linux-stable/drivers/pwm/pwm-lpss-pci.c
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00

127 lines
3 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Intel Low Power Subsystem PWM controller PCI driver
*
* Copyright (C) 2014, Intel Corporation
*
* Derived from the original pwm-lpss.c
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include "pwm-lpss.h"
/* BayTrail */
static const struct pwm_lpss_boardinfo pwm_lpss_byt_info = {
.clk_rate = 25000000,
.npwm = 1,
.base_unit_bits = 16,
};
/* Braswell */
static const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = {
.clk_rate = 19200000,
.npwm = 1,
.base_unit_bits = 16,
};
/* Broxton */
static const struct pwm_lpss_boardinfo pwm_lpss_bxt_info = {
.clk_rate = 19200000,
.npwm = 4,
.base_unit_bits = 22,
.bypass = true,
};
/* Tangier */
static const struct pwm_lpss_boardinfo pwm_lpss_tng_info = {
.clk_rate = 19200000,
.npwm = 4,
.base_unit_bits = 22,
};
static int pwm_lpss_probe_pci(struct pci_dev *pdev,
const struct pci_device_id *id)
{
const struct pwm_lpss_boardinfo *info;
struct pwm_lpss_chip *lpwm;
int err;
err = pcim_enable_device(pdev);
if (err < 0)
return err;
info = (struct pwm_lpss_boardinfo *)id->driver_data;
lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
if (IS_ERR(lpwm))
return PTR_ERR(lpwm);
pci_set_drvdata(pdev, lpwm);
pm_runtime_put(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
}
static void pwm_lpss_remove_pci(struct pci_dev *pdev)
{
struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev);
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
pwm_lpss_remove(lpwm);
}
#ifdef CONFIG_PM
static int pwm_lpss_runtime_suspend_pci(struct device *dev)
{
/*
* The PCI core will handle transition to D3 automatically. We only
* need to provide runtime PM hooks for that to happen.
*/
return 0;
}
static int pwm_lpss_runtime_resume_pci(struct device *dev)
{
return 0;
}
#endif
static const struct dev_pm_ops pwm_lpss_pci_pm = {
SET_RUNTIME_PM_OPS(pwm_lpss_runtime_suspend_pci,
pwm_lpss_runtime_resume_pci, NULL)
};
static const struct pci_device_id pwm_lpss_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x0ac8), (unsigned long)&pwm_lpss_bxt_info},
{ PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&pwm_lpss_byt_info},
{ PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&pwm_lpss_byt_info},
{ PCI_VDEVICE(INTEL, 0x11a5), (unsigned long)&pwm_lpss_tng_info},
{ PCI_VDEVICE(INTEL, 0x1ac8), (unsigned long)&pwm_lpss_bxt_info},
{ PCI_VDEVICE(INTEL, 0x2288), (unsigned long)&pwm_lpss_bsw_info},
{ PCI_VDEVICE(INTEL, 0x2289), (unsigned long)&pwm_lpss_bsw_info},
{ PCI_VDEVICE(INTEL, 0x31c8), (unsigned long)&pwm_lpss_bxt_info},
{ PCI_VDEVICE(INTEL, 0x5ac8), (unsigned long)&pwm_lpss_bxt_info},
{ },
};
MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids);
static struct pci_driver pwm_lpss_driver_pci = {
.name = "pwm-lpss",
.id_table = pwm_lpss_pci_ids,
.probe = pwm_lpss_probe_pci,
.remove = pwm_lpss_remove_pci,
.driver = {
.pm = &pwm_lpss_pci_pm,
},
};
module_pci_driver(pwm_lpss_driver_pci);
MODULE_DESCRIPTION("PWM PCI driver for Intel LPSS");
MODULE_LICENSE("GPL v2");