linux-stable/drivers/usb/host/xhci-plat.c
Sarah Sharp 5845c13a70 xhci: Step 1 to fix usb-linus and usb-next.
Hi Greg,
 
 This is the first of three steps to fix your usb-linus and usb-next
 trees.  As I mentioned, commit 4fae6f0fa8
 "USB: handle LPM errors during device suspend correctly" was incorrectly
 added to usb-next when it should have been added to usb-linus and marked
 for stable.
 
 Two port power off bug fixes touch the same code that patch touches, but
 it's not easy to simply move commit 4fae6f0f patch to usb-linus because
 commit 28e861658e "USB: refactor code for
 enabling/disabling remote wakeup" also touched those code sections.
 
 I propose a two step process to fix this:
 
 1. Pull these four patches into usb-linus.
 
 2. Revert commit 28e861658e from usb-next.
    Merge usb-linus into usb-next, and resolve the conflicts.
 
 I will be sending pull requests for these steps.
 
 This pull request is step one, and contains the backported version of
 commit 4fae6f0fa8, the two port power off
 fixes, and an unrelated xhci-plat bug fix.
 
 Sarah Sharp
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSDXUgAAoJEBMGWMLi1Gc5KrcP/jVYFI7CRS9sRWaBxtMdAbi7
 Ve0q7479ZmPA9o+SwGKVzO8cM8XJ6mb6CmNww6rByxneUFKvcnq0dwWBc31mZltP
 +zYzgOKk0GwAYZ644QvpcZfh8lh/ex52qdPb+RKZIfcsmKJzPJwHJSaYUh+LJrTC
 NxW4NqWYSMbroh3X0nsvM4bw/vEP2D8BhMjXrBDcDDC9gkj+YGE3eIeW08Hq47x1
 Hil6rA0/BERWvKP5SJdgWdRld6z5NzrOMdOea9LJtHTzrhi9Gyvc2hul4cvKfj4P
 VMUslkxw2x13oqeY0xp/uCZkIMYGmvHf50BOGjIoRW8JARe92Vh3mb6xE+ywu4LQ
 pHWDDH+ANUtrtNEF1/3xu+8mYNgg5prdhKRztkUlzJ/FTvNPjbYAN+t4p0s3O8bh
 VRo6iH9G0pydjVpo1YERX1S69noyUHsguXkrZnMPVMfMC7reOAb5mev56hcSjh9Y
 S24RYVHYhJNz9A4L8Y7yDu7Z1MorcIvviTI0xa0AS7n2r40vnEQJtQyP2GbK7KZH
 iHIUNh2E6GHyCsvDBMuYgIELJM0OswCiF+SKtMiGgwlbOcVvXMXcgNdCSuMJhuo9
 PjNT9bs6RsgSEqYemYruFkhomhPBJHPwTr8dy4YsThx2GOTm0AsZ0FCbVmNPqOvI
 1NYgwzvX3fr94iNt3xdg
 =0/wL
 -----END PGP SIGNATURE-----

Merge tag 'for-usb-2013-08-15-step-1' into for-usb-next

xhci: Step 1 to fix usb-linus and usb-next.

Hi Greg,

This is the first of three steps to fix your usb-linus and usb-next
trees.  As I mentioned, commit 4fae6f0fa8
"USB: handle LPM errors during device suspend correctly" was incorrectly
added to usb-next when it should have been added to usb-linus and marked
for stable.

Two port power off bug fixes touch the same code that patch touches, but
it's not easy to simply move commit 4fae6f0f patch to usb-linus because
commit 28e861658e "USB: refactor code for
enabling/disabling remote wakeup" also touched those code sections.

I propose a two step process to fix this:

1. Pull these four patches into usb-linus.

2. Revert commit 28e861658e from usb-next.
   Merge usb-linus into usb-next, and resolve the conflicts.

I will be sending pull requests for these steps.

This pull request is step one, and contains the backported version of
commit 4fae6f0fa8, the two port power off
fixes, and an unrelated xhci-plat bug fix.

Sarah Sharp

Resolved conflicts:
	drivers/usb/core/hub.c
2013-08-15 18:00:46 -07:00

252 lines
5.8 KiB
C

/*
* xhci-plat.c - xHCI host controller driver platform Bus Glue.
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
* Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* A lot of code borrowed from the Linux xHCI driver.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/dma-mapping.h>
#include "xhci.h"
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
/*
* As of now platform drivers don't provide MSI support so we ensure
* here that the generic code does not try to make a pci_dev from our
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT;
}
/* called during probe() after chip reset completes */
static int xhci_plat_setup(struct usb_hcd *hcd)
{
return xhci_gen_setup(hcd, xhci_plat_quirks);
}
static const struct hc_driver xhci_plat_xhci_driver = {
.description = "xhci-hcd",
.product_desc = "xHCI Host Controller",
.hcd_priv_size = sizeof(struct xhci_hcd *),
/*
* generic hardware linkage
*/
.irq = xhci_irq,
.flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED,
/*
* basic lifecycle operations
*/
.reset = xhci_plat_setup,
.start = xhci_run,
.stop = xhci_stop,
.shutdown = xhci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = xhci_urb_enqueue,
.urb_dequeue = xhci_urb_dequeue,
.alloc_dev = xhci_alloc_dev,
.free_dev = xhci_free_dev,
.alloc_streams = xhci_alloc_streams,
.free_streams = xhci_free_streams,
.add_endpoint = xhci_add_endpoint,
.drop_endpoint = xhci_drop_endpoint,
.endpoint_reset = xhci_endpoint_reset,
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,
.address_device = xhci_address_device,
.update_hub_device = xhci_update_hub_device,
.reset_device = xhci_discover_or_reset_device,
/*
* scheduling support
*/
.get_frame_number = xhci_get_frame,
/* Root hub support */
.hub_control = xhci_hub_control,
.hub_status_data = xhci_hub_status_data,
.bus_suspend = xhci_bus_suspend,
.bus_resume = xhci_bus_resume,
};
static int xhci_plat_probe(struct platform_device *pdev)
{
const struct hc_driver *driver;
struct xhci_hcd *xhci;
struct resource *res;
struct usb_hcd *hcd;
int ret;
int irq;
if (usb_disabled())
return -ENODEV;
driver = &xhci_plat_xhci_driver;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return -ENODEV;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
/* Initialize dma_mask and coherent_dma_mask to 32-bits */
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret)
return ret;
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
else
dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
dev_dbg(&pdev->dev, "controller already in use\n");
ret = -EBUSY;
goto put_hcd;
}
hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_dbg(&pdev->dev, "error mapping memory\n");
ret = -EFAULT;
goto release_mem_region;
}
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto unmap_registers;
/* USB 2.0 roothub is stored in the platform_device now. */
hcd = platform_get_drvdata(pdev);
xhci = hcd_to_xhci(hcd);
xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
dev_name(&pdev->dev), hcd);
if (!xhci->shared_hcd) {
ret = -ENOMEM;
goto dealloc_usb2_hcd;
}
/*
* Set the xHCI pointer before xhci_plat_setup() (aka hcd_driver.reset)
* is called by usb_add_hcd().
*/
*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
goto put_usb3_hcd;
return 0;
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);
dealloc_usb2_hcd:
usb_remove_hcd(hcd);
unmap_registers:
iounmap(hcd->regs);
release_mem_region:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
put_hcd:
usb_put_hcd(hcd);
return ret;
}
static int xhci_plat_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
usb_remove_hcd(xhci->shared_hcd);
usb_put_hcd(xhci->shared_hcd);
usb_remove_hcd(hcd);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
kfree(xhci);
return 0;
}
#ifdef CONFIG_PM
static int xhci_plat_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
return xhci_suspend(xhci);
}
static int xhci_plat_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
return xhci_resume(xhci, 0);
}
static const struct dev_pm_ops xhci_plat_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
};
#define DEV_PM_OPS (&xhci_plat_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif /* CONFIG_PM */
#ifdef CONFIG_OF
static const struct of_device_id usb_xhci_of_match[] = {
{ .compatible = "xhci-platform" },
{ },
};
MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
#endif
static struct platform_driver usb_xhci_driver = {
.probe = xhci_plat_probe,
.remove = xhci_plat_remove,
.driver = {
.name = "xhci-hcd",
.pm = DEV_PM_OPS,
.of_match_table = of_match_ptr(usb_xhci_of_match),
},
};
MODULE_ALIAS("platform:xhci-hcd");
int xhci_register_plat(void)
{
return platform_driver_register(&usb_xhci_driver);
}
void xhci_unregister_plat(void)
{
platform_driver_unregister(&usb_xhci_driver);
}