mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Wolfram Sang](/assets/img/avatar_default.png)
Move from the deprecated i2c_new_probed_device() to the new i2c_new_scanned_device(). No functional change for this driver because it doesn't check the return code anyhow. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
560 lines
13 KiB
C
560 lines
13 KiB
C
/*
|
|
* Creation Date: <2003/03/14 20:54:13 samuel>
|
|
* Time-stamp: <2004/03/20 14:20:59 samuel>
|
|
*
|
|
* <therm_windtunnel.c>
|
|
*
|
|
* The G4 "windtunnel" has a single fan controlled by an
|
|
* ADM1030 fan controller and a DS1775 thermostat.
|
|
*
|
|
* The fan controller is equipped with a temperature sensor
|
|
* which measures the case temperature. The DS1775 sensor
|
|
* measures the CPU temperature. This driver tunes the
|
|
* behavior of the fan. It is based upon empirical observations
|
|
* of the 'AppleFan' driver under Mac OS X.
|
|
*
|
|
* WARNING: This driver has only been testen on Apple's
|
|
* 1.25 MHz Dual G4 (March 03). It is tuned for a CPU
|
|
* temperature around 57 C.
|
|
*
|
|
* Copyright (C) 2003, 2004 Samuel Rydh (samuel@ibrium.se)
|
|
*
|
|
* Loosely based upon 'thermostat.c' written by Benjamin Herrenschmidt
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation
|
|
*
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <asm/prom.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/io.h>
|
|
#include <asm/sections.h>
|
|
#include <asm/macio.h>
|
|
|
|
#define LOG_TEMP 0 /* continuously log temperature */
|
|
|
|
static struct {
|
|
volatile int running;
|
|
struct task_struct *poll_task;
|
|
|
|
struct mutex lock;
|
|
struct platform_device *of_dev;
|
|
|
|
struct i2c_client *thermostat;
|
|
struct i2c_client *fan;
|
|
|
|
int overheat_temp; /* 100% fan at this temp */
|
|
int overheat_hyst;
|
|
int temp;
|
|
int casetemp;
|
|
int fan_level; /* active fan_table setting */
|
|
|
|
int downind;
|
|
int upind;
|
|
|
|
int r0, r1, r20, r23, r25; /* saved register */
|
|
} x;
|
|
|
|
#define T(x,y) (((x)<<8) | (y)*0x100/10 )
|
|
|
|
static struct {
|
|
int fan_down_setting;
|
|
int temp;
|
|
int fan_up_setting;
|
|
} fan_table[] = {
|
|
{ 11, T(0,0), 11 }, /* min fan */
|
|
{ 11, T(55,0), 11 },
|
|
{ 6, T(55,3), 11 },
|
|
{ 7, T(56,0), 11 },
|
|
{ 8, T(57,0), 8 },
|
|
{ 7, T(58,3), 7 },
|
|
{ 6, T(58,8), 6 },
|
|
{ 5, T(59,2), 5 },
|
|
{ 4, T(59,6), 4 },
|
|
{ 3, T(59,9), 3 },
|
|
{ 2, T(60,1), 2 },
|
|
{ 1, 0xfffff, 1 } /* on fire */
|
|
};
|
|
|
|
static void
|
|
print_temp( const char *s, int temp )
|
|
{
|
|
printk("%s%d.%d C", s ? s : "", temp>>8, (temp & 255)*10/256 );
|
|
}
|
|
|
|
static ssize_t
|
|
show_cpu_temperature( struct device *dev, struct device_attribute *attr, char *buf )
|
|
{
|
|
return sprintf(buf, "%d.%d\n", x.temp>>8, (x.temp & 255)*10/256 );
|
|
}
|
|
|
|
static ssize_t
|
|
show_case_temperature( struct device *dev, struct device_attribute *attr, char *buf )
|
|
{
|
|
return sprintf(buf, "%d.%d\n", x.casetemp>>8, (x.casetemp & 255)*10/256 );
|
|
}
|
|
|
|
static DEVICE_ATTR(cpu_temperature, S_IRUGO, show_cpu_temperature, NULL );
|
|
static DEVICE_ATTR(case_temperature, S_IRUGO, show_case_temperature, NULL );
|
|
|
|
|
|
|
|
/************************************************************************/
|
|
/* controller thread */
|
|
/************************************************************************/
|
|
|
|
static int
|
|
write_reg( struct i2c_client *cl, int reg, int data, int len )
|
|
{
|
|
u8 tmp[3];
|
|
|
|
if( len < 1 || len > 2 || data < 0 )
|
|
return -EINVAL;
|
|
|
|
tmp[0] = reg;
|
|
tmp[1] = (len == 1) ? data : (data >> 8);
|
|
tmp[2] = data;
|
|
len++;
|
|
|
|
if( i2c_master_send(cl, tmp, len) != len )
|
|
return -ENODEV;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
read_reg( struct i2c_client *cl, int reg, int len )
|
|
{
|
|
u8 buf[2];
|
|
|
|
if( len != 1 && len != 2 )
|
|
return -EINVAL;
|
|
buf[0] = reg;
|
|
if( i2c_master_send(cl, buf, 1) != 1 )
|
|
return -ENODEV;
|
|
if( i2c_master_recv(cl, buf, len) != len )
|
|
return -ENODEV;
|
|
return (len == 2)? ((unsigned int)buf[0] << 8) | buf[1] : buf[0];
|
|
}
|
|
|
|
static void
|
|
tune_fan( int fan_setting )
|
|
{
|
|
int val = (fan_setting << 3) | 7;
|
|
|
|
/* write_reg( x.fan, 0x24, val, 1 ); */
|
|
write_reg( x.fan, 0x25, val, 1 );
|
|
write_reg( x.fan, 0x20, 0, 1 );
|
|
print_temp("CPU-temp: ", x.temp );
|
|
if( x.casetemp )
|
|
print_temp(", Case: ", x.casetemp );
|
|
printk(", Fan: %d (tuned %+d)\n", 11-fan_setting, x.fan_level-fan_setting );
|
|
|
|
x.fan_level = fan_setting;
|
|
}
|
|
|
|
static void
|
|
poll_temp( void )
|
|
{
|
|
int temp, i, level, casetemp;
|
|
|
|
temp = read_reg( x.thermostat, 0, 2 );
|
|
|
|
/* this actually occurs when the computer is loaded */
|
|
if( temp < 0 )
|
|
return;
|
|
|
|
casetemp = read_reg(x.fan, 0x0b, 1) << 8;
|
|
casetemp |= (read_reg(x.fan, 0x06, 1) & 0x7) << 5;
|
|
|
|
if( LOG_TEMP && x.temp != temp ) {
|
|
print_temp("CPU-temp: ", temp );
|
|
print_temp(", Case: ", casetemp );
|
|
printk(", Fan: %d\n", 11-x.fan_level );
|
|
}
|
|
x.temp = temp;
|
|
x.casetemp = casetemp;
|
|
|
|
level = -1;
|
|
for( i=0; (temp & 0xffff) > fan_table[i].temp ; i++ )
|
|
;
|
|
if( i < x.downind )
|
|
level = fan_table[i].fan_down_setting;
|
|
x.downind = i;
|
|
|
|
for( i=0; (temp & 0xffff) >= fan_table[i+1].temp ; i++ )
|
|
;
|
|
if( x.upind < i )
|
|
level = fan_table[i].fan_up_setting;
|
|
x.upind = i;
|
|
|
|
if( level >= 0 )
|
|
tune_fan( level );
|
|
}
|
|
|
|
|
|
static void
|
|
setup_hardware( void )
|
|
{
|
|
int val;
|
|
int err;
|
|
|
|
/* save registers (if we unload the module) */
|
|
x.r0 = read_reg( x.fan, 0x00, 1 );
|
|
x.r1 = read_reg( x.fan, 0x01, 1 );
|
|
x.r20 = read_reg( x.fan, 0x20, 1 );
|
|
x.r23 = read_reg( x.fan, 0x23, 1 );
|
|
x.r25 = read_reg( x.fan, 0x25, 1 );
|
|
|
|
/* improve measurement resolution (convergence time 1.5s) */
|
|
if( (val=read_reg(x.thermostat, 1, 1)) >= 0 ) {
|
|
val |= 0x60;
|
|
if( write_reg( x.thermostat, 1, val, 1 ) )
|
|
printk("Failed writing config register\n");
|
|
}
|
|
/* disable interrupts and TAC input */
|
|
write_reg( x.fan, 0x01, 0x01, 1 );
|
|
/* enable filter */
|
|
write_reg( x.fan, 0x23, 0x91, 1 );
|
|
/* remote temp. controls fan */
|
|
write_reg( x.fan, 0x00, 0x95, 1 );
|
|
|
|
/* The thermostat (which besides measureing temperature controls
|
|
* has a THERM output which puts the fan on 100%) is usually
|
|
* set to kick in at 80 C (chip default). We reduce this a bit
|
|
* to be on the safe side (OSX doesn't)...
|
|
*/
|
|
if( x.overheat_temp == (80 << 8) ) {
|
|
x.overheat_temp = 75 << 8;
|
|
x.overheat_hyst = 70 << 8;
|
|
write_reg( x.thermostat, 2, x.overheat_hyst, 2 );
|
|
write_reg( x.thermostat, 3, x.overheat_temp, 2 );
|
|
|
|
print_temp("Reducing overheating limit to ", x.overheat_temp );
|
|
print_temp(" (Hyst: ", x.overheat_hyst );
|
|
printk(")\n");
|
|
}
|
|
|
|
/* set an initial fan setting */
|
|
x.downind = 0xffff;
|
|
x.upind = -1;
|
|
/* tune_fan( fan_up_table[x.upind].fan_setting ); */
|
|
|
|
err = device_create_file( &x.of_dev->dev, &dev_attr_cpu_temperature );
|
|
err |= device_create_file( &x.of_dev->dev, &dev_attr_case_temperature );
|
|
if (err)
|
|
printk(KERN_WARNING
|
|
"Failed to create temperature attribute file(s).\n");
|
|
}
|
|
|
|
static void
|
|
restore_regs( void )
|
|
{
|
|
device_remove_file( &x.of_dev->dev, &dev_attr_cpu_temperature );
|
|
device_remove_file( &x.of_dev->dev, &dev_attr_case_temperature );
|
|
|
|
write_reg( x.fan, 0x01, x.r1, 1 );
|
|
write_reg( x.fan, 0x20, x.r20, 1 );
|
|
write_reg( x.fan, 0x23, x.r23, 1 );
|
|
write_reg( x.fan, 0x25, x.r25, 1 );
|
|
write_reg( x.fan, 0x00, x.r0, 1 );
|
|
}
|
|
|
|
static int control_loop(void *dummy)
|
|
{
|
|
mutex_lock(&x.lock);
|
|
setup_hardware();
|
|
mutex_unlock(&x.lock);
|
|
|
|
for (;;) {
|
|
msleep_interruptible(8000);
|
|
if (kthread_should_stop())
|
|
break;
|
|
|
|
mutex_lock(&x.lock);
|
|
poll_temp();
|
|
mutex_unlock(&x.lock);
|
|
}
|
|
|
|
mutex_lock(&x.lock);
|
|
restore_regs();
|
|
mutex_unlock(&x.lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/************************************************************************/
|
|
/* i2c probing and setup */
|
|
/************************************************************************/
|
|
|
|
static void do_attach(struct i2c_adapter *adapter)
|
|
{
|
|
struct i2c_board_info info = { };
|
|
struct device_node *np;
|
|
|
|
/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
|
|
static const unsigned short scan_ds1775[] = {
|
|
0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
|
|
I2C_CLIENT_END
|
|
};
|
|
static const unsigned short scan_adm1030[] = {
|
|
0x2c, 0x2d, 0x2e, 0x2f,
|
|
I2C_CLIENT_END
|
|
};
|
|
|
|
if (x.running || strncmp(adapter->name, "uni-n", 5))
|
|
return;
|
|
|
|
np = of_find_compatible_node(adapter->dev.of_node, NULL, "MAC,ds1775");
|
|
if (np) {
|
|
of_node_put(np);
|
|
} else {
|
|
strlcpy(info.type, "MAC,ds1775", I2C_NAME_SIZE);
|
|
i2c_new_scanned_device(adapter, &info, scan_ds1775, NULL);
|
|
}
|
|
|
|
np = of_find_compatible_node(adapter->dev.of_node, NULL, "MAC,adm1030");
|
|
if (np) {
|
|
of_node_put(np);
|
|
} else {
|
|
strlcpy(info.type, "MAC,adm1030", I2C_NAME_SIZE);
|
|
i2c_new_scanned_device(adapter, &info, scan_adm1030, NULL);
|
|
}
|
|
}
|
|
|
|
static int
|
|
do_remove(struct i2c_client *client)
|
|
{
|
|
if (x.running) {
|
|
x.running = 0;
|
|
kthread_stop(x.poll_task);
|
|
x.poll_task = NULL;
|
|
}
|
|
if (client == x.thermostat)
|
|
x.thermostat = NULL;
|
|
else if (client == x.fan)
|
|
x.fan = NULL;
|
|
else
|
|
printk(KERN_ERR "g4fan: bad client\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
attach_fan( struct i2c_client *cl )
|
|
{
|
|
if( x.fan )
|
|
goto out;
|
|
|
|
/* check that this is an ADM1030 */
|
|
if( read_reg(cl, 0x3d, 1) != 0x30 || read_reg(cl, 0x3e, 1) != 0x41 )
|
|
goto out;
|
|
printk("ADM1030 fan controller [@%02x]\n", cl->addr );
|
|
|
|
x.fan = cl;
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
attach_thermostat( struct i2c_client *cl )
|
|
{
|
|
int hyst_temp, os_temp, temp;
|
|
|
|
if( x.thermostat )
|
|
goto out;
|
|
|
|
if( (temp=read_reg(cl, 0, 2)) < 0 )
|
|
goto out;
|
|
|
|
/* temperature sanity check */
|
|
if( temp < 0x1600 || temp > 0x3c00 )
|
|
goto out;
|
|
hyst_temp = read_reg(cl, 2, 2);
|
|
os_temp = read_reg(cl, 3, 2);
|
|
if( hyst_temp < 0 || os_temp < 0 )
|
|
goto out;
|
|
|
|
printk("DS1775 digital thermometer [@%02x]\n", cl->addr );
|
|
print_temp("Temp: ", temp );
|
|
print_temp(" Hyst: ", hyst_temp );
|
|
print_temp(" OS: ", os_temp );
|
|
printk("\n");
|
|
|
|
x.temp = temp;
|
|
x.overheat_temp = os_temp;
|
|
x.overheat_hyst = hyst_temp;
|
|
x.thermostat = cl;
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
enum chip { ds1775, adm1030 };
|
|
|
|
static const struct i2c_device_id therm_windtunnel_id[] = {
|
|
{ "MAC,ds1775", ds1775 },
|
|
{ "MAC,adm1030", adm1030 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, therm_windtunnel_id);
|
|
|
|
static int
|
|
do_probe(struct i2c_client *cl, const struct i2c_device_id *id)
|
|
{
|
|
struct i2c_adapter *adapter = cl->adapter;
|
|
int ret = 0;
|
|
|
|
if( !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA
|
|
| I2C_FUNC_SMBUS_WRITE_BYTE) )
|
|
return 0;
|
|
|
|
switch (id->driver_data) {
|
|
case adm1030:
|
|
ret = attach_fan(cl);
|
|
break;
|
|
case ds1775:
|
|
ret = attach_thermostat(cl);
|
|
break;
|
|
}
|
|
|
|
if (!x.running && x.thermostat && x.fan) {
|
|
x.running = 1;
|
|
x.poll_task = kthread_run(control_loop, NULL, "g4fand");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct i2c_driver g4fan_driver = {
|
|
.driver = {
|
|
.name = "therm_windtunnel",
|
|
},
|
|
.probe = do_probe,
|
|
.remove = do_remove,
|
|
.id_table = therm_windtunnel_id,
|
|
};
|
|
|
|
|
|
/************************************************************************/
|
|
/* initialization / cleanup */
|
|
/************************************************************************/
|
|
|
|
static int therm_of_probe(struct platform_device *dev)
|
|
{
|
|
struct i2c_adapter *adap;
|
|
int ret, i = 0;
|
|
|
|
adap = i2c_get_adapter(0);
|
|
if (!adap)
|
|
return -EPROBE_DEFER;
|
|
|
|
ret = i2c_add_driver(&g4fan_driver);
|
|
if (ret) {
|
|
i2c_put_adapter(adap);
|
|
return ret;
|
|
}
|
|
|
|
/* We assume Macs have consecutive I2C bus numbers starting at 0 */
|
|
while (adap) {
|
|
do_attach(adap);
|
|
if (x.running)
|
|
return 0;
|
|
i2c_put_adapter(adap);
|
|
adap = i2c_get_adapter(++i);
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int
|
|
therm_of_remove( struct platform_device *dev )
|
|
{
|
|
i2c_del_driver( &g4fan_driver );
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id therm_of_match[] = {{
|
|
.name = "fan",
|
|
.compatible = "adm1030"
|
|
}, {}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, therm_of_match);
|
|
|
|
static struct platform_driver therm_of_driver = {
|
|
.driver = {
|
|
.name = "temperature",
|
|
.of_match_table = therm_of_match,
|
|
},
|
|
.probe = therm_of_probe,
|
|
.remove = therm_of_remove,
|
|
};
|
|
|
|
struct apple_thermal_info {
|
|
u8 id; /* implementation ID */
|
|
u8 fan_count; /* number of fans */
|
|
u8 thermostat_count; /* number of thermostats */
|
|
u8 unused;
|
|
};
|
|
|
|
static int __init
|
|
g4fan_init( void )
|
|
{
|
|
const struct apple_thermal_info *info;
|
|
struct device_node *np;
|
|
|
|
mutex_init(&x.lock);
|
|
|
|
if( !(np=of_find_node_by_name(NULL, "power-mgt")) )
|
|
return -ENODEV;
|
|
info = of_get_property(np, "thermal-info", NULL);
|
|
of_node_put(np);
|
|
|
|
if( !info || !of_machine_is_compatible("PowerMac3,6") )
|
|
return -ENODEV;
|
|
|
|
if( info->id != 3 ) {
|
|
printk(KERN_ERR "therm_windtunnel: unsupported thermal design %d\n", info->id );
|
|
return -ENODEV;
|
|
}
|
|
if( !(np=of_find_node_by_name(NULL, "fan")) )
|
|
return -ENODEV;
|
|
x.of_dev = of_platform_device_create(np, "temperature", NULL);
|
|
of_node_put( np );
|
|
|
|
if( !x.of_dev ) {
|
|
printk(KERN_ERR "Can't register fan controller!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
platform_driver_register( &therm_of_driver );
|
|
return 0;
|
|
}
|
|
|
|
static void __exit
|
|
g4fan_exit( void )
|
|
{
|
|
platform_driver_unregister( &therm_of_driver );
|
|
|
|
if( x.of_dev )
|
|
of_device_unregister( x.of_dev );
|
|
}
|
|
|
|
module_init(g4fan_init);
|
|
module_exit(g4fan_exit);
|
|
|
|
MODULE_AUTHOR("Samuel Rydh <samuel@ibrium.se>");
|
|
MODULE_DESCRIPTION("Apple G4 (windtunnel) fan controller");
|
|
MODULE_LICENSE("GPL");
|