linux-stable/drivers/xen/xen-pciback/xenbus.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

743 lines
18 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* PCI Backend Xenbus Setup - handles setup with frontend and xend
*
* Author: Ryan Wilson <hap9@epoch.ncsc.mil>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/vmalloc.h>
#include <linux/workqueue.h>
#include <xen/xenbus.h>
#include <xen/events.h>
#include <asm/xen/pci.h>
#include "pciback.h"
#define INVALID_EVTCHN_IRQ (-1)
static bool __read_mostly passthrough;
module_param(passthrough, bool, S_IRUGO);
MODULE_PARM_DESC(passthrough,
"Option to specify how to export PCI topology to guest:\n"\
" 0 - (default) Hide the true PCI topology and makes the frontend\n"\
" there is a single PCI bus with only the exported devices on it.\n"\
" For example, a device at 03:05.0 will be re-assigned to 00:00.0\n"\
" while second device at 02:1a.1 will be re-assigned to 00:01.1.\n"\
" 1 - Passthrough provides a real view of the PCI topology to the\n"\
" frontend (for example, a device at 06:01.b will still appear at\n"\
" 06:01.b to the frontend). This is similar to how Xen 2.0.x\n"\
" exposed PCI devices to its driver domains. This may be required\n"\
" for drivers which depend on finding their hardward in certain\n"\
" bus/slot locations.");
static struct xen_pcibk_device *alloc_pdev(struct xenbus_device *xdev)
{
struct xen_pcibk_device *pdev;
pdev = kzalloc(sizeof(struct xen_pcibk_device), GFP_KERNEL);
if (pdev == NULL)
goto out;
dev_dbg(&xdev->dev, "allocated pdev @ 0x%p\n", pdev);
pdev->xdev = xdev;
mutex_init(&pdev->dev_lock);
pdev->sh_info = NULL;
pdev->evtchn_irq = INVALID_EVTCHN_IRQ;
pdev->be_watching = 0;
INIT_WORK(&pdev->op_work, xen_pcibk_do_op);
if (xen_pcibk_init_devices(pdev)) {
kfree(pdev);
pdev = NULL;
}
dev_set_drvdata(&xdev->dev, pdev);
out:
return pdev;
}
static void xen_pcibk_disconnect(struct xen_pcibk_device *pdev)
{
mutex_lock(&pdev->dev_lock);
/* Ensure the guest can't trigger our handler before removing devices */
if (pdev->evtchn_irq != INVALID_EVTCHN_IRQ) {
unbind_from_irqhandler(pdev->evtchn_irq, pdev);
pdev->evtchn_irq = INVALID_EVTCHN_IRQ;
}
/* If the driver domain started an op, make sure we complete it
* before releasing the shared memory */
flush_work(&pdev->op_work);
if (pdev->sh_info != NULL) {
xenbus_unmap_ring_vfree(pdev->xdev, pdev->sh_info);
pdev->sh_info = NULL;
}
mutex_unlock(&pdev->dev_lock);
}
static void free_pdev(struct xen_pcibk_device *pdev)
{
if (pdev->be_watching) {
unregister_xenbus_watch(&pdev->be_watch);
pdev->be_watching = 0;
}
xen_pcibk_disconnect(pdev);
/* N.B. This calls pcistub_put_pci_dev which does the FLR on all
* of the PCIe devices. */
xen_pcibk_release_devices(pdev);
dev_set_drvdata(&pdev->xdev->dev, NULL);
pdev->xdev = NULL;
kfree(pdev);
}
static int xen_pcibk_do_attach(struct xen_pcibk_device *pdev, int gnt_ref,
int remote_evtchn)
{
int err = 0;
void *vaddr;
dev_dbg(&pdev->xdev->dev,
"Attaching to frontend resources - gnt_ref=%d evtchn=%d\n",
gnt_ref, remote_evtchn);
err = xenbus_map_ring_valloc(pdev->xdev, &gnt_ref, 1, &vaddr);
if (err < 0) {
xenbus_dev_fatal(pdev->xdev, err,
"Error mapping other domain page in ours.");
goto out;
}
pdev->sh_info = vaddr;
err = bind_interdomain_evtchn_to_irqhandler(
pdev->xdev->otherend_id, remote_evtchn, xen_pcibk_handle_event,
0, DRV_NAME, pdev);
if (err < 0) {
xenbus_dev_fatal(pdev->xdev, err,
"Error binding event channel to IRQ");
goto out;
}
pdev->evtchn_irq = err;
err = 0;
dev_dbg(&pdev->xdev->dev, "Attached!\n");
out:
return err;
}
static int xen_pcibk_attach(struct xen_pcibk_device *pdev)
{
int err = 0;
int gnt_ref, remote_evtchn;
char *magic = NULL;
mutex_lock(&pdev->dev_lock);
/* Make sure we only do this setup once */
if (xenbus_read_driver_state(pdev->xdev->nodename) !=
XenbusStateInitialised)
goto out;
/* Wait for frontend to state that it has published the configuration */
if (xenbus_read_driver_state(pdev->xdev->otherend) !=
XenbusStateInitialised)
goto out;
dev_dbg(&pdev->xdev->dev, "Reading frontend config\n");
err = xenbus_gather(XBT_NIL, pdev->xdev->otherend,
"pci-op-ref", "%u", &gnt_ref,
"event-channel", "%u", &remote_evtchn,
"magic", NULL, &magic, NULL);
if (err) {
/* If configuration didn't get read correctly, wait longer */
xenbus_dev_fatal(pdev->xdev, err,
"Error reading configuration from frontend");
goto out;
}
if (magic == NULL || strcmp(magic, XEN_PCI_MAGIC) != 0) {
xenbus_dev_fatal(pdev->xdev, -EFAULT,
"version mismatch (%s/%s) with pcifront - "
"halting " DRV_NAME,
magic, XEN_PCI_MAGIC);
err = -EFAULT;
goto out;
}
err = xen_pcibk_do_attach(pdev, gnt_ref, remote_evtchn);
if (err)
goto out;
dev_dbg(&pdev->xdev->dev, "Connecting...\n");
err = xenbus_switch_state(pdev->xdev, XenbusStateConnected);
if (err)
xenbus_dev_fatal(pdev->xdev, err,
"Error switching to connected state!");
dev_dbg(&pdev->xdev->dev, "Connected? %d\n", err);
out:
mutex_unlock(&pdev->dev_lock);
kfree(magic);
return err;
}
static int xen_pcibk_publish_pci_dev(struct xen_pcibk_device *pdev,
unsigned int domain, unsigned int bus,
unsigned int devfn, unsigned int devid)
{
int err;
int len;
char str[64];
len = snprintf(str, sizeof(str), "vdev-%d", devid);
if (unlikely(len >= (sizeof(str) - 1))) {
err = -ENOMEM;
goto out;
}
/* Note: The PV protocol uses %02x, don't change it */
err = xenbus_printf(XBT_NIL, pdev->xdev->nodename, str,
"%04x:%02x:%02x.%02x", domain, bus,
PCI_SLOT(devfn), PCI_FUNC(devfn));
out:
return err;
}
static int xen_pcibk_export_device(struct xen_pcibk_device *pdev,
int domain, int bus, int slot, int func,
int devid)
{
struct pci_dev *dev;
int err = 0;
dev_dbg(&pdev->xdev->dev, "exporting dom %x bus %x slot %x func %x\n",
domain, bus, slot, func);
dev = pcistub_get_pci_dev_by_slot(pdev, domain, bus, slot, func);
if (!dev) {
err = -EINVAL;
xenbus_dev_fatal(pdev->xdev, err,
"Couldn't locate PCI device "
"(%04x:%02x:%02x.%d)! "
"perhaps already in-use?",
domain, bus, slot, func);
goto out;
}
err = xen_pcibk_add_pci_dev(pdev, dev, devid,
xen_pcibk_publish_pci_dev);
if (err)
goto out;
dev_info(&dev->dev, "registering for %d\n", pdev->xdev->otherend_id);
if (xen_register_device_domain_owner(dev,
pdev->xdev->otherend_id) != 0) {
dev_err(&dev->dev, "Stealing ownership from dom%d.\n",
xen_find_device_domain_owner(dev));
xen_unregister_device_domain_owner(dev);
xen_register_device_domain_owner(dev, pdev->xdev->otherend_id);
}
/* TODO: It'd be nice to export a bridge and have all of its children
* get exported with it. This may be best done in xend (which will
* have to calculate resource usage anyway) but we probably want to
* put something in here to ensure that if a bridge gets given to a
* driver domain, that all devices under that bridge are not given
* to other driver domains (as he who controls the bridge can disable
* it and stop the other devices from working).
*/
out:
return err;
}
static int xen_pcibk_remove_device(struct xen_pcibk_device *pdev,
int domain, int bus, int slot, int func)
{
int err = 0;
struct pci_dev *dev;
dev_dbg(&pdev->xdev->dev, "removing dom %x bus %x slot %x func %x\n",
domain, bus, slot, func);
dev = xen_pcibk_get_pci_dev(pdev, domain, bus, PCI_DEVFN(slot, func));
if (!dev) {
err = -EINVAL;
dev_dbg(&pdev->xdev->dev, "Couldn't locate PCI device "
"(%04x:%02x:%02x.%d)! not owned by this domain\n",
domain, bus, slot, func);
goto out;
}
dev_dbg(&dev->dev, "unregistering for %d\n", pdev->xdev->otherend_id);
xen_unregister_device_domain_owner(dev);
/* N.B. This ends up calling pcistub_put_pci_dev which ends up
* doing the FLR. */
xen_pcibk_release_pci_dev(pdev, dev, true /* use the lock. */);
out:
return err;
}
static int xen_pcibk_publish_pci_root(struct xen_pcibk_device *pdev,
unsigned int domain, unsigned int bus)
{
unsigned int d, b;
int i, root_num, len, err;
char str[64];
dev_dbg(&pdev->xdev->dev, "Publishing pci roots\n");
err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename,
"root_num", "%d", &root_num);
if (err == 0 || err == -ENOENT)
root_num = 0;
else if (err < 0)
goto out;
/* Verify that we haven't already published this pci root */
for (i = 0; i < root_num; i++) {
len = snprintf(str, sizeof(str), "root-%d", i);
if (unlikely(len >= (sizeof(str) - 1))) {
err = -ENOMEM;
goto out;
}
err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename,
str, "%x:%x", &d, &b);
if (err < 0)
goto out;
if (err != 2) {
err = -EINVAL;
goto out;
}
if (d == domain && b == bus) {
err = 0;
goto out;
}
}
len = snprintf(str, sizeof(str), "root-%d", root_num);
if (unlikely(len >= (sizeof(str) - 1))) {
err = -ENOMEM;
goto out;
}
dev_dbg(&pdev->xdev->dev, "writing root %d at %04x:%02x\n",
root_num, domain, bus);
err = xenbus_printf(XBT_NIL, pdev->xdev->nodename, str,
"%04x:%02x", domain, bus);
if (err)
goto out;
err = xenbus_printf(XBT_NIL, pdev->xdev->nodename,
"root_num", "%d", (root_num + 1));
out:
return err;
}
static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev)
{
int err = 0;
int num_devs;
int domain, bus, slot, func;
unsigned int substate;
int i, len;
char state_str[64];
char dev_str[64];
dev_dbg(&pdev->xdev->dev, "Reconfiguring device ...\n");
mutex_lock(&pdev->dev_lock);
/* Make sure we only reconfigure once */
if (xenbus_read_driver_state(pdev->xdev->nodename) !=
XenbusStateReconfiguring)
goto out;
err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename, "num_devs", "%d",
&num_devs);
if (err != 1) {
if (err >= 0)
err = -EINVAL;
xenbus_dev_fatal(pdev->xdev, err,
"Error reading number of devices");
goto out;
}
for (i = 0; i < num_devs; i++) {
len = snprintf(state_str, sizeof(state_str), "state-%d", i);
if (unlikely(len >= (sizeof(state_str) - 1))) {
err = -ENOMEM;
xenbus_dev_fatal(pdev->xdev, err,
"String overflow while reading "
"configuration");
goto out;
}
substate = xenbus_read_unsigned(pdev->xdev->nodename, state_str,
XenbusStateUnknown);
switch (substate) {
case XenbusStateInitialising:
dev_dbg(&pdev->xdev->dev, "Attaching dev-%d ...\n", i);
len = snprintf(dev_str, sizeof(dev_str), "dev-%d", i);
if (unlikely(len >= (sizeof(dev_str) - 1))) {
err = -ENOMEM;
xenbus_dev_fatal(pdev->xdev, err,
"String overflow while "
"reading configuration");
goto out;
}
err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename,
dev_str, "%x:%x:%x.%x",
&domain, &bus, &slot, &func);
if (err < 0) {
xenbus_dev_fatal(pdev->xdev, err,
"Error reading device "
"configuration");
goto out;
}
if (err != 4) {
err = -EINVAL;
xenbus_dev_fatal(pdev->xdev, err,
"Error parsing pci device "
"configuration");
goto out;
}
err = xen_pcibk_export_device(pdev, domain, bus, slot,
func, i);
if (err)
goto out;
/* Publish pci roots. */
err = xen_pcibk_publish_pci_roots(pdev,
xen_pcibk_publish_pci_root);
if (err) {
xenbus_dev_fatal(pdev->xdev, err,
"Error while publish PCI root"
"buses for frontend");
goto out;
}
err = xenbus_printf(XBT_NIL, pdev->xdev->nodename,
state_str, "%d",
XenbusStateInitialised);
if (err) {
xenbus_dev_fatal(pdev->xdev, err,
"Error switching substate of "
"dev-%d\n", i);
goto out;
}
break;
case XenbusStateClosing:
dev_dbg(&pdev->xdev->dev, "Detaching dev-%d ...\n", i);
len = snprintf(dev_str, sizeof(dev_str), "vdev-%d", i);
if (unlikely(len >= (sizeof(dev_str) - 1))) {
err = -ENOMEM;
xenbus_dev_fatal(pdev->xdev, err,
"String overflow while "
"reading configuration");
goto out;
}
err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename,
dev_str, "%x:%x:%x.%x",
&domain, &bus, &slot, &func);
if (err < 0) {
xenbus_dev_fatal(pdev->xdev, err,
"Error reading device "
"configuration");
goto out;
}
if (err != 4) {
err = -EINVAL;
xenbus_dev_fatal(pdev->xdev, err,
"Error parsing pci device "
"configuration");
goto out;
}
err = xen_pcibk_remove_device(pdev, domain, bus, slot,
func);
if (err)
goto out;
/* TODO: If at some point we implement support for pci
* root hot-remove on pcifront side, we'll need to
* remove unnecessary xenstore nodes of pci roots here.
*/
break;
default:
break;
}
}
err = xenbus_switch_state(pdev->xdev, XenbusStateReconfigured);
if (err) {
xenbus_dev_fatal(pdev->xdev, err,
"Error switching to reconfigured state!");
goto out;
}
out:
mutex_unlock(&pdev->dev_lock);
return 0;
}
static void xen_pcibk_frontend_changed(struct xenbus_device *xdev,
enum xenbus_state fe_state)
{
struct xen_pcibk_device *pdev = dev_get_drvdata(&xdev->dev);
dev_dbg(&xdev->dev, "fe state changed %d\n", fe_state);
switch (fe_state) {
case XenbusStateInitialised:
xen_pcibk_attach(pdev);
break;
case XenbusStateReconfiguring:
xen_pcibk_reconfigure(pdev);
break;
case XenbusStateConnected:
/* pcifront switched its state from reconfiguring to connected.
* Then switch to connected state.
*/
xenbus_switch_state(xdev, XenbusStateConnected);
break;
case XenbusStateClosing:
xen_pcibk_disconnect(pdev);
xenbus_switch_state(xdev, XenbusStateClosing);
break;
case XenbusStateClosed:
xen_pcibk_disconnect(pdev);
xenbus_switch_state(xdev, XenbusStateClosed);
if (xenbus_dev_is_online(xdev))
break;
/* fall through if not online */
case XenbusStateUnknown:
dev_dbg(&xdev->dev, "frontend is gone! unregister device\n");
device_unregister(&xdev->dev);
break;
default:
break;
}
}
static int xen_pcibk_setup_backend(struct xen_pcibk_device *pdev)
{
/* Get configuration from xend (if available now) */
int domain, bus, slot, func;
int err = 0;
int i, num_devs;
char dev_str[64];
char state_str[64];
mutex_lock(&pdev->dev_lock);
/* It's possible we could get the call to setup twice, so make sure
* we're not already connected.
*/
if (xenbus_read_driver_state(pdev->xdev->nodename) !=
XenbusStateInitWait)
goto out;
dev_dbg(&pdev->xdev->dev, "getting be setup\n");
err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename, "num_devs", "%d",
&num_devs);
if (err != 1) {
if (err >= 0)
err = -EINVAL;
xenbus_dev_fatal(pdev->xdev, err,
"Error reading number of devices");
goto out;
}
for (i = 0; i < num_devs; i++) {
int l = snprintf(dev_str, sizeof(dev_str), "dev-%d", i);
if (unlikely(l >= (sizeof(dev_str) - 1))) {
err = -ENOMEM;
xenbus_dev_fatal(pdev->xdev, err,
"String overflow while reading "
"configuration");
goto out;
}
err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename, dev_str,
"%x:%x:%x.%x", &domain, &bus, &slot, &func);
if (err < 0) {
xenbus_dev_fatal(pdev->xdev, err,
"Error reading device configuration");
goto out;
}
if (err != 4) {
err = -EINVAL;
xenbus_dev_fatal(pdev->xdev, err,
"Error parsing pci device "
"configuration");
goto out;
}
err = xen_pcibk_export_device(pdev, domain, bus, slot, func, i);
if (err)
goto out;
/* Switch substate of this device. */
l = snprintf(state_str, sizeof(state_str), "state-%d", i);
if (unlikely(l >= (sizeof(state_str) - 1))) {
err = -ENOMEM;
xenbus_dev_fatal(pdev->xdev, err,
"String overflow while reading "
"configuration");
goto out;
}
err = xenbus_printf(XBT_NIL, pdev->xdev->nodename, state_str,
"%d", XenbusStateInitialised);
if (err) {
xenbus_dev_fatal(pdev->xdev, err, "Error switching "
"substate of dev-%d\n", i);
goto out;
}
}
err = xen_pcibk_publish_pci_roots(pdev, xen_pcibk_publish_pci_root);
if (err) {
xenbus_dev_fatal(pdev->xdev, err,
"Error while publish PCI root buses "
"for frontend");
goto out;
}
err = xenbus_switch_state(pdev->xdev, XenbusStateInitialised);
if (err)
xenbus_dev_fatal(pdev->xdev, err,
"Error switching to initialised state!");
out:
mutex_unlock(&pdev->dev_lock);
if (!err)
/* see if pcifront is already configured (if not, we'll wait) */
xen_pcibk_attach(pdev);
return err;
}
static void xen_pcibk_be_watch(struct xenbus_watch *watch,
const char *path, const char *token)
{
struct xen_pcibk_device *pdev =
container_of(watch, struct xen_pcibk_device, be_watch);
switch (xenbus_read_driver_state(pdev->xdev->nodename)) {
case XenbusStateInitWait:
xen_pcibk_setup_backend(pdev);
break;
default:
break;
}
}
static int xen_pcibk_xenbus_probe(struct xenbus_device *dev,
const struct xenbus_device_id *id)
{
int err = 0;
struct xen_pcibk_device *pdev = alloc_pdev(dev);
if (pdev == NULL) {
err = -ENOMEM;
xenbus_dev_fatal(dev, err,
"Error allocating xen_pcibk_device struct");
goto out;
}
/* wait for xend to configure us */
err = xenbus_switch_state(dev, XenbusStateInitWait);
if (err)
goto out;
/* watch the backend node for backend configuration information */
err = xenbus_watch_path(dev, dev->nodename, &pdev->be_watch,
xen_pcibk_be_watch);
if (err)
goto out;
pdev->be_watching = 1;
/* We need to force a call to our callback here in case
* xend already configured us!
*/
xen_pcibk_be_watch(&pdev->be_watch, NULL, 0);
out:
return err;
}
static int xen_pcibk_xenbus_remove(struct xenbus_device *dev)
{
struct xen_pcibk_device *pdev = dev_get_drvdata(&dev->dev);
if (pdev != NULL)
free_pdev(pdev);
return 0;
}
static const struct xenbus_device_id xen_pcibk_ids[] = {
{"pci"},
{""},
};
static struct xenbus_driver xen_pcibk_driver = {
.name = DRV_NAME,
.ids = xen_pcibk_ids,
.probe = xen_pcibk_xenbus_probe,
.remove = xen_pcibk_xenbus_remove,
.otherend_changed = xen_pcibk_frontend_changed,
};
const struct xen_pcibk_backend *__read_mostly xen_pcibk_backend;
int __init xen_pcibk_xenbus_register(void)
{
xen_pcibk_backend = &xen_pcibk_vpci_backend;
if (passthrough)
xen_pcibk_backend = &xen_pcibk_passthrough_backend;
pr_info("backend is %s\n", xen_pcibk_backend->name);
return xenbus_register_backend(&xen_pcibk_driver);
}
void __exit xen_pcibk_xenbus_unregister(void)
{
xenbus_unregister_driver(&xen_pcibk_driver);
}