mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 01:10:04 +00:00
![Zheng Yongjun](/assets/img/avatar_default.png)
Spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201228135056.28511-1-zhengyongjun3@huawei.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
1888 lines
54 KiB
C
1888 lines
54 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* EMIF driver
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments, Inc.
|
|
*
|
|
* Aneesh V <aneesh@ti.com>
|
|
* Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*/
|
|
#include <linux/err.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/platform_data/emif_plat.h>
|
|
#include <linux/io.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/module.h>
|
|
#include <linux/list.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/pm.h>
|
|
|
|
#include "emif.h"
|
|
#include "jedec_ddr.h"
|
|
#include "of_memory.h"
|
|
|
|
/**
|
|
* struct emif_data - Per device static data for driver's use
|
|
* @duplicate: Whether the DDR devices attached to this EMIF
|
|
* instance are exactly same as that on EMIF1. In
|
|
* this case we can save some memory and processing
|
|
* @temperature_level: Maximum temperature of LPDDR2 devices attached
|
|
* to this EMIF - read from MR4 register. If there
|
|
* are two devices attached to this EMIF, this
|
|
* value is the maximum of the two temperature
|
|
* levels.
|
|
* @node: node in the device list
|
|
* @base: base address of memory-mapped IO registers.
|
|
* @dev: device pointer.
|
|
* @addressing table with addressing information from the spec
|
|
* @regs_cache: An array of 'struct emif_regs' that stores
|
|
* calculated register values for different
|
|
* frequencies, to avoid re-calculating them on
|
|
* each DVFS transition.
|
|
* @curr_regs: The set of register values used in the last
|
|
* frequency change (i.e. corresponding to the
|
|
* frequency in effect at the moment)
|
|
* @plat_data: Pointer to saved platform data.
|
|
* @debugfs_root: dentry to the root folder for EMIF in debugfs
|
|
* @np_ddr: Pointer to ddr device tree node
|
|
*/
|
|
struct emif_data {
|
|
u8 duplicate;
|
|
u8 temperature_level;
|
|
u8 lpmode;
|
|
struct list_head node;
|
|
unsigned long irq_state;
|
|
void __iomem *base;
|
|
struct device *dev;
|
|
const struct lpddr2_addressing *addressing;
|
|
struct emif_regs *regs_cache[EMIF_MAX_NUM_FREQUENCIES];
|
|
struct emif_regs *curr_regs;
|
|
struct emif_platform_data *plat_data;
|
|
struct dentry *debugfs_root;
|
|
struct device_node *np_ddr;
|
|
};
|
|
|
|
static struct emif_data *emif1;
|
|
static DEFINE_SPINLOCK(emif_lock);
|
|
static unsigned long irq_state;
|
|
static u32 t_ck; /* DDR clock period in ps */
|
|
static LIST_HEAD(device_list);
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static void do_emif_regdump_show(struct seq_file *s, struct emif_data *emif,
|
|
struct emif_regs *regs)
|
|
{
|
|
u32 type = emif->plat_data->device_info->type;
|
|
u32 ip_rev = emif->plat_data->ip_rev;
|
|
|
|
seq_printf(s, "EMIF register cache dump for %dMHz\n",
|
|
regs->freq/1000000);
|
|
|
|
seq_printf(s, "ref_ctrl_shdw\t: 0x%08x\n", regs->ref_ctrl_shdw);
|
|
seq_printf(s, "sdram_tim1_shdw\t: 0x%08x\n", regs->sdram_tim1_shdw);
|
|
seq_printf(s, "sdram_tim2_shdw\t: 0x%08x\n", regs->sdram_tim2_shdw);
|
|
seq_printf(s, "sdram_tim3_shdw\t: 0x%08x\n", regs->sdram_tim3_shdw);
|
|
|
|
if (ip_rev == EMIF_4D) {
|
|
seq_printf(s, "read_idle_ctrl_shdw_normal\t: 0x%08x\n",
|
|
regs->read_idle_ctrl_shdw_normal);
|
|
seq_printf(s, "read_idle_ctrl_shdw_volt_ramp\t: 0x%08x\n",
|
|
regs->read_idle_ctrl_shdw_volt_ramp);
|
|
} else if (ip_rev == EMIF_4D5) {
|
|
seq_printf(s, "dll_calib_ctrl_shdw_normal\t: 0x%08x\n",
|
|
regs->dll_calib_ctrl_shdw_normal);
|
|
seq_printf(s, "dll_calib_ctrl_shdw_volt_ramp\t: 0x%08x\n",
|
|
regs->dll_calib_ctrl_shdw_volt_ramp);
|
|
}
|
|
|
|
if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4) {
|
|
seq_printf(s, "ref_ctrl_shdw_derated\t: 0x%08x\n",
|
|
regs->ref_ctrl_shdw_derated);
|
|
seq_printf(s, "sdram_tim1_shdw_derated\t: 0x%08x\n",
|
|
regs->sdram_tim1_shdw_derated);
|
|
seq_printf(s, "sdram_tim3_shdw_derated\t: 0x%08x\n",
|
|
regs->sdram_tim3_shdw_derated);
|
|
}
|
|
}
|
|
|
|
static int emif_regdump_show(struct seq_file *s, void *unused)
|
|
{
|
|
struct emif_data *emif = s->private;
|
|
struct emif_regs **regs_cache;
|
|
int i;
|
|
|
|
if (emif->duplicate)
|
|
regs_cache = emif1->regs_cache;
|
|
else
|
|
regs_cache = emif->regs_cache;
|
|
|
|
for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
|
|
do_emif_regdump_show(s, emif, regs_cache[i]);
|
|
seq_putc(s, '\n');
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SHOW_ATTRIBUTE(emif_regdump);
|
|
|
|
static int emif_mr4_show(struct seq_file *s, void *unused)
|
|
{
|
|
struct emif_data *emif = s->private;
|
|
|
|
seq_printf(s, "MR4=%d\n", emif->temperature_level);
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SHOW_ATTRIBUTE(emif_mr4);
|
|
|
|
static int __init_or_module emif_debugfs_init(struct emif_data *emif)
|
|
{
|
|
emif->debugfs_root = debugfs_create_dir(dev_name(emif->dev), NULL);
|
|
debugfs_create_file("regcache_dump", S_IRUGO, emif->debugfs_root, emif,
|
|
&emif_regdump_fops);
|
|
debugfs_create_file("mr4", S_IRUGO, emif->debugfs_root, emif,
|
|
&emif_mr4_fops);
|
|
return 0;
|
|
}
|
|
|
|
static void __exit emif_debugfs_exit(struct emif_data *emif)
|
|
{
|
|
debugfs_remove_recursive(emif->debugfs_root);
|
|
emif->debugfs_root = NULL;
|
|
}
|
|
#else
|
|
static inline int __init_or_module emif_debugfs_init(struct emif_data *emif)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void __exit emif_debugfs_exit(struct emif_data *emif)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Calculate the period of DDR clock from frequency value
|
|
*/
|
|
static void set_ddr_clk_period(u32 freq)
|
|
{
|
|
/* Divide 10^12 by frequency to get period in ps */
|
|
t_ck = (u32)DIV_ROUND_UP_ULL(1000000000000ull, freq);
|
|
}
|
|
|
|
/*
|
|
* Get bus width used by EMIF. Note that this may be different from the
|
|
* bus width of the DDR devices used. For instance two 16-bit DDR devices
|
|
* may be connected to a given CS of EMIF. In this case bus width as far
|
|
* as EMIF is concerned is 32, where as the DDR bus width is 16 bits.
|
|
*/
|
|
static u32 get_emif_bus_width(struct emif_data *emif)
|
|
{
|
|
u32 width;
|
|
void __iomem *base = emif->base;
|
|
|
|
width = (readl(base + EMIF_SDRAM_CONFIG) & NARROW_MODE_MASK)
|
|
>> NARROW_MODE_SHIFT;
|
|
width = width == 0 ? 32 : 16;
|
|
|
|
return width;
|
|
}
|
|
|
|
/*
|
|
* Get the CL from SDRAM_CONFIG register
|
|
*/
|
|
static u32 get_cl(struct emif_data *emif)
|
|
{
|
|
u32 cl;
|
|
void __iomem *base = emif->base;
|
|
|
|
cl = (readl(base + EMIF_SDRAM_CONFIG) & CL_MASK) >> CL_SHIFT;
|
|
|
|
return cl;
|
|
}
|
|
|
|
static void set_lpmode(struct emif_data *emif, u8 lpmode)
|
|
{
|
|
u32 temp;
|
|
void __iomem *base = emif->base;
|
|
|
|
/*
|
|
* Workaround for errata i743 - LPDDR2 Power-Down State is Not
|
|
* Efficient
|
|
*
|
|
* i743 DESCRIPTION:
|
|
* The EMIF supports power-down state for low power. The EMIF
|
|
* automatically puts the SDRAM into power-down after the memory is
|
|
* not accessed for a defined number of cycles and the
|
|
* EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set to 0x4.
|
|
* As the EMIF supports automatic output impedance calibration, a ZQ
|
|
* calibration long command is issued every time it exits active
|
|
* power-down and precharge power-down modes. The EMIF waits and
|
|
* blocks any other command during this calibration.
|
|
* The EMIF does not allow selective disabling of ZQ calibration upon
|
|
* exit of power-down mode. Due to very short periods of power-down
|
|
* cycles, ZQ calibration overhead creates bandwidth issues and
|
|
* increases overall system power consumption. On the other hand,
|
|
* issuing ZQ calibration long commands when exiting self-refresh is
|
|
* still required.
|
|
*
|
|
* WORKAROUND
|
|
* Because there is no power consumption benefit of the power-down due
|
|
* to the calibration and there is a performance risk, the guideline
|
|
* is to not allow power-down state and, therefore, to not have set
|
|
* the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field to 0x4.
|
|
*/
|
|
if ((emif->plat_data->ip_rev == EMIF_4D) &&
|
|
(lpmode == EMIF_LP_MODE_PWR_DN)) {
|
|
WARN_ONCE(1,
|
|
"REG_LP_MODE = LP_MODE_PWR_DN(4) is prohibited by erratum i743 switch to LP_MODE_SELF_REFRESH(2)\n");
|
|
/* rollback LP_MODE to Self-refresh mode */
|
|
lpmode = EMIF_LP_MODE_SELF_REFRESH;
|
|
}
|
|
|
|
temp = readl(base + EMIF_POWER_MANAGEMENT_CONTROL);
|
|
temp &= ~LP_MODE_MASK;
|
|
temp |= (lpmode << LP_MODE_SHIFT);
|
|
writel(temp, base + EMIF_POWER_MANAGEMENT_CONTROL);
|
|
}
|
|
|
|
static void do_freq_update(void)
|
|
{
|
|
struct emif_data *emif;
|
|
|
|
/*
|
|
* Workaround for errata i728: Disable LPMODE during FREQ_UPDATE
|
|
*
|
|
* i728 DESCRIPTION:
|
|
* The EMIF automatically puts the SDRAM into self-refresh mode
|
|
* after the EMIF has not performed accesses during
|
|
* EMIF_PWR_MGMT_CTRL[7:4] REG_SR_TIM number of DDR clock cycles
|
|
* and the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set
|
|
* to 0x2. If during a small window the following three events
|
|
* occur:
|
|
* - The SR_TIMING counter expires
|
|
* - And frequency change is requested
|
|
* - And OCP access is requested
|
|
* Then it causes instable clock on the DDR interface.
|
|
*
|
|
* WORKAROUND
|
|
* To avoid the occurrence of the three events, the workaround
|
|
* is to disable the self-refresh when requesting a frequency
|
|
* change. Before requesting a frequency change the software must
|
|
* program EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x0. When the
|
|
* frequency change has been done, the software can reprogram
|
|
* EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x2
|
|
*/
|
|
list_for_each_entry(emif, &device_list, node) {
|
|
if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
|
|
set_lpmode(emif, EMIF_LP_MODE_DISABLE);
|
|
}
|
|
|
|
/*
|
|
* TODO: Do FREQ_UPDATE here when an API
|
|
* is available for this as part of the new
|
|
* clock framework
|
|
*/
|
|
|
|
list_for_each_entry(emif, &device_list, node) {
|
|
if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
|
|
set_lpmode(emif, EMIF_LP_MODE_SELF_REFRESH);
|
|
}
|
|
}
|
|
|
|
/* Find addressing table entry based on the device's type and density */
|
|
static const struct lpddr2_addressing *get_addressing_table(
|
|
const struct ddr_device_info *device_info)
|
|
{
|
|
u32 index, type, density;
|
|
|
|
type = device_info->type;
|
|
density = device_info->density;
|
|
|
|
switch (type) {
|
|
case DDR_TYPE_LPDDR2_S4:
|
|
index = density - 1;
|
|
break;
|
|
case DDR_TYPE_LPDDR2_S2:
|
|
switch (density) {
|
|
case DDR_DENSITY_1Gb:
|
|
case DDR_DENSITY_2Gb:
|
|
index = density + 3;
|
|
break;
|
|
default:
|
|
index = density - 1;
|
|
}
|
|
break;
|
|
default:
|
|
return NULL;
|
|
}
|
|
|
|
return &lpddr2_jedec_addressing_table[index];
|
|
}
|
|
|
|
/*
|
|
* Find the the right timing table from the array of timing
|
|
* tables of the device using DDR clock frequency
|
|
*/
|
|
static const struct lpddr2_timings *get_timings_table(struct emif_data *emif,
|
|
u32 freq)
|
|
{
|
|
u32 i, min, max, freq_nearest;
|
|
const struct lpddr2_timings *timings = NULL;
|
|
const struct lpddr2_timings *timings_arr = emif->plat_data->timings;
|
|
struct device *dev = emif->dev;
|
|
|
|
/* Start with a very high frequency - 1GHz */
|
|
freq_nearest = 1000000000;
|
|
|
|
/*
|
|
* Find the timings table such that:
|
|
* 1. the frequency range covers the required frequency(safe) AND
|
|
* 2. the max_freq is closest to the required frequency(optimal)
|
|
*/
|
|
for (i = 0; i < emif->plat_data->timings_arr_size; i++) {
|
|
max = timings_arr[i].max_freq;
|
|
min = timings_arr[i].min_freq;
|
|
if ((freq >= min) && (freq <= max) && (max < freq_nearest)) {
|
|
freq_nearest = max;
|
|
timings = &timings_arr[i];
|
|
}
|
|
}
|
|
|
|
if (!timings)
|
|
dev_err(dev, "%s: couldn't find timings for - %dHz\n",
|
|
__func__, freq);
|
|
|
|
dev_dbg(dev, "%s: timings table: freq %d, speed bin freq %d\n",
|
|
__func__, freq, freq_nearest);
|
|
|
|
return timings;
|
|
}
|
|
|
|
static u32 get_sdram_ref_ctrl_shdw(u32 freq,
|
|
const struct lpddr2_addressing *addressing)
|
|
{
|
|
u32 ref_ctrl_shdw = 0, val = 0, freq_khz, t_refi;
|
|
|
|
/* Scale down frequency and t_refi to avoid overflow */
|
|
freq_khz = freq / 1000;
|
|
t_refi = addressing->tREFI_ns / 100;
|
|
|
|
/*
|
|
* refresh rate to be set is 'tREFI(in us) * freq in MHz
|
|
* division by 10000 to account for change in units
|
|
*/
|
|
val = t_refi * freq_khz / 10000;
|
|
ref_ctrl_shdw |= val << REFRESH_RATE_SHIFT;
|
|
|
|
return ref_ctrl_shdw;
|
|
}
|
|
|
|
static u32 get_sdram_tim_1_shdw(const struct lpddr2_timings *timings,
|
|
const struct lpddr2_min_tck *min_tck,
|
|
const struct lpddr2_addressing *addressing)
|
|
{
|
|
u32 tim1 = 0, val = 0;
|
|
|
|
val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
|
|
tim1 |= val << T_WTR_SHIFT;
|
|
|
|
if (addressing->num_banks == B8)
|
|
val = DIV_ROUND_UP(timings->tFAW, t_ck*4);
|
|
else
|
|
val = max(min_tck->tRRD, DIV_ROUND_UP(timings->tRRD, t_ck));
|
|
tim1 |= (val - 1) << T_RRD_SHIFT;
|
|
|
|
val = DIV_ROUND_UP(timings->tRAS_min + timings->tRPab, t_ck) - 1;
|
|
tim1 |= val << T_RC_SHIFT;
|
|
|
|
val = max(min_tck->tRASmin, DIV_ROUND_UP(timings->tRAS_min, t_ck));
|
|
tim1 |= (val - 1) << T_RAS_SHIFT;
|
|
|
|
val = max(min_tck->tWR, DIV_ROUND_UP(timings->tWR, t_ck)) - 1;
|
|
tim1 |= val << T_WR_SHIFT;
|
|
|
|
val = max(min_tck->tRCD, DIV_ROUND_UP(timings->tRCD, t_ck)) - 1;
|
|
tim1 |= val << T_RCD_SHIFT;
|
|
|
|
val = max(min_tck->tRPab, DIV_ROUND_UP(timings->tRPab, t_ck)) - 1;
|
|
tim1 |= val << T_RP_SHIFT;
|
|
|
|
return tim1;
|
|
}
|
|
|
|
static u32 get_sdram_tim_1_shdw_derated(const struct lpddr2_timings *timings,
|
|
const struct lpddr2_min_tck *min_tck,
|
|
const struct lpddr2_addressing *addressing)
|
|
{
|
|
u32 tim1 = 0, val = 0;
|
|
|
|
val = max(min_tck->tWTR, DIV_ROUND_UP(timings->tWTR, t_ck)) - 1;
|
|
tim1 = val << T_WTR_SHIFT;
|
|
|
|
/*
|
|
* tFAW is approximately 4 times tRRD. So add 1875*4 = 7500ps
|
|
* to tFAW for de-rating
|
|
*/
|
|
if (addressing->num_banks == B8) {
|
|
val = DIV_ROUND_UP(timings->tFAW + 7500, 4 * t_ck) - 1;
|
|
} else {
|
|
val = DIV_ROUND_UP(timings->tRRD + 1875, t_ck);
|
|
val = max(min_tck->tRRD, val) - 1;
|
|
}
|
|
tim1 |= val << T_RRD_SHIFT;
|
|
|
|
val = DIV_ROUND_UP(timings->tRAS_min + timings->tRPab + 1875, t_ck);
|
|
tim1 |= (val - 1) << T_RC_SHIFT;
|
|
|
|
val = DIV_ROUND_UP(timings->tRAS_min + 1875, t_ck);
|
|
val = max(min_tck->tRASmin, val) - 1;
|
|
tim1 |= val << T_RAS_SHIFT;
|
|
|
|
val = max(min_tck->tWR, DIV_ROUND_UP(timings->tWR, t_ck)) - 1;
|
|
tim1 |= val << T_WR_SHIFT;
|
|
|
|
val = max(min_tck->tRCD, DIV_ROUND_UP(timings->tRCD + 1875, t_ck));
|
|
tim1 |= (val - 1) << T_RCD_SHIFT;
|
|
|
|
val = max(min_tck->tRPab, DIV_ROUND_UP(timings->tRPab + 1875, t_ck));
|
|
tim1 |= (val - 1) << T_RP_SHIFT;
|
|
|
|
return tim1;
|
|
}
|
|
|
|
static u32 get_sdram_tim_2_shdw(const struct lpddr2_timings *timings,
|
|
const struct lpddr2_min_tck *min_tck,
|
|
const struct lpddr2_addressing *addressing,
|
|
u32 type)
|
|
{
|
|
u32 tim2 = 0, val = 0;
|
|
|
|
val = min_tck->tCKE - 1;
|
|
tim2 |= val << T_CKE_SHIFT;
|
|
|
|
val = max(min_tck->tRTP, DIV_ROUND_UP(timings->tRTP, t_ck)) - 1;
|
|
tim2 |= val << T_RTP_SHIFT;
|
|
|
|
/* tXSNR = tRFCab_ps + 10 ns(tRFCab_ps for LPDDR2). */
|
|
val = DIV_ROUND_UP(addressing->tRFCab_ps + 10000, t_ck) - 1;
|
|
tim2 |= val << T_XSNR_SHIFT;
|
|
|
|
/* XSRD same as XSNR for LPDDR2 */
|
|
tim2 |= val << T_XSRD_SHIFT;
|
|
|
|
val = max(min_tck->tXP, DIV_ROUND_UP(timings->tXP, t_ck)) - 1;
|
|
tim2 |= val << T_XP_SHIFT;
|
|
|
|
return tim2;
|
|
}
|
|
|
|
static u32 get_sdram_tim_3_shdw(const struct lpddr2_timings *timings,
|
|
const struct lpddr2_min_tck *min_tck,
|
|
const struct lpddr2_addressing *addressing,
|
|
u32 type, u32 ip_rev, u32 derated)
|
|
{
|
|
u32 tim3 = 0, val = 0, t_dqsck;
|
|
|
|
val = timings->tRAS_max_ns / addressing->tREFI_ns - 1;
|
|
val = val > 0xF ? 0xF : val;
|
|
tim3 |= val << T_RAS_MAX_SHIFT;
|
|
|
|
val = DIV_ROUND_UP(addressing->tRFCab_ps, t_ck) - 1;
|
|
tim3 |= val << T_RFC_SHIFT;
|
|
|
|
t_dqsck = (derated == EMIF_DERATED_TIMINGS) ?
|
|
timings->tDQSCK_max_derated : timings->tDQSCK_max;
|
|
if (ip_rev == EMIF_4D5)
|
|
val = DIV_ROUND_UP(t_dqsck + 1000, t_ck) - 1;
|
|
else
|
|
val = DIV_ROUND_UP(t_dqsck, t_ck) - 1;
|
|
|
|
tim3 |= val << T_TDQSCKMAX_SHIFT;
|
|
|
|
val = DIV_ROUND_UP(timings->tZQCS, t_ck) - 1;
|
|
tim3 |= val << ZQ_ZQCS_SHIFT;
|
|
|
|
val = DIV_ROUND_UP(timings->tCKESR, t_ck);
|
|
val = max(min_tck->tCKESR, val) - 1;
|
|
tim3 |= val << T_CKESR_SHIFT;
|
|
|
|
if (ip_rev == EMIF_4D5) {
|
|
tim3 |= (EMIF_T_CSTA - 1) << T_CSTA_SHIFT;
|
|
|
|
val = DIV_ROUND_UP(EMIF_T_PDLL_UL, 128) - 1;
|
|
tim3 |= val << T_PDLL_UL_SHIFT;
|
|
}
|
|
|
|
return tim3;
|
|
}
|
|
|
|
static u32 get_zq_config_reg(const struct lpddr2_addressing *addressing,
|
|
bool cs1_used, bool cal_resistors_per_cs)
|
|
{
|
|
u32 zq = 0, val = 0;
|
|
|
|
val = EMIF_ZQCS_INTERVAL_US * 1000 / addressing->tREFI_ns;
|
|
zq |= val << ZQ_REFINTERVAL_SHIFT;
|
|
|
|
val = DIV_ROUND_UP(T_ZQCL_DEFAULT_NS, T_ZQCS_DEFAULT_NS) - 1;
|
|
zq |= val << ZQ_ZQCL_MULT_SHIFT;
|
|
|
|
val = DIV_ROUND_UP(T_ZQINIT_DEFAULT_NS, T_ZQCL_DEFAULT_NS) - 1;
|
|
zq |= val << ZQ_ZQINIT_MULT_SHIFT;
|
|
|
|
zq |= ZQ_SFEXITEN_ENABLE << ZQ_SFEXITEN_SHIFT;
|
|
|
|
if (cal_resistors_per_cs)
|
|
zq |= ZQ_DUALCALEN_ENABLE << ZQ_DUALCALEN_SHIFT;
|
|
else
|
|
zq |= ZQ_DUALCALEN_DISABLE << ZQ_DUALCALEN_SHIFT;
|
|
|
|
zq |= ZQ_CS0EN_MASK; /* CS0 is used for sure */
|
|
|
|
val = cs1_used ? 1 : 0;
|
|
zq |= val << ZQ_CS1EN_SHIFT;
|
|
|
|
return zq;
|
|
}
|
|
|
|
static u32 get_temp_alert_config(const struct lpddr2_addressing *addressing,
|
|
const struct emif_custom_configs *custom_configs, bool cs1_used,
|
|
u32 sdram_io_width, u32 emif_bus_width)
|
|
{
|
|
u32 alert = 0, interval, devcnt;
|
|
|
|
if (custom_configs && (custom_configs->mask &
|
|
EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL))
|
|
interval = custom_configs->temp_alert_poll_interval_ms;
|
|
else
|
|
interval = TEMP_ALERT_POLL_INTERVAL_DEFAULT_MS;
|
|
|
|
interval *= 1000000; /* Convert to ns */
|
|
interval /= addressing->tREFI_ns; /* Convert to refresh cycles */
|
|
alert |= (interval << TA_REFINTERVAL_SHIFT);
|
|
|
|
/*
|
|
* sdram_io_width is in 'log2(x) - 1' form. Convert emif_bus_width
|
|
* also to this form and subtract to get TA_DEVCNT, which is
|
|
* in log2(x) form.
|
|
*/
|
|
emif_bus_width = __fls(emif_bus_width) - 1;
|
|
devcnt = emif_bus_width - sdram_io_width;
|
|
alert |= devcnt << TA_DEVCNT_SHIFT;
|
|
|
|
/* DEVWDT is in 'log2(x) - 3' form */
|
|
alert |= (sdram_io_width - 2) << TA_DEVWDT_SHIFT;
|
|
|
|
alert |= 1 << TA_SFEXITEN_SHIFT;
|
|
alert |= 1 << TA_CS0EN_SHIFT;
|
|
alert |= (cs1_used ? 1 : 0) << TA_CS1EN_SHIFT;
|
|
|
|
return alert;
|
|
}
|
|
|
|
static u32 get_read_idle_ctrl_shdw(u8 volt_ramp)
|
|
{
|
|
u32 idle = 0, val = 0;
|
|
|
|
/*
|
|
* Maximum value in normal conditions and increased frequency
|
|
* when voltage is ramping
|
|
*/
|
|
if (volt_ramp)
|
|
val = READ_IDLE_INTERVAL_DVFS / t_ck / 64 - 1;
|
|
else
|
|
val = 0x1FF;
|
|
|
|
/*
|
|
* READ_IDLE_CTRL register in EMIF4D has same offset and fields
|
|
* as DLL_CALIB_CTRL in EMIF4D5, so use the same shifts
|
|
*/
|
|
idle |= val << DLL_CALIB_INTERVAL_SHIFT;
|
|
idle |= EMIF_READ_IDLE_LEN_VAL << ACK_WAIT_SHIFT;
|
|
|
|
return idle;
|
|
}
|
|
|
|
static u32 get_dll_calib_ctrl_shdw(u8 volt_ramp)
|
|
{
|
|
u32 calib = 0, val = 0;
|
|
|
|
if (volt_ramp == DDR_VOLTAGE_RAMPING)
|
|
val = DLL_CALIB_INTERVAL_DVFS / t_ck / 16 - 1;
|
|
else
|
|
val = 0; /* Disabled when voltage is stable */
|
|
|
|
calib |= val << DLL_CALIB_INTERVAL_SHIFT;
|
|
calib |= DLL_CALIB_ACK_WAIT_VAL << ACK_WAIT_SHIFT;
|
|
|
|
return calib;
|
|
}
|
|
|
|
static u32 get_ddr_phy_ctrl_1_attilaphy_4d(const struct lpddr2_timings *timings,
|
|
u32 freq, u8 RL)
|
|
{
|
|
u32 phy = EMIF_DDR_PHY_CTRL_1_BASE_VAL_ATTILAPHY, val = 0;
|
|
|
|
val = RL + DIV_ROUND_UP(timings->tDQSCK_max, t_ck) - 1;
|
|
phy |= val << READ_LATENCY_SHIFT_4D;
|
|
|
|
if (freq <= 100000000)
|
|
val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS_ATTILAPHY;
|
|
else if (freq <= 200000000)
|
|
val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ_ATTILAPHY;
|
|
else
|
|
val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ_ATTILAPHY;
|
|
|
|
phy |= val << DLL_SLAVE_DLY_CTRL_SHIFT_4D;
|
|
|
|
return phy;
|
|
}
|
|
|
|
static u32 get_phy_ctrl_1_intelliphy_4d5(u32 freq, u8 cl)
|
|
{
|
|
u32 phy = EMIF_DDR_PHY_CTRL_1_BASE_VAL_INTELLIPHY, half_delay;
|
|
|
|
/*
|
|
* DLL operates at 266 MHz. If DDR frequency is near 266 MHz,
|
|
* half-delay is not needed else set half-delay
|
|
*/
|
|
if (freq >= 265000000 && freq < 267000000)
|
|
half_delay = 0;
|
|
else
|
|
half_delay = 1;
|
|
|
|
phy |= half_delay << DLL_HALF_DELAY_SHIFT_4D5;
|
|
phy |= ((cl + DIV_ROUND_UP(EMIF_PHY_TOTAL_READ_LATENCY_INTELLIPHY_PS,
|
|
t_ck) - 1) << READ_LATENCY_SHIFT_4D5);
|
|
|
|
return phy;
|
|
}
|
|
|
|
static u32 get_ext_phy_ctrl_2_intelliphy_4d5(void)
|
|
{
|
|
u32 fifo_we_slave_ratio;
|
|
|
|
fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
|
|
EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
|
|
|
|
return fifo_we_slave_ratio | fifo_we_slave_ratio << 11 |
|
|
fifo_we_slave_ratio << 22;
|
|
}
|
|
|
|
static u32 get_ext_phy_ctrl_3_intelliphy_4d5(void)
|
|
{
|
|
u32 fifo_we_slave_ratio;
|
|
|
|
fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
|
|
EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
|
|
|
|
return fifo_we_slave_ratio >> 10 | fifo_we_slave_ratio << 1 |
|
|
fifo_we_slave_ratio << 12 | fifo_we_slave_ratio << 23;
|
|
}
|
|
|
|
static u32 get_ext_phy_ctrl_4_intelliphy_4d5(void)
|
|
{
|
|
u32 fifo_we_slave_ratio;
|
|
|
|
fifo_we_slave_ratio = DIV_ROUND_CLOSEST(
|
|
EMIF_INTELLI_PHY_DQS_GATE_OPENING_DELAY_PS * 256, t_ck);
|
|
|
|
return fifo_we_slave_ratio >> 9 | fifo_we_slave_ratio << 2 |
|
|
fifo_we_slave_ratio << 13;
|
|
}
|
|
|
|
static u32 get_pwr_mgmt_ctrl(u32 freq, struct emif_data *emif, u32 ip_rev)
|
|
{
|
|
u32 pwr_mgmt_ctrl = 0, timeout;
|
|
u32 lpmode = EMIF_LP_MODE_SELF_REFRESH;
|
|
u32 timeout_perf = EMIF_LP_MODE_TIMEOUT_PERFORMANCE;
|
|
u32 timeout_pwr = EMIF_LP_MODE_TIMEOUT_POWER;
|
|
u32 freq_threshold = EMIF_LP_MODE_FREQ_THRESHOLD;
|
|
u32 mask;
|
|
u8 shift;
|
|
|
|
struct emif_custom_configs *cust_cfgs = emif->plat_data->custom_configs;
|
|
|
|
if (cust_cfgs && (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE)) {
|
|
lpmode = cust_cfgs->lpmode;
|
|
timeout_perf = cust_cfgs->lpmode_timeout_performance;
|
|
timeout_pwr = cust_cfgs->lpmode_timeout_power;
|
|
freq_threshold = cust_cfgs->lpmode_freq_threshold;
|
|
}
|
|
|
|
/* Timeout based on DDR frequency */
|
|
timeout = freq >= freq_threshold ? timeout_perf : timeout_pwr;
|
|
|
|
/*
|
|
* The value to be set in register is "log2(timeout) - 3"
|
|
* if timeout < 16 load 0 in register
|
|
* if timeout is not a power of 2, round to next highest power of 2
|
|
*/
|
|
if (timeout < 16) {
|
|
timeout = 0;
|
|
} else {
|
|
if (timeout & (timeout - 1))
|
|
timeout <<= 1;
|
|
timeout = __fls(timeout) - 3;
|
|
}
|
|
|
|
switch (lpmode) {
|
|
case EMIF_LP_MODE_CLOCK_STOP:
|
|
shift = CS_TIM_SHIFT;
|
|
mask = CS_TIM_MASK;
|
|
break;
|
|
case EMIF_LP_MODE_SELF_REFRESH:
|
|
/* Workaround for errata i735 */
|
|
if (timeout < 6)
|
|
timeout = 6;
|
|
|
|
shift = SR_TIM_SHIFT;
|
|
mask = SR_TIM_MASK;
|
|
break;
|
|
case EMIF_LP_MODE_PWR_DN:
|
|
shift = PD_TIM_SHIFT;
|
|
mask = PD_TIM_MASK;
|
|
break;
|
|
case EMIF_LP_MODE_DISABLE:
|
|
default:
|
|
mask = 0;
|
|
shift = 0;
|
|
break;
|
|
}
|
|
/* Round to maximum in case of overflow, BUT warn! */
|
|
if (lpmode != EMIF_LP_MODE_DISABLE && timeout > mask >> shift) {
|
|
pr_err("TIMEOUT Overflow - lpmode=%d perf=%d pwr=%d freq=%d\n",
|
|
lpmode,
|
|
timeout_perf,
|
|
timeout_pwr,
|
|
freq_threshold);
|
|
WARN(1, "timeout=0x%02x greater than 0x%02x. Using max\n",
|
|
timeout, mask >> shift);
|
|
timeout = mask >> shift;
|
|
}
|
|
|
|
/* Setup required timing */
|
|
pwr_mgmt_ctrl = (timeout << shift) & mask;
|
|
/* setup a default mask for rest of the modes */
|
|
pwr_mgmt_ctrl |= (SR_TIM_MASK | CS_TIM_MASK | PD_TIM_MASK) &
|
|
~mask;
|
|
|
|
/* No CS_TIM in EMIF_4D5 */
|
|
if (ip_rev == EMIF_4D5)
|
|
pwr_mgmt_ctrl &= ~CS_TIM_MASK;
|
|
|
|
pwr_mgmt_ctrl |= lpmode << LP_MODE_SHIFT;
|
|
|
|
return pwr_mgmt_ctrl;
|
|
}
|
|
|
|
/*
|
|
* Get the temperature level of the EMIF instance:
|
|
* Reads the MR4 register of attached SDRAM parts to find out the temperature
|
|
* level. If there are two parts attached(one on each CS), then the temperature
|
|
* level for the EMIF instance is the higher of the two temperatures.
|
|
*/
|
|
static void get_temperature_level(struct emif_data *emif)
|
|
{
|
|
u32 temp, temperature_level;
|
|
void __iomem *base;
|
|
|
|
base = emif->base;
|
|
|
|
/* Read mode register 4 */
|
|
writel(DDR_MR4, base + EMIF_LPDDR2_MODE_REG_CONFIG);
|
|
temperature_level = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
|
|
temperature_level = (temperature_level & MR4_SDRAM_REF_RATE_MASK) >>
|
|
MR4_SDRAM_REF_RATE_SHIFT;
|
|
|
|
if (emif->plat_data->device_info->cs1_used) {
|
|
writel(DDR_MR4 | CS_MASK, base + EMIF_LPDDR2_MODE_REG_CONFIG);
|
|
temp = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
|
|
temp = (temp & MR4_SDRAM_REF_RATE_MASK)
|
|
>> MR4_SDRAM_REF_RATE_SHIFT;
|
|
temperature_level = max(temp, temperature_level);
|
|
}
|
|
|
|
/* treat everything less than nominal(3) in MR4 as nominal */
|
|
if (unlikely(temperature_level < SDRAM_TEMP_NOMINAL))
|
|
temperature_level = SDRAM_TEMP_NOMINAL;
|
|
|
|
/* if we get reserved value in MR4 persist with the existing value */
|
|
if (likely(temperature_level != SDRAM_TEMP_RESERVED_4))
|
|
emif->temperature_level = temperature_level;
|
|
}
|
|
|
|
/*
|
|
* Program EMIF shadow registers that are not dependent on temperature
|
|
* or voltage
|
|
*/
|
|
static void setup_registers(struct emif_data *emif, struct emif_regs *regs)
|
|
{
|
|
void __iomem *base = emif->base;
|
|
|
|
writel(regs->sdram_tim2_shdw, base + EMIF_SDRAM_TIMING_2_SHDW);
|
|
writel(regs->phy_ctrl_1_shdw, base + EMIF_DDR_PHY_CTRL_1_SHDW);
|
|
writel(regs->pwr_mgmt_ctrl_shdw,
|
|
base + EMIF_POWER_MANAGEMENT_CTRL_SHDW);
|
|
|
|
/* Settings specific for EMIF4D5 */
|
|
if (emif->plat_data->ip_rev != EMIF_4D5)
|
|
return;
|
|
writel(regs->ext_phy_ctrl_2_shdw, base + EMIF_EXT_PHY_CTRL_2_SHDW);
|
|
writel(regs->ext_phy_ctrl_3_shdw, base + EMIF_EXT_PHY_CTRL_3_SHDW);
|
|
writel(regs->ext_phy_ctrl_4_shdw, base + EMIF_EXT_PHY_CTRL_4_SHDW);
|
|
}
|
|
|
|
/*
|
|
* When voltage ramps dll calibration and forced read idle should
|
|
* happen more often
|
|
*/
|
|
static void setup_volt_sensitive_regs(struct emif_data *emif,
|
|
struct emif_regs *regs, u32 volt_state)
|
|
{
|
|
u32 calib_ctrl;
|
|
void __iomem *base = emif->base;
|
|
|
|
/*
|
|
* EMIF_READ_IDLE_CTRL in EMIF4D refers to the same register as
|
|
* EMIF_DLL_CALIB_CTRL in EMIF4D5 and dll_calib_ctrl_shadow_*
|
|
* is an alias of the respective read_idle_ctrl_shdw_* (members of
|
|
* a union). So, the below code takes care of both cases
|
|
*/
|
|
if (volt_state == DDR_VOLTAGE_RAMPING)
|
|
calib_ctrl = regs->dll_calib_ctrl_shdw_volt_ramp;
|
|
else
|
|
calib_ctrl = regs->dll_calib_ctrl_shdw_normal;
|
|
|
|
writel(calib_ctrl, base + EMIF_DLL_CALIB_CTRL_SHDW);
|
|
}
|
|
|
|
/*
|
|
* setup_temperature_sensitive_regs() - set the timings for temperature
|
|
* sensitive registers. This happens once at initialisation time based
|
|
* on the temperature at boot time and subsequently based on the temperature
|
|
* alert interrupt. Temperature alert can happen when the temperature
|
|
* increases or drops. So this function can have the effect of either
|
|
* derating the timings or going back to nominal values.
|
|
*/
|
|
static void setup_temperature_sensitive_regs(struct emif_data *emif,
|
|
struct emif_regs *regs)
|
|
{
|
|
u32 tim1, tim3, ref_ctrl, type;
|
|
void __iomem *base = emif->base;
|
|
u32 temperature;
|
|
|
|
type = emif->plat_data->device_info->type;
|
|
|
|
tim1 = regs->sdram_tim1_shdw;
|
|
tim3 = regs->sdram_tim3_shdw;
|
|
ref_ctrl = regs->ref_ctrl_shdw;
|
|
|
|
/* No de-rating for non-lpddr2 devices */
|
|
if (type != DDR_TYPE_LPDDR2_S2 && type != DDR_TYPE_LPDDR2_S4)
|
|
goto out;
|
|
|
|
temperature = emif->temperature_level;
|
|
if (temperature == SDRAM_TEMP_HIGH_DERATE_REFRESH) {
|
|
ref_ctrl = regs->ref_ctrl_shdw_derated;
|
|
} else if (temperature == SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS) {
|
|
tim1 = regs->sdram_tim1_shdw_derated;
|
|
tim3 = regs->sdram_tim3_shdw_derated;
|
|
ref_ctrl = regs->ref_ctrl_shdw_derated;
|
|
}
|
|
|
|
out:
|
|
writel(tim1, base + EMIF_SDRAM_TIMING_1_SHDW);
|
|
writel(tim3, base + EMIF_SDRAM_TIMING_3_SHDW);
|
|
writel(ref_ctrl, base + EMIF_SDRAM_REFRESH_CTRL_SHDW);
|
|
}
|
|
|
|
static irqreturn_t handle_temp_alert(void __iomem *base, struct emif_data *emif)
|
|
{
|
|
u32 old_temp_level;
|
|
irqreturn_t ret = IRQ_HANDLED;
|
|
struct emif_custom_configs *custom_configs;
|
|
|
|
spin_lock_irqsave(&emif_lock, irq_state);
|
|
old_temp_level = emif->temperature_level;
|
|
get_temperature_level(emif);
|
|
|
|
if (unlikely(emif->temperature_level == old_temp_level)) {
|
|
goto out;
|
|
} else if (!emif->curr_regs) {
|
|
dev_err(emif->dev, "temperature alert before registers are calculated, not de-rating timings\n");
|
|
goto out;
|
|
}
|
|
|
|
custom_configs = emif->plat_data->custom_configs;
|
|
|
|
/*
|
|
* IF we detect higher than "nominal rating" from DDR sensor
|
|
* on an unsupported DDR part, shutdown system
|
|
*/
|
|
if (custom_configs && !(custom_configs->mask &
|
|
EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART)) {
|
|
if (emif->temperature_level >= SDRAM_TEMP_HIGH_DERATE_REFRESH) {
|
|
dev_err(emif->dev,
|
|
"%s:NOT Extended temperature capable memory. Converting MR4=0x%02x as shutdown event\n",
|
|
__func__, emif->temperature_level);
|
|
/*
|
|
* Temperature far too high - do kernel_power_off()
|
|
* from thread context
|
|
*/
|
|
emif->temperature_level = SDRAM_TEMP_VERY_HIGH_SHUTDOWN;
|
|
ret = IRQ_WAKE_THREAD;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (emif->temperature_level < old_temp_level ||
|
|
emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN) {
|
|
/*
|
|
* Temperature coming down - defer handling to thread OR
|
|
* Temperature far too high - do kernel_power_off() from
|
|
* thread context
|
|
*/
|
|
ret = IRQ_WAKE_THREAD;
|
|
} else {
|
|
/* Temperature is going up - handle immediately */
|
|
setup_temperature_sensitive_regs(emif, emif->curr_regs);
|
|
do_freq_update();
|
|
}
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&emif_lock, irq_state);
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t emif_interrupt_handler(int irq, void *dev_id)
|
|
{
|
|
u32 interrupts;
|
|
struct emif_data *emif = dev_id;
|
|
void __iomem *base = emif->base;
|
|
struct device *dev = emif->dev;
|
|
irqreturn_t ret = IRQ_HANDLED;
|
|
|
|
/* Save the status and clear it */
|
|
interrupts = readl(base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
|
|
writel(interrupts, base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
|
|
|
|
/*
|
|
* Handle temperature alert
|
|
* Temperature alert should be same for all ports
|
|
* So, it's enough to process it only for one of the ports
|
|
*/
|
|
if (interrupts & TA_SYS_MASK)
|
|
ret = handle_temp_alert(base, emif);
|
|
|
|
if (interrupts & ERR_SYS_MASK)
|
|
dev_err(dev, "Access error from SYS port - %x\n", interrupts);
|
|
|
|
if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE) {
|
|
/* Save the status and clear it */
|
|
interrupts = readl(base + EMIF_LL_OCP_INTERRUPT_STATUS);
|
|
writel(interrupts, base + EMIF_LL_OCP_INTERRUPT_STATUS);
|
|
|
|
if (interrupts & ERR_LL_MASK)
|
|
dev_err(dev, "Access error from LL port - %x\n",
|
|
interrupts);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t emif_threaded_isr(int irq, void *dev_id)
|
|
{
|
|
struct emif_data *emif = dev_id;
|
|
|
|
if (emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN) {
|
|
dev_emerg(emif->dev, "SDRAM temperature exceeds operating limit.. Needs shut down!!!\n");
|
|
|
|
/* If we have Power OFF ability, use it, else try restarting */
|
|
if (pm_power_off) {
|
|
kernel_power_off();
|
|
} else {
|
|
WARN(1, "FIXME: NO pm_power_off!!! trying restart\n");
|
|
kernel_restart("SDRAM Over-temp Emergency restart");
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
spin_lock_irqsave(&emif_lock, irq_state);
|
|
|
|
if (emif->curr_regs) {
|
|
setup_temperature_sensitive_regs(emif, emif->curr_regs);
|
|
do_freq_update();
|
|
} else {
|
|
dev_err(emif->dev, "temperature alert before registers are calculated, not de-rating timings\n");
|
|
}
|
|
|
|
spin_unlock_irqrestore(&emif_lock, irq_state);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void clear_all_interrupts(struct emif_data *emif)
|
|
{
|
|
void __iomem *base = emif->base;
|
|
|
|
writel(readl(base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS),
|
|
base + EMIF_SYSTEM_OCP_INTERRUPT_STATUS);
|
|
if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE)
|
|
writel(readl(base + EMIF_LL_OCP_INTERRUPT_STATUS),
|
|
base + EMIF_LL_OCP_INTERRUPT_STATUS);
|
|
}
|
|
|
|
static void disable_and_clear_all_interrupts(struct emif_data *emif)
|
|
{
|
|
void __iomem *base = emif->base;
|
|
|
|
/* Disable all interrupts */
|
|
writel(readl(base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET),
|
|
base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_CLEAR);
|
|
if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE)
|
|
writel(readl(base + EMIF_LL_OCP_INTERRUPT_ENABLE_SET),
|
|
base + EMIF_LL_OCP_INTERRUPT_ENABLE_CLEAR);
|
|
|
|
/* Clear all interrupts */
|
|
clear_all_interrupts(emif);
|
|
}
|
|
|
|
static int __init_or_module setup_interrupts(struct emif_data *emif, u32 irq)
|
|
{
|
|
u32 interrupts, type;
|
|
void __iomem *base = emif->base;
|
|
|
|
type = emif->plat_data->device_info->type;
|
|
|
|
clear_all_interrupts(emif);
|
|
|
|
/* Enable interrupts for SYS interface */
|
|
interrupts = EN_ERR_SYS_MASK;
|
|
if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4)
|
|
interrupts |= EN_TA_SYS_MASK;
|
|
writel(interrupts, base + EMIF_SYSTEM_OCP_INTERRUPT_ENABLE_SET);
|
|
|
|
/* Enable interrupts for LL interface */
|
|
if (emif->plat_data->hw_caps & EMIF_HW_CAPS_LL_INTERFACE) {
|
|
/* TA need not be enabled for LL */
|
|
interrupts = EN_ERR_LL_MASK;
|
|
writel(interrupts, base + EMIF_LL_OCP_INTERRUPT_ENABLE_SET);
|
|
}
|
|
|
|
/* setup IRQ handlers */
|
|
return devm_request_threaded_irq(emif->dev, irq,
|
|
emif_interrupt_handler,
|
|
emif_threaded_isr,
|
|
0, dev_name(emif->dev),
|
|
emif);
|
|
|
|
}
|
|
|
|
static void __init_or_module emif_onetime_settings(struct emif_data *emif)
|
|
{
|
|
u32 pwr_mgmt_ctrl, zq, temp_alert_cfg;
|
|
void __iomem *base = emif->base;
|
|
const struct lpddr2_addressing *addressing;
|
|
const struct ddr_device_info *device_info;
|
|
|
|
device_info = emif->plat_data->device_info;
|
|
addressing = get_addressing_table(device_info);
|
|
|
|
/*
|
|
* Init power management settings
|
|
* We don't know the frequency yet. Use a high frequency
|
|
* value for a conservative timeout setting
|
|
*/
|
|
pwr_mgmt_ctrl = get_pwr_mgmt_ctrl(1000000000, emif,
|
|
emif->plat_data->ip_rev);
|
|
emif->lpmode = (pwr_mgmt_ctrl & LP_MODE_MASK) >> LP_MODE_SHIFT;
|
|
writel(pwr_mgmt_ctrl, base + EMIF_POWER_MANAGEMENT_CONTROL);
|
|
|
|
/* Init ZQ calibration settings */
|
|
zq = get_zq_config_reg(addressing, device_info->cs1_used,
|
|
device_info->cal_resistors_per_cs);
|
|
writel(zq, base + EMIF_SDRAM_OUTPUT_IMPEDANCE_CALIBRATION_CONFIG);
|
|
|
|
/* Check temperature level temperature level*/
|
|
get_temperature_level(emif);
|
|
if (emif->temperature_level == SDRAM_TEMP_VERY_HIGH_SHUTDOWN)
|
|
dev_emerg(emif->dev, "SDRAM temperature exceeds operating limit.. Needs shut down!!!\n");
|
|
|
|
/* Init temperature polling */
|
|
temp_alert_cfg = get_temp_alert_config(addressing,
|
|
emif->plat_data->custom_configs, device_info->cs1_used,
|
|
device_info->io_width, get_emif_bus_width(emif));
|
|
writel(temp_alert_cfg, base + EMIF_TEMPERATURE_ALERT_CONFIG);
|
|
|
|
/*
|
|
* Program external PHY control registers that are not frequency
|
|
* dependent
|
|
*/
|
|
if (emif->plat_data->phy_type != EMIF_PHY_TYPE_INTELLIPHY)
|
|
return;
|
|
writel(EMIF_EXT_PHY_CTRL_1_VAL, base + EMIF_EXT_PHY_CTRL_1_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_5_VAL, base + EMIF_EXT_PHY_CTRL_5_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_6_VAL, base + EMIF_EXT_PHY_CTRL_6_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_7_VAL, base + EMIF_EXT_PHY_CTRL_7_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_8_VAL, base + EMIF_EXT_PHY_CTRL_8_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_9_VAL, base + EMIF_EXT_PHY_CTRL_9_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_10_VAL, base + EMIF_EXT_PHY_CTRL_10_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_11_VAL, base + EMIF_EXT_PHY_CTRL_11_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_12_VAL, base + EMIF_EXT_PHY_CTRL_12_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_13_VAL, base + EMIF_EXT_PHY_CTRL_13_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_14_VAL, base + EMIF_EXT_PHY_CTRL_14_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_15_VAL, base + EMIF_EXT_PHY_CTRL_15_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_16_VAL, base + EMIF_EXT_PHY_CTRL_16_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_17_VAL, base + EMIF_EXT_PHY_CTRL_17_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_18_VAL, base + EMIF_EXT_PHY_CTRL_18_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_19_VAL, base + EMIF_EXT_PHY_CTRL_19_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_20_VAL, base + EMIF_EXT_PHY_CTRL_20_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_21_VAL, base + EMIF_EXT_PHY_CTRL_21_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_22_VAL, base + EMIF_EXT_PHY_CTRL_22_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_23_VAL, base + EMIF_EXT_PHY_CTRL_23_SHDW);
|
|
writel(EMIF_EXT_PHY_CTRL_24_VAL, base + EMIF_EXT_PHY_CTRL_24_SHDW);
|
|
}
|
|
|
|
static void get_default_timings(struct emif_data *emif)
|
|
{
|
|
struct emif_platform_data *pd = emif->plat_data;
|
|
|
|
pd->timings = lpddr2_jedec_timings;
|
|
pd->timings_arr_size = ARRAY_SIZE(lpddr2_jedec_timings);
|
|
|
|
dev_warn(emif->dev, "%s: using default timings\n", __func__);
|
|
}
|
|
|
|
static int is_dev_data_valid(u32 type, u32 density, u32 io_width, u32 phy_type,
|
|
u32 ip_rev, struct device *dev)
|
|
{
|
|
int valid;
|
|
|
|
valid = (type == DDR_TYPE_LPDDR2_S4 ||
|
|
type == DDR_TYPE_LPDDR2_S2)
|
|
&& (density >= DDR_DENSITY_64Mb
|
|
&& density <= DDR_DENSITY_8Gb)
|
|
&& (io_width >= DDR_IO_WIDTH_8
|
|
&& io_width <= DDR_IO_WIDTH_32);
|
|
|
|
/* Combinations of EMIF and PHY revisions that we support today */
|
|
switch (ip_rev) {
|
|
case EMIF_4D:
|
|
valid = valid && (phy_type == EMIF_PHY_TYPE_ATTILAPHY);
|
|
break;
|
|
case EMIF_4D5:
|
|
valid = valid && (phy_type == EMIF_PHY_TYPE_INTELLIPHY);
|
|
break;
|
|
default:
|
|
valid = 0;
|
|
}
|
|
|
|
if (!valid)
|
|
dev_err(dev, "%s: invalid DDR details\n", __func__);
|
|
return valid;
|
|
}
|
|
|
|
static int is_custom_config_valid(struct emif_custom_configs *cust_cfgs,
|
|
struct device *dev)
|
|
{
|
|
int valid = 1;
|
|
|
|
if ((cust_cfgs->mask & EMIF_CUSTOM_CONFIG_LPMODE) &&
|
|
(cust_cfgs->lpmode != EMIF_LP_MODE_DISABLE))
|
|
valid = cust_cfgs->lpmode_freq_threshold &&
|
|
cust_cfgs->lpmode_timeout_performance &&
|
|
cust_cfgs->lpmode_timeout_power;
|
|
|
|
if (cust_cfgs->mask & EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL)
|
|
valid = valid && cust_cfgs->temp_alert_poll_interval_ms;
|
|
|
|
if (!valid)
|
|
dev_warn(dev, "%s: invalid custom configs\n", __func__);
|
|
|
|
return valid;
|
|
}
|
|
|
|
#if defined(CONFIG_OF)
|
|
static void __init_or_module of_get_custom_configs(struct device_node *np_emif,
|
|
struct emif_data *emif)
|
|
{
|
|
struct emif_custom_configs *cust_cfgs = NULL;
|
|
int len;
|
|
const __be32 *lpmode, *poll_intvl;
|
|
|
|
lpmode = of_get_property(np_emif, "low-power-mode", &len);
|
|
poll_intvl = of_get_property(np_emif, "temp-alert-poll-interval", &len);
|
|
|
|
if (lpmode || poll_intvl)
|
|
cust_cfgs = devm_kzalloc(emif->dev, sizeof(*cust_cfgs),
|
|
GFP_KERNEL);
|
|
|
|
if (!cust_cfgs)
|
|
return;
|
|
|
|
if (lpmode) {
|
|
cust_cfgs->mask |= EMIF_CUSTOM_CONFIG_LPMODE;
|
|
cust_cfgs->lpmode = be32_to_cpup(lpmode);
|
|
of_property_read_u32(np_emif,
|
|
"low-power-mode-timeout-performance",
|
|
&cust_cfgs->lpmode_timeout_performance);
|
|
of_property_read_u32(np_emif,
|
|
"low-power-mode-timeout-power",
|
|
&cust_cfgs->lpmode_timeout_power);
|
|
of_property_read_u32(np_emif,
|
|
"low-power-mode-freq-threshold",
|
|
&cust_cfgs->lpmode_freq_threshold);
|
|
}
|
|
|
|
if (poll_intvl) {
|
|
cust_cfgs->mask |=
|
|
EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL;
|
|
cust_cfgs->temp_alert_poll_interval_ms =
|
|
be32_to_cpup(poll_intvl);
|
|
}
|
|
|
|
if (of_find_property(np_emif, "extended-temp-part", &len))
|
|
cust_cfgs->mask |= EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART;
|
|
|
|
if (!is_custom_config_valid(cust_cfgs, emif->dev)) {
|
|
devm_kfree(emif->dev, cust_cfgs);
|
|
return;
|
|
}
|
|
|
|
emif->plat_data->custom_configs = cust_cfgs;
|
|
}
|
|
|
|
static void __init_or_module of_get_ddr_info(struct device_node *np_emif,
|
|
struct device_node *np_ddr,
|
|
struct ddr_device_info *dev_info)
|
|
{
|
|
u32 density = 0, io_width = 0;
|
|
int len;
|
|
|
|
if (of_find_property(np_emif, "cs1-used", &len))
|
|
dev_info->cs1_used = true;
|
|
|
|
if (of_find_property(np_emif, "cal-resistor-per-cs", &len))
|
|
dev_info->cal_resistors_per_cs = true;
|
|
|
|
if (of_device_is_compatible(np_ddr, "jedec,lpddr2-s4"))
|
|
dev_info->type = DDR_TYPE_LPDDR2_S4;
|
|
else if (of_device_is_compatible(np_ddr, "jedec,lpddr2-s2"))
|
|
dev_info->type = DDR_TYPE_LPDDR2_S2;
|
|
|
|
of_property_read_u32(np_ddr, "density", &density);
|
|
of_property_read_u32(np_ddr, "io-width", &io_width);
|
|
|
|
/* Convert from density in Mb to the density encoding in jedc_ddr.h */
|
|
if (density & (density - 1))
|
|
dev_info->density = 0;
|
|
else
|
|
dev_info->density = __fls(density) - 5;
|
|
|
|
/* Convert from io_width in bits to io_width encoding in jedc_ddr.h */
|
|
if (io_width & (io_width - 1))
|
|
dev_info->io_width = 0;
|
|
else
|
|
dev_info->io_width = __fls(io_width) - 1;
|
|
}
|
|
|
|
static struct emif_data * __init_or_module of_get_memory_device_details(
|
|
struct device_node *np_emif, struct device *dev)
|
|
{
|
|
struct emif_data *emif = NULL;
|
|
struct ddr_device_info *dev_info = NULL;
|
|
struct emif_platform_data *pd = NULL;
|
|
struct device_node *np_ddr;
|
|
int len;
|
|
|
|
np_ddr = of_parse_phandle(np_emif, "device-handle", 0);
|
|
if (!np_ddr)
|
|
goto error;
|
|
emif = devm_kzalloc(dev, sizeof(struct emif_data), GFP_KERNEL);
|
|
pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
|
|
dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
|
|
|
|
if (!emif || !pd || !dev_info) {
|
|
dev_err(dev, "%s: Out of memory!!\n",
|
|
__func__);
|
|
goto error;
|
|
}
|
|
|
|
emif->plat_data = pd;
|
|
pd->device_info = dev_info;
|
|
emif->dev = dev;
|
|
emif->np_ddr = np_ddr;
|
|
emif->temperature_level = SDRAM_TEMP_NOMINAL;
|
|
|
|
if (of_device_is_compatible(np_emif, "ti,emif-4d"))
|
|
emif->plat_data->ip_rev = EMIF_4D;
|
|
else if (of_device_is_compatible(np_emif, "ti,emif-4d5"))
|
|
emif->plat_data->ip_rev = EMIF_4D5;
|
|
|
|
of_property_read_u32(np_emif, "phy-type", &pd->phy_type);
|
|
|
|
if (of_find_property(np_emif, "hw-caps-ll-interface", &len))
|
|
pd->hw_caps |= EMIF_HW_CAPS_LL_INTERFACE;
|
|
|
|
of_get_ddr_info(np_emif, np_ddr, dev_info);
|
|
if (!is_dev_data_valid(pd->device_info->type, pd->device_info->density,
|
|
pd->device_info->io_width, pd->phy_type, pd->ip_rev,
|
|
emif->dev)) {
|
|
dev_err(dev, "%s: invalid device data!!\n", __func__);
|
|
goto error;
|
|
}
|
|
/*
|
|
* For EMIF instances other than EMIF1 see if the devices connected
|
|
* are exactly same as on EMIF1(which is typically the case). If so,
|
|
* mark it as a duplicate of EMIF1. This will save some memory and
|
|
* computation.
|
|
*/
|
|
if (emif1 && emif1->np_ddr == np_ddr) {
|
|
emif->duplicate = true;
|
|
goto out;
|
|
} else if (emif1) {
|
|
dev_warn(emif->dev, "%s: Non-symmetric DDR geometry\n",
|
|
__func__);
|
|
}
|
|
|
|
of_get_custom_configs(np_emif, emif);
|
|
emif->plat_data->timings = of_get_ddr_timings(np_ddr, emif->dev,
|
|
emif->plat_data->device_info->type,
|
|
&emif->plat_data->timings_arr_size);
|
|
|
|
emif->plat_data->min_tck = of_get_min_tck(np_ddr, emif->dev);
|
|
goto out;
|
|
|
|
error:
|
|
return NULL;
|
|
out:
|
|
return emif;
|
|
}
|
|
|
|
#else
|
|
|
|
static struct emif_data * __init_or_module of_get_memory_device_details(
|
|
struct device_node *np_emif, struct device *dev)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
static struct emif_data *__init_or_module get_device_details(
|
|
struct platform_device *pdev)
|
|
{
|
|
u32 size;
|
|
struct emif_data *emif = NULL;
|
|
struct ddr_device_info *dev_info;
|
|
struct emif_custom_configs *cust_cfgs;
|
|
struct emif_platform_data *pd;
|
|
struct device *dev;
|
|
void *temp;
|
|
|
|
pd = pdev->dev.platform_data;
|
|
dev = &pdev->dev;
|
|
|
|
if (!(pd && pd->device_info && is_dev_data_valid(pd->device_info->type,
|
|
pd->device_info->density, pd->device_info->io_width,
|
|
pd->phy_type, pd->ip_rev, dev))) {
|
|
dev_err(dev, "%s: invalid device data\n", __func__);
|
|
goto error;
|
|
}
|
|
|
|
emif = devm_kzalloc(dev, sizeof(*emif), GFP_KERNEL);
|
|
temp = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
|
|
dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);
|
|
|
|
if (!emif || !pd || !dev_info) {
|
|
dev_err(dev, "%s:%d: allocation error\n", __func__, __LINE__);
|
|
goto error;
|
|
}
|
|
|
|
memcpy(temp, pd, sizeof(*pd));
|
|
pd = temp;
|
|
memcpy(dev_info, pd->device_info, sizeof(*dev_info));
|
|
|
|
pd->device_info = dev_info;
|
|
emif->plat_data = pd;
|
|
emif->dev = dev;
|
|
emif->temperature_level = SDRAM_TEMP_NOMINAL;
|
|
|
|
/*
|
|
* For EMIF instances other than EMIF1 see if the devices connected
|
|
* are exactly same as on EMIF1(which is typically the case). If so,
|
|
* mark it as a duplicate of EMIF1 and skip copying timings data.
|
|
* This will save some memory and some computation later.
|
|
*/
|
|
emif->duplicate = emif1 && (memcmp(dev_info,
|
|
emif1->plat_data->device_info,
|
|
sizeof(struct ddr_device_info)) == 0);
|
|
|
|
if (emif->duplicate) {
|
|
pd->timings = NULL;
|
|
pd->min_tck = NULL;
|
|
goto out;
|
|
} else if (emif1) {
|
|
dev_warn(emif->dev, "%s: Non-symmetric DDR geometry\n",
|
|
__func__);
|
|
}
|
|
|
|
/*
|
|
* Copy custom configs - ignore allocation error, if any, as
|
|
* custom_configs is not very critical
|
|
*/
|
|
cust_cfgs = pd->custom_configs;
|
|
if (cust_cfgs && is_custom_config_valid(cust_cfgs, dev)) {
|
|
temp = devm_kzalloc(dev, sizeof(*cust_cfgs), GFP_KERNEL);
|
|
if (temp)
|
|
memcpy(temp, cust_cfgs, sizeof(*cust_cfgs));
|
|
else
|
|
dev_warn(dev, "%s:%d: allocation error\n", __func__,
|
|
__LINE__);
|
|
pd->custom_configs = temp;
|
|
}
|
|
|
|
/*
|
|
* Copy timings and min-tck values from platform data. If it is not
|
|
* available or if memory allocation fails, use JEDEC defaults
|
|
*/
|
|
size = sizeof(struct lpddr2_timings) * pd->timings_arr_size;
|
|
if (pd->timings) {
|
|
temp = devm_kzalloc(dev, size, GFP_KERNEL);
|
|
if (temp) {
|
|
memcpy(temp, pd->timings, size);
|
|
pd->timings = temp;
|
|
} else {
|
|
dev_warn(dev, "%s:%d: allocation error\n", __func__,
|
|
__LINE__);
|
|
get_default_timings(emif);
|
|
}
|
|
} else {
|
|
get_default_timings(emif);
|
|
}
|
|
|
|
if (pd->min_tck) {
|
|
temp = devm_kzalloc(dev, sizeof(*pd->min_tck), GFP_KERNEL);
|
|
if (temp) {
|
|
memcpy(temp, pd->min_tck, sizeof(*pd->min_tck));
|
|
pd->min_tck = temp;
|
|
} else {
|
|
dev_warn(dev, "%s:%d: allocation error\n", __func__,
|
|
__LINE__);
|
|
pd->min_tck = &lpddr2_jedec_min_tck;
|
|
}
|
|
} else {
|
|
pd->min_tck = &lpddr2_jedec_min_tck;
|
|
}
|
|
|
|
out:
|
|
return emif;
|
|
|
|
error:
|
|
return NULL;
|
|
}
|
|
|
|
static int __init_or_module emif_probe(struct platform_device *pdev)
|
|
{
|
|
struct emif_data *emif;
|
|
struct resource *res;
|
|
int irq;
|
|
|
|
if (pdev->dev.of_node)
|
|
emif = of_get_memory_device_details(pdev->dev.of_node, &pdev->dev);
|
|
else
|
|
emif = get_device_details(pdev);
|
|
|
|
if (!emif) {
|
|
pr_err("%s: error getting device data\n", __func__);
|
|
goto error;
|
|
}
|
|
|
|
list_add(&emif->node, &device_list);
|
|
emif->addressing = get_addressing_table(emif->plat_data->device_info);
|
|
|
|
/* Save pointers to each other in emif and device structures */
|
|
emif->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, emif);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
emif->base = devm_ioremap_resource(emif->dev, res);
|
|
if (IS_ERR(emif->base))
|
|
goto error;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
goto error;
|
|
|
|
emif_onetime_settings(emif);
|
|
emif_debugfs_init(emif);
|
|
disable_and_clear_all_interrupts(emif);
|
|
setup_interrupts(emif, irq);
|
|
|
|
/* One-time actions taken on probing the first device */
|
|
if (!emif1) {
|
|
emif1 = emif;
|
|
|
|
/*
|
|
* TODO: register notifiers for frequency and voltage
|
|
* change here once the respective frameworks are
|
|
* available
|
|
*/
|
|
}
|
|
|
|
dev_info(&pdev->dev, "%s: device configured with addr = %p and IRQ%d\n",
|
|
__func__, emif->base, irq);
|
|
|
|
return 0;
|
|
error:
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int __exit emif_remove(struct platform_device *pdev)
|
|
{
|
|
struct emif_data *emif = platform_get_drvdata(pdev);
|
|
|
|
emif_debugfs_exit(emif);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void emif_shutdown(struct platform_device *pdev)
|
|
{
|
|
struct emif_data *emif = platform_get_drvdata(pdev);
|
|
|
|
disable_and_clear_all_interrupts(emif);
|
|
}
|
|
|
|
static int get_emif_reg_values(struct emif_data *emif, u32 freq,
|
|
struct emif_regs *regs)
|
|
{
|
|
u32 ip_rev, phy_type;
|
|
u32 cl, type;
|
|
const struct lpddr2_timings *timings;
|
|
const struct lpddr2_min_tck *min_tck;
|
|
const struct ddr_device_info *device_info;
|
|
const struct lpddr2_addressing *addressing;
|
|
struct emif_data *emif_for_calc;
|
|
struct device *dev;
|
|
|
|
dev = emif->dev;
|
|
/*
|
|
* If the devices on this EMIF instance is duplicate of EMIF1,
|
|
* use EMIF1 details for the calculation
|
|
*/
|
|
emif_for_calc = emif->duplicate ? emif1 : emif;
|
|
timings = get_timings_table(emif_for_calc, freq);
|
|
addressing = emif_for_calc->addressing;
|
|
if (!timings || !addressing) {
|
|
dev_err(dev, "%s: not enough data available for %dHz",
|
|
__func__, freq);
|
|
return -1;
|
|
}
|
|
|
|
device_info = emif_for_calc->plat_data->device_info;
|
|
type = device_info->type;
|
|
ip_rev = emif_for_calc->plat_data->ip_rev;
|
|
phy_type = emif_for_calc->plat_data->phy_type;
|
|
|
|
min_tck = emif_for_calc->plat_data->min_tck;
|
|
|
|
set_ddr_clk_period(freq);
|
|
|
|
regs->ref_ctrl_shdw = get_sdram_ref_ctrl_shdw(freq, addressing);
|
|
regs->sdram_tim1_shdw = get_sdram_tim_1_shdw(timings, min_tck,
|
|
addressing);
|
|
regs->sdram_tim2_shdw = get_sdram_tim_2_shdw(timings, min_tck,
|
|
addressing, type);
|
|
regs->sdram_tim3_shdw = get_sdram_tim_3_shdw(timings, min_tck,
|
|
addressing, type, ip_rev, EMIF_NORMAL_TIMINGS);
|
|
|
|
cl = get_cl(emif);
|
|
|
|
if (phy_type == EMIF_PHY_TYPE_ATTILAPHY && ip_rev == EMIF_4D) {
|
|
regs->phy_ctrl_1_shdw = get_ddr_phy_ctrl_1_attilaphy_4d(
|
|
timings, freq, cl);
|
|
} else if (phy_type == EMIF_PHY_TYPE_INTELLIPHY && ip_rev == EMIF_4D5) {
|
|
regs->phy_ctrl_1_shdw = get_phy_ctrl_1_intelliphy_4d5(freq, cl);
|
|
regs->ext_phy_ctrl_2_shdw = get_ext_phy_ctrl_2_intelliphy_4d5();
|
|
regs->ext_phy_ctrl_3_shdw = get_ext_phy_ctrl_3_intelliphy_4d5();
|
|
regs->ext_phy_ctrl_4_shdw = get_ext_phy_ctrl_4_intelliphy_4d5();
|
|
} else {
|
|
return -1;
|
|
}
|
|
|
|
/* Only timeout values in pwr_mgmt_ctrl_shdw register */
|
|
regs->pwr_mgmt_ctrl_shdw =
|
|
get_pwr_mgmt_ctrl(freq, emif_for_calc, ip_rev) &
|
|
(CS_TIM_MASK | SR_TIM_MASK | PD_TIM_MASK);
|
|
|
|
if (ip_rev & EMIF_4D) {
|
|
regs->read_idle_ctrl_shdw_normal =
|
|
get_read_idle_ctrl_shdw(DDR_VOLTAGE_STABLE);
|
|
|
|
regs->read_idle_ctrl_shdw_volt_ramp =
|
|
get_read_idle_ctrl_shdw(DDR_VOLTAGE_RAMPING);
|
|
} else if (ip_rev & EMIF_4D5) {
|
|
regs->dll_calib_ctrl_shdw_normal =
|
|
get_dll_calib_ctrl_shdw(DDR_VOLTAGE_STABLE);
|
|
|
|
regs->dll_calib_ctrl_shdw_volt_ramp =
|
|
get_dll_calib_ctrl_shdw(DDR_VOLTAGE_RAMPING);
|
|
}
|
|
|
|
if (type == DDR_TYPE_LPDDR2_S2 || type == DDR_TYPE_LPDDR2_S4) {
|
|
regs->ref_ctrl_shdw_derated = get_sdram_ref_ctrl_shdw(freq / 4,
|
|
addressing);
|
|
|
|
regs->sdram_tim1_shdw_derated =
|
|
get_sdram_tim_1_shdw_derated(timings, min_tck,
|
|
addressing);
|
|
|
|
regs->sdram_tim3_shdw_derated = get_sdram_tim_3_shdw(timings,
|
|
min_tck, addressing, type, ip_rev,
|
|
EMIF_DERATED_TIMINGS);
|
|
}
|
|
|
|
regs->freq = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* get_regs() - gets the cached emif_regs structure for a given EMIF instance
|
|
* given frequency(freq):
|
|
*
|
|
* As an optimisation, every EMIF instance other than EMIF1 shares the
|
|
* register cache with EMIF1 if the devices connected on this instance
|
|
* are same as that on EMIF1(indicated by the duplicate flag)
|
|
*
|
|
* If we do not have an entry corresponding to the frequency given, we
|
|
* allocate a new entry and calculate the values
|
|
*
|
|
* Upon finding the right reg dump, save it in curr_regs. It can be
|
|
* directly used for thermal de-rating and voltage ramping changes.
|
|
*/
|
|
static struct emif_regs *get_regs(struct emif_data *emif, u32 freq)
|
|
{
|
|
int i;
|
|
struct emif_regs **regs_cache;
|
|
struct emif_regs *regs = NULL;
|
|
struct device *dev;
|
|
|
|
dev = emif->dev;
|
|
if (emif->curr_regs && emif->curr_regs->freq == freq) {
|
|
dev_dbg(dev, "%s: using curr_regs - %u Hz", __func__, freq);
|
|
return emif->curr_regs;
|
|
}
|
|
|
|
if (emif->duplicate)
|
|
regs_cache = emif1->regs_cache;
|
|
else
|
|
regs_cache = emif->regs_cache;
|
|
|
|
for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++) {
|
|
if (regs_cache[i]->freq == freq) {
|
|
regs = regs_cache[i];
|
|
dev_dbg(dev,
|
|
"%s: reg dump found in reg cache for %u Hz\n",
|
|
__func__, freq);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we don't have an entry for this frequency in the cache create one
|
|
* and calculate the values
|
|
*/
|
|
if (!regs) {
|
|
regs = devm_kzalloc(emif->dev, sizeof(*regs), GFP_ATOMIC);
|
|
if (!regs)
|
|
return NULL;
|
|
|
|
if (get_emif_reg_values(emif, freq, regs)) {
|
|
devm_kfree(emif->dev, regs);
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Now look for an un-used entry in the cache and save the
|
|
* newly created struct. If there are no free entries
|
|
* over-write the last entry
|
|
*/
|
|
for (i = 0; i < EMIF_MAX_NUM_FREQUENCIES && regs_cache[i]; i++)
|
|
;
|
|
|
|
if (i >= EMIF_MAX_NUM_FREQUENCIES) {
|
|
dev_warn(dev, "%s: regs_cache full - reusing a slot!!\n",
|
|
__func__);
|
|
i = EMIF_MAX_NUM_FREQUENCIES - 1;
|
|
devm_kfree(emif->dev, regs_cache[i]);
|
|
}
|
|
regs_cache[i] = regs;
|
|
}
|
|
|
|
return regs;
|
|
}
|
|
|
|
static void do_volt_notify_handling(struct emif_data *emif, u32 volt_state)
|
|
{
|
|
dev_dbg(emif->dev, "%s: voltage notification : %d", __func__,
|
|
volt_state);
|
|
|
|
if (!emif->curr_regs) {
|
|
dev_err(emif->dev,
|
|
"%s: volt-notify before registers are ready: %d\n",
|
|
__func__, volt_state);
|
|
return;
|
|
}
|
|
|
|
setup_volt_sensitive_regs(emif, emif->curr_regs, volt_state);
|
|
}
|
|
|
|
/*
|
|
* TODO: voltage notify handling should be hooked up to
|
|
* regulator framework as soon as the necessary support
|
|
* is available in mainline kernel. This function is un-used
|
|
* right now.
|
|
*/
|
|
static void __attribute__((unused)) volt_notify_handling(u32 volt_state)
|
|
{
|
|
struct emif_data *emif;
|
|
|
|
spin_lock_irqsave(&emif_lock, irq_state);
|
|
|
|
list_for_each_entry(emif, &device_list, node)
|
|
do_volt_notify_handling(emif, volt_state);
|
|
do_freq_update();
|
|
|
|
spin_unlock_irqrestore(&emif_lock, irq_state);
|
|
}
|
|
|
|
static void do_freq_pre_notify_handling(struct emif_data *emif, u32 new_freq)
|
|
{
|
|
struct emif_regs *regs;
|
|
|
|
regs = get_regs(emif, new_freq);
|
|
if (!regs)
|
|
return;
|
|
|
|
emif->curr_regs = regs;
|
|
|
|
/*
|
|
* Update the shadow registers:
|
|
* Temperature and voltage-ramp sensitive settings are also configured
|
|
* in terms of DDR cycles. So, we need to update them too when there
|
|
* is a freq change
|
|
*/
|
|
dev_dbg(emif->dev, "%s: setting up shadow registers for %uHz",
|
|
__func__, new_freq);
|
|
setup_registers(emif, regs);
|
|
setup_temperature_sensitive_regs(emif, regs);
|
|
setup_volt_sensitive_regs(emif, regs, DDR_VOLTAGE_STABLE);
|
|
|
|
/*
|
|
* Part of workaround for errata i728. See do_freq_update()
|
|
* for more details
|
|
*/
|
|
if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
|
|
set_lpmode(emif, EMIF_LP_MODE_DISABLE);
|
|
}
|
|
|
|
/*
|
|
* TODO: frequency notify handling should be hooked up to
|
|
* clock framework as soon as the necessary support is
|
|
* available in mainline kernel. This function is un-used
|
|
* right now.
|
|
*/
|
|
static void __attribute__((unused)) freq_pre_notify_handling(u32 new_freq)
|
|
{
|
|
struct emif_data *emif;
|
|
|
|
/*
|
|
* NOTE: we are taking the spin-lock here and releases it
|
|
* only in post-notifier. This doesn't look good and
|
|
* Sparse complains about it, but this seems to be
|
|
* un-avoidable. We need to lock a sequence of events
|
|
* that is split between EMIF and clock framework.
|
|
*
|
|
* 1. EMIF driver updates EMIF timings in shadow registers in the
|
|
* frequency pre-notify callback from clock framework
|
|
* 2. clock framework sets up the registers for the new frequency
|
|
* 3. clock framework initiates a hw-sequence that updates
|
|
* the frequency EMIF timings synchronously.
|
|
*
|
|
* All these 3 steps should be performed as an atomic operation
|
|
* vis-a-vis similar sequence in the EMIF interrupt handler
|
|
* for temperature events. Otherwise, there could be race
|
|
* conditions that could result in incorrect EMIF timings for
|
|
* a given frequency
|
|
*/
|
|
spin_lock_irqsave(&emif_lock, irq_state);
|
|
|
|
list_for_each_entry(emif, &device_list, node)
|
|
do_freq_pre_notify_handling(emif, new_freq);
|
|
}
|
|
|
|
static void do_freq_post_notify_handling(struct emif_data *emif)
|
|
{
|
|
/*
|
|
* Part of workaround for errata i728. See do_freq_update()
|
|
* for more details
|
|
*/
|
|
if (emif->lpmode == EMIF_LP_MODE_SELF_REFRESH)
|
|
set_lpmode(emif, EMIF_LP_MODE_SELF_REFRESH);
|
|
}
|
|
|
|
/*
|
|
* TODO: frequency notify handling should be hooked up to
|
|
* clock framework as soon as the necessary support is
|
|
* available in mainline kernel. This function is un-used
|
|
* right now.
|
|
*/
|
|
static void __attribute__((unused)) freq_post_notify_handling(void)
|
|
{
|
|
struct emif_data *emif;
|
|
|
|
list_for_each_entry(emif, &device_list, node)
|
|
do_freq_post_notify_handling(emif);
|
|
|
|
/*
|
|
* Lock is done in pre-notify handler. See freq_pre_notify_handling()
|
|
* for more details
|
|
*/
|
|
spin_unlock_irqrestore(&emif_lock, irq_state);
|
|
}
|
|
|
|
#if defined(CONFIG_OF)
|
|
static const struct of_device_id emif_of_match[] = {
|
|
{ .compatible = "ti,emif-4d" },
|
|
{ .compatible = "ti,emif-4d5" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, emif_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver emif_driver = {
|
|
.remove = __exit_p(emif_remove),
|
|
.shutdown = emif_shutdown,
|
|
.driver = {
|
|
.name = "emif",
|
|
.of_match_table = of_match_ptr(emif_of_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(emif_driver, emif_probe);
|
|
|
|
MODULE_DESCRIPTION("TI EMIF SDRAM Controller Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:emif");
|
|
MODULE_AUTHOR("Texas Instruments Inc");
|