mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-25 11:55:37 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/leds
History
Florian Eckert 6dec659896 leds: ledtrig-tty: Add additional line state evaluation 
The serial tty interface also supports additional input signals, that
can also be evaluated within this trigger. This change is adding the
following additional input sources, which could be controlled
via the '/sys/class/<leds>/' sysfs interface.

Explanation:
DCE = Data Communication Equipment (Modem)
DTE = Data Terminal Equipment (Computer)

- cts:
  DCE is ready to accept data from the DTE (CTS = Clear To Send). If
  the line state is detected, the LED is switched on.
  If set to 0 (default), the LED will not evaluate CTS.
  If set to 1, the LED will evaluate CTS.

- dsr:
  DCE is ready to receive and send data (DSR = Data Set Ready). If the
  line state is detected, the LED is switched on.
  If set to 0 (default), the LED will not evaluate DSR.
  If set to 1, the LED will evaluate DSR.

- dcd:
  DTE is receiving a carrier from the DCE (DCD = Data Carrier Detect).
  If the line state is detected, the LED is switched on.
  If set to 0 (default), the LED will not evaluate DCD.
  If set to 1, the LED will evaluate DCD.

- rng:
  DCE has detected an incoming ring signal on the telephone line
  (RNG = Ring Indicator). If the line state is detected, the LED is
  switched on.
  If set to 0 (default), the LED will not evaluate RNG.
  If set to 1, the LED will evaluate RNG.

Also add an invert flag on LED blink, so that the LED blinks in the
correct order.

* If one off the new enabled input signals are evaluatet as 'enabled',
  and data are transmitted, then the LED should first blink 'off' and
  then 'on' (invert).
* If all the new enabled input signals are evaluatet as 'disabled',
  and data are transmitted, then the LED should first blink 'on' and
  then 'off'.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Reviewed-by: Maarten Brock <m.brock@vanmierlo.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231127110311.3583957-5-fe@dev.tdt.de
Signed-off-by: Lee Jones <lee@kernel.org>
2023-12-13 11:28:51 +00:00
..
blink leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
flash leds: lm3601x: Convert to use maple tree register cache 2023-11-01 11:29:00 +00:00
rgb leds: qcom-lpg: Consistenly use dev_err_probe() in .probe()'s error path 2023-12-13 11:28:45 +00:00
simple leds: simatic-ipc-leds-gpio: Convert to platform remove callback returning void 2023-11-01 11:28:33 +00:00
trigger leds: ledtrig-tty: Add additional line state evaluation 2023-12-13 11:28:51 +00:00
Kconfig leds: max5970: Add support for max5970 2023-12-13 11:28:41 +00:00
led-class-flash.c led-class-flash: fix -Wrestrict warning 2021-09-27 16:09:42 +02:00
led-class-multicolor.c leds: multicolor: Use rounded division when calculating color components 2023-08-17 11:25:03 +01:00
led-class.c leds: Make leds_class a static const structure 2023-08-18 08:43:11 +01:00
led-core.c - Core Frameworks 2023-11-02 14:53:19 -10:00
led-triggers.c leds: Clear LED_INIT_DEFAULT_TRIGGER when clearing current trigger 2023-05-25 12:16:33 +01:00
leds-88pm860x.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-acer-a500.c
leds-adp5520.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-an30259a.c leds: Remove redundant of_match_ptr() 2023-08-17 13:28:25 +01:00
leds-apu.c
leds-ariel.c leds: Explicitly include correct DT includes 2023-07-28 10:02:32 +01:00
leds-aw200xx.c leds: aw200xx: Convert to use maple tree register cache 2023-11-01 11:29:01 +00:00
leds-aw2013.c leds: aw2013: Enable pull-up supply for interrupt and I2C 2023-08-18 16:47:21 +01:00
leds-bcm6328.c leds: bcm6328: Get rid of custom led_init_default_state_get() 2023-01-30 08:03:37 +00:00
leds-bcm6358.c leds: bcm6358: Get rid of custom led_init_default_state_get() 2023-01-30 08:03:38 +00:00
leds-bd2606mvv.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-bd2802.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-blinkm.c leds: blinkm: Replace all non-returning strlcpy with strscpy 2023-05-25 12:31:18 +01:00
leds-cht-wcove.c leds: cht-wcove: Remove unneeded semicolon 2023-06-08 18:11:14 +01:00
leds-clevo-mail.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-cobalt-qube.c
leds-cobalt-raq.c
leds-cpcap.c leds: Explicitly include correct DT includes 2023-07-28 10:02:32 +01:00
leds-cr0014114.c leds: cr0014114: Annotate struct cr0014114 with __counted_by 2023-11-01 11:28:26 +00:00
leds-da903x.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-da9052.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-dac124s085.c spi: make remove callback a void function 2022-02-09 13:00:45 +00:00
leds-el15203000.c leds: el15203000: Annotate struct el15203000 with __counted_by 2023-11-01 11:28:28 +00:00
leds-gpio-register.c
leds-gpio.c leds: gpio: Update headers 2023-11-01 11:29:24 +00:00
leds-hp6xx.c
leds-ip30.c leds: ip30: Convert to devm_platform_ioremap_resource() 2023-07-28 09:26:21 +01:00
leds-ipaq-micro.c
leds-is31fl32xx.c leds: Explicitly include correct DT includes 2023-07-28 10:02:32 +01:00
leds-is31fl319x.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-lm355x.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-lm3530.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-lm3532.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-lm3533.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-lm3642.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-lm3692x.c leds: lm392x: Convert to use maple tree register cache 2023-11-01 11:29:02 +00:00
leds-lm3697.c leds: lm3697: Annotate struct lm3697 with __counted_by 2023-11-01 11:28:31 +00:00
leds-lm36274.c
leds-locomo.c ARM: pxa: split up mach/hardware.h 2022-04-19 16:27:05 +02:00
leds-lp50xx.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-lp55xx-common.c leds: lp55xx: Use gpiod_set_value_cansleep() 2023-11-01 11:28:42 +00:00
leds-lp55xx-common.h
leds-lp3944.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-lp3952.c leds: lp3952: Convert to use maple tree register cache 2023-11-01 11:29:03 +00:00
leds-lp5521.c leds: lp5521: Add an error check in lp5521_post_init_device 2023-11-01 11:29:26 +00:00
leds-lp5523.c leds: Remove redundant of_match_ptr() 2023-08-17 13:28:25 +01:00
leds-lp5562.c leds: Remove redundant of_match_ptr() 2023-08-17 13:28:25 +01:00
leds-lp8501.c leds: Remove redundant of_match_ptr() 2023-08-17 13:28:25 +01:00
leds-lp8788.c
leds-lp8860.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-lt3593.c leds: lt3593: Put fwnode in any case during ->probe() 2021-08-03 23:49:31 +02:00
leds-max5970.c leds: max5970: Add support for max5970 2023-12-13 11:28:41 +00:00
leds-max8997.c leds: max8997: Don't error if there is no pdata 2022-10-22 11:55:03 +02:00
leds-max77650.c
leds-mc13783.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-menf21bmc.c
leds-mlxcpld.c
leds-mlxreg.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-mt6323.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-net48xx.c
leds-netxbig.c
leds-nic78bx.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-ns2.c leds: ns2: Slightly simplify a memory allocation 2023-07-28 11:58:04 +01:00
leds-ot200.c
leds-pca955x.c leds: pca955x: Cleanup OF/ID table terminators 2023-11-01 11:28:55 +00:00
leds-pca963x.c leds: Switch i2c drivers back to use .probe() 2023-05-25 12:16:22 +01:00
leds-pca995x.c leds: pca995x: Fix MODULE_DEVICE_TABLE for OF 2023-08-15 18:30:07 +01:00
leds-pca9532.c leds: Explicitly include correct DT includes 2023-07-28 10:02:32 +01:00
leds-pm8058.c leds: Explicitly include correct DT includes 2023-07-28 10:02:32 +01:00
leds-powernv.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-pwm.c leds: pwm: Don't disable the PWM when the LED should be off 2023-11-01 11:28:50 +00:00
leds-rb532.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-regulator.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-sc27xx-bltc.c leds: sc27xx: Move mutex_init() down 2023-11-01 11:29:15 +00:00
leds-spi-byte.c leds: Explicitly include correct DT includes 2023-07-28 10:02:32 +01:00
leds-ss4200.c
leds-sun50i-a100.c leds: sun50i-a100: New driver for the A100 LED controller 2023-12-13 11:28:30 +00:00
leds-sunfire.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-syscon.c leds: syscon: Support 'reg' in addition to 'offset' for register address 2023-12-13 11:28:26 +00:00
leds-tca6507.c leds: tca6507: Use devm_led_classdev_register() to simplify remove path 2023-12-13 11:28:41 +00:00
leds-ti-lmu-common.c leds: Explicitly include correct DT includes 2023-07-28 10:02:32 +01:00
leds-tlc591xx.c leds: Explicitly include correct DT includes 2023-07-28 10:02:32 +01:00
leds-tps6105x.c
leds-turris-omnia.c leds: turris-omnia: Fix brightness setting and trigger activating 2023-11-01 11:29:16 +00:00
leds-wm831x-status.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-wm8350.c leds: Convert all platform drivers to return void 2023-11-01 11:28:35 +00:00
leds-wrap.c
leds.h leds: Move led_init_default_state_get() to the global header 2023-01-30 08:03:35 +00:00
Makefile leds: max5970: Add support for max5970 2023-12-13 11:28:41 +00:00
TODO
uleds.c leds: uleds: Use module_misc_device macro to simplify the code 2023-08-18 11:42:54 +01:00