linux-stable/drivers/pwm/pwm-spear.c
Uwe Kleine-König f9a8ee8c8b pwm: Always allocate PWM chip base ID dynamically
Since commit 5e5da1e9fb ("pwm: ab8500: Explicitly allocate pwm chip
base dynamically") all drivers use dynamic ID allocation explicitly. New
drivers are supposed to do the same, so remove support for driver
specified base IDs and drop all assignments in the low-level drivers.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22 11:53:00 +01:00

263 lines
6.4 KiB
C

/*
* ST Microelectronics SPEAr Pulse Width Modulator driver
*
* Copyright (C) 2012 ST Microelectronics
* Shiraz Hashim <shiraz.linux.kernel@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
#include <linux/types.h>
#define NUM_PWM 4
/* PWM registers and bits definitions */
#define PWMCR 0x00 /* Control Register */
#define PWMCR_PWM_ENABLE 0x1
#define PWMCR_PRESCALE_SHIFT 2
#define PWMCR_MIN_PRESCALE 0x00
#define PWMCR_MAX_PRESCALE 0x3FFF
#define PWMDCR 0x04 /* Duty Cycle Register */
#define PWMDCR_MIN_DUTY 0x0001
#define PWMDCR_MAX_DUTY 0xFFFF
#define PWMPCR 0x08 /* Period Register */
#define PWMPCR_MIN_PERIOD 0x0001
#define PWMPCR_MAX_PERIOD 0xFFFF
/* Following only available on 13xx SoCs */
#define PWMMCR 0x3C /* Master Control Register */
#define PWMMCR_PWM_ENABLE 0x1
/**
* struct spear_pwm_chip - struct representing pwm chip
*
* @mmio_base: base address of pwm chip
* @clk: pointer to clk structure of pwm chip
* @chip: linux pwm chip representation
*/
struct spear_pwm_chip {
void __iomem *mmio_base;
struct clk *clk;
struct pwm_chip chip;
};
static inline struct spear_pwm_chip *to_spear_pwm_chip(struct pwm_chip *chip)
{
return container_of(chip, struct spear_pwm_chip, chip);
}
static inline u32 spear_pwm_readl(struct spear_pwm_chip *chip, unsigned int num,
unsigned long offset)
{
return readl_relaxed(chip->mmio_base + (num << 4) + offset);
}
static inline void spear_pwm_writel(struct spear_pwm_chip *chip,
unsigned int num, unsigned long offset,
unsigned long val)
{
writel_relaxed(val, chip->mmio_base + (num << 4) + offset);
}
static int spear_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
u64 val, div, clk_rate;
unsigned long prescale = PWMCR_MIN_PRESCALE, pv, dc;
int ret;
/*
* Find pv, dc and prescale to suit duty_ns and period_ns. This is done
* according to formulas described below:
*
* period_ns = 10^9 * (PRESCALE + 1) * PV / PWM_CLK_RATE
* duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
*
* PV = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
* DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
*/
clk_rate = clk_get_rate(pc->clk);
while (1) {
div = 1000000000;
div *= 1 + prescale;
val = clk_rate * period_ns;
pv = div64_u64(val, div);
val = clk_rate * duty_ns;
dc = div64_u64(val, div);
/* if duty_ns and period_ns are not achievable then return */
if (pv < PWMPCR_MIN_PERIOD || dc < PWMDCR_MIN_DUTY)
return -EINVAL;
/*
* if pv and dc have crossed their upper limit, then increase
* prescale and recalculate pv and dc.
*/
if (pv > PWMPCR_MAX_PERIOD || dc > PWMDCR_MAX_DUTY) {
if (++prescale > PWMCR_MAX_PRESCALE)
return -EINVAL;
continue;
}
break;
}
/*
* NOTE: the clock to PWM has to be enabled first before writing to the
* registers.
*/
ret = clk_enable(pc->clk);
if (ret)
return ret;
spear_pwm_writel(pc, pwm->hwpwm, PWMCR,
prescale << PWMCR_PRESCALE_SHIFT);
spear_pwm_writel(pc, pwm->hwpwm, PWMDCR, dc);
spear_pwm_writel(pc, pwm->hwpwm, PWMPCR, pv);
clk_disable(pc->clk);
return 0;
}
static int spear_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
int rc = 0;
u32 val;
rc = clk_enable(pc->clk);
if (rc)
return rc;
val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
val |= PWMCR_PWM_ENABLE;
spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
return 0;
}
static void spear_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct spear_pwm_chip *pc = to_spear_pwm_chip(chip);
u32 val;
val = spear_pwm_readl(pc, pwm->hwpwm, PWMCR);
val &= ~PWMCR_PWM_ENABLE;
spear_pwm_writel(pc, pwm->hwpwm, PWMCR, val);
clk_disable(pc->clk);
}
static const struct pwm_ops spear_pwm_ops = {
.config = spear_pwm_config,
.enable = spear_pwm_enable,
.disable = spear_pwm_disable,
.owner = THIS_MODULE,
};
static int spear_pwm_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct spear_pwm_chip *pc;
int ret;
u32 val;
pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
if (!pc)
return -ENOMEM;
pc->mmio_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(pc->mmio_base))
return PTR_ERR(pc->mmio_base);
pc->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pc->clk))
return PTR_ERR(pc->clk);
platform_set_drvdata(pdev, pc);
pc->chip.dev = &pdev->dev;
pc->chip.ops = &spear_pwm_ops;
pc->chip.npwm = NUM_PWM;
ret = clk_prepare(pc->clk);
if (ret)
return ret;
if (of_device_is_compatible(np, "st,spear1340-pwm")) {
ret = clk_enable(pc->clk);
if (ret) {
clk_unprepare(pc->clk);
return ret;
}
/*
* Following enables PWM chip, channels would still be
* enabled individually through their control register
*/
val = readl_relaxed(pc->mmio_base + PWMMCR);
val |= PWMMCR_PWM_ENABLE;
writel_relaxed(val, pc->mmio_base + PWMMCR);
clk_disable(pc->clk);
}
ret = pwmchip_add(&pc->chip);
if (ret < 0) {
clk_unprepare(pc->clk);
dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
}
return ret;
}
static int spear_pwm_remove(struct platform_device *pdev)
{
struct spear_pwm_chip *pc = platform_get_drvdata(pdev);
int i;
for (i = 0; i < NUM_PWM; i++)
pwm_disable(&pc->chip.pwms[i]);
/* clk was prepared in probe, hence unprepare it here */
clk_unprepare(pc->clk);
return pwmchip_remove(&pc->chip);
}
static const struct of_device_id spear_pwm_of_match[] = {
{ .compatible = "st,spear320-pwm" },
{ .compatible = "st,spear1340-pwm" },
{ }
};
MODULE_DEVICE_TABLE(of, spear_pwm_of_match);
static struct platform_driver spear_pwm_driver = {
.driver = {
.name = "spear-pwm",
.of_match_table = spear_pwm_of_match,
},
.probe = spear_pwm_probe,
.remove = spear_pwm_remove,
};
module_platform_driver(spear_pwm_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>");
MODULE_ALIAS("platform:spear-pwm");