linux-stable/arch/powerpc/platforms/4xx/soc.c
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00

217 lines
5.7 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* IBM/AMCC PPC4xx SoC setup code
*
* Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
* Copyright (c) 2003 - 2006 Zultys Technologies
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/dcr.h>
#include <asm/dcr-regs.h>
#include <asm/reg.h>
static u32 dcrbase_l2c;
/*
* L2-cache
*/
/* Issue L2C diagnostic command */
static inline u32 l2c_diag(u32 addr)
{
mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
;
return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
}
static irqreturn_t l2c_error_handler(int irq, void *dev)
{
u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
if (sr & L2C_SR_CPE) {
/* Read cache trapped address */
u32 addr = l2c_diag(0x42000000);
printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
addr);
}
if (sr & L2C_SR_TPE) {
/* Read tag trapped address */
u32 addr = l2c_diag(0x82000000) >> 16;
printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
addr);
}
/* Clear parity errors */
if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
} else {
printk(KERN_EMERG "L2C: LRU error\n");
}
return IRQ_HANDLED;
}
static int __init ppc4xx_l2c_probe(void)
{
struct device_node *np;
u32 r;
unsigned long flags;
int irq;
const u32 *dcrreg;
u32 dcrbase_isram;
int len;
const u32 *prop;
u32 l2_size;
np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
if (!np)
return 0;
/* Get l2 cache size */
prop = of_get_property(np, "cache-size", NULL);
if (prop == NULL) {
printk(KERN_ERR "%pOF: Can't get cache-size!\n", np);
of_node_put(np);
return -ENODEV;
}
l2_size = prop[0];
/* Map DCRs */
dcrreg = of_get_property(np, "dcr-reg", &len);
if (!dcrreg || (len != 4 * sizeof(u32))) {
printk(KERN_ERR "%pOF: Can't get DCR register base !", np);
of_node_put(np);
return -ENODEV;
}
dcrbase_isram = dcrreg[0];
dcrbase_l2c = dcrreg[2];
/* Get and map irq number from device tree */
irq = irq_of_parse_and_map(np, 0);
if (!irq) {
printk(KERN_ERR "irq_of_parse_and_map failed\n");
of_node_put(np);
return -ENODEV;
}
/* Install error handler */
if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) {
printk(KERN_ERR "Cannot install L2C error handler"
", cache is not enabled\n");
of_node_put(np);
return -ENODEV;
}
local_irq_save(flags);
asm volatile ("sync" ::: "memory");
/* Disable SRAM */
mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
/* Enable L2_MODE without ICU/DCU */
r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
r |= L2C_CFG_L2M | L2C_CFG_SS_256;
mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
/* Hardware Clear Command */
mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
;
/* Clear Cache Parity and Tag Errors */
mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
/* Enable 64G snoop region starting at 0 */
r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
asm volatile ("sync" ::: "memory");
/* Enable ICU/DCU ports */
r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
| L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
/* Check for 460EX/GT special handling */
if (of_device_is_compatible(np, "ibm,l2-cache-460ex") ||
of_device_is_compatible(np, "ibm,l2-cache-460gt"))
r |= L2C_CFG_RDBW;
mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
asm volatile ("sync; isync" ::: "memory");
local_irq_restore(flags);
printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
of_node_put(np);
return 0;
}
arch_initcall(ppc4xx_l2c_probe);
/*
* Apply a system reset. Alternatively a board specific value may be
* provided via the "reset-type" property in the cpu node.
*/
void ppc4xx_reset_system(char *cmd)
{
struct device_node *np;
u32 reset_type = DBCR0_RST_SYSTEM;
const u32 *prop;
np = of_get_cpu_node(0, NULL);
if (np) {
prop = of_get_property(np, "reset-type", NULL);
/*
* Check if property exists and if it is in range:
* 1 - PPC4xx core reset
* 2 - PPC4xx chip reset
* 3 - PPC4xx system reset (default)
*/
if ((prop) && ((prop[0] >= 1) && (prop[0] <= 3)))
reset_type = prop[0] << 28;
}
mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | reset_type);
while (1)
; /* Just in case the reset doesn't work */
}