mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-29 23:53:32 +00:00
f9d36cf445
When a tick broadcast clockevent device is initialized for one shot mode
then tick_broadcast_setup_oneshot() OR's the periodic broadcast mode
cpumask into the oneshot broadcast cpumask.
This is required when switching from periodic broadcast mode to oneshot
broadcast mode to ensure that CPUs which are waiting for periodic
broadcast are woken up on the next tick.
But it is subtly broken, when an active broadcast device is replaced and
the system is already in oneshot (NOHZ/HIGHRES) mode. Victor observed
this and debugged the issue.
Then the OR of the periodic broadcast CPU mask is wrong as the periodic
cpumask bits are sticky after tick_broadcast_enable() set it for a CPU
unless explicitly cleared via tick_broadcast_disable().
That means that this sets all other CPUs which have tick broadcasting
enabled at that point unconditionally in the oneshot broadcast mask.
If the affected CPUs were already idle and had their bits set in the
oneshot broadcast mask then this does no harm. But for non idle CPUs
which were not set this corrupts their state.
On their next invocation of tick_broadcast_enable() they observe the bit
set, which indicates that the broadcast for the CPU is already set up.
As a consequence they fail to update the broadcast event even if their
earliest expiring timer is before the actually programmed broadcast
event.
If the programmed broadcast event is far in the future, then this can
cause stalls or trigger the hung task detector.
Avoid this by telling tick_broadcast_setup_oneshot() explicitly whether
this is the initial switch over from periodic to oneshot broadcast which
must take the periodic broadcast mask into account. In the case of
initialization of a replacement device this prevents that the broadcast
oneshot mask is modified.
There is a second problem with broadcast device replacement in this
function. The broadcast device is only armed when the previous state of
the device was periodic.
That is correct for the switch from periodic broadcast mode to oneshot
broadcast mode as the underlying broadcast device could operate in
oneshot state already due to lack of periodic state in hardware. In that
case it is already armed to expire at the next tick.
For the replacement case this is wrong as the device is in shutdown
state. That means that any already pending broadcast event will not be
armed.
This went unnoticed because any CPU which goes idle will observe that
the broadcast device has an expiry time of KTIME_MAX and therefore any
CPUs next timer event will be earlier and cause a reprogramming of the
broadcast device. But that does not guarantee that the events of the
CPUs which were already in idle are delivered on time.
Fix this by arming the newly installed device for an immediate event
which will reevaluate the per CPU expiry times and reprogram the
broadcast device accordingly. This is simpler than caching the last
expiry time in yet another place or saving it before the device exchange
and handing it down to the setup function. Replacement of broadcast
devices is not a frequent operation and usually happens once somewhere
late in the boot process.
Fixes: 9c336c9935
("tick/broadcast: Allow late registered device to enter oneshot mode")
Reported-by: Victor Hassan <victor@allwinnertech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/87pm7d2z1i.ffs@tglx
1215 lines
33 KiB
C
1215 lines
33 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* This file contains functions which emulate a local clock-event
|
|
* device via a broadcast event source.
|
|
*
|
|
* Copyright(C) 2005-2006, Thomas Gleixner <tglx@linutronix.de>
|
|
* Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar
|
|
* Copyright(C) 2006-2007, Timesys Corp., Thomas Gleixner
|
|
*/
|
|
#include <linux/cpu.h>
|
|
#include <linux/err.h>
|
|
#include <linux/hrtimer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/percpu.h>
|
|
#include <linux/profile.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/module.h>
|
|
|
|
#include "tick-internal.h"
|
|
|
|
/*
|
|
* Broadcast support for broken x86 hardware, where the local apic
|
|
* timer stops in C3 state.
|
|
*/
|
|
|
|
static struct tick_device tick_broadcast_device;
|
|
static cpumask_var_t tick_broadcast_mask __cpumask_var_read_mostly;
|
|
static cpumask_var_t tick_broadcast_on __cpumask_var_read_mostly;
|
|
static cpumask_var_t tmpmask __cpumask_var_read_mostly;
|
|
static int tick_broadcast_forced;
|
|
|
|
static __cacheline_aligned_in_smp DEFINE_RAW_SPINLOCK(tick_broadcast_lock);
|
|
|
|
#ifdef CONFIG_TICK_ONESHOT
|
|
static DEFINE_PER_CPU(struct clock_event_device *, tick_oneshot_wakeup_device);
|
|
|
|
static void tick_broadcast_setup_oneshot(struct clock_event_device *bc, bool from_periodic);
|
|
static void tick_broadcast_clear_oneshot(int cpu);
|
|
static void tick_resume_broadcast_oneshot(struct clock_event_device *bc);
|
|
# ifdef CONFIG_HOTPLUG_CPU
|
|
static void tick_broadcast_oneshot_offline(unsigned int cpu);
|
|
# endif
|
|
#else
|
|
static inline void
|
|
tick_broadcast_setup_oneshot(struct clock_event_device *bc, bool from_periodic) { BUG(); }
|
|
static inline void tick_broadcast_clear_oneshot(int cpu) { }
|
|
static inline void tick_resume_broadcast_oneshot(struct clock_event_device *bc) { }
|
|
# ifdef CONFIG_HOTPLUG_CPU
|
|
static inline void tick_broadcast_oneshot_offline(unsigned int cpu) { }
|
|
# endif
|
|
#endif
|
|
|
|
/*
|
|
* Debugging: see timer_list.c
|
|
*/
|
|
struct tick_device *tick_get_broadcast_device(void)
|
|
{
|
|
return &tick_broadcast_device;
|
|
}
|
|
|
|
struct cpumask *tick_get_broadcast_mask(void)
|
|
{
|
|
return tick_broadcast_mask;
|
|
}
|
|
|
|
static struct clock_event_device *tick_get_oneshot_wakeup_device(int cpu);
|
|
|
|
const struct clock_event_device *tick_get_wakeup_device(int cpu)
|
|
{
|
|
return tick_get_oneshot_wakeup_device(cpu);
|
|
}
|
|
|
|
/*
|
|
* Start the device in periodic mode
|
|
*/
|
|
static void tick_broadcast_start_periodic(struct clock_event_device *bc)
|
|
{
|
|
if (bc)
|
|
tick_setup_periodic(bc, 1);
|
|
}
|
|
|
|
/*
|
|
* Check, if the device can be utilized as broadcast device:
|
|
*/
|
|
static bool tick_check_broadcast_device(struct clock_event_device *curdev,
|
|
struct clock_event_device *newdev)
|
|
{
|
|
if ((newdev->features & CLOCK_EVT_FEAT_DUMMY) ||
|
|
(newdev->features & CLOCK_EVT_FEAT_PERCPU) ||
|
|
(newdev->features & CLOCK_EVT_FEAT_C3STOP))
|
|
return false;
|
|
|
|
if (tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT &&
|
|
!(newdev->features & CLOCK_EVT_FEAT_ONESHOT))
|
|
return false;
|
|
|
|
return !curdev || newdev->rating > curdev->rating;
|
|
}
|
|
|
|
#ifdef CONFIG_TICK_ONESHOT
|
|
static struct clock_event_device *tick_get_oneshot_wakeup_device(int cpu)
|
|
{
|
|
return per_cpu(tick_oneshot_wakeup_device, cpu);
|
|
}
|
|
|
|
static void tick_oneshot_wakeup_handler(struct clock_event_device *wd)
|
|
{
|
|
/*
|
|
* If we woke up early and the tick was reprogrammed in the
|
|
* meantime then this may be spurious but harmless.
|
|
*/
|
|
tick_receive_broadcast();
|
|
}
|
|
|
|
static bool tick_set_oneshot_wakeup_device(struct clock_event_device *newdev,
|
|
int cpu)
|
|
{
|
|
struct clock_event_device *curdev = tick_get_oneshot_wakeup_device(cpu);
|
|
|
|
if (!newdev)
|
|
goto set_device;
|
|
|
|
if ((newdev->features & CLOCK_EVT_FEAT_DUMMY) ||
|
|
(newdev->features & CLOCK_EVT_FEAT_C3STOP))
|
|
return false;
|
|
|
|
if (!(newdev->features & CLOCK_EVT_FEAT_PERCPU) ||
|
|
!(newdev->features & CLOCK_EVT_FEAT_ONESHOT))
|
|
return false;
|
|
|
|
if (!cpumask_equal(newdev->cpumask, cpumask_of(cpu)))
|
|
return false;
|
|
|
|
if (curdev && newdev->rating <= curdev->rating)
|
|
return false;
|
|
|
|
if (!try_module_get(newdev->owner))
|
|
return false;
|
|
|
|
newdev->event_handler = tick_oneshot_wakeup_handler;
|
|
set_device:
|
|
clockevents_exchange_device(curdev, newdev);
|
|
per_cpu(tick_oneshot_wakeup_device, cpu) = newdev;
|
|
return true;
|
|
}
|
|
#else
|
|
static struct clock_event_device *tick_get_oneshot_wakeup_device(int cpu)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static bool tick_set_oneshot_wakeup_device(struct clock_event_device *newdev,
|
|
int cpu)
|
|
{
|
|
return false;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Conditionally install/replace broadcast device
|
|
*/
|
|
void tick_install_broadcast_device(struct clock_event_device *dev, int cpu)
|
|
{
|
|
struct clock_event_device *cur = tick_broadcast_device.evtdev;
|
|
|
|
if (tick_set_oneshot_wakeup_device(dev, cpu))
|
|
return;
|
|
|
|
if (!tick_check_broadcast_device(cur, dev))
|
|
return;
|
|
|
|
if (!try_module_get(dev->owner))
|
|
return;
|
|
|
|
clockevents_exchange_device(cur, dev);
|
|
if (cur)
|
|
cur->event_handler = clockevents_handle_noop;
|
|
tick_broadcast_device.evtdev = dev;
|
|
if (!cpumask_empty(tick_broadcast_mask))
|
|
tick_broadcast_start_periodic(dev);
|
|
|
|
if (!(dev->features & CLOCK_EVT_FEAT_ONESHOT))
|
|
return;
|
|
|
|
/*
|
|
* If the system already runs in oneshot mode, switch the newly
|
|
* registered broadcast device to oneshot mode explicitly.
|
|
*/
|
|
if (tick_broadcast_oneshot_active()) {
|
|
tick_broadcast_switch_to_oneshot();
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Inform all cpus about this. We might be in a situation
|
|
* where we did not switch to oneshot mode because the per cpu
|
|
* devices are affected by CLOCK_EVT_FEAT_C3STOP and the lack
|
|
* of a oneshot capable broadcast device. Without that
|
|
* notification the systems stays stuck in periodic mode
|
|
* forever.
|
|
*/
|
|
tick_clock_notify();
|
|
}
|
|
|
|
/*
|
|
* Check, if the device is the broadcast device
|
|
*/
|
|
int tick_is_broadcast_device(struct clock_event_device *dev)
|
|
{
|
|
return (dev && tick_broadcast_device.evtdev == dev);
|
|
}
|
|
|
|
int tick_broadcast_update_freq(struct clock_event_device *dev, u32 freq)
|
|
{
|
|
int ret = -ENODEV;
|
|
|
|
if (tick_is_broadcast_device(dev)) {
|
|
raw_spin_lock(&tick_broadcast_lock);
|
|
ret = __clockevents_update_freq(dev, freq);
|
|
raw_spin_unlock(&tick_broadcast_lock);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
static void err_broadcast(const struct cpumask *mask)
|
|
{
|
|
pr_crit_once("Failed to broadcast timer tick. Some CPUs may be unresponsive.\n");
|
|
}
|
|
|
|
static void tick_device_setup_broadcast_func(struct clock_event_device *dev)
|
|
{
|
|
if (!dev->broadcast)
|
|
dev->broadcast = tick_broadcast;
|
|
if (!dev->broadcast) {
|
|
pr_warn_once("%s depends on broadcast, but no broadcast function available\n",
|
|
dev->name);
|
|
dev->broadcast = err_broadcast;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check, if the device is dysfunctional and a placeholder, which
|
|
* needs to be handled by the broadcast device.
|
|
*/
|
|
int tick_device_uses_broadcast(struct clock_event_device *dev, int cpu)
|
|
{
|
|
struct clock_event_device *bc = tick_broadcast_device.evtdev;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
raw_spin_lock_irqsave(&tick_broadcast_lock, flags);
|
|
|
|
/*
|
|
* Devices might be registered with both periodic and oneshot
|
|
* mode disabled. This signals, that the device needs to be
|
|
* operated from the broadcast device and is a placeholder for
|
|
* the cpu local device.
|
|
*/
|
|
if (!tick_device_is_functional(dev)) {
|
|
dev->event_handler = tick_handle_periodic;
|
|
tick_device_setup_broadcast_func(dev);
|
|
cpumask_set_cpu(cpu, tick_broadcast_mask);
|
|
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
|
|
tick_broadcast_start_periodic(bc);
|
|
else
|
|
tick_broadcast_setup_oneshot(bc, false);
|
|
ret = 1;
|
|
} else {
|
|
/*
|
|
* Clear the broadcast bit for this cpu if the
|
|
* device is not power state affected.
|
|
*/
|
|
if (!(dev->features & CLOCK_EVT_FEAT_C3STOP))
|
|
cpumask_clear_cpu(cpu, tick_broadcast_mask);
|
|
else
|
|
tick_device_setup_broadcast_func(dev);
|
|
|
|
/*
|
|
* Clear the broadcast bit if the CPU is not in
|
|
* periodic broadcast on state.
|
|
*/
|
|
if (!cpumask_test_cpu(cpu, tick_broadcast_on))
|
|
cpumask_clear_cpu(cpu, tick_broadcast_mask);
|
|
|
|
switch (tick_broadcast_device.mode) {
|
|
case TICKDEV_MODE_ONESHOT:
|
|
/*
|
|
* If the system is in oneshot mode we can
|
|
* unconditionally clear the oneshot mask bit,
|
|
* because the CPU is running and therefore
|
|
* not in an idle state which causes the power
|
|
* state affected device to stop. Let the
|
|
* caller initialize the device.
|
|
*/
|
|
tick_broadcast_clear_oneshot(cpu);
|
|
ret = 0;
|
|
break;
|
|
|
|
case TICKDEV_MODE_PERIODIC:
|
|
/*
|
|
* If the system is in periodic mode, check
|
|
* whether the broadcast device can be
|
|
* switched off now.
|
|
*/
|
|
if (cpumask_empty(tick_broadcast_mask) && bc)
|
|
clockevents_shutdown(bc);
|
|
/*
|
|
* If we kept the cpu in the broadcast mask,
|
|
* tell the caller to leave the per cpu device
|
|
* in shutdown state. The periodic interrupt
|
|
* is delivered by the broadcast device, if
|
|
* the broadcast device exists and is not
|
|
* hrtimer based.
|
|
*/
|
|
if (bc && !(bc->features & CLOCK_EVT_FEAT_HRTIMER))
|
|
ret = cpumask_test_cpu(cpu, tick_broadcast_mask);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
int tick_receive_broadcast(void)
|
|
{
|
|
struct tick_device *td = this_cpu_ptr(&tick_cpu_device);
|
|
struct clock_event_device *evt = td->evtdev;
|
|
|
|
if (!evt)
|
|
return -ENODEV;
|
|
|
|
if (!evt->event_handler)
|
|
return -EINVAL;
|
|
|
|
evt->event_handler(evt);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Broadcast the event to the cpus, which are set in the mask (mangled).
|
|
*/
|
|
static bool tick_do_broadcast(struct cpumask *mask)
|
|
{
|
|
int cpu = smp_processor_id();
|
|
struct tick_device *td;
|
|
bool local = false;
|
|
|
|
/*
|
|
* Check, if the current cpu is in the mask
|
|
*/
|
|
if (cpumask_test_cpu(cpu, mask)) {
|
|
struct clock_event_device *bc = tick_broadcast_device.evtdev;
|
|
|
|
cpumask_clear_cpu(cpu, mask);
|
|
/*
|
|
* We only run the local handler, if the broadcast
|
|
* device is not hrtimer based. Otherwise we run into
|
|
* a hrtimer recursion.
|
|
*
|
|
* local timer_interrupt()
|
|
* local_handler()
|
|
* expire_hrtimers()
|
|
* bc_handler()
|
|
* local_handler()
|
|
* expire_hrtimers()
|
|
*/
|
|
local = !(bc->features & CLOCK_EVT_FEAT_HRTIMER);
|
|
}
|
|
|
|
if (!cpumask_empty(mask)) {
|
|
/*
|
|
* It might be necessary to actually check whether the devices
|
|
* have different broadcast functions. For now, just use the
|
|
* one of the first device. This works as long as we have this
|
|
* misfeature only on x86 (lapic)
|
|
*/
|
|
td = &per_cpu(tick_cpu_device, cpumask_first(mask));
|
|
td->evtdev->broadcast(mask);
|
|
}
|
|
return local;
|
|
}
|
|
|
|
/*
|
|
* Periodic broadcast:
|
|
* - invoke the broadcast handlers
|
|
*/
|
|
static bool tick_do_periodic_broadcast(void)
|
|
{
|
|
cpumask_and(tmpmask, cpu_online_mask, tick_broadcast_mask);
|
|
return tick_do_broadcast(tmpmask);
|
|
}
|
|
|
|
/*
|
|
* Event handler for periodic broadcast ticks
|
|
*/
|
|
static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
|
|
{
|
|
struct tick_device *td = this_cpu_ptr(&tick_cpu_device);
|
|
bool bc_local;
|
|
|
|
raw_spin_lock(&tick_broadcast_lock);
|
|
|
|
/* Handle spurious interrupts gracefully */
|
|
if (clockevent_state_shutdown(tick_broadcast_device.evtdev)) {
|
|
raw_spin_unlock(&tick_broadcast_lock);
|
|
return;
|
|
}
|
|
|
|
bc_local = tick_do_periodic_broadcast();
|
|
|
|
if (clockevent_state_oneshot(dev)) {
|
|
ktime_t next = ktime_add_ns(dev->next_event, TICK_NSEC);
|
|
|
|
clockevents_program_event(dev, next, true);
|
|
}
|
|
raw_spin_unlock(&tick_broadcast_lock);
|
|
|
|
/*
|
|
* We run the handler of the local cpu after dropping
|
|
* tick_broadcast_lock because the handler might deadlock when
|
|
* trying to switch to oneshot mode.
|
|
*/
|
|
if (bc_local)
|
|
td->evtdev->event_handler(td->evtdev);
|
|
}
|
|
|
|
/**
|
|
* tick_broadcast_control - Enable/disable or force broadcast mode
|
|
* @mode: The selected broadcast mode
|
|
*
|
|
* Called when the system enters a state where affected tick devices
|
|
* might stop. Note: TICK_BROADCAST_FORCE cannot be undone.
|
|
*/
|
|
void tick_broadcast_control(enum tick_broadcast_mode mode)
|
|
{
|
|
struct clock_event_device *bc, *dev;
|
|
struct tick_device *td;
|
|
int cpu, bc_stopped;
|
|
unsigned long flags;
|
|
|
|
/* Protects also the local clockevent device. */
|
|
raw_spin_lock_irqsave(&tick_broadcast_lock, flags);
|
|
td = this_cpu_ptr(&tick_cpu_device);
|
|
dev = td->evtdev;
|
|
|
|
/*
|
|
* Is the device not affected by the powerstate ?
|
|
*/
|
|
if (!dev || !(dev->features & CLOCK_EVT_FEAT_C3STOP))
|
|
goto out;
|
|
|
|
if (!tick_device_is_functional(dev))
|
|
goto out;
|
|
|
|
cpu = smp_processor_id();
|
|
bc = tick_broadcast_device.evtdev;
|
|
bc_stopped = cpumask_empty(tick_broadcast_mask);
|
|
|
|
switch (mode) {
|
|
case TICK_BROADCAST_FORCE:
|
|
tick_broadcast_forced = 1;
|
|
fallthrough;
|
|
case TICK_BROADCAST_ON:
|
|
cpumask_set_cpu(cpu, tick_broadcast_on);
|
|
if (!cpumask_test_and_set_cpu(cpu, tick_broadcast_mask)) {
|
|
/*
|
|
* Only shutdown the cpu local device, if:
|
|
*
|
|
* - the broadcast device exists
|
|
* - the broadcast device is not a hrtimer based one
|
|
* - the broadcast device is in periodic mode to
|
|
* avoid a hiccup during switch to oneshot mode
|
|
*/
|
|
if (bc && !(bc->features & CLOCK_EVT_FEAT_HRTIMER) &&
|
|
tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
|
|
clockevents_shutdown(dev);
|
|
}
|
|
break;
|
|
|
|
case TICK_BROADCAST_OFF:
|
|
if (tick_broadcast_forced)
|
|
break;
|
|
cpumask_clear_cpu(cpu, tick_broadcast_on);
|
|
if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_mask)) {
|
|
if (tick_broadcast_device.mode ==
|
|
TICKDEV_MODE_PERIODIC)
|
|
tick_setup_periodic(dev, 0);
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (bc) {
|
|
if (cpumask_empty(tick_broadcast_mask)) {
|
|
if (!bc_stopped)
|
|
clockevents_shutdown(bc);
|
|
} else if (bc_stopped) {
|
|
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
|
|
tick_broadcast_start_periodic(bc);
|
|
else
|
|
tick_broadcast_setup_oneshot(bc, false);
|
|
}
|
|
}
|
|
out:
|
|
raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags);
|
|
}
|
|
EXPORT_SYMBOL_GPL(tick_broadcast_control);
|
|
|
|
/*
|
|
* Set the periodic handler depending on broadcast on/off
|
|
*/
|
|
void tick_set_periodic_handler(struct clock_event_device *dev, int broadcast)
|
|
{
|
|
if (!broadcast)
|
|
dev->event_handler = tick_handle_periodic;
|
|
else
|
|
dev->event_handler = tick_handle_periodic_broadcast;
|
|
}
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
static void tick_shutdown_broadcast(void)
|
|
{
|
|
struct clock_event_device *bc = tick_broadcast_device.evtdev;
|
|
|
|
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) {
|
|
if (bc && cpumask_empty(tick_broadcast_mask))
|
|
clockevents_shutdown(bc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Remove a CPU from broadcasting
|
|
*/
|
|
void tick_broadcast_offline(unsigned int cpu)
|
|
{
|
|
raw_spin_lock(&tick_broadcast_lock);
|
|
cpumask_clear_cpu(cpu, tick_broadcast_mask);
|
|
cpumask_clear_cpu(cpu, tick_broadcast_on);
|
|
tick_broadcast_oneshot_offline(cpu);
|
|
tick_shutdown_broadcast();
|
|
raw_spin_unlock(&tick_broadcast_lock);
|
|
}
|
|
|
|
#endif
|
|
|
|
void tick_suspend_broadcast(void)
|
|
{
|
|
struct clock_event_device *bc;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&tick_broadcast_lock, flags);
|
|
|
|
bc = tick_broadcast_device.evtdev;
|
|
if (bc)
|
|
clockevents_shutdown(bc);
|
|
|
|
raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* This is called from tick_resume_local() on a resuming CPU. That's
|
|
* called from the core resume function, tick_unfreeze() and the magic XEN
|
|
* resume hackery.
|
|
*
|
|
* In none of these cases the broadcast device mode can change and the
|
|
* bit of the resuming CPU in the broadcast mask is safe as well.
|
|
*/
|
|
bool tick_resume_check_broadcast(void)
|
|
{
|
|
if (tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT)
|
|
return false;
|
|
else
|
|
return cpumask_test_cpu(smp_processor_id(), tick_broadcast_mask);
|
|
}
|
|
|
|
void tick_resume_broadcast(void)
|
|
{
|
|
struct clock_event_device *bc;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&tick_broadcast_lock, flags);
|
|
|
|
bc = tick_broadcast_device.evtdev;
|
|
|
|
if (bc) {
|
|
clockevents_tick_resume(bc);
|
|
|
|
switch (tick_broadcast_device.mode) {
|
|
case TICKDEV_MODE_PERIODIC:
|
|
if (!cpumask_empty(tick_broadcast_mask))
|
|
tick_broadcast_start_periodic(bc);
|
|
break;
|
|
case TICKDEV_MODE_ONESHOT:
|
|
if (!cpumask_empty(tick_broadcast_mask))
|
|
tick_resume_broadcast_oneshot(bc);
|
|
break;
|
|
}
|
|
}
|
|
raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags);
|
|
}
|
|
|
|
#ifdef CONFIG_TICK_ONESHOT
|
|
|
|
static cpumask_var_t tick_broadcast_oneshot_mask __cpumask_var_read_mostly;
|
|
static cpumask_var_t tick_broadcast_pending_mask __cpumask_var_read_mostly;
|
|
static cpumask_var_t tick_broadcast_force_mask __cpumask_var_read_mostly;
|
|
|
|
/*
|
|
* Exposed for debugging: see timer_list.c
|
|
*/
|
|
struct cpumask *tick_get_broadcast_oneshot_mask(void)
|
|
{
|
|
return tick_broadcast_oneshot_mask;
|
|
}
|
|
|
|
/*
|
|
* Called before going idle with interrupts disabled. Checks whether a
|
|
* broadcast event from the other core is about to happen. We detected
|
|
* that in tick_broadcast_oneshot_control(). The callsite can use this
|
|
* to avoid a deep idle transition as we are about to get the
|
|
* broadcast IPI right away.
|
|
*/
|
|
noinstr int tick_check_broadcast_expired(void)
|
|
{
|
|
#ifdef _ASM_GENERIC_BITOPS_INSTRUMENTED_NON_ATOMIC_H
|
|
return arch_test_bit(smp_processor_id(), cpumask_bits(tick_broadcast_force_mask));
|
|
#else
|
|
return cpumask_test_cpu(smp_processor_id(), tick_broadcast_force_mask);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Set broadcast interrupt affinity
|
|
*/
|
|
static void tick_broadcast_set_affinity(struct clock_event_device *bc,
|
|
const struct cpumask *cpumask)
|
|
{
|
|
if (!(bc->features & CLOCK_EVT_FEAT_DYNIRQ))
|
|
return;
|
|
|
|
if (cpumask_equal(bc->cpumask, cpumask))
|
|
return;
|
|
|
|
bc->cpumask = cpumask;
|
|
irq_set_affinity(bc->irq, bc->cpumask);
|
|
}
|
|
|
|
static void tick_broadcast_set_event(struct clock_event_device *bc, int cpu,
|
|
ktime_t expires)
|
|
{
|
|
if (!clockevent_state_oneshot(bc))
|
|
clockevents_switch_state(bc, CLOCK_EVT_STATE_ONESHOT);
|
|
|
|
clockevents_program_event(bc, expires, 1);
|
|
tick_broadcast_set_affinity(bc, cpumask_of(cpu));
|
|
}
|
|
|
|
static void tick_resume_broadcast_oneshot(struct clock_event_device *bc)
|
|
{
|
|
clockevents_switch_state(bc, CLOCK_EVT_STATE_ONESHOT);
|
|
}
|
|
|
|
/*
|
|
* Called from irq_enter() when idle was interrupted to reenable the
|
|
* per cpu device.
|
|
*/
|
|
void tick_check_oneshot_broadcast_this_cpu(void)
|
|
{
|
|
if (cpumask_test_cpu(smp_processor_id(), tick_broadcast_oneshot_mask)) {
|
|
struct tick_device *td = this_cpu_ptr(&tick_cpu_device);
|
|
|
|
/*
|
|
* We might be in the middle of switching over from
|
|
* periodic to oneshot. If the CPU has not yet
|
|
* switched over, leave the device alone.
|
|
*/
|
|
if (td->mode == TICKDEV_MODE_ONESHOT) {
|
|
clockevents_switch_state(td->evtdev,
|
|
CLOCK_EVT_STATE_ONESHOT);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle oneshot mode broadcasting
|
|
*/
|
|
static void tick_handle_oneshot_broadcast(struct clock_event_device *dev)
|
|
{
|
|
struct tick_device *td;
|
|
ktime_t now, next_event;
|
|
int cpu, next_cpu = 0;
|
|
bool bc_local;
|
|
|
|
raw_spin_lock(&tick_broadcast_lock);
|
|
dev->next_event = KTIME_MAX;
|
|
next_event = KTIME_MAX;
|
|
cpumask_clear(tmpmask);
|
|
now = ktime_get();
|
|
/* Find all expired events */
|
|
for_each_cpu(cpu, tick_broadcast_oneshot_mask) {
|
|
/*
|
|
* Required for !SMP because for_each_cpu() reports
|
|
* unconditionally CPU0 as set on UP kernels.
|
|
*/
|
|
if (!IS_ENABLED(CONFIG_SMP) &&
|
|
cpumask_empty(tick_broadcast_oneshot_mask))
|
|
break;
|
|
|
|
td = &per_cpu(tick_cpu_device, cpu);
|
|
if (td->evtdev->next_event <= now) {
|
|
cpumask_set_cpu(cpu, tmpmask);
|
|
/*
|
|
* Mark the remote cpu in the pending mask, so
|
|
* it can avoid reprogramming the cpu local
|
|
* timer in tick_broadcast_oneshot_control().
|
|
*/
|
|
cpumask_set_cpu(cpu, tick_broadcast_pending_mask);
|
|
} else if (td->evtdev->next_event < next_event) {
|
|
next_event = td->evtdev->next_event;
|
|
next_cpu = cpu;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Remove the current cpu from the pending mask. The event is
|
|
* delivered immediately in tick_do_broadcast() !
|
|
*/
|
|
cpumask_clear_cpu(smp_processor_id(), tick_broadcast_pending_mask);
|
|
|
|
/* Take care of enforced broadcast requests */
|
|
cpumask_or(tmpmask, tmpmask, tick_broadcast_force_mask);
|
|
cpumask_clear(tick_broadcast_force_mask);
|
|
|
|
/*
|
|
* Sanity check. Catch the case where we try to broadcast to
|
|
* offline cpus.
|
|
*/
|
|
if (WARN_ON_ONCE(!cpumask_subset(tmpmask, cpu_online_mask)))
|
|
cpumask_and(tmpmask, tmpmask, cpu_online_mask);
|
|
|
|
/*
|
|
* Wakeup the cpus which have an expired event.
|
|
*/
|
|
bc_local = tick_do_broadcast(tmpmask);
|
|
|
|
/*
|
|
* Two reasons for reprogram:
|
|
*
|
|
* - The global event did not expire any CPU local
|
|
* events. This happens in dyntick mode, as the maximum PIT
|
|
* delta is quite small.
|
|
*
|
|
* - There are pending events on sleeping CPUs which were not
|
|
* in the event mask
|
|
*/
|
|
if (next_event != KTIME_MAX)
|
|
tick_broadcast_set_event(dev, next_cpu, next_event);
|
|
|
|
raw_spin_unlock(&tick_broadcast_lock);
|
|
|
|
if (bc_local) {
|
|
td = this_cpu_ptr(&tick_cpu_device);
|
|
td->evtdev->event_handler(td->evtdev);
|
|
}
|
|
}
|
|
|
|
static int broadcast_needs_cpu(struct clock_event_device *bc, int cpu)
|
|
{
|
|
if (!(bc->features & CLOCK_EVT_FEAT_HRTIMER))
|
|
return 0;
|
|
if (bc->next_event == KTIME_MAX)
|
|
return 0;
|
|
return bc->bound_on == cpu ? -EBUSY : 0;
|
|
}
|
|
|
|
static void broadcast_shutdown_local(struct clock_event_device *bc,
|
|
struct clock_event_device *dev)
|
|
{
|
|
/*
|
|
* For hrtimer based broadcasting we cannot shutdown the cpu
|
|
* local device if our own event is the first one to expire or
|
|
* if we own the broadcast timer.
|
|
*/
|
|
if (bc->features & CLOCK_EVT_FEAT_HRTIMER) {
|
|
if (broadcast_needs_cpu(bc, smp_processor_id()))
|
|
return;
|
|
if (dev->next_event < bc->next_event)
|
|
return;
|
|
}
|
|
clockevents_switch_state(dev, CLOCK_EVT_STATE_SHUTDOWN);
|
|
}
|
|
|
|
static int ___tick_broadcast_oneshot_control(enum tick_broadcast_state state,
|
|
struct tick_device *td,
|
|
int cpu)
|
|
{
|
|
struct clock_event_device *bc, *dev = td->evtdev;
|
|
int ret = 0;
|
|
ktime_t now;
|
|
|
|
raw_spin_lock(&tick_broadcast_lock);
|
|
bc = tick_broadcast_device.evtdev;
|
|
|
|
if (state == TICK_BROADCAST_ENTER) {
|
|
/*
|
|
* If the current CPU owns the hrtimer broadcast
|
|
* mechanism, it cannot go deep idle and we do not add
|
|
* the CPU to the broadcast mask. We don't have to go
|
|
* through the EXIT path as the local timer is not
|
|
* shutdown.
|
|
*/
|
|
ret = broadcast_needs_cpu(bc, cpu);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/*
|
|
* If the broadcast device is in periodic mode, we
|
|
* return.
|
|
*/
|
|
if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC) {
|
|
/* If it is a hrtimer based broadcast, return busy */
|
|
if (bc->features & CLOCK_EVT_FEAT_HRTIMER)
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
if (!cpumask_test_and_set_cpu(cpu, tick_broadcast_oneshot_mask)) {
|
|
WARN_ON_ONCE(cpumask_test_cpu(cpu, tick_broadcast_pending_mask));
|
|
|
|
/* Conditionally shut down the local timer. */
|
|
broadcast_shutdown_local(bc, dev);
|
|
|
|
/*
|
|
* We only reprogram the broadcast timer if we
|
|
* did not mark ourself in the force mask and
|
|
* if the cpu local event is earlier than the
|
|
* broadcast event. If the current CPU is in
|
|
* the force mask, then we are going to be
|
|
* woken by the IPI right away; we return
|
|
* busy, so the CPU does not try to go deep
|
|
* idle.
|
|
*/
|
|
if (cpumask_test_cpu(cpu, tick_broadcast_force_mask)) {
|
|
ret = -EBUSY;
|
|
} else if (dev->next_event < bc->next_event) {
|
|
tick_broadcast_set_event(bc, cpu, dev->next_event);
|
|
/*
|
|
* In case of hrtimer broadcasts the
|
|
* programming might have moved the
|
|
* timer to this cpu. If yes, remove
|
|
* us from the broadcast mask and
|
|
* return busy.
|
|
*/
|
|
ret = broadcast_needs_cpu(bc, cpu);
|
|
if (ret) {
|
|
cpumask_clear_cpu(cpu,
|
|
tick_broadcast_oneshot_mask);
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_oneshot_mask)) {
|
|
clockevents_switch_state(dev, CLOCK_EVT_STATE_ONESHOT);
|
|
/*
|
|
* The cpu which was handling the broadcast
|
|
* timer marked this cpu in the broadcast
|
|
* pending mask and fired the broadcast
|
|
* IPI. So we are going to handle the expired
|
|
* event anyway via the broadcast IPI
|
|
* handler. No need to reprogram the timer
|
|
* with an already expired event.
|
|
*/
|
|
if (cpumask_test_and_clear_cpu(cpu,
|
|
tick_broadcast_pending_mask))
|
|
goto out;
|
|
|
|
/*
|
|
* Bail out if there is no next event.
|
|
*/
|
|
if (dev->next_event == KTIME_MAX)
|
|
goto out;
|
|
/*
|
|
* If the pending bit is not set, then we are
|
|
* either the CPU handling the broadcast
|
|
* interrupt or we got woken by something else.
|
|
*
|
|
* We are no longer in the broadcast mask, so
|
|
* if the cpu local expiry time is already
|
|
* reached, we would reprogram the cpu local
|
|
* timer with an already expired event.
|
|
*
|
|
* This can lead to a ping-pong when we return
|
|
* to idle and therefore rearm the broadcast
|
|
* timer before the cpu local timer was able
|
|
* to fire. This happens because the forced
|
|
* reprogramming makes sure that the event
|
|
* will happen in the future and depending on
|
|
* the min_delta setting this might be far
|
|
* enough out that the ping-pong starts.
|
|
*
|
|
* If the cpu local next_event has expired
|
|
* then we know that the broadcast timer
|
|
* next_event has expired as well and
|
|
* broadcast is about to be handled. So we
|
|
* avoid reprogramming and enforce that the
|
|
* broadcast handler, which did not run yet,
|
|
* will invoke the cpu local handler.
|
|
*
|
|
* We cannot call the handler directly from
|
|
* here, because we might be in a NOHZ phase
|
|
* and we did not go through the irq_enter()
|
|
* nohz fixups.
|
|
*/
|
|
now = ktime_get();
|
|
if (dev->next_event <= now) {
|
|
cpumask_set_cpu(cpu, tick_broadcast_force_mask);
|
|
goto out;
|
|
}
|
|
/*
|
|
* We got woken by something else. Reprogram
|
|
* the cpu local timer device.
|
|
*/
|
|
tick_program_event(dev->next_event, 1);
|
|
}
|
|
}
|
|
out:
|
|
raw_spin_unlock(&tick_broadcast_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int tick_oneshot_wakeup_control(enum tick_broadcast_state state,
|
|
struct tick_device *td,
|
|
int cpu)
|
|
{
|
|
struct clock_event_device *dev, *wd;
|
|
|
|
dev = td->evtdev;
|
|
if (td->mode != TICKDEV_MODE_ONESHOT)
|
|
return -EINVAL;
|
|
|
|
wd = tick_get_oneshot_wakeup_device(cpu);
|
|
if (!wd)
|
|
return -ENODEV;
|
|
|
|
switch (state) {
|
|
case TICK_BROADCAST_ENTER:
|
|
clockevents_switch_state(dev, CLOCK_EVT_STATE_ONESHOT_STOPPED);
|
|
clockevents_switch_state(wd, CLOCK_EVT_STATE_ONESHOT);
|
|
clockevents_program_event(wd, dev->next_event, 1);
|
|
break;
|
|
case TICK_BROADCAST_EXIT:
|
|
/* We may have transitioned to oneshot mode while idle */
|
|
if (clockevent_get_state(wd) != CLOCK_EVT_STATE_ONESHOT)
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int __tick_broadcast_oneshot_control(enum tick_broadcast_state state)
|
|
{
|
|
struct tick_device *td = this_cpu_ptr(&tick_cpu_device);
|
|
int cpu = smp_processor_id();
|
|
|
|
if (!tick_oneshot_wakeup_control(state, td, cpu))
|
|
return 0;
|
|
|
|
if (tick_broadcast_device.evtdev)
|
|
return ___tick_broadcast_oneshot_control(state, td, cpu);
|
|
|
|
/*
|
|
* If there is no broadcast or wakeup device, tell the caller not
|
|
* to go into deep idle.
|
|
*/
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Reset the one shot broadcast for a cpu
|
|
*
|
|
* Called with tick_broadcast_lock held
|
|
*/
|
|
static void tick_broadcast_clear_oneshot(int cpu)
|
|
{
|
|
cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask);
|
|
cpumask_clear_cpu(cpu, tick_broadcast_pending_mask);
|
|
}
|
|
|
|
static void tick_broadcast_init_next_event(struct cpumask *mask,
|
|
ktime_t expires)
|
|
{
|
|
struct tick_device *td;
|
|
int cpu;
|
|
|
|
for_each_cpu(cpu, mask) {
|
|
td = &per_cpu(tick_cpu_device, cpu);
|
|
if (td->evtdev)
|
|
td->evtdev->next_event = expires;
|
|
}
|
|
}
|
|
|
|
static inline ktime_t tick_get_next_period(void)
|
|
{
|
|
ktime_t next;
|
|
|
|
/*
|
|
* Protect against concurrent updates (store /load tearing on
|
|
* 32bit). It does not matter if the time is already in the
|
|
* past. The broadcast device which is about to be programmed will
|
|
* fire in any case.
|
|
*/
|
|
raw_spin_lock(&jiffies_lock);
|
|
next = tick_next_period;
|
|
raw_spin_unlock(&jiffies_lock);
|
|
return next;
|
|
}
|
|
|
|
/**
|
|
* tick_broadcast_setup_oneshot - setup the broadcast device
|
|
*/
|
|
static void tick_broadcast_setup_oneshot(struct clock_event_device *bc,
|
|
bool from_periodic)
|
|
{
|
|
int cpu = smp_processor_id();
|
|
ktime_t nexttick = 0;
|
|
|
|
if (!bc)
|
|
return;
|
|
|
|
/*
|
|
* When the broadcast device was switched to oneshot by the first
|
|
* CPU handling the NOHZ change, the other CPUs will reach this
|
|
* code via hrtimer_run_queues() -> tick_check_oneshot_change()
|
|
* too. Set up the broadcast device only once!
|
|
*/
|
|
if (bc->event_handler == tick_handle_oneshot_broadcast) {
|
|
/*
|
|
* The CPU which switched from periodic to oneshot mode
|
|
* set the broadcast oneshot bit for all other CPUs which
|
|
* are in the general (periodic) broadcast mask to ensure
|
|
* that CPUs which wait for the periodic broadcast are
|
|
* woken up.
|
|
*
|
|
* Clear the bit for the local CPU as the set bit would
|
|
* prevent the first tick_broadcast_enter() after this CPU
|
|
* switched to oneshot state to program the broadcast
|
|
* device.
|
|
*
|
|
* This code can also be reached via tick_broadcast_control(),
|
|
* but this cannot avoid the tick_broadcast_clear_oneshot()
|
|
* as that would break the periodic to oneshot transition of
|
|
* secondary CPUs. But that's harmless as the below only
|
|
* clears already cleared bits.
|
|
*/
|
|
tick_broadcast_clear_oneshot(cpu);
|
|
return;
|
|
}
|
|
|
|
|
|
bc->event_handler = tick_handle_oneshot_broadcast;
|
|
bc->next_event = KTIME_MAX;
|
|
|
|
/*
|
|
* When the tick mode is switched from periodic to oneshot it must
|
|
* be ensured that CPUs which are waiting for periodic broadcast
|
|
* get their wake-up at the next tick. This is achieved by ORing
|
|
* tick_broadcast_mask into tick_broadcast_oneshot_mask.
|
|
*
|
|
* For other callers, e.g. broadcast device replacement,
|
|
* tick_broadcast_oneshot_mask must not be touched as this would
|
|
* set bits for CPUs which are already NOHZ, but not idle. Their
|
|
* next tick_broadcast_enter() would observe the bit set and fail
|
|
* to update the expiry time and the broadcast event device.
|
|
*/
|
|
if (from_periodic) {
|
|
cpumask_copy(tmpmask, tick_broadcast_mask);
|
|
/* Remove the local CPU as it is obviously not idle */
|
|
cpumask_clear_cpu(cpu, tmpmask);
|
|
cpumask_or(tick_broadcast_oneshot_mask, tick_broadcast_oneshot_mask, tmpmask);
|
|
|
|
/*
|
|
* Ensure that the oneshot broadcast handler will wake the
|
|
* CPUs which are still waiting for periodic broadcast.
|
|
*/
|
|
nexttick = tick_get_next_period();
|
|
tick_broadcast_init_next_event(tmpmask, nexttick);
|
|
|
|
/*
|
|
* If the underlying broadcast clock event device is
|
|
* already in oneshot state, then there is nothing to do.
|
|
* The device was already armed for the next tick
|
|
* in tick_handle_broadcast_periodic()
|
|
*/
|
|
if (clockevent_state_oneshot(bc))
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* When switching from periodic to oneshot mode arm the broadcast
|
|
* device for the next tick.
|
|
*
|
|
* If the broadcast device has been replaced in oneshot mode and
|
|
* the oneshot broadcast mask is not empty, then arm it to expire
|
|
* immediately in order to reevaluate the next expiring timer.
|
|
* @nexttick is 0 and therefore in the past which will cause the
|
|
* clockevent code to force an event.
|
|
*
|
|
* For both cases the programming can be avoided when the oneshot
|
|
* broadcast mask is empty.
|
|
*
|
|
* tick_broadcast_set_event() implicitly switches the broadcast
|
|
* device to oneshot state.
|
|
*/
|
|
if (!cpumask_empty(tick_broadcast_oneshot_mask))
|
|
tick_broadcast_set_event(bc, cpu, nexttick);
|
|
}
|
|
|
|
/*
|
|
* Select oneshot operating mode for the broadcast device
|
|
*/
|
|
void tick_broadcast_switch_to_oneshot(void)
|
|
{
|
|
struct clock_event_device *bc;
|
|
enum tick_device_mode oldmode;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&tick_broadcast_lock, flags);
|
|
|
|
oldmode = tick_broadcast_device.mode;
|
|
tick_broadcast_device.mode = TICKDEV_MODE_ONESHOT;
|
|
bc = tick_broadcast_device.evtdev;
|
|
if (bc)
|
|
tick_broadcast_setup_oneshot(bc, oldmode == TICKDEV_MODE_PERIODIC);
|
|
|
|
raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags);
|
|
}
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
void hotplug_cpu__broadcast_tick_pull(int deadcpu)
|
|
{
|
|
struct clock_event_device *bc;
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&tick_broadcast_lock, flags);
|
|
bc = tick_broadcast_device.evtdev;
|
|
|
|
if (bc && broadcast_needs_cpu(bc, deadcpu)) {
|
|
/* This moves the broadcast assignment to this CPU: */
|
|
clockevents_program_event(bc, bc->next_event, 1);
|
|
}
|
|
raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Remove a dying CPU from broadcasting
|
|
*/
|
|
static void tick_broadcast_oneshot_offline(unsigned int cpu)
|
|
{
|
|
if (tick_get_oneshot_wakeup_device(cpu))
|
|
tick_set_oneshot_wakeup_device(NULL, cpu);
|
|
|
|
/*
|
|
* Clear the broadcast masks for the dead cpu, but do not stop
|
|
* the broadcast device!
|
|
*/
|
|
cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask);
|
|
cpumask_clear_cpu(cpu, tick_broadcast_pending_mask);
|
|
cpumask_clear_cpu(cpu, tick_broadcast_force_mask);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Check, whether the broadcast device is in one shot mode
|
|
*/
|
|
int tick_broadcast_oneshot_active(void)
|
|
{
|
|
return tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT;
|
|
}
|
|
|
|
/*
|
|
* Check whether the broadcast device supports oneshot.
|
|
*/
|
|
bool tick_broadcast_oneshot_available(void)
|
|
{
|
|
struct clock_event_device *bc = tick_broadcast_device.evtdev;
|
|
|
|
return bc ? bc->features & CLOCK_EVT_FEAT_ONESHOT : false;
|
|
}
|
|
|
|
#else
|
|
int __tick_broadcast_oneshot_control(enum tick_broadcast_state state)
|
|
{
|
|
struct clock_event_device *bc = tick_broadcast_device.evtdev;
|
|
|
|
if (!bc || (bc->features & CLOCK_EVT_FEAT_HRTIMER))
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void __init tick_broadcast_init(void)
|
|
{
|
|
zalloc_cpumask_var(&tick_broadcast_mask, GFP_NOWAIT);
|
|
zalloc_cpumask_var(&tick_broadcast_on, GFP_NOWAIT);
|
|
zalloc_cpumask_var(&tmpmask, GFP_NOWAIT);
|
|
#ifdef CONFIG_TICK_ONESHOT
|
|
zalloc_cpumask_var(&tick_broadcast_oneshot_mask, GFP_NOWAIT);
|
|
zalloc_cpumask_var(&tick_broadcast_pending_mask, GFP_NOWAIT);
|
|
zalloc_cpumask_var(&tick_broadcast_force_mask, GFP_NOWAIT);
|
|
#endif
|
|
}
|