mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-24 19:35:58 +00:00
246a1c4c6b
The pata_parport is a libata-based replacement of the old PARIDE subsystem - driver for parallel port IDE devices. It uses the original paride low-level protocol drivers but does not need the high-level drivers (pd, pcd, pf, pt, pg). The IDE devices behind parallel port adapters are handled by the ATA layer. This will allow paride and its high-level drivers to be removed. Unfortunately, libata drivers cannot sleep so pata_parport claims parport before activating the ata host and keeps it claimed (and protocol connected) until the ata host is removed. This means that no devices can be chained (neither other pata_parport devices nor a printer). paride and pata_parport are mutually exclusive because the compiled protocol drivers are incompatible. Tested with: - Imation SuperDisk LS-120 and HP C4381A (EPAT) - Freecom Parallel CD (FRPW) - Toshiba Mobile CD-RW 2793008 w/Freecom Parallel Cable rev.903 (FRIQ) - Backpack CD-RW 222011 and CD-RW 19350 (BPCK6) The following bugs in low-level protocol drivers were found and will be fixed later: Note: EPP-32 mode is buggy in EPAT - and also in all other protocol drivers - they don't handle non-multiple-of-4 block transfers correctly. This causes problems with LS-120 drive. There is also another bug in EPAT: EPP modes don't work unless a 4-bit or 8-bit mode is used first (probably some initialization missing?). Once the device is initialized, EPP works until power cycle. So after device power on, you have to: echo "parport0 epat 0" >/sys/bus/pata_parport/new_device echo pata_parport.0 >/sys/bus/pata_parport/delete_device echo "parport0 epat 4" >/sys/bus/pata_parport/new_device (autoprobe will initialize correctly as it tries the slowest modes first but you'll get the broken EPP-32 mode) Note: EPP modes are buggy in FRPW, only modes 0 and 1 work. Signed-off-by: Ondrej Zary <linux@zary.sk> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
191 lines
5.3 KiB
Makefile
191 lines
5.3 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Makefile for the Linux kernel device drivers.
|
|
#
|
|
# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
|
|
# Rewritten to use lists instead of if-statements.
|
|
#
|
|
|
|
obj-y += irqchip/
|
|
obj-y += bus/
|
|
|
|
obj-$(CONFIG_GENERIC_PHY) += phy/
|
|
|
|
# GPIO must come after pinctrl as gpios may need to mux pins etc
|
|
obj-$(CONFIG_PINCTRL) += pinctrl/
|
|
obj-$(CONFIG_GPIOLIB) += gpio/
|
|
obj-y += pwm/
|
|
|
|
obj-y += pci/
|
|
|
|
obj-$(CONFIG_PARISC) += parisc/
|
|
obj-$(CONFIG_RAPIDIO) += rapidio/
|
|
obj-y += video/
|
|
obj-y += idle/
|
|
|
|
# IPMI must come before ACPI in order to provide IPMI opregion support
|
|
obj-y += char/ipmi/
|
|
|
|
obj-$(CONFIG_ACPI) += acpi/
|
|
|
|
# PnP must come after ACPI since it will eventually need to check if acpi
|
|
# was used and do nothing if so
|
|
obj-$(CONFIG_PNP) += pnp/
|
|
obj-y += amba/
|
|
|
|
obj-y += clk/
|
|
# Many drivers will want to use DMA so this has to be made available
|
|
# really early.
|
|
obj-$(CONFIG_DMADEVICES) += dma/
|
|
|
|
# SOC specific infrastructure drivers.
|
|
obj-y += soc/
|
|
|
|
obj-y += virtio/
|
|
obj-$(CONFIG_VDPA) += vdpa/
|
|
obj-$(CONFIG_XEN) += xen/
|
|
|
|
# regulators early, since some subsystems rely on them to initialize
|
|
obj-$(CONFIG_REGULATOR) += regulator/
|
|
|
|
# reset controllers early, since gpu drivers might rely on them to initialize
|
|
obj-$(CONFIG_RESET_CONTROLLER) += reset/
|
|
|
|
# tty/ comes before char/ so that the VT console is the boot-time
|
|
# default.
|
|
obj-y += tty/
|
|
obj-y += char/
|
|
|
|
# iommu/ comes before gpu as gpu are using iommu controllers
|
|
obj-y += iommu/
|
|
|
|
# gpu/ comes after char for AGP vs DRM startup and after iommu
|
|
obj-y += gpu/
|
|
|
|
obj-$(CONFIG_CONNECTOR) += connector/
|
|
|
|
# i810fb and intelfb depend on char/agp/
|
|
obj-$(CONFIG_FB_I810) += video/fbdev/i810/
|
|
obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
|
|
|
|
obj-$(CONFIG_PARPORT) += parport/
|
|
obj-y += base/ block/ misc/ mfd/ nfc/
|
|
obj-$(CONFIG_LIBNVDIMM) += nvdimm/
|
|
obj-$(CONFIG_DAX) += dax/
|
|
obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
|
|
obj-$(CONFIG_NUBUS) += nubus/
|
|
obj-y += cxl/
|
|
obj-y += macintosh/
|
|
obj-y += scsi/
|
|
obj-y += nvme/
|
|
obj-$(CONFIG_ATA) += ata/
|
|
obj-$(CONFIG_TARGET_CORE) += target/
|
|
obj-$(CONFIG_MTD) += mtd/
|
|
obj-$(CONFIG_SPI) += spi/
|
|
obj-$(CONFIG_SPMI) += spmi/
|
|
obj-$(CONFIG_HSI) += hsi/
|
|
obj-$(CONFIG_SLIMBUS) += slimbus/
|
|
obj-y += net/
|
|
obj-$(CONFIG_ATM) += atm/
|
|
obj-$(CONFIG_FUSION) += message/
|
|
obj-y += firewire/
|
|
obj-$(CONFIG_UIO) += uio/
|
|
obj-$(CONFIG_VFIO) += vfio/
|
|
obj-y += cdrom/
|
|
obj-y += auxdisplay/
|
|
obj-$(CONFIG_PCCARD) += pcmcia/
|
|
obj-$(CONFIG_DIO) += dio/
|
|
obj-$(CONFIG_SBUS) += sbus/
|
|
obj-$(CONFIG_ZORRO) += zorro/
|
|
obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/
|
|
obj-y += block/paride/
|
|
obj-$(CONFIG_TC) += tc/
|
|
obj-$(CONFIG_USB_PHY) += usb/
|
|
obj-$(CONFIG_USB) += usb/
|
|
obj-$(CONFIG_USB_SUPPORT) += usb/
|
|
obj-$(CONFIG_PCI) += usb/
|
|
obj-$(CONFIG_USB_GADGET) += usb/
|
|
obj-$(CONFIG_OF) += usb/
|
|
obj-$(CONFIG_SERIO) += input/serio/
|
|
obj-$(CONFIG_GAMEPORT) += input/gameport/
|
|
obj-$(CONFIG_INPUT) += input/
|
|
obj-$(CONFIG_RTC_LIB) += rtc/
|
|
obj-y += i2c/ i3c/ media/
|
|
obj-$(CONFIG_PPS) += pps/
|
|
obj-y += ptp/
|
|
obj-$(CONFIG_W1) += w1/
|
|
obj-y += power/
|
|
obj-$(CONFIG_HWMON) += hwmon/
|
|
obj-$(CONFIG_THERMAL) += thermal/
|
|
obj-$(CONFIG_WATCHDOG) += watchdog/
|
|
obj-$(CONFIG_MD) += md/
|
|
obj-$(CONFIG_BT) += bluetooth/
|
|
obj-$(CONFIG_ACCESSIBILITY) += accessibility/
|
|
obj-$(CONFIG_ISDN) += isdn/
|
|
obj-$(CONFIG_EDAC) += edac/
|
|
obj-$(CONFIG_EISA) += eisa/
|
|
obj-$(CONFIG_PM_OPP) += opp/
|
|
obj-$(CONFIG_CPU_FREQ) += cpufreq/
|
|
obj-$(CONFIG_CPU_IDLE) += cpuidle/
|
|
obj-y += mmc/
|
|
obj-y += ufs/
|
|
obj-$(CONFIG_MEMSTICK) += memstick/
|
|
obj-$(CONFIG_NEW_LEDS) += leds/
|
|
obj-$(CONFIG_INFINIBAND) += infiniband/
|
|
obj-y += firmware/
|
|
obj-$(CONFIG_CRYPTO) += crypto/
|
|
obj-$(CONFIG_SUPERH) += sh/
|
|
obj-y += clocksource/
|
|
obj-$(CONFIG_DCA) += dca/
|
|
obj-$(CONFIG_HID) += hid/
|
|
obj-$(CONFIG_PPC_PS3) += ps3/
|
|
obj-$(CONFIG_OF) += of/
|
|
obj-$(CONFIG_SSB) += ssb/
|
|
obj-$(CONFIG_BCMA) += bcma/
|
|
obj-$(CONFIG_VHOST_RING) += vhost/
|
|
obj-$(CONFIG_VHOST_IOTLB) += vhost/
|
|
obj-$(CONFIG_VHOST) += vhost/
|
|
obj-$(CONFIG_VLYNQ) += vlynq/
|
|
obj-$(CONFIG_GREYBUS) += greybus/
|
|
obj-$(CONFIG_COMEDI) += comedi/
|
|
obj-$(CONFIG_STAGING) += staging/
|
|
obj-y += platform/
|
|
|
|
obj-$(CONFIG_MAILBOX) += mailbox/
|
|
obj-$(CONFIG_HWSPINLOCK) += hwspinlock/
|
|
obj-$(CONFIG_REMOTEPROC) += remoteproc/
|
|
obj-$(CONFIG_RPMSG) += rpmsg/
|
|
obj-$(CONFIG_SOUNDWIRE) += soundwire/
|
|
|
|
# Virtualization drivers
|
|
obj-$(CONFIG_VIRT_DRIVERS) += virt/
|
|
obj-$(subst m,y,$(CONFIG_HYPERV)) += hv/
|
|
|
|
obj-$(CONFIG_PM_DEVFREQ) += devfreq/
|
|
obj-$(CONFIG_EXTCON) += extcon/
|
|
obj-$(CONFIG_MEMORY) += memory/
|
|
obj-$(CONFIG_IIO) += iio/
|
|
obj-$(CONFIG_IPACK_BUS) += ipack/
|
|
obj-$(CONFIG_NTB) += ntb/
|
|
obj-$(CONFIG_POWERCAP) += powercap/
|
|
obj-$(CONFIG_MCB) += mcb/
|
|
obj-$(CONFIG_PERF_EVENTS) += perf/
|
|
obj-$(CONFIG_RAS) += ras/
|
|
obj-$(CONFIG_USB4) += thunderbolt/
|
|
obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/
|
|
obj-y += hwtracing/intel_th/
|
|
obj-$(CONFIG_STM) += hwtracing/stm/
|
|
obj-$(CONFIG_HISI_PTT) += hwtracing/ptt/
|
|
obj-y += android/
|
|
obj-$(CONFIG_NVMEM) += nvmem/
|
|
obj-$(CONFIG_FPGA) += fpga/
|
|
obj-$(CONFIG_FSI) += fsi/
|
|
obj-$(CONFIG_TEE) += tee/
|
|
obj-$(CONFIG_MULTIPLEXER) += mux/
|
|
obj-$(CONFIG_SIOX) += siox/
|
|
obj-$(CONFIG_GNSS) += gnss/
|
|
obj-$(CONFIG_INTERCONNECT) += interconnect/
|
|
obj-$(CONFIG_COUNTER) += counter/
|
|
obj-$(CONFIG_MOST) += most/
|
|
obj-$(CONFIG_PECI) += peci/
|
|
obj-$(CONFIG_HTE) += hte/
|