mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
![Tejun Heo](/assets/img/avatar_default.png)
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
368 lines
10 KiB
C
368 lines
10 KiB
C
/*
|
|
* Linux ARCnet driver - COM20020 chipset support
|
|
*
|
|
* Written 1997 by David Woodhouse.
|
|
* Written 1994-1999 by Avery Pennarun.
|
|
* Written 1999 by Martin Mares <mj@ucw.cz>.
|
|
* Derived from skeleton.c by Donald Becker.
|
|
*
|
|
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
|
|
* for sponsoring the further development of this driver.
|
|
*
|
|
* **********************
|
|
*
|
|
* The original copyright of skeleton.c was as follows:
|
|
*
|
|
* skeleton.c Written 1993 by Donald Becker.
|
|
* Copyright 1993 United States Government as represented by the
|
|
* Director, National Security Agency. This software may only be used
|
|
* and distributed according to the terms of the GNU General Public License as
|
|
* modified by SRC, incorporated herein by reference.
|
|
*
|
|
* **********************
|
|
*
|
|
* For more details, see drivers/net/arcnet.c
|
|
*
|
|
* **********************
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/init.h>
|
|
#include <linux/arcdevice.h>
|
|
#include <linux/com20020.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#define VERSION "arcnet: COM20020 chipset support (by David Woodhouse et al.)\n"
|
|
|
|
static char *clockrates[] =
|
|
{"10 Mb/s", "Reserved", "5 Mb/s",
|
|
"2.5 Mb/s", "1.25Mb/s", "625 Kb/s", "312.5 Kb/s",
|
|
"156.25 Kb/s", "Reserved", "Reserved", "Reserved"};
|
|
|
|
static void com20020_command(struct net_device *dev, int command);
|
|
static int com20020_status(struct net_device *dev);
|
|
static void com20020_setmask(struct net_device *dev, int mask);
|
|
static int com20020_reset(struct net_device *dev, int really_reset);
|
|
static void com20020_copy_to_card(struct net_device *dev, int bufnum,
|
|
int offset, void *buf, int count);
|
|
static void com20020_copy_from_card(struct net_device *dev, int bufnum,
|
|
int offset, void *buf, int count);
|
|
static void com20020_set_mc_list(struct net_device *dev);
|
|
static void com20020_close(struct net_device *);
|
|
|
|
static void com20020_copy_from_card(struct net_device *dev, int bufnum,
|
|
int offset, void *buf, int count)
|
|
{
|
|
int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
|
|
|
|
/* set up the address register */
|
|
outb((ofs >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
|
|
outb(ofs & 0xff, _ADDR_LO);
|
|
|
|
/* copy the data */
|
|
TIME("insb", count, insb(_MEMDATA, buf, count));
|
|
}
|
|
|
|
|
|
static void com20020_copy_to_card(struct net_device *dev, int bufnum,
|
|
int offset, void *buf, int count)
|
|
{
|
|
int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
|
|
|
|
/* set up the address register */
|
|
outb((ofs >> 8) | AUTOINCflag, _ADDR_HI);
|
|
outb(ofs & 0xff, _ADDR_LO);
|
|
|
|
/* copy the data */
|
|
TIME("outsb", count, outsb(_MEMDATA, buf, count));
|
|
}
|
|
|
|
|
|
/* Reset the card and check some basic stuff during the detection stage. */
|
|
int com20020_check(struct net_device *dev)
|
|
{
|
|
int ioaddr = dev->base_addr, status;
|
|
struct arcnet_local *lp = netdev_priv(dev);
|
|
|
|
ARCRESET0;
|
|
mdelay(RESETtime);
|
|
|
|
lp->setup = lp->clockm ? 0 : (lp->clockp << 1);
|
|
lp->setup2 = (lp->clockm << 4) | 8;
|
|
|
|
/* CHECK: should we do this for SOHARD cards ? */
|
|
/* Enable P1Mode for backplane mode */
|
|
lp->setup = lp->setup | P1MODE;
|
|
|
|
SET_SUBADR(SUB_SETUP1);
|
|
outb(lp->setup, _XREG);
|
|
|
|
if (lp->clockm != 0)
|
|
{
|
|
SET_SUBADR(SUB_SETUP2);
|
|
outb(lp->setup2, _XREG);
|
|
|
|
/* must now write the magic "restart operation" command */
|
|
mdelay(1);
|
|
outb(0x18, _COMMAND);
|
|
}
|
|
|
|
lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2);
|
|
/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
|
|
SETCONF;
|
|
outb(0x42, ioaddr + BUS_ALIGN*7);
|
|
|
|
status = ASTATUS();
|
|
|
|
if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) {
|
|
BUGMSG(D_NORMAL, "status invalid (%Xh).\n", status);
|
|
return -ENODEV;
|
|
}
|
|
BUGMSG(D_INIT_REASONS, "status after reset: %X\n", status);
|
|
|
|
/* Enable TX */
|
|
outb(0x39, _CONFIG);
|
|
outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7);
|
|
|
|
ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
|
|
|
|
status = ASTATUS();
|
|
BUGMSG(D_INIT_REASONS, "status after reset acknowledged: %X\n",
|
|
status);
|
|
|
|
/* Read first location of memory */
|
|
outb(0 | RDDATAflag | AUTOINCflag, _ADDR_HI);
|
|
outb(0, _ADDR_LO);
|
|
|
|
if ((status = inb(_MEMDATA)) != TESTvalue) {
|
|
BUGMSG(D_NORMAL, "Signature byte not found (%02Xh != D1h).\n",
|
|
status);
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
const struct net_device_ops com20020_netdev_ops = {
|
|
.ndo_open = arcnet_open,
|
|
.ndo_stop = arcnet_close,
|
|
.ndo_start_xmit = arcnet_send_packet,
|
|
.ndo_tx_timeout = arcnet_timeout,
|
|
.ndo_set_multicast_list = com20020_set_mc_list,
|
|
};
|
|
|
|
/* Set up the struct net_device associated with this card. Called after
|
|
* probing succeeds.
|
|
*/
|
|
int com20020_found(struct net_device *dev, int shared)
|
|
{
|
|
struct arcnet_local *lp;
|
|
int ioaddr = dev->base_addr;
|
|
|
|
/* Initialize the rest of the device structure. */
|
|
|
|
lp = netdev_priv(dev);
|
|
|
|
lp->hw.owner = THIS_MODULE;
|
|
lp->hw.command = com20020_command;
|
|
lp->hw.status = com20020_status;
|
|
lp->hw.intmask = com20020_setmask;
|
|
lp->hw.reset = com20020_reset;
|
|
lp->hw.copy_to_card = com20020_copy_to_card;
|
|
lp->hw.copy_from_card = com20020_copy_from_card;
|
|
lp->hw.close = com20020_close;
|
|
|
|
if (!dev->dev_addr[0])
|
|
dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8); /* FIXME: do this some other way! */
|
|
|
|
SET_SUBADR(SUB_SETUP1);
|
|
outb(lp->setup, _XREG);
|
|
|
|
if (lp->card_flags & ARC_CAN_10MBIT)
|
|
{
|
|
SET_SUBADR(SUB_SETUP2);
|
|
outb(lp->setup2, _XREG);
|
|
|
|
/* must now write the magic "restart operation" command */
|
|
mdelay(1);
|
|
outb(0x18, _COMMAND);
|
|
}
|
|
|
|
lp->config = 0x20 | (lp->timeout << 3) | (lp->backplane << 2) | 1;
|
|
/* Default 0x38 + register: Node ID */
|
|
SETCONF;
|
|
outb(dev->dev_addr[0], _XREG);
|
|
|
|
/* reserve the irq */
|
|
if (request_irq(dev->irq, arcnet_interrupt, shared,
|
|
"arcnet (COM20020)", dev)) {
|
|
BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev->base_addr = ioaddr;
|
|
|
|
BUGMSG(D_NORMAL, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
|
|
lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq);
|
|
|
|
if (lp->backplane)
|
|
BUGMSG(D_NORMAL, "Using backplane mode.\n");
|
|
|
|
if (lp->timeout != 3)
|
|
BUGMSG(D_NORMAL, "Using extended timeout value of %d.\n", lp->timeout);
|
|
|
|
BUGMSG(D_NORMAL, "Using CKP %d - data rate %s.\n",
|
|
lp->setup >> 1,
|
|
clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]);
|
|
|
|
if (register_netdev(dev)) {
|
|
free_irq(dev->irq, dev);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Do a hardware reset on the card, and set up necessary registers.
|
|
*
|
|
* This should be called as little as possible, because it disrupts the
|
|
* token on the network (causes a RECON) and requires a significant delay.
|
|
*
|
|
* However, it does make sure the card is in a defined state.
|
|
*/
|
|
static int com20020_reset(struct net_device *dev, int really_reset)
|
|
{
|
|
struct arcnet_local *lp = netdev_priv(dev);
|
|
u_int ioaddr = dev->base_addr;
|
|
u_char inbyte;
|
|
|
|
BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
|
|
__FILE__,__LINE__,__func__,dev,lp,dev->name);
|
|
BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n",
|
|
dev->name, ASTATUS());
|
|
|
|
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
|
|
lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2);
|
|
/* power-up defaults */
|
|
SETCONF;
|
|
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
|
|
|
|
if (really_reset) {
|
|
/* reset the card */
|
|
ARCRESET;
|
|
mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */
|
|
}
|
|
/* clear flags & end reset */
|
|
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
|
|
ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
|
|
|
|
/* verify that the ARCnet signature byte is present */
|
|
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
|
|
|
|
com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
|
|
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
|
|
if (inbyte != TESTvalue) {
|
|
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
|
|
BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
|
|
return 1;
|
|
}
|
|
/* enable extended (512-byte) packets */
|
|
ACOMMAND(CONFIGcmd | EXTconf);
|
|
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
|
|
|
|
/* done! return success. */
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void com20020_setmask(struct net_device *dev, int mask)
|
|
{
|
|
u_int ioaddr = dev->base_addr;
|
|
BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr);
|
|
AINTMASK(mask);
|
|
}
|
|
|
|
|
|
static void com20020_command(struct net_device *dev, int cmd)
|
|
{
|
|
u_int ioaddr = dev->base_addr;
|
|
ACOMMAND(cmd);
|
|
}
|
|
|
|
|
|
static int com20020_status(struct net_device *dev)
|
|
{
|
|
u_int ioaddr = dev->base_addr;
|
|
|
|
return ASTATUS() + (ADIAGSTATUS()<<8);
|
|
}
|
|
|
|
static void com20020_close(struct net_device *dev)
|
|
{
|
|
struct arcnet_local *lp = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
|
|
/* disable transmitter */
|
|
lp->config &= ~TXENcfg;
|
|
SETCONF;
|
|
}
|
|
|
|
/* Set or clear the multicast filter for this adaptor.
|
|
* num_addrs == -1 Promiscuous mode, receive all packets
|
|
* num_addrs == 0 Normal mode, clear multicast list
|
|
* num_addrs > 0 Multicast mode, receive normal and MC packets, and do
|
|
* best-effort filtering.
|
|
* FIXME - do multicast stuff, not just promiscuous.
|
|
*/
|
|
static void com20020_set_mc_list(struct net_device *dev)
|
|
{
|
|
struct arcnet_local *lp = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
|
|
if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { /* Enable promiscuous mode */
|
|
if (!(lp->setup & PROMISCset))
|
|
BUGMSG(D_NORMAL, "Setting promiscuous flag...\n");
|
|
SET_SUBADR(SUB_SETUP1);
|
|
lp->setup |= PROMISCset;
|
|
outb(lp->setup, _XREG);
|
|
} else
|
|
/* Disable promiscuous mode, use normal mode */
|
|
{
|
|
if ((lp->setup & PROMISCset))
|
|
BUGMSG(D_NORMAL, "Resetting promiscuous flag...\n");
|
|
SET_SUBADR(SUB_SETUP1);
|
|
lp->setup &= ~PROMISCset;
|
|
outb(lp->setup, _XREG);
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \
|
|
defined(CONFIG_ARCNET_COM20020_ISA_MODULE) || \
|
|
defined(CONFIG_ARCNET_COM20020_CS_MODULE)
|
|
EXPORT_SYMBOL(com20020_check);
|
|
EXPORT_SYMBOL(com20020_found);
|
|
EXPORT_SYMBOL(com20020_netdev_ops);
|
|
#endif
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#ifdef MODULE
|
|
|
|
static int __init com20020_module_init(void)
|
|
{
|
|
BUGLVL(D_NORMAL) printk(VERSION);
|
|
return 0;
|
|
}
|
|
|
|
static void __exit com20020_module_exit(void)
|
|
{
|
|
}
|
|
module_init(com20020_module_init);
|
|
module_exit(com20020_module_exit);
|
|
#endif /* MODULE */
|