addr, addr);
|
|
table->cmd_dep = 0;
|
|
table->xfer_status = 0;
|
|
table->res_count = 0;
|
|
addr += len;
|
|
sg_len -= len;
|
|
++table;
|
|
}
|
|
}
|
|
|
|
/* Should never happen according to Tejun */
|
|
BUG_ON(!pi);
|
|
|
|
/* Convert the last command to an input/output */
|
|
table--;
|
|
st_le16(&table->command, write ? OUTPUT_LAST: INPUT_LAST);
|
|
table++;
|
|
|
|
/* Add the stop command to the end of the list */
|
|
memset(table, 0, sizeof(struct dbdma_cmd));
|
|
st_le16(&table->command, DBDMA_STOP);
|
|
|
|
dev_dbgdma(priv->dev, "%s: %d DMA list entries\n", __func__, pi);
|
|
}
|
|
|
|
|
|
static void pata_macio_freeze(struct ata_port *ap)
|
|
{
|
|
struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
|
|
|
|
if (dma_regs) {
|
|
unsigned int timeout = 1000000;
|
|
|
|
/* Make sure DMA controller is stopped */
|
|
writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma_regs->control);
|
|
while (--timeout && (readl(&dma_regs->status) & RUN))
|
|
udelay(1);
|
|
}
|
|
|
|
ata_sff_freeze(ap);
|
|
}
|
|
|
|
|
|
static void pata_macio_bmdma_setup(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
|
|
int dev = qc->dev->devno;
|
|
|
|
dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
|
|
|
|
/* Make sure DMA commands updates are visible */
|
|
writel(priv->dma_table_dma, &dma_regs->cmdptr);
|
|
|
|
/* On KeyLargo 66Mhz cell, we need to add 60ns to wrDataSetup on
|
|
* UDMA reads
|
|
*/
|
|
if (priv->kind == controller_kl_ata4 &&
|
|
(priv->treg[dev][0] & TR_66_UDMA_EN)) {
|
|
void __iomem *rbase = ap->ioaddr.cmd_addr;
|
|
u32 reg = priv->treg[dev][0];
|
|
|
|
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
|
|
reg += 0x00800000;
|
|
writel(reg, rbase + IDE_TIMING_CONFIG);
|
|
}
|
|
|
|
/* issue r/w command */
|
|
ap->ops->sff_exec_command(ap, &qc->tf);
|
|
}
|
|
|
|
static void pata_macio_bmdma_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
|
|
|
|
dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
|
|
|
|
writel((RUN << 16) | RUN, &dma_regs->control);
|
|
/* Make sure it gets to the controller right now */
|
|
(void)readl(&dma_regs->control);
|
|
}
|
|
|
|
static void pata_macio_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
|
|
unsigned int timeout = 1000000;
|
|
|
|
dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
|
|
|
|
/* Stop the DMA engine and wait for it to full halt */
|
|
writel (((RUN|WAKE|DEAD) << 16), &dma_regs->control);
|
|
while (--timeout && (readl(&dma_regs->status) & RUN))
|
|
udelay(1);
|
|
}
|
|
|
|
static u8 pata_macio_bmdma_status(struct ata_port *ap)
|
|
{
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
|
|
u32 dstat, rstat = ATA_DMA_INTR;
|
|
unsigned long timeout = 0;
|
|
|
|
dstat = readl(&dma_regs->status);
|
|
|
|
dev_dbgdma(priv->dev, "%s: dstat=%x\n", __func__, dstat);
|
|
|
|
/* We have two things to deal with here:
|
|
*
|
|
* - The dbdma won't stop if the command was started
|
|
* but completed with an error without transferring all
|
|
* datas. This happens when bad blocks are met during
|
|
* a multi-block transfer.
|
|
*
|
|
* - The dbdma fifo hasn't yet finished flushing to
|
|
* to system memory when the disk interrupt occurs.
|
|
*
|
|
*/
|
|
|
|
/* First check for errors */
|
|
if ((dstat & (RUN|DEAD)) != RUN)
|
|
rstat |= ATA_DMA_ERR;
|
|
|
|
/* If ACTIVE is cleared, the STOP command has been hit and
|
|
* the transfer is complete. If not, we have to flush the
|
|
* channel.
|
|
*/
|
|
if ((dstat & ACTIVE) == 0)
|
|
return rstat;
|
|
|
|
dev_dbgdma(priv->dev, "%s: DMA still active, flushing...\n", __func__);
|
|
|
|
/* If dbdma didn't execute the STOP command yet, the
|
|
* active bit is still set. We consider that we aren't
|
|
* sharing interrupts (which is hopefully the case with
|
|
* those controllers) and so we just try to flush the
|
|
* channel for pending data in the fifo
|
|
*/
|
|
udelay(1);
|
|
writel((FLUSH << 16) | FLUSH, &dma_regs->control);
|
|
for (;;) {
|
|
udelay(1);
|
|
dstat = readl(&dma_regs->status);
|
|
if ((dstat & FLUSH) == 0)
|
|
break;
|
|
if (++timeout > 1000) {
|
|
dev_warn(priv->dev, "timeout flushing DMA\n");
|
|
rstat |= ATA_DMA_ERR;
|
|
break;
|
|
}
|
|
}
|
|
return rstat;
|
|
}
|
|
|
|
/* port_start is when we allocate the DMA command list */
|
|
static int pata_macio_port_start(struct ata_port *ap)
|
|
{
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
if (ap->ioaddr.bmdma_addr == NULL)
|
|
return 0;
|
|
|
|
/* Allocate space for the DBDMA commands.
|
|
*
|
|
* The +2 is +1 for the stop command and +1 to allow for
|
|
* aligning the start address to a multiple of 16 bytes.
|
|
*/
|
|
priv->dma_table_cpu =
|
|
dmam_alloc_coherent(priv->dev,
|
|
(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
|
|
&priv->dma_table_dma, GFP_KERNEL);
|
|
if (priv->dma_table_cpu == NULL) {
|
|
dev_err(priv->dev, "Unable to allocate DMA command list\n");
|
|
ap->ioaddr.bmdma_addr = NULL;
|
|
ap->mwdma_mask = 0;
|
|
ap->udma_mask = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void pata_macio_irq_clear(struct ata_port *ap)
|
|
{
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
|
|
/* Nothing to do here */
|
|
|
|
dev_dbgdma(priv->dev, "%s\n", __func__);
|
|
}
|
|
|
|
static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
|
|
{
|
|
dev_dbg(priv->dev, "Enabling & resetting... \n");
|
|
|
|
if (priv->mediabay)
|
|
return;
|
|
|
|
if (priv->kind == controller_ohare && !resume) {
|
|
/* The code below is having trouble on some ohare machines
|
|
* (timing related ?). Until I can put my hand on one of these
|
|
* units, I keep the old way
|
|
*/
|
|
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, 0, 1);
|
|
} else {
|
|
int rc;
|
|
|
|
/* Reset and enable controller */
|
|
rc = ppc_md.feature_call(PMAC_FTR_IDE_RESET,
|
|
priv->node, priv->aapl_bus_id, 1);
|
|
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE,
|
|
priv->node, priv->aapl_bus_id, 1);
|
|
msleep(10);
|
|
/* Only bother waiting if there's a reset control */
|
|
if (rc == 0) {
|
|
ppc_md.feature_call(PMAC_FTR_IDE_RESET,
|
|
priv->node, priv->aapl_bus_id, 0);
|
|
msleep(IDE_WAKEUP_DELAY_MS);
|
|
}
|
|
}
|
|
|
|
/* If resuming a PCI device, restore the config space here */
|
|
if (priv->pdev && resume) {
|
|
int rc;
|
|
|
|
pci_restore_state(priv->pdev);
|
|
rc = pcim_enable_device(priv->pdev);
|
|
if (rc)
|
|
dev_printk(KERN_ERR, &priv->pdev->dev,
|
|
"Failed to enable device after resume (%d)\n", rc);
|
|
else
|
|
pci_set_master(priv->pdev);
|
|
}
|
|
|
|
/* On Kauai, initialize the FCR. We don't perform a reset, doesn't really
|
|
* seem necessary and speeds up the boot process
|
|
*/
|
|
if (priv->kauai_fcr)
|
|
writel(KAUAI_FCR_UATA_MAGIC |
|
|
KAUAI_FCR_UATA_RESET_N |
|
|
KAUAI_FCR_UATA_ENABLE, priv->kauai_fcr);
|
|
}
|
|
|
|
/* Hook the standard slave config to fixup some HW related alignment
|
|
* restrictions
|
|
*/
|
|
static int pata_macio_slave_config(struct scsi_device *sdev)
|
|
{
|
|
struct ata_port *ap = ata_shost_to_port(sdev->host);
|
|
struct pata_macio_priv *priv = ap->private_data;
|
|
struct ata_device *dev;
|
|
u16 cmd;
|
|
int rc;
|
|
|
|
/* First call original */
|
|
rc = ata_scsi_slave_config(sdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* This is lifted from sata_nv */
|
|
dev = &ap->link.device[sdev->id];
|
|
|
|
/* OHare has issues with non cache aligned DMA on some chipsets */
|
|
if (priv->kind == controller_ohare) {
|
|
blk_queue_update_dma_alignment(sdev->request_queue, 31);
|
|
blk_queue_update_dma_pad(sdev->request_queue, 31);
|
|
|
|
/* Tell the world about it */
|
|
ata_dev_printk(dev, KERN_INFO, "OHare alignment limits applied\n");
|
|
return 0;
|
|
}
|
|
|
|
/* We only have issues with ATAPI */
|
|
if (dev->class != ATA_DEV_ATAPI)
|
|
return 0;
|
|
|
|
/* Shasta and K2 seem to have "issues" with reads ... */
|
|
if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) {
|
|
/* Allright these are bad, apply restrictions */
|
|
blk_queue_update_dma_alignment(sdev->request_queue, 15);
|
|
blk_queue_update_dma_pad(sdev->request_queue, 15);
|
|
|
|
/* We enable MWI and hack cache line size directly here, this
|
|
* is specific to this chipset and not normal values, we happen
|
|
* to somewhat know what we are doing here (which is basically
|
|
* to do the same Apple does and pray they did not get it wrong :-)
|
|
*/
|
|
BUG_ON(!priv->pdev);
|
|
pci_write_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, 0x08);
|
|
pci_read_config_word(priv->pdev, PCI_COMMAND, &cmd);
|
|
pci_write_config_word(priv->pdev, PCI_COMMAND,
|
|
cmd | PCI_COMMAND_INVALIDATE);
|
|
|
|
/* Tell the world about it */
|
|
ata_dev_printk(dev, KERN_INFO,
|
|
"K2/Shasta alignment limits applied\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int pata_macio_do_suspend(struct pata_macio_priv *priv, pm_message_t mesg)
|
|
{
|
|
int rc;
|
|
|
|
/* First, core libata suspend to do most of the work */
|
|
rc = ata_host_suspend(priv->host, mesg);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Restore to default timings */
|
|
pata_macio_default_timings(priv);
|
|
|
|
/* Mask interrupt. Not strictly necessary but old driver did
|
|
* it and I'd rather not change that here */
|
|
disable_irq(priv->irq);
|
|
|
|
/* The media bay will handle itself just fine */
|
|
if (priv->mediabay)
|
|
return 0;
|
|
|
|
/* Kauai has bus control FCRs directly here */
|
|
if (priv->kauai_fcr) {
|
|
u32 fcr = readl(priv->kauai_fcr);
|
|
fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
|
|
writel(fcr, priv->kauai_fcr);
|
|
}
|
|
|
|
/* For PCI, save state and disable DMA. No need to call
|
|
* pci_set_power_state(), the HW doesn't do D states that
|
|
* way, the platform code will take care of suspending the
|
|
* ASIC properly
|
|
*/
|
|
if (priv->pdev) {
|
|
pci_save_state(priv->pdev);
|
|
pci_disable_device(priv->pdev);
|
|
}
|
|
|
|
/* Disable the bus on older machines and the cell on kauai */
|
|
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node,
|
|
priv->aapl_bus_id, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pata_macio_do_resume(struct pata_macio_priv *priv)
|
|
{
|
|
/* Reset and re-enable the HW */
|
|
pata_macio_reset_hw(priv, 1);
|
|
|
|
/* Sanitize drive timings */
|
|
pata_macio_apply_timings(priv->host->ports[0], 0);
|
|
|
|
/* We want our IRQ back ! */
|
|
enable_irq(priv->irq);
|
|
|
|
/* Let the libata core take it from there */
|
|
ata_host_resume(priv->host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct scsi_host_template pata_macio_sht = {
|
|
ATA_BASE_SHT(DRV_NAME),
|
|
.sg_tablesize = MAX_DCMDS,
|
|
/* We may not need that strict one */
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = pata_macio_slave_config,
|
|
};
|
|
|
|
static struct ata_port_operations pata_macio_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
|
|
.freeze = pata_macio_freeze,
|
|
.set_piomode = pata_macio_set_timings,
|
|
.set_dmamode = pata_macio_set_timings,
|
|
.cable_detect = pata_macio_cable_detect,
|
|
.sff_dev_select = pata_macio_dev_select,
|
|
.qc_prep = pata_macio_qc_prep,
|
|
.bmdma_setup = pata_macio_bmdma_setup,
|
|
.bmdma_start = pata_macio_bmdma_start,
|
|
.bmdma_stop = pata_macio_bmdma_stop,
|
|
.bmdma_status = pata_macio_bmdma_status,
|
|
.port_start = pata_macio_port_start,
|
|
.sff_irq_clear = pata_macio_irq_clear,
|
|
};
|
|
|
|
static void __devinit pata_macio_invariants(struct pata_macio_priv *priv)
|
|
{
|
|
const int *bidp;
|
|
|
|
/* Identify the type of controller */
|
|
if (of_device_is_compatible(priv->node, "shasta-ata")) {
|
|
priv->kind = controller_sh_ata6;
|
|
priv->timings = pata_macio_shasta_timings;
|
|
} else if (of_device_is_compatible(priv->node, "kauai-ata")) {
|
|
priv->kind = controller_un_ata6;
|
|
priv->timings = pata_macio_kauai_timings;
|
|
} else if (of_device_is_compatible(priv->node, "K2-UATA")) {
|
|
priv->kind = controller_k2_ata6;
|
|
priv->timings = pata_macio_kauai_timings;
|
|
} else if (of_device_is_compatible(priv->node, "keylargo-ata")) {
|
|
if (strcmp(priv->node->name, "ata-4") == 0) {
|
|
priv->kind = controller_kl_ata4;
|
|
priv->timings = pata_macio_kl66_timings;
|
|
} else {
|
|
priv->kind = controller_kl_ata3;
|
|
priv->timings = pata_macio_kl33_timings;
|
|
}
|
|
} else if (of_device_is_compatible(priv->node, "heathrow-ata")) {
|
|
priv->kind = controller_heathrow;
|
|
priv->timings = pata_macio_heathrow_timings;
|
|
} else {
|
|
priv->kind = controller_ohare;
|
|
priv->timings = pata_macio_ohare_timings;
|
|
}
|
|
|
|
/* XXX FIXME --- setup priv->mediabay here */
|
|
|
|
/* Get Apple bus ID (for clock and ASIC control) */
|
|
bidp = of_get_property(priv->node, "AAPL,bus-id", NULL);
|
|
priv->aapl_bus_id = bidp ? *bidp : 0;
|
|
|
|
/* Fixup missing Apple bus ID in case of media-bay */
|
|
if (priv->mediabay && bidp == 0)
|
|
priv->aapl_bus_id = 1;
|
|
}
|
|
|
|
static void __devinit pata_macio_setup_ios(struct ata_ioports *ioaddr,
|
|
void __iomem * base,
|
|
void __iomem * dma)
|
|
{
|
|
/* cmd_addr is the base of regs for that port */
|
|
ioaddr->cmd_addr = base;
|
|
|
|
/* taskfile registers */
|
|
ioaddr->data_addr = base + (ATA_REG_DATA << 4);
|
|
ioaddr->error_addr = base + (ATA_REG_ERR << 4);
|
|
ioaddr->feature_addr = base + (ATA_REG_FEATURE << 4);
|
|
ioaddr->nsect_addr = base + (ATA_REG_NSECT << 4);
|
|
ioaddr->lbal_addr = base + (ATA_REG_LBAL << 4);
|
|
ioaddr->lbam_addr = base + (ATA_REG_LBAM << 4);
|
|
ioaddr->lbah_addr = base + (ATA_REG_LBAH << 4);
|
|
ioaddr->device_addr = base + (ATA_REG_DEVICE << 4);
|
|
ioaddr->status_addr = base + (ATA_REG_STATUS << 4);
|
|
ioaddr->command_addr = base + (ATA_REG_CMD << 4);
|
|
ioaddr->altstatus_addr = base + 0x160;
|
|
ioaddr->ctl_addr = base + 0x160;
|
|
ioaddr->bmdma_addr = dma;
|
|
}
|
|
|
|
static void __devinit pmac_macio_calc_timing_masks(struct pata_macio_priv *priv,
|
|
struct ata_port_info *pinfo)
|
|
{
|
|
int i = 0;
|
|
|
|
pinfo->pio_mask = 0;
|
|
pinfo->mwdma_mask = 0;
|
|
pinfo->udma_mask = 0;
|
|
|
|
while (priv->timings[i].mode > 0) {
|
|
unsigned int mask = 1U << (priv->timings[i].mode & 0x0f);
|
|
switch(priv->timings[i].mode & 0xf0) {
|
|
case 0x00: /* PIO */
|
|
pinfo->pio_mask |= (mask >> 8);
|
|
break;
|
|
case 0x20: /* MWDMA */
|
|
pinfo->mwdma_mask |= mask;
|
|
break;
|
|
case 0x40: /* UDMA */
|
|
pinfo->udma_mask |= mask;
|
|
break;
|
|
}
|
|
i++;
|
|
}
|
|
dev_dbg(priv->dev, "Supported masks: PIO=%lx, MWDMA=%lx, UDMA=%lx\n",
|
|
pinfo->pio_mask, pinfo->mwdma_mask, pinfo->udma_mask);
|
|
}
|
|
|
|
static int __devinit pata_macio_common_init(struct pata_macio_priv *priv,
|
|
resource_size_t tfregs,
|
|
resource_size_t dmaregs,
|
|
resource_size_t fcregs,
|
|
unsigned long irq)
|
|
{
|
|
struct ata_port_info pinfo;
|
|
const struct ata_port_info *ppi[] = { &pinfo, NULL };
|
|
void __iomem *dma_regs = NULL;
|
|
|
|
/* Fill up privates with various invariants collected from the
|
|
* device-tree
|
|
*/
|
|
pata_macio_invariants(priv);
|
|
|
|
/* Make sure we have sane initial timings in the cache */
|
|
pata_macio_default_timings(priv);
|
|
|
|
/* Not sure what the real max is but we know it's less than 64K, let's
|
|
* use 64K minus 256
|
|
*/
|
|
dma_set_max_seg_size(priv->dev, MAX_DBDMA_SEG);
|
|
|
|
/* Allocate libata host for 1 port */
|
|
memset(&pinfo, 0, sizeof(struct ata_port_info));
|
|
pmac_macio_calc_timing_masks(priv, &pinfo);
|
|
pinfo.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO |
|
|
ATA_FLAG_NO_LEGACY;
|
|
pinfo.port_ops = &pata_macio_ops;
|
|
pinfo.private_data = priv;
|
|
|
|
priv->host = ata_host_alloc_pinfo(priv->dev, ppi, 1);
|
|
if (priv->host == NULL) {
|
|
dev_err(priv->dev, "Failed to allocate ATA port structure\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Setup the private data in host too */
|
|
priv->host->private_data = priv;
|
|
|
|
/* Map base registers */
|
|
priv->tfregs = devm_ioremap(priv->dev, tfregs, 0x100);
|
|
if (priv->tfregs == NULL) {
|
|
dev_err(priv->dev, "Failed to map ATA ports\n");
|
|
return -ENOMEM;
|
|
}
|
|
priv->host->iomap = &priv->tfregs;
|
|
|
|
/* Map DMA regs */
|
|
if (dmaregs != 0) {
|
|
dma_regs = devm_ioremap(priv->dev, dmaregs,
|
|
sizeof(struct dbdma_regs));
|
|
if (dma_regs == NULL)
|
|
dev_warn(priv->dev, "Failed to map ATA DMA registers\n");
|
|
}
|
|
|
|
/* If chip has local feature control, map those regs too */
|
|
if (fcregs != 0) {
|
|
priv->kauai_fcr = devm_ioremap(priv->dev, fcregs, 4);
|
|
if (priv->kauai_fcr == NULL) {
|
|
dev_err(priv->dev, "Failed to map ATA FCR register\n");
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
/* Setup port data structure */
|
|
pata_macio_setup_ios(&priv->host->ports[0]->ioaddr,
|
|
priv->tfregs, dma_regs);
|
|
priv->host->ports[0]->private_data = priv;
|
|
|
|
/* hard-reset the controller */
|
|
pata_macio_reset_hw(priv, 0);
|
|
pata_macio_apply_timings(priv->host->ports[0], 0);
|
|
|
|
/* Enable bus master if necessary */
|
|
if (priv->pdev && dma_regs)
|
|
pci_set_master(priv->pdev);
|
|
|
|
dev_info(priv->dev, "Activating pata-macio chipset %s, Apple bus ID %d\n",
|
|
macio_ata_names[priv->kind], priv->aapl_bus_id);
|
|
|
|
/* Start it up */
|
|
priv->irq = irq;
|
|
return ata_host_activate(priv->host, irq, ata_bmdma_interrupt, 0,
|
|
&pata_macio_sht);
|
|
}
|
|
|
|
static int __devinit pata_macio_attach(struct macio_dev *mdev,
|
|
const struct of_device_id *match)
|
|
{
|
|
struct pata_macio_priv *priv;
|
|
resource_size_t tfregs, dmaregs = 0;
|
|
unsigned long irq;
|
|
int rc;
|
|
|
|
/* Check for broken device-trees */
|
|
if (macio_resource_count(mdev) == 0) {
|
|
dev_err(&mdev->ofdev.dev,
|
|
"No addresses for controller\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* Enable managed resources */
|
|
macio_enable_devres(mdev);
|
|
|
|
/* Allocate and init private data structure */
|
|
priv = devm_kzalloc(&mdev->ofdev.dev,
|
|
sizeof(struct pata_macio_priv), GFP_KERNEL);
|
|
if (priv == NULL) {
|
|
dev_err(&mdev->ofdev.dev,
|
|
"Failed to allocate private memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
priv->node = of_node_get(mdev->ofdev.dev.of_node);
|
|
priv->mdev = mdev;
|
|
priv->dev = &mdev->ofdev.dev;
|
|
|
|
/* Request memory resource for taskfile registers */
|
|
if (macio_request_resource(mdev, 0, "pata-macio")) {
|
|
dev_err(&mdev->ofdev.dev,
|
|
"Cannot obtain taskfile resource\n");
|
|
return -EBUSY;
|
|
}
|
|
tfregs = macio_resource_start(mdev, 0);
|
|
|
|
/* Request resources for DMA registers if any */
|
|
if (macio_resource_count(mdev) >= 2) {
|
|
if (macio_request_resource(mdev, 1, "pata-macio-dma"))
|
|
dev_err(&mdev->ofdev.dev,
|
|
"Cannot obtain DMA resource\n");
|
|
else
|
|
dmaregs = macio_resource_start(mdev, 1);
|
|
}
|
|
|
|
/*
|
|
* Fixup missing IRQ for some old implementations with broken
|
|
* device-trees.
|
|
*
|
|
* This is a bit bogus, it should be fixed in the device-tree itself,
|
|
* via the existing macio fixups, based on the type of interrupt
|
|
* controller in the machine. However, I have no test HW for this case,
|
|
* and this trick works well enough on those old machines...
|
|
*/
|
|
if (macio_irq_count(mdev) == 0) {
|
|
dev_warn(&mdev->ofdev.dev,
|
|
"No interrupts for controller, using 13\n");
|
|
irq = irq_create_mapping(NULL, 13);
|
|
} else
|
|
irq = macio_irq(mdev, 0);
|
|
|
|
/* Prevvent media bay callbacks until fully registered */
|
|
lock_media_bay(priv->mdev->media_bay);
|
|
|
|
/* Get register addresses and call common initialization */
|
|
rc = pata_macio_common_init(priv,
|
|
tfregs, /* Taskfile regs */
|
|
dmaregs, /* DBDMA regs */
|
|
0, /* Feature control */
|
|
irq);
|
|
unlock_media_bay(priv->mdev->media_bay);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int __devexit pata_macio_detach(struct macio_dev *mdev)
|
|
{
|
|
struct ata_host *host = macio_get_drvdata(mdev);
|
|
struct pata_macio_priv *priv = host->private_data;
|
|
|
|
lock_media_bay(priv->mdev->media_bay);
|
|
|
|
/* Make sure the mediabay callback doesn't try to access
|
|
* dead stuff
|
|
*/
|
|
priv->host->private_data = NULL;
|
|
|
|
ata_host_detach(host);
|
|
|
|
unlock_media_bay(priv->mdev->media_bay);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int pata_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
|
|
{
|
|
struct ata_host *host = macio_get_drvdata(mdev);
|
|
|
|
return pata_macio_do_suspend(host->private_data, mesg);
|
|
}
|
|
|
|
static int pata_macio_resume(struct macio_dev *mdev)
|
|
{
|
|
struct ata_host *host = macio_get_drvdata(mdev);
|
|
|
|
return pata_macio_do_resume(host->private_data);
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
#ifdef CONFIG_PMAC_MEDIABAY
|
|
static void pata_macio_mb_event(struct macio_dev* mdev, int mb_state)
|
|
{
|
|
struct ata_host *host = macio_get_drvdata(mdev);
|
|
struct ata_port *ap;
|
|
struct ata_eh_info *ehi;
|
|
struct ata_device *dev;
|
|
unsigned long flags;
|
|
|
|
if (!host || !host->private_data)
|
|
return;
|
|
ap = host->ports[0];
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
ehi = &ap->link.eh_info;
|
|
if (mb_state == MB_CD) {
|
|
ata_ehi_push_desc(ehi, "mediabay plug");
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_port_freeze(ap);
|
|
} else {
|
|
ata_ehi_push_desc(ehi, "mediabay unplug");
|
|
ata_for_each_dev(dev, &ap->link, ALL)
|
|
dev->flags |= ATA_DFLAG_DETACH;
|
|
ata_port_abort(ap);
|
|
}
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
|
|
}
|
|
#endif /* CONFIG_PMAC_MEDIABAY */
|
|
|
|
|
|
static int __devinit pata_macio_pci_attach(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
struct pata_macio_priv *priv;
|
|
struct device_node *np;
|
|
resource_size_t rbase;
|
|
|
|
/* We cannot use a MacIO controller without its OF device node */
|
|
np = pci_device_to_OF_node(pdev);
|
|
if (np == NULL) {
|
|
dev_err(&pdev->dev,
|
|
"Cannot find OF device node for controller\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Check that it can be enabled */
|
|
if (pcim_enable_device(pdev)) {
|
|
dev_err(&pdev->dev,
|
|
"Cannot enable controller PCI device\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* Allocate and init private data structure */
|
|
priv = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct pata_macio_priv), GFP_KERNEL);
|
|
if (priv == NULL) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to allocate private memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
priv->node = of_node_get(np);
|
|
priv->pdev = pdev;
|
|
priv->dev = &pdev->dev;
|
|
|
|
/* Get MMIO regions */
|
|
if (pci_request_regions(pdev, "pata-macio")) {
|
|
dev_err(&pdev->dev,
|
|
"Cannot obtain PCI resources\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Get register addresses and call common initialization */
|
|
rbase = pci_resource_start(pdev, 0);
|
|
if (pata_macio_common_init(priv,
|
|
rbase + 0x2000, /* Taskfile regs */
|
|
rbase + 0x1000, /* DBDMA regs */
|
|
rbase, /* Feature control */
|
|
pdev->irq))
|
|
return -ENXIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __devexit pata_macio_pci_detach(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
|
|
ata_host_detach(host);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int pata_macio_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
|
|
return pata_macio_do_suspend(host->private_data, mesg);
|
|
}
|
|
|
|
static int pata_macio_pci_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
|
|
return pata_macio_do_resume(host->private_data);
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct of_device_id pata_macio_match[] =
|
|
{
|
|
{
|
|
.name = "IDE",
|
|
},
|
|
{
|
|
.name = "ATA",
|
|
},
|
|
{
|
|
.type = "ide",
|
|
},
|
|
{
|
|
.type = "ata",
|
|
},
|
|
{},
|
|
};
|
|
|
|
static struct macio_driver pata_macio_driver =
|
|
{
|
|
.driver = {
|
|
.name = "pata-macio",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = pata_macio_match,
|
|
},
|
|
.probe = pata_macio_attach,
|
|
.remove = pata_macio_detach,
|
|
#ifdef CONFIG_PM
|
|
.suspend = pata_macio_suspend,
|
|
.resume = pata_macio_resume,
|
|
#endif
|
|
#ifdef CONFIG_PMAC_MEDIABAY
|
|
.mediabay_event = pata_macio_mb_event,
|
|
#endif
|
|
};
|
|
|
|
static const struct pci_device_id pata_macio_pci_match[] = {
|
|
{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 },
|
|
{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 },
|
|
{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 },
|
|
{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 },
|
|
{ PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 },
|
|
{},
|
|
};
|
|
|
|
static struct pci_driver pata_macio_pci_driver = {
|
|
.name = "pata-pci-macio",
|
|
.id_table = pata_macio_pci_match,
|
|
.probe = pata_macio_pci_attach,
|
|
.remove = pata_macio_pci_detach,
|
|
#ifdef CONFIG_PM
|
|
.suspend = pata_macio_pci_suspend,
|
|
.resume = pata_macio_pci_resume,
|
|
#endif
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, pata_macio_pci_match);
|
|
|
|
|
|
static int __init pata_macio_init(void)
|
|
{
|
|
int rc;
|
|
|
|
if (!machine_is(powermac))
|
|
return -ENODEV;
|
|
|
|
rc = pci_register_driver(&pata_macio_pci_driver);
|
|
if (rc)
|
|
return rc;
|
|
rc = macio_register_driver(&pata_macio_driver);
|
|
if (rc) {
|
|
pci_unregister_driver(&pata_macio_pci_driver);
|
|
return rc;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void __exit pata_macio_exit(void)
|
|
{
|
|
macio_unregister_driver(&pata_macio_driver);
|
|
pci_unregister_driver(&pata_macio_pci_driver);
|
|
}
|
|
|
|
module_init(pata_macio_init);
|
|
module_exit(pata_macio_exit);
|
|
|
|
MODULE_AUTHOR("Benjamin Herrenschmidt");
|
|
MODULE_DESCRIPTION("Apple MacIO PATA driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|