mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Linus Torvalds](/assets/img/avatar_default.png)
- RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs - New Device Support - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci - New Functionality - Amend API to provide register layout; atmel-smc - Fix-ups - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb - Bug Fixes - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZsP0YAAoJEFGvii+H/HdhrJUP/RB6BTCDMf3WCi5e6PN8IFST JspCcf4bwKVc5lDvORQglVRfBhKY/uSr7F9xlfXtHx8V60ZNo1VOQcyJBTKIz+IJ +FQQgM3lEMKIn3QCcu9lKSRomJx55YDnF5SrZ8FzkC8pGLrCYEru5HfqFqOTfPqq OH2wZSqiX4H/jYdfVzp3bgqXkDff/nSEGTeFankFkv4wRvLGRxlpVuqkRJcvEJA3 d8N9MoBBxkZAtAn2j1H5cHyPx5NrBEM2gkXpDfdd+kJNnFzjL72xsXd6rp+N6rcm d20eL+1fyJVyvGhGiDOhFwqRAZEqvjPSI4k5kQdRk8IdioGgbmaI74eUbv+rGAKp P9QdR7n1ctYyVgwnawIwKTPMzdZo5+9kdagCtu8IBVT02zQqVSDKZM7dAYo2rJuF yw24jONcwHFrKA25n1pLJmMbJGHq83kqqw3q5kl17nyArvOOcyspCTODIL9iskhZ L0IoIMwQYEj/pnI+iuXl9bJ30v2FIJxyCzUR2u7OJnrH7G27rsoOL0WDqxbp3Dp9 7tD+6OzMiyIEDxtcd74kjg7g9p5HCmcY3FiDWirmQuZIR3abSET4ap+cTYPdFqVZ widS5Pi4PP40ZFN6+4lbBHLlh6MgpHpig9M03kFAr1SyZnH8nf4TnCsFV+wYPyTb LR3cKpFeTY8IyFWaLoSg =TKIm -----END PGP SIGNATURE----- Merge tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
839 lines
22 KiB
C
839 lines
22 KiB
C
/*
|
|
* twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller
|
|
*
|
|
* Copyright (C) 2004-2007 Texas Instruments
|
|
* Copyright (C) 2008 Nokia Corporation
|
|
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Current status:
|
|
* - HS USB ULPI mode works.
|
|
* - 3-pin mode support may be added in future.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/usb/musb.h>
|
|
#include <linux/usb/ulpi.h>
|
|
#include <linux/mfd/twl.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Register defines */
|
|
|
|
#define MCPC_CTRL 0x30
|
|
#define MCPC_CTRL_RTSOL (1 << 7)
|
|
#define MCPC_CTRL_EXTSWR (1 << 6)
|
|
#define MCPC_CTRL_EXTSWC (1 << 5)
|
|
#define MCPC_CTRL_VOICESW (1 << 4)
|
|
#define MCPC_CTRL_OUT64K (1 << 3)
|
|
#define MCPC_CTRL_RTSCTSSW (1 << 2)
|
|
#define MCPC_CTRL_HS_UART (1 << 0)
|
|
|
|
#define MCPC_IO_CTRL 0x33
|
|
#define MCPC_IO_CTRL_MICBIASEN (1 << 5)
|
|
#define MCPC_IO_CTRL_CTS_NPU (1 << 4)
|
|
#define MCPC_IO_CTRL_RXD_PU (1 << 3)
|
|
#define MCPC_IO_CTRL_TXDTYP (1 << 2)
|
|
#define MCPC_IO_CTRL_CTSTYP (1 << 1)
|
|
#define MCPC_IO_CTRL_RTSTYP (1 << 0)
|
|
|
|
#define MCPC_CTRL2 0x36
|
|
#define MCPC_CTRL2_MCPC_CK_EN (1 << 0)
|
|
|
|
#define OTHER_FUNC_CTRL 0x80
|
|
#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4)
|
|
#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2)
|
|
|
|
#define OTHER_IFC_CTRL 0x83
|
|
#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6)
|
|
#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5)
|
|
#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4)
|
|
#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3)
|
|
#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2)
|
|
#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0)
|
|
|
|
#define OTHER_INT_EN_RISE 0x86
|
|
#define OTHER_INT_EN_FALL 0x89
|
|
#define OTHER_INT_STS 0x8C
|
|
#define OTHER_INT_LATCH 0x8D
|
|
#define OTHER_INT_VB_SESS_VLD (1 << 7)
|
|
#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */
|
|
#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */
|
|
#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */
|
|
#define OTHER_INT_MANU (1 << 1)
|
|
#define OTHER_INT_ABNORMAL_STRESS (1 << 0)
|
|
|
|
#define ID_STATUS 0x96
|
|
#define ID_RES_FLOAT (1 << 4)
|
|
#define ID_RES_440K (1 << 3)
|
|
#define ID_RES_200K (1 << 2)
|
|
#define ID_RES_102K (1 << 1)
|
|
#define ID_RES_GND (1 << 0)
|
|
|
|
#define POWER_CTRL 0xAC
|
|
#define POWER_CTRL_OTG_ENAB (1 << 5)
|
|
|
|
#define OTHER_IFC_CTRL2 0xAF
|
|
#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4)
|
|
#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3)
|
|
#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2)
|
|
#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */
|
|
#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0)
|
|
#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0)
|
|
|
|
#define REG_CTRL_EN 0xB2
|
|
#define REG_CTRL_ERROR 0xB5
|
|
#define ULPI_I2C_CONFLICT_INTEN (1 << 0)
|
|
|
|
#define OTHER_FUNC_CTRL2 0xB8
|
|
#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0)
|
|
|
|
/* following registers do not have separate _clr and _set registers */
|
|
#define VBUS_DEBOUNCE 0xC0
|
|
#define ID_DEBOUNCE 0xC1
|
|
#define VBAT_TIMER 0xD3
|
|
#define PHY_PWR_CTRL 0xFD
|
|
#define PHY_PWR_PHYPWD (1 << 0)
|
|
#define PHY_CLK_CTRL 0xFE
|
|
#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2)
|
|
#define PHY_CLK_CTRL_CLK32K_EN (1 << 1)
|
|
#define REQ_PHY_DPLL_CLK (1 << 0)
|
|
#define PHY_CLK_CTRL_STS 0xFF
|
|
#define PHY_DPLL_CLK (1 << 0)
|
|
|
|
/* In module TWL_MODULE_PM_MASTER */
|
|
#define STS_HW_CONDITIONS 0x0F
|
|
|
|
/* In module TWL_MODULE_PM_RECEIVER */
|
|
#define VUSB_DEDICATED1 0x7D
|
|
#define VUSB_DEDICATED2 0x7E
|
|
#define VUSB1V5_DEV_GRP 0x71
|
|
#define VUSB1V5_TYPE 0x72
|
|
#define VUSB1V5_REMAP 0x73
|
|
#define VUSB1V8_DEV_GRP 0x74
|
|
#define VUSB1V8_TYPE 0x75
|
|
#define VUSB1V8_REMAP 0x76
|
|
#define VUSB3V1_DEV_GRP 0x77
|
|
#define VUSB3V1_TYPE 0x78
|
|
#define VUSB3V1_REMAP 0x79
|
|
|
|
/* In module TWL4030_MODULE_INTBR */
|
|
#define PMBR1 0x0D
|
|
#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
|
|
|
|
/*
|
|
* If VBUS is valid or ID is ground, then we know a
|
|
* cable is present and we need to be runtime-enabled
|
|
*/
|
|
static inline bool cable_present(enum musb_vbus_id_status stat)
|
|
{
|
|
return stat == MUSB_VBUS_VALID ||
|
|
stat == MUSB_ID_GROUND;
|
|
}
|
|
|
|
struct twl4030_usb {
|
|
struct usb_phy phy;
|
|
struct device *dev;
|
|
|
|
/* TWL4030 internal USB regulator supplies */
|
|
struct regulator *usb1v5;
|
|
struct regulator *usb1v8;
|
|
struct regulator *usb3v1;
|
|
|
|
/* for vbus reporting with irqs disabled */
|
|
struct mutex lock;
|
|
|
|
/* pin configuration */
|
|
enum twl4030_usb_mode usb_mode;
|
|
|
|
int irq;
|
|
enum musb_vbus_id_status linkstat;
|
|
bool vbus_supplied;
|
|
bool musb_mailbox_pending;
|
|
|
|
struct delayed_work id_workaround_work;
|
|
};
|
|
|
|
/* internal define on top of container_of */
|
|
#define phy_to_twl(x) container_of((x), struct twl4030_usb, phy)
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
|
|
u8 module, u8 data, u8 address)
|
|
{
|
|
u8 check = 0xFF;
|
|
|
|
if ((twl_i2c_write_u8(module, data, address) >= 0) &&
|
|
(twl_i2c_read_u8(module, &check, address) >= 0) &&
|
|
(check == data))
|
|
return 0;
|
|
dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
|
|
1, module, address, check, data);
|
|
|
|
/* Failed once: Try again */
|
|
if ((twl_i2c_write_u8(module, data, address) >= 0) &&
|
|
(twl_i2c_read_u8(module, &check, address) >= 0) &&
|
|
(check == data))
|
|
return 0;
|
|
dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
|
|
2, module, address, check, data);
|
|
|
|
/* Failed again: Return error */
|
|
return -EBUSY;
|
|
}
|
|
|
|
#define twl4030_usb_write_verify(twl, address, data) \
|
|
twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address))
|
|
|
|
static inline int twl4030_usb_write(struct twl4030_usb *twl,
|
|
u8 address, u8 data)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address);
|
|
if (ret < 0)
|
|
dev_dbg(twl->dev,
|
|
"TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
|
|
return ret;
|
|
}
|
|
|
|
static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address)
|
|
{
|
|
u8 data;
|
|
int ret = 0;
|
|
|
|
ret = twl_i2c_read_u8(module, &data, address);
|
|
if (ret >= 0)
|
|
ret = data;
|
|
else
|
|
dev_dbg(twl->dev,
|
|
"TWL4030:readb[0x%x,0x%x] Error %d\n",
|
|
module, address, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
|
|
{
|
|
return twl4030_readb(twl, TWL_MODULE_USB, address);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static inline int
|
|
twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
|
|
{
|
|
return twl4030_usb_write(twl, ULPI_SET(reg), bits);
|
|
}
|
|
|
|
static inline int
|
|
twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
|
|
{
|
|
return twl4030_usb_write(twl, ULPI_CLR(reg), bits);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static bool twl4030_is_driving_vbus(struct twl4030_usb *twl)
|
|
{
|
|
int ret;
|
|
|
|
ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS);
|
|
if (ret < 0 || !(ret & PHY_DPLL_CLK))
|
|
/*
|
|
* if clocks are off, registers are not updated,
|
|
* but we can assume we don't drive VBUS in this case
|
|
*/
|
|
return false;
|
|
|
|
ret = twl4030_usb_read(twl, ULPI_OTG_CTRL);
|
|
if (ret < 0)
|
|
return false;
|
|
|
|
return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false;
|
|
}
|
|
|
|
static enum musb_vbus_id_status
|
|
twl4030_usb_linkstat(struct twl4030_usb *twl)
|
|
{
|
|
int status;
|
|
enum musb_vbus_id_status linkstat = MUSB_UNKNOWN;
|
|
|
|
twl->vbus_supplied = false;
|
|
|
|
/*
|
|
* For ID/VBUS sensing, see manual section 15.4.8 ...
|
|
* except when using only battery backup power, two
|
|
* comparators produce VBUS_PRES and ID_PRES signals,
|
|
* which don't match docs elsewhere. But ... BIT(7)
|
|
* and BIT(2) of STS_HW_CONDITIONS, respectively, do
|
|
* seem to match up. If either is true the USB_PRES
|
|
* signal is active, the OTG module is activated, and
|
|
* its interrupt may be raised (may wake the system).
|
|
*/
|
|
status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS);
|
|
if (status < 0)
|
|
dev_err(twl->dev, "USB link status err %d\n", status);
|
|
else if (status & (BIT(7) | BIT(2))) {
|
|
if (status & BIT(7)) {
|
|
if (twl4030_is_driving_vbus(twl))
|
|
status &= ~BIT(7);
|
|
else
|
|
twl->vbus_supplied = true;
|
|
}
|
|
|
|
if (status & BIT(2))
|
|
linkstat = MUSB_ID_GROUND;
|
|
else if (status & BIT(7))
|
|
linkstat = MUSB_VBUS_VALID;
|
|
else
|
|
linkstat = MUSB_VBUS_OFF;
|
|
} else {
|
|
if (twl->linkstat != MUSB_UNKNOWN)
|
|
linkstat = MUSB_VBUS_OFF;
|
|
}
|
|
|
|
kobject_uevent(&twl->dev->kobj, linkstat == MUSB_VBUS_VALID
|
|
? KOBJ_ONLINE : KOBJ_OFFLINE);
|
|
|
|
dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
|
|
status, status, linkstat);
|
|
|
|
/* REVISIT this assumes host and peripheral controllers
|
|
* are registered, and that both are active...
|
|
*/
|
|
|
|
return linkstat;
|
|
}
|
|
|
|
static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode)
|
|
{
|
|
twl->usb_mode = mode;
|
|
|
|
switch (mode) {
|
|
case T2_USB_MODE_ULPI:
|
|
twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL,
|
|
ULPI_IFC_CTRL_CARKITMODE);
|
|
twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
|
|
twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL,
|
|
ULPI_FUNC_CTRL_XCVRSEL_MASK |
|
|
ULPI_FUNC_CTRL_OPMODE_MASK);
|
|
break;
|
|
case -1:
|
|
/* FIXME: power on defaults */
|
|
break;
|
|
default:
|
|
dev_err(twl->dev, "unsupported T2 transceiver mode %d\n",
|
|
mode);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
|
|
{
|
|
unsigned long timeout;
|
|
int val = twl4030_usb_read(twl, PHY_CLK_CTRL);
|
|
|
|
if (val >= 0) {
|
|
if (on) {
|
|
/* enable DPLL to access PHY registers over I2C */
|
|
val |= REQ_PHY_DPLL_CLK;
|
|
WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
|
|
(u8)val) < 0);
|
|
|
|
timeout = jiffies + HZ;
|
|
while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
|
|
PHY_DPLL_CLK)
|
|
&& time_before(jiffies, timeout))
|
|
udelay(10);
|
|
if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
|
|
PHY_DPLL_CLK))
|
|
dev_err(twl->dev, "Timeout setting T2 HSUSB "
|
|
"PHY DPLL clock\n");
|
|
} else {
|
|
/* let ULPI control the DPLL clock */
|
|
val &= ~REQ_PHY_DPLL_CLK;
|
|
WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
|
|
(u8)val) < 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
|
|
{
|
|
u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
|
|
|
|
if (on)
|
|
pwr &= ~PHY_PWR_PHYPWD;
|
|
else
|
|
pwr |= PHY_PWR_PHYPWD;
|
|
|
|
WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
|
|
}
|
|
|
|
static int __maybe_unused twl4030_usb_runtime_suspend(struct device *dev)
|
|
{
|
|
struct twl4030_usb *twl = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(twl->dev, "%s\n", __func__);
|
|
|
|
__twl4030_phy_power(twl, 0);
|
|
regulator_disable(twl->usb1v5);
|
|
regulator_disable(twl->usb1v8);
|
|
regulator_disable(twl->usb3v1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused twl4030_usb_runtime_resume(struct device *dev)
|
|
{
|
|
struct twl4030_usb *twl = dev_get_drvdata(dev);
|
|
int res;
|
|
|
|
dev_dbg(twl->dev, "%s\n", __func__);
|
|
|
|
res = regulator_enable(twl->usb3v1);
|
|
if (res)
|
|
dev_err(twl->dev, "Failed to enable usb3v1\n");
|
|
|
|
res = regulator_enable(twl->usb1v8);
|
|
if (res)
|
|
dev_err(twl->dev, "Failed to enable usb1v8\n");
|
|
|
|
/*
|
|
* Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
|
|
* in twl4030) resets the VUSB_DEDICATED2 register. This reset
|
|
* enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
|
|
* SLEEP. We work around this by clearing the bit after usv3v1
|
|
* is re-activated. This ensures that VUSB3V1 is really active.
|
|
*/
|
|
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
|
|
|
|
res = regulator_enable(twl->usb1v5);
|
|
if (res)
|
|
dev_err(twl->dev, "Failed to enable usb1v5\n");
|
|
|
|
__twl4030_phy_power(twl, 1);
|
|
twl4030_usb_write(twl, PHY_CLK_CTRL,
|
|
twl4030_usb_read(twl, PHY_CLK_CTRL) |
|
|
(PHY_CLK_CTRL_CLOCKGATING_EN |
|
|
PHY_CLK_CTRL_CLK32K_EN));
|
|
|
|
twl4030_i2c_access(twl, 1);
|
|
twl4030_usb_set_mode(twl, twl->usb_mode);
|
|
if (twl->usb_mode == T2_USB_MODE_ULPI)
|
|
twl4030_i2c_access(twl, 0);
|
|
/*
|
|
* According to the TPS65950 TRM, there has to be at least 50ms
|
|
* delay between setting POWER_CTRL_OTG_ENAB and enabling charging
|
|
* so wait here so that a fully enabled phy can be expected after
|
|
* resume
|
|
*/
|
|
msleep(50);
|
|
return 0;
|
|
}
|
|
|
|
static int twl4030_phy_power_off(struct phy *phy)
|
|
{
|
|
struct twl4030_usb *twl = phy_get_drvdata(phy);
|
|
|
|
dev_dbg(twl->dev, "%s\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int twl4030_phy_power_on(struct phy *phy)
|
|
{
|
|
struct twl4030_usb *twl = phy_get_drvdata(phy);
|
|
|
|
dev_dbg(twl->dev, "%s\n", __func__);
|
|
pm_runtime_get_sync(twl->dev);
|
|
schedule_delayed_work(&twl->id_workaround_work, HZ);
|
|
pm_runtime_mark_last_busy(twl->dev);
|
|
pm_runtime_put_autosuspend(twl->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
|
|
{
|
|
/* Enable writing to power configuration registers */
|
|
twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
|
|
TWL4030_PM_MASTER_PROTECT_KEY);
|
|
|
|
twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
|
|
TWL4030_PM_MASTER_PROTECT_KEY);
|
|
|
|
/* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
|
|
/*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
|
|
|
|
/* input to VUSB3V1 LDO is from VBAT, not VBUS */
|
|
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
|
|
|
|
/* Initialize 3.1V regulator */
|
|
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
|
|
|
|
twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1");
|
|
if (IS_ERR(twl->usb3v1))
|
|
return -ENODEV;
|
|
|
|
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
|
|
|
|
/* Initialize 1.5V regulator */
|
|
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
|
|
|
|
twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5");
|
|
if (IS_ERR(twl->usb1v5))
|
|
return -ENODEV;
|
|
|
|
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
|
|
|
|
/* Initialize 1.8V regulator */
|
|
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
|
|
|
|
twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8");
|
|
if (IS_ERR(twl->usb1v8))
|
|
return -ENODEV;
|
|
|
|
twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
|
|
|
|
/* disable access to power configuration registers */
|
|
twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
|
|
TWL4030_PM_MASTER_PROTECT_KEY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t twl4030_usb_vbus_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct twl4030_usb *twl = dev_get_drvdata(dev);
|
|
int ret = -EINVAL;
|
|
|
|
mutex_lock(&twl->lock);
|
|
ret = sprintf(buf, "%s\n",
|
|
twl->vbus_supplied ? "on" : "off");
|
|
mutex_unlock(&twl->lock);
|
|
|
|
return ret;
|
|
}
|
|
static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
|
|
|
|
static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
|
|
{
|
|
struct twl4030_usb *twl = _twl;
|
|
enum musb_vbus_id_status status;
|
|
bool status_changed = false;
|
|
int err;
|
|
|
|
status = twl4030_usb_linkstat(twl);
|
|
|
|
mutex_lock(&twl->lock);
|
|
if (status >= 0 && status != twl->linkstat) {
|
|
status_changed =
|
|
cable_present(twl->linkstat) !=
|
|
cable_present(status);
|
|
twl->linkstat = status;
|
|
}
|
|
mutex_unlock(&twl->lock);
|
|
|
|
if (status_changed) {
|
|
/* FIXME add a set_power() method so that B-devices can
|
|
* configure the charger appropriately. It's not always
|
|
* correct to consume VBUS power, and how much current to
|
|
* consume is a function of the USB configuration chosen
|
|
* by the host.
|
|
*
|
|
* REVISIT usb_gadget_vbus_connect(...) as needed, ditto
|
|
* its disconnect() sibling, when changing to/from the
|
|
* USB_LINK_VBUS state. musb_hdrc won't care until it
|
|
* starts to handle softconnect right.
|
|
*/
|
|
if (cable_present(status)) {
|
|
pm_runtime_get_sync(twl->dev);
|
|
} else {
|
|
pm_runtime_mark_last_busy(twl->dev);
|
|
pm_runtime_put_autosuspend(twl->dev);
|
|
}
|
|
twl->musb_mailbox_pending = true;
|
|
}
|
|
if (twl->musb_mailbox_pending) {
|
|
err = musb_mailbox(status);
|
|
if (!err)
|
|
twl->musb_mailbox_pending = false;
|
|
}
|
|
|
|
/* don't schedule during sleep - irq works right then */
|
|
if (status == MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
|
|
cancel_delayed_work(&twl->id_workaround_work);
|
|
schedule_delayed_work(&twl->id_workaround_work, HZ);
|
|
}
|
|
|
|
if (irq)
|
|
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void twl4030_id_workaround_work(struct work_struct *work)
|
|
{
|
|
struct twl4030_usb *twl = container_of(work, struct twl4030_usb,
|
|
id_workaround_work.work);
|
|
|
|
twl4030_usb_irq(0, twl);
|
|
}
|
|
|
|
static int twl4030_phy_init(struct phy *phy)
|
|
{
|
|
struct twl4030_usb *twl = phy_get_drvdata(phy);
|
|
|
|
pm_runtime_get_sync(twl->dev);
|
|
twl->linkstat = MUSB_UNKNOWN;
|
|
schedule_delayed_work(&twl->id_workaround_work, HZ);
|
|
pm_runtime_mark_last_busy(twl->dev);
|
|
pm_runtime_put_autosuspend(twl->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int twl4030_set_peripheral(struct usb_otg *otg,
|
|
struct usb_gadget *gadget)
|
|
{
|
|
if (!otg)
|
|
return -ENODEV;
|
|
|
|
otg->gadget = gadget;
|
|
if (!gadget)
|
|
otg->state = OTG_STATE_UNDEFINED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host)
|
|
{
|
|
if (!otg)
|
|
return -ENODEV;
|
|
|
|
otg->host = host;
|
|
if (!host)
|
|
otg->state = OTG_STATE_UNDEFINED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops ops = {
|
|
.init = twl4030_phy_init,
|
|
.power_on = twl4030_phy_power_on,
|
|
.power_off = twl4030_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct dev_pm_ops twl4030_usb_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(twl4030_usb_runtime_suspend,
|
|
twl4030_usb_runtime_resume, NULL)
|
|
};
|
|
|
|
static int twl4030_usb_probe(struct platform_device *pdev)
|
|
{
|
|
struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev);
|
|
struct twl4030_usb *twl;
|
|
struct phy *phy;
|
|
int status, err;
|
|
struct usb_otg *otg;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct phy_provider *phy_provider;
|
|
|
|
twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
|
|
if (!twl)
|
|
return -ENOMEM;
|
|
|
|
if (np)
|
|
of_property_read_u32(np, "usb_mode",
|
|
(enum twl4030_usb_mode *)&twl->usb_mode);
|
|
else if (pdata) {
|
|
twl->usb_mode = pdata->usb_mode;
|
|
} else {
|
|
dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
|
|
if (!otg)
|
|
return -ENOMEM;
|
|
|
|
twl->dev = &pdev->dev;
|
|
twl->irq = platform_get_irq(pdev, 0);
|
|
twl->vbus_supplied = false;
|
|
twl->linkstat = MUSB_UNKNOWN;
|
|
twl->musb_mailbox_pending = false;
|
|
|
|
twl->phy.dev = twl->dev;
|
|
twl->phy.label = "twl4030";
|
|
twl->phy.otg = otg;
|
|
twl->phy.type = USB_PHY_TYPE_USB2;
|
|
|
|
otg->usb_phy = &twl->phy;
|
|
otg->set_host = twl4030_set_host;
|
|
otg->set_peripheral = twl4030_set_peripheral;
|
|
|
|
phy = devm_phy_create(twl->dev, NULL, &ops);
|
|
if (IS_ERR(phy)) {
|
|
dev_dbg(&pdev->dev, "Failed to create PHY\n");
|
|
return PTR_ERR(phy);
|
|
}
|
|
|
|
phy_set_drvdata(phy, twl);
|
|
|
|
phy_provider = devm_of_phy_provider_register(twl->dev,
|
|
of_phy_simple_xlate);
|
|
if (IS_ERR(phy_provider))
|
|
return PTR_ERR(phy_provider);
|
|
|
|
/* init mutex for workqueue */
|
|
mutex_init(&twl->lock);
|
|
|
|
INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work);
|
|
|
|
err = twl4030_usb_ldo_init(twl);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "ldo init failed\n");
|
|
return err;
|
|
}
|
|
usb_add_phy_dev(&twl->phy);
|
|
|
|
platform_set_drvdata(pdev, twl);
|
|
if (device_create_file(&pdev->dev, &dev_attr_vbus))
|
|
dev_warn(&pdev->dev, "could not create sysfs file\n");
|
|
|
|
ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
|
|
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
|
|
pm_runtime_enable(&pdev->dev);
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
|
|
/* Our job is to use irqs and status from the power module
|
|
* to keep the transceiver disabled when nothing's connected.
|
|
*
|
|
* FIXME we actually shouldn't start enabling it until the
|
|
* USB controller drivers have said they're ready, by calling
|
|
* set_host() and/or set_peripheral() ... OTG_capable boards
|
|
* need both handles, otherwise just one suffices.
|
|
*/
|
|
status = devm_request_threaded_irq(twl->dev, twl->irq, NULL,
|
|
twl4030_usb_irq, IRQF_TRIGGER_FALLING |
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl);
|
|
if (status < 0) {
|
|
dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
|
|
twl->irq, status);
|
|
return status;
|
|
}
|
|
|
|
if (pdata)
|
|
err = phy_create_lookup(phy, "usb", "musb-hdrc.0");
|
|
if (err)
|
|
return err;
|
|
|
|
pm_runtime_mark_last_busy(&pdev->dev);
|
|
pm_runtime_put_autosuspend(twl->dev);
|
|
|
|
dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
|
|
return 0;
|
|
}
|
|
|
|
static int twl4030_usb_remove(struct platform_device *pdev)
|
|
{
|
|
struct twl4030_usb *twl = platform_get_drvdata(pdev);
|
|
int val;
|
|
|
|
usb_remove_phy(&twl->phy);
|
|
pm_runtime_get_sync(twl->dev);
|
|
cancel_delayed_work(&twl->id_workaround_work);
|
|
device_remove_file(twl->dev, &dev_attr_vbus);
|
|
|
|
/* set transceiver mode to power on defaults */
|
|
twl4030_usb_set_mode(twl, -1);
|
|
|
|
/* idle ulpi before powering off */
|
|
if (cable_present(twl->linkstat))
|
|
pm_runtime_put_noidle(twl->dev);
|
|
pm_runtime_mark_last_busy(twl->dev);
|
|
pm_runtime_dont_use_autosuspend(&pdev->dev);
|
|
pm_runtime_put_sync(twl->dev);
|
|
pm_runtime_disable(twl->dev);
|
|
|
|
/* autogate 60MHz ULPI clock,
|
|
* clear dpll clock request for i2c access,
|
|
* disable 32KHz
|
|
*/
|
|
val = twl4030_usb_read(twl, PHY_CLK_CTRL);
|
|
if (val >= 0) {
|
|
val |= PHY_CLK_CTRL_CLOCKGATING_EN;
|
|
val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK);
|
|
twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val);
|
|
}
|
|
|
|
/* disable complete OTG block */
|
|
twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id twl4030_usb_id_table[] = {
|
|
{ .compatible = "ti,twl4030-usb" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, twl4030_usb_id_table);
|
|
#endif
|
|
|
|
static struct platform_driver twl4030_usb_driver = {
|
|
.probe = twl4030_usb_probe,
|
|
.remove = twl4030_usb_remove,
|
|
.driver = {
|
|
.name = "twl4030_usb",
|
|
.pm = &twl4030_usb_pm_ops,
|
|
.of_match_table = of_match_ptr(twl4030_usb_id_table),
|
|
},
|
|
};
|
|
|
|
static int __init twl4030_usb_init(void)
|
|
{
|
|
return platform_driver_register(&twl4030_usb_driver);
|
|
}
|
|
subsys_initcall(twl4030_usb_init);
|
|
|
|
static void __exit twl4030_usb_exit(void)
|
|
{
|
|
platform_driver_unregister(&twl4030_usb_driver);
|
|
}
|
|
module_exit(twl4030_usb_exit);
|
|
|
|
MODULE_ALIAS("platform:twl4030_usb");
|
|
MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation");
|
|
MODULE_DESCRIPTION("TWL4030 USB transceiver driver");
|
|
MODULE_LICENSE("GPL");
|