mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Peng Fan](/assets/img/avatar_default.png)
Introduce an extra parameter is_iomem to da_to_va, then the caller could take the memory as normal memory or io mapped memory. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-5-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
1480 lines
41 KiB
C
1480 lines
41 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* TI K3 R5F (MCU) Remote Processor driver
|
|
*
|
|
* Copyright (C) 2017-2020 Texas Instruments Incorporated - https://www.ti.com/
|
|
* Suman Anna <s-anna@ti.com>
|
|
*/
|
|
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mailbox_client.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_reserved_mem.h>
|
|
#include <linux/omap-mailbox.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/remoteproc.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "omap_remoteproc.h"
|
|
#include "remoteproc_internal.h"
|
|
#include "ti_sci_proc.h"
|
|
|
|
/* This address can either be for ATCM or BTCM with the other at address 0x0 */
|
|
#define K3_R5_TCM_DEV_ADDR 0x41010000
|
|
|
|
/* R5 TI-SCI Processor Configuration Flags */
|
|
#define PROC_BOOT_CFG_FLAG_R5_DBG_EN 0x00000001
|
|
#define PROC_BOOT_CFG_FLAG_R5_DBG_NIDEN 0x00000002
|
|
#define PROC_BOOT_CFG_FLAG_R5_LOCKSTEP 0x00000100
|
|
#define PROC_BOOT_CFG_FLAG_R5_TEINIT 0x00000200
|
|
#define PROC_BOOT_CFG_FLAG_R5_NMFI_EN 0x00000400
|
|
#define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE 0x00000800
|
|
#define PROC_BOOT_CFG_FLAG_R5_BTCM_EN 0x00001000
|
|
#define PROC_BOOT_CFG_FLAG_R5_ATCM_EN 0x00002000
|
|
/* Available from J7200 SoCs onwards */
|
|
#define PROC_BOOT_CFG_FLAG_R5_MEM_INIT_DIS 0x00004000
|
|
|
|
/* R5 TI-SCI Processor Control Flags */
|
|
#define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT 0x00000001
|
|
|
|
/* R5 TI-SCI Processor Status Flags */
|
|
#define PROC_BOOT_STATUS_FLAG_R5_WFE 0x00000001
|
|
#define PROC_BOOT_STATUS_FLAG_R5_WFI 0x00000002
|
|
#define PROC_BOOT_STATUS_FLAG_R5_CLK_GATED 0x00000004
|
|
#define PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED 0x00000100
|
|
|
|
/**
|
|
* struct k3_r5_mem - internal memory structure
|
|
* @cpu_addr: MPU virtual address of the memory region
|
|
* @bus_addr: Bus address used to access the memory region
|
|
* @dev_addr: Device address from remoteproc view
|
|
* @size: Size of the memory region
|
|
*/
|
|
struct k3_r5_mem {
|
|
void __iomem *cpu_addr;
|
|
phys_addr_t bus_addr;
|
|
u32 dev_addr;
|
|
size_t size;
|
|
};
|
|
|
|
enum cluster_mode {
|
|
CLUSTER_MODE_SPLIT = 0,
|
|
CLUSTER_MODE_LOCKSTEP,
|
|
};
|
|
|
|
/**
|
|
* struct k3_r5_soc_data - match data to handle SoC variations
|
|
* @tcm_is_double: flag to denote the larger unified TCMs in certain modes
|
|
* @tcm_ecc_autoinit: flag to denote the auto-initialization of TCMs for ECC
|
|
*/
|
|
struct k3_r5_soc_data {
|
|
bool tcm_is_double;
|
|
bool tcm_ecc_autoinit;
|
|
};
|
|
|
|
/**
|
|
* struct k3_r5_cluster - K3 R5F Cluster structure
|
|
* @dev: cached device pointer
|
|
* @mode: Mode to configure the Cluster - Split or LockStep
|
|
* @cores: list of R5 cores within the cluster
|
|
* @soc_data: SoC-specific feature data for a R5FSS
|
|
*/
|
|
struct k3_r5_cluster {
|
|
struct device *dev;
|
|
enum cluster_mode mode;
|
|
struct list_head cores;
|
|
const struct k3_r5_soc_data *soc_data;
|
|
};
|
|
|
|
/**
|
|
* struct k3_r5_core - K3 R5 core structure
|
|
* @elem: linked list item
|
|
* @dev: cached device pointer
|
|
* @rproc: rproc handle representing this core
|
|
* @mem: internal memory regions data
|
|
* @sram: on-chip SRAM memory regions data
|
|
* @num_mems: number of internal memory regions
|
|
* @num_sram: number of on-chip SRAM memory regions
|
|
* @reset: reset control handle
|
|
* @tsp: TI-SCI processor control handle
|
|
* @ti_sci: TI-SCI handle
|
|
* @ti_sci_id: TI-SCI device identifier
|
|
* @atcm_enable: flag to control ATCM enablement
|
|
* @btcm_enable: flag to control BTCM enablement
|
|
* @loczrama: flag to dictate which TCM is at device address 0x0
|
|
*/
|
|
struct k3_r5_core {
|
|
struct list_head elem;
|
|
struct device *dev;
|
|
struct rproc *rproc;
|
|
struct k3_r5_mem *mem;
|
|
struct k3_r5_mem *sram;
|
|
int num_mems;
|
|
int num_sram;
|
|
struct reset_control *reset;
|
|
struct ti_sci_proc *tsp;
|
|
const struct ti_sci_handle *ti_sci;
|
|
u32 ti_sci_id;
|
|
u32 atcm_enable;
|
|
u32 btcm_enable;
|
|
u32 loczrama;
|
|
};
|
|
|
|
/**
|
|
* struct k3_r5_rproc - K3 remote processor state
|
|
* @dev: cached device pointer
|
|
* @cluster: cached pointer to parent cluster structure
|
|
* @mbox: mailbox channel handle
|
|
* @client: mailbox client to request the mailbox channel
|
|
* @rproc: rproc handle
|
|
* @core: cached pointer to r5 core structure being used
|
|
* @rmem: reserved memory regions data
|
|
* @num_rmems: number of reserved memory regions
|
|
*/
|
|
struct k3_r5_rproc {
|
|
struct device *dev;
|
|
struct k3_r5_cluster *cluster;
|
|
struct mbox_chan *mbox;
|
|
struct mbox_client client;
|
|
struct rproc *rproc;
|
|
struct k3_r5_core *core;
|
|
struct k3_r5_mem *rmem;
|
|
int num_rmems;
|
|
};
|
|
|
|
/**
|
|
* k3_r5_rproc_mbox_callback() - inbound mailbox message handler
|
|
* @client: mailbox client pointer used for requesting the mailbox channel
|
|
* @data: mailbox payload
|
|
*
|
|
* This handler is invoked by the OMAP mailbox driver whenever a mailbox
|
|
* message is received. Usually, the mailbox payload simply contains
|
|
* the index of the virtqueue that is kicked by the remote processor,
|
|
* and we let remoteproc core handle it.
|
|
*
|
|
* In addition to virtqueue indices, we also have some out-of-band values
|
|
* that indicate different events. Those values are deliberately very
|
|
* large so they don't coincide with virtqueue indices.
|
|
*/
|
|
static void k3_r5_rproc_mbox_callback(struct mbox_client *client, void *data)
|
|
{
|
|
struct k3_r5_rproc *kproc = container_of(client, struct k3_r5_rproc,
|
|
client);
|
|
struct device *dev = kproc->rproc->dev.parent;
|
|
const char *name = kproc->rproc->name;
|
|
u32 msg = omap_mbox_message(data);
|
|
|
|
dev_dbg(dev, "mbox msg: 0x%x\n", msg);
|
|
|
|
switch (msg) {
|
|
case RP_MBOX_CRASH:
|
|
/*
|
|
* remoteproc detected an exception, but error recovery is not
|
|
* supported. So, just log this for now
|
|
*/
|
|
dev_err(dev, "K3 R5F rproc %s crashed\n", name);
|
|
break;
|
|
case RP_MBOX_ECHO_REPLY:
|
|
dev_info(dev, "received echo reply from %s\n", name);
|
|
break;
|
|
default:
|
|
/* silently handle all other valid messages */
|
|
if (msg >= RP_MBOX_READY && msg < RP_MBOX_END_MSG)
|
|
return;
|
|
if (msg > kproc->rproc->max_notifyid) {
|
|
dev_dbg(dev, "dropping unknown message 0x%x", msg);
|
|
return;
|
|
}
|
|
/* msg contains the index of the triggered vring */
|
|
if (rproc_vq_interrupt(kproc->rproc, msg) == IRQ_NONE)
|
|
dev_dbg(dev, "no message was found in vqid %d\n", msg);
|
|
}
|
|
}
|
|
|
|
/* kick a virtqueue */
|
|
static void k3_r5_rproc_kick(struct rproc *rproc, int vqid)
|
|
{
|
|
struct k3_r5_rproc *kproc = rproc->priv;
|
|
struct device *dev = rproc->dev.parent;
|
|
mbox_msg_t msg = (mbox_msg_t)vqid;
|
|
int ret;
|
|
|
|
/* send the index of the triggered virtqueue in the mailbox payload */
|
|
ret = mbox_send_message(kproc->mbox, (void *)msg);
|
|
if (ret < 0)
|
|
dev_err(dev, "failed to send mailbox message, status = %d\n",
|
|
ret);
|
|
}
|
|
|
|
static int k3_r5_split_reset(struct k3_r5_core *core)
|
|
{
|
|
int ret;
|
|
|
|
ret = reset_control_assert(core->reset);
|
|
if (ret) {
|
|
dev_err(core->dev, "local-reset assert failed, ret = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = core->ti_sci->ops.dev_ops.put_device(core->ti_sci,
|
|
core->ti_sci_id);
|
|
if (ret) {
|
|
dev_err(core->dev, "module-reset assert failed, ret = %d\n",
|
|
ret);
|
|
if (reset_control_deassert(core->reset))
|
|
dev_warn(core->dev, "local-reset deassert back failed\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5_split_release(struct k3_r5_core *core)
|
|
{
|
|
int ret;
|
|
|
|
ret = core->ti_sci->ops.dev_ops.get_device(core->ti_sci,
|
|
core->ti_sci_id);
|
|
if (ret) {
|
|
dev_err(core->dev, "module-reset deassert failed, ret = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_control_deassert(core->reset);
|
|
if (ret) {
|
|
dev_err(core->dev, "local-reset deassert failed, ret = %d\n",
|
|
ret);
|
|
if (core->ti_sci->ops.dev_ops.put_device(core->ti_sci,
|
|
core->ti_sci_id))
|
|
dev_warn(core->dev, "module-reset assert back failed\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5_lockstep_reset(struct k3_r5_cluster *cluster)
|
|
{
|
|
struct k3_r5_core *core;
|
|
int ret;
|
|
|
|
/* assert local reset on all applicable cores */
|
|
list_for_each_entry(core, &cluster->cores, elem) {
|
|
ret = reset_control_assert(core->reset);
|
|
if (ret) {
|
|
dev_err(core->dev, "local-reset assert failed, ret = %d\n",
|
|
ret);
|
|
core = list_prev_entry(core, elem);
|
|
goto unroll_local_reset;
|
|
}
|
|
}
|
|
|
|
/* disable PSC modules on all applicable cores */
|
|
list_for_each_entry(core, &cluster->cores, elem) {
|
|
ret = core->ti_sci->ops.dev_ops.put_device(core->ti_sci,
|
|
core->ti_sci_id);
|
|
if (ret) {
|
|
dev_err(core->dev, "module-reset assert failed, ret = %d\n",
|
|
ret);
|
|
goto unroll_module_reset;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
unroll_module_reset:
|
|
list_for_each_entry_continue_reverse(core, &cluster->cores, elem) {
|
|
if (core->ti_sci->ops.dev_ops.put_device(core->ti_sci,
|
|
core->ti_sci_id))
|
|
dev_warn(core->dev, "module-reset assert back failed\n");
|
|
}
|
|
core = list_last_entry(&cluster->cores, struct k3_r5_core, elem);
|
|
unroll_local_reset:
|
|
list_for_each_entry_from_reverse(core, &cluster->cores, elem) {
|
|
if (reset_control_deassert(core->reset))
|
|
dev_warn(core->dev, "local-reset deassert back failed\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5_lockstep_release(struct k3_r5_cluster *cluster)
|
|
{
|
|
struct k3_r5_core *core;
|
|
int ret;
|
|
|
|
/* enable PSC modules on all applicable cores */
|
|
list_for_each_entry_reverse(core, &cluster->cores, elem) {
|
|
ret = core->ti_sci->ops.dev_ops.get_device(core->ti_sci,
|
|
core->ti_sci_id);
|
|
if (ret) {
|
|
dev_err(core->dev, "module-reset deassert failed, ret = %d\n",
|
|
ret);
|
|
core = list_next_entry(core, elem);
|
|
goto unroll_module_reset;
|
|
}
|
|
}
|
|
|
|
/* deassert local reset on all applicable cores */
|
|
list_for_each_entry_reverse(core, &cluster->cores, elem) {
|
|
ret = reset_control_deassert(core->reset);
|
|
if (ret) {
|
|
dev_err(core->dev, "module-reset deassert failed, ret = %d\n",
|
|
ret);
|
|
goto unroll_local_reset;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
unroll_local_reset:
|
|
list_for_each_entry_continue(core, &cluster->cores, elem) {
|
|
if (reset_control_assert(core->reset))
|
|
dev_warn(core->dev, "local-reset assert back failed\n");
|
|
}
|
|
core = list_first_entry(&cluster->cores, struct k3_r5_core, elem);
|
|
unroll_module_reset:
|
|
list_for_each_entry_from(core, &cluster->cores, elem) {
|
|
if (core->ti_sci->ops.dev_ops.put_device(core->ti_sci,
|
|
core->ti_sci_id))
|
|
dev_warn(core->dev, "module-reset assert back failed\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int k3_r5_core_halt(struct k3_r5_core *core)
|
|
{
|
|
return ti_sci_proc_set_control(core->tsp,
|
|
PROC_BOOT_CTRL_FLAG_R5_CORE_HALT, 0);
|
|
}
|
|
|
|
static inline int k3_r5_core_run(struct k3_r5_core *core)
|
|
{
|
|
return ti_sci_proc_set_control(core->tsp,
|
|
0, PROC_BOOT_CTRL_FLAG_R5_CORE_HALT);
|
|
}
|
|
|
|
/*
|
|
* The R5F cores have controls for both a reset and a halt/run. The code
|
|
* execution from DDR requires the initial boot-strapping code to be run
|
|
* from the internal TCMs. This function is used to release the resets on
|
|
* applicable cores to allow loading into the TCMs. The .prepare() ops is
|
|
* invoked by remoteproc core before any firmware loading, and is followed
|
|
* by the .start() ops after loading to actually let the R5 cores run.
|
|
*/
|
|
static int k3_r5_rproc_prepare(struct rproc *rproc)
|
|
{
|
|
struct k3_r5_rproc *kproc = rproc->priv;
|
|
struct k3_r5_cluster *cluster = kproc->cluster;
|
|
struct k3_r5_core *core = kproc->core;
|
|
struct device *dev = kproc->dev;
|
|
u32 ctrl = 0, cfg = 0, stat = 0;
|
|
u64 boot_vec = 0;
|
|
bool mem_init_dis;
|
|
int ret;
|
|
|
|
ret = ti_sci_proc_get_status(core->tsp, &boot_vec, &cfg, &ctrl, &stat);
|
|
if (ret < 0)
|
|
return ret;
|
|
mem_init_dis = !!(cfg & PROC_BOOT_CFG_FLAG_R5_MEM_INIT_DIS);
|
|
|
|
ret = (cluster->mode == CLUSTER_MODE_LOCKSTEP) ?
|
|
k3_r5_lockstep_release(cluster) : k3_r5_split_release(core);
|
|
if (ret) {
|
|
dev_err(dev, "unable to enable cores for TCM loading, ret = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Newer IP revisions like on J7200 SoCs support h/w auto-initialization
|
|
* of TCMs, so there is no need to perform the s/w memzero. This bit is
|
|
* configurable through System Firmware, the default value does perform
|
|
* auto-init, but account for it in case it is disabled
|
|
*/
|
|
if (cluster->soc_data->tcm_ecc_autoinit && !mem_init_dis) {
|
|
dev_dbg(dev, "leveraging h/w init for TCM memories\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Zero out both TCMs unconditionally (access from v8 Arm core is not
|
|
* affected by ATCM & BTCM enable configuration values) so that ECC
|
|
* can be effective on all TCM addresses.
|
|
*/
|
|
dev_dbg(dev, "zeroing out ATCM memory\n");
|
|
memset(core->mem[0].cpu_addr, 0x00, core->mem[0].size);
|
|
|
|
dev_dbg(dev, "zeroing out BTCM memory\n");
|
|
memset(core->mem[1].cpu_addr, 0x00, core->mem[1].size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This function implements the .unprepare() ops and performs the complimentary
|
|
* operations to that of the .prepare() ops. The function is used to assert the
|
|
* resets on all applicable cores for the rproc device (depending on LockStep
|
|
* or Split mode). This completes the second portion of powering down the R5F
|
|
* cores. The cores themselves are only halted in the .stop() ops, and the
|
|
* .unprepare() ops is invoked by the remoteproc core after the remoteproc is
|
|
* stopped.
|
|
*/
|
|
static int k3_r5_rproc_unprepare(struct rproc *rproc)
|
|
{
|
|
struct k3_r5_rproc *kproc = rproc->priv;
|
|
struct k3_r5_cluster *cluster = kproc->cluster;
|
|
struct k3_r5_core *core = kproc->core;
|
|
struct device *dev = kproc->dev;
|
|
int ret;
|
|
|
|
ret = (cluster->mode == CLUSTER_MODE_LOCKSTEP) ?
|
|
k3_r5_lockstep_reset(cluster) : k3_r5_split_reset(core);
|
|
if (ret)
|
|
dev_err(dev, "unable to disable cores, ret = %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The R5F start sequence includes two different operations
|
|
* 1. Configure the boot vector for R5F core(s)
|
|
* 2. Unhalt/Run the R5F core(s)
|
|
*
|
|
* The sequence is different between LockStep and Split modes. The LockStep
|
|
* mode requires the boot vector to be configured only for Core0, and then
|
|
* unhalt both the cores to start the execution - Core1 needs to be unhalted
|
|
* first followed by Core0. The Split-mode requires that Core0 to be maintained
|
|
* always in a higher power state that Core1 (implying Core1 needs to be started
|
|
* always only after Core0 is started).
|
|
*/
|
|
static int k3_r5_rproc_start(struct rproc *rproc)
|
|
{
|
|
struct k3_r5_rproc *kproc = rproc->priv;
|
|
struct k3_r5_cluster *cluster = kproc->cluster;
|
|
struct mbox_client *client = &kproc->client;
|
|
struct device *dev = kproc->dev;
|
|
struct k3_r5_core *core;
|
|
u32 boot_addr;
|
|
int ret;
|
|
|
|
client->dev = dev;
|
|
client->tx_done = NULL;
|
|
client->rx_callback = k3_r5_rproc_mbox_callback;
|
|
client->tx_block = false;
|
|
client->knows_txdone = false;
|
|
|
|
kproc->mbox = mbox_request_channel(client, 0);
|
|
if (IS_ERR(kproc->mbox)) {
|
|
ret = -EBUSY;
|
|
dev_err(dev, "mbox_request_channel failed: %ld\n",
|
|
PTR_ERR(kproc->mbox));
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Ping the remote processor, this is only for sanity-sake for now;
|
|
* there is no functional effect whatsoever.
|
|
*
|
|
* Note that the reply will _not_ arrive immediately: this message
|
|
* will wait in the mailbox fifo until the remote processor is booted.
|
|
*/
|
|
ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST);
|
|
if (ret < 0) {
|
|
dev_err(dev, "mbox_send_message failed: %d\n", ret);
|
|
goto put_mbox;
|
|
}
|
|
|
|
boot_addr = rproc->bootaddr;
|
|
/* TODO: add boot_addr sanity checking */
|
|
dev_dbg(dev, "booting R5F core using boot addr = 0x%x\n", boot_addr);
|
|
|
|
/* boot vector need not be programmed for Core1 in LockStep mode */
|
|
core = kproc->core;
|
|
ret = ti_sci_proc_set_config(core->tsp, boot_addr, 0, 0);
|
|
if (ret)
|
|
goto put_mbox;
|
|
|
|
/* unhalt/run all applicable cores */
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP) {
|
|
list_for_each_entry_reverse(core, &cluster->cores, elem) {
|
|
ret = k3_r5_core_run(core);
|
|
if (ret)
|
|
goto unroll_core_run;
|
|
}
|
|
} else {
|
|
ret = k3_r5_core_run(core);
|
|
if (ret)
|
|
goto put_mbox;
|
|
}
|
|
|
|
return 0;
|
|
|
|
unroll_core_run:
|
|
list_for_each_entry_continue(core, &cluster->cores, elem) {
|
|
if (k3_r5_core_halt(core))
|
|
dev_warn(core->dev, "core halt back failed\n");
|
|
}
|
|
put_mbox:
|
|
mbox_free_channel(kproc->mbox);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The R5F stop function includes the following operations
|
|
* 1. Halt R5F core(s)
|
|
*
|
|
* The sequence is different between LockStep and Split modes, and the order
|
|
* of cores the operations are performed are also in general reverse to that
|
|
* of the start function. The LockStep mode requires each operation to be
|
|
* performed first on Core0 followed by Core1. The Split-mode requires that
|
|
* Core0 to be maintained always in a higher power state that Core1 (implying
|
|
* Core1 needs to be stopped first before Core0).
|
|
*
|
|
* Note that the R5F halt operation in general is not effective when the R5F
|
|
* core is running, but is needed to make sure the core won't run after
|
|
* deasserting the reset the subsequent time. The asserting of reset can
|
|
* be done here, but is preferred to be done in the .unprepare() ops - this
|
|
* maintains the symmetric behavior between the .start(), .stop(), .prepare()
|
|
* and .unprepare() ops, and also balances them well between sysfs 'state'
|
|
* flow and device bind/unbind or module removal.
|
|
*/
|
|
static int k3_r5_rproc_stop(struct rproc *rproc)
|
|
{
|
|
struct k3_r5_rproc *kproc = rproc->priv;
|
|
struct k3_r5_cluster *cluster = kproc->cluster;
|
|
struct k3_r5_core *core = kproc->core;
|
|
int ret;
|
|
|
|
/* halt all applicable cores */
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP) {
|
|
list_for_each_entry(core, &cluster->cores, elem) {
|
|
ret = k3_r5_core_halt(core);
|
|
if (ret) {
|
|
core = list_prev_entry(core, elem);
|
|
goto unroll_core_halt;
|
|
}
|
|
}
|
|
} else {
|
|
ret = k3_r5_core_halt(core);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
|
|
mbox_free_channel(kproc->mbox);
|
|
|
|
return 0;
|
|
|
|
unroll_core_halt:
|
|
list_for_each_entry_from_reverse(core, &cluster->cores, elem) {
|
|
if (k3_r5_core_run(core))
|
|
dev_warn(core->dev, "core run back failed\n");
|
|
}
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Internal Memory translation helper
|
|
*
|
|
* Custom function implementing the rproc .da_to_va ops to provide address
|
|
* translation (device address to kernel virtual address) for internal RAMs
|
|
* present in a DSP or IPU device). The translated addresses can be used
|
|
* either by the remoteproc core for loading, or by any rpmsg bus drivers.
|
|
*/
|
|
static void *k3_r5_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem)
|
|
{
|
|
struct k3_r5_rproc *kproc = rproc->priv;
|
|
struct k3_r5_core *core = kproc->core;
|
|
void __iomem *va = NULL;
|
|
phys_addr_t bus_addr;
|
|
u32 dev_addr, offset;
|
|
size_t size;
|
|
int i;
|
|
|
|
if (len == 0)
|
|
return NULL;
|
|
|
|
/* handle both R5 and SoC views of ATCM and BTCM */
|
|
for (i = 0; i < core->num_mems; i++) {
|
|
bus_addr = core->mem[i].bus_addr;
|
|
dev_addr = core->mem[i].dev_addr;
|
|
size = core->mem[i].size;
|
|
|
|
/* handle R5-view addresses of TCMs */
|
|
if (da >= dev_addr && ((da + len) <= (dev_addr + size))) {
|
|
offset = da - dev_addr;
|
|
va = core->mem[i].cpu_addr + offset;
|
|
return (__force void *)va;
|
|
}
|
|
|
|
/* handle SoC-view addresses of TCMs */
|
|
if (da >= bus_addr && ((da + len) <= (bus_addr + size))) {
|
|
offset = da - bus_addr;
|
|
va = core->mem[i].cpu_addr + offset;
|
|
return (__force void *)va;
|
|
}
|
|
}
|
|
|
|
/* handle any SRAM regions using SoC-view addresses */
|
|
for (i = 0; i < core->num_sram; i++) {
|
|
dev_addr = core->sram[i].dev_addr;
|
|
size = core->sram[i].size;
|
|
|
|
if (da >= dev_addr && ((da + len) <= (dev_addr + size))) {
|
|
offset = da - dev_addr;
|
|
va = core->sram[i].cpu_addr + offset;
|
|
return (__force void *)va;
|
|
}
|
|
}
|
|
|
|
/* handle static DDR reserved memory regions */
|
|
for (i = 0; i < kproc->num_rmems; i++) {
|
|
dev_addr = kproc->rmem[i].dev_addr;
|
|
size = kproc->rmem[i].size;
|
|
|
|
if (da >= dev_addr && ((da + len) <= (dev_addr + size))) {
|
|
offset = da - dev_addr;
|
|
va = kproc->rmem[i].cpu_addr + offset;
|
|
return (__force void *)va;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static const struct rproc_ops k3_r5_rproc_ops = {
|
|
.prepare = k3_r5_rproc_prepare,
|
|
.unprepare = k3_r5_rproc_unprepare,
|
|
.start = k3_r5_rproc_start,
|
|
.stop = k3_r5_rproc_stop,
|
|
.kick = k3_r5_rproc_kick,
|
|
.da_to_va = k3_r5_rproc_da_to_va,
|
|
};
|
|
|
|
/*
|
|
* Internal R5F Core configuration
|
|
*
|
|
* Each R5FSS has a cluster-level setting for configuring the processor
|
|
* subsystem either in a safety/fault-tolerant LockStep mode or a performance
|
|
* oriented Split mode. Each R5F core has a number of settings to either
|
|
* enable/disable each of the TCMs, control which TCM appears at the R5F core's
|
|
* address 0x0. These settings need to be configured before the resets for the
|
|
* corresponding core are released. These settings are all protected and managed
|
|
* by the System Processor.
|
|
*
|
|
* This function is used to pre-configure these settings for each R5F core, and
|
|
* the configuration is all done through various ti_sci_proc functions that
|
|
* communicate with the System Processor. The function also ensures that both
|
|
* the cores are halted before the .prepare() step.
|
|
*
|
|
* The function is called from k3_r5_cluster_rproc_init() and is invoked either
|
|
* once (in LockStep mode) or twice (in Split mode). Support for LockStep-mode
|
|
* is dictated by an eFUSE register bit, and the config settings retrieved from
|
|
* DT are adjusted accordingly as per the permitted cluster mode. All cluster
|
|
* level settings like Cluster mode and TEINIT (exception handling state
|
|
* dictating ARM or Thumb mode) can only be set and retrieved using Core0.
|
|
*
|
|
* The function behavior is different based on the cluster mode. The R5F cores
|
|
* are configured independently as per their individual settings in Split mode.
|
|
* They are identically configured in LockStep mode using the primary Core0
|
|
* settings. However, some individual settings cannot be set in LockStep mode.
|
|
* This is overcome by switching to Split-mode initially and then programming
|
|
* both the cores with the same settings, before reconfiguing again for
|
|
* LockStep mode.
|
|
*/
|
|
static int k3_r5_rproc_configure(struct k3_r5_rproc *kproc)
|
|
{
|
|
struct k3_r5_cluster *cluster = kproc->cluster;
|
|
struct device *dev = kproc->dev;
|
|
struct k3_r5_core *core0, *core, *temp;
|
|
u32 ctrl = 0, cfg = 0, stat = 0;
|
|
u32 set_cfg = 0, clr_cfg = 0;
|
|
u64 boot_vec = 0;
|
|
bool lockstep_en;
|
|
int ret;
|
|
|
|
core0 = list_first_entry(&cluster->cores, struct k3_r5_core, elem);
|
|
core = (cluster->mode == CLUSTER_MODE_LOCKSTEP) ? core0 : kproc->core;
|
|
|
|
ret = ti_sci_proc_get_status(core->tsp, &boot_vec, &cfg, &ctrl,
|
|
&stat);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev_dbg(dev, "boot_vector = 0x%llx, cfg = 0x%x ctrl = 0x%x stat = 0x%x\n",
|
|
boot_vec, cfg, ctrl, stat);
|
|
|
|
lockstep_en = !!(stat & PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED);
|
|
if (!lockstep_en && cluster->mode == CLUSTER_MODE_LOCKSTEP) {
|
|
dev_err(cluster->dev, "lockstep mode not permitted, force configuring for split-mode\n");
|
|
cluster->mode = CLUSTER_MODE_SPLIT;
|
|
}
|
|
|
|
/* always enable ARM mode and set boot vector to 0 */
|
|
boot_vec = 0x0;
|
|
if (core == core0) {
|
|
clr_cfg = PROC_BOOT_CFG_FLAG_R5_TEINIT;
|
|
/*
|
|
* LockStep configuration bit is Read-only on Split-mode _only_
|
|
* devices and system firmware will NACK any requests with the
|
|
* bit configured, so program it only on permitted devices
|
|
*/
|
|
if (lockstep_en)
|
|
clr_cfg |= PROC_BOOT_CFG_FLAG_R5_LOCKSTEP;
|
|
}
|
|
|
|
if (core->atcm_enable)
|
|
set_cfg |= PROC_BOOT_CFG_FLAG_R5_ATCM_EN;
|
|
else
|
|
clr_cfg |= PROC_BOOT_CFG_FLAG_R5_ATCM_EN;
|
|
|
|
if (core->btcm_enable)
|
|
set_cfg |= PROC_BOOT_CFG_FLAG_R5_BTCM_EN;
|
|
else
|
|
clr_cfg |= PROC_BOOT_CFG_FLAG_R5_BTCM_EN;
|
|
|
|
if (core->loczrama)
|
|
set_cfg |= PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE;
|
|
else
|
|
clr_cfg |= PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE;
|
|
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP) {
|
|
/*
|
|
* work around system firmware limitations to make sure both
|
|
* cores are programmed symmetrically in LockStep. LockStep
|
|
* and TEINIT config is only allowed with Core0.
|
|
*/
|
|
list_for_each_entry(temp, &cluster->cores, elem) {
|
|
ret = k3_r5_core_halt(temp);
|
|
if (ret)
|
|
goto out;
|
|
|
|
if (temp != core) {
|
|
clr_cfg &= ~PROC_BOOT_CFG_FLAG_R5_LOCKSTEP;
|
|
clr_cfg &= ~PROC_BOOT_CFG_FLAG_R5_TEINIT;
|
|
}
|
|
ret = ti_sci_proc_set_config(temp->tsp, boot_vec,
|
|
set_cfg, clr_cfg);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
|
|
set_cfg = PROC_BOOT_CFG_FLAG_R5_LOCKSTEP;
|
|
clr_cfg = 0;
|
|
ret = ti_sci_proc_set_config(core->tsp, boot_vec,
|
|
set_cfg, clr_cfg);
|
|
} else {
|
|
ret = k3_r5_core_halt(core);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = ti_sci_proc_set_config(core->tsp, boot_vec,
|
|
set_cfg, clr_cfg);
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5_reserved_mem_init(struct k3_r5_rproc *kproc)
|
|
{
|
|
struct device *dev = kproc->dev;
|
|
struct device_node *np = dev_of_node(dev);
|
|
struct device_node *rmem_np;
|
|
struct reserved_mem *rmem;
|
|
int num_rmems;
|
|
int ret, i;
|
|
|
|
num_rmems = of_property_count_elems_of_size(np, "memory-region",
|
|
sizeof(phandle));
|
|
if (num_rmems <= 0) {
|
|
dev_err(dev, "device does not have reserved memory regions, ret = %d\n",
|
|
num_rmems);
|
|
return -EINVAL;
|
|
}
|
|
if (num_rmems < 2) {
|
|
dev_err(dev, "device needs atleast two memory regions to be defined, num = %d\n",
|
|
num_rmems);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* use reserved memory region 0 for vring DMA allocations */
|
|
ret = of_reserved_mem_device_init_by_idx(dev, np, 0);
|
|
if (ret) {
|
|
dev_err(dev, "device cannot initialize DMA pool, ret = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
num_rmems--;
|
|
kproc->rmem = kcalloc(num_rmems, sizeof(*kproc->rmem), GFP_KERNEL);
|
|
if (!kproc->rmem) {
|
|
ret = -ENOMEM;
|
|
goto release_rmem;
|
|
}
|
|
|
|
/* use remaining reserved memory regions for static carveouts */
|
|
for (i = 0; i < num_rmems; i++) {
|
|
rmem_np = of_parse_phandle(np, "memory-region", i + 1);
|
|
if (!rmem_np) {
|
|
ret = -EINVAL;
|
|
goto unmap_rmem;
|
|
}
|
|
|
|
rmem = of_reserved_mem_lookup(rmem_np);
|
|
if (!rmem) {
|
|
of_node_put(rmem_np);
|
|
ret = -EINVAL;
|
|
goto unmap_rmem;
|
|
}
|
|
of_node_put(rmem_np);
|
|
|
|
kproc->rmem[i].bus_addr = rmem->base;
|
|
/*
|
|
* R5Fs do not have an MMU, but have a Region Address Translator
|
|
* (RAT) module that provides a fixed entry translation between
|
|
* the 32-bit processor addresses to 64-bit bus addresses. The
|
|
* RAT is programmable only by the R5F cores. Support for RAT
|
|
* is currently not supported, so 64-bit address regions are not
|
|
* supported. The absence of MMUs implies that the R5F device
|
|
* addresses/supported memory regions are restricted to 32-bit
|
|
* bus addresses, and are identical
|
|
*/
|
|
kproc->rmem[i].dev_addr = (u32)rmem->base;
|
|
kproc->rmem[i].size = rmem->size;
|
|
kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size);
|
|
if (!kproc->rmem[i].cpu_addr) {
|
|
dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n",
|
|
i + 1, &rmem->base, &rmem->size);
|
|
ret = -ENOMEM;
|
|
goto unmap_rmem;
|
|
}
|
|
|
|
dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n",
|
|
i + 1, &kproc->rmem[i].bus_addr,
|
|
kproc->rmem[i].size, kproc->rmem[i].cpu_addr,
|
|
kproc->rmem[i].dev_addr);
|
|
}
|
|
kproc->num_rmems = num_rmems;
|
|
|
|
return 0;
|
|
|
|
unmap_rmem:
|
|
for (i--; i >= 0; i--)
|
|
iounmap(kproc->rmem[i].cpu_addr);
|
|
kfree(kproc->rmem);
|
|
release_rmem:
|
|
of_reserved_mem_device_release(dev);
|
|
return ret;
|
|
}
|
|
|
|
static void k3_r5_reserved_mem_exit(struct k3_r5_rproc *kproc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < kproc->num_rmems; i++)
|
|
iounmap(kproc->rmem[i].cpu_addr);
|
|
kfree(kproc->rmem);
|
|
|
|
of_reserved_mem_device_release(kproc->dev);
|
|
}
|
|
|
|
/*
|
|
* Each R5F core within a typical R5FSS instance has a total of 64 KB of TCMs,
|
|
* split equally into two 32 KB banks between ATCM and BTCM. The TCMs from both
|
|
* cores are usable in Split-mode, but only the Core0 TCMs can be used in
|
|
* LockStep-mode. The newer revisions of the R5FSS IP maximizes these TCMs by
|
|
* leveraging the Core1 TCMs as well in certain modes where they would have
|
|
* otherwise been unusable (Eg: LockStep-mode on J7200 SoCs). This is done by
|
|
* making a Core1 TCM visible immediately after the corresponding Core0 TCM.
|
|
* The SoC memory map uses the larger 64 KB sizes for the Core0 TCMs, and the
|
|
* dts representation reflects this increased size on supported SoCs. The Core0
|
|
* TCM sizes therefore have to be adjusted to only half the original size in
|
|
* Split mode.
|
|
*/
|
|
static void k3_r5_adjust_tcm_sizes(struct k3_r5_rproc *kproc)
|
|
{
|
|
struct k3_r5_cluster *cluster = kproc->cluster;
|
|
struct k3_r5_core *core = kproc->core;
|
|
struct device *cdev = core->dev;
|
|
struct k3_r5_core *core0;
|
|
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP ||
|
|
!cluster->soc_data->tcm_is_double)
|
|
return;
|
|
|
|
core0 = list_first_entry(&cluster->cores, struct k3_r5_core, elem);
|
|
if (core == core0) {
|
|
WARN_ON(core->mem[0].size != SZ_64K);
|
|
WARN_ON(core->mem[1].size != SZ_64K);
|
|
|
|
core->mem[0].size /= 2;
|
|
core->mem[1].size /= 2;
|
|
|
|
dev_dbg(cdev, "adjusted TCM sizes, ATCM = 0x%zx BTCM = 0x%zx\n",
|
|
core->mem[0].size, core->mem[1].size);
|
|
}
|
|
}
|
|
|
|
static int k3_r5_cluster_rproc_init(struct platform_device *pdev)
|
|
{
|
|
struct k3_r5_cluster *cluster = platform_get_drvdata(pdev);
|
|
struct device *dev = &pdev->dev;
|
|
struct k3_r5_rproc *kproc;
|
|
struct k3_r5_core *core, *core1;
|
|
struct device *cdev;
|
|
const char *fw_name;
|
|
struct rproc *rproc;
|
|
int ret;
|
|
|
|
core1 = list_last_entry(&cluster->cores, struct k3_r5_core, elem);
|
|
list_for_each_entry(core, &cluster->cores, elem) {
|
|
cdev = core->dev;
|
|
ret = rproc_of_parse_firmware(cdev, 0, &fw_name);
|
|
if (ret) {
|
|
dev_err(dev, "failed to parse firmware-name property, ret = %d\n",
|
|
ret);
|
|
goto out;
|
|
}
|
|
|
|
rproc = rproc_alloc(cdev, dev_name(cdev), &k3_r5_rproc_ops,
|
|
fw_name, sizeof(*kproc));
|
|
if (!rproc) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
/* K3 R5s have a Region Address Translator (RAT) but no MMU */
|
|
rproc->has_iommu = false;
|
|
/* error recovery is not supported at present */
|
|
rproc->recovery_disabled = true;
|
|
|
|
kproc = rproc->priv;
|
|
kproc->cluster = cluster;
|
|
kproc->core = core;
|
|
kproc->dev = cdev;
|
|
kproc->rproc = rproc;
|
|
core->rproc = rproc;
|
|
|
|
ret = k3_r5_rproc_configure(kproc);
|
|
if (ret) {
|
|
dev_err(dev, "initial configure failed, ret = %d\n",
|
|
ret);
|
|
goto err_config;
|
|
}
|
|
|
|
k3_r5_adjust_tcm_sizes(kproc);
|
|
|
|
ret = k3_r5_reserved_mem_init(kproc);
|
|
if (ret) {
|
|
dev_err(dev, "reserved memory init failed, ret = %d\n",
|
|
ret);
|
|
goto err_config;
|
|
}
|
|
|
|
ret = rproc_add(rproc);
|
|
if (ret) {
|
|
dev_err(dev, "rproc_add failed, ret = %d\n", ret);
|
|
goto err_add;
|
|
}
|
|
|
|
/* create only one rproc in lockstep mode */
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP)
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_split:
|
|
rproc_del(rproc);
|
|
err_add:
|
|
k3_r5_reserved_mem_exit(kproc);
|
|
err_config:
|
|
rproc_free(rproc);
|
|
core->rproc = NULL;
|
|
out:
|
|
/* undo core0 upon any failures on core1 in split-mode */
|
|
if (cluster->mode == CLUSTER_MODE_SPLIT && core == core1) {
|
|
core = list_prev_entry(core, elem);
|
|
rproc = core->rproc;
|
|
kproc = rproc->priv;
|
|
goto err_split;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void k3_r5_cluster_rproc_exit(void *data)
|
|
{
|
|
struct k3_r5_cluster *cluster = platform_get_drvdata(data);
|
|
struct k3_r5_rproc *kproc;
|
|
struct k3_r5_core *core;
|
|
struct rproc *rproc;
|
|
|
|
/*
|
|
* lockstep mode has only one rproc associated with first core, whereas
|
|
* split-mode has two rprocs associated with each core, and requires
|
|
* that core1 be powered down first
|
|
*/
|
|
core = (cluster->mode == CLUSTER_MODE_LOCKSTEP) ?
|
|
list_first_entry(&cluster->cores, struct k3_r5_core, elem) :
|
|
list_last_entry(&cluster->cores, struct k3_r5_core, elem);
|
|
|
|
list_for_each_entry_from_reverse(core, &cluster->cores, elem) {
|
|
rproc = core->rproc;
|
|
kproc = rproc->priv;
|
|
|
|
rproc_del(rproc);
|
|
|
|
k3_r5_reserved_mem_exit(kproc);
|
|
|
|
rproc_free(rproc);
|
|
core->rproc = NULL;
|
|
}
|
|
}
|
|
|
|
static int k3_r5_core_of_get_internal_memories(struct platform_device *pdev,
|
|
struct k3_r5_core *core)
|
|
{
|
|
static const char * const mem_names[] = {"atcm", "btcm"};
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
int num_mems;
|
|
int i;
|
|
|
|
num_mems = ARRAY_SIZE(mem_names);
|
|
core->mem = devm_kcalloc(dev, num_mems, sizeof(*core->mem), GFP_KERNEL);
|
|
if (!core->mem)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num_mems; i++) {
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
mem_names[i]);
|
|
if (!res) {
|
|
dev_err(dev, "found no memory resource for %s\n",
|
|
mem_names[i]);
|
|
return -EINVAL;
|
|
}
|
|
if (!devm_request_mem_region(dev, res->start,
|
|
resource_size(res),
|
|
dev_name(dev))) {
|
|
dev_err(dev, "could not request %s region for resource\n",
|
|
mem_names[i]);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* TCMs are designed in general to support RAM-like backing
|
|
* memories. So, map these as Normal Non-Cached memories. This
|
|
* also avoids/fixes any potential alignment faults due to
|
|
* unaligned data accesses when using memcpy() or memset()
|
|
* functions (normally seen with device type memory).
|
|
*/
|
|
core->mem[i].cpu_addr = devm_ioremap_wc(dev, res->start,
|
|
resource_size(res));
|
|
if (!core->mem[i].cpu_addr) {
|
|
dev_err(dev, "failed to map %s memory\n", mem_names[i]);
|
|
return -ENOMEM;
|
|
}
|
|
core->mem[i].bus_addr = res->start;
|
|
|
|
/*
|
|
* TODO:
|
|
* The R5F cores can place ATCM & BTCM anywhere in its address
|
|
* based on the corresponding Region Registers in the System
|
|
* Control coprocessor. For now, place ATCM and BTCM at
|
|
* addresses 0 and 0x41010000 (same as the bus address on AM65x
|
|
* SoCs) based on loczrama setting
|
|
*/
|
|
if (!strcmp(mem_names[i], "atcm")) {
|
|
core->mem[i].dev_addr = core->loczrama ?
|
|
0 : K3_R5_TCM_DEV_ADDR;
|
|
} else {
|
|
core->mem[i].dev_addr = core->loczrama ?
|
|
K3_R5_TCM_DEV_ADDR : 0;
|
|
}
|
|
core->mem[i].size = resource_size(res);
|
|
|
|
dev_dbg(dev, "memory %5s: bus addr %pa size 0x%zx va %pK da 0x%x\n",
|
|
mem_names[i], &core->mem[i].bus_addr,
|
|
core->mem[i].size, core->mem[i].cpu_addr,
|
|
core->mem[i].dev_addr);
|
|
}
|
|
core->num_mems = num_mems;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int k3_r5_core_of_get_sram_memories(struct platform_device *pdev,
|
|
struct k3_r5_core *core)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *sram_np;
|
|
struct resource res;
|
|
int num_sram;
|
|
int i, ret;
|
|
|
|
num_sram = of_property_count_elems_of_size(np, "sram", sizeof(phandle));
|
|
if (num_sram <= 0) {
|
|
dev_dbg(dev, "device does not use reserved on-chip memories, num_sram = %d\n",
|
|
num_sram);
|
|
return 0;
|
|
}
|
|
|
|
core->sram = devm_kcalloc(dev, num_sram, sizeof(*core->sram), GFP_KERNEL);
|
|
if (!core->sram)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < num_sram; i++) {
|
|
sram_np = of_parse_phandle(np, "sram", i);
|
|
if (!sram_np)
|
|
return -EINVAL;
|
|
|
|
if (!of_device_is_available(sram_np)) {
|
|
of_node_put(sram_np);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = of_address_to_resource(sram_np, 0, &res);
|
|
of_node_put(sram_np);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
core->sram[i].bus_addr = res.start;
|
|
core->sram[i].dev_addr = res.start;
|
|
core->sram[i].size = resource_size(&res);
|
|
core->sram[i].cpu_addr = devm_ioremap_wc(dev, res.start,
|
|
resource_size(&res));
|
|
if (!core->sram[i].cpu_addr) {
|
|
dev_err(dev, "failed to parse and map sram%d memory at %pad\n",
|
|
i, &res.start);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev_dbg(dev, "memory sram%d: bus addr %pa size 0x%zx va %pK da 0x%x\n",
|
|
i, &core->sram[i].bus_addr,
|
|
core->sram[i].size, core->sram[i].cpu_addr,
|
|
core->sram[i].dev_addr);
|
|
}
|
|
core->num_sram = num_sram;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static
|
|
struct ti_sci_proc *k3_r5_core_of_get_tsp(struct device *dev,
|
|
const struct ti_sci_handle *sci)
|
|
{
|
|
struct ti_sci_proc *tsp;
|
|
u32 temp[2];
|
|
int ret;
|
|
|
|
ret = of_property_read_u32_array(dev_of_node(dev), "ti,sci-proc-ids",
|
|
temp, 2);
|
|
if (ret < 0)
|
|
return ERR_PTR(ret);
|
|
|
|
tsp = devm_kzalloc(dev, sizeof(*tsp), GFP_KERNEL);
|
|
if (!tsp)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
tsp->dev = dev;
|
|
tsp->sci = sci;
|
|
tsp->ops = &sci->ops.proc_ops;
|
|
tsp->proc_id = temp[0];
|
|
tsp->host_id = temp[1];
|
|
|
|
return tsp;
|
|
}
|
|
|
|
static int k3_r5_core_of_init(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev_of_node(dev);
|
|
struct k3_r5_core *core;
|
|
int ret;
|
|
|
|
if (!devres_open_group(dev, k3_r5_core_of_init, GFP_KERNEL))
|
|
return -ENOMEM;
|
|
|
|
core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
|
|
if (!core) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
core->dev = dev;
|
|
/*
|
|
* Use SoC Power-on-Reset values as default if no DT properties are
|
|
* used to dictate the TCM configurations
|
|
*/
|
|
core->atcm_enable = 0;
|
|
core->btcm_enable = 1;
|
|
core->loczrama = 1;
|
|
|
|
ret = of_property_read_u32(np, "ti,atcm-enable", &core->atcm_enable);
|
|
if (ret < 0 && ret != -EINVAL) {
|
|
dev_err(dev, "invalid format for ti,atcm-enable, ret = %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "ti,btcm-enable", &core->btcm_enable);
|
|
if (ret < 0 && ret != -EINVAL) {
|
|
dev_err(dev, "invalid format for ti,btcm-enable, ret = %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "ti,loczrama", &core->loczrama);
|
|
if (ret < 0 && ret != -EINVAL) {
|
|
dev_err(dev, "invalid format for ti,loczrama, ret = %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
core->ti_sci = devm_ti_sci_get_by_phandle(dev, "ti,sci");
|
|
if (IS_ERR(core->ti_sci)) {
|
|
ret = PTR_ERR(core->ti_sci);
|
|
if (ret != -EPROBE_DEFER) {
|
|
dev_err(dev, "failed to get ti-sci handle, ret = %d\n",
|
|
ret);
|
|
}
|
|
core->ti_sci = NULL;
|
|
goto err;
|
|
}
|
|
|
|
ret = of_property_read_u32(np, "ti,sci-dev-id", &core->ti_sci_id);
|
|
if (ret) {
|
|
dev_err(dev, "missing 'ti,sci-dev-id' property\n");
|
|
goto err;
|
|
}
|
|
|
|
core->reset = devm_reset_control_get_exclusive(dev, NULL);
|
|
if (IS_ERR_OR_NULL(core->reset)) {
|
|
ret = PTR_ERR_OR_ZERO(core->reset);
|
|
if (!ret)
|
|
ret = -ENODEV;
|
|
if (ret != -EPROBE_DEFER) {
|
|
dev_err(dev, "failed to get reset handle, ret = %d\n",
|
|
ret);
|
|
}
|
|
goto err;
|
|
}
|
|
|
|
core->tsp = k3_r5_core_of_get_tsp(dev, core->ti_sci);
|
|
if (IS_ERR(core->tsp)) {
|
|
dev_err(dev, "failed to construct ti-sci proc control, ret = %d\n",
|
|
ret);
|
|
ret = PTR_ERR(core->tsp);
|
|
goto err;
|
|
}
|
|
|
|
ret = k3_r5_core_of_get_internal_memories(pdev, core);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get internal memories, ret = %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = k3_r5_core_of_get_sram_memories(pdev, core);
|
|
if (ret) {
|
|
dev_err(dev, "failed to get sram memories, ret = %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
ret = ti_sci_proc_request(core->tsp);
|
|
if (ret < 0) {
|
|
dev_err(dev, "ti_sci_proc_request failed, ret = %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, core);
|
|
devres_close_group(dev, k3_r5_core_of_init);
|
|
|
|
return 0;
|
|
|
|
err:
|
|
devres_release_group(dev, k3_r5_core_of_init);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* free the resources explicitly since driver model is not being used
|
|
* for the child R5F devices
|
|
*/
|
|
static void k3_r5_core_of_exit(struct platform_device *pdev)
|
|
{
|
|
struct k3_r5_core *core = platform_get_drvdata(pdev);
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
|
|
ret = ti_sci_proc_release(core->tsp);
|
|
if (ret)
|
|
dev_err(dev, "failed to release proc, ret = %d\n", ret);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
devres_release_group(dev, k3_r5_core_of_init);
|
|
}
|
|
|
|
static void k3_r5_cluster_of_exit(void *data)
|
|
{
|
|
struct k3_r5_cluster *cluster = platform_get_drvdata(data);
|
|
struct platform_device *cpdev;
|
|
struct k3_r5_core *core, *temp;
|
|
|
|
list_for_each_entry_safe_reverse(core, temp, &cluster->cores, elem) {
|
|
list_del(&core->elem);
|
|
cpdev = to_platform_device(core->dev);
|
|
k3_r5_core_of_exit(cpdev);
|
|
}
|
|
}
|
|
|
|
static int k3_r5_cluster_of_init(struct platform_device *pdev)
|
|
{
|
|
struct k3_r5_cluster *cluster = platform_get_drvdata(pdev);
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev_of_node(dev);
|
|
struct platform_device *cpdev;
|
|
struct device_node *child;
|
|
struct k3_r5_core *core;
|
|
int ret;
|
|
|
|
for_each_available_child_of_node(np, child) {
|
|
cpdev = of_find_device_by_node(child);
|
|
if (!cpdev) {
|
|
ret = -ENODEV;
|
|
dev_err(dev, "could not get R5 core platform device\n");
|
|
goto fail;
|
|
}
|
|
|
|
ret = k3_r5_core_of_init(cpdev);
|
|
if (ret) {
|
|
dev_err(dev, "k3_r5_core_of_init failed, ret = %d\n",
|
|
ret);
|
|
put_device(&cpdev->dev);
|
|
goto fail;
|
|
}
|
|
|
|
core = platform_get_drvdata(cpdev);
|
|
put_device(&cpdev->dev);
|
|
list_add_tail(&core->elem, &cluster->cores);
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
k3_r5_cluster_of_exit(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev_of_node(dev);
|
|
struct k3_r5_cluster *cluster;
|
|
const struct k3_r5_soc_data *data;
|
|
int ret;
|
|
int num_cores;
|
|
|
|
data = of_device_get_match_data(&pdev->dev);
|
|
if (!data) {
|
|
dev_err(dev, "SoC-specific data is not defined\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
cluster = devm_kzalloc(dev, sizeof(*cluster), GFP_KERNEL);
|
|
if (!cluster)
|
|
return -ENOMEM;
|
|
|
|
cluster->dev = dev;
|
|
cluster->mode = CLUSTER_MODE_LOCKSTEP;
|
|
cluster->soc_data = data;
|
|
INIT_LIST_HEAD(&cluster->cores);
|
|
|
|
ret = of_property_read_u32(np, "ti,cluster-mode", &cluster->mode);
|
|
if (ret < 0 && ret != -EINVAL) {
|
|
dev_err(dev, "invalid format for ti,cluster-mode, ret = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
num_cores = of_get_available_child_count(np);
|
|
if (num_cores != 2) {
|
|
dev_err(dev, "MCU cluster requires both R5F cores to be enabled, num_cores = %d\n",
|
|
num_cores);
|
|
return -ENODEV;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, cluster);
|
|
|
|
ret = devm_of_platform_populate(dev);
|
|
if (ret) {
|
|
dev_err(dev, "devm_of_platform_populate failed, ret = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = k3_r5_cluster_of_init(pdev);
|
|
if (ret) {
|
|
dev_err(dev, "k3_r5_cluster_of_init failed, ret = %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action_or_reset(dev, k3_r5_cluster_of_exit, pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = k3_r5_cluster_rproc_init(pdev);
|
|
if (ret) {
|
|
dev_err(dev, "k3_r5_cluster_rproc_init failed, ret = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_add_action_or_reset(dev, k3_r5_cluster_rproc_exit, pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct k3_r5_soc_data am65_j721e_soc_data = {
|
|
.tcm_is_double = false,
|
|
.tcm_ecc_autoinit = false,
|
|
};
|
|
|
|
static const struct k3_r5_soc_data j7200_soc_data = {
|
|
.tcm_is_double = true,
|
|
.tcm_ecc_autoinit = true,
|
|
};
|
|
|
|
static const struct of_device_id k3_r5_of_match[] = {
|
|
{ .compatible = "ti,am654-r5fss", .data = &am65_j721e_soc_data, },
|
|
{ .compatible = "ti,j721e-r5fss", .data = &am65_j721e_soc_data, },
|
|
{ .compatible = "ti,j7200-r5fss", .data = &j7200_soc_data, },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, k3_r5_of_match);
|
|
|
|
static struct platform_driver k3_r5_rproc_driver = {
|
|
.probe = k3_r5_probe,
|
|
.driver = {
|
|
.name = "k3_r5_rproc",
|
|
.of_match_table = k3_r5_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(k3_r5_rproc_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("TI K3 R5F remote processor driver");
|
|
MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
|