linux-stable/include/linux/mhi.h
Hemant Kumar bc7ccce5a5 bus: mhi: core: Remove the system error worker thread
Remove the system error worker thread and instead have the
execution environment worker handle that transition to serialize
processing and avoid any possible race conditions during
shutdown.

Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200521170249.21795-10-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-22 09:35:43 +02:00

719 lines
22 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
*
*/
#ifndef _MHI_H_
#define _MHI_H_
#include <linux/device.h>
#include <linux/dma-direction.h>
#include <linux/mutex.h>
#include <linux/rwlock_types.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock_types.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
struct mhi_chan;
struct mhi_event;
struct mhi_ctxt;
struct mhi_cmd;
struct mhi_buf_info;
/**
* enum mhi_callback - MHI callback
* @MHI_CB_IDLE: MHI entered idle state
* @MHI_CB_PENDING_DATA: New data available for client to process
* @MHI_CB_LPM_ENTER: MHI host entered low power mode
* @MHI_CB_LPM_EXIT: MHI host about to exit low power mode
* @MHI_CB_EE_RDDM: MHI device entered RDDM exec env
* @MHI_CB_EE_MISSION_MODE: MHI device entered Mission Mode exec env
* @MHI_CB_SYS_ERROR: MHI device entered error state (may recover)
* @MHI_CB_FATAL_ERROR: MHI device entered fatal error state
* @MHI_CB_BW_REQ: Received a bandwidth switch request from device
*/
enum mhi_callback {
MHI_CB_IDLE,
MHI_CB_PENDING_DATA,
MHI_CB_LPM_ENTER,
MHI_CB_LPM_EXIT,
MHI_CB_EE_RDDM,
MHI_CB_EE_MISSION_MODE,
MHI_CB_SYS_ERROR,
MHI_CB_FATAL_ERROR,
MHI_CB_BW_REQ,
};
/**
* enum mhi_flags - Transfer flags
* @MHI_EOB: End of buffer for bulk transfer
* @MHI_EOT: End of transfer
* @MHI_CHAIN: Linked transfer
*/
enum mhi_flags {
MHI_EOB = BIT(0),
MHI_EOT = BIT(1),
MHI_CHAIN = BIT(2),
};
/**
* enum mhi_device_type - Device types
* @MHI_DEVICE_XFER: Handles data transfer
* @MHI_DEVICE_CONTROLLER: Control device
*/
enum mhi_device_type {
MHI_DEVICE_XFER,
MHI_DEVICE_CONTROLLER,
};
/**
* enum mhi_ch_type - Channel types
* @MHI_CH_TYPE_INVALID: Invalid channel type
* @MHI_CH_TYPE_OUTBOUND: Outbound channel to the device
* @MHI_CH_TYPE_INBOUND: Inbound channel from the device
* @MHI_CH_TYPE_INBOUND_COALESCED: Coalesced channel for the device to combine
* multiple packets and send them as a single
* large packet to reduce CPU consumption
*/
enum mhi_ch_type {
MHI_CH_TYPE_INVALID = 0,
MHI_CH_TYPE_OUTBOUND = DMA_TO_DEVICE,
MHI_CH_TYPE_INBOUND = DMA_FROM_DEVICE,
MHI_CH_TYPE_INBOUND_COALESCED = 3,
};
/**
* struct image_info - Firmware and RDDM table table
* @mhi_buf - Buffer for firmware and RDDM table
* @entries - # of entries in table
*/
struct image_info {
struct mhi_buf *mhi_buf;
struct bhi_vec_entry *bhi_vec;
u32 entries;
};
/**
* struct mhi_link_info - BW requirement
* target_link_speed - Link speed as defined by TLS bits in LinkControl reg
* target_link_width - Link width as defined by NLW bits in LinkStatus reg
*/
struct mhi_link_info {
unsigned int target_link_speed;
unsigned int target_link_width;
};
/**
* enum mhi_ee_type - Execution environment types
* @MHI_EE_PBL: Primary Bootloader
* @MHI_EE_SBL: Secondary Bootloader
* @MHI_EE_AMSS: Modem, aka the primary runtime EE
* @MHI_EE_RDDM: Ram dump download mode
* @MHI_EE_WFW: WLAN firmware mode
* @MHI_EE_PTHRU: Passthrough
* @MHI_EE_EDL: Embedded downloader
*/
enum mhi_ee_type {
MHI_EE_PBL,
MHI_EE_SBL,
MHI_EE_AMSS,
MHI_EE_RDDM,
MHI_EE_WFW,
MHI_EE_PTHRU,
MHI_EE_EDL,
MHI_EE_MAX_SUPPORTED = MHI_EE_EDL,
MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */
MHI_EE_NOT_SUPPORTED,
MHI_EE_MAX,
};
/**
* enum mhi_state - MHI states
* @MHI_STATE_RESET: Reset state
* @MHI_STATE_READY: Ready state
* @MHI_STATE_M0: M0 state
* @MHI_STATE_M1: M1 state
* @MHI_STATE_M2: M2 state
* @MHI_STATE_M3: M3 state
* @MHI_STATE_M3_FAST: M3 Fast state
* @MHI_STATE_BHI: BHI state
* @MHI_STATE_SYS_ERR: System Error state
*/
enum mhi_state {
MHI_STATE_RESET = 0x0,
MHI_STATE_READY = 0x1,
MHI_STATE_M0 = 0x2,
MHI_STATE_M1 = 0x3,
MHI_STATE_M2 = 0x4,
MHI_STATE_M3 = 0x5,
MHI_STATE_M3_FAST = 0x6,
MHI_STATE_BHI = 0x7,
MHI_STATE_SYS_ERR = 0xFF,
MHI_STATE_MAX,
};
/**
* enum mhi_ch_ee_mask - Execution environment mask for channel
* @MHI_CH_EE_PBL: Allow channel to be used in PBL EE
* @MHI_CH_EE_SBL: Allow channel to be used in SBL EE
* @MHI_CH_EE_AMSS: Allow channel to be used in AMSS EE
* @MHI_CH_EE_RDDM: Allow channel to be used in RDDM EE
* @MHI_CH_EE_PTHRU: Allow channel to be used in PTHRU EE
* @MHI_CH_EE_WFW: Allow channel to be used in WFW EE
* @MHI_CH_EE_EDL: Allow channel to be used in EDL EE
*/
enum mhi_ch_ee_mask {
MHI_CH_EE_PBL = BIT(MHI_EE_PBL),
MHI_CH_EE_SBL = BIT(MHI_EE_SBL),
MHI_CH_EE_AMSS = BIT(MHI_EE_AMSS),
MHI_CH_EE_RDDM = BIT(MHI_EE_RDDM),
MHI_CH_EE_PTHRU = BIT(MHI_EE_PTHRU),
MHI_CH_EE_WFW = BIT(MHI_EE_WFW),
MHI_CH_EE_EDL = BIT(MHI_EE_EDL),
};
/**
* enum mhi_er_data_type - Event ring data types
* @MHI_ER_DATA: Only client data over this ring
* @MHI_ER_CTRL: MHI control data and client data
*/
enum mhi_er_data_type {
MHI_ER_DATA,
MHI_ER_CTRL,
};
/**
* enum mhi_db_brst_mode - Doorbell mode
* @MHI_DB_BRST_DISABLE: Burst mode disable
* @MHI_DB_BRST_ENABLE: Burst mode enable
*/
enum mhi_db_brst_mode {
MHI_DB_BRST_DISABLE = 0x2,
MHI_DB_BRST_ENABLE = 0x3,
};
/**
* struct mhi_channel_config - Channel configuration structure for controller
* @name: The name of this channel
* @num: The number assigned to this channel
* @num_elements: The number of elements that can be queued to this channel
* @local_elements: The local ring length of the channel
* @event_ring: The event rung index that services this channel
* @dir: Direction that data may flow on this channel
* @type: Channel type
* @ee_mask: Execution Environment mask for this channel
* @pollcfg: Polling configuration for burst mode. 0 is default. milliseconds
for UL channels, multiple of 8 ring elements for DL channels
* @doorbell: Doorbell mode
* @lpm_notify: The channel master requires low power mode notifications
* @offload_channel: The client manages the channel completely
* @doorbell_mode_switch: Channel switches to doorbell mode on M0 transition
* @auto_queue: Framework will automatically queue buffers for DL traffic
* @auto_start: Automatically start (open) this channel
* @wake-capable: Channel capable of waking up the system
*/
struct mhi_channel_config {
char *name;
u32 num;
u32 num_elements;
u32 local_elements;
u32 event_ring;
enum dma_data_direction dir;
enum mhi_ch_type type;
u32 ee_mask;
u32 pollcfg;
enum mhi_db_brst_mode doorbell;
bool lpm_notify;
bool offload_channel;
bool doorbell_mode_switch;
bool auto_queue;
bool auto_start;
bool wake_capable;
};
/**
* struct mhi_event_config - Event ring configuration structure for controller
* @num_elements: The number of elements that can be queued to this ring
* @irq_moderation_ms: Delay irq for additional events to be aggregated
* @irq: IRQ associated with this ring
* @channel: Dedicated channel number. U32_MAX indicates a non-dedicated ring
* @priority: Priority of this ring. Use 1 for now
* @mode: Doorbell mode
* @data_type: Type of data this ring will process
* @hardware_event: This ring is associated with hardware channels
* @client_managed: This ring is client managed
* @offload_channel: This ring is associated with an offloaded channel
*/
struct mhi_event_config {
u32 num_elements;
u32 irq_moderation_ms;
u32 irq;
u32 channel;
u32 priority;
enum mhi_db_brst_mode mode;
enum mhi_er_data_type data_type;
bool hardware_event;
bool client_managed;
bool offload_channel;
};
/**
* struct mhi_controller_config - Root MHI controller configuration
* @max_channels: Maximum number of channels supported
* @timeout_ms: Timeout value for operations. 0 means use default
* @buf_len: Size of automatically allocated buffers. 0 means use default
* @num_channels: Number of channels defined in @ch_cfg
* @ch_cfg: Array of defined channels
* @num_events: Number of event rings defined in @event_cfg
* @event_cfg: Array of defined event rings
* @use_bounce_buf: Use a bounce buffer pool due to limited DDR access
* @m2_no_db: Host is not allowed to ring DB in M2 state
*/
struct mhi_controller_config {
u32 max_channels;
u32 timeout_ms;
u32 buf_len;
u32 num_channels;
struct mhi_channel_config *ch_cfg;
u32 num_events;
struct mhi_event_config *event_cfg;
bool use_bounce_buf;
bool m2_no_db;
};
/**
* struct mhi_controller - Master MHI controller structure
* @cntrl_dev: Pointer to the struct device of physical bus acting as the MHI
* controller (required)
* @mhi_dev: MHI device instance for the controller
* @regs: Base address of MHI MMIO register space (required)
* @bhi: Points to base of MHI BHI register space
* @bhie: Points to base of MHI BHIe register space
* @wake_db: MHI WAKE doorbell register address
* @iova_start: IOMMU starting address for data (required)
* @iova_stop: IOMMU stop address for data (required)
* @fw_image: Firmware image name for normal booting (required)
* @edl_image: Firmware image name for emergency download mode (optional)
* @rddm_size: RAM dump size that host should allocate for debugging purpose
* @sbl_size: SBL image size downloaded through BHIe (optional)
* @seg_len: BHIe vector size (optional)
* @fbc_image: Points to firmware image buffer
* @rddm_image: Points to RAM dump buffer
* @mhi_chan: Points to the channel configuration table
* @lpm_chans: List of channels that require LPM notifications
* @irq: base irq # to request (required)
* @max_chan: Maximum number of channels the controller supports
* @total_ev_rings: Total # of event rings allocated
* @hw_ev_rings: Number of hardware event rings
* @sw_ev_rings: Number of software event rings
* @nr_irqs_req: Number of IRQs required to operate (optional)
* @nr_irqs: Number of IRQ allocated by bus master (required)
* @family_number: MHI controller family number
* @device_number: MHI controller device number
* @major_version: MHI controller major revision number
* @minor_version: MHI controller minor revision number
* @mhi_event: MHI event ring configurations table
* @mhi_cmd: MHI command ring configurations table
* @mhi_ctxt: MHI device context, shared memory between host and device
* @pm_mutex: Mutex for suspend/resume operation
* @pm_lock: Lock for protecting MHI power management state
* @timeout_ms: Timeout in ms for state transitions
* @pm_state: MHI power management state
* @db_access: DB access states
* @ee: MHI device execution environment
* @dev_state: MHI device state
* @dev_wake: Device wakeup count
* @pending_pkts: Pending packets for the controller
* @transition_list: List of MHI state transitions
* @transition_lock: Lock for protecting MHI state transition list
* @wlock: Lock for protecting device wakeup
* @mhi_link_info: Device bandwidth info
* @st_worker: State transition worker
* @state_event: State change event
* @status_cb: CB function to notify power states of the device (required)
* @wake_get: CB function to assert device wake (optional)
* @wake_put: CB function to de-assert device wake (optional)
* @wake_toggle: CB function to assert and de-assert device wake (optional)
* @runtime_get: CB function to controller runtime resume (required)
* @runtime_put: CB function to decrement pm usage (required)
* @map_single: CB function to create TRE buffer
* @unmap_single: CB function to destroy TRE buffer
* @read_reg: Read a MHI register via the physical link (required)
* @write_reg: Write a MHI register via the physical link (required)
* @buffer_len: Bounce buffer length
* @bounce_buf: Use of bounce buffer
* @fbc_download: MHI host needs to do complete image transfer (optional)
* @pre_init: MHI host needs to do pre-initialization before power up
* @wake_set: Device wakeup set flag
*
* Fields marked as (required) need to be populated by the controller driver
* before calling mhi_register_controller(). For the fields marked as (optional)
* they can be populated depending on the usecase.
*
* The following fields are present for the purpose of implementing any device
* specific quirks or customizations for specific MHI revisions used in device
* by the controller drivers. The MHI stack will just populate these fields
* during mhi_register_controller():
* family_number
* device_number
* major_version
* minor_version
*/
struct mhi_controller {
struct device *cntrl_dev;
struct mhi_device *mhi_dev;
void __iomem *regs;
void __iomem *bhi;
void __iomem *bhie;
void __iomem *wake_db;
dma_addr_t iova_start;
dma_addr_t iova_stop;
const char *fw_image;
const char *edl_image;
size_t rddm_size;
size_t sbl_size;
size_t seg_len;
struct image_info *fbc_image;
struct image_info *rddm_image;
struct mhi_chan *mhi_chan;
struct list_head lpm_chans;
int *irq;
u32 max_chan;
u32 total_ev_rings;
u32 hw_ev_rings;
u32 sw_ev_rings;
u32 nr_irqs_req;
u32 nr_irqs;
u32 family_number;
u32 device_number;
u32 major_version;
u32 minor_version;
struct mhi_event *mhi_event;
struct mhi_cmd *mhi_cmd;
struct mhi_ctxt *mhi_ctxt;
struct mutex pm_mutex;
rwlock_t pm_lock;
u32 timeout_ms;
u32 pm_state;
u32 db_access;
enum mhi_ee_type ee;
enum mhi_state dev_state;
atomic_t dev_wake;
atomic_t pending_pkts;
struct list_head transition_list;
spinlock_t transition_lock;
spinlock_t wlock;
struct mhi_link_info mhi_link_info;
struct work_struct st_worker;
wait_queue_head_t state_event;
void (*status_cb)(struct mhi_controller *mhi_cntrl,
enum mhi_callback cb);
void (*wake_get)(struct mhi_controller *mhi_cntrl, bool override);
void (*wake_put)(struct mhi_controller *mhi_cntrl, bool override);
void (*wake_toggle)(struct mhi_controller *mhi_cntrl);
int (*runtime_get)(struct mhi_controller *mhi_cntrl);
void (*runtime_put)(struct mhi_controller *mhi_cntrl);
int (*map_single)(struct mhi_controller *mhi_cntrl,
struct mhi_buf_info *buf);
void (*unmap_single)(struct mhi_controller *mhi_cntrl,
struct mhi_buf_info *buf);
int (*read_reg)(struct mhi_controller *mhi_cntrl, void __iomem *addr,
u32 *out);
void (*write_reg)(struct mhi_controller *mhi_cntrl, void __iomem *addr,
u32 val);
size_t buffer_len;
bool bounce_buf;
bool fbc_download;
bool pre_init;
bool wake_set;
};
/**
* struct mhi_device - Structure representing a MHI device which binds
* to channels
* @id: Pointer to MHI device ID struct
* @chan_name: Name of the channel to which the device binds
* @mhi_cntrl: Controller the device belongs to
* @ul_chan: UL channel for the device
* @dl_chan: DL channel for the device
* @dev: Driver model device node for the MHI device
* @dev_type: MHI device type
* @ul_chan_id: MHI channel id for UL transfer
* @dl_chan_id: MHI channel id for DL transfer
* @dev_wake: Device wakeup counter
*/
struct mhi_device {
const struct mhi_device_id *id;
const char *chan_name;
struct mhi_controller *mhi_cntrl;
struct mhi_chan *ul_chan;
struct mhi_chan *dl_chan;
struct device dev;
enum mhi_device_type dev_type;
int ul_chan_id;
int dl_chan_id;
u32 dev_wake;
};
/**
* struct mhi_result - Completed buffer information
* @buf_addr: Address of data buffer
* @bytes_xferd: # of bytes transferred
* @dir: Channel direction
* @transaction_status: Status of last transaction
*/
struct mhi_result {
void *buf_addr;
size_t bytes_xferd;
enum dma_data_direction dir;
int transaction_status;
};
/**
* struct mhi_buf - MHI Buffer description
* @buf: Virtual address of the buffer
* @name: Buffer label. For offload channel, configurations name must be:
* ECA - Event context array data
* CCA - Channel context array data
* @dma_addr: IOMMU address of the buffer
* @len: # of bytes
*/
struct mhi_buf {
void *buf;
const char *name;
dma_addr_t dma_addr;
size_t len;
};
/**
* struct mhi_driver - Structure representing a MHI client driver
* @probe: CB function for client driver probe function
* @remove: CB function for client driver remove function
* @ul_xfer_cb: CB function for UL data transfer
* @dl_xfer_cb: CB function for DL data transfer
* @status_cb: CB functions for asynchronous status
* @driver: Device driver model driver
*/
struct mhi_driver {
const struct mhi_device_id *id_table;
int (*probe)(struct mhi_device *mhi_dev,
const struct mhi_device_id *id);
void (*remove)(struct mhi_device *mhi_dev);
void (*ul_xfer_cb)(struct mhi_device *mhi_dev,
struct mhi_result *result);
void (*dl_xfer_cb)(struct mhi_device *mhi_dev,
struct mhi_result *result);
void (*status_cb)(struct mhi_device *mhi_dev, enum mhi_callback mhi_cb);
struct device_driver driver;
};
#define to_mhi_driver(drv) container_of(drv, struct mhi_driver, driver)
#define to_mhi_device(dev) container_of(dev, struct mhi_device, dev)
/**
* mhi_register_controller - Register MHI controller
* @mhi_cntrl: MHI controller to register
* @config: Configuration to use for the controller
*/
int mhi_register_controller(struct mhi_controller *mhi_cntrl,
struct mhi_controller_config *config);
/**
* mhi_unregister_controller - Unregister MHI controller
* @mhi_cntrl: MHI controller to unregister
*/
void mhi_unregister_controller(struct mhi_controller *mhi_cntrl);
/*
* module_mhi_driver() - Helper macro for drivers that don't do
* anything special other than using default mhi_driver_register() and
* mhi_driver_unregister(). This eliminates a lot of boilerplate.
* Each module may only use this macro once.
*/
#define module_mhi_driver(mhi_drv) \
module_driver(mhi_drv, mhi_driver_register, \
mhi_driver_unregister)
/*
* Macro to avoid include chaining to get THIS_MODULE
*/
#define mhi_driver_register(mhi_drv) \
__mhi_driver_register(mhi_drv, THIS_MODULE)
/**
* __mhi_driver_register - Register driver with MHI framework
* @mhi_drv: Driver associated with the device
* @owner: The module owner
*/
int __mhi_driver_register(struct mhi_driver *mhi_drv, struct module *owner);
/**
* mhi_driver_unregister - Unregister a driver for mhi_devices
* @mhi_drv: Driver associated with the device
*/
void mhi_driver_unregister(struct mhi_driver *mhi_drv);
/**
* mhi_set_mhi_state - Set MHI device state
* @mhi_cntrl: MHI controller
* @state: State to set
*/
void mhi_set_mhi_state(struct mhi_controller *mhi_cntrl,
enum mhi_state state);
/**
* mhi_notify - Notify the MHI client driver about client device status
* @mhi_dev: MHI device instance
* @cb_reason: MHI callback reason
*/
void mhi_notify(struct mhi_device *mhi_dev, enum mhi_callback cb_reason);
/**
* mhi_prepare_for_power_up - Do pre-initialization before power up.
* This is optional, call this before power up if
* the controller does not want bus framework to
* automatically free any allocated memory during
* shutdown process.
* @mhi_cntrl: MHI controller
*/
int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl);
/**
* mhi_async_power_up - Start MHI power up sequence
* @mhi_cntrl: MHI controller
*/
int mhi_async_power_up(struct mhi_controller *mhi_cntrl);
/**
* mhi_sync_power_up - Start MHI power up sequence and wait till the device
* device enters valid EE state
* @mhi_cntrl: MHI controller
*/
int mhi_sync_power_up(struct mhi_controller *mhi_cntrl);
/**
* mhi_power_down - Start MHI power down sequence
* @mhi_cntrl: MHI controller
* @graceful: Link is still accessible, so do a graceful shutdown process
*/
void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful);
/**
* mhi_unprepare_after_power_down - Free any allocated memory after power down
* @mhi_cntrl: MHI controller
*/
void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl);
/**
* mhi_pm_suspend - Move MHI into a suspended state
* @mhi_cntrl: MHI controller
*/
int mhi_pm_suspend(struct mhi_controller *mhi_cntrl);
/**
* mhi_pm_resume - Resume MHI from suspended state
* @mhi_cntrl: MHI controller
*/
int mhi_pm_resume(struct mhi_controller *mhi_cntrl);
/**
* mhi_download_rddm_img - Download ramdump image from device for
* debugging purpose.
* @mhi_cntrl: MHI controller
* @in_panic: Download rddm image during kernel panic
*/
int mhi_download_rddm_img(struct mhi_controller *mhi_cntrl, bool in_panic);
/**
* mhi_force_rddm_mode - Force device into rddm mode
* @mhi_cntrl: MHI controller
*/
int mhi_force_rddm_mode(struct mhi_controller *mhi_cntrl);
/**
* mhi_get_mhi_state - Get MHI state of the device
* @mhi_cntrl: MHI controller
*/
enum mhi_state mhi_get_mhi_state(struct mhi_controller *mhi_cntrl);
/**
* mhi_device_get - Disable device low power mode
* @mhi_dev: Device associated with the channel
*/
void mhi_device_get(struct mhi_device *mhi_dev);
/**
* mhi_device_get_sync - Disable device low power mode. Synchronously
* take the controller out of suspended state
* @mhi_dev: Device associated with the channel
*/
int mhi_device_get_sync(struct mhi_device *mhi_dev);
/**
* mhi_device_put - Re-enable device low power mode
* @mhi_dev: Device associated with the channel
*/
void mhi_device_put(struct mhi_device *mhi_dev);
/**
* mhi_prepare_for_transfer - Setup channel for data transfer
* @mhi_dev: Device associated with the channels
*/
int mhi_prepare_for_transfer(struct mhi_device *mhi_dev);
/**
* mhi_unprepare_from_transfer - Unprepare the channels
* @mhi_dev: Device associated with the channels
*/
void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev);
/**
* mhi_poll - Poll for any available data in DL direction
* @mhi_dev: Device associated with the channels
* @budget: # of events to process
*/
int mhi_poll(struct mhi_device *mhi_dev, u32 budget);
/**
* mhi_queue_dma - Send or receive DMA mapped buffers from client device
* over MHI channel
* @mhi_dev: Device associated with the channels
* @dir: DMA direction for the channel
* @mhi_buf: Buffer for holding the DMA mapped data
* @len: Buffer length
* @mflags: MHI transfer flags used for the transfer
*/
int mhi_queue_dma(struct mhi_device *mhi_dev, enum dma_data_direction dir,
struct mhi_buf *mhi_buf, size_t len, enum mhi_flags mflags);
/**
* mhi_queue_buf - Send or receive raw buffers from client device over MHI
* channel
* @mhi_dev: Device associated with the channels
* @dir: DMA direction for the channel
* @buf: Buffer for holding the data
* @len: Buffer length
* @mflags: MHI transfer flags used for the transfer
*/
int mhi_queue_buf(struct mhi_device *mhi_dev, enum dma_data_direction dir,
void *buf, size_t len, enum mhi_flags mflags);
/**
* mhi_queue_skb - Send or receive SKBs from client device over MHI channel
* @mhi_dev: Device associated with the channels
* @dir: DMA direction for the channel
* @skb: Buffer for holding SKBs
* @len: Buffer length
* @mflags: MHI transfer flags used for the transfer
*/
int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir,
struct sk_buff *skb, size_t len, enum mhi_flags mflags);
#endif /* _MHI_H_ */