linux-stable/drivers/phy/phy-rockchip-usb.c
Randy Li 0f74ab59ce phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during wakeup
It is a hardware bug in RK3288, the only way to solve it is to
reset the phy.

Signed-off-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10 17:31:40 +05:30

521 lines
13 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Rockchip usb PHY driver
*
* Copyright (C) 2014 Yunzhi Li <lyz@rock-chips.com>
* Copyright (C) 2014 ROCKCHIP, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/delay.h>
static int enable_usb_uart;
#define HIWORD_UPDATE(val, mask) \
((val) | (mask) << 16)
#define UOC_CON0_SIDDQ BIT(13)
struct rockchip_usb_phys {
int reg;
const char *pll_name;
};
struct rockchip_usb_phy_base;
struct rockchip_usb_phy_pdata {
struct rockchip_usb_phys *phys;
int (*init_usb_uart)(struct regmap *grf);
int usb_uart_phy;
};
struct rockchip_usb_phy_base {
struct device *dev;
struct regmap *reg_base;
const struct rockchip_usb_phy_pdata *pdata;
};
struct rockchip_usb_phy {
struct rockchip_usb_phy_base *base;
struct device_node *np;
unsigned int reg_offset;
struct clk *clk;
struct clk *clk480m;
struct clk_hw clk480m_hw;
struct phy *phy;
bool uart_enabled;
struct reset_control *reset;
};
static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
bool siddq)
{
u32 val = HIWORD_UPDATE(siddq ? UOC_CON0_SIDDQ : 0, UOC_CON0_SIDDQ);
return regmap_write(phy->base->reg_base, phy->reg_offset, val);
}
static unsigned long rockchip_usb_phy480m_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
return 480000000;
}
static void rockchip_usb_phy480m_disable(struct clk_hw *hw)
{
struct rockchip_usb_phy *phy = container_of(hw,
struct rockchip_usb_phy,
clk480m_hw);
/* Power down usb phy analog blocks by set siddq 1 */
rockchip_usb_phy_power(phy, 1);
}
static int rockchip_usb_phy480m_enable(struct clk_hw *hw)
{
struct rockchip_usb_phy *phy = container_of(hw,
struct rockchip_usb_phy,
clk480m_hw);
/* Power up usb phy analog blocks by set siddq 0 */
return rockchip_usb_phy_power(phy, 0);
}
static int rockchip_usb_phy480m_is_enabled(struct clk_hw *hw)
{
struct rockchip_usb_phy *phy = container_of(hw,
struct rockchip_usb_phy,
clk480m_hw);
int ret;
u32 val;
ret = regmap_read(phy->base->reg_base, phy->reg_offset, &val);
if (ret < 0)
return ret;
return (val & UOC_CON0_SIDDQ) ? 0 : 1;
}
static const struct clk_ops rockchip_usb_phy480m_ops = {
.enable = rockchip_usb_phy480m_enable,
.disable = rockchip_usb_phy480m_disable,
.is_enabled = rockchip_usb_phy480m_is_enabled,
.recalc_rate = rockchip_usb_phy480m_recalc_rate,
};
static int rockchip_usb_phy_power_off(struct phy *_phy)
{
struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
if (phy->uart_enabled)
return -EBUSY;
clk_disable_unprepare(phy->clk480m);
return 0;
}
static int rockchip_usb_phy_power_on(struct phy *_phy)
{
struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
if (phy->uart_enabled)
return -EBUSY;
return clk_prepare_enable(phy->clk480m);
}
static int rockchip_usb_phy_reset(struct phy *_phy)
{
struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
if (phy->reset) {
reset_control_assert(phy->reset);
udelay(10);
reset_control_deassert(phy->reset);
}
return 0;
}
static const struct phy_ops ops = {
.power_on = rockchip_usb_phy_power_on,
.power_off = rockchip_usb_phy_power_off,
.reset = rockchip_usb_phy_reset,
.owner = THIS_MODULE,
};
static void rockchip_usb_phy_action(void *data)
{
struct rockchip_usb_phy *rk_phy = data;
if (!rk_phy->uart_enabled) {
of_clk_del_provider(rk_phy->np);
clk_unregister(rk_phy->clk480m);
}
if (rk_phy->clk)
clk_put(rk_phy->clk);
}
static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
struct device_node *child)
{
struct rockchip_usb_phy *rk_phy;
unsigned int reg_offset;
const char *clk_name;
struct clk_init_data init;
int err, i;
rk_phy = devm_kzalloc(base->dev, sizeof(*rk_phy), GFP_KERNEL);
if (!rk_phy)
return -ENOMEM;
rk_phy->base = base;
rk_phy->np = child;
if (of_property_read_u32(child, "reg", &reg_offset)) {
dev_err(base->dev, "missing reg property in node %s\n",
child->name);
return -EINVAL;
}
rk_phy->reset = of_reset_control_get(child, "phy-reset");
if (IS_ERR(rk_phy->reset))
rk_phy->reset = NULL;
rk_phy->reg_offset = reg_offset;
rk_phy->clk = of_clk_get_by_name(child, "phyclk");
if (IS_ERR(rk_phy->clk))
rk_phy->clk = NULL;
i = 0;
init.name = NULL;
while (base->pdata->phys[i].reg) {
if (base->pdata->phys[i].reg == reg_offset) {
init.name = base->pdata->phys[i].pll_name;
break;
}
i++;
}
if (!init.name) {
dev_err(base->dev, "phy data not found\n");
return -EINVAL;
}
if (enable_usb_uart && base->pdata->usb_uart_phy == i) {
dev_dbg(base->dev, "phy%d used as uart output\n", i);
rk_phy->uart_enabled = true;
} else {
if (rk_phy->clk) {
clk_name = __clk_get_name(rk_phy->clk);
init.flags = 0;
init.parent_names = &clk_name;
init.num_parents = 1;
} else {
init.flags = 0;
init.parent_names = NULL;
init.num_parents = 0;
}
init.ops = &rockchip_usb_phy480m_ops;
rk_phy->clk480m_hw.init = &init;
rk_phy->clk480m = clk_register(base->dev, &rk_phy->clk480m_hw);
if (IS_ERR(rk_phy->clk480m)) {
err = PTR_ERR(rk_phy->clk480m);
goto err_clk;
}
err = of_clk_add_provider(child, of_clk_src_simple_get,
rk_phy->clk480m);
if (err < 0)
goto err_clk_prov;
}
err = devm_add_action_or_reset(base->dev, rockchip_usb_phy_action,
rk_phy);
if (err)
return err;
rk_phy->phy = devm_phy_create(base->dev, child, &ops);
if (IS_ERR(rk_phy->phy)) {
dev_err(base->dev, "failed to create PHY\n");
return PTR_ERR(rk_phy->phy);
}
phy_set_drvdata(rk_phy->phy, rk_phy);
/*
* When acting as uart-pipe, just keep clock on otherwise
* only power up usb phy when it use, so disable it when init
*/
if (rk_phy->uart_enabled)
return clk_prepare_enable(rk_phy->clk);
else
return rockchip_usb_phy_power(rk_phy, 1);
err_clk_prov:
if (!rk_phy->uart_enabled)
clk_unregister(rk_phy->clk480m);
err_clk:
if (rk_phy->clk)
clk_put(rk_phy->clk);
return err;
}
static const struct rockchip_usb_phy_pdata rk3066a_pdata = {
.phys = (struct rockchip_usb_phys[]){
{ .reg = 0x17c, .pll_name = "sclk_otgphy0_480m" },
{ .reg = 0x188, .pll_name = "sclk_otgphy1_480m" },
{ /* sentinel */ }
},
};
static const struct rockchip_usb_phy_pdata rk3188_pdata = {
.phys = (struct rockchip_usb_phys[]){
{ .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" },
{ .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" },
{ /* sentinel */ }
},
};
#define RK3288_UOC0_CON0 0x320
#define RK3288_UOC0_CON0_COMMON_ON_N BIT(0)
#define RK3288_UOC0_CON0_DISABLE BIT(4)
#define RK3288_UOC0_CON2 0x328
#define RK3288_UOC0_CON2_SOFT_CON_SEL BIT(2)
#define RK3288_UOC0_CON3 0x32c
#define RK3288_UOC0_CON3_UTMI_SUSPENDN BIT(0)
#define RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING (1 << 1)
#define RK3288_UOC0_CON3_UTMI_OPMODE_MASK (3 << 1)
#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC (1 << 3)
#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK (3 << 3)
#define RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED BIT(5)
#define RK3288_UOC0_CON3_BYPASSDMEN BIT(6)
#define RK3288_UOC0_CON3_BYPASSSEL BIT(7)
/*
* Enable the bypass of uart2 data through the otg usb phy.
* Original description in the TRM.
* 1. Disable the OTG block by setting OTGDISABLE0 to 1b1.
* 2. Disable the pull-up resistance on the D+ line by setting
* OPMODE0[1:0] to 2b01.
* 3. To ensure that the XO, Bias, and PLL blocks are powered down in Suspend
* mode, set COMMONONN to 1b1.
* 4. Place the USB PHY in Suspend mode by setting SUSPENDM0 to 1b0.
* 5. Set BYPASSSEL0 to 1b1.
* 6. To transmit data, controls BYPASSDMEN0, and BYPASSDMDATA0.
* To receive data, monitor FSVPLUS0.
*
* The actual code in the vendor kernel does some things differently.
*/
static int __init rk3288_init_usb_uart(struct regmap *grf)
{
u32 val;
int ret;
/*
* COMMON_ON and DISABLE settings are described in the TRM,
* but were not present in the original code.
* Also disable the analog phy components to save power.
*/
val = HIWORD_UPDATE(RK3288_UOC0_CON0_COMMON_ON_N
| RK3288_UOC0_CON0_DISABLE
| UOC_CON0_SIDDQ,
RK3288_UOC0_CON0_COMMON_ON_N
| RK3288_UOC0_CON0_DISABLE
| UOC_CON0_SIDDQ);
ret = regmap_write(grf, RK3288_UOC0_CON0, val);
if (ret)
return ret;
val = HIWORD_UPDATE(RK3288_UOC0_CON2_SOFT_CON_SEL,
RK3288_UOC0_CON2_SOFT_CON_SEL);
ret = regmap_write(grf, RK3288_UOC0_CON2, val);
if (ret)
return ret;
val = HIWORD_UPDATE(RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING
| RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC
| RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED,
RK3288_UOC0_CON3_UTMI_SUSPENDN
| RK3288_UOC0_CON3_UTMI_OPMODE_MASK
| RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK
| RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED);
ret = regmap_write(grf, RK3288_UOC0_CON3, val);
if (ret)
return ret;
val = HIWORD_UPDATE(RK3288_UOC0_CON3_BYPASSSEL
| RK3288_UOC0_CON3_BYPASSDMEN,
RK3288_UOC0_CON3_BYPASSSEL
| RK3288_UOC0_CON3_BYPASSDMEN);
ret = regmap_write(grf, RK3288_UOC0_CON3, val);
if (ret)
return ret;
return 0;
}
static const struct rockchip_usb_phy_pdata rk3288_pdata = {
.phys = (struct rockchip_usb_phys[]){
{ .reg = 0x320, .pll_name = "sclk_otgphy0_480m" },
{ .reg = 0x334, .pll_name = "sclk_otgphy1_480m" },
{ .reg = 0x348, .pll_name = "sclk_otgphy2_480m" },
{ /* sentinel */ }
},
.init_usb_uart = rk3288_init_usb_uart,
.usb_uart_phy = 0,
};
static int rockchip_usb_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rockchip_usb_phy_base *phy_base;
struct phy_provider *phy_provider;
const struct of_device_id *match;
struct device_node *child;
int err;
phy_base = devm_kzalloc(dev, sizeof(*phy_base), GFP_KERNEL);
if (!phy_base)
return -ENOMEM;
match = of_match_device(dev->driver->of_match_table, dev);
if (!match || !match->data) {
dev_err(dev, "missing phy data\n");
return -EINVAL;
}
phy_base->pdata = match->data;
phy_base->dev = dev;
phy_base->reg_base = ERR_PTR(-ENODEV);
if (dev->parent && dev->parent->of_node)
phy_base->reg_base = syscon_node_to_regmap(
dev->parent->of_node);
if (IS_ERR(phy_base->reg_base))
phy_base->reg_base = syscon_regmap_lookup_by_phandle(
dev->of_node, "rockchip,grf");
if (IS_ERR(phy_base->reg_base)) {
dev_err(&pdev->dev, "Missing rockchip,grf property\n");
return PTR_ERR(phy_base->reg_base);
}
for_each_available_child_of_node(dev->of_node, child) {
err = rockchip_usb_phy_init(phy_base, child);
if (err) {
of_node_put(child);
return err;
}
}
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id rockchip_usb_phy_dt_ids[] = {
{ .compatible = "rockchip,rk3066a-usb-phy", .data = &rk3066a_pdata },
{ .compatible = "rockchip,rk3188-usb-phy", .data = &rk3188_pdata },
{ .compatible = "rockchip,rk3288-usb-phy", .data = &rk3288_pdata },
{}
};
MODULE_DEVICE_TABLE(of, rockchip_usb_phy_dt_ids);
static struct platform_driver rockchip_usb_driver = {
.probe = rockchip_usb_phy_probe,
.driver = {
.name = "rockchip-usb-phy",
.of_match_table = rockchip_usb_phy_dt_ids,
},
};
module_platform_driver(rockchip_usb_driver);
#ifndef MODULE
static int __init rockchip_init_usb_uart(void)
{
const struct of_device_id *match;
const struct rockchip_usb_phy_pdata *data;
struct device_node *np;
struct regmap *grf;
int ret;
if (!enable_usb_uart)
return 0;
np = of_find_matching_node_and_match(NULL, rockchip_usb_phy_dt_ids,
&match);
if (!np) {
pr_err("%s: failed to find usbphy node\n", __func__);
return -ENOTSUPP;
}
pr_debug("%s: using settings for %s\n", __func__, match->compatible);
data = match->data;
if (!data->init_usb_uart) {
pr_err("%s: usb-uart not available on %s\n",
__func__, match->compatible);
return -ENOTSUPP;
}
grf = ERR_PTR(-ENODEV);
if (np->parent)
grf = syscon_node_to_regmap(np->parent);
if (IS_ERR(grf))
grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
if (IS_ERR(grf)) {
pr_err("%s: Missing rockchip,grf property, %lu\n",
__func__, PTR_ERR(grf));
return PTR_ERR(grf);
}
ret = data->init_usb_uart(grf);
if (ret) {
pr_err("%s: could not init usb_uart, %d\n", __func__, ret);
enable_usb_uart = 0;
return ret;
}
return 0;
}
early_initcall(rockchip_init_usb_uart);
static int __init rockchip_usb_uart(char *buf)
{
enable_usb_uart = true;
return 0;
}
early_param("rockchip.usb_uart", rockchip_usb_uart);
#endif
MODULE_AUTHOR("Yunzhi Li <lyz@rock-chips.com>");
MODULE_DESCRIPTION("Rockchip USB 2.0 PHY driver");
MODULE_LICENSE("GPL v2");