mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-14 06:35:12 +00:00
86bc917d2a
With CONFIG_OF_ALL_DTBS=y, as set by eg. allmodconfig, we see lots of warnings about our dts files, such as: arch/powerpc/boot/dts/glacier.dts:492.26-532.5: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie" The node name should not particularly matter, it's just a name, and AFAICS there's no kernel code that cares whether nodes are *named* "pciex" or "pcie". So shutup these warnings by converting to the name dtc wants. As always there's some risk this could break something obscure that does rely on the name, in which case we can revert. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200623130320.405852-1-mpe@ellerman.id.au
395 lines
9.7 KiB
Text
395 lines
9.7 KiB
Text
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Device Tree for Bluestone (APM821xx) board.
|
|
*
|
|
* Copyright (c) 2010, Applied Micro Circuits Corporation
|
|
* Author: Tirumala R Marri <tmarri@apm.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
model = "apm,bluestone";
|
|
compatible = "apm,bluestone";
|
|
dcr-parent = <&{/cpus/cpu@0}>;
|
|
|
|
aliases {
|
|
ethernet0 = &EMAC0;
|
|
serial0 = &UART0;
|
|
serial1 = &UART1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
model = "PowerPC,apm821xx";
|
|
reg = <0x00000000>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
timebase-frequency = <0>; /* Filled in by U-Boot */
|
|
i-cache-line-size = <32>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-size = <32768>;
|
|
d-cache-size = <32768>;
|
|
dcr-controller;
|
|
dcr-access-method = "native";
|
|
next-level-cache = <&L2C0>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
|
|
};
|
|
|
|
UIC0: interrupt-controller0 {
|
|
compatible = "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <0>;
|
|
dcr-reg = <0x0c0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
UIC1: interrupt-controller1 {
|
|
compatible = "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <1>;
|
|
dcr-reg = <0x0d0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
UIC2: interrupt-controller2 {
|
|
compatible = "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <2>;
|
|
dcr-reg = <0x0e0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
UIC3: interrupt-controller3 {
|
|
compatible = "ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <3>;
|
|
dcr-reg = <0x0f0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
OCM: ocm@400040000 {
|
|
compatible = "ibm,ocm";
|
|
status = "okay";
|
|
cell-index = <1>;
|
|
/* configured in U-Boot */
|
|
reg = <4 0x00040000 0x8000>; /* 32K */
|
|
};
|
|
|
|
SDR0: sdr {
|
|
compatible = "ibm,sdr-apm821xx";
|
|
dcr-reg = <0x00e 0x002>;
|
|
};
|
|
|
|
CPR0: cpr {
|
|
compatible = "ibm,cpr-apm821xx";
|
|
dcr-reg = <0x00c 0x002>;
|
|
};
|
|
|
|
L2C0: l2c {
|
|
compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
|
|
dcr-reg = <0x020 0x008
|
|
0x030 0x008>;
|
|
cache-line-size = <32>;
|
|
cache-size = <262144>;
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <11 1>;
|
|
};
|
|
|
|
plb {
|
|
compatible = "ibm,plb4";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
|
|
SDRAM0: sdram {
|
|
compatible = "ibm,sdram-apm821xx";
|
|
dcr-reg = <0x010 0x002>;
|
|
};
|
|
|
|
MAL0: mcmal {
|
|
compatible = "ibm,mcmal2";
|
|
descriptor-memory = "ocm";
|
|
dcr-reg = <0x180 0x062>;
|
|
num-tx-chans = <1>;
|
|
num-rx-chans = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&UIC2>;
|
|
interrupts = < /*TXEOB*/ 0x6 0x4
|
|
/*RXEOB*/ 0x7 0x4
|
|
/*SERR*/ 0x3 0x4
|
|
/*TXDE*/ 0x4 0x4
|
|
/*RXDE*/ 0x5 0x4>;
|
|
};
|
|
|
|
POB0: opb {
|
|
compatible = "ibm,opb";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
|
|
EBC0: ebc {
|
|
compatible = "ibm,ebc";
|
|
dcr-reg = <0x012 0x002>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
/* ranges property is supplied by U-Boot */
|
|
ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
|
|
interrupts = <0x6 0x4>;
|
|
interrupt-parent = <&UIC1>;
|
|
|
|
nor_flash@0,0 {
|
|
compatible = "amd,s29gl512n", "cfi-flash";
|
|
bank-width = <2>;
|
|
reg = <0x00000000 0x00000000 0x00400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
partition@0 {
|
|
label = "kernel";
|
|
reg = <0x00000000 0x00180000>;
|
|
};
|
|
partition@180000 {
|
|
label = "env";
|
|
reg = <0x00180000 0x00020000>;
|
|
};
|
|
partition@1a0000 {
|
|
label = "u-boot";
|
|
reg = <0x001a0000 0x00060000>;
|
|
};
|
|
};
|
|
|
|
ndfc@1,0 {
|
|
compatible = "ibm,ndfc";
|
|
reg = <0x00000003 0x00000000 0x00002000>;
|
|
ccr = <0x00001000>;
|
|
bank-settings = <0x80002222>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/* 2Gb Nand Flash */
|
|
nand {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "firmware";
|
|
reg = <0x00000000 0x00C00000>;
|
|
};
|
|
partition@c00000 {
|
|
label = "environment";
|
|
reg = <0x00C00000 0x00B00000>;
|
|
};
|
|
partition@1700000 {
|
|
label = "kernel";
|
|
reg = <0x01700000 0x00E00000>;
|
|
};
|
|
partition@2500000 {
|
|
label = "root";
|
|
reg = <0x02500000 0x08200000>;
|
|
};
|
|
partition@a700000 {
|
|
label = "device-tree";
|
|
reg = <0x0A700000 0x00B00000>;
|
|
};
|
|
partition@b200000 {
|
|
label = "config";
|
|
reg = <0x0B200000 0x00D00000>;
|
|
};
|
|
partition@bf00000 {
|
|
label = "diag";
|
|
reg = <0x0BF00000 0x00C00000>;
|
|
};
|
|
partition@cb00000 {
|
|
label = "vendor";
|
|
reg = <0x0CB00000 0x3500000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
UART0: serial@ef600300 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0xef600300 0x00000008>;
|
|
virtual-reg = <0xef600300>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
current-speed = <0>; /* Filled in by U-Boot */
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <0x1 0x4>;
|
|
};
|
|
|
|
UART1: serial@ef600400 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0xef600400 0x00000008>;
|
|
virtual-reg = <0xef600400>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
current-speed = <0>; /* Filled in by U-Boot */
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x1 0x4>;
|
|
};
|
|
|
|
IIC0: i2c@ef600700 {
|
|
compatible = "ibm,iic";
|
|
reg = <0xef600700 0x00000014>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x2 0x4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
rtc@68 {
|
|
compatible = "st,m41t80";
|
|
reg = <0x68>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x9 0x8>;
|
|
};
|
|
sttm@4C {
|
|
compatible = "adm,adm1032";
|
|
reg = <0x4C>;
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */
|
|
};
|
|
};
|
|
|
|
IIC1: i2c@ef600800 {
|
|
compatible = "ibm,iic";
|
|
reg = <0xef600800 0x00000014>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x3 0x4>;
|
|
};
|
|
|
|
RGMII0: emac-rgmii@ef601500 {
|
|
compatible = "ibm,rgmii";
|
|
reg = <0xef601500 0x00000008>;
|
|
has-mdio;
|
|
};
|
|
|
|
TAH0: emac-tah@ef601350 {
|
|
compatible = "ibm,tah";
|
|
reg = <0xef601350 0x00000030>;
|
|
};
|
|
|
|
EMAC0: ethernet@ef600c00 {
|
|
device_type = "network";
|
|
compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
|
|
interrupt-parent = <&EMAC0>;
|
|
interrupts = <0x0 0x1>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
|
|
/*Wake*/ 0x1 &UIC2 0x14 0x4>;
|
|
reg = <0xef600c00 0x000000c4>;
|
|
local-mac-address = [000000000000]; /* Filled in by U-Boot */
|
|
mal-device = <&MAL0>;
|
|
mal-tx-channel = <0>;
|
|
mal-rx-channel = <0>;
|
|
cell-index = <0>;
|
|
max-frame-size = <9000>;
|
|
rx-fifo-size = <16384>;
|
|
tx-fifo-size = <2048>;
|
|
phy-mode = "rgmii";
|
|
phy-map = <0x00000000>;
|
|
rgmii-device = <&RGMII0>;
|
|
rgmii-channel = <0>;
|
|
tah-device = <&TAH0>;
|
|
tah-channel = <0>;
|
|
has-inverted-stacr-oc;
|
|
has-new-stacr-staopc;
|
|
};
|
|
};
|
|
|
|
PCIE0: pcie@d00000000 {
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
|
|
primary;
|
|
port = <0x0>; /* port number */
|
|
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
|
|
0x0000000c 0x08010000 0x00001000>; /* Registers */
|
|
dcr-reg = <0x100 0x020>;
|
|
sdr-base = <0x300>;
|
|
|
|
/* Outbound ranges, one memory and one IO,
|
|
* later cannot be changed
|
|
*/
|
|
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
|
|
0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
|
|
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
|
|
|
|
/* Inbound 2GB range starting at 0 */
|
|
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
|
|
|
|
/* This drives busses 40 to 0x7f */
|
|
bus-range = <0x40 0x7f>;
|
|
|
|
/* Legacy interrupts (note the weird polarity, the bridge seems
|
|
* to invert PCIe legacy interrupts).
|
|
* We are de-swizzling here because the numbers are actually for
|
|
* port of the root complex virtual P2P bridge. But I want
|
|
* to avoid putting a node for it in the tree, so the numbers
|
|
* below are basically de-swizzled numbers.
|
|
* The real slot is on idsel 0, so the swizzling is 1:1
|
|
*/
|
|
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
|
|
0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
|
|
0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
|
|
0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
|
|
};
|
|
|
|
MSI: ppc4xx-msi@C10000000 {
|
|
compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
|
|
reg = < 0xC 0x10000000 0x100
|
|
0xC 0x10000000 0x100>;
|
|
sdr-base = <0x36C>;
|
|
msi-data = <0x00004440>;
|
|
msi-mask = <0x0000ffe0>;
|
|
interrupts =<0 1 2 3 4 5 6 7>;
|
|
interrupt-parent = <&MSI>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
msi-available-ranges = <0x0 0x100>;
|
|
interrupt-map = <
|
|
0 &UIC3 0x18 1
|
|
1 &UIC3 0x19 1
|
|
2 &UIC3 0x1A 1
|
|
3 &UIC3 0x1B 1
|
|
4 &UIC3 0x1C 1
|
|
5 &UIC3 0x1D 1
|
|
6 &UIC3 0x1E 1
|
|
7 &UIC3 0x1F 1
|
|
>;
|
|
};
|
|
};
|
|
};
|