mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Jani Nikula](/assets/img/avatar_default.png)
Panel power off delay is the time the panel power needs to remain off after being switched off, before it can be switched on again. For the purpose of respecting panel power off delay at driver probe, assuming the panel was last switched off at driver probe is overly pessimistic. If the panel was never on, we'd end up waiting for no reason. We don't know what has happened before kernel boot, but we can make some assumptions: - The panel may have been switched off right before kernel boot by some pre-os environment. - After kernel boot, the panel may only be switched off by i915. - At i915 driver probe, only a previously loaded and removed i915 may have switched the panel power off. With these assumptions, we can initialize the last power off time to kernel boot time, if we also ensure i915 driver remove waits for the panel power off delay after switching panel power off. This shaves off the time it takes from kernel boot to i915 probe from the first panel enable, if (and only if) the panel was not already enabled at boot. The encoder destroy hook is pretty much the last place where we can wait, right after we've ensured the panel power has been switched off, and before the whole encoder is destroyed. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7417 Cc: Lee Shawn C <shawn.c.lee@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Lee Shawn C <shawn.c.lee@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221116150657.1347504-1-jani.nikula@intel.com
5535 lines
159 KiB
C
5535 lines
159 KiB
C
/*
|
||
* Copyright © 2008 Intel Corporation
|
||
*
|
||
* Permission is hereby granted, free of charge, to any person obtaining a
|
||
* copy of this software and associated documentation files (the "Software"),
|
||
* to deal in the Software without restriction, including without limitation
|
||
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
||
* and/or sell copies of the Software, and to permit persons to whom the
|
||
* Software is furnished to do so, subject to the following conditions:
|
||
*
|
||
* The above copyright notice and this permission notice (including the next
|
||
* paragraph) shall be included in all copies or substantial portions of the
|
||
* Software.
|
||
*
|
||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
||
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
||
* IN THE SOFTWARE.
|
||
*
|
||
* Authors:
|
||
* Keith Packard <keithp@keithp.com>
|
||
*
|
||
*/
|
||
|
||
#include <linux/export.h>
|
||
#include <linux/i2c.h>
|
||
#include <linux/notifier.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/string_helpers.h>
|
||
#include <linux/timekeeping.h>
|
||
#include <linux/types.h>
|
||
|
||
#include <asm/byteorder.h>
|
||
|
||
#include <drm/display/drm_dp_helper.h>
|
||
#include <drm/display/drm_dsc_helper.h>
|
||
#include <drm/display/drm_hdmi_helper.h>
|
||
#include <drm/drm_atomic_helper.h>
|
||
#include <drm/drm_crtc.h>
|
||
#include <drm/drm_edid.h>
|
||
#include <drm/drm_probe_helper.h>
|
||
|
||
#include "g4x_dp.h"
|
||
#include "i915_debugfs.h"
|
||
#include "i915_drv.h"
|
||
#include "i915_reg.h"
|
||
#include "intel_atomic.h"
|
||
#include "intel_audio.h"
|
||
#include "intel_backlight.h"
|
||
#include "intel_combo_phy_regs.h"
|
||
#include "intel_connector.h"
|
||
#include "intel_crtc.h"
|
||
#include "intel_ddi.h"
|
||
#include "intel_de.h"
|
||
#include "intel_display_types.h"
|
||
#include "intel_dp.h"
|
||
#include "intel_dp_aux.h"
|
||
#include "intel_dp_hdcp.h"
|
||
#include "intel_dp_link_training.h"
|
||
#include "intel_dp_mst.h"
|
||
#include "intel_dpio_phy.h"
|
||
#include "intel_dpll.h"
|
||
#include "intel_fifo_underrun.h"
|
||
#include "intel_hdcp.h"
|
||
#include "intel_hdmi.h"
|
||
#include "intel_hotplug.h"
|
||
#include "intel_lspcon.h"
|
||
#include "intel_lvds.h"
|
||
#include "intel_panel.h"
|
||
#include "intel_pch_display.h"
|
||
#include "intel_pps.h"
|
||
#include "intel_psr.h"
|
||
#include "intel_tc.h"
|
||
#include "intel_vdsc.h"
|
||
#include "intel_vrr.h"
|
||
|
||
/* DP DSC throughput values used for slice count calculations KPixels/s */
|
||
#define DP_DSC_PEAK_PIXEL_RATE 2720000
|
||
#define DP_DSC_MAX_ENC_THROUGHPUT_0 340000
|
||
#define DP_DSC_MAX_ENC_THROUGHPUT_1 400000
|
||
|
||
/* DP DSC FEC Overhead factor = 1/(0.972261) */
|
||
#define DP_DSC_FEC_OVERHEAD_FACTOR 972261
|
||
|
||
/* Compliance test status bits */
|
||
#define INTEL_DP_RESOLUTION_SHIFT_MASK 0
|
||
#define INTEL_DP_RESOLUTION_PREFERRED (1 << INTEL_DP_RESOLUTION_SHIFT_MASK)
|
||
#define INTEL_DP_RESOLUTION_STANDARD (2 << INTEL_DP_RESOLUTION_SHIFT_MASK)
|
||
#define INTEL_DP_RESOLUTION_FAILSAFE (3 << INTEL_DP_RESOLUTION_SHIFT_MASK)
|
||
|
||
|
||
/* Constants for DP DSC configurations */
|
||
static const u8 valid_dsc_bpp[] = {6, 8, 10, 12, 15};
|
||
|
||
/* With Single pipe configuration, HW is capable of supporting maximum
|
||
* of 4 slices per line.
|
||
*/
|
||
static const u8 valid_dsc_slicecount[] = {1, 2, 4};
|
||
|
||
/**
|
||
* intel_dp_is_edp - is the given port attached to an eDP panel (either CPU or PCH)
|
||
* @intel_dp: DP struct
|
||
*
|
||
* If a CPU or PCH DP output is attached to an eDP panel, this function
|
||
* will return true, and false otherwise.
|
||
*
|
||
* This function is not safe to use prior to encoder type being set.
|
||
*/
|
||
bool intel_dp_is_edp(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
|
||
return dig_port->base.type == INTEL_OUTPUT_EDP;
|
||
}
|
||
|
||
static void intel_dp_unset_edid(struct intel_dp *intel_dp);
|
||
static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc);
|
||
|
||
/* Is link rate UHBR and thus 128b/132b? */
|
||
bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state)
|
||
{
|
||
return crtc_state->port_clock >= 1000000;
|
||
}
|
||
|
||
static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp)
|
||
{
|
||
intel_dp->sink_rates[0] = 162000;
|
||
intel_dp->num_sink_rates = 1;
|
||
}
|
||
|
||
/* update sink rates from dpcd */
|
||
static void intel_dp_set_dpcd_sink_rates(struct intel_dp *intel_dp)
|
||
{
|
||
static const int dp_rates[] = {
|
||
162000, 270000, 540000, 810000
|
||
};
|
||
int i, max_rate;
|
||
int max_lttpr_rate;
|
||
|
||
if (drm_dp_has_quirk(&intel_dp->desc, DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS)) {
|
||
/* Needed, e.g., for Apple MBP 2017, 15 inch eDP Retina panel */
|
||
static const int quirk_rates[] = { 162000, 270000, 324000 };
|
||
|
||
memcpy(intel_dp->sink_rates, quirk_rates, sizeof(quirk_rates));
|
||
intel_dp->num_sink_rates = ARRAY_SIZE(quirk_rates);
|
||
|
||
return;
|
||
}
|
||
|
||
/*
|
||
* Sink rates for 8b/10b.
|
||
*/
|
||
max_rate = drm_dp_bw_code_to_link_rate(intel_dp->dpcd[DP_MAX_LINK_RATE]);
|
||
max_lttpr_rate = drm_dp_lttpr_max_link_rate(intel_dp->lttpr_common_caps);
|
||
if (max_lttpr_rate)
|
||
max_rate = min(max_rate, max_lttpr_rate);
|
||
|
||
for (i = 0; i < ARRAY_SIZE(dp_rates); i++) {
|
||
if (dp_rates[i] > max_rate)
|
||
break;
|
||
intel_dp->sink_rates[i] = dp_rates[i];
|
||
}
|
||
|
||
/*
|
||
* Sink rates for 128b/132b. If set, sink should support all 8b/10b
|
||
* rates and 10 Gbps.
|
||
*/
|
||
if (intel_dp->dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_128B132B) {
|
||
u8 uhbr_rates = 0;
|
||
|
||
BUILD_BUG_ON(ARRAY_SIZE(intel_dp->sink_rates) < ARRAY_SIZE(dp_rates) + 3);
|
||
|
||
drm_dp_dpcd_readb(&intel_dp->aux,
|
||
DP_128B132B_SUPPORTED_LINK_RATES, &uhbr_rates);
|
||
|
||
if (drm_dp_lttpr_count(intel_dp->lttpr_common_caps)) {
|
||
/* We have a repeater */
|
||
if (intel_dp->lttpr_common_caps[0] >= 0x20 &&
|
||
intel_dp->lttpr_common_caps[DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER -
|
||
DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV] &
|
||
DP_PHY_REPEATER_128B132B_SUPPORTED) {
|
||
/* Repeater supports 128b/132b, valid UHBR rates */
|
||
uhbr_rates &= intel_dp->lttpr_common_caps[DP_PHY_REPEATER_128B132B_RATES -
|
||
DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV];
|
||
} else {
|
||
/* Does not support 128b/132b */
|
||
uhbr_rates = 0;
|
||
}
|
||
}
|
||
|
||
if (uhbr_rates & DP_UHBR10)
|
||
intel_dp->sink_rates[i++] = 1000000;
|
||
if (uhbr_rates & DP_UHBR13_5)
|
||
intel_dp->sink_rates[i++] = 1350000;
|
||
if (uhbr_rates & DP_UHBR20)
|
||
intel_dp->sink_rates[i++] = 2000000;
|
||
}
|
||
|
||
intel_dp->num_sink_rates = i;
|
||
}
|
||
|
||
static void intel_dp_set_sink_rates(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
|
||
struct intel_encoder *encoder = &intel_dig_port->base;
|
||
|
||
intel_dp_set_dpcd_sink_rates(intel_dp);
|
||
|
||
if (intel_dp->num_sink_rates)
|
||
return;
|
||
|
||
drm_err(&dp_to_i915(intel_dp)->drm,
|
||
"[CONNECTOR:%d:%s][ENCODER:%d:%s] Invalid DPCD with no link rates, using defaults\n",
|
||
connector->base.base.id, connector->base.name,
|
||
encoder->base.base.id, encoder->base.name);
|
||
|
||
intel_dp_set_default_sink_rates(intel_dp);
|
||
}
|
||
|
||
static void intel_dp_set_default_max_sink_lane_count(struct intel_dp *intel_dp)
|
||
{
|
||
intel_dp->max_sink_lane_count = 1;
|
||
}
|
||
|
||
static void intel_dp_set_max_sink_lane_count(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
|
||
struct intel_encoder *encoder = &intel_dig_port->base;
|
||
|
||
intel_dp->max_sink_lane_count = drm_dp_max_lane_count(intel_dp->dpcd);
|
||
|
||
switch (intel_dp->max_sink_lane_count) {
|
||
case 1:
|
||
case 2:
|
||
case 4:
|
||
return;
|
||
}
|
||
|
||
drm_err(&dp_to_i915(intel_dp)->drm,
|
||
"[CONNECTOR:%d:%s][ENCODER:%d:%s] Invalid DPCD max lane count (%d), using default\n",
|
||
connector->base.base.id, connector->base.name,
|
||
encoder->base.base.id, encoder->base.name,
|
||
intel_dp->max_sink_lane_count);
|
||
|
||
intel_dp_set_default_max_sink_lane_count(intel_dp);
|
||
}
|
||
|
||
/* Get length of rates array potentially limited by max_rate. */
|
||
static int intel_dp_rate_limit_len(const int *rates, int len, int max_rate)
|
||
{
|
||
int i;
|
||
|
||
/* Limit results by potentially reduced max rate */
|
||
for (i = 0; i < len; i++) {
|
||
if (rates[len - i - 1] <= max_rate)
|
||
return len - i;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* Get length of common rates array potentially limited by max_rate. */
|
||
static int intel_dp_common_len_rate_limit(const struct intel_dp *intel_dp,
|
||
int max_rate)
|
||
{
|
||
return intel_dp_rate_limit_len(intel_dp->common_rates,
|
||
intel_dp->num_common_rates, max_rate);
|
||
}
|
||
|
||
static int intel_dp_common_rate(struct intel_dp *intel_dp, int index)
|
||
{
|
||
if (drm_WARN_ON(&dp_to_i915(intel_dp)->drm,
|
||
index < 0 || index >= intel_dp->num_common_rates))
|
||
return 162000;
|
||
|
||
return intel_dp->common_rates[index];
|
||
}
|
||
|
||
/* Theoretical max between source and sink */
|
||
static int intel_dp_max_common_rate(struct intel_dp *intel_dp)
|
||
{
|
||
return intel_dp_common_rate(intel_dp, intel_dp->num_common_rates - 1);
|
||
}
|
||
|
||
static int intel_dp_max_source_lane_count(struct intel_digital_port *dig_port)
|
||
{
|
||
int vbt_max_lanes = intel_bios_dp_max_lane_count(&dig_port->base);
|
||
int max_lanes = dig_port->max_lanes;
|
||
|
||
if (vbt_max_lanes)
|
||
max_lanes = min(max_lanes, vbt_max_lanes);
|
||
|
||
return max_lanes;
|
||
}
|
||
|
||
/* Theoretical max between source and sink */
|
||
static int intel_dp_max_common_lane_count(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
int source_max = intel_dp_max_source_lane_count(dig_port);
|
||
int sink_max = intel_dp->max_sink_lane_count;
|
||
int fia_max = intel_tc_port_fia_max_lane_count(dig_port);
|
||
int lttpr_max = drm_dp_lttpr_max_lane_count(intel_dp->lttpr_common_caps);
|
||
|
||
if (lttpr_max)
|
||
sink_max = min(sink_max, lttpr_max);
|
||
|
||
return min3(source_max, sink_max, fia_max);
|
||
}
|
||
|
||
int intel_dp_max_lane_count(struct intel_dp *intel_dp)
|
||
{
|
||
switch (intel_dp->max_link_lane_count) {
|
||
case 1:
|
||
case 2:
|
||
case 4:
|
||
return intel_dp->max_link_lane_count;
|
||
default:
|
||
MISSING_CASE(intel_dp->max_link_lane_count);
|
||
return 1;
|
||
}
|
||
}
|
||
|
||
/*
|
||
* The required data bandwidth for a mode with given pixel clock and bpp. This
|
||
* is the required net bandwidth independent of the data bandwidth efficiency.
|
||
*/
|
||
int
|
||
intel_dp_link_required(int pixel_clock, int bpp)
|
||
{
|
||
/* pixel_clock is in kHz, divide bpp by 8 for bit to Byte conversion */
|
||
return DIV_ROUND_UP(pixel_clock * bpp, 8);
|
||
}
|
||
|
||
/*
|
||
* Given a link rate and lanes, get the data bandwidth.
|
||
*
|
||
* Data bandwidth is the actual payload rate, which depends on the data
|
||
* bandwidth efficiency and the link rate.
|
||
*
|
||
* For 8b/10b channel encoding, SST and non-FEC, the data bandwidth efficiency
|
||
* is 80%. For example, for a 1.62 Gbps link, 1.62*10^9 bps * 0.80 * (1/8) =
|
||
* 162000 kBps. With 8-bit symbols, we have 162000 kHz symbol clock. Just by
|
||
* coincidence, the port clock in kHz matches the data bandwidth in kBps, and
|
||
* they equal the link bit rate in Gbps multiplied by 100000. (Note that this no
|
||
* longer holds for data bandwidth as soon as FEC or MST is taken into account!)
|
||
*
|
||
* For 128b/132b channel encoding, the data bandwidth efficiency is 96.71%. For
|
||
* example, for a 10 Gbps link, 10*10^9 bps * 0.9671 * (1/8) = 1208875
|
||
* kBps. With 32-bit symbols, we have 312500 kHz symbol clock. The value 1000000
|
||
* does not match the symbol clock, the port clock (not even if you think in
|
||
* terms of a byte clock), nor the data bandwidth. It only matches the link bit
|
||
* rate in units of 10000 bps.
|
||
*/
|
||
int
|
||
intel_dp_max_data_rate(int max_link_rate, int max_lanes)
|
||
{
|
||
if (max_link_rate >= 1000000) {
|
||
/*
|
||
* UHBR rates always use 128b/132b channel encoding, and have
|
||
* 97.71% data bandwidth efficiency. Consider max_link_rate the
|
||
* link bit rate in units of 10000 bps.
|
||
*/
|
||
int max_link_rate_kbps = max_link_rate * 10;
|
||
|
||
max_link_rate_kbps = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(max_link_rate_kbps, 9671), 10000);
|
||
max_link_rate = max_link_rate_kbps / 8;
|
||
}
|
||
|
||
/*
|
||
* Lower than UHBR rates always use 8b/10b channel encoding, and have
|
||
* 80% data bandwidth efficiency for SST non-FEC. However, this turns
|
||
* out to be a nop by coincidence, and can be skipped:
|
||
*
|
||
* int max_link_rate_kbps = max_link_rate * 10;
|
||
* max_link_rate_kbps = DIV_ROUND_CLOSEST_ULL(max_link_rate_kbps * 8, 10);
|
||
* max_link_rate = max_link_rate_kbps / 8;
|
||
*/
|
||
|
||
return max_link_rate * max_lanes;
|
||
}
|
||
|
||
bool intel_dp_can_bigjoiner(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
|
||
struct intel_encoder *encoder = &intel_dig_port->base;
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
|
||
return DISPLAY_VER(dev_priv) >= 12 ||
|
||
(DISPLAY_VER(dev_priv) == 11 &&
|
||
encoder->port != PORT_A);
|
||
}
|
||
|
||
static int dg2_max_source_rate(struct intel_dp *intel_dp)
|
||
{
|
||
return intel_dp_is_edp(intel_dp) ? 810000 : 1350000;
|
||
}
|
||
|
||
static int icl_max_source_rate(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
|
||
enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
|
||
|
||
if (intel_phy_is_combo(dev_priv, phy) && !intel_dp_is_edp(intel_dp))
|
||
return 540000;
|
||
|
||
return 810000;
|
||
}
|
||
|
||
static int ehl_max_source_rate(struct intel_dp *intel_dp)
|
||
{
|
||
if (intel_dp_is_edp(intel_dp))
|
||
return 540000;
|
||
|
||
return 810000;
|
||
}
|
||
|
||
static int vbt_max_link_rate(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
|
||
int max_rate;
|
||
|
||
max_rate = intel_bios_dp_max_link_rate(encoder);
|
||
|
||
if (intel_dp_is_edp(intel_dp)) {
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
int edp_max_rate = connector->panel.vbt.edp.max_link_rate;
|
||
|
||
if (max_rate && edp_max_rate)
|
||
max_rate = min(max_rate, edp_max_rate);
|
||
else if (edp_max_rate)
|
||
max_rate = edp_max_rate;
|
||
}
|
||
|
||
return max_rate;
|
||
}
|
||
|
||
static void
|
||
intel_dp_set_source_rates(struct intel_dp *intel_dp)
|
||
{
|
||
/* The values must be in increasing order */
|
||
static const int icl_rates[] = {
|
||
162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000,
|
||
1000000, 1350000,
|
||
};
|
||
static const int bxt_rates[] = {
|
||
162000, 216000, 243000, 270000, 324000, 432000, 540000
|
||
};
|
||
static const int skl_rates[] = {
|
||
162000, 216000, 270000, 324000, 432000, 540000
|
||
};
|
||
static const int hsw_rates[] = {
|
||
162000, 270000, 540000
|
||
};
|
||
static const int g4x_rates[] = {
|
||
162000, 270000
|
||
};
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
|
||
const int *source_rates;
|
||
int size, max_rate = 0, vbt_max_rate;
|
||
|
||
/* This should only be done once */
|
||
drm_WARN_ON(&dev_priv->drm,
|
||
intel_dp->source_rates || intel_dp->num_source_rates);
|
||
|
||
if (DISPLAY_VER(dev_priv) >= 11) {
|
||
source_rates = icl_rates;
|
||
size = ARRAY_SIZE(icl_rates);
|
||
if (IS_DG2(dev_priv))
|
||
max_rate = dg2_max_source_rate(intel_dp);
|
||
else if (IS_ALDERLAKE_P(dev_priv) || IS_ALDERLAKE_S(dev_priv) ||
|
||
IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv))
|
||
max_rate = 810000;
|
||
else if (IS_JSL_EHL(dev_priv))
|
||
max_rate = ehl_max_source_rate(intel_dp);
|
||
else
|
||
max_rate = icl_max_source_rate(intel_dp);
|
||
} else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
|
||
source_rates = bxt_rates;
|
||
size = ARRAY_SIZE(bxt_rates);
|
||
} else if (DISPLAY_VER(dev_priv) == 9) {
|
||
source_rates = skl_rates;
|
||
size = ARRAY_SIZE(skl_rates);
|
||
} else if ((IS_HASWELL(dev_priv) && !IS_HSW_ULX(dev_priv)) ||
|
||
IS_BROADWELL(dev_priv)) {
|
||
source_rates = hsw_rates;
|
||
size = ARRAY_SIZE(hsw_rates);
|
||
} else {
|
||
source_rates = g4x_rates;
|
||
size = ARRAY_SIZE(g4x_rates);
|
||
}
|
||
|
||
vbt_max_rate = vbt_max_link_rate(intel_dp);
|
||
if (max_rate && vbt_max_rate)
|
||
max_rate = min(max_rate, vbt_max_rate);
|
||
else if (vbt_max_rate)
|
||
max_rate = vbt_max_rate;
|
||
|
||
if (max_rate)
|
||
size = intel_dp_rate_limit_len(source_rates, size, max_rate);
|
||
|
||
intel_dp->source_rates = source_rates;
|
||
intel_dp->num_source_rates = size;
|
||
}
|
||
|
||
static int intersect_rates(const int *source_rates, int source_len,
|
||
const int *sink_rates, int sink_len,
|
||
int *common_rates)
|
||
{
|
||
int i = 0, j = 0, k = 0;
|
||
|
||
while (i < source_len && j < sink_len) {
|
||
if (source_rates[i] == sink_rates[j]) {
|
||
if (WARN_ON(k >= DP_MAX_SUPPORTED_RATES))
|
||
return k;
|
||
common_rates[k] = source_rates[i];
|
||
++k;
|
||
++i;
|
||
++j;
|
||
} else if (source_rates[i] < sink_rates[j]) {
|
||
++i;
|
||
} else {
|
||
++j;
|
||
}
|
||
}
|
||
return k;
|
||
}
|
||
|
||
/* return index of rate in rates array, or -1 if not found */
|
||
static int intel_dp_rate_index(const int *rates, int len, int rate)
|
||
{
|
||
int i;
|
||
|
||
for (i = 0; i < len; i++)
|
||
if (rate == rates[i])
|
||
return i;
|
||
|
||
return -1;
|
||
}
|
||
|
||
static void intel_dp_set_common_rates(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
|
||
drm_WARN_ON(&i915->drm,
|
||
!intel_dp->num_source_rates || !intel_dp->num_sink_rates);
|
||
|
||
intel_dp->num_common_rates = intersect_rates(intel_dp->source_rates,
|
||
intel_dp->num_source_rates,
|
||
intel_dp->sink_rates,
|
||
intel_dp->num_sink_rates,
|
||
intel_dp->common_rates);
|
||
|
||
/* Paranoia, there should always be something in common. */
|
||
if (drm_WARN_ON(&i915->drm, intel_dp->num_common_rates == 0)) {
|
||
intel_dp->common_rates[0] = 162000;
|
||
intel_dp->num_common_rates = 1;
|
||
}
|
||
}
|
||
|
||
static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate,
|
||
u8 lane_count)
|
||
{
|
||
/*
|
||
* FIXME: we need to synchronize the current link parameters with
|
||
* hardware readout. Currently fast link training doesn't work on
|
||
* boot-up.
|
||
*/
|
||
if (link_rate == 0 ||
|
||
link_rate > intel_dp->max_link_rate)
|
||
return false;
|
||
|
||
if (lane_count == 0 ||
|
||
lane_count > intel_dp_max_lane_count(intel_dp))
|
||
return false;
|
||
|
||
return true;
|
||
}
|
||
|
||
static bool intel_dp_can_link_train_fallback_for_edp(struct intel_dp *intel_dp,
|
||
int link_rate,
|
||
u8 lane_count)
|
||
{
|
||
/* FIXME figure out what we actually want here */
|
||
const struct drm_display_mode *fixed_mode =
|
||
intel_panel_preferred_fixed_mode(intel_dp->attached_connector);
|
||
int mode_rate, max_rate;
|
||
|
||
mode_rate = intel_dp_link_required(fixed_mode->clock, 18);
|
||
max_rate = intel_dp_max_data_rate(link_rate, lane_count);
|
||
if (mode_rate > max_rate)
|
||
return false;
|
||
|
||
return true;
|
||
}
|
||
|
||
int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
|
||
int link_rate, u8 lane_count)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
int index;
|
||
|
||
/*
|
||
* TODO: Enable fallback on MST links once MST link compute can handle
|
||
* the fallback params.
|
||
*/
|
||
if (intel_dp->is_mst) {
|
||
drm_err(&i915->drm, "Link Training Unsuccessful\n");
|
||
return -1;
|
||
}
|
||
|
||
if (intel_dp_is_edp(intel_dp) && !intel_dp->use_max_params) {
|
||
drm_dbg_kms(&i915->drm,
|
||
"Retrying Link training for eDP with max parameters\n");
|
||
intel_dp->use_max_params = true;
|
||
return 0;
|
||
}
|
||
|
||
index = intel_dp_rate_index(intel_dp->common_rates,
|
||
intel_dp->num_common_rates,
|
||
link_rate);
|
||
if (index > 0) {
|
||
if (intel_dp_is_edp(intel_dp) &&
|
||
!intel_dp_can_link_train_fallback_for_edp(intel_dp,
|
||
intel_dp_common_rate(intel_dp, index - 1),
|
||
lane_count)) {
|
||
drm_dbg_kms(&i915->drm,
|
||
"Retrying Link training for eDP with same parameters\n");
|
||
return 0;
|
||
}
|
||
intel_dp->max_link_rate = intel_dp_common_rate(intel_dp, index - 1);
|
||
intel_dp->max_link_lane_count = lane_count;
|
||
} else if (lane_count > 1) {
|
||
if (intel_dp_is_edp(intel_dp) &&
|
||
!intel_dp_can_link_train_fallback_for_edp(intel_dp,
|
||
intel_dp_max_common_rate(intel_dp),
|
||
lane_count >> 1)) {
|
||
drm_dbg_kms(&i915->drm,
|
||
"Retrying Link training for eDP with same parameters\n");
|
||
return 0;
|
||
}
|
||
intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
|
||
intel_dp->max_link_lane_count = lane_count >> 1;
|
||
} else {
|
||
drm_err(&i915->drm, "Link Training Unsuccessful\n");
|
||
return -1;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
u32 intel_dp_mode_to_fec_clock(u32 mode_clock)
|
||
{
|
||
return div_u64(mul_u32_u32(mode_clock, 1000000U),
|
||
DP_DSC_FEC_OVERHEAD_FACTOR);
|
||
}
|
||
|
||
static int
|
||
small_joiner_ram_size_bits(struct drm_i915_private *i915)
|
||
{
|
||
if (DISPLAY_VER(i915) >= 13)
|
||
return 17280 * 8;
|
||
else if (DISPLAY_VER(i915) >= 11)
|
||
return 7680 * 8;
|
||
else
|
||
return 6144 * 8;
|
||
}
|
||
|
||
static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
|
||
u32 link_clock, u32 lane_count,
|
||
u32 mode_clock, u32 mode_hdisplay,
|
||
bool bigjoiner,
|
||
u32 pipe_bpp)
|
||
{
|
||
u32 bits_per_pixel, max_bpp_small_joiner_ram;
|
||
int i;
|
||
|
||
/*
|
||
* Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)*
|
||
* (LinkSymbolClock)* 8 * (TimeSlotsPerMTP)
|
||
* for SST -> TimeSlotsPerMTP is 1,
|
||
* for MST -> TimeSlotsPerMTP has to be calculated
|
||
*/
|
||
bits_per_pixel = (link_clock * lane_count * 8) /
|
||
intel_dp_mode_to_fec_clock(mode_clock);
|
||
|
||
/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
|
||
max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) /
|
||
mode_hdisplay;
|
||
|
||
if (bigjoiner)
|
||
max_bpp_small_joiner_ram *= 2;
|
||
|
||
/*
|
||
* Greatest allowed DSC BPP = MIN (output BPP from available Link BW
|
||
* check, output bpp from small joiner RAM check)
|
||
*/
|
||
bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram);
|
||
|
||
if (bigjoiner) {
|
||
u32 max_bpp_bigjoiner =
|
||
i915->display.cdclk.max_cdclk_freq * 48 /
|
||
intel_dp_mode_to_fec_clock(mode_clock);
|
||
|
||
bits_per_pixel = min(bits_per_pixel, max_bpp_bigjoiner);
|
||
}
|
||
|
||
/* Error out if the max bpp is less than smallest allowed valid bpp */
|
||
if (bits_per_pixel < valid_dsc_bpp[0]) {
|
||
drm_dbg_kms(&i915->drm, "Unsupported BPP %u, min %u\n",
|
||
bits_per_pixel, valid_dsc_bpp[0]);
|
||
return 0;
|
||
}
|
||
|
||
/* From XE_LPD onwards we support from bpc upto uncompressed bpp-1 BPPs */
|
||
if (DISPLAY_VER(i915) >= 13) {
|
||
bits_per_pixel = min(bits_per_pixel, pipe_bpp - 1);
|
||
} else {
|
||
/* Find the nearest match in the array of known BPPs from VESA */
|
||
for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) {
|
||
if (bits_per_pixel < valid_dsc_bpp[i + 1])
|
||
break;
|
||
}
|
||
bits_per_pixel = valid_dsc_bpp[i];
|
||
}
|
||
|
||
/*
|
||
* Compressed BPP in U6.4 format so multiply by 16, for Gen 11,
|
||
* fractional part is 0
|
||
*/
|
||
return bits_per_pixel << 4;
|
||
}
|
||
|
||
static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
|
||
int mode_clock, int mode_hdisplay,
|
||
bool bigjoiner)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
u8 min_slice_count, i;
|
||
int max_slice_width;
|
||
|
||
if (mode_clock <= DP_DSC_PEAK_PIXEL_RATE)
|
||
min_slice_count = DIV_ROUND_UP(mode_clock,
|
||
DP_DSC_MAX_ENC_THROUGHPUT_0);
|
||
else
|
||
min_slice_count = DIV_ROUND_UP(mode_clock,
|
||
DP_DSC_MAX_ENC_THROUGHPUT_1);
|
||
|
||
max_slice_width = drm_dp_dsc_sink_max_slice_width(intel_dp->dsc_dpcd);
|
||
if (max_slice_width < DP_DSC_MIN_SLICE_WIDTH_VALUE) {
|
||
drm_dbg_kms(&i915->drm,
|
||
"Unsupported slice width %d by DP DSC Sink device\n",
|
||
max_slice_width);
|
||
return 0;
|
||
}
|
||
/* Also take into account max slice width */
|
||
min_slice_count = max_t(u8, min_slice_count,
|
||
DIV_ROUND_UP(mode_hdisplay,
|
||
max_slice_width));
|
||
|
||
/* Find the closest match to the valid slice count values */
|
||
for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
|
||
u8 test_slice_count = valid_dsc_slicecount[i] << bigjoiner;
|
||
|
||
if (test_slice_count >
|
||
drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, false))
|
||
break;
|
||
|
||
/* big joiner needs small joiner to be enabled */
|
||
if (bigjoiner && test_slice_count < 4)
|
||
continue;
|
||
|
||
if (min_slice_count <= test_slice_count)
|
||
return test_slice_count;
|
||
}
|
||
|
||
drm_dbg_kms(&i915->drm, "Unsupported Slice Count %d\n",
|
||
min_slice_count);
|
||
return 0;
|
||
}
|
||
|
||
static enum intel_output_format
|
||
intel_dp_output_format(struct intel_connector *connector,
|
||
bool ycbcr_420_output)
|
||
{
|
||
struct intel_dp *intel_dp = intel_attached_dp(connector);
|
||
|
||
if (!connector->base.ycbcr_420_allowed || !ycbcr_420_output)
|
||
return INTEL_OUTPUT_FORMAT_RGB;
|
||
|
||
if (intel_dp->dfp.rgb_to_ycbcr &&
|
||
intel_dp->dfp.ycbcr_444_to_420)
|
||
return INTEL_OUTPUT_FORMAT_RGB;
|
||
|
||
if (intel_dp->dfp.ycbcr_444_to_420)
|
||
return INTEL_OUTPUT_FORMAT_YCBCR444;
|
||
else
|
||
return INTEL_OUTPUT_FORMAT_YCBCR420;
|
||
}
|
||
|
||
int intel_dp_min_bpp(enum intel_output_format output_format)
|
||
{
|
||
if (output_format == INTEL_OUTPUT_FORMAT_RGB)
|
||
return 6 * 3;
|
||
else
|
||
return 8 * 3;
|
||
}
|
||
|
||
static int intel_dp_output_bpp(enum intel_output_format output_format, int bpp)
|
||
{
|
||
/*
|
||
* bpp value was assumed to RGB format. And YCbCr 4:2:0 output
|
||
* format of the number of bytes per pixel will be half the number
|
||
* of bytes of RGB pixel.
|
||
*/
|
||
if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
|
||
bpp /= 2;
|
||
|
||
return bpp;
|
||
}
|
||
|
||
static int
|
||
intel_dp_mode_min_output_bpp(struct intel_connector *connector,
|
||
const struct drm_display_mode *mode)
|
||
{
|
||
const struct drm_display_info *info = &connector->base.display_info;
|
||
enum intel_output_format output_format =
|
||
intel_dp_output_format(connector, drm_mode_is_420_only(info, mode));
|
||
|
||
return intel_dp_output_bpp(output_format, intel_dp_min_bpp(output_format));
|
||
}
|
||
|
||
static bool intel_dp_hdisplay_bad(struct drm_i915_private *dev_priv,
|
||
int hdisplay)
|
||
{
|
||
/*
|
||
* Older platforms don't like hdisplay==4096 with DP.
|
||
*
|
||
* On ILK/SNB/IVB the pipe seems to be somewhat running (scanline
|
||
* and frame counter increment), but we don't get vblank interrupts,
|
||
* and the pipe underruns immediately. The link also doesn't seem
|
||
* to get trained properly.
|
||
*
|
||
* On CHV the vblank interrupts don't seem to disappear but
|
||
* otherwise the symptoms are similar.
|
||
*
|
||
* TODO: confirm the behaviour on HSW+
|
||
*/
|
||
return hdisplay == 4096 && !HAS_DDI(dev_priv);
|
||
}
|
||
|
||
static int intel_dp_max_tmds_clock(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
const struct drm_display_info *info = &connector->base.display_info;
|
||
int max_tmds_clock = intel_dp->dfp.max_tmds_clock;
|
||
|
||
/* Only consider the sink's max TMDS clock if we know this is a HDMI DFP */
|
||
if (max_tmds_clock && info->max_tmds_clock)
|
||
max_tmds_clock = min(max_tmds_clock, info->max_tmds_clock);
|
||
|
||
return max_tmds_clock;
|
||
}
|
||
|
||
static enum drm_mode_status
|
||
intel_dp_tmds_clock_valid(struct intel_dp *intel_dp,
|
||
int clock, int bpc, bool ycbcr420_output,
|
||
bool respect_downstream_limits)
|
||
{
|
||
int tmds_clock, min_tmds_clock, max_tmds_clock;
|
||
|
||
if (!respect_downstream_limits)
|
||
return MODE_OK;
|
||
|
||
tmds_clock = intel_hdmi_tmds_clock(clock, bpc, ycbcr420_output);
|
||
|
||
min_tmds_clock = intel_dp->dfp.min_tmds_clock;
|
||
max_tmds_clock = intel_dp_max_tmds_clock(intel_dp);
|
||
|
||
if (min_tmds_clock && tmds_clock < min_tmds_clock)
|
||
return MODE_CLOCK_LOW;
|
||
|
||
if (max_tmds_clock && tmds_clock > max_tmds_clock)
|
||
return MODE_CLOCK_HIGH;
|
||
|
||
return MODE_OK;
|
||
}
|
||
|
||
static enum drm_mode_status
|
||
intel_dp_mode_valid_downstream(struct intel_connector *connector,
|
||
const struct drm_display_mode *mode,
|
||
int target_clock)
|
||
{
|
||
struct intel_dp *intel_dp = intel_attached_dp(connector);
|
||
const struct drm_display_info *info = &connector->base.display_info;
|
||
enum drm_mode_status status;
|
||
bool ycbcr_420_only;
|
||
|
||
/* If PCON supports FRL MODE, check FRL bandwidth constraints */
|
||
if (intel_dp->dfp.pcon_max_frl_bw) {
|
||
int target_bw;
|
||
int max_frl_bw;
|
||
int bpp = intel_dp_mode_min_output_bpp(connector, mode);
|
||
|
||
target_bw = bpp * target_clock;
|
||
|
||
max_frl_bw = intel_dp->dfp.pcon_max_frl_bw;
|
||
|
||
/* converting bw from Gbps to Kbps*/
|
||
max_frl_bw = max_frl_bw * 1000000;
|
||
|
||
if (target_bw > max_frl_bw)
|
||
return MODE_CLOCK_HIGH;
|
||
|
||
return MODE_OK;
|
||
}
|
||
|
||
if (intel_dp->dfp.max_dotclock &&
|
||
target_clock > intel_dp->dfp.max_dotclock)
|
||
return MODE_CLOCK_HIGH;
|
||
|
||
ycbcr_420_only = drm_mode_is_420_only(info, mode);
|
||
|
||
/* Assume 8bpc for the DP++/HDMI/DVI TMDS clock check */
|
||
status = intel_dp_tmds_clock_valid(intel_dp, target_clock,
|
||
8, ycbcr_420_only, true);
|
||
|
||
if (status != MODE_OK) {
|
||
if (ycbcr_420_only ||
|
||
!connector->base.ycbcr_420_allowed ||
|
||
!drm_mode_is_420_also(info, mode))
|
||
return status;
|
||
|
||
status = intel_dp_tmds_clock_valid(intel_dp, target_clock,
|
||
8, true, true);
|
||
if (status != MODE_OK)
|
||
return status;
|
||
}
|
||
|
||
return MODE_OK;
|
||
}
|
||
|
||
static bool intel_dp_need_bigjoiner(struct intel_dp *intel_dp,
|
||
int hdisplay, int clock)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
|
||
if (!intel_dp_can_bigjoiner(intel_dp))
|
||
return false;
|
||
|
||
return clock > i915->max_dotclk_freq || hdisplay > 5120;
|
||
}
|
||
|
||
static enum drm_mode_status
|
||
intel_dp_mode_valid(struct drm_connector *_connector,
|
||
struct drm_display_mode *mode)
|
||
{
|
||
struct intel_connector *connector = to_intel_connector(_connector);
|
||
struct intel_dp *intel_dp = intel_attached_dp(connector);
|
||
struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
|
||
const struct drm_display_mode *fixed_mode;
|
||
int target_clock = mode->clock;
|
||
int max_rate, mode_rate, max_lanes, max_link_clock;
|
||
int max_dotclk = dev_priv->max_dotclk_freq;
|
||
u16 dsc_max_output_bpp = 0;
|
||
u8 dsc_slice_count = 0;
|
||
enum drm_mode_status status;
|
||
bool dsc = false, bigjoiner = false;
|
||
|
||
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
|
||
return MODE_NO_DBLESCAN;
|
||
|
||
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
|
||
return MODE_H_ILLEGAL;
|
||
|
||
fixed_mode = intel_panel_fixed_mode(connector, mode);
|
||
if (intel_dp_is_edp(intel_dp) && fixed_mode) {
|
||
status = intel_panel_mode_valid(connector, mode);
|
||
if (status != MODE_OK)
|
||
return status;
|
||
|
||
target_clock = fixed_mode->clock;
|
||
}
|
||
|
||
if (mode->clock < 10000)
|
||
return MODE_CLOCK_LOW;
|
||
|
||
if (intel_dp_need_bigjoiner(intel_dp, mode->hdisplay, target_clock)) {
|
||
bigjoiner = true;
|
||
max_dotclk *= 2;
|
||
}
|
||
if (target_clock > max_dotclk)
|
||
return MODE_CLOCK_HIGH;
|
||
|
||
max_link_clock = intel_dp_max_link_rate(intel_dp);
|
||
max_lanes = intel_dp_max_lane_count(intel_dp);
|
||
|
||
max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
|
||
mode_rate = intel_dp_link_required(target_clock,
|
||
intel_dp_mode_min_output_bpp(connector, mode));
|
||
|
||
if (intel_dp_hdisplay_bad(dev_priv, mode->hdisplay))
|
||
return MODE_H_ILLEGAL;
|
||
|
||
/*
|
||
* Output bpp is stored in 6.4 format so right shift by 4 to get the
|
||
* integer value since we support only integer values of bpp.
|
||
*/
|
||
if (DISPLAY_VER(dev_priv) >= 10 &&
|
||
drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) {
|
||
/*
|
||
* TBD pass the connector BPC,
|
||
* for now U8_MAX so that max BPC on that platform would be picked
|
||
*/
|
||
int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX);
|
||
|
||
if (intel_dp_is_edp(intel_dp)) {
|
||
dsc_max_output_bpp =
|
||
drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4;
|
||
dsc_slice_count =
|
||
drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
|
||
true);
|
||
} else if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) {
|
||
dsc_max_output_bpp =
|
||
intel_dp_dsc_get_output_bpp(dev_priv,
|
||
max_link_clock,
|
||
max_lanes,
|
||
target_clock,
|
||
mode->hdisplay,
|
||
bigjoiner,
|
||
pipe_bpp) >> 4;
|
||
dsc_slice_count =
|
||
intel_dp_dsc_get_slice_count(intel_dp,
|
||
target_clock,
|
||
mode->hdisplay,
|
||
bigjoiner);
|
||
}
|
||
|
||
dsc = dsc_max_output_bpp && dsc_slice_count;
|
||
}
|
||
|
||
/*
|
||
* Big joiner configuration needs DSC for TGL which is not true for
|
||
* XE_LPD where uncompressed joiner is supported.
|
||
*/
|
||
if (DISPLAY_VER(dev_priv) < 13 && bigjoiner && !dsc)
|
||
return MODE_CLOCK_HIGH;
|
||
|
||
if (mode_rate > max_rate && !dsc)
|
||
return MODE_CLOCK_HIGH;
|
||
|
||
status = intel_dp_mode_valid_downstream(connector, mode, target_clock);
|
||
if (status != MODE_OK)
|
||
return status;
|
||
|
||
return intel_mode_valid_max_plane_size(dev_priv, mode, bigjoiner);
|
||
}
|
||
|
||
bool intel_dp_source_supports_tps3(struct drm_i915_private *i915)
|
||
{
|
||
return DISPLAY_VER(i915) >= 9 || IS_BROADWELL(i915) || IS_HASWELL(i915);
|
||
}
|
||
|
||
bool intel_dp_source_supports_tps4(struct drm_i915_private *i915)
|
||
{
|
||
return DISPLAY_VER(i915) >= 10;
|
||
}
|
||
|
||
static void snprintf_int_array(char *str, size_t len,
|
||
const int *array, int nelem)
|
||
{
|
||
int i;
|
||
|
||
str[0] = '\0';
|
||
|
||
for (i = 0; i < nelem; i++) {
|
||
int r = snprintf(str, len, "%s%d", i ? ", " : "", array[i]);
|
||
if (r >= len)
|
||
return;
|
||
str += r;
|
||
len -= r;
|
||
}
|
||
}
|
||
|
||
static void intel_dp_print_rates(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
char str[128]; /* FIXME: too big for stack? */
|
||
|
||
if (!drm_debug_enabled(DRM_UT_KMS))
|
||
return;
|
||
|
||
snprintf_int_array(str, sizeof(str),
|
||
intel_dp->source_rates, intel_dp->num_source_rates);
|
||
drm_dbg_kms(&i915->drm, "source rates: %s\n", str);
|
||
|
||
snprintf_int_array(str, sizeof(str),
|
||
intel_dp->sink_rates, intel_dp->num_sink_rates);
|
||
drm_dbg_kms(&i915->drm, "sink rates: %s\n", str);
|
||
|
||
snprintf_int_array(str, sizeof(str),
|
||
intel_dp->common_rates, intel_dp->num_common_rates);
|
||
drm_dbg_kms(&i915->drm, "common rates: %s\n", str);
|
||
}
|
||
|
||
int
|
||
intel_dp_max_link_rate(struct intel_dp *intel_dp)
|
||
{
|
||
int len;
|
||
|
||
len = intel_dp_common_len_rate_limit(intel_dp, intel_dp->max_link_rate);
|
||
|
||
return intel_dp_common_rate(intel_dp, len - 1);
|
||
}
|
||
|
||
int intel_dp_rate_select(struct intel_dp *intel_dp, int rate)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
int i = intel_dp_rate_index(intel_dp->sink_rates,
|
||
intel_dp->num_sink_rates, rate);
|
||
|
||
if (drm_WARN_ON(&i915->drm, i < 0))
|
||
i = 0;
|
||
|
||
return i;
|
||
}
|
||
|
||
void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock,
|
||
u8 *link_bw, u8 *rate_select)
|
||
{
|
||
/* eDP 1.4 rate select method. */
|
||
if (intel_dp->use_rate_select) {
|
||
*link_bw = 0;
|
||
*rate_select =
|
||
intel_dp_rate_select(intel_dp, port_clock);
|
||
} else {
|
||
*link_bw = drm_dp_link_rate_to_bw_code(port_clock);
|
||
*rate_select = 0;
|
||
}
|
||
}
|
||
|
||
static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *pipe_config)
|
||
{
|
||
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
|
||
|
||
/* On TGL, FEC is supported on all Pipes */
|
||
if (DISPLAY_VER(dev_priv) >= 12)
|
||
return true;
|
||
|
||
if (DISPLAY_VER(dev_priv) == 11 && pipe_config->cpu_transcoder != TRANSCODER_A)
|
||
return true;
|
||
|
||
return false;
|
||
}
|
||
|
||
static bool intel_dp_supports_fec(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *pipe_config)
|
||
{
|
||
return intel_dp_source_supports_fec(intel_dp, pipe_config) &&
|
||
drm_dp_sink_supports_fec(intel_dp->fec_capable);
|
||
}
|
||
|
||
static bool intel_dp_supports_dsc(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state)
|
||
{
|
||
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP) && !crtc_state->fec_enable)
|
||
return false;
|
||
|
||
return intel_dsc_source_support(crtc_state) &&
|
||
drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd);
|
||
}
|
||
|
||
static bool intel_dp_is_ycbcr420(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state)
|
||
{
|
||
return crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
|
||
(crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 &&
|
||
intel_dp->dfp.ycbcr_444_to_420);
|
||
}
|
||
|
||
static int intel_dp_hdmi_compute_bpc(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state,
|
||
int bpc, bool respect_downstream_limits)
|
||
{
|
||
bool ycbcr420_output = intel_dp_is_ycbcr420(intel_dp, crtc_state);
|
||
int clock = crtc_state->hw.adjusted_mode.crtc_clock;
|
||
|
||
/*
|
||
* Current bpc could already be below 8bpc due to
|
||
* FDI bandwidth constraints or other limits.
|
||
* HDMI minimum is 8bpc however.
|
||
*/
|
||
bpc = max(bpc, 8);
|
||
|
||
/*
|
||
* We will never exceed downstream TMDS clock limits while
|
||
* attempting deep color. If the user insists on forcing an
|
||
* out of spec mode they will have to be satisfied with 8bpc.
|
||
*/
|
||
if (!respect_downstream_limits)
|
||
bpc = 8;
|
||
|
||
for (; bpc >= 8; bpc -= 2) {
|
||
if (intel_hdmi_bpc_possible(crtc_state, bpc,
|
||
intel_dp->has_hdmi_sink, ycbcr420_output) &&
|
||
intel_dp_tmds_clock_valid(intel_dp, clock, bpc, ycbcr420_output,
|
||
respect_downstream_limits) == MODE_OK)
|
||
return bpc;
|
||
}
|
||
|
||
return -EINVAL;
|
||
}
|
||
|
||
static int intel_dp_max_bpp(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state,
|
||
bool respect_downstream_limits)
|
||
{
|
||
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
|
||
struct intel_connector *intel_connector = intel_dp->attached_connector;
|
||
int bpp, bpc;
|
||
|
||
bpc = crtc_state->pipe_bpp / 3;
|
||
|
||
if (intel_dp->dfp.max_bpc)
|
||
bpc = min_t(int, bpc, intel_dp->dfp.max_bpc);
|
||
|
||
if (intel_dp->dfp.min_tmds_clock) {
|
||
int max_hdmi_bpc;
|
||
|
||
max_hdmi_bpc = intel_dp_hdmi_compute_bpc(intel_dp, crtc_state, bpc,
|
||
respect_downstream_limits);
|
||
if (max_hdmi_bpc < 0)
|
||
return 0;
|
||
|
||
bpc = min(bpc, max_hdmi_bpc);
|
||
}
|
||
|
||
bpp = bpc * 3;
|
||
if (intel_dp_is_edp(intel_dp)) {
|
||
/* Get bpp from vbt only for panels that dont have bpp in edid */
|
||
if (intel_connector->base.display_info.bpc == 0 &&
|
||
intel_connector->panel.vbt.edp.bpp &&
|
||
intel_connector->panel.vbt.edp.bpp < bpp) {
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"clamping bpp for eDP panel to BIOS-provided %i\n",
|
||
intel_connector->panel.vbt.edp.bpp);
|
||
bpp = intel_connector->panel.vbt.edp.bpp;
|
||
}
|
||
}
|
||
|
||
return bpp;
|
||
}
|
||
|
||
/* Adjust link config limits based on compliance test requests. */
|
||
void
|
||
intel_dp_adjust_compliance_config(struct intel_dp *intel_dp,
|
||
struct intel_crtc_state *pipe_config,
|
||
struct link_config_limits *limits)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
|
||
/* For DP Compliance we override the computed bpp for the pipe */
|
||
if (intel_dp->compliance.test_data.bpc != 0) {
|
||
int bpp = 3 * intel_dp->compliance.test_data.bpc;
|
||
|
||
limits->min_bpp = limits->max_bpp = bpp;
|
||
pipe_config->dither_force_disable = bpp == 6 * 3;
|
||
|
||
drm_dbg_kms(&i915->drm, "Setting pipe_bpp to %d\n", bpp);
|
||
}
|
||
|
||
/* Use values requested by Compliance Test Request */
|
||
if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) {
|
||
int index;
|
||
|
||
/* Validate the compliance test data since max values
|
||
* might have changed due to link train fallback.
|
||
*/
|
||
if (intel_dp_link_params_valid(intel_dp, intel_dp->compliance.test_link_rate,
|
||
intel_dp->compliance.test_lane_count)) {
|
||
index = intel_dp_rate_index(intel_dp->common_rates,
|
||
intel_dp->num_common_rates,
|
||
intel_dp->compliance.test_link_rate);
|
||
if (index >= 0)
|
||
limits->min_rate = limits->max_rate =
|
||
intel_dp->compliance.test_link_rate;
|
||
limits->min_lane_count = limits->max_lane_count =
|
||
intel_dp->compliance.test_lane_count;
|
||
}
|
||
}
|
||
}
|
||
|
||
static bool has_seamless_m_n(struct intel_connector *connector)
|
||
{
|
||
struct drm_i915_private *i915 = to_i915(connector->base.dev);
|
||
|
||
/*
|
||
* Seamless M/N reprogramming only implemented
|
||
* for BDW+ double buffered M/N registers so far.
|
||
*/
|
||
return HAS_DOUBLE_BUFFERED_M_N(i915) &&
|
||
intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS;
|
||
}
|
||
|
||
static int intel_dp_mode_clock(const struct intel_crtc_state *crtc_state,
|
||
const struct drm_connector_state *conn_state)
|
||
{
|
||
struct intel_connector *connector = to_intel_connector(conn_state->connector);
|
||
const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
|
||
|
||
/* FIXME a bit of a mess wrt clock vs. crtc_clock */
|
||
if (has_seamless_m_n(connector))
|
||
return intel_panel_highest_mode(connector, adjusted_mode)->clock;
|
||
else
|
||
return adjusted_mode->crtc_clock;
|
||
}
|
||
|
||
/* Optimize link config in order: max bpp, min clock, min lanes */
|
||
static int
|
||
intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
|
||
struct intel_crtc_state *pipe_config,
|
||
const struct drm_connector_state *conn_state,
|
||
const struct link_config_limits *limits)
|
||
{
|
||
int bpp, i, lane_count, clock = intel_dp_mode_clock(pipe_config, conn_state);
|
||
int mode_rate, link_rate, link_avail;
|
||
|
||
for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) {
|
||
int output_bpp = intel_dp_output_bpp(pipe_config->output_format, bpp);
|
||
|
||
mode_rate = intel_dp_link_required(clock, output_bpp);
|
||
|
||
for (i = 0; i < intel_dp->num_common_rates; i++) {
|
||
link_rate = intel_dp_common_rate(intel_dp, i);
|
||
if (link_rate < limits->min_rate ||
|
||
link_rate > limits->max_rate)
|
||
continue;
|
||
|
||
for (lane_count = limits->min_lane_count;
|
||
lane_count <= limits->max_lane_count;
|
||
lane_count <<= 1) {
|
||
link_avail = intel_dp_max_data_rate(link_rate,
|
||
lane_count);
|
||
|
||
if (mode_rate <= link_avail) {
|
||
pipe_config->lane_count = lane_count;
|
||
pipe_config->pipe_bpp = bpp;
|
||
pipe_config->port_clock = link_rate;
|
||
|
||
return 0;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
return -EINVAL;
|
||
}
|
||
|
||
static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
int i, num_bpc;
|
||
u8 dsc_bpc[3] = {0};
|
||
u8 dsc_max_bpc;
|
||
|
||
/* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */
|
||
if (DISPLAY_VER(i915) >= 12)
|
||
dsc_max_bpc = min_t(u8, 12, max_req_bpc);
|
||
else
|
||
dsc_max_bpc = min_t(u8, 10, max_req_bpc);
|
||
|
||
num_bpc = drm_dp_dsc_sink_supported_input_bpcs(intel_dp->dsc_dpcd,
|
||
dsc_bpc);
|
||
for (i = 0; i < num_bpc; i++) {
|
||
if (dsc_max_bpc >= dsc_bpc[i])
|
||
return dsc_bpc[i] * 3;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int intel_dp_source_dsc_version_minor(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
|
||
return DISPLAY_VER(i915) >= 14 ? 2 : 1;
|
||
}
|
||
|
||
static int intel_dp_sink_dsc_version_minor(struct intel_dp *intel_dp)
|
||
{
|
||
return (intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] & DP_DSC_MINOR_MASK) >>
|
||
DP_DSC_MINOR_SHIFT;
|
||
}
|
||
|
||
static int intel_dp_dsc_compute_params(struct intel_encoder *encoder,
|
||
struct intel_crtc_state *crtc_state)
|
||
{
|
||
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
|
||
struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config;
|
||
u8 line_buf_depth;
|
||
int ret;
|
||
|
||
/*
|
||
* RC_MODEL_SIZE is currently a constant across all configurations.
|
||
*
|
||
* FIXME: Look into using sink defined DPCD DP_DSC_RC_BUF_BLK_SIZE and
|
||
* DP_DSC_RC_BUF_SIZE for this.
|
||
*/
|
||
vdsc_cfg->rc_model_size = DSC_RC_MODEL_SIZE_CONST;
|
||
vdsc_cfg->pic_height = crtc_state->hw.adjusted_mode.crtc_vdisplay;
|
||
|
||
/*
|
||
* Slice Height of 8 works for all currently available panels. So start
|
||
* with that if pic_height is an integral multiple of 8. Eventually add
|
||
* logic to try multiple slice heights.
|
||
*/
|
||
if (vdsc_cfg->pic_height % 8 == 0)
|
||
vdsc_cfg->slice_height = 8;
|
||
else if (vdsc_cfg->pic_height % 4 == 0)
|
||
vdsc_cfg->slice_height = 4;
|
||
else
|
||
vdsc_cfg->slice_height = 2;
|
||
|
||
ret = intel_dsc_compute_params(crtc_state);
|
||
if (ret)
|
||
return ret;
|
||
|
||
vdsc_cfg->dsc_version_major =
|
||
(intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
|
||
DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT;
|
||
vdsc_cfg->dsc_version_minor =
|
||
min(intel_dp_source_dsc_version_minor(intel_dp),
|
||
intel_dp_sink_dsc_version_minor(intel_dp));
|
||
|
||
vdsc_cfg->convert_rgb = intel_dp->dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT] &
|
||
DP_DSC_RGB;
|
||
|
||
line_buf_depth = drm_dp_dsc_sink_line_buf_depth(intel_dp->dsc_dpcd);
|
||
if (!line_buf_depth) {
|
||
drm_dbg_kms(&i915->drm,
|
||
"DSC Sink Line Buffer Depth invalid\n");
|
||
return -EINVAL;
|
||
}
|
||
|
||
if (vdsc_cfg->dsc_version_minor == 2)
|
||
vdsc_cfg->line_buf_depth = (line_buf_depth == DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ?
|
||
DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth;
|
||
else
|
||
vdsc_cfg->line_buf_depth = (line_buf_depth > DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ?
|
||
DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth;
|
||
|
||
vdsc_cfg->block_pred_enable =
|
||
intel_dp->dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] &
|
||
DP_DSC_BLK_PREDICTION_IS_SUPPORTED;
|
||
|
||
return drm_dsc_compute_rc_parameters(vdsc_cfg);
|
||
}
|
||
|
||
static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
|
||
struct intel_crtc_state *pipe_config,
|
||
struct drm_connector_state *conn_state,
|
||
struct link_config_limits *limits)
|
||
{
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
|
||
const struct drm_display_mode *adjusted_mode =
|
||
&pipe_config->hw.adjusted_mode;
|
||
int pipe_bpp;
|
||
int ret;
|
||
|
||
pipe_config->fec_enable = !intel_dp_is_edp(intel_dp) &&
|
||
intel_dp_supports_fec(intel_dp, pipe_config);
|
||
|
||
if (!intel_dp_supports_dsc(intel_dp, pipe_config))
|
||
return -EINVAL;
|
||
|
||
pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, conn_state->max_requested_bpc);
|
||
|
||
if (intel_dp->force_dsc_bpc) {
|
||
pipe_bpp = intel_dp->force_dsc_bpc * 3;
|
||
drm_dbg_kms(&dev_priv->drm, "Input DSC BPP forced to %d", pipe_bpp);
|
||
}
|
||
|
||
/* Min Input BPC for ICL+ is 8 */
|
||
if (pipe_bpp < 8 * 3) {
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"No DSC support for less than 8bpc\n");
|
||
return -EINVAL;
|
||
}
|
||
|
||
/*
|
||
* For now enable DSC for max bpp, max link rate, max lane count.
|
||
* Optimize this later for the minimum possible link rate/lane count
|
||
* with DSC enabled for the requested mode.
|
||
*/
|
||
pipe_config->pipe_bpp = pipe_bpp;
|
||
pipe_config->port_clock = limits->max_rate;
|
||
pipe_config->lane_count = limits->max_lane_count;
|
||
|
||
if (intel_dp_is_edp(intel_dp)) {
|
||
pipe_config->dsc.compressed_bpp =
|
||
min_t(u16, drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4,
|
||
pipe_config->pipe_bpp);
|
||
pipe_config->dsc.slice_count =
|
||
drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
|
||
true);
|
||
} else {
|
||
u16 dsc_max_output_bpp;
|
||
u8 dsc_dp_slice_count;
|
||
|
||
dsc_max_output_bpp =
|
||
intel_dp_dsc_get_output_bpp(dev_priv,
|
||
pipe_config->port_clock,
|
||
pipe_config->lane_count,
|
||
adjusted_mode->crtc_clock,
|
||
adjusted_mode->crtc_hdisplay,
|
||
pipe_config->bigjoiner_pipes,
|
||
pipe_bpp);
|
||
dsc_dp_slice_count =
|
||
intel_dp_dsc_get_slice_count(intel_dp,
|
||
adjusted_mode->crtc_clock,
|
||
adjusted_mode->crtc_hdisplay,
|
||
pipe_config->bigjoiner_pipes);
|
||
if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"Compressed BPP/Slice Count not supported\n");
|
||
return -EINVAL;
|
||
}
|
||
pipe_config->dsc.compressed_bpp = min_t(u16,
|
||
dsc_max_output_bpp >> 4,
|
||
pipe_config->pipe_bpp);
|
||
pipe_config->dsc.slice_count = dsc_dp_slice_count;
|
||
}
|
||
|
||
/*
|
||
* VDSC engine operates at 1 Pixel per clock, so if peak pixel rate
|
||
* is greater than the maximum Cdclock and if slice count is even
|
||
* then we need to use 2 VDSC instances.
|
||
*/
|
||
if (adjusted_mode->crtc_clock > dev_priv->display.cdclk.max_cdclk_freq ||
|
||
pipe_config->bigjoiner_pipes) {
|
||
if (pipe_config->dsc.slice_count < 2) {
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"Cannot split stream to use 2 VDSC instances\n");
|
||
return -EINVAL;
|
||
}
|
||
|
||
pipe_config->dsc.dsc_split = true;
|
||
}
|
||
|
||
ret = intel_dp_dsc_compute_params(&dig_port->base, pipe_config);
|
||
if (ret < 0) {
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"Cannot compute valid DSC parameters for Input Bpp = %d "
|
||
"Compressed BPP = %d\n",
|
||
pipe_config->pipe_bpp,
|
||
pipe_config->dsc.compressed_bpp);
|
||
return ret;
|
||
}
|
||
|
||
pipe_config->dsc.compression_enable = true;
|
||
drm_dbg_kms(&dev_priv->drm, "DP DSC computed with Input Bpp = %d "
|
||
"Compressed Bpp = %d Slice Count = %d\n",
|
||
pipe_config->pipe_bpp,
|
||
pipe_config->dsc.compressed_bpp,
|
||
pipe_config->dsc.slice_count);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int
|
||
intel_dp_compute_link_config(struct intel_encoder *encoder,
|
||
struct intel_crtc_state *pipe_config,
|
||
struct drm_connector_state *conn_state,
|
||
bool respect_downstream_limits)
|
||
{
|
||
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
|
||
struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
|
||
const struct drm_display_mode *adjusted_mode =
|
||
&pipe_config->hw.adjusted_mode;
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
|
||
struct link_config_limits limits;
|
||
bool joiner_needs_dsc = false;
|
||
int ret;
|
||
|
||
limits.min_rate = intel_dp_common_rate(intel_dp, 0);
|
||
limits.max_rate = intel_dp_max_link_rate(intel_dp);
|
||
|
||
limits.min_lane_count = 1;
|
||
limits.max_lane_count = intel_dp_max_lane_count(intel_dp);
|
||
|
||
limits.min_bpp = intel_dp_min_bpp(pipe_config->output_format);
|
||
limits.max_bpp = intel_dp_max_bpp(intel_dp, pipe_config, respect_downstream_limits);
|
||
|
||
if (intel_dp->use_max_params) {
|
||
/*
|
||
* Use the maximum clock and number of lanes the eDP panel
|
||
* advertizes being capable of in case the initial fast
|
||
* optimal params failed us. The panels are generally
|
||
* designed to support only a single clock and lane
|
||
* configuration, and typically on older panels these
|
||
* values correspond to the native resolution of the panel.
|
||
*/
|
||
limits.min_lane_count = limits.max_lane_count;
|
||
limits.min_rate = limits.max_rate;
|
||
}
|
||
|
||
intel_dp_adjust_compliance_config(intel_dp, pipe_config, &limits);
|
||
|
||
drm_dbg_kms(&i915->drm, "DP link computation with max lane count %i "
|
||
"max rate %d max bpp %d pixel clock %iKHz\n",
|
||
limits.max_lane_count, limits.max_rate,
|
||
limits.max_bpp, adjusted_mode->crtc_clock);
|
||
|
||
if (intel_dp_need_bigjoiner(intel_dp, adjusted_mode->crtc_hdisplay,
|
||
adjusted_mode->crtc_clock))
|
||
pipe_config->bigjoiner_pipes = GENMASK(crtc->pipe + 1, crtc->pipe);
|
||
|
||
/*
|
||
* Pipe joiner needs compression up to display 12 due to bandwidth
|
||
* limitation. DG2 onwards pipe joiner can be enabled without
|
||
* compression.
|
||
*/
|
||
joiner_needs_dsc = DISPLAY_VER(i915) < 13 && pipe_config->bigjoiner_pipes;
|
||
|
||
/*
|
||
* Optimize for slow and wide for everything, because there are some
|
||
* eDP 1.3 and 1.4 panels don't work well with fast and narrow.
|
||
*/
|
||
ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, conn_state, &limits);
|
||
|
||
if (ret || joiner_needs_dsc || intel_dp->force_dsc_en) {
|
||
drm_dbg_kms(&i915->drm, "Try DSC (fallback=%s, joiner=%s, force=%s)\n",
|
||
str_yes_no(ret), str_yes_no(joiner_needs_dsc),
|
||
str_yes_no(intel_dp->force_dsc_en));
|
||
ret = intel_dp_dsc_compute_config(intel_dp, pipe_config,
|
||
conn_state, &limits);
|
||
if (ret < 0)
|
||
return ret;
|
||
}
|
||
|
||
if (pipe_config->dsc.compression_enable) {
|
||
drm_dbg_kms(&i915->drm,
|
||
"DP lane count %d clock %d Input bpp %d Compressed bpp %d\n",
|
||
pipe_config->lane_count, pipe_config->port_clock,
|
||
pipe_config->pipe_bpp,
|
||
pipe_config->dsc.compressed_bpp);
|
||
|
||
drm_dbg_kms(&i915->drm,
|
||
"DP link rate required %i available %i\n",
|
||
intel_dp_link_required(adjusted_mode->crtc_clock,
|
||
pipe_config->dsc.compressed_bpp),
|
||
intel_dp_max_data_rate(pipe_config->port_clock,
|
||
pipe_config->lane_count));
|
||
} else {
|
||
drm_dbg_kms(&i915->drm, "DP lane count %d clock %d bpp %d\n",
|
||
pipe_config->lane_count, pipe_config->port_clock,
|
||
pipe_config->pipe_bpp);
|
||
|
||
drm_dbg_kms(&i915->drm,
|
||
"DP link rate required %i available %i\n",
|
||
intel_dp_link_required(adjusted_mode->crtc_clock,
|
||
pipe_config->pipe_bpp),
|
||
intel_dp_max_data_rate(pipe_config->port_clock,
|
||
pipe_config->lane_count));
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
bool intel_dp_limited_color_range(const struct intel_crtc_state *crtc_state,
|
||
const struct drm_connector_state *conn_state)
|
||
{
|
||
const struct intel_digital_connector_state *intel_conn_state =
|
||
to_intel_digital_connector_state(conn_state);
|
||
const struct drm_display_mode *adjusted_mode =
|
||
&crtc_state->hw.adjusted_mode;
|
||
|
||
/*
|
||
* Our YCbCr output is always limited range.
|
||
* crtc_state->limited_color_range only applies to RGB,
|
||
* and it must never be set for YCbCr or we risk setting
|
||
* some conflicting bits in PIPECONF which will mess up
|
||
* the colors on the monitor.
|
||
*/
|
||
if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB)
|
||
return false;
|
||
|
||
if (intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) {
|
||
/*
|
||
* See:
|
||
* CEA-861-E - 5.1 Default Encoding Parameters
|
||
* VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
|
||
*/
|
||
return crtc_state->pipe_bpp != 18 &&
|
||
drm_default_rgb_quant_range(adjusted_mode) ==
|
||
HDMI_QUANTIZATION_RANGE_LIMITED;
|
||
} else {
|
||
return intel_conn_state->broadcast_rgb ==
|
||
INTEL_BROADCAST_RGB_LIMITED;
|
||
}
|
||
}
|
||
|
||
static bool intel_dp_port_has_audio(struct drm_i915_private *dev_priv,
|
||
enum port port)
|
||
{
|
||
if (IS_G4X(dev_priv))
|
||
return false;
|
||
if (DISPLAY_VER(dev_priv) < 12 && port == PORT_A)
|
||
return false;
|
||
|
||
return true;
|
||
}
|
||
|
||
static void intel_dp_compute_vsc_colorimetry(const struct intel_crtc_state *crtc_state,
|
||
const struct drm_connector_state *conn_state,
|
||
struct drm_dp_vsc_sdp *vsc)
|
||
{
|
||
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
|
||
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
||
|
||
/*
|
||
* Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118
|
||
* VSC SDP supporting 3D stereo, PSR2, and Pixel Encoding/
|
||
* Colorimetry Format indication.
|
||
*/
|
||
vsc->revision = 0x5;
|
||
vsc->length = 0x13;
|
||
|
||
/* DP 1.4a spec, Table 2-120 */
|
||
switch (crtc_state->output_format) {
|
||
case INTEL_OUTPUT_FORMAT_YCBCR444:
|
||
vsc->pixelformat = DP_PIXELFORMAT_YUV444;
|
||
break;
|
||
case INTEL_OUTPUT_FORMAT_YCBCR420:
|
||
vsc->pixelformat = DP_PIXELFORMAT_YUV420;
|
||
break;
|
||
case INTEL_OUTPUT_FORMAT_RGB:
|
||
default:
|
||
vsc->pixelformat = DP_PIXELFORMAT_RGB;
|
||
}
|
||
|
||
switch (conn_state->colorspace) {
|
||
case DRM_MODE_COLORIMETRY_BT709_YCC:
|
||
vsc->colorimetry = DP_COLORIMETRY_BT709_YCC;
|
||
break;
|
||
case DRM_MODE_COLORIMETRY_XVYCC_601:
|
||
vsc->colorimetry = DP_COLORIMETRY_XVYCC_601;
|
||
break;
|
||
case DRM_MODE_COLORIMETRY_XVYCC_709:
|
||
vsc->colorimetry = DP_COLORIMETRY_XVYCC_709;
|
||
break;
|
||
case DRM_MODE_COLORIMETRY_SYCC_601:
|
||
vsc->colorimetry = DP_COLORIMETRY_SYCC_601;
|
||
break;
|
||
case DRM_MODE_COLORIMETRY_OPYCC_601:
|
||
vsc->colorimetry = DP_COLORIMETRY_OPYCC_601;
|
||
break;
|
||
case DRM_MODE_COLORIMETRY_BT2020_CYCC:
|
||
vsc->colorimetry = DP_COLORIMETRY_BT2020_CYCC;
|
||
break;
|
||
case DRM_MODE_COLORIMETRY_BT2020_RGB:
|
||
vsc->colorimetry = DP_COLORIMETRY_BT2020_RGB;
|
||
break;
|
||
case DRM_MODE_COLORIMETRY_BT2020_YCC:
|
||
vsc->colorimetry = DP_COLORIMETRY_BT2020_YCC;
|
||
break;
|
||
case DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65:
|
||
case DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER:
|
||
vsc->colorimetry = DP_COLORIMETRY_DCI_P3_RGB;
|
||
break;
|
||
default:
|
||
/*
|
||
* RGB->YCBCR color conversion uses the BT.709
|
||
* color space.
|
||
*/
|
||
if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
|
||
vsc->colorimetry = DP_COLORIMETRY_BT709_YCC;
|
||
else
|
||
vsc->colorimetry = DP_COLORIMETRY_DEFAULT;
|
||
break;
|
||
}
|
||
|
||
vsc->bpc = crtc_state->pipe_bpp / 3;
|
||
|
||
/* only RGB pixelformat supports 6 bpc */
|
||
drm_WARN_ON(&dev_priv->drm,
|
||
vsc->bpc == 6 && vsc->pixelformat != DP_PIXELFORMAT_RGB);
|
||
|
||
/* all YCbCr are always limited range */
|
||
vsc->dynamic_range = DP_DYNAMIC_RANGE_CTA;
|
||
vsc->content_type = DP_CONTENT_TYPE_NOT_DEFINED;
|
||
}
|
||
|
||
static void intel_dp_compute_vsc_sdp(struct intel_dp *intel_dp,
|
||
struct intel_crtc_state *crtc_state,
|
||
const struct drm_connector_state *conn_state)
|
||
{
|
||
struct drm_dp_vsc_sdp *vsc = &crtc_state->infoframes.vsc;
|
||
|
||
/* When a crtc state has PSR, VSC SDP will be handled by PSR routine */
|
||
if (crtc_state->has_psr)
|
||
return;
|
||
|
||
if (!intel_dp_needs_vsc_sdp(crtc_state, conn_state))
|
||
return;
|
||
|
||
crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_VSC);
|
||
vsc->sdp_type = DP_SDP_VSC;
|
||
intel_dp_compute_vsc_colorimetry(crtc_state, conn_state,
|
||
&crtc_state->infoframes.vsc);
|
||
}
|
||
|
||
void intel_dp_compute_psr_vsc_sdp(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state,
|
||
const struct drm_connector_state *conn_state,
|
||
struct drm_dp_vsc_sdp *vsc)
|
||
{
|
||
vsc->sdp_type = DP_SDP_VSC;
|
||
|
||
if (crtc_state->has_psr2) {
|
||
if (intel_dp->psr.colorimetry_support &&
|
||
intel_dp_needs_vsc_sdp(crtc_state, conn_state)) {
|
||
/* [PSR2, +Colorimetry] */
|
||
intel_dp_compute_vsc_colorimetry(crtc_state, conn_state,
|
||
vsc);
|
||
} else {
|
||
/*
|
||
* [PSR2, -Colorimetry]
|
||
* Prepare VSC Header for SU as per eDP 1.4 spec, Table 6-11
|
||
* 3D stereo + PSR/PSR2 + Y-coordinate.
|
||
*/
|
||
vsc->revision = 0x4;
|
||
vsc->length = 0xe;
|
||
}
|
||
} else {
|
||
/*
|
||
* [PSR1]
|
||
* Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118
|
||
* VSC SDP supporting 3D stereo + PSR (applies to eDP v1.3 or
|
||
* higher).
|
||
*/
|
||
vsc->revision = 0x2;
|
||
vsc->length = 0x8;
|
||
}
|
||
}
|
||
|
||
static void
|
||
intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp,
|
||
struct intel_crtc_state *crtc_state,
|
||
const struct drm_connector_state *conn_state)
|
||
{
|
||
int ret;
|
||
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
|
||
struct hdmi_drm_infoframe *drm_infoframe = &crtc_state->infoframes.drm.drm;
|
||
|
||
if (!conn_state->hdr_output_metadata)
|
||
return;
|
||
|
||
ret = drm_hdmi_infoframe_set_hdr_metadata(drm_infoframe, conn_state);
|
||
|
||
if (ret) {
|
||
drm_dbg_kms(&dev_priv->drm, "couldn't set HDR metadata in infoframe\n");
|
||
return;
|
||
}
|
||
|
||
crtc_state->infoframes.enable |=
|
||
intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA);
|
||
}
|
||
|
||
static bool cpu_transcoder_has_drrs(struct drm_i915_private *i915,
|
||
enum transcoder cpu_transcoder)
|
||
{
|
||
if (HAS_DOUBLE_BUFFERED_M_N(i915))
|
||
return true;
|
||
|
||
return intel_cpu_transcoder_has_m2_n2(i915, cpu_transcoder);
|
||
}
|
||
|
||
static bool can_enable_drrs(struct intel_connector *connector,
|
||
const struct intel_crtc_state *pipe_config,
|
||
const struct drm_display_mode *downclock_mode)
|
||
{
|
||
struct drm_i915_private *i915 = to_i915(connector->base.dev);
|
||
|
||
if (pipe_config->vrr.enable)
|
||
return false;
|
||
|
||
/*
|
||
* DRRS and PSR can't be enable together, so giving preference to PSR
|
||
* as it allows more power-savings by complete shutting down display,
|
||
* so to guarantee this, intel_drrs_compute_config() must be called
|
||
* after intel_psr_compute_config().
|
||
*/
|
||
if (pipe_config->has_psr)
|
||
return false;
|
||
|
||
/* FIXME missing FDI M2/N2 etc. */
|
||
if (pipe_config->has_pch_encoder)
|
||
return false;
|
||
|
||
if (!cpu_transcoder_has_drrs(i915, pipe_config->cpu_transcoder))
|
||
return false;
|
||
|
||
return downclock_mode &&
|
||
intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS;
|
||
}
|
||
|
||
static void
|
||
intel_dp_drrs_compute_config(struct intel_connector *connector,
|
||
struct intel_crtc_state *pipe_config,
|
||
int output_bpp)
|
||
{
|
||
struct drm_i915_private *i915 = to_i915(connector->base.dev);
|
||
const struct drm_display_mode *downclock_mode =
|
||
intel_panel_downclock_mode(connector, &pipe_config->hw.adjusted_mode);
|
||
int pixel_clock;
|
||
|
||
if (has_seamless_m_n(connector))
|
||
pipe_config->seamless_m_n = true;
|
||
|
||
if (!can_enable_drrs(connector, pipe_config, downclock_mode)) {
|
||
if (intel_cpu_transcoder_has_m2_n2(i915, pipe_config->cpu_transcoder))
|
||
intel_zero_m_n(&pipe_config->dp_m2_n2);
|
||
return;
|
||
}
|
||
|
||
if (IS_IRONLAKE(i915) || IS_SANDYBRIDGE(i915) || IS_IVYBRIDGE(i915))
|
||
pipe_config->msa_timing_delay = connector->panel.vbt.edp.drrs_msa_timing_delay;
|
||
|
||
pipe_config->has_drrs = true;
|
||
|
||
pixel_clock = downclock_mode->clock;
|
||
if (pipe_config->splitter.enable)
|
||
pixel_clock /= pipe_config->splitter.link_count;
|
||
|
||
intel_link_compute_m_n(output_bpp, pipe_config->lane_count, pixel_clock,
|
||
pipe_config->port_clock, &pipe_config->dp_m2_n2,
|
||
pipe_config->fec_enable);
|
||
|
||
/* FIXME: abstract this better */
|
||
if (pipe_config->splitter.enable)
|
||
pipe_config->dp_m2_n2.data_m *= pipe_config->splitter.link_count;
|
||
}
|
||
|
||
static bool intel_dp_has_audio(struct intel_encoder *encoder,
|
||
const struct intel_crtc_state *crtc_state,
|
||
const struct drm_connector_state *conn_state)
|
||
{
|
||
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
|
||
const struct intel_digital_connector_state *intel_conn_state =
|
||
to_intel_digital_connector_state(conn_state);
|
||
|
||
if (!intel_dp_port_has_audio(i915, encoder->port))
|
||
return false;
|
||
|
||
if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO)
|
||
return intel_dp->has_audio;
|
||
else
|
||
return intel_conn_state->force_audio == HDMI_AUDIO_ON;
|
||
}
|
||
|
||
static int
|
||
intel_dp_compute_output_format(struct intel_encoder *encoder,
|
||
struct intel_crtc_state *crtc_state,
|
||
struct drm_connector_state *conn_state,
|
||
bool respect_downstream_limits)
|
||
{
|
||
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
const struct drm_display_info *info = &connector->base.display_info;
|
||
const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
|
||
bool ycbcr_420_only;
|
||
int ret;
|
||
|
||
ycbcr_420_only = drm_mode_is_420_only(info, adjusted_mode);
|
||
|
||
crtc_state->output_format = intel_dp_output_format(connector, ycbcr_420_only);
|
||
|
||
if (ycbcr_420_only && !intel_dp_is_ycbcr420(intel_dp, crtc_state)) {
|
||
drm_dbg_kms(&i915->drm,
|
||
"YCbCr 4:2:0 mode but YCbCr 4:2:0 output not possible. Falling back to RGB.\n");
|
||
crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
|
||
}
|
||
|
||
ret = intel_dp_compute_link_config(encoder, crtc_state, conn_state,
|
||
respect_downstream_limits);
|
||
if (ret) {
|
||
if (intel_dp_is_ycbcr420(intel_dp, crtc_state) ||
|
||
!connector->base.ycbcr_420_allowed ||
|
||
!drm_mode_is_420_also(info, adjusted_mode))
|
||
return ret;
|
||
|
||
crtc_state->output_format = intel_dp_output_format(connector, true);
|
||
ret = intel_dp_compute_link_config(encoder, crtc_state, conn_state,
|
||
respect_downstream_limits);
|
||
}
|
||
|
||
return ret;
|
||
}
|
||
|
||
int
|
||
intel_dp_compute_config(struct intel_encoder *encoder,
|
||
struct intel_crtc_state *pipe_config,
|
||
struct drm_connector_state *conn_state)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
|
||
const struct drm_display_mode *fixed_mode;
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
int ret = 0, output_bpp;
|
||
|
||
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && encoder->port != PORT_A)
|
||
pipe_config->has_pch_encoder = true;
|
||
|
||
pipe_config->has_audio = intel_dp_has_audio(encoder, pipe_config, conn_state);
|
||
|
||
fixed_mode = intel_panel_fixed_mode(connector, adjusted_mode);
|
||
if (intel_dp_is_edp(intel_dp) && fixed_mode) {
|
||
ret = intel_panel_compute_config(connector, adjusted_mode);
|
||
if (ret)
|
||
return ret;
|
||
}
|
||
|
||
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
|
||
return -EINVAL;
|
||
|
||
if (HAS_GMCH(dev_priv) &&
|
||
adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
|
||
return -EINVAL;
|
||
|
||
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
|
||
return -EINVAL;
|
||
|
||
if (intel_dp_hdisplay_bad(dev_priv, adjusted_mode->crtc_hdisplay))
|
||
return -EINVAL;
|
||
|
||
/*
|
||
* Try to respect downstream TMDS clock limits first, if
|
||
* that fails assume the user might know something we don't.
|
||
*/
|
||
ret = intel_dp_compute_output_format(encoder, pipe_config, conn_state, true);
|
||
if (ret)
|
||
ret = intel_dp_compute_output_format(encoder, pipe_config, conn_state, false);
|
||
if (ret)
|
||
return ret;
|
||
|
||
if ((intel_dp_is_edp(intel_dp) && fixed_mode) ||
|
||
pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
|
||
ret = intel_panel_fitting(pipe_config, conn_state);
|
||
if (ret)
|
||
return ret;
|
||
}
|
||
|
||
pipe_config->limited_color_range =
|
||
intel_dp_limited_color_range(pipe_config, conn_state);
|
||
|
||
if (pipe_config->dsc.compression_enable)
|
||
output_bpp = pipe_config->dsc.compressed_bpp;
|
||
else
|
||
output_bpp = intel_dp_output_bpp(pipe_config->output_format,
|
||
pipe_config->pipe_bpp);
|
||
|
||
if (intel_dp->mso_link_count) {
|
||
int n = intel_dp->mso_link_count;
|
||
int overlap = intel_dp->mso_pixel_overlap;
|
||
|
||
pipe_config->splitter.enable = true;
|
||
pipe_config->splitter.link_count = n;
|
||
pipe_config->splitter.pixel_overlap = overlap;
|
||
|
||
drm_dbg_kms(&dev_priv->drm, "MSO link count %d, pixel overlap %d\n",
|
||
n, overlap);
|
||
|
||
adjusted_mode->crtc_hdisplay = adjusted_mode->crtc_hdisplay / n + overlap;
|
||
adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hblank_start / n + overlap;
|
||
adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_hblank_end / n + overlap;
|
||
adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hsync_start / n + overlap;
|
||
adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_end / n + overlap;
|
||
adjusted_mode->crtc_htotal = adjusted_mode->crtc_htotal / n + overlap;
|
||
adjusted_mode->crtc_clock /= n;
|
||
}
|
||
|
||
intel_link_compute_m_n(output_bpp,
|
||
pipe_config->lane_count,
|
||
adjusted_mode->crtc_clock,
|
||
pipe_config->port_clock,
|
||
&pipe_config->dp_m_n,
|
||
pipe_config->fec_enable);
|
||
|
||
/* FIXME: abstract this better */
|
||
if (pipe_config->splitter.enable)
|
||
pipe_config->dp_m_n.data_m *= pipe_config->splitter.link_count;
|
||
|
||
if (!HAS_DDI(dev_priv))
|
||
g4x_dp_set_clock(encoder, pipe_config);
|
||
|
||
intel_vrr_compute_config(pipe_config, conn_state);
|
||
intel_psr_compute_config(intel_dp, pipe_config, conn_state);
|
||
intel_dp_drrs_compute_config(connector, pipe_config, output_bpp);
|
||
intel_dp_compute_vsc_sdp(intel_dp, pipe_config, conn_state);
|
||
intel_dp_compute_hdr_metadata_infoframe_sdp(intel_dp, pipe_config, conn_state);
|
||
|
||
return 0;
|
||
}
|
||
|
||
void intel_dp_set_link_params(struct intel_dp *intel_dp,
|
||
int link_rate, int lane_count)
|
||
{
|
||
memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set));
|
||
intel_dp->link_trained = false;
|
||
intel_dp->link_rate = link_rate;
|
||
intel_dp->lane_count = lane_count;
|
||
}
|
||
|
||
static void intel_dp_reset_max_link_params(struct intel_dp *intel_dp)
|
||
{
|
||
intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp);
|
||
intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
|
||
}
|
||
|
||
/* Enable backlight PWM and backlight PP control. */
|
||
void intel_edp_backlight_on(const struct intel_crtc_state *crtc_state,
|
||
const struct drm_connector_state *conn_state)
|
||
{
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(conn_state->best_encoder));
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
|
||
if (!intel_dp_is_edp(intel_dp))
|
||
return;
|
||
|
||
drm_dbg_kms(&i915->drm, "\n");
|
||
|
||
intel_backlight_enable(crtc_state, conn_state);
|
||
intel_pps_backlight_on(intel_dp);
|
||
}
|
||
|
||
/* Disable backlight PP control and backlight PWM. */
|
||
void intel_edp_backlight_off(const struct drm_connector_state *old_conn_state)
|
||
{
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(old_conn_state->best_encoder));
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
|
||
if (!intel_dp_is_edp(intel_dp))
|
||
return;
|
||
|
||
drm_dbg_kms(&i915->drm, "\n");
|
||
|
||
intel_pps_backlight_off(intel_dp);
|
||
intel_backlight_disable(old_conn_state);
|
||
}
|
||
|
||
static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp)
|
||
{
|
||
/*
|
||
* DPCD 1.2+ should support BRANCH_DEVICE_CTRL, and thus
|
||
* be capable of signalling downstream hpd with a long pulse.
|
||
* Whether or not that means D3 is safe to use is not clear,
|
||
* but let's assume so until proven otherwise.
|
||
*
|
||
* FIXME should really check all downstream ports...
|
||
*/
|
||
return intel_dp->dpcd[DP_DPCD_REV] == 0x11 &&
|
||
drm_dp_is_branch(intel_dp->dpcd) &&
|
||
intel_dp->downstream_ports[0] & DP_DS_PORT_HPD;
|
||
}
|
||
|
||
void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state,
|
||
bool enable)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
int ret;
|
||
|
||
if (!crtc_state->dsc.compression_enable)
|
||
return;
|
||
|
||
ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_DSC_ENABLE,
|
||
enable ? DP_DECOMPRESSION_EN : 0);
|
||
if (ret < 0)
|
||
drm_dbg_kms(&i915->drm,
|
||
"Failed to %s sink decompression state\n",
|
||
str_enable_disable(enable));
|
||
}
|
||
|
||
static void
|
||
intel_edp_init_source_oui(struct intel_dp *intel_dp, bool careful)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
u8 oui[] = { 0x00, 0xaa, 0x01 };
|
||
u8 buf[3] = { 0 };
|
||
|
||
/*
|
||
* During driver init, we want to be careful and avoid changing the source OUI if it's
|
||
* already set to what we want, so as to avoid clearing any state by accident
|
||
*/
|
||
if (careful) {
|
||
if (drm_dp_dpcd_read(&intel_dp->aux, DP_SOURCE_OUI, buf, sizeof(buf)) < 0)
|
||
drm_err(&i915->drm, "Failed to read source OUI\n");
|
||
|
||
if (memcmp(oui, buf, sizeof(oui)) == 0)
|
||
return;
|
||
}
|
||
|
||
if (drm_dp_dpcd_write(&intel_dp->aux, DP_SOURCE_OUI, oui, sizeof(oui)) < 0)
|
||
drm_err(&i915->drm, "Failed to write source OUI\n");
|
||
|
||
intel_dp->last_oui_write = jiffies;
|
||
}
|
||
|
||
void intel_dp_wait_source_oui(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
|
||
drm_dbg_kms(&i915->drm, "Performing OUI wait\n");
|
||
wait_remaining_ms_from_jiffies(intel_dp->last_oui_write, 30);
|
||
}
|
||
|
||
/* If the device supports it, try to set the power state appropriately */
|
||
void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode)
|
||
{
|
||
struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
|
||
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
|
||
int ret, i;
|
||
|
||
/* Should have a valid DPCD by this point */
|
||
if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
|
||
return;
|
||
|
||
if (mode != DP_SET_POWER_D0) {
|
||
if (downstream_hpd_needs_d0(intel_dp))
|
||
return;
|
||
|
||
ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode);
|
||
} else {
|
||
struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp);
|
||
|
||
lspcon_resume(dp_to_dig_port(intel_dp));
|
||
|
||
/* Write the source OUI as early as possible */
|
||
if (intel_dp_is_edp(intel_dp))
|
||
intel_edp_init_source_oui(intel_dp, false);
|
||
|
||
/*
|
||
* When turning on, we need to retry for 1ms to give the sink
|
||
* time to wake up.
|
||
*/
|
||
for (i = 0; i < 3; i++) {
|
||
ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode);
|
||
if (ret == 1)
|
||
break;
|
||
msleep(1);
|
||
}
|
||
|
||
if (ret == 1 && lspcon->active)
|
||
lspcon_wait_pcon_mode(lspcon);
|
||
}
|
||
|
||
if (ret != 1)
|
||
drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Set power to %s failed\n",
|
||
encoder->base.base.id, encoder->base.name,
|
||
mode == DP_SET_POWER_D0 ? "D0" : "D3");
|
||
}
|
||
|
||
static bool
|
||
intel_dp_get_dpcd(struct intel_dp *intel_dp);
|
||
|
||
/**
|
||
* intel_dp_sync_state - sync the encoder state during init/resume
|
||
* @encoder: intel encoder to sync
|
||
* @crtc_state: state for the CRTC connected to the encoder
|
||
*
|
||
* Sync any state stored in the encoder wrt. HW state during driver init
|
||
* and system resume.
|
||
*/
|
||
void intel_dp_sync_state(struct intel_encoder *encoder,
|
||
const struct intel_crtc_state *crtc_state)
|
||
{
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
|
||
|
||
if (!crtc_state)
|
||
return;
|
||
|
||
/*
|
||
* Don't clobber DPCD if it's been already read out during output
|
||
* setup (eDP) or detect.
|
||
*/
|
||
if (intel_dp->dpcd[DP_DPCD_REV] == 0)
|
||
intel_dp_get_dpcd(intel_dp);
|
||
|
||
intel_dp_reset_max_link_params(intel_dp);
|
||
}
|
||
|
||
bool intel_dp_initial_fastset_check(struct intel_encoder *encoder,
|
||
struct intel_crtc_state *crtc_state)
|
||
{
|
||
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
|
||
bool fastset = true;
|
||
|
||
/*
|
||
* If BIOS has set an unsupported or non-standard link rate for some
|
||
* reason force an encoder recompute and full modeset.
|
||
*/
|
||
if (intel_dp_rate_index(intel_dp->source_rates, intel_dp->num_source_rates,
|
||
crtc_state->port_clock) < 0) {
|
||
drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Forcing full modeset due to unsupported link rate\n",
|
||
encoder->base.base.id, encoder->base.name);
|
||
crtc_state->uapi.connectors_changed = true;
|
||
fastset = false;
|
||
}
|
||
|
||
/*
|
||
* FIXME hack to force full modeset when DSC is being used.
|
||
*
|
||
* As long as we do not have full state readout and config comparison
|
||
* of crtc_state->dsc, we have no way to ensure reliable fastset.
|
||
* Remove once we have readout for DSC.
|
||
*/
|
||
if (crtc_state->dsc.compression_enable) {
|
||
drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Forcing full modeset due to DSC being enabled\n",
|
||
encoder->base.base.id, encoder->base.name);
|
||
crtc_state->uapi.mode_changed = true;
|
||
fastset = false;
|
||
}
|
||
|
||
if (CAN_PSR(intel_dp)) {
|
||
drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Forcing full modeset to compute PSR state\n",
|
||
encoder->base.base.id, encoder->base.name);
|
||
crtc_state->uapi.mode_changed = true;
|
||
fastset = false;
|
||
}
|
||
|
||
return fastset;
|
||
}
|
||
|
||
static void intel_dp_get_pcon_dsc_cap(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
|
||
/* Clear the cached register set to avoid using stale values */
|
||
|
||
memset(intel_dp->pcon_dsc_dpcd, 0, sizeof(intel_dp->pcon_dsc_dpcd));
|
||
|
||
if (drm_dp_dpcd_read(&intel_dp->aux, DP_PCON_DSC_ENCODER,
|
||
intel_dp->pcon_dsc_dpcd,
|
||
sizeof(intel_dp->pcon_dsc_dpcd)) < 0)
|
||
drm_err(&i915->drm, "Failed to read DPCD register 0x%x\n",
|
||
DP_PCON_DSC_ENCODER);
|
||
|
||
drm_dbg_kms(&i915->drm, "PCON ENCODER DSC DPCD: %*ph\n",
|
||
(int)sizeof(intel_dp->pcon_dsc_dpcd), intel_dp->pcon_dsc_dpcd);
|
||
}
|
||
|
||
static int intel_dp_pcon_get_frl_mask(u8 frl_bw_mask)
|
||
{
|
||
int bw_gbps[] = {9, 18, 24, 32, 40, 48};
|
||
int i;
|
||
|
||
for (i = ARRAY_SIZE(bw_gbps) - 1; i >= 0; i--) {
|
||
if (frl_bw_mask & (1 << i))
|
||
return bw_gbps[i];
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
static int intel_dp_pcon_set_frl_mask(int max_frl)
|
||
{
|
||
switch (max_frl) {
|
||
case 48:
|
||
return DP_PCON_FRL_BW_MASK_48GBPS;
|
||
case 40:
|
||
return DP_PCON_FRL_BW_MASK_40GBPS;
|
||
case 32:
|
||
return DP_PCON_FRL_BW_MASK_32GBPS;
|
||
case 24:
|
||
return DP_PCON_FRL_BW_MASK_24GBPS;
|
||
case 18:
|
||
return DP_PCON_FRL_BW_MASK_18GBPS;
|
||
case 9:
|
||
return DP_PCON_FRL_BW_MASK_9GBPS;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_connector *intel_connector = intel_dp->attached_connector;
|
||
struct drm_connector *connector = &intel_connector->base;
|
||
int max_frl_rate;
|
||
int max_lanes, rate_per_lane;
|
||
int max_dsc_lanes, dsc_rate_per_lane;
|
||
|
||
max_lanes = connector->display_info.hdmi.max_lanes;
|
||
rate_per_lane = connector->display_info.hdmi.max_frl_rate_per_lane;
|
||
max_frl_rate = max_lanes * rate_per_lane;
|
||
|
||
if (connector->display_info.hdmi.dsc_cap.v_1p2) {
|
||
max_dsc_lanes = connector->display_info.hdmi.dsc_cap.max_lanes;
|
||
dsc_rate_per_lane = connector->display_info.hdmi.dsc_cap.max_frl_rate_per_lane;
|
||
if (max_dsc_lanes && dsc_rate_per_lane)
|
||
max_frl_rate = min(max_frl_rate, max_dsc_lanes * dsc_rate_per_lane);
|
||
}
|
||
|
||
return max_frl_rate;
|
||
}
|
||
|
||
static bool
|
||
intel_dp_pcon_is_frl_trained(struct intel_dp *intel_dp,
|
||
u8 max_frl_bw_mask, u8 *frl_trained_mask)
|
||
{
|
||
if (drm_dp_pcon_hdmi_link_active(&intel_dp->aux) &&
|
||
drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, frl_trained_mask) == DP_PCON_HDMI_MODE_FRL &&
|
||
*frl_trained_mask >= max_frl_bw_mask)
|
||
return true;
|
||
|
||
return false;
|
||
}
|
||
|
||
static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp)
|
||
{
|
||
#define TIMEOUT_FRL_READY_MS 500
|
||
#define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000
|
||
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
int max_frl_bw, max_pcon_frl_bw, max_edid_frl_bw, ret;
|
||
u8 max_frl_bw_mask = 0, frl_trained_mask;
|
||
bool is_active;
|
||
|
||
max_pcon_frl_bw = intel_dp->dfp.pcon_max_frl_bw;
|
||
drm_dbg(&i915->drm, "PCON max rate = %d Gbps\n", max_pcon_frl_bw);
|
||
|
||
max_edid_frl_bw = intel_dp_hdmi_sink_max_frl(intel_dp);
|
||
drm_dbg(&i915->drm, "Sink max rate from EDID = %d Gbps\n", max_edid_frl_bw);
|
||
|
||
max_frl_bw = min(max_edid_frl_bw, max_pcon_frl_bw);
|
||
|
||
if (max_frl_bw <= 0)
|
||
return -EINVAL;
|
||
|
||
max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw);
|
||
drm_dbg(&i915->drm, "MAX_FRL_BW_MASK = %u\n", max_frl_bw_mask);
|
||
|
||
if (intel_dp_pcon_is_frl_trained(intel_dp, max_frl_bw_mask, &frl_trained_mask))
|
||
goto frl_trained;
|
||
|
||
ret = drm_dp_pcon_frl_prepare(&intel_dp->aux, false);
|
||
if (ret < 0)
|
||
return ret;
|
||
/* Wait for PCON to be FRL Ready */
|
||
wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) == true, TIMEOUT_FRL_READY_MS);
|
||
|
||
if (!is_active)
|
||
return -ETIMEDOUT;
|
||
|
||
ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw,
|
||
DP_PCON_ENABLE_SEQUENTIAL_LINK);
|
||
if (ret < 0)
|
||
return ret;
|
||
ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask,
|
||
DP_PCON_FRL_LINK_TRAIN_NORMAL);
|
||
if (ret < 0)
|
||
return ret;
|
||
ret = drm_dp_pcon_frl_enable(&intel_dp->aux);
|
||
if (ret < 0)
|
||
return ret;
|
||
/*
|
||
* Wait for FRL to be completed
|
||
* Check if the HDMI Link is up and active.
|
||
*/
|
||
wait_for(is_active =
|
||
intel_dp_pcon_is_frl_trained(intel_dp, max_frl_bw_mask, &frl_trained_mask),
|
||
TIMEOUT_HDMI_LINK_ACTIVE_MS);
|
||
|
||
if (!is_active)
|
||
return -ETIMEDOUT;
|
||
|
||
frl_trained:
|
||
drm_dbg(&i915->drm, "FRL_TRAINED_MASK = %u\n", frl_trained_mask);
|
||
intel_dp->frl.trained_rate_gbps = intel_dp_pcon_get_frl_mask(frl_trained_mask);
|
||
intel_dp->frl.is_trained = true;
|
||
drm_dbg(&i915->drm, "FRL trained with : %d Gbps\n", intel_dp->frl.trained_rate_gbps);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static bool intel_dp_is_hdmi_2_1_sink(struct intel_dp *intel_dp)
|
||
{
|
||
if (drm_dp_is_branch(intel_dp->dpcd) &&
|
||
intel_dp->has_hdmi_sink &&
|
||
intel_dp_hdmi_sink_max_frl(intel_dp) > 0)
|
||
return true;
|
||
|
||
return false;
|
||
}
|
||
|
||
static
|
||
int intel_dp_pcon_set_tmds_mode(struct intel_dp *intel_dp)
|
||
{
|
||
int ret;
|
||
u8 buf = 0;
|
||
|
||
/* Set PCON source control mode */
|
||
buf |= DP_PCON_ENABLE_SOURCE_CTL_MODE;
|
||
|
||
ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf);
|
||
if (ret < 0)
|
||
return ret;
|
||
|
||
/* Set HDMI LINK ENABLE */
|
||
buf |= DP_PCON_ENABLE_HDMI_LINK;
|
||
ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf);
|
||
if (ret < 0)
|
||
return ret;
|
||
|
||
return 0;
|
||
}
|
||
|
||
void intel_dp_check_frl_training(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
|
||
|
||
/*
|
||
* Always go for FRL training if:
|
||
* -PCON supports SRC_CTL_MODE (VESA DP2.0-HDMI2.1 PCON Spec Draft-1 Sec-7)
|
||
* -sink is HDMI2.1
|
||
*/
|
||
if (!(intel_dp->downstream_ports[2] & DP_PCON_SOURCE_CTL_MODE) ||
|
||
!intel_dp_is_hdmi_2_1_sink(intel_dp) ||
|
||
intel_dp->frl.is_trained)
|
||
return;
|
||
|
||
if (intel_dp_pcon_start_frl_training(intel_dp) < 0) {
|
||
int ret, mode;
|
||
|
||
drm_dbg(&dev_priv->drm, "Couldn't set FRL mode, continuing with TMDS mode\n");
|
||
ret = intel_dp_pcon_set_tmds_mode(intel_dp);
|
||
mode = drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, NULL);
|
||
|
||
if (ret < 0 || mode != DP_PCON_HDMI_MODE_TMDS)
|
||
drm_dbg(&dev_priv->drm, "Issue with PCON, cannot set TMDS mode\n");
|
||
} else {
|
||
drm_dbg(&dev_priv->drm, "FRL training Completed\n");
|
||
}
|
||
}
|
||
|
||
static int
|
||
intel_dp_pcon_dsc_enc_slice_height(const struct intel_crtc_state *crtc_state)
|
||
{
|
||
int vactive = crtc_state->hw.adjusted_mode.vdisplay;
|
||
|
||
return intel_hdmi_dsc_get_slice_height(vactive);
|
||
}
|
||
|
||
static int
|
||
intel_dp_pcon_dsc_enc_slices(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state)
|
||
{
|
||
struct intel_connector *intel_connector = intel_dp->attached_connector;
|
||
struct drm_connector *connector = &intel_connector->base;
|
||
int hdmi_throughput = connector->display_info.hdmi.dsc_cap.clk_per_slice;
|
||
int hdmi_max_slices = connector->display_info.hdmi.dsc_cap.max_slices;
|
||
int pcon_max_slices = drm_dp_pcon_dsc_max_slices(intel_dp->pcon_dsc_dpcd);
|
||
int pcon_max_slice_width = drm_dp_pcon_dsc_max_slice_width(intel_dp->pcon_dsc_dpcd);
|
||
|
||
return intel_hdmi_dsc_get_num_slices(crtc_state, pcon_max_slices,
|
||
pcon_max_slice_width,
|
||
hdmi_max_slices, hdmi_throughput);
|
||
}
|
||
|
||
static int
|
||
intel_dp_pcon_dsc_enc_bpp(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state,
|
||
int num_slices, int slice_width)
|
||
{
|
||
struct intel_connector *intel_connector = intel_dp->attached_connector;
|
||
struct drm_connector *connector = &intel_connector->base;
|
||
int output_format = crtc_state->output_format;
|
||
bool hdmi_all_bpp = connector->display_info.hdmi.dsc_cap.all_bpp;
|
||
int pcon_fractional_bpp = drm_dp_pcon_dsc_bpp_incr(intel_dp->pcon_dsc_dpcd);
|
||
int hdmi_max_chunk_bytes =
|
||
connector->display_info.hdmi.dsc_cap.total_chunk_kbytes * 1024;
|
||
|
||
return intel_hdmi_dsc_get_bpp(pcon_fractional_bpp, slice_width,
|
||
num_slices, output_format, hdmi_all_bpp,
|
||
hdmi_max_chunk_bytes);
|
||
}
|
||
|
||
void
|
||
intel_dp_pcon_dsc_configure(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state)
|
||
{
|
||
u8 pps_param[6];
|
||
int slice_height;
|
||
int slice_width;
|
||
int num_slices;
|
||
int bits_per_pixel;
|
||
int ret;
|
||
struct intel_connector *intel_connector = intel_dp->attached_connector;
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct drm_connector *connector;
|
||
bool hdmi_is_dsc_1_2;
|
||
|
||
if (!intel_dp_is_hdmi_2_1_sink(intel_dp))
|
||
return;
|
||
|
||
if (!intel_connector)
|
||
return;
|
||
connector = &intel_connector->base;
|
||
hdmi_is_dsc_1_2 = connector->display_info.hdmi.dsc_cap.v_1p2;
|
||
|
||
if (!drm_dp_pcon_enc_is_dsc_1_2(intel_dp->pcon_dsc_dpcd) ||
|
||
!hdmi_is_dsc_1_2)
|
||
return;
|
||
|
||
slice_height = intel_dp_pcon_dsc_enc_slice_height(crtc_state);
|
||
if (!slice_height)
|
||
return;
|
||
|
||
num_slices = intel_dp_pcon_dsc_enc_slices(intel_dp, crtc_state);
|
||
if (!num_slices)
|
||
return;
|
||
|
||
slice_width = DIV_ROUND_UP(crtc_state->hw.adjusted_mode.hdisplay,
|
||
num_slices);
|
||
|
||
bits_per_pixel = intel_dp_pcon_dsc_enc_bpp(intel_dp, crtc_state,
|
||
num_slices, slice_width);
|
||
if (!bits_per_pixel)
|
||
return;
|
||
|
||
pps_param[0] = slice_height & 0xFF;
|
||
pps_param[1] = slice_height >> 8;
|
||
pps_param[2] = slice_width & 0xFF;
|
||
pps_param[3] = slice_width >> 8;
|
||
pps_param[4] = bits_per_pixel & 0xFF;
|
||
pps_param[5] = (bits_per_pixel >> 8) & 0x3;
|
||
|
||
ret = drm_dp_pcon_pps_override_param(&intel_dp->aux, pps_param);
|
||
if (ret < 0)
|
||
drm_dbg_kms(&i915->drm, "Failed to set pcon DSC\n");
|
||
}
|
||
|
||
void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
u8 tmp;
|
||
|
||
if (intel_dp->dpcd[DP_DPCD_REV] < 0x13)
|
||
return;
|
||
|
||
if (!drm_dp_is_branch(intel_dp->dpcd))
|
||
return;
|
||
|
||
tmp = intel_dp->has_hdmi_sink ?
|
||
DP_HDMI_DVI_OUTPUT_CONFIG : 0;
|
||
|
||
if (drm_dp_dpcd_writeb(&intel_dp->aux,
|
||
DP_PROTOCOL_CONVERTER_CONTROL_0, tmp) != 1)
|
||
drm_dbg_kms(&i915->drm, "Failed to %s protocol converter HDMI mode\n",
|
||
str_enable_disable(intel_dp->has_hdmi_sink));
|
||
|
||
tmp = crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 &&
|
||
intel_dp->dfp.ycbcr_444_to_420 ? DP_CONVERSION_TO_YCBCR420_ENABLE : 0;
|
||
|
||
if (drm_dp_dpcd_writeb(&intel_dp->aux,
|
||
DP_PROTOCOL_CONVERTER_CONTROL_1, tmp) != 1)
|
||
drm_dbg_kms(&i915->drm,
|
||
"Failed to %s protocol converter YCbCr 4:2:0 conversion mode\n",
|
||
str_enable_disable(intel_dp->dfp.ycbcr_444_to_420));
|
||
|
||
tmp = intel_dp->dfp.rgb_to_ycbcr ?
|
||
DP_CONVERSION_BT709_RGB_YCBCR_ENABLE : 0;
|
||
|
||
if (drm_dp_pcon_convert_rgb_to_ycbcr(&intel_dp->aux, tmp) < 0)
|
||
drm_dbg_kms(&i915->drm,
|
||
"Failed to %s protocol converter RGB->YCbCr conversion mode\n",
|
||
str_enable_disable(tmp));
|
||
}
|
||
|
||
bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp)
|
||
{
|
||
u8 dprx = 0;
|
||
|
||
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_DPRX_FEATURE_ENUMERATION_LIST,
|
||
&dprx) != 1)
|
||
return false;
|
||
return dprx & DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED;
|
||
}
|
||
|
||
static void intel_dp_get_dsc_sink_cap(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
|
||
/*
|
||
* Clear the cached register set to avoid using stale values
|
||
* for the sinks that do not support DSC.
|
||
*/
|
||
memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd));
|
||
|
||
/* Clear fec_capable to avoid using stale values */
|
||
intel_dp->fec_capable = 0;
|
||
|
||
/* Cache the DSC DPCD if eDP or DP rev >= 1.4 */
|
||
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x14 ||
|
||
intel_dp->edp_dpcd[0] >= DP_EDP_14) {
|
||
if (drm_dp_dpcd_read(&intel_dp->aux, DP_DSC_SUPPORT,
|
||
intel_dp->dsc_dpcd,
|
||
sizeof(intel_dp->dsc_dpcd)) < 0)
|
||
drm_err(&i915->drm,
|
||
"Failed to read DPCD register 0x%x\n",
|
||
DP_DSC_SUPPORT);
|
||
|
||
drm_dbg_kms(&i915->drm, "DSC DPCD: %*ph\n",
|
||
(int)sizeof(intel_dp->dsc_dpcd),
|
||
intel_dp->dsc_dpcd);
|
||
|
||
/* FEC is supported only on DP 1.4 */
|
||
if (!intel_dp_is_edp(intel_dp) &&
|
||
drm_dp_dpcd_readb(&intel_dp->aux, DP_FEC_CAPABILITY,
|
||
&intel_dp->fec_capable) < 0)
|
||
drm_err(&i915->drm,
|
||
"Failed to read FEC DPCD register\n");
|
||
|
||
drm_dbg_kms(&i915->drm, "FEC CAPABILITY: %x\n",
|
||
intel_dp->fec_capable);
|
||
}
|
||
}
|
||
|
||
static void intel_edp_mso_mode_fixup(struct intel_connector *connector,
|
||
struct drm_display_mode *mode)
|
||
{
|
||
struct intel_dp *intel_dp = intel_attached_dp(connector);
|
||
struct drm_i915_private *i915 = to_i915(connector->base.dev);
|
||
int n = intel_dp->mso_link_count;
|
||
int overlap = intel_dp->mso_pixel_overlap;
|
||
|
||
if (!mode || !n)
|
||
return;
|
||
|
||
mode->hdisplay = (mode->hdisplay - overlap) * n;
|
||
mode->hsync_start = (mode->hsync_start - overlap) * n;
|
||
mode->hsync_end = (mode->hsync_end - overlap) * n;
|
||
mode->htotal = (mode->htotal - overlap) * n;
|
||
mode->clock *= n;
|
||
|
||
drm_mode_set_name(mode);
|
||
|
||
drm_dbg_kms(&i915->drm,
|
||
"[CONNECTOR:%d:%s] using generated MSO mode: " DRM_MODE_FMT "\n",
|
||
connector->base.base.id, connector->base.name,
|
||
DRM_MODE_ARG(mode));
|
||
}
|
||
|
||
void intel_edp_fixup_vbt_bpp(struct intel_encoder *encoder, int pipe_bpp)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
|
||
if (connector->panel.vbt.edp.bpp && pipe_bpp > connector->panel.vbt.edp.bpp) {
|
||
/*
|
||
* This is a big fat ugly hack.
|
||
*
|
||
* Some machines in UEFI boot mode provide us a VBT that has 18
|
||
* bpp and 1.62 GHz link bandwidth for eDP, which for reasons
|
||
* unknown we fail to light up. Yet the same BIOS boots up with
|
||
* 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
|
||
* max, not what it tells us to use.
|
||
*
|
||
* Note: This will still be broken if the eDP panel is not lit
|
||
* up by the BIOS, and thus we can't get the mode at module
|
||
* load.
|
||
*/
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
|
||
pipe_bpp, connector->panel.vbt.edp.bpp);
|
||
connector->panel.vbt.edp.bpp = pipe_bpp;
|
||
}
|
||
}
|
||
|
||
static void intel_edp_mso_init(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
struct drm_display_info *info = &connector->base.display_info;
|
||
u8 mso;
|
||
|
||
if (intel_dp->edp_dpcd[0] < DP_EDP_14)
|
||
return;
|
||
|
||
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_MSO_LINK_CAPABILITIES, &mso) != 1) {
|
||
drm_err(&i915->drm, "Failed to read MSO cap\n");
|
||
return;
|
||
}
|
||
|
||
/* Valid configurations are SST or MSO 2x1, 2x2, 4x1 */
|
||
mso &= DP_EDP_MSO_NUMBER_OF_LINKS_MASK;
|
||
if (mso % 2 || mso > drm_dp_max_lane_count(intel_dp->dpcd)) {
|
||
drm_err(&i915->drm, "Invalid MSO link count cap %u\n", mso);
|
||
mso = 0;
|
||
}
|
||
|
||
if (mso) {
|
||
drm_dbg_kms(&i915->drm, "Sink MSO %ux%u configuration, pixel overlap %u\n",
|
||
mso, drm_dp_max_lane_count(intel_dp->dpcd) / mso,
|
||
info->mso_pixel_overlap);
|
||
if (!HAS_MSO(i915)) {
|
||
drm_err(&i915->drm, "No source MSO support, disabling\n");
|
||
mso = 0;
|
||
}
|
||
}
|
||
|
||
intel_dp->mso_link_count = mso;
|
||
intel_dp->mso_pixel_overlap = mso ? info->mso_pixel_overlap : 0;
|
||
}
|
||
|
||
static bool
|
||
intel_edp_init_dpcd(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *dev_priv =
|
||
to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
|
||
|
||
/* this function is meant to be called only once */
|
||
drm_WARN_ON(&dev_priv->drm, intel_dp->dpcd[DP_DPCD_REV] != 0);
|
||
|
||
if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd) != 0)
|
||
return false;
|
||
|
||
drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc,
|
||
drm_dp_is_branch(intel_dp->dpcd));
|
||
|
||
/*
|
||
* Read the eDP display control registers.
|
||
*
|
||
* Do this independent of DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in
|
||
* DP_EDP_CONFIGURATION_CAP, because some buggy displays do not have it
|
||
* set, but require eDP 1.4+ detection (e.g. for supported link rates
|
||
* method). The display control registers should read zero if they're
|
||
* not supported anyway.
|
||
*/
|
||
if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV,
|
||
intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) ==
|
||
sizeof(intel_dp->edp_dpcd)) {
|
||
drm_dbg_kms(&dev_priv->drm, "eDP DPCD: %*ph\n",
|
||
(int)sizeof(intel_dp->edp_dpcd),
|
||
intel_dp->edp_dpcd);
|
||
|
||
intel_dp->use_max_params = intel_dp->edp_dpcd[0] < DP_EDP_14;
|
||
}
|
||
|
||
/*
|
||
* This has to be called after intel_dp->edp_dpcd is filled, PSR checks
|
||
* for SET_POWER_CAPABLE bit in intel_dp->edp_dpcd[1]
|
||
*/
|
||
intel_psr_init_dpcd(intel_dp);
|
||
|
||
/* Clear the default sink rates */
|
||
intel_dp->num_sink_rates = 0;
|
||
|
||
/* Read the eDP 1.4+ supported link rates. */
|
||
if (intel_dp->edp_dpcd[0] >= DP_EDP_14) {
|
||
__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
|
||
int i;
|
||
|
||
drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES,
|
||
sink_rates, sizeof(sink_rates));
|
||
|
||
for (i = 0; i < ARRAY_SIZE(sink_rates); i++) {
|
||
int val = le16_to_cpu(sink_rates[i]);
|
||
|
||
if (val == 0)
|
||
break;
|
||
|
||
/* Value read multiplied by 200kHz gives the per-lane
|
||
* link rate in kHz. The source rates are, however,
|
||
* stored in terms of LS_Clk kHz. The full conversion
|
||
* back to symbols is
|
||
* (val * 200kHz)*(8/10 ch. encoding)*(1/8 bit to Byte)
|
||
*/
|
||
intel_dp->sink_rates[i] = (val * 200) / 10;
|
||
}
|
||
intel_dp->num_sink_rates = i;
|
||
}
|
||
|
||
/*
|
||
* Use DP_LINK_RATE_SET if DP_SUPPORTED_LINK_RATES are available,
|
||
* default to DP_MAX_LINK_RATE and DP_LINK_BW_SET otherwise.
|
||
*/
|
||
if (intel_dp->num_sink_rates)
|
||
intel_dp->use_rate_select = true;
|
||
else
|
||
intel_dp_set_sink_rates(intel_dp);
|
||
intel_dp_set_max_sink_lane_count(intel_dp);
|
||
|
||
/* Read the eDP DSC DPCD registers */
|
||
if (DISPLAY_VER(dev_priv) >= 10)
|
||
intel_dp_get_dsc_sink_cap(intel_dp);
|
||
|
||
/*
|
||
* If needed, program our source OUI so we can make various Intel-specific AUX services
|
||
* available (such as HDR backlight controls)
|
||
*/
|
||
intel_edp_init_source_oui(intel_dp, true);
|
||
|
||
return true;
|
||
}
|
||
|
||
static bool
|
||
intel_dp_has_sink_count(struct intel_dp *intel_dp)
|
||
{
|
||
if (!intel_dp->attached_connector)
|
||
return false;
|
||
|
||
return drm_dp_read_sink_count_cap(&intel_dp->attached_connector->base,
|
||
intel_dp->dpcd,
|
||
&intel_dp->desc);
|
||
}
|
||
|
||
static bool
|
||
intel_dp_get_dpcd(struct intel_dp *intel_dp)
|
||
{
|
||
int ret;
|
||
|
||
if (intel_dp_init_lttpr_and_dprx_caps(intel_dp) < 0)
|
||
return false;
|
||
|
||
/*
|
||
* Don't clobber cached eDP rates. Also skip re-reading
|
||
* the OUI/ID since we know it won't change.
|
||
*/
|
||
if (!intel_dp_is_edp(intel_dp)) {
|
||
drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc,
|
||
drm_dp_is_branch(intel_dp->dpcd));
|
||
|
||
intel_dp_set_sink_rates(intel_dp);
|
||
intel_dp_set_max_sink_lane_count(intel_dp);
|
||
intel_dp_set_common_rates(intel_dp);
|
||
}
|
||
|
||
if (intel_dp_has_sink_count(intel_dp)) {
|
||
ret = drm_dp_read_sink_count(&intel_dp->aux);
|
||
if (ret < 0)
|
||
return false;
|
||
|
||
/*
|
||
* Sink count can change between short pulse hpd hence
|
||
* a member variable in intel_dp will track any changes
|
||
* between short pulse interrupts.
|
||
*/
|
||
intel_dp->sink_count = ret;
|
||
|
||
/*
|
||
* SINK_COUNT == 0 and DOWNSTREAM_PORT_PRESENT == 1 implies that
|
||
* a dongle is present but no display. Unless we require to know
|
||
* if a dongle is present or not, we don't need to update
|
||
* downstream port information. So, an early return here saves
|
||
* time from performing other operations which are not required.
|
||
*/
|
||
if (!intel_dp->sink_count)
|
||
return false;
|
||
}
|
||
|
||
return drm_dp_read_downstream_info(&intel_dp->aux, intel_dp->dpcd,
|
||
intel_dp->downstream_ports) == 0;
|
||
}
|
||
|
||
static bool
|
||
intel_dp_can_mst(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
|
||
return i915->params.enable_dp_mst &&
|
||
intel_dp_mst_source_support(intel_dp) &&
|
||
drm_dp_read_mst_cap(&intel_dp->aux, intel_dp->dpcd);
|
||
}
|
||
|
||
static void
|
||
intel_dp_configure_mst(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct intel_encoder *encoder =
|
||
&dp_to_dig_port(intel_dp)->base;
|
||
bool sink_can_mst = drm_dp_read_mst_cap(&intel_dp->aux, intel_dp->dpcd);
|
||
|
||
drm_dbg_kms(&i915->drm,
|
||
"[ENCODER:%d:%s] MST support: port: %s, sink: %s, modparam: %s\n",
|
||
encoder->base.base.id, encoder->base.name,
|
||
str_yes_no(intel_dp_mst_source_support(intel_dp)),
|
||
str_yes_no(sink_can_mst),
|
||
str_yes_no(i915->params.enable_dp_mst));
|
||
|
||
if (!intel_dp_mst_source_support(intel_dp))
|
||
return;
|
||
|
||
intel_dp->is_mst = sink_can_mst &&
|
||
i915->params.enable_dp_mst;
|
||
|
||
drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
|
||
intel_dp->is_mst);
|
||
}
|
||
|
||
static bool
|
||
intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *esi)
|
||
{
|
||
return drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT_ESI, esi, 4) == 4;
|
||
}
|
||
|
||
static bool intel_dp_ack_sink_irq_esi(struct intel_dp *intel_dp, u8 esi[4])
|
||
{
|
||
int retry;
|
||
|
||
for (retry = 0; retry < 3; retry++) {
|
||
if (drm_dp_dpcd_write(&intel_dp->aux, DP_SINK_COUNT_ESI + 1,
|
||
&esi[1], 3) == 3)
|
||
return true;
|
||
}
|
||
|
||
return false;
|
||
}
|
||
|
||
bool
|
||
intel_dp_needs_vsc_sdp(const struct intel_crtc_state *crtc_state,
|
||
const struct drm_connector_state *conn_state)
|
||
{
|
||
/*
|
||
* As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication
|
||
* of Color Encoding Format and Content Color Gamut], in order to
|
||
* sending YCBCR 420 or HDR BT.2020 signals we should use DP VSC SDP.
|
||
*/
|
||
if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
|
||
return true;
|
||
|
||
switch (conn_state->colorspace) {
|
||
case DRM_MODE_COLORIMETRY_SYCC_601:
|
||
case DRM_MODE_COLORIMETRY_OPYCC_601:
|
||
case DRM_MODE_COLORIMETRY_BT2020_YCC:
|
||
case DRM_MODE_COLORIMETRY_BT2020_RGB:
|
||
case DRM_MODE_COLORIMETRY_BT2020_CYCC:
|
||
return true;
|
||
default:
|
||
break;
|
||
}
|
||
|
||
return false;
|
||
}
|
||
|
||
static ssize_t intel_dp_vsc_sdp_pack(const struct drm_dp_vsc_sdp *vsc,
|
||
struct dp_sdp *sdp, size_t size)
|
||
{
|
||
size_t length = sizeof(struct dp_sdp);
|
||
|
||
if (size < length)
|
||
return -ENOSPC;
|
||
|
||
memset(sdp, 0, size);
|
||
|
||
/*
|
||
* Prepare VSC Header for SU as per DP 1.4a spec, Table 2-119
|
||
* VSC SDP Header Bytes
|
||
*/
|
||
sdp->sdp_header.HB0 = 0; /* Secondary-Data Packet ID = 0 */
|
||
sdp->sdp_header.HB1 = vsc->sdp_type; /* Secondary-data Packet Type */
|
||
sdp->sdp_header.HB2 = vsc->revision; /* Revision Number */
|
||
sdp->sdp_header.HB3 = vsc->length; /* Number of Valid Data Bytes */
|
||
|
||
/*
|
||
* Only revision 0x5 supports Pixel Encoding/Colorimetry Format as
|
||
* per DP 1.4a spec.
|
||
*/
|
||
if (vsc->revision != 0x5)
|
||
goto out;
|
||
|
||
/* VSC SDP Payload for DB16 through DB18 */
|
||
/* Pixel Encoding and Colorimetry Formats */
|
||
sdp->db[16] = (vsc->pixelformat & 0xf) << 4; /* DB16[7:4] */
|
||
sdp->db[16] |= vsc->colorimetry & 0xf; /* DB16[3:0] */
|
||
|
||
switch (vsc->bpc) {
|
||
case 6:
|
||
/* 6bpc: 0x0 */
|
||
break;
|
||
case 8:
|
||
sdp->db[17] = 0x1; /* DB17[3:0] */
|
||
break;
|
||
case 10:
|
||
sdp->db[17] = 0x2;
|
||
break;
|
||
case 12:
|
||
sdp->db[17] = 0x3;
|
||
break;
|
||
case 16:
|
||
sdp->db[17] = 0x4;
|
||
break;
|
||
default:
|
||
MISSING_CASE(vsc->bpc);
|
||
break;
|
||
}
|
||
/* Dynamic Range and Component Bit Depth */
|
||
if (vsc->dynamic_range == DP_DYNAMIC_RANGE_CTA)
|
||
sdp->db[17] |= 0x80; /* DB17[7] */
|
||
|
||
/* Content Type */
|
||
sdp->db[18] = vsc->content_type & 0x7;
|
||
|
||
out:
|
||
return length;
|
||
}
|
||
|
||
static ssize_t
|
||
intel_dp_hdr_metadata_infoframe_sdp_pack(struct drm_i915_private *i915,
|
||
const struct hdmi_drm_infoframe *drm_infoframe,
|
||
struct dp_sdp *sdp,
|
||
size_t size)
|
||
{
|
||
size_t length = sizeof(struct dp_sdp);
|
||
const int infoframe_size = HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE;
|
||
unsigned char buf[HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE];
|
||
ssize_t len;
|
||
|
||
if (size < length)
|
||
return -ENOSPC;
|
||
|
||
memset(sdp, 0, size);
|
||
|
||
len = hdmi_drm_infoframe_pack_only(drm_infoframe, buf, sizeof(buf));
|
||
if (len < 0) {
|
||
drm_dbg_kms(&i915->drm, "buffer size is smaller than hdr metadata infoframe\n");
|
||
return -ENOSPC;
|
||
}
|
||
|
||
if (len != infoframe_size) {
|
||
drm_dbg_kms(&i915->drm, "wrong static hdr metadata size\n");
|
||
return -ENOSPC;
|
||
}
|
||
|
||
/*
|
||
* Set up the infoframe sdp packet for HDR static metadata.
|
||
* Prepare VSC Header for SU as per DP 1.4a spec,
|
||
* Table 2-100 and Table 2-101
|
||
*/
|
||
|
||
/* Secondary-Data Packet ID, 00h for non-Audio INFOFRAME */
|
||
sdp->sdp_header.HB0 = 0;
|
||
/*
|
||
* Packet Type 80h + Non-audio INFOFRAME Type value
|
||
* HDMI_INFOFRAME_TYPE_DRM: 0x87
|
||
* - 80h + Non-audio INFOFRAME Type value
|
||
* - InfoFrame Type: 0x07
|
||
* [CTA-861-G Table-42 Dynamic Range and Mastering InfoFrame]
|
||
*/
|
||
sdp->sdp_header.HB1 = drm_infoframe->type;
|
||
/*
|
||
* Least Significant Eight Bits of (Data Byte Count – 1)
|
||
* infoframe_size - 1
|
||
*/
|
||
sdp->sdp_header.HB2 = 0x1D;
|
||
/* INFOFRAME SDP Version Number */
|
||
sdp->sdp_header.HB3 = (0x13 << 2);
|
||
/* CTA Header Byte 2 (INFOFRAME Version Number) */
|
||
sdp->db[0] = drm_infoframe->version;
|
||
/* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */
|
||
sdp->db[1] = drm_infoframe->length;
|
||
/*
|
||
* Copy HDMI_DRM_INFOFRAME_SIZE size from a buffer after
|
||
* HDMI_INFOFRAME_HEADER_SIZE
|
||
*/
|
||
BUILD_BUG_ON(sizeof(sdp->db) < HDMI_DRM_INFOFRAME_SIZE + 2);
|
||
memcpy(&sdp->db[2], &buf[HDMI_INFOFRAME_HEADER_SIZE],
|
||
HDMI_DRM_INFOFRAME_SIZE);
|
||
|
||
/*
|
||
* Size of DP infoframe sdp packet for HDR static metadata consists of
|
||
* - DP SDP Header(struct dp_sdp_header): 4 bytes
|
||
* - Two Data Blocks: 2 bytes
|
||
* CTA Header Byte2 (INFOFRAME Version Number)
|
||
* CTA Header Byte3 (Length of INFOFRAME)
|
||
* - HDMI_DRM_INFOFRAME_SIZE: 26 bytes
|
||
*
|
||
* Prior to GEN11's GMP register size is identical to DP HDR static metadata
|
||
* infoframe size. But GEN11+ has larger than that size, write_infoframe
|
||
* will pad rest of the size.
|
||
*/
|
||
return sizeof(struct dp_sdp_header) + 2 + HDMI_DRM_INFOFRAME_SIZE;
|
||
}
|
||
|
||
static void intel_write_dp_sdp(struct intel_encoder *encoder,
|
||
const struct intel_crtc_state *crtc_state,
|
||
unsigned int type)
|
||
{
|
||
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
struct dp_sdp sdp = {};
|
||
ssize_t len;
|
||
|
||
if ((crtc_state->infoframes.enable &
|
||
intel_hdmi_infoframe_enable(type)) == 0)
|
||
return;
|
||
|
||
switch (type) {
|
||
case DP_SDP_VSC:
|
||
len = intel_dp_vsc_sdp_pack(&crtc_state->infoframes.vsc, &sdp,
|
||
sizeof(sdp));
|
||
break;
|
||
case HDMI_PACKET_TYPE_GAMUT_METADATA:
|
||
len = intel_dp_hdr_metadata_infoframe_sdp_pack(dev_priv,
|
||
&crtc_state->infoframes.drm.drm,
|
||
&sdp, sizeof(sdp));
|
||
break;
|
||
default:
|
||
MISSING_CASE(type);
|
||
return;
|
||
}
|
||
|
||
if (drm_WARN_ON(&dev_priv->drm, len < 0))
|
||
return;
|
||
|
||
dig_port->write_infoframe(encoder, crtc_state, type, &sdp, len);
|
||
}
|
||
|
||
void intel_write_dp_vsc_sdp(struct intel_encoder *encoder,
|
||
const struct intel_crtc_state *crtc_state,
|
||
const struct drm_dp_vsc_sdp *vsc)
|
||
{
|
||
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
struct dp_sdp sdp = {};
|
||
ssize_t len;
|
||
|
||
len = intel_dp_vsc_sdp_pack(vsc, &sdp, sizeof(sdp));
|
||
|
||
if (drm_WARN_ON(&dev_priv->drm, len < 0))
|
||
return;
|
||
|
||
dig_port->write_infoframe(encoder, crtc_state, DP_SDP_VSC,
|
||
&sdp, len);
|
||
}
|
||
|
||
void intel_dp_set_infoframes(struct intel_encoder *encoder,
|
||
bool enable,
|
||
const struct intel_crtc_state *crtc_state,
|
||
const struct drm_connector_state *conn_state)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
i915_reg_t reg = HSW_TVIDEO_DIP_CTL(crtc_state->cpu_transcoder);
|
||
u32 dip_enable = VIDEO_DIP_ENABLE_AVI_HSW | VIDEO_DIP_ENABLE_GCP_HSW |
|
||
VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW |
|
||
VIDEO_DIP_ENABLE_SPD_HSW | VIDEO_DIP_ENABLE_DRM_GLK;
|
||
u32 val = intel_de_read(dev_priv, reg) & ~dip_enable;
|
||
|
||
/* TODO: Add DSC case (DIP_ENABLE_PPS) */
|
||
/* When PSR is enabled, this routine doesn't disable VSC DIP */
|
||
if (!crtc_state->has_psr)
|
||
val &= ~VIDEO_DIP_ENABLE_VSC_HSW;
|
||
|
||
intel_de_write(dev_priv, reg, val);
|
||
intel_de_posting_read(dev_priv, reg);
|
||
|
||
if (!enable)
|
||
return;
|
||
|
||
/* When PSR is enabled, VSC SDP is handled by PSR routine */
|
||
if (!crtc_state->has_psr)
|
||
intel_write_dp_sdp(encoder, crtc_state, DP_SDP_VSC);
|
||
|
||
intel_write_dp_sdp(encoder, crtc_state, HDMI_PACKET_TYPE_GAMUT_METADATA);
|
||
}
|
||
|
||
static int intel_dp_vsc_sdp_unpack(struct drm_dp_vsc_sdp *vsc,
|
||
const void *buffer, size_t size)
|
||
{
|
||
const struct dp_sdp *sdp = buffer;
|
||
|
||
if (size < sizeof(struct dp_sdp))
|
||
return -EINVAL;
|
||
|
||
memset(vsc, 0, sizeof(*vsc));
|
||
|
||
if (sdp->sdp_header.HB0 != 0)
|
||
return -EINVAL;
|
||
|
||
if (sdp->sdp_header.HB1 != DP_SDP_VSC)
|
||
return -EINVAL;
|
||
|
||
vsc->sdp_type = sdp->sdp_header.HB1;
|
||
vsc->revision = sdp->sdp_header.HB2;
|
||
vsc->length = sdp->sdp_header.HB3;
|
||
|
||
if ((sdp->sdp_header.HB2 == 0x2 && sdp->sdp_header.HB3 == 0x8) ||
|
||
(sdp->sdp_header.HB2 == 0x4 && sdp->sdp_header.HB3 == 0xe)) {
|
||
/*
|
||
* - HB2 = 0x2, HB3 = 0x8
|
||
* VSC SDP supporting 3D stereo + PSR
|
||
* - HB2 = 0x4, HB3 = 0xe
|
||
* VSC SDP supporting 3D stereo + PSR2 with Y-coordinate of
|
||
* first scan line of the SU region (applies to eDP v1.4b
|
||
* and higher).
|
||
*/
|
||
return 0;
|
||
} else if (sdp->sdp_header.HB2 == 0x5 && sdp->sdp_header.HB3 == 0x13) {
|
||
/*
|
||
* - HB2 = 0x5, HB3 = 0x13
|
||
* VSC SDP supporting 3D stereo + PSR2 + Pixel Encoding/Colorimetry
|
||
* Format.
|
||
*/
|
||
vsc->pixelformat = (sdp->db[16] >> 4) & 0xf;
|
||
vsc->colorimetry = sdp->db[16] & 0xf;
|
||
vsc->dynamic_range = (sdp->db[17] >> 7) & 0x1;
|
||
|
||
switch (sdp->db[17] & 0x7) {
|
||
case 0x0:
|
||
vsc->bpc = 6;
|
||
break;
|
||
case 0x1:
|
||
vsc->bpc = 8;
|
||
break;
|
||
case 0x2:
|
||
vsc->bpc = 10;
|
||
break;
|
||
case 0x3:
|
||
vsc->bpc = 12;
|
||
break;
|
||
case 0x4:
|
||
vsc->bpc = 16;
|
||
break;
|
||
default:
|
||
MISSING_CASE(sdp->db[17] & 0x7);
|
||
return -EINVAL;
|
||
}
|
||
|
||
vsc->content_type = sdp->db[18] & 0x7;
|
||
} else {
|
||
return -EINVAL;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int
|
||
intel_dp_hdr_metadata_infoframe_sdp_unpack(struct hdmi_drm_infoframe *drm_infoframe,
|
||
const void *buffer, size_t size)
|
||
{
|
||
int ret;
|
||
|
||
const struct dp_sdp *sdp = buffer;
|
||
|
||
if (size < sizeof(struct dp_sdp))
|
||
return -EINVAL;
|
||
|
||
if (sdp->sdp_header.HB0 != 0)
|
||
return -EINVAL;
|
||
|
||
if (sdp->sdp_header.HB1 != HDMI_INFOFRAME_TYPE_DRM)
|
||
return -EINVAL;
|
||
|
||
/*
|
||
* Least Significant Eight Bits of (Data Byte Count – 1)
|
||
* 1Dh (i.e., Data Byte Count = 30 bytes).
|
||
*/
|
||
if (sdp->sdp_header.HB2 != 0x1D)
|
||
return -EINVAL;
|
||
|
||
/* Most Significant Two Bits of (Data Byte Count – 1), Clear to 00b. */
|
||
if ((sdp->sdp_header.HB3 & 0x3) != 0)
|
||
return -EINVAL;
|
||
|
||
/* INFOFRAME SDP Version Number */
|
||
if (((sdp->sdp_header.HB3 >> 2) & 0x3f) != 0x13)
|
||
return -EINVAL;
|
||
|
||
/* CTA Header Byte 2 (INFOFRAME Version Number) */
|
||
if (sdp->db[0] != 1)
|
||
return -EINVAL;
|
||
|
||
/* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */
|
||
if (sdp->db[1] != HDMI_DRM_INFOFRAME_SIZE)
|
||
return -EINVAL;
|
||
|
||
ret = hdmi_drm_infoframe_unpack_only(drm_infoframe, &sdp->db[2],
|
||
HDMI_DRM_INFOFRAME_SIZE);
|
||
|
||
return ret;
|
||
}
|
||
|
||
static void intel_read_dp_vsc_sdp(struct intel_encoder *encoder,
|
||
struct intel_crtc_state *crtc_state,
|
||
struct drm_dp_vsc_sdp *vsc)
|
||
{
|
||
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
unsigned int type = DP_SDP_VSC;
|
||
struct dp_sdp sdp = {};
|
||
int ret;
|
||
|
||
/* When PSR is enabled, VSC SDP is handled by PSR routine */
|
||
if (crtc_state->has_psr)
|
||
return;
|
||
|
||
if ((crtc_state->infoframes.enable &
|
||
intel_hdmi_infoframe_enable(type)) == 0)
|
||
return;
|
||
|
||
dig_port->read_infoframe(encoder, crtc_state, type, &sdp, sizeof(sdp));
|
||
|
||
ret = intel_dp_vsc_sdp_unpack(vsc, &sdp, sizeof(sdp));
|
||
|
||
if (ret)
|
||
drm_dbg_kms(&dev_priv->drm, "Failed to unpack DP VSC SDP\n");
|
||
}
|
||
|
||
static void intel_read_dp_hdr_metadata_infoframe_sdp(struct intel_encoder *encoder,
|
||
struct intel_crtc_state *crtc_state,
|
||
struct hdmi_drm_infoframe *drm_infoframe)
|
||
{
|
||
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
unsigned int type = HDMI_PACKET_TYPE_GAMUT_METADATA;
|
||
struct dp_sdp sdp = {};
|
||
int ret;
|
||
|
||
if ((crtc_state->infoframes.enable &
|
||
intel_hdmi_infoframe_enable(type)) == 0)
|
||
return;
|
||
|
||
dig_port->read_infoframe(encoder, crtc_state, type, &sdp,
|
||
sizeof(sdp));
|
||
|
||
ret = intel_dp_hdr_metadata_infoframe_sdp_unpack(drm_infoframe, &sdp,
|
||
sizeof(sdp));
|
||
|
||
if (ret)
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"Failed to unpack DP HDR Metadata Infoframe SDP\n");
|
||
}
|
||
|
||
void intel_read_dp_sdp(struct intel_encoder *encoder,
|
||
struct intel_crtc_state *crtc_state,
|
||
unsigned int type)
|
||
{
|
||
switch (type) {
|
||
case DP_SDP_VSC:
|
||
intel_read_dp_vsc_sdp(encoder, crtc_state,
|
||
&crtc_state->infoframes.vsc);
|
||
break;
|
||
case HDMI_PACKET_TYPE_GAMUT_METADATA:
|
||
intel_read_dp_hdr_metadata_infoframe_sdp(encoder, crtc_state,
|
||
&crtc_state->infoframes.drm.drm);
|
||
break;
|
||
default:
|
||
MISSING_CASE(type);
|
||
break;
|
||
}
|
||
}
|
||
|
||
static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
int status = 0;
|
||
int test_link_rate;
|
||
u8 test_lane_count, test_link_bw;
|
||
/* (DP CTS 1.2)
|
||
* 4.3.1.11
|
||
*/
|
||
/* Read the TEST_LANE_COUNT and TEST_LINK_RTAE fields (DP CTS 3.1.4) */
|
||
status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LANE_COUNT,
|
||
&test_lane_count);
|
||
|
||
if (status <= 0) {
|
||
drm_dbg_kms(&i915->drm, "Lane count read failed\n");
|
||
return DP_TEST_NAK;
|
||
}
|
||
test_lane_count &= DP_MAX_LANE_COUNT_MASK;
|
||
|
||
status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE,
|
||
&test_link_bw);
|
||
if (status <= 0) {
|
||
drm_dbg_kms(&i915->drm, "Link Rate read failed\n");
|
||
return DP_TEST_NAK;
|
||
}
|
||
test_link_rate = drm_dp_bw_code_to_link_rate(test_link_bw);
|
||
|
||
/* Validate the requested link rate and lane count */
|
||
if (!intel_dp_link_params_valid(intel_dp, test_link_rate,
|
||
test_lane_count))
|
||
return DP_TEST_NAK;
|
||
|
||
intel_dp->compliance.test_lane_count = test_lane_count;
|
||
intel_dp->compliance.test_link_rate = test_link_rate;
|
||
|
||
return DP_TEST_ACK;
|
||
}
|
||
|
||
static u8 intel_dp_autotest_video_pattern(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
u8 test_pattern;
|
||
u8 test_misc;
|
||
__be16 h_width, v_height;
|
||
int status = 0;
|
||
|
||
/* Read the TEST_PATTERN (DP CTS 3.1.5) */
|
||
status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_PATTERN,
|
||
&test_pattern);
|
||
if (status <= 0) {
|
||
drm_dbg_kms(&i915->drm, "Test pattern read failed\n");
|
||
return DP_TEST_NAK;
|
||
}
|
||
if (test_pattern != DP_COLOR_RAMP)
|
||
return DP_TEST_NAK;
|
||
|
||
status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_H_WIDTH_HI,
|
||
&h_width, 2);
|
||
if (status <= 0) {
|
||
drm_dbg_kms(&i915->drm, "H Width read failed\n");
|
||
return DP_TEST_NAK;
|
||
}
|
||
|
||
status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_V_HEIGHT_HI,
|
||
&v_height, 2);
|
||
if (status <= 0) {
|
||
drm_dbg_kms(&i915->drm, "V Height read failed\n");
|
||
return DP_TEST_NAK;
|
||
}
|
||
|
||
status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_MISC0,
|
||
&test_misc);
|
||
if (status <= 0) {
|
||
drm_dbg_kms(&i915->drm, "TEST MISC read failed\n");
|
||
return DP_TEST_NAK;
|
||
}
|
||
if ((test_misc & DP_TEST_COLOR_FORMAT_MASK) != DP_COLOR_FORMAT_RGB)
|
||
return DP_TEST_NAK;
|
||
if (test_misc & DP_TEST_DYNAMIC_RANGE_CEA)
|
||
return DP_TEST_NAK;
|
||
switch (test_misc & DP_TEST_BIT_DEPTH_MASK) {
|
||
case DP_TEST_BIT_DEPTH_6:
|
||
intel_dp->compliance.test_data.bpc = 6;
|
||
break;
|
||
case DP_TEST_BIT_DEPTH_8:
|
||
intel_dp->compliance.test_data.bpc = 8;
|
||
break;
|
||
default:
|
||
return DP_TEST_NAK;
|
||
}
|
||
|
||
intel_dp->compliance.test_data.video_pattern = test_pattern;
|
||
intel_dp->compliance.test_data.hdisplay = be16_to_cpu(h_width);
|
||
intel_dp->compliance.test_data.vdisplay = be16_to_cpu(v_height);
|
||
/* Set test active flag here so userspace doesn't interrupt things */
|
||
intel_dp->compliance.test_active = true;
|
||
|
||
return DP_TEST_ACK;
|
||
}
|
||
|
||
static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
u8 test_result = DP_TEST_ACK;
|
||
struct intel_connector *intel_connector = intel_dp->attached_connector;
|
||
struct drm_connector *connector = &intel_connector->base;
|
||
|
||
if (intel_connector->detect_edid == NULL ||
|
||
connector->edid_corrupt ||
|
||
intel_dp->aux.i2c_defer_count > 6) {
|
||
/* Check EDID read for NACKs, DEFERs and corruption
|
||
* (DP CTS 1.2 Core r1.1)
|
||
* 4.2.2.4 : Failed EDID read, I2C_NAK
|
||
* 4.2.2.5 : Failed EDID read, I2C_DEFER
|
||
* 4.2.2.6 : EDID corruption detected
|
||
* Use failsafe mode for all cases
|
||
*/
|
||
if (intel_dp->aux.i2c_nack_count > 0 ||
|
||
intel_dp->aux.i2c_defer_count > 0)
|
||
drm_dbg_kms(&i915->drm,
|
||
"EDID read had %d NACKs, %d DEFERs\n",
|
||
intel_dp->aux.i2c_nack_count,
|
||
intel_dp->aux.i2c_defer_count);
|
||
intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_FAILSAFE;
|
||
} else {
|
||
struct edid *block = intel_connector->detect_edid;
|
||
|
||
/* We have to write the checksum
|
||
* of the last block read
|
||
*/
|
||
block += intel_connector->detect_edid->extensions;
|
||
|
||
if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_EDID_CHECKSUM,
|
||
block->checksum) <= 0)
|
||
drm_dbg_kms(&i915->drm,
|
||
"Failed to write EDID checksum\n");
|
||
|
||
test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE;
|
||
intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_PREFERRED;
|
||
}
|
||
|
||
/* Set test active flag here so userspace doesn't interrupt things */
|
||
intel_dp->compliance.test_active = true;
|
||
|
||
return test_result;
|
||
}
|
||
|
||
static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state)
|
||
{
|
||
struct drm_i915_private *dev_priv =
|
||
to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
|
||
struct drm_dp_phy_test_params *data =
|
||
&intel_dp->compliance.test_data.phytest;
|
||
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
|
||
enum pipe pipe = crtc->pipe;
|
||
u32 pattern_val;
|
||
|
||
switch (data->phy_pattern) {
|
||
case DP_PHY_TEST_PATTERN_NONE:
|
||
drm_dbg_kms(&dev_priv->drm, "Disable Phy Test Pattern\n");
|
||
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0);
|
||
break;
|
||
case DP_PHY_TEST_PATTERN_D10_2:
|
||
drm_dbg_kms(&dev_priv->drm, "Set D10.2 Phy Test Pattern\n");
|
||
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
|
||
DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2);
|
||
break;
|
||
case DP_PHY_TEST_PATTERN_ERROR_COUNT:
|
||
drm_dbg_kms(&dev_priv->drm, "Set Error Count Phy Test Pattern\n");
|
||
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
|
||
DDI_DP_COMP_CTL_ENABLE |
|
||
DDI_DP_COMP_CTL_SCRAMBLED_0);
|
||
break;
|
||
case DP_PHY_TEST_PATTERN_PRBS7:
|
||
drm_dbg_kms(&dev_priv->drm, "Set PRBS7 Phy Test Pattern\n");
|
||
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
|
||
DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7);
|
||
break;
|
||
case DP_PHY_TEST_PATTERN_80BIT_CUSTOM:
|
||
/*
|
||
* FIXME: Ideally pattern should come from DPCD 0x250. As
|
||
* current firmware of DPR-100 could not set it, so hardcoding
|
||
* now for complaince test.
|
||
*/
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"Set 80Bit Custom Phy Test Pattern 0x3e0f83e0 0x0f83e0f8 0x0000f83e\n");
|
||
pattern_val = 0x3e0f83e0;
|
||
intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 0), pattern_val);
|
||
pattern_val = 0x0f83e0f8;
|
||
intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 1), pattern_val);
|
||
pattern_val = 0x0000f83e;
|
||
intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 2), pattern_val);
|
||
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
|
||
DDI_DP_COMP_CTL_ENABLE |
|
||
DDI_DP_COMP_CTL_CUSTOM80);
|
||
break;
|
||
case DP_PHY_TEST_PATTERN_CP2520:
|
||
/*
|
||
* FIXME: Ideally pattern should come from DPCD 0x24A. As
|
||
* current firmware of DPR-100 could not set it, so hardcoding
|
||
* now for complaince test.
|
||
*/
|
||
drm_dbg_kms(&dev_priv->drm, "Set HBR2 compliance Phy Test Pattern\n");
|
||
pattern_val = 0xFB;
|
||
intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe),
|
||
DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 |
|
||
pattern_val);
|
||
break;
|
||
default:
|
||
WARN(1, "Invalid Phy Test Pattern\n");
|
||
}
|
||
}
|
||
|
||
static void
|
||
intel_dp_autotest_phy_ddi_disable(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state)
|
||
{
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
struct drm_device *dev = dig_port->base.base.dev;
|
||
struct drm_i915_private *dev_priv = to_i915(dev);
|
||
struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
|
||
enum pipe pipe = crtc->pipe;
|
||
u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
|
||
|
||
trans_ddi_func_ctl_value = intel_de_read(dev_priv,
|
||
TRANS_DDI_FUNC_CTL(pipe));
|
||
trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
|
||
dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
|
||
|
||
trans_ddi_func_ctl_value &= ~(TRANS_DDI_FUNC_ENABLE |
|
||
TGL_TRANS_DDI_PORT_MASK);
|
||
trans_conf_value &= ~PIPECONF_ENABLE;
|
||
dp_tp_ctl_value &= ~DP_TP_CTL_ENABLE;
|
||
|
||
intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
|
||
intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
|
||
trans_ddi_func_ctl_value);
|
||
intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
|
||
}
|
||
|
||
static void
|
||
intel_dp_autotest_phy_ddi_enable(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state)
|
||
{
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
struct drm_device *dev = dig_port->base.base.dev;
|
||
struct drm_i915_private *dev_priv = to_i915(dev);
|
||
enum port port = dig_port->base.port;
|
||
struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
|
||
enum pipe pipe = crtc->pipe;
|
||
u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
|
||
|
||
trans_ddi_func_ctl_value = intel_de_read(dev_priv,
|
||
TRANS_DDI_FUNC_CTL(pipe));
|
||
trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
|
||
dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
|
||
|
||
trans_ddi_func_ctl_value |= TRANS_DDI_FUNC_ENABLE |
|
||
TGL_TRANS_DDI_SELECT_PORT(port);
|
||
trans_conf_value |= PIPECONF_ENABLE;
|
||
dp_tp_ctl_value |= DP_TP_CTL_ENABLE;
|
||
|
||
intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
|
||
intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
|
||
intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
|
||
trans_ddi_func_ctl_value);
|
||
}
|
||
|
||
static void intel_dp_process_phy_request(struct intel_dp *intel_dp,
|
||
const struct intel_crtc_state *crtc_state)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct drm_dp_phy_test_params *data =
|
||
&intel_dp->compliance.test_data.phytest;
|
||
u8 link_status[DP_LINK_STATUS_SIZE];
|
||
|
||
if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, DP_PHY_DPRX,
|
||
link_status) < 0) {
|
||
drm_dbg_kms(&i915->drm, "failed to get link status\n");
|
||
return;
|
||
}
|
||
|
||
/* retrieve vswing & pre-emphasis setting */
|
||
intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX,
|
||
link_status);
|
||
|
||
intel_dp_autotest_phy_ddi_disable(intel_dp, crtc_state);
|
||
|
||
intel_dp_set_signal_levels(intel_dp, crtc_state, DP_PHY_DPRX);
|
||
|
||
intel_dp_phy_pattern_update(intel_dp, crtc_state);
|
||
|
||
intel_dp_autotest_phy_ddi_enable(intel_dp, crtc_state);
|
||
|
||
drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET,
|
||
intel_dp->train_set, crtc_state->lane_count);
|
||
|
||
drm_dp_set_phy_test_pattern(&intel_dp->aux, data,
|
||
link_status[DP_DPCD_REV]);
|
||
}
|
||
|
||
static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct drm_dp_phy_test_params *data =
|
||
&intel_dp->compliance.test_data.phytest;
|
||
|
||
if (drm_dp_get_phy_test_pattern(&intel_dp->aux, data)) {
|
||
drm_dbg_kms(&i915->drm, "DP Phy Test pattern AUX read failure\n");
|
||
return DP_TEST_NAK;
|
||
}
|
||
|
||
/* Set test active flag here so userspace doesn't interrupt things */
|
||
intel_dp->compliance.test_active = true;
|
||
|
||
return DP_TEST_ACK;
|
||
}
|
||
|
||
static void intel_dp_handle_test_request(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
u8 response = DP_TEST_NAK;
|
||
u8 request = 0;
|
||
int status;
|
||
|
||
status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_REQUEST, &request);
|
||
if (status <= 0) {
|
||
drm_dbg_kms(&i915->drm,
|
||
"Could not read test request from sink\n");
|
||
goto update_status;
|
||
}
|
||
|
||
switch (request) {
|
||
case DP_TEST_LINK_TRAINING:
|
||
drm_dbg_kms(&i915->drm, "LINK_TRAINING test requested\n");
|
||
response = intel_dp_autotest_link_training(intel_dp);
|
||
break;
|
||
case DP_TEST_LINK_VIDEO_PATTERN:
|
||
drm_dbg_kms(&i915->drm, "TEST_PATTERN test requested\n");
|
||
response = intel_dp_autotest_video_pattern(intel_dp);
|
||
break;
|
||
case DP_TEST_LINK_EDID_READ:
|
||
drm_dbg_kms(&i915->drm, "EDID test requested\n");
|
||
response = intel_dp_autotest_edid(intel_dp);
|
||
break;
|
||
case DP_TEST_LINK_PHY_TEST_PATTERN:
|
||
drm_dbg_kms(&i915->drm, "PHY_PATTERN test requested\n");
|
||
response = intel_dp_autotest_phy_pattern(intel_dp);
|
||
break;
|
||
default:
|
||
drm_dbg_kms(&i915->drm, "Invalid test request '%02x'\n",
|
||
request);
|
||
break;
|
||
}
|
||
|
||
if (response & DP_TEST_ACK)
|
||
intel_dp->compliance.test_type = request;
|
||
|
||
update_status:
|
||
status = drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, response);
|
||
if (status <= 0)
|
||
drm_dbg_kms(&i915->drm,
|
||
"Could not write test response to sink\n");
|
||
}
|
||
|
||
static bool intel_dp_link_ok(struct intel_dp *intel_dp,
|
||
u8 link_status[DP_LINK_STATUS_SIZE])
|
||
{
|
||
struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
|
||
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
|
||
bool uhbr = intel_dp->link_rate >= 1000000;
|
||
bool ok;
|
||
|
||
if (uhbr)
|
||
ok = drm_dp_128b132b_lane_channel_eq_done(link_status,
|
||
intel_dp->lane_count);
|
||
else
|
||
ok = drm_dp_channel_eq_ok(link_status, intel_dp->lane_count);
|
||
|
||
if (ok)
|
||
return true;
|
||
|
||
intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status);
|
||
drm_dbg_kms(&i915->drm,
|
||
"[ENCODER:%d:%s] %s link not ok, retraining\n",
|
||
encoder->base.base.id, encoder->base.name,
|
||
uhbr ? "128b/132b" : "8b/10b");
|
||
|
||
return false;
|
||
}
|
||
|
||
static void
|
||
intel_dp_mst_hpd_irq(struct intel_dp *intel_dp, u8 *esi, u8 *ack)
|
||
{
|
||
bool handled = false;
|
||
|
||
drm_dp_mst_hpd_irq(&intel_dp->mst_mgr, esi, &handled);
|
||
if (handled)
|
||
ack[1] |= esi[1] & (DP_DOWN_REP_MSG_RDY | DP_UP_REQ_MSG_RDY);
|
||
|
||
if (esi[1] & DP_CP_IRQ) {
|
||
intel_hdcp_handle_cp_irq(intel_dp->attached_connector);
|
||
ack[1] |= DP_CP_IRQ;
|
||
}
|
||
}
|
||
|
||
static bool intel_dp_mst_link_status(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
|
||
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
|
||
u8 link_status[DP_LINK_STATUS_SIZE] = {};
|
||
const size_t esi_link_status_size = DP_LINK_STATUS_SIZE - 2;
|
||
|
||
if (drm_dp_dpcd_read(&intel_dp->aux, DP_LANE0_1_STATUS_ESI, link_status,
|
||
esi_link_status_size) != esi_link_status_size) {
|
||
drm_err(&i915->drm,
|
||
"[ENCODER:%d:%s] Failed to read link status\n",
|
||
encoder->base.base.id, encoder->base.name);
|
||
return false;
|
||
}
|
||
|
||
return intel_dp_link_ok(intel_dp, link_status);
|
||
}
|
||
|
||
/**
|
||
* intel_dp_check_mst_status - service any pending MST interrupts, check link status
|
||
* @intel_dp: Intel DP struct
|
||
*
|
||
* Read any pending MST interrupts, call MST core to handle these and ack the
|
||
* interrupts. Check if the main and AUX link state is ok.
|
||
*
|
||
* Returns:
|
||
* - %true if pending interrupts were serviced (or no interrupts were
|
||
* pending) w/o detecting an error condition.
|
||
* - %false if an error condition - like AUX failure or a loss of link - is
|
||
* detected, which needs servicing from the hotplug work.
|
||
*/
|
||
static bool
|
||
intel_dp_check_mst_status(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
bool link_ok = true;
|
||
|
||
drm_WARN_ON_ONCE(&i915->drm, intel_dp->active_mst_links < 0);
|
||
|
||
for (;;) {
|
||
u8 esi[4] = {};
|
||
u8 ack[4] = {};
|
||
|
||
if (!intel_dp_get_sink_irq_esi(intel_dp, esi)) {
|
||
drm_dbg_kms(&i915->drm,
|
||
"failed to get ESI - device may have failed\n");
|
||
link_ok = false;
|
||
|
||
break;
|
||
}
|
||
|
||
drm_dbg_kms(&i915->drm, "DPRX ESI: %4ph\n", esi);
|
||
|
||
if (intel_dp->active_mst_links > 0 && link_ok &&
|
||
esi[3] & LINK_STATUS_CHANGED) {
|
||
if (!intel_dp_mst_link_status(intel_dp))
|
||
link_ok = false;
|
||
ack[3] |= LINK_STATUS_CHANGED;
|
||
}
|
||
|
||
intel_dp_mst_hpd_irq(intel_dp, esi, ack);
|
||
|
||
if (!memchr_inv(ack, 0, sizeof(ack)))
|
||
break;
|
||
|
||
if (!intel_dp_ack_sink_irq_esi(intel_dp, ack))
|
||
drm_dbg_kms(&i915->drm, "Failed to ack ESI\n");
|
||
}
|
||
|
||
return link_ok;
|
||
}
|
||
|
||
static void
|
||
intel_dp_handle_hdmi_link_status_change(struct intel_dp *intel_dp)
|
||
{
|
||
bool is_active;
|
||
u8 buf = 0;
|
||
|
||
is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux);
|
||
if (intel_dp->frl.is_trained && !is_active) {
|
||
if (drm_dp_dpcd_readb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf) < 0)
|
||
return;
|
||
|
||
buf &= ~DP_PCON_ENABLE_HDMI_LINK;
|
||
if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf) < 0)
|
||
return;
|
||
|
||
drm_dp_pcon_hdmi_frl_link_error_count(&intel_dp->aux, &intel_dp->attached_connector->base);
|
||
|
||
intel_dp->frl.is_trained = false;
|
||
|
||
/* Restart FRL training or fall back to TMDS mode */
|
||
intel_dp_check_frl_training(intel_dp);
|
||
}
|
||
}
|
||
|
||
static bool
|
||
intel_dp_needs_link_retrain(struct intel_dp *intel_dp)
|
||
{
|
||
u8 link_status[DP_LINK_STATUS_SIZE];
|
||
|
||
if (!intel_dp->link_trained)
|
||
return false;
|
||
|
||
/*
|
||
* While PSR source HW is enabled, it will control main-link sending
|
||
* frames, enabling and disabling it so trying to do a retrain will fail
|
||
* as the link would or not be on or it could mix training patterns
|
||
* and frame data at the same time causing retrain to fail.
|
||
* Also when exiting PSR, HW will retrain the link anyways fixing
|
||
* any link status error.
|
||
*/
|
||
if (intel_psr_enabled(intel_dp))
|
||
return false;
|
||
|
||
if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, DP_PHY_DPRX,
|
||
link_status) < 0)
|
||
return false;
|
||
|
||
/*
|
||
* Validate the cached values of intel_dp->link_rate and
|
||
* intel_dp->lane_count before attempting to retrain.
|
||
*
|
||
* FIXME would be nice to user the crtc state here, but since
|
||
* we need to call this from the short HPD handler that seems
|
||
* a bit hard.
|
||
*/
|
||
if (!intel_dp_link_params_valid(intel_dp, intel_dp->link_rate,
|
||
intel_dp->lane_count))
|
||
return false;
|
||
|
||
/* Retrain if link not ok */
|
||
return !intel_dp_link_ok(intel_dp, link_status);
|
||
}
|
||
|
||
static bool intel_dp_has_connector(struct intel_dp *intel_dp,
|
||
const struct drm_connector_state *conn_state)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct intel_encoder *encoder;
|
||
enum pipe pipe;
|
||
|
||
if (!conn_state->best_encoder)
|
||
return false;
|
||
|
||
/* SST */
|
||
encoder = &dp_to_dig_port(intel_dp)->base;
|
||
if (conn_state->best_encoder == &encoder->base)
|
||
return true;
|
||
|
||
/* MST */
|
||
for_each_pipe(i915, pipe) {
|
||
encoder = &intel_dp->mst_encoders[pipe]->base;
|
||
if (conn_state->best_encoder == &encoder->base)
|
||
return true;
|
||
}
|
||
|
||
return false;
|
||
}
|
||
|
||
static int intel_dp_prep_link_retrain(struct intel_dp *intel_dp,
|
||
struct drm_modeset_acquire_ctx *ctx,
|
||
u8 *pipe_mask)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct drm_connector_list_iter conn_iter;
|
||
struct intel_connector *connector;
|
||
int ret = 0;
|
||
|
||
*pipe_mask = 0;
|
||
|
||
if (!intel_dp_needs_link_retrain(intel_dp))
|
||
return 0;
|
||
|
||
drm_connector_list_iter_begin(&i915->drm, &conn_iter);
|
||
for_each_intel_connector_iter(connector, &conn_iter) {
|
||
struct drm_connector_state *conn_state =
|
||
connector->base.state;
|
||
struct intel_crtc_state *crtc_state;
|
||
struct intel_crtc *crtc;
|
||
|
||
if (!intel_dp_has_connector(intel_dp, conn_state))
|
||
continue;
|
||
|
||
crtc = to_intel_crtc(conn_state->crtc);
|
||
if (!crtc)
|
||
continue;
|
||
|
||
ret = drm_modeset_lock(&crtc->base.mutex, ctx);
|
||
if (ret)
|
||
break;
|
||
|
||
crtc_state = to_intel_crtc_state(crtc->base.state);
|
||
|
||
drm_WARN_ON(&i915->drm, !intel_crtc_has_dp_encoder(crtc_state));
|
||
|
||
if (!crtc_state->hw.active)
|
||
continue;
|
||
|
||
if (conn_state->commit &&
|
||
!try_wait_for_completion(&conn_state->commit->hw_done))
|
||
continue;
|
||
|
||
*pipe_mask |= BIT(crtc->pipe);
|
||
}
|
||
drm_connector_list_iter_end(&conn_iter);
|
||
|
||
if (!intel_dp_needs_link_retrain(intel_dp))
|
||
*pipe_mask = 0;
|
||
|
||
return ret;
|
||
}
|
||
|
||
static bool intel_dp_is_connected(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
|
||
return connector->base.status == connector_status_connected ||
|
||
intel_dp->is_mst;
|
||
}
|
||
|
||
int intel_dp_retrain_link(struct intel_encoder *encoder,
|
||
struct drm_modeset_acquire_ctx *ctx)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
|
||
struct intel_crtc *crtc;
|
||
u8 pipe_mask;
|
||
int ret;
|
||
|
||
if (!intel_dp_is_connected(intel_dp))
|
||
return 0;
|
||
|
||
ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,
|
||
ctx);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ret = intel_dp_prep_link_retrain(intel_dp, ctx, &pipe_mask);
|
||
if (ret)
|
||
return ret;
|
||
|
||
if (pipe_mask == 0)
|
||
return 0;
|
||
|
||
drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] retraining link\n",
|
||
encoder->base.base.id, encoder->base.name);
|
||
|
||
for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) {
|
||
const struct intel_crtc_state *crtc_state =
|
||
to_intel_crtc_state(crtc->base.state);
|
||
|
||
/* Suppress underruns caused by re-training */
|
||
intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false);
|
||
if (crtc_state->has_pch_encoder)
|
||
intel_set_pch_fifo_underrun_reporting(dev_priv,
|
||
intel_crtc_pch_transcoder(crtc), false);
|
||
}
|
||
|
||
for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) {
|
||
const struct intel_crtc_state *crtc_state =
|
||
to_intel_crtc_state(crtc->base.state);
|
||
|
||
/* retrain on the MST master transcoder */
|
||
if (DISPLAY_VER(dev_priv) >= 12 &&
|
||
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) &&
|
||
!intel_dp_mst_is_master_trans(crtc_state))
|
||
continue;
|
||
|
||
intel_dp_check_frl_training(intel_dp);
|
||
intel_dp_pcon_dsc_configure(intel_dp, crtc_state);
|
||
intel_dp_start_link_train(intel_dp, crtc_state);
|
||
intel_dp_stop_link_train(intel_dp, crtc_state);
|
||
break;
|
||
}
|
||
|
||
for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) {
|
||
const struct intel_crtc_state *crtc_state =
|
||
to_intel_crtc_state(crtc->base.state);
|
||
|
||
/* Keep underrun reporting disabled until things are stable */
|
||
intel_crtc_wait_for_next_vblank(crtc);
|
||
|
||
intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);
|
||
if (crtc_state->has_pch_encoder)
|
||
intel_set_pch_fifo_underrun_reporting(dev_priv,
|
||
intel_crtc_pch_transcoder(crtc), true);
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int intel_dp_prep_phy_test(struct intel_dp *intel_dp,
|
||
struct drm_modeset_acquire_ctx *ctx,
|
||
u8 *pipe_mask)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct drm_connector_list_iter conn_iter;
|
||
struct intel_connector *connector;
|
||
int ret = 0;
|
||
|
||
*pipe_mask = 0;
|
||
|
||
drm_connector_list_iter_begin(&i915->drm, &conn_iter);
|
||
for_each_intel_connector_iter(connector, &conn_iter) {
|
||
struct drm_connector_state *conn_state =
|
||
connector->base.state;
|
||
struct intel_crtc_state *crtc_state;
|
||
struct intel_crtc *crtc;
|
||
|
||
if (!intel_dp_has_connector(intel_dp, conn_state))
|
||
continue;
|
||
|
||
crtc = to_intel_crtc(conn_state->crtc);
|
||
if (!crtc)
|
||
continue;
|
||
|
||
ret = drm_modeset_lock(&crtc->base.mutex, ctx);
|
||
if (ret)
|
||
break;
|
||
|
||
crtc_state = to_intel_crtc_state(crtc->base.state);
|
||
|
||
drm_WARN_ON(&i915->drm, !intel_crtc_has_dp_encoder(crtc_state));
|
||
|
||
if (!crtc_state->hw.active)
|
||
continue;
|
||
|
||
if (conn_state->commit &&
|
||
!try_wait_for_completion(&conn_state->commit->hw_done))
|
||
continue;
|
||
|
||
*pipe_mask |= BIT(crtc->pipe);
|
||
}
|
||
drm_connector_list_iter_end(&conn_iter);
|
||
|
||
return ret;
|
||
}
|
||
|
||
static int intel_dp_do_phy_test(struct intel_encoder *encoder,
|
||
struct drm_modeset_acquire_ctx *ctx)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
|
||
struct intel_crtc *crtc;
|
||
u8 pipe_mask;
|
||
int ret;
|
||
|
||
ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,
|
||
ctx);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ret = intel_dp_prep_phy_test(intel_dp, ctx, &pipe_mask);
|
||
if (ret)
|
||
return ret;
|
||
|
||
if (pipe_mask == 0)
|
||
return 0;
|
||
|
||
drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] PHY test\n",
|
||
encoder->base.base.id, encoder->base.name);
|
||
|
||
for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) {
|
||
const struct intel_crtc_state *crtc_state =
|
||
to_intel_crtc_state(crtc->base.state);
|
||
|
||
/* test on the MST master transcoder */
|
||
if (DISPLAY_VER(dev_priv) >= 12 &&
|
||
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) &&
|
||
!intel_dp_mst_is_master_trans(crtc_state))
|
||
continue;
|
||
|
||
intel_dp_process_phy_request(intel_dp, crtc_state);
|
||
break;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
void intel_dp_phy_test(struct intel_encoder *encoder)
|
||
{
|
||
struct drm_modeset_acquire_ctx ctx;
|
||
int ret;
|
||
|
||
drm_modeset_acquire_init(&ctx, 0);
|
||
|
||
for (;;) {
|
||
ret = intel_dp_do_phy_test(encoder, &ctx);
|
||
|
||
if (ret == -EDEADLK) {
|
||
drm_modeset_backoff(&ctx);
|
||
continue;
|
||
}
|
||
|
||
break;
|
||
}
|
||
|
||
drm_modeset_drop_locks(&ctx);
|
||
drm_modeset_acquire_fini(&ctx);
|
||
drm_WARN(encoder->base.dev, ret,
|
||
"Acquiring modeset locks failed with %i\n", ret);
|
||
}
|
||
|
||
static void intel_dp_check_device_service_irq(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
u8 val;
|
||
|
||
if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
|
||
return;
|
||
|
||
if (drm_dp_dpcd_readb(&intel_dp->aux,
|
||
DP_DEVICE_SERVICE_IRQ_VECTOR, &val) != 1 || !val)
|
||
return;
|
||
|
||
drm_dp_dpcd_writeb(&intel_dp->aux, DP_DEVICE_SERVICE_IRQ_VECTOR, val);
|
||
|
||
if (val & DP_AUTOMATED_TEST_REQUEST)
|
||
intel_dp_handle_test_request(intel_dp);
|
||
|
||
if (val & DP_CP_IRQ)
|
||
intel_hdcp_handle_cp_irq(intel_dp->attached_connector);
|
||
|
||
if (val & DP_SINK_SPECIFIC_IRQ)
|
||
drm_dbg_kms(&i915->drm, "Sink specific irq unhandled\n");
|
||
}
|
||
|
||
static void intel_dp_check_link_service_irq(struct intel_dp *intel_dp)
|
||
{
|
||
u8 val;
|
||
|
||
if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
|
||
return;
|
||
|
||
if (drm_dp_dpcd_readb(&intel_dp->aux,
|
||
DP_LINK_SERVICE_IRQ_VECTOR_ESI0, &val) != 1 || !val)
|
||
return;
|
||
|
||
if (drm_dp_dpcd_writeb(&intel_dp->aux,
|
||
DP_LINK_SERVICE_IRQ_VECTOR_ESI0, val) != 1)
|
||
return;
|
||
|
||
if (val & HDMI_LINK_STATUS_CHANGED)
|
||
intel_dp_handle_hdmi_link_status_change(intel_dp);
|
||
}
|
||
|
||
/*
|
||
* According to DP spec
|
||
* 5.1.2:
|
||
* 1. Read DPCD
|
||
* 2. Configure link according to Receiver Capabilities
|
||
* 3. Use Link Training from 2.5.3.3 and 3.5.1.3
|
||
* 4. Check link status on receipt of hot-plug interrupt
|
||
*
|
||
* intel_dp_short_pulse - handles short pulse interrupts
|
||
* when full detection is not required.
|
||
* Returns %true if short pulse is handled and full detection
|
||
* is NOT required and %false otherwise.
|
||
*/
|
||
static bool
|
||
intel_dp_short_pulse(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
|
||
u8 old_sink_count = intel_dp->sink_count;
|
||
bool ret;
|
||
|
||
/*
|
||
* Clearing compliance test variables to allow capturing
|
||
* of values for next automated test request.
|
||
*/
|
||
memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance));
|
||
|
||
/*
|
||
* Now read the DPCD to see if it's actually running
|
||
* If the current value of sink count doesn't match with
|
||
* the value that was stored earlier or dpcd read failed
|
||
* we need to do full detection
|
||
*/
|
||
ret = intel_dp_get_dpcd(intel_dp);
|
||
|
||
if ((old_sink_count != intel_dp->sink_count) || !ret) {
|
||
/* No need to proceed if we are going to do full detect */
|
||
return false;
|
||
}
|
||
|
||
intel_dp_check_device_service_irq(intel_dp);
|
||
intel_dp_check_link_service_irq(intel_dp);
|
||
|
||
/* Handle CEC interrupts, if any */
|
||
drm_dp_cec_irq(&intel_dp->aux);
|
||
|
||
/* defer to the hotplug work for link retraining if needed */
|
||
if (intel_dp_needs_link_retrain(intel_dp))
|
||
return false;
|
||
|
||
intel_psr_short_pulse(intel_dp);
|
||
|
||
switch (intel_dp->compliance.test_type) {
|
||
case DP_TEST_LINK_TRAINING:
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"Link Training Compliance Test requested\n");
|
||
/* Send a Hotplug Uevent to userspace to start modeset */
|
||
drm_kms_helper_hotplug_event(&dev_priv->drm);
|
||
break;
|
||
case DP_TEST_LINK_PHY_TEST_PATTERN:
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"PHY test pattern Compliance Test requested\n");
|
||
/*
|
||
* Schedule long hpd to do the test
|
||
*
|
||
* FIXME get rid of the ad-hoc phy test modeset code
|
||
* and properly incorporate it into the normal modeset.
|
||
*/
|
||
return false;
|
||
}
|
||
|
||
return true;
|
||
}
|
||
|
||
/* XXX this is probably wrong for multiple downstream ports */
|
||
static enum drm_connector_status
|
||
intel_dp_detect_dpcd(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
u8 *dpcd = intel_dp->dpcd;
|
||
u8 type;
|
||
|
||
if (drm_WARN_ON(&i915->drm, intel_dp_is_edp(intel_dp)))
|
||
return connector_status_connected;
|
||
|
||
lspcon_resume(dig_port);
|
||
|
||
if (!intel_dp_get_dpcd(intel_dp))
|
||
return connector_status_disconnected;
|
||
|
||
/* if there's no downstream port, we're done */
|
||
if (!drm_dp_is_branch(dpcd))
|
||
return connector_status_connected;
|
||
|
||
/* If we're HPD-aware, SINK_COUNT changes dynamically */
|
||
if (intel_dp_has_sink_count(intel_dp) &&
|
||
intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) {
|
||
return intel_dp->sink_count ?
|
||
connector_status_connected : connector_status_disconnected;
|
||
}
|
||
|
||
if (intel_dp_can_mst(intel_dp))
|
||
return connector_status_connected;
|
||
|
||
/* If no HPD, poke DDC gently */
|
||
if (drm_probe_ddc(&intel_dp->aux.ddc))
|
||
return connector_status_connected;
|
||
|
||
/* Well we tried, say unknown for unreliable port types */
|
||
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
|
||
type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
|
||
if (type == DP_DS_PORT_TYPE_VGA ||
|
||
type == DP_DS_PORT_TYPE_NON_EDID)
|
||
return connector_status_unknown;
|
||
} else {
|
||
type = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] &
|
||
DP_DWN_STRM_PORT_TYPE_MASK;
|
||
if (type == DP_DWN_STRM_PORT_TYPE_ANALOG ||
|
||
type == DP_DWN_STRM_PORT_TYPE_OTHER)
|
||
return connector_status_unknown;
|
||
}
|
||
|
||
/* Anything else is out of spec, warn and ignore */
|
||
drm_dbg_kms(&i915->drm, "Broken DP branch device, ignoring\n");
|
||
return connector_status_disconnected;
|
||
}
|
||
|
||
static enum drm_connector_status
|
||
edp_detect(struct intel_dp *intel_dp)
|
||
{
|
||
return connector_status_connected;
|
||
}
|
||
|
||
/*
|
||
* intel_digital_port_connected - is the specified port connected?
|
||
* @encoder: intel_encoder
|
||
*
|
||
* In cases where there's a connector physically connected but it can't be used
|
||
* by our hardware we also return false, since the rest of the driver should
|
||
* pretty much treat the port as disconnected. This is relevant for type-C
|
||
* (starting on ICL) where there's ownership involved.
|
||
*
|
||
* Return %true if port is connected, %false otherwise.
|
||
*/
|
||
bool intel_digital_port_connected(struct intel_encoder *encoder)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
||
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
|
||
bool is_connected = false;
|
||
intel_wakeref_t wakeref;
|
||
|
||
with_intel_display_power(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref)
|
||
is_connected = dig_port->connected(encoder);
|
||
|
||
return is_connected;
|
||
}
|
||
|
||
static struct edid *
|
||
intel_dp_get_edid(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_connector *intel_connector = intel_dp->attached_connector;
|
||
|
||
/* use cached edid if we have one */
|
||
if (intel_connector->edid) {
|
||
/* invalid edid */
|
||
if (IS_ERR(intel_connector->edid))
|
||
return NULL;
|
||
|
||
return drm_edid_duplicate(intel_connector->edid);
|
||
} else
|
||
return drm_get_edid(&intel_connector->base,
|
||
&intel_dp->aux.ddc);
|
||
}
|
||
|
||
static void
|
||
intel_dp_update_dfp(struct intel_dp *intel_dp,
|
||
const struct edid *edid)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
|
||
intel_dp->dfp.max_bpc =
|
||
drm_dp_downstream_max_bpc(intel_dp->dpcd,
|
||
intel_dp->downstream_ports, edid);
|
||
|
||
intel_dp->dfp.max_dotclock =
|
||
drm_dp_downstream_max_dotclock(intel_dp->dpcd,
|
||
intel_dp->downstream_ports);
|
||
|
||
intel_dp->dfp.min_tmds_clock =
|
||
drm_dp_downstream_min_tmds_clock(intel_dp->dpcd,
|
||
intel_dp->downstream_ports,
|
||
edid);
|
||
intel_dp->dfp.max_tmds_clock =
|
||
drm_dp_downstream_max_tmds_clock(intel_dp->dpcd,
|
||
intel_dp->downstream_ports,
|
||
edid);
|
||
|
||
intel_dp->dfp.pcon_max_frl_bw =
|
||
drm_dp_get_pcon_max_frl_bw(intel_dp->dpcd,
|
||
intel_dp->downstream_ports);
|
||
|
||
drm_dbg_kms(&i915->drm,
|
||
"[CONNECTOR:%d:%s] DFP max bpc %d, max dotclock %d, TMDS clock %d-%d, PCON Max FRL BW %dGbps\n",
|
||
connector->base.base.id, connector->base.name,
|
||
intel_dp->dfp.max_bpc,
|
||
intel_dp->dfp.max_dotclock,
|
||
intel_dp->dfp.min_tmds_clock,
|
||
intel_dp->dfp.max_tmds_clock,
|
||
intel_dp->dfp.pcon_max_frl_bw);
|
||
|
||
intel_dp_get_pcon_dsc_cap(intel_dp);
|
||
}
|
||
|
||
static void
|
||
intel_dp_update_420(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420, rgb_to_ycbcr;
|
||
|
||
/* No YCbCr output support on gmch platforms */
|
||
if (HAS_GMCH(i915))
|
||
return;
|
||
|
||
/*
|
||
* ILK doesn't seem capable of DP YCbCr output. The
|
||
* displayed image is severly corrupted. SNB+ is fine.
|
||
*/
|
||
if (IS_IRONLAKE(i915))
|
||
return;
|
||
|
||
is_branch = drm_dp_is_branch(intel_dp->dpcd);
|
||
ycbcr_420_passthrough =
|
||
drm_dp_downstream_420_passthrough(intel_dp->dpcd,
|
||
intel_dp->downstream_ports);
|
||
/* on-board LSPCON always assumed to support 4:4:4->4:2:0 conversion */
|
||
ycbcr_444_to_420 =
|
||
dp_to_dig_port(intel_dp)->lspcon.active ||
|
||
drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd,
|
||
intel_dp->downstream_ports);
|
||
rgb_to_ycbcr = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd,
|
||
intel_dp->downstream_ports,
|
||
DP_DS_HDMI_BT709_RGB_YCBCR_CONV);
|
||
|
||
if (DISPLAY_VER(i915) >= 11) {
|
||
/* Let PCON convert from RGB->YCbCr if possible */
|
||
if (is_branch && rgb_to_ycbcr && ycbcr_444_to_420) {
|
||
intel_dp->dfp.rgb_to_ycbcr = true;
|
||
intel_dp->dfp.ycbcr_444_to_420 = true;
|
||
connector->base.ycbcr_420_allowed = true;
|
||
} else {
|
||
/* Prefer 4:2:0 passthrough over 4:4:4->4:2:0 conversion */
|
||
intel_dp->dfp.ycbcr_444_to_420 =
|
||
ycbcr_444_to_420 && !ycbcr_420_passthrough;
|
||
|
||
connector->base.ycbcr_420_allowed =
|
||
!is_branch || ycbcr_444_to_420 || ycbcr_420_passthrough;
|
||
}
|
||
} else {
|
||
/* 4:4:4->4:2:0 conversion is the only way */
|
||
intel_dp->dfp.ycbcr_444_to_420 = ycbcr_444_to_420;
|
||
|
||
connector->base.ycbcr_420_allowed = ycbcr_444_to_420;
|
||
}
|
||
|
||
drm_dbg_kms(&i915->drm,
|
||
"[CONNECTOR:%d:%s] RGB->YcbCr conversion? %s, YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n",
|
||
connector->base.base.id, connector->base.name,
|
||
str_yes_no(intel_dp->dfp.rgb_to_ycbcr),
|
||
str_yes_no(connector->base.ycbcr_420_allowed),
|
||
str_yes_no(intel_dp->dfp.ycbcr_444_to_420));
|
||
}
|
||
|
||
static void
|
||
intel_dp_set_edid(struct intel_dp *intel_dp)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
struct edid *edid;
|
||
bool vrr_capable;
|
||
|
||
intel_dp_unset_edid(intel_dp);
|
||
edid = intel_dp_get_edid(intel_dp);
|
||
connector->detect_edid = edid;
|
||
|
||
vrr_capable = intel_vrr_is_capable(connector);
|
||
drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] VRR capable: %s\n",
|
||
connector->base.base.id, connector->base.name, str_yes_no(vrr_capable));
|
||
drm_connector_set_vrr_capable_property(&connector->base, vrr_capable);
|
||
|
||
intel_dp_update_dfp(intel_dp, edid);
|
||
intel_dp_update_420(intel_dp);
|
||
|
||
if (edid && edid->input & DRM_EDID_INPUT_DIGITAL) {
|
||
intel_dp->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
|
||
intel_dp->has_audio = drm_detect_monitor_audio(edid);
|
||
}
|
||
|
||
drm_dp_cec_set_edid(&intel_dp->aux, edid);
|
||
}
|
||
|
||
static void
|
||
intel_dp_unset_edid(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
|
||
drm_dp_cec_unset_edid(&intel_dp->aux);
|
||
kfree(connector->detect_edid);
|
||
connector->detect_edid = NULL;
|
||
|
||
intel_dp->has_hdmi_sink = false;
|
||
intel_dp->has_audio = false;
|
||
|
||
intel_dp->dfp.max_bpc = 0;
|
||
intel_dp->dfp.max_dotclock = 0;
|
||
intel_dp->dfp.min_tmds_clock = 0;
|
||
intel_dp->dfp.max_tmds_clock = 0;
|
||
|
||
intel_dp->dfp.pcon_max_frl_bw = 0;
|
||
|
||
intel_dp->dfp.ycbcr_444_to_420 = false;
|
||
connector->base.ycbcr_420_allowed = false;
|
||
|
||
drm_connector_set_vrr_capable_property(&connector->base,
|
||
false);
|
||
}
|
||
|
||
static int
|
||
intel_dp_detect(struct drm_connector *connector,
|
||
struct drm_modeset_acquire_ctx *ctx,
|
||
bool force)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(connector->dev);
|
||
struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
struct intel_encoder *encoder = &dig_port->base;
|
||
enum drm_connector_status status;
|
||
|
||
drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n",
|
||
connector->base.id, connector->name);
|
||
drm_WARN_ON(&dev_priv->drm,
|
||
!drm_modeset_is_locked(&dev_priv->drm.mode_config.connection_mutex));
|
||
|
||
if (!INTEL_DISPLAY_ENABLED(dev_priv))
|
||
return connector_status_disconnected;
|
||
|
||
/* Can't disconnect eDP */
|
||
if (intel_dp_is_edp(intel_dp))
|
||
status = edp_detect(intel_dp);
|
||
else if (intel_digital_port_connected(encoder))
|
||
status = intel_dp_detect_dpcd(intel_dp);
|
||
else
|
||
status = connector_status_disconnected;
|
||
|
||
if (status == connector_status_disconnected) {
|
||
memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance));
|
||
memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd));
|
||
|
||
if (intel_dp->is_mst) {
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"MST device may have disappeared %d vs %d\n",
|
||
intel_dp->is_mst,
|
||
intel_dp->mst_mgr.mst_state);
|
||
intel_dp->is_mst = false;
|
||
drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
|
||
intel_dp->is_mst);
|
||
}
|
||
|
||
goto out;
|
||
}
|
||
|
||
/* Read DP Sink DSC Cap DPCD regs for DP v1.4 */
|
||
if (DISPLAY_VER(dev_priv) >= 11)
|
||
intel_dp_get_dsc_sink_cap(intel_dp);
|
||
|
||
intel_dp_configure_mst(intel_dp);
|
||
|
||
/*
|
||
* TODO: Reset link params when switching to MST mode, until MST
|
||
* supports link training fallback params.
|
||
*/
|
||
if (intel_dp->reset_link_params || intel_dp->is_mst) {
|
||
intel_dp_reset_max_link_params(intel_dp);
|
||
intel_dp->reset_link_params = false;
|
||
}
|
||
|
||
intel_dp_print_rates(intel_dp);
|
||
|
||
if (intel_dp->is_mst) {
|
||
/*
|
||
* If we are in MST mode then this connector
|
||
* won't appear connected or have anything
|
||
* with EDID on it
|
||
*/
|
||
status = connector_status_disconnected;
|
||
goto out;
|
||
}
|
||
|
||
/*
|
||
* Some external monitors do not signal loss of link synchronization
|
||
* with an IRQ_HPD, so force a link status check.
|
||
*/
|
||
if (!intel_dp_is_edp(intel_dp)) {
|
||
int ret;
|
||
|
||
ret = intel_dp_retrain_link(encoder, ctx);
|
||
if (ret)
|
||
return ret;
|
||
}
|
||
|
||
/*
|
||
* Clearing NACK and defer counts to get their exact values
|
||
* while reading EDID which are required by Compliance tests
|
||
* 4.2.2.4 and 4.2.2.5
|
||
*/
|
||
intel_dp->aux.i2c_nack_count = 0;
|
||
intel_dp->aux.i2c_defer_count = 0;
|
||
|
||
intel_dp_set_edid(intel_dp);
|
||
if (intel_dp_is_edp(intel_dp) ||
|
||
to_intel_connector(connector)->detect_edid)
|
||
status = connector_status_connected;
|
||
|
||
intel_dp_check_device_service_irq(intel_dp);
|
||
|
||
out:
|
||
if (status != connector_status_connected && !intel_dp->is_mst)
|
||
intel_dp_unset_edid(intel_dp);
|
||
|
||
/*
|
||
* Make sure the refs for power wells enabled during detect are
|
||
* dropped to avoid a new detect cycle triggered by HPD polling.
|
||
*/
|
||
intel_display_power_flush_work(dev_priv);
|
||
|
||
if (!intel_dp_is_edp(intel_dp))
|
||
drm_dp_set_subconnector_property(connector,
|
||
status,
|
||
intel_dp->dpcd,
|
||
intel_dp->downstream_ports);
|
||
return status;
|
||
}
|
||
|
||
static void
|
||
intel_dp_force(struct drm_connector *connector)
|
||
{
|
||
struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
struct intel_encoder *intel_encoder = &dig_port->base;
|
||
struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
|
||
enum intel_display_power_domain aux_domain =
|
||
intel_aux_power_domain(dig_port);
|
||
intel_wakeref_t wakeref;
|
||
|
||
drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n",
|
||
connector->base.id, connector->name);
|
||
intel_dp_unset_edid(intel_dp);
|
||
|
||
if (connector->status != connector_status_connected)
|
||
return;
|
||
|
||
wakeref = intel_display_power_get(dev_priv, aux_domain);
|
||
|
||
intel_dp_set_edid(intel_dp);
|
||
|
||
intel_display_power_put(dev_priv, aux_domain, wakeref);
|
||
}
|
||
|
||
static int intel_dp_get_modes(struct drm_connector *connector)
|
||
{
|
||
struct intel_connector *intel_connector = to_intel_connector(connector);
|
||
struct edid *edid;
|
||
int num_modes = 0;
|
||
|
||
edid = intel_connector->detect_edid;
|
||
if (edid)
|
||
num_modes = intel_connector_update_modes(connector, edid);
|
||
|
||
/* Also add fixed mode, which may or may not be present in EDID */
|
||
if (intel_dp_is_edp(intel_attached_dp(intel_connector)))
|
||
num_modes += intel_panel_get_modes(intel_connector);
|
||
|
||
if (num_modes)
|
||
return num_modes;
|
||
|
||
if (!edid) {
|
||
struct intel_dp *intel_dp = intel_attached_dp(intel_connector);
|
||
struct drm_display_mode *mode;
|
||
|
||
mode = drm_dp_downstream_mode(connector->dev,
|
||
intel_dp->dpcd,
|
||
intel_dp->downstream_ports);
|
||
if (mode) {
|
||
drm_mode_probed_add(connector, mode);
|
||
num_modes++;
|
||
}
|
||
}
|
||
|
||
return num_modes;
|
||
}
|
||
|
||
static int
|
||
intel_dp_connector_register(struct drm_connector *connector)
|
||
{
|
||
struct drm_i915_private *i915 = to_i915(connector->dev);
|
||
struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
|
||
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
|
||
struct intel_lspcon *lspcon = &dig_port->lspcon;
|
||
int ret;
|
||
|
||
ret = intel_connector_register(connector);
|
||
if (ret)
|
||
return ret;
|
||
|
||
drm_dbg_kms(&i915->drm, "registering %s bus for %s\n",
|
||
intel_dp->aux.name, connector->kdev->kobj.name);
|
||
|
||
intel_dp->aux.dev = connector->kdev;
|
||
ret = drm_dp_aux_register(&intel_dp->aux);
|
||
if (!ret)
|
||
drm_dp_cec_register_connector(&intel_dp->aux, connector);
|
||
|
||
if (!intel_bios_is_lspcon_present(i915, dig_port->base.port))
|
||
return ret;
|
||
|
||
/*
|
||
* ToDo: Clean this up to handle lspcon init and resume more
|
||
* efficiently and streamlined.
|
||
*/
|
||
if (lspcon_init(dig_port)) {
|
||
lspcon_detect_hdr_capability(lspcon);
|
||
if (lspcon->hdr_supported)
|
||
drm_connector_attach_hdr_output_metadata_property(connector);
|
||
}
|
||
|
||
return ret;
|
||
}
|
||
|
||
static void
|
||
intel_dp_connector_unregister(struct drm_connector *connector)
|
||
{
|
||
struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector));
|
||
|
||
drm_dp_cec_unregister_connector(&intel_dp->aux);
|
||
drm_dp_aux_unregister(&intel_dp->aux);
|
||
intel_connector_unregister(connector);
|
||
}
|
||
|
||
void intel_dp_encoder_flush_work(struct drm_encoder *encoder)
|
||
{
|
||
struct intel_digital_port *dig_port = enc_to_dig_port(to_intel_encoder(encoder));
|
||
struct intel_dp *intel_dp = &dig_port->dp;
|
||
|
||
intel_dp_mst_encoder_cleanup(dig_port);
|
||
|
||
intel_pps_vdd_off_sync(intel_dp);
|
||
|
||
/*
|
||
* Ensure power off delay is respected on module remove, so that we can
|
||
* reduce delays at driver probe. See pps_init_timestamps().
|
||
*/
|
||
intel_pps_wait_power_cycle(intel_dp);
|
||
|
||
intel_dp_aux_fini(intel_dp);
|
||
}
|
||
|
||
void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
|
||
{
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder);
|
||
|
||
intel_pps_vdd_off_sync(intel_dp);
|
||
}
|
||
|
||
void intel_dp_encoder_shutdown(struct intel_encoder *intel_encoder)
|
||
{
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder);
|
||
|
||
intel_pps_wait_power_cycle(intel_dp);
|
||
}
|
||
|
||
static int intel_modeset_tile_group(struct intel_atomic_state *state,
|
||
int tile_group_id)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
|
||
struct drm_connector_list_iter conn_iter;
|
||
struct drm_connector *connector;
|
||
int ret = 0;
|
||
|
||
drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
|
||
drm_for_each_connector_iter(connector, &conn_iter) {
|
||
struct drm_connector_state *conn_state;
|
||
struct intel_crtc_state *crtc_state;
|
||
struct intel_crtc *crtc;
|
||
|
||
if (!connector->has_tile ||
|
||
connector->tile_group->id != tile_group_id)
|
||
continue;
|
||
|
||
conn_state = drm_atomic_get_connector_state(&state->base,
|
||
connector);
|
||
if (IS_ERR(conn_state)) {
|
||
ret = PTR_ERR(conn_state);
|
||
break;
|
||
}
|
||
|
||
crtc = to_intel_crtc(conn_state->crtc);
|
||
|
||
if (!crtc)
|
||
continue;
|
||
|
||
crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
|
||
crtc_state->uapi.mode_changed = true;
|
||
|
||
ret = drm_atomic_add_affected_planes(&state->base, &crtc->base);
|
||
if (ret)
|
||
break;
|
||
}
|
||
drm_connector_list_iter_end(&conn_iter);
|
||
|
||
return ret;
|
||
}
|
||
|
||
static int intel_modeset_affected_transcoders(struct intel_atomic_state *state, u8 transcoders)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
|
||
struct intel_crtc *crtc;
|
||
|
||
if (transcoders == 0)
|
||
return 0;
|
||
|
||
for_each_intel_crtc(&dev_priv->drm, crtc) {
|
||
struct intel_crtc_state *crtc_state;
|
||
int ret;
|
||
|
||
crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
|
||
if (IS_ERR(crtc_state))
|
||
return PTR_ERR(crtc_state);
|
||
|
||
if (!crtc_state->hw.enable)
|
||
continue;
|
||
|
||
if (!(transcoders & BIT(crtc_state->cpu_transcoder)))
|
||
continue;
|
||
|
||
crtc_state->uapi.mode_changed = true;
|
||
|
||
ret = drm_atomic_add_affected_connectors(&state->base, &crtc->base);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ret = drm_atomic_add_affected_planes(&state->base, &crtc->base);
|
||
if (ret)
|
||
return ret;
|
||
|
||
transcoders &= ~BIT(crtc_state->cpu_transcoder);
|
||
}
|
||
|
||
drm_WARN_ON(&dev_priv->drm, transcoders != 0);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int intel_modeset_synced_crtcs(struct intel_atomic_state *state,
|
||
struct drm_connector *connector)
|
||
{
|
||
const struct drm_connector_state *old_conn_state =
|
||
drm_atomic_get_old_connector_state(&state->base, connector);
|
||
const struct intel_crtc_state *old_crtc_state;
|
||
struct intel_crtc *crtc;
|
||
u8 transcoders;
|
||
|
||
crtc = to_intel_crtc(old_conn_state->crtc);
|
||
if (!crtc)
|
||
return 0;
|
||
|
||
old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc);
|
||
|
||
if (!old_crtc_state->hw.active)
|
||
return 0;
|
||
|
||
transcoders = old_crtc_state->sync_mode_slaves_mask;
|
||
if (old_crtc_state->master_transcoder != INVALID_TRANSCODER)
|
||
transcoders |= BIT(old_crtc_state->master_transcoder);
|
||
|
||
return intel_modeset_affected_transcoders(state,
|
||
transcoders);
|
||
}
|
||
|
||
static int intel_dp_connector_atomic_check(struct drm_connector *conn,
|
||
struct drm_atomic_state *_state)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(conn->dev);
|
||
struct intel_atomic_state *state = to_intel_atomic_state(_state);
|
||
struct drm_connector_state *conn_state = drm_atomic_get_new_connector_state(_state, conn);
|
||
struct intel_connector *intel_conn = to_intel_connector(conn);
|
||
struct intel_dp *intel_dp = enc_to_intel_dp(intel_conn->encoder);
|
||
int ret;
|
||
|
||
ret = intel_digital_connector_atomic_check(conn, &state->base);
|
||
if (ret)
|
||
return ret;
|
||
|
||
if (intel_dp_mst_source_support(intel_dp)) {
|
||
ret = drm_dp_mst_root_conn_atomic_check(conn_state, &intel_dp->mst_mgr);
|
||
if (ret)
|
||
return ret;
|
||
}
|
||
|
||
/*
|
||
* We don't enable port sync on BDW due to missing w/as and
|
||
* due to not having adjusted the modeset sequence appropriately.
|
||
*/
|
||
if (DISPLAY_VER(dev_priv) < 9)
|
||
return 0;
|
||
|
||
if (!intel_connector_needs_modeset(state, conn))
|
||
return 0;
|
||
|
||
if (conn->has_tile) {
|
||
ret = intel_modeset_tile_group(state, conn->tile_group->id);
|
||
if (ret)
|
||
return ret;
|
||
}
|
||
|
||
return intel_modeset_synced_crtcs(state, conn);
|
||
}
|
||
|
||
static void intel_dp_oob_hotplug_event(struct drm_connector *connector)
|
||
{
|
||
struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector));
|
||
struct drm_i915_private *i915 = to_i915(connector->dev);
|
||
|
||
spin_lock_irq(&i915->irq_lock);
|
||
i915->display.hotplug.event_bits |= BIT(encoder->hpd_pin);
|
||
spin_unlock_irq(&i915->irq_lock);
|
||
queue_delayed_work(system_wq, &i915->display.hotplug.hotplug_work, 0);
|
||
}
|
||
|
||
static const struct drm_connector_funcs intel_dp_connector_funcs = {
|
||
.force = intel_dp_force,
|
||
.fill_modes = drm_helper_probe_single_connector_modes,
|
||
.atomic_get_property = intel_digital_connector_atomic_get_property,
|
||
.atomic_set_property = intel_digital_connector_atomic_set_property,
|
||
.late_register = intel_dp_connector_register,
|
||
.early_unregister = intel_dp_connector_unregister,
|
||
.destroy = intel_connector_destroy,
|
||
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
||
.atomic_duplicate_state = intel_digital_connector_duplicate_state,
|
||
.oob_hotplug_event = intel_dp_oob_hotplug_event,
|
||
};
|
||
|
||
static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = {
|
||
.detect_ctx = intel_dp_detect,
|
||
.get_modes = intel_dp_get_modes,
|
||
.mode_valid = intel_dp_mode_valid,
|
||
.atomic_check = intel_dp_connector_atomic_check,
|
||
};
|
||
|
||
enum irqreturn
|
||
intel_dp_hpd_pulse(struct intel_digital_port *dig_port, bool long_hpd)
|
||
{
|
||
struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
|
||
struct intel_dp *intel_dp = &dig_port->dp;
|
||
|
||
if (dig_port->base.type == INTEL_OUTPUT_EDP &&
|
||
(long_hpd || !intel_pps_have_panel_power_or_vdd(intel_dp))) {
|
||
/*
|
||
* vdd off can generate a long/short pulse on eDP which
|
||
* would require vdd on to handle it, and thus we
|
||
* would end up in an endless cycle of
|
||
* "vdd off -> long/short hpd -> vdd on -> detect -> vdd off -> ..."
|
||
*/
|
||
drm_dbg_kms(&i915->drm,
|
||
"ignoring %s hpd on eDP [ENCODER:%d:%s]\n",
|
||
long_hpd ? "long" : "short",
|
||
dig_port->base.base.base.id,
|
||
dig_port->base.base.name);
|
||
return IRQ_HANDLED;
|
||
}
|
||
|
||
drm_dbg_kms(&i915->drm, "got hpd irq on [ENCODER:%d:%s] - %s\n",
|
||
dig_port->base.base.base.id,
|
||
dig_port->base.base.name,
|
||
long_hpd ? "long" : "short");
|
||
|
||
if (long_hpd) {
|
||
intel_dp->reset_link_params = true;
|
||
return IRQ_NONE;
|
||
}
|
||
|
||
if (intel_dp->is_mst) {
|
||
if (!intel_dp_check_mst_status(intel_dp))
|
||
return IRQ_NONE;
|
||
} else if (!intel_dp_short_pulse(intel_dp)) {
|
||
return IRQ_NONE;
|
||
}
|
||
|
||
return IRQ_HANDLED;
|
||
}
|
||
|
||
/* check the VBT to see whether the eDP is on another port */
|
||
bool intel_dp_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
|
||
{
|
||
/*
|
||
* eDP not supported on g4x. so bail out early just
|
||
* for a bit extra safety in case the VBT is bonkers.
|
||
*/
|
||
if (DISPLAY_VER(dev_priv) < 5)
|
||
return false;
|
||
|
||
if (DISPLAY_VER(dev_priv) < 9 && port == PORT_A)
|
||
return true;
|
||
|
||
return intel_bios_is_port_edp(dev_priv, port);
|
||
}
|
||
|
||
static bool
|
||
has_gamut_metadata_dip(struct drm_i915_private *i915, enum port port)
|
||
{
|
||
if (intel_bios_is_lspcon_present(i915, port))
|
||
return false;
|
||
|
||
if (DISPLAY_VER(i915) >= 11)
|
||
return true;
|
||
|
||
if (port == PORT_A)
|
||
return false;
|
||
|
||
if (IS_HASWELL(i915) || IS_BROADWELL(i915) ||
|
||
DISPLAY_VER(i915) >= 9)
|
||
return true;
|
||
|
||
return false;
|
||
}
|
||
|
||
static void
|
||
intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector)
|
||
{
|
||
struct drm_i915_private *dev_priv = to_i915(connector->dev);
|
||
enum port port = dp_to_dig_port(intel_dp)->base.port;
|
||
|
||
if (!intel_dp_is_edp(intel_dp))
|
||
drm_connector_attach_dp_subconnector_property(connector);
|
||
|
||
if (!IS_G4X(dev_priv) && port != PORT_A)
|
||
intel_attach_force_audio_property(connector);
|
||
|
||
intel_attach_broadcast_rgb_property(connector);
|
||
if (HAS_GMCH(dev_priv))
|
||
drm_connector_attach_max_bpc_property(connector, 6, 10);
|
||
else if (DISPLAY_VER(dev_priv) >= 5)
|
||
drm_connector_attach_max_bpc_property(connector, 6, 12);
|
||
|
||
/* Register HDMI colorspace for case of lspcon */
|
||
if (intel_bios_is_lspcon_present(dev_priv, port)) {
|
||
drm_connector_attach_content_type_property(connector);
|
||
intel_attach_hdmi_colorspace_property(connector);
|
||
} else {
|
||
intel_attach_dp_colorspace_property(connector);
|
||
}
|
||
|
||
if (has_gamut_metadata_dip(dev_priv, port))
|
||
drm_connector_attach_hdr_output_metadata_property(connector);
|
||
|
||
if (HAS_VRR(dev_priv))
|
||
drm_connector_attach_vrr_capable_property(connector);
|
||
}
|
||
|
||
static void
|
||
intel_edp_add_properties(struct intel_dp *intel_dp)
|
||
{
|
||
struct intel_connector *connector = intel_dp->attached_connector;
|
||
struct drm_i915_private *i915 = to_i915(connector->base.dev);
|
||
const struct drm_display_mode *fixed_mode =
|
||
intel_panel_preferred_fixed_mode(connector);
|
||
|
||
intel_attach_scaling_mode_property(&connector->base);
|
||
|
||
drm_connector_set_panel_orientation_with_quirk(&connector->base,
|
||
i915->display.vbt.orientation,
|
||
fixed_mode->hdisplay,
|
||
fixed_mode->vdisplay);
|
||
}
|
||
|
||
static void intel_edp_backlight_setup(struct intel_dp *intel_dp,
|
||
struct intel_connector *connector)
|
||
{
|
||
struct drm_i915_private *i915 = dp_to_i915(intel_dp);
|
||
enum pipe pipe = INVALID_PIPE;
|
||
|
||
if (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)) {
|
||
/*
|
||
* Figure out the current pipe for the initial backlight setup.
|
||
* If the current pipe isn't valid, try the PPS pipe, and if that
|
||
* fails just assume pipe A.
|
||
*/
|
||
pipe = vlv_active_pipe(intel_dp);
|
||
|
||
if (pipe != PIPE_A && pipe != PIPE_B)
|
||
pipe = intel_dp->pps.pps_pipe;
|
||
|
||
if (pipe != PIPE_A && pipe != PIPE_B)
|
||
pipe = PIPE_A;
|
||
|
||
drm_dbg_kms(&i915->drm,
|
||
"[CONNECTOR:%d:%s] using pipe %c for initial backlight setup\n",
|
||
connector->base.base.id, connector->base.name,
|
||
pipe_name(pipe));
|
||
}
|
||
|
||
intel_backlight_setup(connector, pipe);
|
||
}
|
||
|
||
static bool intel_edp_init_connector(struct intel_dp *intel_dp,
|
||
struct intel_connector *intel_connector)
|
||
{
|
||
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
|
||
struct drm_connector *connector = &intel_connector->base;
|
||
struct drm_display_mode *fixed_mode;
|
||
struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
|
||
bool has_dpcd;
|
||
struct edid *edid;
|
||
|
||
if (!intel_dp_is_edp(intel_dp))
|
||
return true;
|
||
|
||
/*
|
||
* On IBX/CPT we may get here with LVDS already registered. Since the
|
||
* driver uses the only internal power sequencer available for both
|
||
* eDP and LVDS bail out early in this case to prevent interfering
|
||
* with an already powered-on LVDS power sequencer.
|
||
*/
|
||
if (intel_get_lvds_encoder(dev_priv)) {
|
||
drm_WARN_ON(&dev_priv->drm,
|
||
!(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)));
|
||
drm_info(&dev_priv->drm,
|
||
"LVDS was detected, not registering eDP\n");
|
||
|
||
return false;
|
||
}
|
||
|
||
intel_pps_init(intel_dp);
|
||
|
||
/* Cache DPCD and EDID for edp. */
|
||
has_dpcd = intel_edp_init_dpcd(intel_dp);
|
||
|
||
if (!has_dpcd) {
|
||
/* if this fails, presume the device is a ghost */
|
||
drm_info(&dev_priv->drm,
|
||
"[ENCODER:%d:%s] failed to retrieve link info, disabling eDP\n",
|
||
encoder->base.base.id, encoder->base.name);
|
||
goto out_vdd_off;
|
||
}
|
||
|
||
mutex_lock(&dev_priv->drm.mode_config.mutex);
|
||
edid = drm_get_edid(connector, &intel_dp->aux.ddc);
|
||
if (!edid) {
|
||
/* Fallback to EDID from ACPI OpRegion, if any */
|
||
edid = intel_opregion_get_edid(intel_connector);
|
||
if (edid)
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"[CONNECTOR:%d:%s] Using OpRegion EDID\n",
|
||
connector->base.id, connector->name);
|
||
}
|
||
if (edid) {
|
||
if (drm_add_edid_modes(connector, edid)) {
|
||
drm_connector_update_edid_property(connector, edid);
|
||
} else {
|
||
kfree(edid);
|
||
edid = ERR_PTR(-EINVAL);
|
||
}
|
||
} else {
|
||
edid = ERR_PTR(-ENOENT);
|
||
}
|
||
intel_connector->edid = edid;
|
||
|
||
intel_bios_init_panel(dev_priv, &intel_connector->panel,
|
||
encoder->devdata, IS_ERR(edid) ? NULL : edid);
|
||
|
||
intel_panel_add_edid_fixed_modes(intel_connector, true);
|
||
|
||
/* MSO requires information from the EDID */
|
||
intel_edp_mso_init(intel_dp);
|
||
|
||
/* multiply the mode clock and horizontal timings for MSO */
|
||
list_for_each_entry(fixed_mode, &intel_connector->panel.fixed_modes, head)
|
||
intel_edp_mso_mode_fixup(intel_connector, fixed_mode);
|
||
|
||
/* fallback to VBT if available for eDP */
|
||
if (!intel_panel_preferred_fixed_mode(intel_connector))
|
||
intel_panel_add_vbt_lfp_fixed_mode(intel_connector);
|
||
|
||
mutex_unlock(&dev_priv->drm.mode_config.mutex);
|
||
|
||
if (!intel_panel_preferred_fixed_mode(intel_connector)) {
|
||
drm_info(&dev_priv->drm,
|
||
"[ENCODER:%d:%s] failed to find fixed mode for the panel, disabling eDP\n",
|
||
encoder->base.base.id, encoder->base.name);
|
||
goto out_vdd_off;
|
||
}
|
||
|
||
intel_panel_init(intel_connector);
|
||
|
||
intel_edp_backlight_setup(intel_dp, intel_connector);
|
||
|
||
intel_edp_add_properties(intel_dp);
|
||
|
||
intel_pps_init_late(intel_dp);
|
||
|
||
return true;
|
||
|
||
out_vdd_off:
|
||
intel_pps_vdd_off_sync(intel_dp);
|
||
|
||
return false;
|
||
}
|
||
|
||
static void intel_dp_modeset_retry_work_fn(struct work_struct *work)
|
||
{
|
||
struct intel_connector *intel_connector;
|
||
struct drm_connector *connector;
|
||
|
||
intel_connector = container_of(work, typeof(*intel_connector),
|
||
modeset_retry_work);
|
||
connector = &intel_connector->base;
|
||
drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s]\n", connector->base.id,
|
||
connector->name);
|
||
|
||
/* Grab the locks before changing connector property*/
|
||
mutex_lock(&connector->dev->mode_config.mutex);
|
||
/* Set connector link status to BAD and send a Uevent to notify
|
||
* userspace to do a modeset.
|
||
*/
|
||
drm_connector_set_link_status_property(connector,
|
||
DRM_MODE_LINK_STATUS_BAD);
|
||
mutex_unlock(&connector->dev->mode_config.mutex);
|
||
/* Send Hotplug uevent so userspace can reprobe */
|
||
drm_kms_helper_connector_hotplug_event(connector);
|
||
}
|
||
|
||
bool
|
||
intel_dp_init_connector(struct intel_digital_port *dig_port,
|
||
struct intel_connector *intel_connector)
|
||
{
|
||
struct drm_connector *connector = &intel_connector->base;
|
||
struct intel_dp *intel_dp = &dig_port->dp;
|
||
struct intel_encoder *intel_encoder = &dig_port->base;
|
||
struct drm_device *dev = intel_encoder->base.dev;
|
||
struct drm_i915_private *dev_priv = to_i915(dev);
|
||
enum port port = intel_encoder->port;
|
||
enum phy phy = intel_port_to_phy(dev_priv, port);
|
||
int type;
|
||
|
||
/* Initialize the work for modeset in case of link train failure */
|
||
INIT_WORK(&intel_connector->modeset_retry_work,
|
||
intel_dp_modeset_retry_work_fn);
|
||
|
||
if (drm_WARN(dev, dig_port->max_lanes < 1,
|
||
"Not enough lanes (%d) for DP on [ENCODER:%d:%s]\n",
|
||
dig_port->max_lanes, intel_encoder->base.base.id,
|
||
intel_encoder->base.name))
|
||
return false;
|
||
|
||
intel_dp->reset_link_params = true;
|
||
intel_dp->pps.pps_pipe = INVALID_PIPE;
|
||
intel_dp->pps.active_pipe = INVALID_PIPE;
|
||
|
||
/* Preserve the current hw state. */
|
||
intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg);
|
||
intel_dp->attached_connector = intel_connector;
|
||
|
||
if (intel_dp_is_port_edp(dev_priv, port)) {
|
||
/*
|
||
* Currently we don't support eDP on TypeC ports, although in
|
||
* theory it could work on TypeC legacy ports.
|
||
*/
|
||
drm_WARN_ON(dev, intel_phy_is_tc(dev_priv, phy));
|
||
type = DRM_MODE_CONNECTOR_eDP;
|
||
intel_encoder->type = INTEL_OUTPUT_EDP;
|
||
|
||
/* eDP only on port B and/or C on vlv/chv */
|
||
if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
|
||
IS_CHERRYVIEW(dev_priv)) &&
|
||
port != PORT_B && port != PORT_C))
|
||
return false;
|
||
} else {
|
||
type = DRM_MODE_CONNECTOR_DisplayPort;
|
||
}
|
||
|
||
intel_dp_set_default_sink_rates(intel_dp);
|
||
intel_dp_set_default_max_sink_lane_count(intel_dp);
|
||
|
||
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
|
||
intel_dp->pps.active_pipe = vlv_active_pipe(intel_dp);
|
||
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"Adding %s connector on [ENCODER:%d:%s]\n",
|
||
type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP",
|
||
intel_encoder->base.base.id, intel_encoder->base.name);
|
||
|
||
drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
|
||
drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
|
||
|
||
if (!HAS_GMCH(dev_priv))
|
||
connector->interlace_allowed = true;
|
||
|
||
intel_connector->polled = DRM_CONNECTOR_POLL_HPD;
|
||
|
||
intel_dp_aux_init(intel_dp);
|
||
|
||
intel_connector_attach_encoder(intel_connector, intel_encoder);
|
||
|
||
if (HAS_DDI(dev_priv))
|
||
intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
|
||
else
|
||
intel_connector->get_hw_state = intel_connector_get_hw_state;
|
||
|
||
if (!intel_edp_init_connector(intel_dp, intel_connector)) {
|
||
intel_dp_aux_fini(intel_dp);
|
||
goto fail;
|
||
}
|
||
|
||
intel_dp_set_source_rates(intel_dp);
|
||
intel_dp_set_common_rates(intel_dp);
|
||
intel_dp_reset_max_link_params(intel_dp);
|
||
|
||
/* init MST on ports that can support it */
|
||
intel_dp_mst_encoder_init(dig_port,
|
||
intel_connector->base.base.id);
|
||
|
||
intel_dp_add_properties(intel_dp, connector);
|
||
|
||
if (is_hdcp_supported(dev_priv, port) && !intel_dp_is_edp(intel_dp)) {
|
||
int ret = intel_dp_hdcp_init(dig_port, intel_connector);
|
||
if (ret)
|
||
drm_dbg_kms(&dev_priv->drm,
|
||
"HDCP init failed, skipping.\n");
|
||
}
|
||
|
||
/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
|
||
* 0xd. Failure to do so will result in spurious interrupts being
|
||
* generated on the port when a cable is not attached.
|
||
*/
|
||
if (IS_G45(dev_priv)) {
|
||
u32 temp = intel_de_read(dev_priv, PEG_BAND_GAP_DATA);
|
||
intel_de_write(dev_priv, PEG_BAND_GAP_DATA,
|
||
(temp & ~0xf) | 0xd);
|
||
}
|
||
|
||
intel_dp->frl.is_trained = false;
|
||
intel_dp->frl.trained_rate_gbps = 0;
|
||
|
||
intel_psr_init(intel_dp);
|
||
|
||
return true;
|
||
|
||
fail:
|
||
drm_connector_cleanup(connector);
|
||
|
||
return false;
|
||
}
|
||
|
||
void intel_dp_mst_suspend(struct drm_i915_private *dev_priv)
|
||
{
|
||
struct intel_encoder *encoder;
|
||
|
||
if (!HAS_DISPLAY(dev_priv))
|
||
return;
|
||
|
||
for_each_intel_encoder(&dev_priv->drm, encoder) {
|
||
struct intel_dp *intel_dp;
|
||
|
||
if (encoder->type != INTEL_OUTPUT_DDI)
|
||
continue;
|
||
|
||
intel_dp = enc_to_intel_dp(encoder);
|
||
|
||
if (!intel_dp_mst_source_support(intel_dp))
|
||
continue;
|
||
|
||
if (intel_dp->is_mst)
|
||
drm_dp_mst_topology_mgr_suspend(&intel_dp->mst_mgr);
|
||
}
|
||
}
|
||
|
||
void intel_dp_mst_resume(struct drm_i915_private *dev_priv)
|
||
{
|
||
struct intel_encoder *encoder;
|
||
|
||
if (!HAS_DISPLAY(dev_priv))
|
||
return;
|
||
|
||
for_each_intel_encoder(&dev_priv->drm, encoder) {
|
||
struct intel_dp *intel_dp;
|
||
int ret;
|
||
|
||
if (encoder->type != INTEL_OUTPUT_DDI)
|
||
continue;
|
||
|
||
intel_dp = enc_to_intel_dp(encoder);
|
||
|
||
if (!intel_dp_mst_source_support(intel_dp))
|
||
continue;
|
||
|
||
ret = drm_dp_mst_topology_mgr_resume(&intel_dp->mst_mgr,
|
||
true);
|
||
if (ret) {
|
||
intel_dp->is_mst = false;
|
||
drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
|
||
false);
|
||
}
|
||
}
|
||
}
|