mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-24 17:59:32 +00:00
![Vivek Gautam](/assets/img/avatar_default.png)
Remove unneeded semicolon. Generated by: coccinellery/semicolon/semicolon.cocci Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
383 lines
11 KiB
C
383 lines
11 KiB
C
/*
|
|
* Rockchip emmc PHY driver
|
|
*
|
|
* Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
|
|
* Copyright (C) 2016 ROCKCHIP, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/*
|
|
* The higher 16-bit of this register is used for write protection
|
|
* only if BIT(x + 16) set to 1 the BIT(x) can be written.
|
|
*/
|
|
#define HIWORD_UPDATE(val, mask, shift) \
|
|
((val) << (shift) | (mask) << ((shift) + 16))
|
|
|
|
/* Register definition */
|
|
#define GRF_EMMCPHY_CON0 0x0
|
|
#define GRF_EMMCPHY_CON1 0x4
|
|
#define GRF_EMMCPHY_CON2 0x8
|
|
#define GRF_EMMCPHY_CON3 0xc
|
|
#define GRF_EMMCPHY_CON4 0x10
|
|
#define GRF_EMMCPHY_CON5 0x14
|
|
#define GRF_EMMCPHY_CON6 0x18
|
|
#define GRF_EMMCPHY_STATUS 0x20
|
|
|
|
#define PHYCTRL_PDB_MASK 0x1
|
|
#define PHYCTRL_PDB_SHIFT 0x0
|
|
#define PHYCTRL_PDB_PWR_ON 0x1
|
|
#define PHYCTRL_PDB_PWR_OFF 0x0
|
|
#define PHYCTRL_ENDLL_MASK 0x1
|
|
#define PHYCTRL_ENDLL_SHIFT 0x1
|
|
#define PHYCTRL_ENDLL_ENABLE 0x1
|
|
#define PHYCTRL_ENDLL_DISABLE 0x0
|
|
#define PHYCTRL_CALDONE_MASK 0x1
|
|
#define PHYCTRL_CALDONE_SHIFT 0x6
|
|
#define PHYCTRL_CALDONE_DONE 0x1
|
|
#define PHYCTRL_CALDONE_GOING 0x0
|
|
#define PHYCTRL_DLLRDY_MASK 0x1
|
|
#define PHYCTRL_DLLRDY_SHIFT 0x5
|
|
#define PHYCTRL_DLLRDY_DONE 0x1
|
|
#define PHYCTRL_DLLRDY_GOING 0x0
|
|
#define PHYCTRL_FREQSEL_200M 0x0
|
|
#define PHYCTRL_FREQSEL_50M 0x1
|
|
#define PHYCTRL_FREQSEL_100M 0x2
|
|
#define PHYCTRL_FREQSEL_150M 0x3
|
|
#define PHYCTRL_FREQSEL_MASK 0x3
|
|
#define PHYCTRL_FREQSEL_SHIFT 0xc
|
|
#define PHYCTRL_DR_MASK 0x7
|
|
#define PHYCTRL_DR_SHIFT 0x4
|
|
#define PHYCTRL_DR_50OHM 0x0
|
|
#define PHYCTRL_DR_33OHM 0x1
|
|
#define PHYCTRL_DR_66OHM 0x2
|
|
#define PHYCTRL_DR_100OHM 0x3
|
|
#define PHYCTRL_DR_40OHM 0x4
|
|
#define PHYCTRL_OTAPDLYENA 0x1
|
|
#define PHYCTRL_OTAPDLYENA_MASK 0x1
|
|
#define PHYCTRL_OTAPDLYENA_SHIFT 0xb
|
|
#define PHYCTRL_OTAPDLYSEL_MASK 0xf
|
|
#define PHYCTRL_OTAPDLYSEL_SHIFT 0x7
|
|
|
|
struct rockchip_emmc_phy {
|
|
unsigned int reg_offset;
|
|
struct regmap *reg_base;
|
|
struct clk *emmcclk;
|
|
};
|
|
|
|
static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
|
|
{
|
|
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
|
|
unsigned int caldone;
|
|
unsigned int dllrdy;
|
|
unsigned int freqsel = PHYCTRL_FREQSEL_200M;
|
|
unsigned long rate;
|
|
unsigned long timeout;
|
|
|
|
/*
|
|
* Keep phyctrl_pdb and phyctrl_endll low to allow
|
|
* initialization of CALIO state M/C DFFs
|
|
*/
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
|
|
HIWORD_UPDATE(PHYCTRL_PDB_PWR_OFF,
|
|
PHYCTRL_PDB_MASK,
|
|
PHYCTRL_PDB_SHIFT));
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
|
|
HIWORD_UPDATE(PHYCTRL_ENDLL_DISABLE,
|
|
PHYCTRL_ENDLL_MASK,
|
|
PHYCTRL_ENDLL_SHIFT));
|
|
|
|
/* Already finish power_off above */
|
|
if (on_off == PHYCTRL_PDB_PWR_OFF)
|
|
return 0;
|
|
|
|
rate = clk_get_rate(rk_phy->emmcclk);
|
|
|
|
if (rate != 0) {
|
|
unsigned long ideal_rate;
|
|
unsigned long diff;
|
|
|
|
switch (rate) {
|
|
case 1 ... 74999999:
|
|
ideal_rate = 50000000;
|
|
freqsel = PHYCTRL_FREQSEL_50M;
|
|
break;
|
|
case 75000000 ... 124999999:
|
|
ideal_rate = 100000000;
|
|
freqsel = PHYCTRL_FREQSEL_100M;
|
|
break;
|
|
case 125000000 ... 174999999:
|
|
ideal_rate = 150000000;
|
|
freqsel = PHYCTRL_FREQSEL_150M;
|
|
break;
|
|
default:
|
|
ideal_rate = 200000000;
|
|
break;
|
|
}
|
|
|
|
diff = (rate > ideal_rate) ?
|
|
rate - ideal_rate : ideal_rate - rate;
|
|
|
|
/*
|
|
* In order for tuning delays to be accurate we need to be
|
|
* pretty spot on for the DLL range, so warn if we're too
|
|
* far off. Also warn if we're above the 200 MHz max. Don't
|
|
* warn for really slow rates since we won't be tuning then.
|
|
*/
|
|
if ((rate > 50000000 && diff > 15000000) || (rate > 200000000))
|
|
dev_warn(&phy->dev, "Unsupported rate: %lu\n", rate);
|
|
}
|
|
|
|
/*
|
|
* According to the user manual, calpad calibration
|
|
* cycle takes more than 2us without the minimal recommended
|
|
* value, so we may need a little margin here
|
|
*/
|
|
udelay(3);
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
|
|
HIWORD_UPDATE(PHYCTRL_PDB_PWR_ON,
|
|
PHYCTRL_PDB_MASK,
|
|
PHYCTRL_PDB_SHIFT));
|
|
|
|
/*
|
|
* According to the user manual, it asks driver to
|
|
* wait 5us for calpad busy trimming
|
|
*/
|
|
udelay(5);
|
|
regmap_read(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
|
|
&caldone);
|
|
caldone = (caldone >> PHYCTRL_CALDONE_SHIFT) & PHYCTRL_CALDONE_MASK;
|
|
if (caldone != PHYCTRL_CALDONE_DONE) {
|
|
pr_err("rockchip_emmc_phy_power: caldone timeout.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* Set the frequency of the DLL operation */
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON0,
|
|
HIWORD_UPDATE(freqsel, PHYCTRL_FREQSEL_MASK,
|
|
PHYCTRL_FREQSEL_SHIFT));
|
|
|
|
/* Turn on the DLL */
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
|
|
HIWORD_UPDATE(PHYCTRL_ENDLL_ENABLE,
|
|
PHYCTRL_ENDLL_MASK,
|
|
PHYCTRL_ENDLL_SHIFT));
|
|
|
|
/*
|
|
* We turned on the DLL even though the rate was 0 because we the
|
|
* clock might be turned on later. ...but we can't wait for the DLL
|
|
* to lock when the rate is 0 because it will never lock with no
|
|
* input clock.
|
|
*
|
|
* Technically we should be checking the lock later when the clock
|
|
* is turned on, but for now we won't.
|
|
*/
|
|
if (rate == 0)
|
|
return 0;
|
|
|
|
/*
|
|
* After enabling analog DLL circuits docs say that we need 10.2 us if
|
|
* our source clock is at 50 MHz and that lock time scales linearly
|
|
* with clock speed. If we are powering on the PHY and the card clock
|
|
* is super slow (like 100 kHZ) this could take as long as 5.1 ms as
|
|
* per the math: 10.2 us * (50000000 Hz / 100000 Hz) => 5.1 ms
|
|
* Hopefully we won't be running at 100 kHz, but we should still make
|
|
* sure we wait long enough.
|
|
*
|
|
* NOTE: There appear to be corner cases where the DLL seems to take
|
|
* extra long to lock for reasons that aren't understood. In some
|
|
* extreme cases we've seen it take up to over 10ms (!). We'll be
|
|
* generous and give it 50ms. We still busy wait here because:
|
|
* - In most cases it should be super fast.
|
|
* - This is not called lots during normal operation so it shouldn't
|
|
* be a power or performance problem to busy wait. We expect it
|
|
* only at boot / resume. In both cases, eMMC is probably on the
|
|
* critical path so busy waiting a little extra time should be OK.
|
|
*/
|
|
timeout = jiffies + msecs_to_jiffies(50);
|
|
do {
|
|
udelay(1);
|
|
|
|
regmap_read(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_STATUS,
|
|
&dllrdy);
|
|
dllrdy = (dllrdy >> PHYCTRL_DLLRDY_SHIFT) & PHYCTRL_DLLRDY_MASK;
|
|
if (dllrdy == PHYCTRL_DLLRDY_DONE)
|
|
break;
|
|
} while (!time_after(jiffies, timeout));
|
|
|
|
if (dllrdy != PHYCTRL_DLLRDY_DONE) {
|
|
pr_err("rockchip_emmc_phy_power: dllrdy timeout.\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_emmc_phy_init(struct phy *phy)
|
|
{
|
|
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
|
|
int ret = 0;
|
|
|
|
/*
|
|
* We purposely get the clock here and not in probe to avoid the
|
|
* circular dependency problem. We expect:
|
|
* - PHY driver to probe
|
|
* - SDHCI driver to start probe
|
|
* - SDHCI driver to register it's clock
|
|
* - SDHCI driver to get the PHY
|
|
* - SDHCI driver to init the PHY
|
|
*
|
|
* The clock is optional, so upon any error we just set to NULL.
|
|
*
|
|
* NOTE: we don't do anything special for EPROBE_DEFER here. Given the
|
|
* above expected use case, EPROBE_DEFER isn't sensible to expect, so
|
|
* it's just like any other error.
|
|
*/
|
|
rk_phy->emmcclk = clk_get(&phy->dev, "emmcclk");
|
|
if (IS_ERR(rk_phy->emmcclk)) {
|
|
dev_dbg(&phy->dev, "Error getting emmcclk: %d\n", ret);
|
|
rk_phy->emmcclk = NULL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rockchip_emmc_phy_exit(struct phy *phy)
|
|
{
|
|
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
|
|
|
|
clk_put(rk_phy->emmcclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_emmc_phy_power_off(struct phy *phy)
|
|
{
|
|
/* Power down emmc phy analog blocks */
|
|
return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_OFF);
|
|
}
|
|
|
|
static int rockchip_emmc_phy_power_on(struct phy *phy)
|
|
{
|
|
struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
|
|
|
|
/* Drive impedance: 50 Ohm */
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON6,
|
|
HIWORD_UPDATE(PHYCTRL_DR_50OHM,
|
|
PHYCTRL_DR_MASK,
|
|
PHYCTRL_DR_SHIFT));
|
|
|
|
/* Output tap delay: enable */
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON0,
|
|
HIWORD_UPDATE(PHYCTRL_OTAPDLYENA,
|
|
PHYCTRL_OTAPDLYENA_MASK,
|
|
PHYCTRL_OTAPDLYENA_SHIFT));
|
|
|
|
/* Output tap delay */
|
|
regmap_write(rk_phy->reg_base,
|
|
rk_phy->reg_offset + GRF_EMMCPHY_CON0,
|
|
HIWORD_UPDATE(4,
|
|
PHYCTRL_OTAPDLYSEL_MASK,
|
|
PHYCTRL_OTAPDLYSEL_SHIFT));
|
|
|
|
/* Power up emmc phy analog blocks */
|
|
return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_ON);
|
|
}
|
|
|
|
static const struct phy_ops ops = {
|
|
.init = rockchip_emmc_phy_init,
|
|
.exit = rockchip_emmc_phy_exit,
|
|
.power_on = rockchip_emmc_phy_power_on,
|
|
.power_off = rockchip_emmc_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int rockchip_emmc_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct rockchip_emmc_phy *rk_phy;
|
|
struct phy *generic_phy;
|
|
struct phy_provider *phy_provider;
|
|
struct regmap *grf;
|
|
unsigned int reg_offset;
|
|
|
|
if (!dev->parent || !dev->parent->of_node)
|
|
return -ENODEV;
|
|
|
|
grf = syscon_node_to_regmap(dev->parent->of_node);
|
|
if (IS_ERR(grf)) {
|
|
dev_err(dev, "Missing rockchip,grf property\n");
|
|
return PTR_ERR(grf);
|
|
}
|
|
|
|
rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
|
|
if (!rk_phy)
|
|
return -ENOMEM;
|
|
|
|
if (of_property_read_u32(dev->of_node, "reg", ®_offset)) {
|
|
dev_err(dev, "missing reg property in node %s\n",
|
|
dev->of_node->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rk_phy->reg_offset = reg_offset;
|
|
rk_phy->reg_base = grf;
|
|
|
|
generic_phy = devm_phy_create(dev, dev->of_node, &ops);
|
|
if (IS_ERR(generic_phy)) {
|
|
dev_err(dev, "failed to create PHY\n");
|
|
return PTR_ERR(generic_phy);
|
|
}
|
|
|
|
phy_set_drvdata(generic_phy, rk_phy);
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static const struct of_device_id rockchip_emmc_phy_dt_ids[] = {
|
|
{ .compatible = "rockchip,rk3399-emmc-phy" },
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, rockchip_emmc_phy_dt_ids);
|
|
|
|
static struct platform_driver rockchip_emmc_driver = {
|
|
.probe = rockchip_emmc_phy_probe,
|
|
.driver = {
|
|
.name = "rockchip-emmc-phy",
|
|
.of_match_table = rockchip_emmc_phy_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(rockchip_emmc_driver);
|
|
|
|
MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
|
|
MODULE_DESCRIPTION("Rockchip EMMC PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|