mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-06 02:50:43 +00:00
![Clemens Ladisch](/assets/img/avatar_default.png)
On systems where the temperature sensor is actually used, the BIOS is likely to have locked the alarm registers. In that case, all writes through the corresponding sysfs files would be silently ignored. To prevent this, detect the locks and make the affected sysfs files read-only. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
618 lines
16 KiB
C
618 lines
16 KiB
C
/*
|
|
* jc42.c - driver for Jedec JC42.4 compliant temperature sensors
|
|
*
|
|
* Copyright (c) 2010 Ericsson AB.
|
|
*
|
|
* Derived from lm77.c by Andras BALI <drewie@freemail.hu>.
|
|
*
|
|
* JC42.4 compliant temperature sensors are typically used on memory modules.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = {
|
|
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, I2C_CLIENT_END };
|
|
|
|
/* JC42 registers. All registers are 16 bit. */
|
|
#define JC42_REG_CAP 0x00
|
|
#define JC42_REG_CONFIG 0x01
|
|
#define JC42_REG_TEMP_UPPER 0x02
|
|
#define JC42_REG_TEMP_LOWER 0x03
|
|
#define JC42_REG_TEMP_CRITICAL 0x04
|
|
#define JC42_REG_TEMP 0x05
|
|
#define JC42_REG_MANID 0x06
|
|
#define JC42_REG_DEVICEID 0x07
|
|
|
|
/* Status bits in temperature register */
|
|
#define JC42_ALARM_CRIT_BIT 15
|
|
#define JC42_ALARM_MAX_BIT 14
|
|
#define JC42_ALARM_MIN_BIT 13
|
|
|
|
/* Configuration register defines */
|
|
#define JC42_CFG_CRIT_ONLY (1 << 2)
|
|
#define JC42_CFG_TCRIT_LOCK (1 << 6)
|
|
#define JC42_CFG_EVENT_LOCK (1 << 7)
|
|
#define JC42_CFG_SHUTDOWN (1 << 8)
|
|
#define JC42_CFG_HYST_SHIFT 9
|
|
#define JC42_CFG_HYST_MASK 0x03
|
|
|
|
/* Capabilities */
|
|
#define JC42_CAP_RANGE (1 << 2)
|
|
|
|
/* Manufacturer IDs */
|
|
#define ADT_MANID 0x11d4 /* Analog Devices */
|
|
#define MAX_MANID 0x004d /* Maxim */
|
|
#define IDT_MANID 0x00b3 /* IDT */
|
|
#define MCP_MANID 0x0054 /* Microchip */
|
|
#define NXP_MANID 0x1131 /* NXP Semiconductors */
|
|
#define ONS_MANID 0x1b09 /* ON Semiconductor */
|
|
#define STM_MANID 0x104a /* ST Microelectronics */
|
|
|
|
/* Supported chips */
|
|
|
|
/* Analog Devices */
|
|
#define ADT7408_DEVID 0x0801
|
|
#define ADT7408_DEVID_MASK 0xffff
|
|
|
|
/* IDT */
|
|
#define TS3000B3_DEVID 0x2903 /* Also matches TSE2002B3 */
|
|
#define TS3000B3_DEVID_MASK 0xffff
|
|
|
|
/* Maxim */
|
|
#define MAX6604_DEVID 0x3e00
|
|
#define MAX6604_DEVID_MASK 0xffff
|
|
|
|
/* Microchip */
|
|
#define MCP98242_DEVID 0x2000
|
|
#define MCP98242_DEVID_MASK 0xfffc
|
|
|
|
#define MCP98243_DEVID 0x2100
|
|
#define MCP98243_DEVID_MASK 0xfffc
|
|
|
|
#define MCP9843_DEVID 0x0000 /* Also matches mcp9805 */
|
|
#define MCP9843_DEVID_MASK 0xfffe
|
|
|
|
/* NXP */
|
|
#define SE97_DEVID 0xa200
|
|
#define SE97_DEVID_MASK 0xfffc
|
|
|
|
#define SE98_DEVID 0xa100
|
|
#define SE98_DEVID_MASK 0xfffc
|
|
|
|
/* ON Semiconductor */
|
|
#define CAT6095_DEVID 0x0800 /* Also matches CAT34TS02 */
|
|
#define CAT6095_DEVID_MASK 0xffe0
|
|
|
|
/* ST Microelectronics */
|
|
#define STTS424_DEVID 0x0101
|
|
#define STTS424_DEVID_MASK 0xffff
|
|
|
|
#define STTS424E_DEVID 0x0000
|
|
#define STTS424E_DEVID_MASK 0xfffe
|
|
|
|
static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
|
|
|
|
struct jc42_chips {
|
|
u16 manid;
|
|
u16 devid;
|
|
u16 devid_mask;
|
|
};
|
|
|
|
static struct jc42_chips jc42_chips[] = {
|
|
{ ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
|
|
{ IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK },
|
|
{ MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
|
|
{ MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
|
|
{ MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
|
|
{ MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
|
|
{ NXP_MANID, SE97_DEVID, SE97_DEVID_MASK },
|
|
{ ONS_MANID, CAT6095_DEVID, CAT6095_DEVID_MASK },
|
|
{ NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
|
|
{ STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
|
|
{ STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
|
|
};
|
|
|
|
/* Each client has this additional data */
|
|
struct jc42_data {
|
|
struct device *hwmon_dev;
|
|
struct mutex update_lock; /* protect register access */
|
|
bool extended; /* true if extended range supported */
|
|
bool valid;
|
|
unsigned long last_updated; /* In jiffies */
|
|
u16 orig_config; /* original configuration */
|
|
u16 config; /* current configuration */
|
|
u16 temp_input; /* Temperatures */
|
|
u16 temp_crit;
|
|
u16 temp_min;
|
|
u16 temp_max;
|
|
};
|
|
|
|
static int jc42_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id);
|
|
static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info);
|
|
static int jc42_remove(struct i2c_client *client);
|
|
static int jc42_read_value(struct i2c_client *client, u8 reg);
|
|
static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value);
|
|
|
|
static struct jc42_data *jc42_update_device(struct device *dev);
|
|
|
|
static const struct i2c_device_id jc42_id[] = {
|
|
{ "adt7408", 0 },
|
|
{ "cat94ts02", 0 },
|
|
{ "cat6095", 0 },
|
|
{ "jc42", 0 },
|
|
{ "max6604", 0 },
|
|
{ "mcp9805", 0 },
|
|
{ "mcp98242", 0 },
|
|
{ "mcp98243", 0 },
|
|
{ "mcp9843", 0 },
|
|
{ "se97", 0 },
|
|
{ "se97b", 0 },
|
|
{ "se98", 0 },
|
|
{ "stts424", 0 },
|
|
{ "tse2002b3", 0 },
|
|
{ "ts3000b3", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, jc42_id);
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int jc42_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct jc42_data *data = i2c_get_clientdata(client);
|
|
|
|
data->config |= JC42_CFG_SHUTDOWN;
|
|
jc42_write_value(client, JC42_REG_CONFIG, data->config);
|
|
return 0;
|
|
}
|
|
|
|
static int jc42_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct jc42_data *data = i2c_get_clientdata(client);
|
|
|
|
data->config &= ~JC42_CFG_SHUTDOWN;
|
|
jc42_write_value(client, JC42_REG_CONFIG, data->config);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops jc42_dev_pm_ops = {
|
|
.suspend = jc42_suspend,
|
|
.resume = jc42_resume,
|
|
};
|
|
|
|
#define JC42_DEV_PM_OPS (&jc42_dev_pm_ops)
|
|
#else
|
|
#define JC42_DEV_PM_OPS NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
/* This is the driver that will be inserted */
|
|
static struct i2c_driver jc42_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "jc42",
|
|
.pm = JC42_DEV_PM_OPS,
|
|
},
|
|
.probe = jc42_probe,
|
|
.remove = jc42_remove,
|
|
.id_table = jc42_id,
|
|
.detect = jc42_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
#define JC42_TEMP_MIN_EXTENDED (-40000)
|
|
#define JC42_TEMP_MIN 0
|
|
#define JC42_TEMP_MAX 125000
|
|
|
|
static u16 jc42_temp_to_reg(int temp, bool extended)
|
|
{
|
|
int ntemp = SENSORS_LIMIT(temp,
|
|
extended ? JC42_TEMP_MIN_EXTENDED :
|
|
JC42_TEMP_MIN, JC42_TEMP_MAX);
|
|
|
|
/* convert from 0.001 to 0.0625 resolution */
|
|
return (ntemp * 2 / 125) & 0x1fff;
|
|
}
|
|
|
|
static int jc42_temp_from_reg(s16 reg)
|
|
{
|
|
reg &= 0x1fff;
|
|
|
|
/* sign extend register */
|
|
if (reg & 0x1000)
|
|
reg |= 0xf000;
|
|
|
|
/* convert from 0.0625 to 0.001 resolution */
|
|
return reg * 125 / 2;
|
|
}
|
|
|
|
/* sysfs stuff */
|
|
|
|
/* read routines for temperature limits */
|
|
#define show(value) \
|
|
static ssize_t show_##value(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
char *buf) \
|
|
{ \
|
|
struct jc42_data *data = jc42_update_device(dev); \
|
|
if (IS_ERR(data)) \
|
|
return PTR_ERR(data); \
|
|
return sprintf(buf, "%d\n", jc42_temp_from_reg(data->value)); \
|
|
}
|
|
|
|
show(temp_input);
|
|
show(temp_crit);
|
|
show(temp_min);
|
|
show(temp_max);
|
|
|
|
/* read routines for hysteresis values */
|
|
static ssize_t show_temp_crit_hyst(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct jc42_data *data = jc42_update_device(dev);
|
|
int temp, hyst;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
temp = jc42_temp_from_reg(data->temp_crit);
|
|
hyst = jc42_hysteresis[(data->config >> JC42_CFG_HYST_SHIFT)
|
|
& JC42_CFG_HYST_MASK];
|
|
return sprintf(buf, "%d\n", temp - hyst);
|
|
}
|
|
|
|
static ssize_t show_temp_max_hyst(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct jc42_data *data = jc42_update_device(dev);
|
|
int temp, hyst;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
temp = jc42_temp_from_reg(data->temp_max);
|
|
hyst = jc42_hysteresis[(data->config >> JC42_CFG_HYST_SHIFT)
|
|
& JC42_CFG_HYST_MASK];
|
|
return sprintf(buf, "%d\n", temp - hyst);
|
|
}
|
|
|
|
/* write routines */
|
|
#define set(value, reg) \
|
|
static ssize_t set_##value(struct device *dev, \
|
|
struct device_attribute *attr, \
|
|
const char *buf, size_t count) \
|
|
{ \
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
struct jc42_data *data = i2c_get_clientdata(client); \
|
|
int err, ret = count; \
|
|
long val; \
|
|
if (strict_strtol(buf, 10, &val) < 0) \
|
|
return -EINVAL; \
|
|
mutex_lock(&data->update_lock); \
|
|
data->value = jc42_temp_to_reg(val, data->extended); \
|
|
err = jc42_write_value(client, reg, data->value); \
|
|
if (err < 0) \
|
|
ret = err; \
|
|
mutex_unlock(&data->update_lock); \
|
|
return ret; \
|
|
}
|
|
|
|
set(temp_min, JC42_REG_TEMP_LOWER);
|
|
set(temp_max, JC42_REG_TEMP_UPPER);
|
|
set(temp_crit, JC42_REG_TEMP_CRITICAL);
|
|
|
|
/* JC42.4 compliant chips only support four hysteresis values.
|
|
* Pick best choice and go from there. */
|
|
static ssize_t set_temp_crit_hyst(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct jc42_data *data = i2c_get_clientdata(client);
|
|
unsigned long val;
|
|
int diff, hyst;
|
|
int err;
|
|
int ret = count;
|
|
|
|
if (strict_strtoul(buf, 10, &val) < 0)
|
|
return -EINVAL;
|
|
|
|
diff = jc42_temp_from_reg(data->temp_crit) - val;
|
|
hyst = 0;
|
|
if (diff > 0) {
|
|
if (diff < 2250)
|
|
hyst = 1; /* 1.5 degrees C */
|
|
else if (diff < 4500)
|
|
hyst = 2; /* 3.0 degrees C */
|
|
else
|
|
hyst = 3; /* 6.0 degrees C */
|
|
}
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->config = (data->config
|
|
& ~(JC42_CFG_HYST_MASK << JC42_CFG_HYST_SHIFT))
|
|
| (hyst << JC42_CFG_HYST_SHIFT);
|
|
err = jc42_write_value(client, JC42_REG_CONFIG, data->config);
|
|
if (err < 0)
|
|
ret = err;
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t show_alarm(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
u16 bit = to_sensor_dev_attr(attr)->index;
|
|
struct jc42_data *data = jc42_update_device(dev);
|
|
u16 val;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
val = data->temp_input;
|
|
if (bit != JC42_ALARM_CRIT_BIT && (data->config & JC42_CFG_CRIT_ONLY))
|
|
val = 0;
|
|
return sprintf(buf, "%u\n", (val >> bit) & 1);
|
|
}
|
|
|
|
static DEVICE_ATTR(temp1_input, S_IRUGO,
|
|
show_temp_input, NULL);
|
|
static DEVICE_ATTR(temp1_crit, S_IRUGO,
|
|
show_temp_crit, set_temp_crit);
|
|
static DEVICE_ATTR(temp1_min, S_IRUGO,
|
|
show_temp_min, set_temp_min);
|
|
static DEVICE_ATTR(temp1_max, S_IRUGO,
|
|
show_temp_max, set_temp_max);
|
|
|
|
static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
|
|
show_temp_crit_hyst, set_temp_crit_hyst);
|
|
static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
|
|
show_temp_max_hyst, NULL);
|
|
|
|
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL,
|
|
JC42_ALARM_CRIT_BIT);
|
|
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
|
|
JC42_ALARM_MIN_BIT);
|
|
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
|
|
JC42_ALARM_MAX_BIT);
|
|
|
|
static struct attribute *jc42_attributes[] = {
|
|
&dev_attr_temp1_input.attr,
|
|
&dev_attr_temp1_crit.attr,
|
|
&dev_attr_temp1_min.attr,
|
|
&dev_attr_temp1_max.attr,
|
|
&dev_attr_temp1_crit_hyst.attr,
|
|
&dev_attr_temp1_max_hyst.attr,
|
|
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static mode_t jc42_attribute_mode(struct kobject *kobj,
|
|
struct attribute *attr, int index)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct jc42_data *data = i2c_get_clientdata(client);
|
|
unsigned int config = data->config;
|
|
bool readonly;
|
|
|
|
if (attr == &dev_attr_temp1_crit.attr)
|
|
readonly = config & JC42_CFG_TCRIT_LOCK;
|
|
else if (attr == &dev_attr_temp1_min.attr ||
|
|
attr == &dev_attr_temp1_max.attr)
|
|
readonly = config & JC42_CFG_EVENT_LOCK;
|
|
else if (attr == &dev_attr_temp1_crit_hyst.attr)
|
|
readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
|
|
else
|
|
readonly = true;
|
|
|
|
return S_IRUGO | (readonly ? 0 : S_IWUSR);
|
|
}
|
|
|
|
static const struct attribute_group jc42_group = {
|
|
.attrs = jc42_attributes,
|
|
.is_visible = jc42_attribute_mode,
|
|
};
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int jc42_detect(struct i2c_client *new_client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = new_client->adapter;
|
|
int i, config, cap, manid, devid;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
cap = jc42_read_value(new_client, JC42_REG_CAP);
|
|
config = jc42_read_value(new_client, JC42_REG_CONFIG);
|
|
manid = jc42_read_value(new_client, JC42_REG_MANID);
|
|
devid = jc42_read_value(new_client, JC42_REG_DEVICEID);
|
|
|
|
if (cap < 0 || config < 0 || manid < 0 || devid < 0)
|
|
return -ENODEV;
|
|
|
|
if ((cap & 0xff00) || (config & 0xf800))
|
|
return -ENODEV;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(jc42_chips); i++) {
|
|
struct jc42_chips *chip = &jc42_chips[i];
|
|
if (manid == chip->manid &&
|
|
(devid & chip->devid_mask) == chip->devid) {
|
|
strlcpy(info->type, "jc42", I2C_NAME_SIZE);
|
|
return 0;
|
|
}
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int jc42_probe(struct i2c_client *new_client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct jc42_data *data;
|
|
int config, cap, err;
|
|
|
|
data = kzalloc(sizeof(struct jc42_data), GFP_KERNEL);
|
|
if (!data) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
i2c_set_clientdata(new_client, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
cap = jc42_read_value(new_client, JC42_REG_CAP);
|
|
if (cap < 0) {
|
|
err = -EINVAL;
|
|
goto exit_free;
|
|
}
|
|
data->extended = !!(cap & JC42_CAP_RANGE);
|
|
|
|
config = jc42_read_value(new_client, JC42_REG_CONFIG);
|
|
if (config < 0) {
|
|
err = -EINVAL;
|
|
goto exit_free;
|
|
}
|
|
data->orig_config = config;
|
|
if (config & JC42_CFG_SHUTDOWN) {
|
|
config &= ~JC42_CFG_SHUTDOWN;
|
|
jc42_write_value(new_client, JC42_REG_CONFIG, config);
|
|
}
|
|
data->config = config;
|
|
|
|
/* Register sysfs hooks */
|
|
err = sysfs_create_group(&new_client->dev.kobj, &jc42_group);
|
|
if (err)
|
|
goto exit_free;
|
|
|
|
data->hwmon_dev = hwmon_device_register(&new_client->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove:
|
|
sysfs_remove_group(&new_client->dev.kobj, &jc42_group);
|
|
exit_free:
|
|
kfree(data);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int jc42_remove(struct i2c_client *client)
|
|
{
|
|
struct jc42_data *data = i2c_get_clientdata(client);
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
sysfs_remove_group(&client->dev.kobj, &jc42_group);
|
|
if (data->config != data->orig_config)
|
|
jc42_write_value(client, JC42_REG_CONFIG, data->orig_config);
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
/* All registers are word-sized. */
|
|
static int jc42_read_value(struct i2c_client *client, u8 reg)
|
|
{
|
|
int ret = i2c_smbus_read_word_data(client, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
return swab16(ret);
|
|
}
|
|
|
|
static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value)
|
|
{
|
|
return i2c_smbus_write_word_data(client, reg, swab16(value));
|
|
}
|
|
|
|
static struct jc42_data *jc42_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct jc42_data *data = i2c_get_clientdata(client);
|
|
struct jc42_data *ret = data;
|
|
int val;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
|
|
val = jc42_read_value(client, JC42_REG_TEMP);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
data->temp_input = val;
|
|
|
|
val = jc42_read_value(client, JC42_REG_TEMP_CRITICAL);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
data->temp_crit = val;
|
|
|
|
val = jc42_read_value(client, JC42_REG_TEMP_LOWER);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
data->temp_min = val;
|
|
|
|
val = jc42_read_value(client, JC42_REG_TEMP_UPPER);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
data->temp_max = val;
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = true;
|
|
}
|
|
abort:
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int __init sensors_jc42_init(void)
|
|
{
|
|
return i2c_add_driver(&jc42_driver);
|
|
}
|
|
|
|
static void __exit sensors_jc42_exit(void)
|
|
{
|
|
i2c_del_driver(&jc42_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
|
|
MODULE_DESCRIPTION("JC42 driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(sensors_jc42_init);
|
|
module_exit(sensors_jc42_exit);
|