linux-stable/drivers/clk/qcom/gdsc.c
Stephen Boyd 77122d6f74 Merge branch 'clk-qcom-sdm845' into clk-next
* clk-qcom-sdm845:
  clk: qcom: Export clk_fabia_pll_configure()
  clk: qcom: Add video clock controller driver for SDM845
  dt-bindings: clock: Introduce QCOM Video clock bindings
  clk: qcom: Add Global Clock controller (GCC) driver for SDM845
  clk: qcom: Add DT bindings for SDM845 gcc clock controller
  clk: qcom: Configure the RCGs to a safe source as needed
  clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks
  clk: qcom: Simplify gdsc status checking logic
  clk: qcom: gdsc: Add support to poll CFG register to check GDSC state
  clk: qcom: gdsc: Add support to poll for higher timeout value
  clk: qcom: gdsc: Add support to reset AON and block reset logic
  clk: qcom: Add support for controlling Fabia PLL
  clk: qcom: Clear hardware clock control bit of RCG

Also fixup the Kconfig mess where SDM845 GCC has msm8998 in the
description and also the video Kconfig says things slightly differently
from the GCC one so just make it the same.
2018-06-04 12:34:51 -07:00

416 lines
9.6 KiB
C

/*
* Copyright (c) 2015, 2017-2018, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/ktime.h>
#include <linux/pm_domain.h>
#include <linux/regmap.h>
#include <linux/reset-controller.h>
#include <linux/slab.h>
#include "gdsc.h"
#define PWR_ON_MASK BIT(31)
#define EN_REST_WAIT_MASK GENMASK_ULL(23, 20)
#define EN_FEW_WAIT_MASK GENMASK_ULL(19, 16)
#define CLK_DIS_WAIT_MASK GENMASK_ULL(15, 12)
#define SW_OVERRIDE_MASK BIT(2)
#define HW_CONTROL_MASK BIT(1)
#define SW_COLLAPSE_MASK BIT(0)
#define GMEM_CLAMP_IO_MASK BIT(0)
#define GMEM_RESET_MASK BIT(4)
/* CFG_GDSCR */
#define GDSC_POWER_UP_COMPLETE BIT(16)
#define GDSC_POWER_DOWN_COMPLETE BIT(15)
#define CFG_GDSCR_OFFSET 0x4
/* Wait 2^n CXO cycles between all states. Here, n=2 (4 cycles). */
#define EN_REST_WAIT_VAL (0x2 << 20)
#define EN_FEW_WAIT_VAL (0x8 << 16)
#define CLK_DIS_WAIT_VAL (0x2 << 12)
#define RETAIN_MEM BIT(14)
#define RETAIN_PERIPH BIT(13)
#define TIMEOUT_US 500
#define domain_to_gdsc(domain) container_of(domain, struct gdsc, pd)
enum gdsc_status {
GDSC_OFF,
GDSC_ON
};
/* Returns 1 if GDSC status is status, 0 if not, and < 0 on error */
static int gdsc_check_status(struct gdsc *sc, enum gdsc_status status)
{
unsigned int reg;
u32 val;
int ret;
if (sc->flags & POLL_CFG_GDSCR)
reg = sc->gdscr + CFG_GDSCR_OFFSET;
else if (sc->gds_hw_ctrl)
reg = sc->gds_hw_ctrl;
else
reg = sc->gdscr;
ret = regmap_read(sc->regmap, reg, &val);
if (ret)
return ret;
if (sc->flags & POLL_CFG_GDSCR) {
switch (status) {
case GDSC_ON:
return !!(val & GDSC_POWER_UP_COMPLETE);
case GDSC_OFF:
return !!(val & GDSC_POWER_DOWN_COMPLETE);
}
}
switch (status) {
case GDSC_ON:
return !!(val & PWR_ON_MASK);
case GDSC_OFF:
return !(val & PWR_ON_MASK);
}
return -EINVAL;
}
static int gdsc_hwctrl(struct gdsc *sc, bool en)
{
u32 val = en ? HW_CONTROL_MASK : 0;
return regmap_update_bits(sc->regmap, sc->gdscr, HW_CONTROL_MASK, val);
}
static int gdsc_poll_status(struct gdsc *sc, enum gdsc_status status)
{
ktime_t start;
start = ktime_get();
do {
if (gdsc_check_status(sc, status))
return 0;
} while (ktime_us_delta(ktime_get(), start) < TIMEOUT_US);
if (gdsc_check_status(sc, status))
return 0;
return -ETIMEDOUT;
}
static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status)
{
int ret;
u32 val = (status == GDSC_ON) ? 0 : SW_COLLAPSE_MASK;
ret = regmap_update_bits(sc->regmap, sc->gdscr, SW_COLLAPSE_MASK, val);
if (ret)
return ret;
/* If disabling votable gdscs, don't poll on status */
if ((sc->flags & VOTABLE) && status == GDSC_OFF) {
/*
* Add a short delay here to ensure that an enable
* right after it was disabled does not put it in an
* unknown state
*/
udelay(TIMEOUT_US);
return 0;
}
if (sc->gds_hw_ctrl) {
/*
* The gds hw controller asserts/de-asserts the status bit soon
* after it receives a power on/off request from a master.
* The controller then takes around 8 xo cycles to start its
* internal state machine and update the status bit. During
* this time, the status bit does not reflect the true status
* of the core.
* Add a delay of 1 us between writing to the SW_COLLAPSE bit
* and polling the status bit.
*/
udelay(1);
}
return gdsc_poll_status(sc, status);
}
static inline int gdsc_deassert_reset(struct gdsc *sc)
{
int i;
for (i = 0; i < sc->reset_count; i++)
sc->rcdev->ops->deassert(sc->rcdev, sc->resets[i]);
return 0;
}
static inline int gdsc_assert_reset(struct gdsc *sc)
{
int i;
for (i = 0; i < sc->reset_count; i++)
sc->rcdev->ops->assert(sc->rcdev, sc->resets[i]);
return 0;
}
static inline void gdsc_force_mem_on(struct gdsc *sc)
{
int i;
u32 mask = RETAIN_MEM | RETAIN_PERIPH;
for (i = 0; i < sc->cxc_count; i++)
regmap_update_bits(sc->regmap, sc->cxcs[i], mask, mask);
}
static inline void gdsc_clear_mem_on(struct gdsc *sc)
{
int i;
u32 mask = RETAIN_MEM | RETAIN_PERIPH;
for (i = 0; i < sc->cxc_count; i++)
regmap_update_bits(sc->regmap, sc->cxcs[i], mask, 0);
}
static inline void gdsc_deassert_clamp_io(struct gdsc *sc)
{
regmap_update_bits(sc->regmap, sc->clamp_io_ctrl,
GMEM_CLAMP_IO_MASK, 0);
}
static inline void gdsc_assert_clamp_io(struct gdsc *sc)
{
regmap_update_bits(sc->regmap, sc->clamp_io_ctrl,
GMEM_CLAMP_IO_MASK, 1);
}
static inline void gdsc_assert_reset_aon(struct gdsc *sc)
{
regmap_update_bits(sc->regmap, sc->clamp_io_ctrl,
GMEM_RESET_MASK, 1);
udelay(1);
regmap_update_bits(sc->regmap, sc->clamp_io_ctrl,
GMEM_RESET_MASK, 0);
}
static int gdsc_enable(struct generic_pm_domain *domain)
{
struct gdsc *sc = domain_to_gdsc(domain);
int ret;
if (sc->pwrsts == PWRSTS_ON)
return gdsc_deassert_reset(sc);
if (sc->flags & SW_RESET) {
gdsc_assert_reset(sc);
udelay(1);
gdsc_deassert_reset(sc);
}
if (sc->flags & CLAMP_IO) {
if (sc->flags & AON_RESET)
gdsc_assert_reset_aon(sc);
gdsc_deassert_clamp_io(sc);
}
ret = gdsc_toggle_logic(sc, GDSC_ON);
if (ret)
return ret;
if (sc->pwrsts & PWRSTS_OFF)
gdsc_force_mem_on(sc);
/*
* If clocks to this power domain were already on, they will take an
* additional 4 clock cycles to re-enable after the power domain is
* enabled. Delay to account for this. A delay is also needed to ensure
* clocks are not enabled within 400ns of enabling power to the
* memories.
*/
udelay(1);
/* Turn on HW trigger mode if supported */
if (sc->flags & HW_CTRL) {
ret = gdsc_hwctrl(sc, true);
if (ret)
return ret;
/*
* Wait for the GDSC to go through a power down and
* up cycle. In case a firmware ends up polling status
* bits for the gdsc, it might read an 'on' status before
* the GDSC can finish the power cycle.
* We wait 1us before returning to ensure the firmware
* can't immediately poll the status bits.
*/
udelay(1);
}
return 0;
}
static int gdsc_disable(struct generic_pm_domain *domain)
{
struct gdsc *sc = domain_to_gdsc(domain);
int ret;
if (sc->pwrsts == PWRSTS_ON)
return gdsc_assert_reset(sc);
/* Turn off HW trigger mode if supported */
if (sc->flags & HW_CTRL) {
ret = gdsc_hwctrl(sc, false);
if (ret < 0)
return ret;
/*
* Wait for the GDSC to go through a power down and
* up cycle. In case we end up polling status
* bits for the gdsc before the power cycle is completed
* it might read an 'on' status wrongly.
*/
udelay(1);
ret = gdsc_poll_status(sc, GDSC_ON);
if (ret)
return ret;
}
if (sc->pwrsts & PWRSTS_OFF)
gdsc_clear_mem_on(sc);
ret = gdsc_toggle_logic(sc, GDSC_OFF);
if (ret)
return ret;
if (sc->flags & CLAMP_IO)
gdsc_assert_clamp_io(sc);
return 0;
}
static int gdsc_init(struct gdsc *sc)
{
u32 mask, val;
int on, ret;
/*
* Disable HW trigger: collapse/restore occur based on registers writes.
* Disable SW override: Use hardware state-machine for sequencing.
* Configure wait time between states.
*/
mask = HW_CONTROL_MASK | SW_OVERRIDE_MASK |
EN_REST_WAIT_MASK | EN_FEW_WAIT_MASK | CLK_DIS_WAIT_MASK;
val = EN_REST_WAIT_VAL | EN_FEW_WAIT_VAL | CLK_DIS_WAIT_VAL;
ret = regmap_update_bits(sc->regmap, sc->gdscr, mask, val);
if (ret)
return ret;
/* Force gdsc ON if only ON state is supported */
if (sc->pwrsts == PWRSTS_ON) {
ret = gdsc_toggle_logic(sc, GDSC_ON);
if (ret)
return ret;
}
on = gdsc_check_status(sc, GDSC_ON);
if (on < 0)
return on;
/*
* Votable GDSCs can be ON due to Vote from other masters.
* If a Votable GDSC is ON, make sure we have a Vote.
*/
if ((sc->flags & VOTABLE) && on)
gdsc_enable(&sc->pd);
/* If ALWAYS_ON GDSCs are not ON, turn them ON */
if (sc->flags & ALWAYS_ON) {
if (!on)
gdsc_enable(&sc->pd);
on = true;
sc->pd.flags |= GENPD_FLAG_ALWAYS_ON;
}
if (on || (sc->pwrsts & PWRSTS_RET))
gdsc_force_mem_on(sc);
else
gdsc_clear_mem_on(sc);
sc->pd.power_off = gdsc_disable;
sc->pd.power_on = gdsc_enable;
pm_genpd_init(&sc->pd, NULL, !on);
return 0;
}
int gdsc_register(struct gdsc_desc *desc,
struct reset_controller_dev *rcdev, struct regmap *regmap)
{
int i, ret;
struct genpd_onecell_data *data;
struct device *dev = desc->dev;
struct gdsc **scs = desc->scs;
size_t num = desc->num;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->domains = devm_kcalloc(dev, num, sizeof(*data->domains),
GFP_KERNEL);
if (!data->domains)
return -ENOMEM;
data->num_domains = num;
for (i = 0; i < num; i++) {
if (!scs[i])
continue;
scs[i]->regmap = regmap;
scs[i]->rcdev = rcdev;
ret = gdsc_init(scs[i]);
if (ret)
return ret;
data->domains[i] = &scs[i]->pd;
}
/* Add subdomains */
for (i = 0; i < num; i++) {
if (!scs[i])
continue;
if (scs[i]->parent)
pm_genpd_add_subdomain(scs[i]->parent, &scs[i]->pd);
}
return of_genpd_add_provider_onecell(dev->of_node, data);
}
void gdsc_unregister(struct gdsc_desc *desc)
{
int i;
struct device *dev = desc->dev;
struct gdsc **scs = desc->scs;
size_t num = desc->num;
/* Remove subdomains */
for (i = 0; i < num; i++) {
if (!scs[i])
continue;
if (scs[i]->parent)
pm_genpd_remove_subdomain(scs[i]->parent, &scs[i]->pd);
}
of_genpd_del_provider(dev->of_node);
}